Relevant bibliographies by topics / Gluing technology

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Gluing technology'

Author: Grafiati
Published: 3 June 2025
Last updated: 22 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Gluing technology.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Gluing technology"

1

Pak, Andrey, Vyacheslav Оnishchenko, Maryna Yancheva, et al. "Devising a technology for obtaining glued sausage casings from intestinal raw materials using electrophoresis." Eastern-European Journal of Enterprise Technologies 4, no. 11 (130) (2024): 67–75. http://dx.doi.org/10.15587/1729-4061.2024.308603.

Full text
Abstract:
The object of research is the technique for obtaining glued sausage casings, in which adhesive related structures and electrophoresis for tanning are used to glue the layers of intestinal raw materials. Devising a technique for gluing sausage casings from intestinal raw materials with the use of adhesive related structures by stitching by tanning, via intensified electrophoresis, has been substantiated. The technology of glued sausage casings from intestinal raw materials, which are classified as unclaimed residues and waste, has been proposed. The technology differs from known similar technologies by applying a technique for gluing intestinal membranes using an adhesive related construct and electrophoresis during tanning. The devised gluing technique and the device for its implementation make it possible to avoid violation of the integrity of the raw material, are universal in relation to it, and are easy to operate. The rational parameters of electrophoresis, which is used to accelerate the tanning process of the place of gluing of the layers of the intestinal membranes using an adhesive related construct, have been determined. The potential difference between the electrodes and the duration of exposure of the gluing site for gluing the original intestinal raw materials: pork belly, lamb belly, beef belly were determined. At a potential difference of 100 V, the duration of exposure of the gluing site for pork and lamb bellies is 17 minutes, and for beef bellies − 20 minutes. It is noted that the results differ in the duration of exposure of the gluing site, which is probably due to the thickness of the layer of the raw material. The proposed technology would contribute to improving the efficiency of the technology of glued sausage casings from intestinal raw materials and could be used at enterprises for the processing of agricultural products and the meat processing industry
APA, Harvard, Vancouver, ISO, and other styles
2

Kuczmaszewski, Józef, Mariusz Kłonica, Paweł Pieśko, and Ireneusz Zagórski. "Gluing in rapid prototyping technology." Mechanik, no. 12 (December 2015): 974/117–974/120. http://dx.doi.org/10.17814/mechanik.2015.12.569.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mardonov, Salokhiddin, Laziz Shokirov, and Khakim Rakhimov. "Development of technology for obtaining starch gluing modified with uzkhitan and hydrolyzed emulsion." Journal of Physics: Conference Series 2094, no. 4 (2021): 042070. http://dx.doi.org/10.1088/1742-6596/2094/4/042070.

Full text
Abstract:
Abstract In this article, in order to reduce the consumption of starch for gluing warp threads and reduce the cost of sizing materials used in sizing and improve the quality of threads, an effective gluing composition was created based on a hydrolyzed acrylic emulsion (GAE) and uzkhitan (chitosan and carboxymethyl cellulose), that is, corn starch polymer and studied their rheological properties. In the article, the main threads passing through the gluing process and moving at a certain speed, which are then impregnated with liquid gluing. Then they pass through a nip roller and a drying drum, are subjected to friction and form a layer of a certain thickness. A theoretical analysis of the surface of the warp threads is carried out to determine the change in the diameter of the threads when a layer of a certain thickness is formed on their surface.
APA, Harvard, Vancouver, ISO, and other styles
4

Petrova, A. P. "Main stages of gluing technology." Polymer Science Series D 7, no. 4 (2014): 293–97. http://dx.doi.org/10.1134/s1995421214040121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dektyarev, A. V., P. G. Zobov, G. R. Dzyunin, and V. N. Morozov. "On Geometry Deviations of the Small Vessel Components Obtained Using Additive Technologies." Proceedings of Higher Educational Institutions. Маchine Building, no. 7 (748) (July 2022): 24–32. http://dx.doi.org/10.18698/0536-1044-2022-7-24-32.

Full text
Abstract:
Currently, there is not enough data on the cumulative error in the geometric characteristics of large-sized objects assembled using the technology of gluing in parts. The hull of the small vessel "Nerl" was chosen as a large-sized object created by the FDM method. The deviations of the diameter along mutually perpendicular planes and the heights of the glued products were measured on the example of test specimens of a cylindrical shape and gluings from them. The field of tolerance for glued products made of polylactide was determined. Recommendations for designing large-sized products when printing in parts by the FDM method were issued. The causes for the appearance of geometric deviations of single parts and gluings are described. The main disadvantages of the FDM method related to manufacturing accuracy are considered. Causes of geometric deviations are divided into three groups. The first is related to the parameters of the product material (thermal expansion coefficient, uniformity of the rod and hygroscopicity), the second is related to its design (multiplicity of linear dimensions, layer height and motor pitch, filling parameters, the presence and size of overhanging elements), the third is related to the features of the additive installation ( calibration along the X, Y, and Z axis, extrusion drive calibration, extrusion unit design, acceleration and travel speed, and nozzle diameter). It was found that preparing the production of 3D printing of a large-sized object using the technology of gluing in parts, for example, the hull of a small vessel, it is necessary to additionally take into account the numerical parameters of the layers of adhesive joints.
APA, Harvard, Vancouver, ISO, and other styles
6

Cheng, Peng Fei, and Guang Hua Nie. "Extraction of Image Features on Tooth Flank Pitting and Gluing." Advanced Materials Research 760-762 (September 2013): 1505–9. http://dx.doi.org/10.4028/www.scientific.net/amr.760-762.1505.

Full text
Abstract:
Tooth flank pitting and gluing are principal forms of gear defect. The purpose of this research is to extract the image feature of the gear in the different defects by means of image processing technology. Firstly, the image was carried out denoising processing by median filtering and segmentation processing by use of OSTU method. Then, the pixel area was extracted as a feature to distinguish normal gear, tooth surface pitting and gluing, the inertia was extracted as image feature to detect pitting and gluing by Gray level co-occurrence matrix, and the morphological characteristics of the image were extracted. Image feature extraction of different defect form will help to establish an effective image recognition model.
APA, Harvard, Vancouver, ISO, and other styles
7

L, Solonenko, Repiakh S, Uzlov K, and Ivanova L. "Structured sand-sodium-silicate mixtures gluing with sodium silicate solute." Theory and practice of metallurgy, no. 3, 2021 (April 1, 2021): 48–55. http://dx.doi.org/10.34185/tpm.3.2021.07.

Full text
Abstract:
Purpose – method of gluing with pure silicon silicate solute (SSS) molds and cores made of structured sand-sodiumsilicate mixtures (SSSM) investigation, which solidification has been realized by microwave radiation, and engineering method for calculating the minimum admissible tensile strength of gluing joint for structured mixtures elaboration. Methodology. Quartz sand grade 1K3O3016 and RS (GOST 13078-81) with silicate modulus of 2.9 and specific density of 1.44 g/cm3 has been used in this study. Samples processing that were glued with microwave radiation have been carried out in microwave furnace with nominal magnetron power of 700 and 900W and radiation frequency of 2.45GHz.Mixtures tensile strength has been determined on LRu-2e device using figure-eight samples. Results. Method for minimum admissible tensile strength of gluing joint calculating has been developed. Taking into account its value in casting molds and rods manufacturing development will ensure molten-filled molds integrity and prevent rods displacement or separation installed in them. It has been established that pure silicon silicate solute can be used as gluing material solidifying by microwave radiation for bonding SSSM structured by steam-microwave solidification process (SMS-process).It has not been recommended to use SSS in original form as gluing material solidified by microwave radiation for bonding SSSM structured by convection heat drying. Scientific originality. For the first time, phenomenon of sodium silicate solute and quartz sand saturated with sodium silicate solute in structured SSSM simultaneous transfer during their treatment with steam-microwave radiation and new capillary-porous structures with sodium silicate increased content in them appearance have been established. Practical value. Method for calculating the gluing joint minimum permissible strength under tension will allow to obtain practical data, taking into account which, when casting molds and rods manufacturing technology developing, will ensure molds integrity when they are filled with melt and prevent rods installed in themd is placement or separation. This will generally improve castings quality. Pure SSS applying in casting molds and rods made by SMS-process gluing joints manufacturing will reduce castings production cost due to eliminating of other gluetypes using. Keywords: sodium silicate solute, microwave radiation, mold, rod, mixture, strength, gluing
APA, Harvard, Vancouver, ISO, and other styles
8

Karablikovas, Andrejus. "RESEARCH ON SEAMS FORMATION BETWEEN THE LAYERS OF GLUED BITUMINOUS ROOFING MEMBRANES AND ANALYSIS OF THEIR PARAMETERS." Technological and Economic Development of Economy 13, no. 2 (2007): 134–38. http://dx.doi.org/10.3846/13928619.2007.9637789.

Full text
Abstract:
Durability of roofs has been increased by using polymer bituminous material. The most serious problem is reliability of glued seams between the overlap of layers. By analysing this problem the mechanism of seams formation and impact of gluing technology on properties of durability and maintenance such as strength, thickness and appearance of unglued places are analysed. The final thickness of seams is regarded as an additional criterion for seam evaluation. The dependence of seam strength on heating duration of melted surfaces has been determined experimentally. It was found that the maximum strength of seams is about 15–20 % of bituminous roofing membranes and cannot be increased by a gluing technology. The solutions are suggested as practical means for increasing the durability of flat roof bituminous membranes.
APA, Harvard, Vancouver, ISO, and other styles
9

Solomko, Mykhailo. "Developing an algorithm to minimize boolean functions for the visual-matrix form of the analytical method." Eastern-European Journal of Enterprise Technologies 1, no. 4 (109) (2021): 6–21. http://dx.doi.org/10.15587/1729-4061.2021.225325.

Full text
Abstract:
This research has established the possibility of improving the effectiveness of the visual-matrix form of the analytical Boolean function minimization method by identifying reserves in a more complex algorithm for the operations of logical absorption and super-gluing the variables in terms of logical functions. An improvement in the efficiency of the Boolean function minimization procedure was also established, due to selecting, according to the predefined criteria, the optimal stack of logical operations for the first and second binary matrices of Boolean functions. When combining a sequence of logical operations using different techniques for gluing variables such as simple gluing and super-gluing, there are a small number of cases when function minimization is more effective if an operation of simply gluing the variables is first applied to the first matrix. Thus, a short analysis is required for the primary application of operations in the first binary matrix. That ensures the proper minimization efficiency regarding the earlier unaccounted-for variants for simplifying the Boolean functions by the visual-matrix form of the analytical method. For a series of cases, the choice of the optimal stack is also necessary for the second binary matrix. The experimental study has confirmed that the visual-matrix form of the analytical method, whose special feature is the use of 2-(n, b)-design and 2-(n, x/b)-design systems in the first matrix, improves the process efficiency, as well as the reliability of the result of Boolean function minimization. This simplifies the procedure of searching for a minimal function. Compared to analogs, that makes it possible to improve the productivity of the Boolean function minimization process by 100‒200 %. There is reason to assert the possibility of improving the efficiency of the Boolean function minimization process by the visual-matrix form of the analytical method, through the use of more complex logical operations of absorbing and super-gluing the variables. Also, by optimally combining the sequence of logical operations of super-gluing the variables and simply gluing the variables, based on the selection, according to the established criteria, of the stack of logical operations in the first binary matrix of the assigned function
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Jian Xia, and Liang Cai Wang. "Study on the Brush Plating Technology of Magnesium Alloy." Advanced Materials Research 659 (January 2013): 7–9. http://dx.doi.org/10.4028/www.scientific.net/amr.659.7.

Full text
Abstract:
This article is based on the magnesium alloy brush plating which is pretreated only by electro cleaning and not by activating. The process for brush plating mending of scratched surface of magnesium alloys parts which isn’t pretreated not only by electro cleaning and but also by activating is introduced．The merits of the technology that the plating is directly carried out after gluing the conductor colloid are discussed.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Gluing technology"

1

Berglund, Jonas. "Stark, starkare, starkast : en jämförelse av fasta tappar och centrumtappar med utgångspunkt i tappens dimensioner, inpassning, komprimering, antal och limning." Thesis, Linköpings universitet, Malmstens Linköpings universitet, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-152652.

Full text
Abstract:
I mitt examensarbete jämför jag styrkan för sammanfogningar i trämöbler med fasta tappar och centrumtappar utifrån fem parametrar: tappens dimensioner, tappens inpassning, tappens komprimering, tappens antal och tappens limning. Den övergripande frågan har varit, ”är fasta tappar eller centrumtappar starkast?” Målet har varit att sålla i olika teorier rörande dessa två typer av sammanfogningar och skapa ett underlag i syfte att hjälpa möbelsnickare och formgivare att kunna ta medvetna beslut vad gäller sina val av dessa typer av sammanfogningar. Genom litteraturstudier och verkstads besök har jag samlat kunskap som ligger till grund för det hållfasthets test jag sedan gjort i materiallabbet på Linköpings universitet. Testet har utgått från ett scenario där en stols bakben ska fogas samman med en sarg. Testet visar, utifrån ett antal angivna avgränsningar, att fasta tappar utan undantag är starkare än centrumtappar.Det visar också att en dubbel fast tapp fördelar belastningen bättre än en enkel fast tapp och bidrar till en betydligt starkare fog. För c-tappar gäller generellt att ökat antal tappar ökar fogens seghet men inte nödvändigtvis maxbelastningen. Inpassning och komprimering har betydelse för hur seg en fog är.<br>I have in my thesis compared the strength of mortise and tenon joints and dowel joints in wooden furniture. I´ve made the comparison based on five parameters: the dimensions of the tenon or dowel, the fit of the tenon or dowel, the compression of the tenon or dowel, the number of tenons or dowels and the gluing of the tenon or dowel. The bigger question has been, “is the mortise and tenon joint or the dowel joint the strongest?” The goal has been to go through different theories regarding these two types of joinery and making a foundation to help cabinet makers and designers to make conscious decisions regarding their choices of these two types of joinery. Through studies of literature and visiting workshops I´ve gathered knowledge that lies as a foundation for a test of strength of different joinery made in the material testing facility of Linköping University. The test was based on a scenario of joining the back leg and side rim of a chair. The test shows, from the given definitions, that mortise and tenon joints are without exceptions stronger than dowel joints. It also shows that double tenons better will distribute the load and make for a stronger and tougher joint. Dowel joints will get tougher with an increased number of dowels but it will not necessarily make for a stronger joint. The fit and compression of the tenon or dowel will affect the joints strength.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Gluing technology"

1

Williams, Derek. Assessment of Danish and Swedish wood gluing machine technology. Pacific Forestry Centre, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Gluing technology"

1

Alencar, P. S. C., D. D. Cowan, C. J. P. Lucena, and L. C. M. Nova. "A Model for Gluing Together." In Object-Oriented Technology: ECOOP’98 Workshop Reader. Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/3-540-49255-0_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Obucina, Murco, and Almir Akvic. "Influence of Gluing Technology on the Shear Strength in the Gluing of Solid Wood." In DAAAM Proceedings. DAAAM International Vienna, 2016. http://dx.doi.org/10.2507/26th.daaam.proceedings.026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Peng, Sheng, Shaohan Wang, Jianqiao Xu, and Gangfeng Ouyang. "Development of Solid-phase Microextraction Fiber Coatings." In Evolution of Solid Phase Microextraction Technology. The Royal Society of Chemistry, 2023. http://dx.doi.org/10.1039/bk9781839167300-00135.

Full text
Abstract:
The materials used for the fabrication of solid-phase microextraction fiber coatings are summarized in the current book chapter, including carbon, metal–organic frameworks, covalent organic frameworks, polymers, aerogels, ionic liquids/poly(ionic liquids), and metal oxides. The approaches for loading different coatings on fibers, such as sol–gel, in situ growth, electrodeposition, and gluing methods, are briefly discussed together with the evolution of the supporting substrates. In addition, the limitations of the current fiber coatings and the future development directions of solid-phase microextraction are presented. It is expected to provide important instructions for the selection of appropriate fiber coating materials for target application.
APA, Harvard, Vancouver, ISO, and other styles
4

"One Component Polyurethane Adhesives for Green Wood Gluing: Creep and Temperature-Dependent Creep." In International Conference on Mechanical Engineering and Technology (ICMET-London 2011). ASME Press, 2011. http://dx.doi.org/10.1115/1.859896.paper24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Yang. "Managing Enterprise Service Level Agreement." In Innovations in Logistics and Supply Chain Management Technologies for Dynamic Economies. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-0267-0.ch012.

Full text
Abstract:
The continued trend of globalization and technology improvement like the internet and transportation have spawned an increasing number of complex service chains that span across local, regional and national boundaries. Service level agreement (SLA) plays a crucial role in gluing service chains together. In that regard, this paper provides a complete guidance of end-to-end lifecycle management of SLA, including SLA-aware service modelling and terms optimization, contract drafting and compliance tracking. Among these, the author introduces his work in the area of enterprise SLA optimization to address existing deficiencies in this area including a roadmap for industry-strength SLA optimization capability and an initial version of SLA modeling and optimization toolset—code-named SLA-OASIS. Some out-of-box toolsets for SLA contract drafting and compliance tracking are also introduced.
APA, Harvard, Vancouver, ISO, and other styles
6

Trad, Antoine, and Damir Kalpić. "The Business Transformation and Enterprise Architecture Framework." In Regaining Global Stability After the Financial Crisis. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-4026-7.ch002.

Full text
Abstract:
A business transformation project or an innovative enterprise architecture project is needed for the enterprise's business and financial strategic planning process and to prepare this business enterprise to integrate into the globally interconnected economy in a whole and robust manner. The integration of financial engineering and information technologies is fundamental, where the latter is the gluing element that makes this fine-grained environment run efficiently. Today, these finance-related technology standards and fields are ready and can be applied as automated block-chains to enable the traditional business environments as a part of the networked global economy. An important factor in frequent business transformation projects' changes and financial reengineering iterations are the roles of the business transformation manager, project managers, finance analysts, the business environment's technological maturity, and enterprise architect(s) who should be supported by the optimal business transformation framework.
APA, Harvard, Vancouver, ISO, and other styles
7

Anjum Ashiq, Bloodsworth Peter, Habib Irfan, Lansdale Tom, Mcclatchey Richard, and Mehmood Yasir. "Reusable Services from the neuGRID Project for Grid-Based Health Applications." In Studies in Health Technology and Informatics. IOS Press, 2009. https://doi.org/10.3233/978-1-60750-027-8-283.

Full text
Abstract:
By abstracting Grid middleware specific considerations from clinical research applications, re-usable services should be developed that will provide generic functionality aimed specifically at medical applications. In the scope of the neuGRID project, generic services are being designed and developed which will be applied to satisfy the requirements of neuroscientists. These services will bring together sources of data and computing elements into a single view as far as applications are concerned, making it possible to cope with centralised, distributed or hybrid data and provide native support for common medical file formats. Services will include querying, provenance, portal, anonymization and pipeline services together with a &amp;lsquo;glueing&amp;rsquo; service for connection to Grid services. Thus lower-level services will hide the peculiarities of any specific Grid technology from upper layers, provide application independence and will enable the selection of &amp;lsquo;fit-for-purpose&amp;rsquo; infrastructures. This paper outlines the design strategy being followed in neuGRID using the glueing and pipeline services as examples.
APA, Harvard, Vancouver, ISO, and other styles
8

Montgomery Kevin, Bruyns Cynthia, Brown Joel, et al. "Spring: A General Framework for Collaborative, Real-time Surgical Simulation." In Studies in Health Technology and Informatics. IOS Press, 2002. https://doi.org/10.3233/978-1-60750-929-5-296.

Full text
Abstract:
We describe the implementation details of a real-time surgical simulation system with soft-tissue modeling and multi-user, multi-instrument, networked haptics. The simulator is cross-platform and runs on various Unix and Windows platforms. It is written in C++ with OpenGL for graphics; GLUT, GLUI, and MUI for user interface; and supports parallel processing. It allows for the relatively easy introduction of patient-specific anatomy and supports many common file formats. It performs soft-tissue modeling, some limited rigid-body dynamics, and suture modeling. The simulator interfaces to many different interaction devices and provides for multi-user, multi-instrument collaboration over the Internet. Many virtual tools have been created and their interactions with tissue have been implemented. In addition, a number of extra features, such as voice input/output, real-time texture-mapped video input, stereo and head-mounted display support, and replicated display facilities are presented.
APA, Harvard, Vancouver, ISO, and other styles
9

Akisheva, Alina, and Iryna Valivodz. "DOCKING ANALYSIS OF THE INTERACTION OF PROPOXAZEPAM WITH BIOTARGETS THAT REGULATE ITS MECHANISM OF ACTION AND PHARMACOLOGICAL ACTIVITY." In Science, technology and innovation in the modern world. Publishing House “Baltija Publishing”, 2023. http://dx.doi.org/10.30525/978-9934-26-364-4-7.

Full text
Abstract:
One of 1.4-benzodiazepine 3-alcoxy derivatives – propoxazepam, possessing high analgetic action, also effectively suppresses experimental seizures of different etiology. Unexpected combination of pharmacological spectrum components suggests its different binding sites of GABAA receptor subunits.The aim of the work was docking analysis of the interaction of Propoxazepam with biotargets that mediate its mechanism of action and pharmacological activity (using experimental data of the propoxazepam conformation and calculated data for the three-dimensional structure of the ligand-binding site and subsequent docking to characterize its binding to this receptor)/Materials and methods. X-ray diffraction studies of the compound were performed using Xcalibur 3 single crystal X-ray diffractometer. Calculation of the molecular docking parameters was performed using the iGEMDOCK v2.1 program for the GABA receptor (GABA (A) R-beta3 homopentamer, 4COF), the molecular structures of propoxazepam conformers were prepared using ChemAxon (MarvinSketch 17.11.0); study the binding energy of the TRPV1 receptor with the researched compounds, PDB: 8GFA – Cryo-EM structure of human TRPV1 in complex with the analgesic drug SB-366791 was used. The protein was modelled by using Protein Preparation of Schrodinger Suite; the protein structure was prepared by adding hydrogen atoms, optimizing hydrogen bonds. The ligands were prepared by LigPrep module of Schrödinger suite before proceeding for docking. The ligands were minimized using OPLS4 force field in Schrödinger suite. The docking and QSAR prediction were carried out with propoxazepam, SB-366791, RTX, capsazepin, capsaicin, diazepam, oxazepam, 3-hydroxopropoxazepam. To study the effect of the studied ligands on the NMDA receptor, it was used PDB:7EU7 – structure of the human GluN1-GluN2A NMDA receptor in complex with S-ketamine, glycine and glutamate.Results. Based on the X-ray diffraction analysis, the coordinates of the atoms, bond lengths and valence angles in the propoxazepam molecule were calculated, it was found that it forms crystallographic twins as racemate. The molecular docking method showed that propoxazepam has several binding sites with the energy of complex formation from -78.64 to -85.29 kcal/mol exist on the isolated site of the GABA-receptor. The docking score of propoxazepam (-7.30 kcal/mol) indicates a stronger interaction with the TRPV1 receptor compared to oxazepam (-6.82 kcal/mol), 3-hydroxopropoxazepam (-6.49 kcal/mol), and capsazepin (-6.39 kcal/mol). Propoxazepam creates hydrogen bond with TYR 511 of the TRPV1 receptor as referent ligand SB-366791.Conclusions. The highest contribution to the formation of the bond of the complex is carried out by residues of polar amino acids (serine, asparagine, methionine and arginine in polar binding sub-center). However, also for individual conformers, aromatic amino acids, predominantly phenylalanine (Phe-31, Ala-135 – hydrophobic binding sub-center) make a significant contribution. According to QSAR modelling, all studied compounds (3-hydroxopropoxazepam, diazepam, oxazepam, propoxazepam) have low pIC50 values, which could indicate a relatively low potency or affinity for TRPV1. The computational prediction, propoxazepam has one of the highest docking scores for (-6.77 kcal/mol), kynurenic acid (-6.60 kcal/mol), ketamine (5,34 kcal/mol) and N-methyl-D-aspartate (-4.32 kcal/mol). As a result of docking with the above ligands, it can be noted that most often a hydrogen bond was formed between Asn 616 with the carbonyl group (H acceptor) or the secondary amine group and Phe 613 with the secondary amine group. The best pharmacophore (AHHR1) has been selected based on ketamine structure, which consist of H-bond acceptor site (A1), H-hydrophobic sites (H3, H2) and an aromatic ring (R5).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Gluing technology"

1

Roessler, Carina, Martin Riegler, and Felix Breitenecker. "Chipboard Production: Simulation of the Gluing Process." In University for Business and Technology International Conference. University for Business and Technology, 2018. http://dx.doi.org/10.33107/ubt-ic.2018.334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sharygin, N., Tatyana Ishchenko, and E. Ishchenko. "THE TECHNOLOGY OF FINISHING THE HONEYCOMB PANELS OF THE INTERIOR WITH NATURAL VENEER." In ENERGY-SAVING AND ENVIRONMENTALLY FRIENDLY TECHNOLOGIES IN THE FORESTRY INDUSTRY. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2025. https://doi.org/10.58168/e-seftfi2024_235-237.

Full text
Abstract:
This article discusses the technology of finishing interior panels with natural veneer. The process of panel preparation, veneer application, gluing and finishing with paint and varnish materials is described. Attention is paid to the quality control of finishing and the necessary conditions for the work.
APA, Harvard, Vancouver, ISO, and other styles
3

Guc, I., Ekaterina Kantieva, and Larisa Ponomarenko. "OVERVIEW OF WAYS TO IMPROVE THE QUALITY OF GLUED WOOD MATERIALS." In Ecological and resource-saving technologies in science and technology. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2022. http://dx.doi.org/10.34220/erstst2021_60-66.

Full text
Abstract:
To increase the efficiency of wood use, its gluing is widely used. The most widespread are such slab materials as chipboard and wood-fiber boards, plywood, furniture board and others. But glued materials do not always have the necessary physical and mechanical properties. In order to improve these properties, glued materials are being modified in various ways. This article provides a review of scientific papers on the use of nano-additives to improve the quality of various glued materials.
APA, Harvard, Vancouver, ISO, and other styles
4

Buksans, Edgars, and Ilze Kalnina. "Improvement of reaction to fire performance of birch plywood by veneer soaking method." In 23rd International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering and Information Technologies, 2024. http://dx.doi.org/10.22616/erdev.2024.23.tf087.

Full text
Abstract:
This research paper presents a study on improving the reaction to fire performance of birch plywood. Birch plywood finds wide application in various industries, particularly in construction, where it is used for decorative panelling, structural purposes, and panels with acoustic properties. However, one obstacle to the standard use of plywood in these applications is its reaction to fire performance. In many countries, fire safety regulations require plywood products to comply with B-s1,d0 class standards. The objective of this research was to elevate the natural reaction to fire performance level of birch plywood from D-s1,d0 to B-s1,d0 class, as per EN 13501-1:2018 standards. To achieve this goal, were investigated the highest level of fire protection technology available. The approach involved fire impregnation technology, wherein each individual veneer was soaked in two different fire-retardant solutions before gluing. Two soaking technologies were explored, with veneers being dried in industrial veneer dryers after impregnation. Plywood samples were produced at an experimental scale using laboratory press but adhered fully to industrial-scale gluing technology. The reaction to fire performance was evaluated using the single burning item test method prescribed by EN 13823:2020, which is the primary method for assessing reaction to fire performance according to EN 13501-1:2018 standard. The research yielded a potential fire protection technology capable of achieving B-s1,d0 compliant birch plywood. Both dry veneer soaking and wet veneer soaking technologies showed promise in achieving the desired reaction to fire performance. However, several technological aspects, such as the type of fire retardant, liquid concentration level, temperature, and the soaking time, need to be fine-tuned for optimal results.
APA, Harvard, Vancouver, ISO, and other styles
5

Ryu, Geunsoo, Zheng-Dong Ma, and Gregory M. Hulbert. "A Partitioned Iteration Method Employing CG-Following Reference Frames for Distributed Simulation of Flexible Multibody Systems." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34711.

Full text
Abstract:
A distributed simulation platform, denoted as D-Sim, has been developed previously by our research group, which comprises three essential attributes: a general XML description for models suitable for both leaf and integrated models, a gluing algorithm, which only relies on the interface information to integrate subsystem models, and a logical distributed simulation architecture that can be realized using any connection-oriented distributed technology. The overarching research focus is to integrate heterogeneous subsystem models, e.g., multibody dynamics subsystems models and finite element subsystems models and to conduct seamlessly integrated simulation and design tasks in a distributed computing environment. A Partitioned Iteration Method (PIM) is proposed in this paper, which decouples the rigid body motion from elastic deformation of the simulated system using an iteration scheme. The method employs a CG-following reference frame for each deformable body in the distributed simulation of flexible multibody systems. The resultant simulation system can be used to integrate distributed deformable bodies D-Sim, while allowing large rigid body motions among the bodies or subsystems. It also enables using independent simulation servers; where each server can run commercially available or research-based MBD and/or FEM codes. Examples are provided that demonstrate the performance of the method and also how to decouple and integrate rigid body motion and elastic deformation using the developed gluing algorithm.
APA, Harvard, Vancouver, ISO, and other styles
6

Aguilera, N. B. Palacios, J. R. Mollinger, J. Bastemeijer, J. Zhou, P. J. French, and A. Bossche. "Limitations of gluing as a replacement of ultrasonic welding: Attaching Lithium battery contacts to PCBs." In 2011 6th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT). IEEE, 2011. http://dx.doi.org/10.1109/impact.2011.6117184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lushnikova, Elena, and A. Tinkov. "MODIFICATION OF ADHESIVES BY PROCESSING WITH A WAVE FIELD IN ORDER TO INCREASE THE STRENGTH OF WOODEN STRUCTURES." In Ecological and resource-saving technologies in science and technology. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2022. http://dx.doi.org/10.34220/erstst2021_129-132.

Full text
Abstract:
In modern economic conditions, there is a need to solve the problem of import substitution of expensive foreign adhesives with domestic ones. The solution of this problem has led to the possibility of using various modifications of polymer adhesives. Modern wood processing plants widely use gluing operations. The strength of the adhesive joints is the main criterion for the quality of the adhesive structure. Due to the fact that glued wooden structures experience increased mechanical loads, the quality criterion of adhesive joints is especially important. To solve the problem of import substitution of foreign adhesives with domestic ones, it is necessary first of all to solve the problem of reliability of the adhesive joint. The most effective and real, as recent studies show, is a technological method based on the effects of wave fields on the glue.
APA, Harvard, Vancouver, ISO, and other styles
8

Ohrenberg, Joost, Sina Rahlfs, and Franz Dietrich. "High-Speed-Gluing in Battery Cell Manufacturing: Structured Analysis and Roadmap for elevating the Technology-Readiness-Level." In 2024 1st International Conference on Production Technologies and Systems for E-Mobility (EPTS). IEEE, 2024. http://dx.doi.org/10.1109/epts61482.2024.10586736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Aguilera, N. B. Palacios, J. R. Mollinger, J. Bastemeijer, J. Zhou, P. J. French, and A. Bossche. "Gluing as an alternative to solder flexible batteries for its use in system-in-a-package: Preliminary results." In 2009 11th Electronics Packaging Technology Conference (EPTC). IEEE, 2009. http://dx.doi.org/10.1109/eptc.2009.5416486.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ponomarenko, Larisa, and Ekaterina Kantieva. "ASPECTS OF ADHESIVES FOR EDGING FURNITURE BOARDS." In ENERGY-SAVING AND ENVIRONMENTALLY SAFE TECHNOLOGIES OF THE TIMBER INDUSTRY – 2025. FSBE Institution of Higher Education Voronezh State University of Forestry and Technologies named after G.F. Morozov, 2025. https://doi.org/10.58168/e-sestti2025_121-128.

Full text
Abstract:
The production of cabinet furniture from sheet materials is the most popular in the furniture market. Cabinet furniture surrounds us in everyday life, at work, in educational and public organizations, places of rest. Requirements for furniture products are constantly increasing and require constant improvement of technologies, equipment and, of course, materials. The paper presents an analysis of adhesives for gluing edges to furniture boards. Positive and negative features of hot melt adhesives are shown. The technology has a large selection of adhesives by price, ease of use, strength of adhesion and there is an opportunity to choose worthy adhesives for different categories of furniture.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Gluing technology' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography