Academic literature on the topic 'Golf mower'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Golf mower.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Golf mower"

1

Grossi, Nicola, Marco Fontanelli, Christian Frasconi, Luisa Martelloni, Michele Raffaelli, Andrea Peruzzi, Monica Gaetani, et al. "Effects of close cutting on ground cover and quality of a polystand of Manilagrass and cool season turfgrasses." Italian Journal of Agronomy 14, no. 1 (March 19, 2019): 59–65. http://dx.doi.org/10.4081/ija.2019.1378.

Full text
Abstract:
Warm season turfgrasses can be grown successfully in the transition zone, but dormancy occurs to some extent during the winter. Overseeding with cool-season turfgrasses is necessary if winter dormancy of warm season turfgrasses is not tolerated. The increasing availability of zoysiagrass cultivars has enabled this genus to be considered suitable for low-maintenance golf courses, especially for golf tees and golf fairways. On the other hand, zoysiagrasses have the most rigid leaves of all turfgrass species, followed by bermudagrasses and by the other warm season turf species. Thus, to have a high mowing quality, mowers working constantly on zoysiagrasses require more sharpening than mowers working on other grasses. Rotary mowers are not suitable for mowing at low heights and often result in scalping, while reel mowers perform optimal mowing at a short height (below 2.5 cm) but require accurate management and frequent sharpening. Autonomous mowers have proven to produce a superior turf quality compared with traditional walk-behind rotary mowers, but no autonomous mower has ever been tested at a low mowing height on an overseeded warm season turfgrass. Because of this, the trial was carried out to simulate a golf tee overseeded with cool season turfgrasses, with low input fertilisation rates and with one of the most difficult turf species to mow; i.e. Zoysia matrella (L.) Merr. The trial was carried out in San Piero a Grado (Pisa, Italy) from October 2016 to October 2018. After a two-year period the best turf quality was achieved with Festuca rubra L. ssp. cultivars among the overseeded species, especially during fall. In many cases turf quality increased after manila grass green up since the combination of both cool season and warm season species gave a higher quality to the turfgrass, due to the finer leaf texture and higher shoot density of some cool season species. Moreover, recovery of manila grass ground cover was satisficing. In conclusion, a polystand of manila grass and Festuca rubra ssp. could be suitable for golf tees with low-input management.
APA, Harvard, Vancouver, ISO, and other styles
2

Sanchez, Julian, C. Travis Bowles, Wendy A. Rogers, and Arthur D. Fisk. "Human Factors Goes to the Golf Course: Knowledge Engineering of Commercial Mowing." Ergonomics in Design: The Quarterly of Human Factors Applications 14, no. 3 (July 2006): 17–23. http://dx.doi.org/10.1177/106480460601400305.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Miltner, Eric D., Gwen K. Stahnke, Geoffrey J. Rinehart, and Paul A. Backman. "Seeding of Creeping Bluegrass into Existing Golf Course Putting Greens." HortScience 40, no. 2 (April 2005): 457–59. http://dx.doi.org/10.21273/hortsci.40.2.457.

Full text
Abstract:
The recent release of `True-Putt' (previously `DW-184') creeping bluegrass [Poa annua L. f. reptans (Hauskins) T. Koyama] gives turfgrass managers a new option for seeding into annual bluegrass (Poa annua L.) greens. Because little is known about the culture and management of this newly available seeded cultivar, effective methods for seedling establishment into existing turfgrass canopies, both living and dead, were studied. Four surface cultivation treatments were compared for seedbed preparation before seeding into an existing turfgrass canopy. When seeding into dead turf, two passes with vertical mowing units were more effective than hollow-tine cultivation (HTC), solid-tine cultivation (STC), one pass with the vertical mower plus STC, and the uncultivated control during the first year. Differences were not significant during the second year, most likely because of shallower depth of the vertical mower. Plots averaged about 75% cover by 4 weeks after planting during both years, illustrating the rapid establishment potential for `True-Putt'. After seeding into a live turf canopy, seedlings were indistinguishable from the existing turf, making it impossible to evaluate establishment success.
APA, Harvard, Vancouver, ISO, and other styles
4

Liao, Juinne-Ching, Shun-Hsing Chen, Zi-Yi Zhuang, Bo-Wei Wu, and Yu-Jen Chen. "Designing and Manufacturing of Automatic Robotic Lawn Mower." Processes 9, no. 2 (February 15, 2021): 358. http://dx.doi.org/10.3390/pr9020358.

Full text
Abstract:
This study is about the manufacturing of a personified automatic robotic lawn mower with image recognition. The system structure is that the platform above the crawler tracks is combined with the lawn mower, steering motor, slide rail, and webcam to achieve the purpose of personification. Crawler tracks with a strong grip and good ability to adapt to terrain are selected as a moving vehicle to simulate human feet. In addition, a lawn mower mechanism is designed to simulate the left and right swing of human mowing to promote efficiency and innovation, and then human eyes are replaced by Webcam to identify obstacles. A human-machine interface is added so that through the mobile phone remote operation, users can choose a slow mode, inching mode, and obstacle avoidance mode on the human-machine interface. When the length of both sides of the rectangular area is input to the program, the automatic robotic lawn mower will complete the instruction according to the specified path. The chip of a Digital Signal Processor (DSP) TMS320F2808 is used as the core controller, and Raspberry Pi is used as image recognition and human-machine interface design. This robot can reduce labor costs and improve the efficiency of mowing by remote control. In addition to the use as an automatic mower on farms, this study concept can also be used in the lawn maintenance of golf courses and school playgrounds.
APA, Harvard, Vancouver, ISO, and other styles
5

Baldwin, Christian M., Haibo Liu, Lambert B. McCarty, Hong Luo, Joe Toler, and Steven H. Long. "Winter Foot and Equipment Traffic Impacts on a ‘L93’ Creeping Bentgrass Putting Green." HortScience 43, no. 3 (June 2008): 922–26. http://dx.doi.org/10.21273/hortsci.43.3.922.

Full text
Abstract:
Creeping bentgrass (Agrostis stolonifera var. palustris Huds.) is desirable as a putting green turfgrass in the transition zone as a result of year-round green color, ball roll, and playability. However, management challenges exist for bentgrass greens, including winter temperature fluctuations. Frosts often cause cancellations or delays of tee time resulting in lost revenue. In response to this winter golf course management issue, a research project was initiated at Clemson University from 1 Dec. 2005 and 2006 to 1 Aug. 2006 and 2007 on a ‘L93’ creeping bentgrass putting green to determine the impacts of foot traffic or mower traffic and time of traffic application on bentgrass winter performance. Treatments consisted of no traffic (control), foot traffic, and walk-behind mower traffic (rolling) at 0700 and 0900 hr when canopy temperatures were at or below 0 °C. Foot traffic included ≈75 steps within each plot using size 10 SP-4 Saddle Nike golf shoes (soft-spiked sole) administered by a researcher weighing ≈75 kg. A Toro Greensmaster 800 walk-behind greens mower weighing 92 kg with a 45.7-cm roller was used for rolling traffic. Data collected included canopy and soil temperatures (7.6 cm depth), visual turfgrass quality (TQ), clipping yield (g·m−2), shoot chlorophyll concentration (mg·g−1), root total nonstructural carbohydrates (TNC) (mg·g−1), soil bulk density (g·cm−3), and water infiltration rates (cm·h−1). Time and type of traffic significantly influenced bentgrass winter performance. On all TQ rating dates, 0700 hr rolling traffic decreased TQ by ≈1.1 units compared with foot traffic at 0700 hr. In December, regardless of traffic application time, rolling traffic reduced bentgrass shoot growth ≈17%. However, in February, chlorophyll, soil bulk density, and water infiltration differences were not detected. By the end of March, all treatments had acceptable TQ. Root TNC was unaffected in May, whereas shoot chlorophyll concentrations were unaffected in May and August. This study indicates bentgrass damage resulting from winter traffic is limited to winter and early spring months and full recovery should be expected by summer.
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Ruying, James W. Hempfling, Bruce B. Clarke, and James A. Murphy. "Sand Size Affects Topdressing Removed by Mowing and Anthracnose on Annual Bluegrass Putting Green Turf." HortScience 55, no. 2 (February 2020): 237–43. http://dx.doi.org/10.21273/hortsci14396-19.

Full text
Abstract:
Sand size can affect the ability to incorporate topdressing into the turf canopy and thatch on golf course putting greens; unincorporated sand interferes with mowing and play. This 3-year field trial was initiated to determine the effects of sand size on sand incorporation, surface wetness, and anthracnose (caused by Colletotrichum cereale Manns sensu lato Crouch, Clarke, and Hillman) of annual bluegrass [Poa annua L. f. reptans (Hausskn) T. Koyama] maintained as a putting green. The experimental design was a randomized complete block with four replications; treatments included a non-topdressed control and three topdressing sands (medium-coarse, medium, or medium-fine) applied every 2 weeks at 0.15 L·m−2 during the summer. Topdressing with medium-coarse sand was more difficult to incorporate than the medium and medium-fine sands, resulting in a greater quantity of sand collected with mower clippings. Analyzing the particle distribution of sand removed by mowing confirmed that coarser sand particles were more likely to be removed in mower clippings. Surface wetness measured as volumetric water content (VWC) at the 0- to 38-mm depth zone was greater in non-topdressed plots than topdressed plots on 35% of observations. Few differences in VWC were found among sand size treatments. Turf responses to topdressing were not immediate; however, as sand accumulated in the turf canopy, topdressed plots typically had lower anthracnose severity than non-topdressed turf after the first year. Additionally, topdressing with medium and medium-fine sands produced similar or occasionally lower disease severity than topdressing with medium-coarse sand. The lack of negative effects of medium and medium-fine sands combined with better incorporation after topdressing and less disruption to the putting surface should allow golf course superintendents to apply topdressing at frequencies and/or quantities needed during the summer to maintain high-quality turf and playing conditions.
APA, Harvard, Vancouver, ISO, and other styles
7

Jo, Young-Ki, and David R. Smitely. "Impact of Soil Moisture and Mowing Height on Ataenius spretulus (Coleoptera: Scarabaeidae) Selection of Golf Course Turf Habitat in Choice Tests." HortScience 41, no. 2 (April 2006): 459–62. http://dx.doi.org/10.21273/hortsci.41.2.459.

Full text
Abstract:
Ataenius spretulus (Haldeman) (Coleoptera: Scarabaeidae) is the most common grub in golf course fairways in Michigan. Ataenius spretulus grubs are 3- to 10-fold more abundant in golf course fairways (mowed at a height of 1.5 cm) than in the roughs (mowed at a height of 5.0 cm or higher). Predation and infection by Paenibacillus sp. were previously reported to be greater in the rough, and may partially explain outbreaks of A. spretulus grubs in golf course fairways. In addition to natural enemies, cultural practices of irrigation and mowing could also be important factors, especially if A. spretulus prefers to oviposit in the fairway over the rough. In this paper we examine the impact of soil moisture and mowing height on oviposition and habitat selection. In a greenhouse experiment where A. spretulus adults were given a choice of turf maintained at fairway or rough height, no ovipositional preference for one or the other was observed. In three different growth chamber experiments where adults were allowed to choose among fairway or rough turf plugs held in soil at different moisture levels, adults preferred turf plugs in soil at a volumetric moisture content of 13% to 26% over turf plugs in soil at 8% to 9% moisture for their habitat selection. We conclude from these greenhouse and growth chamber experiments that A. spretulus adults do not choose turf habitat based on mowing height, but may be influenced by soil moisture levels.
APA, Harvard, Vancouver, ISO, and other styles
8

Henry, Gerald M., Michael G. Burton, and Fred H. Yelverton. "Effect of Mowing on Lateral Spread and Rhizome Growth of TroublesomePaspalumSpecies." Weed Science 55, no. 5 (October 2007): 486–90. http://dx.doi.org/10.1614/ws-07-030.1.

Full text
Abstract:
The effect of mowing regime on lateral spread and rhizome growth of dallisgrass and bahiagrass was determined in field studies conducted in 2003 and 2004 in North Carolina over 5 mo. Treatments were selected to simulate mowing regimes common to intensively managed common bermudagrass turfgrass and include 1.3-, 5.2-, and 7.6-cm heights at frequencies of three, two, and two times per week, respectively. A nonmowed check was included for comparison. Lateral spread of dallisgrass was reduced 38 to 47% regardless of mowing regime when compared with the nonmowed check. Rhizome fresh weight of dallisgrass was reduced 49% in 2003 and 30% in 2004 when mowed at the 7.6-cm regime after 5 mo, whereas the 5.2-cm mowing regime caused a reduction of 31%. Rhizome fresh weight of dallisgrass was most negatively affected by the 1.3-cm regime, which caused reductions of 57% in 2003 and 37% in 2004. Lateral spread of bahiagrass was more strongly affected by mowing height and frequency than dallisgrass, with reductions of 21 to 27%, 40%, and 44 to 62% when mowed at 7.6, 5.2, and 1.3-cm regimes, respectively. Rhizome fresh weight of bahiagrass was reduced 24 to 33%, 55%, and 70 to 73% when mowed at 7.6, 5.2, and 1.3 cm, respectively. Based upon these results, areas mowed at a golf course rough height (≥ 5.2 cm) may be more conducive to bahiagrass spread, whereas dallisgrass may tolerate areas mowed at a fairway height (1.3 cm). Mowing at the shorter heights examined in this study clearly reduced the potential ofPaspalumspp. vegetative spread and may help to explain observed distributions ofPaspalumspp. infestations in bermudagrass turfgrass.
APA, Harvard, Vancouver, ISO, and other styles
9

McCarty, Lambert B. "Goosegrass (Eleusine indica) Control in Bermudagrass (Cynodonspp.) Turf by Diclofop." Weed Science 39, no. 2 (June 1991): 255–61. http://dx.doi.org/10.1017/s0043174500071575.

Full text
Abstract:
Greenhouse and field experiments were performed to investigate diclofop rate and mowing height interactions on goosegrass control and ‘Tifgreen’ and ‘Tifdwarf’ bermudagrass tolerance. In greenhouse experiments, greatest goosegrass control was achieved with diclofop when plants were maintained at 1.3 cm. Increased diclofop rates were required to suppress goosegrass mowed higher than 1.3 cm or unmowed. Greater than 90% goosegrass control was achieved with the combination of 1.3-cm mowing height and 0.6 kg ai ha–1of diclofop. In field experiments, a minimum of 2 weeks was necessary for complete herbicidal activity. Diclofop at 1.1 kg ha–1provided >90% control of goosegrass mowed between 1.9 to 2.5 cm. The addition of nonionic surfactant (0.25% by vol) to diclofop did not influence control. The addition of metribuzin (0.1 kg ai ha–1) to diclofop resulted in initial increased control, but it was transient The addition of MSMA (2.2 kg ai ha–1) to diclofop reduced goosegrass control an average of 18% compared to diclofop treatments alone. Tifdwarf bermudagrass was more sensitive to diclofop compared to Tifgreen. Seven to 14 days were required for Tifdwarf to recover from initial injury. This injury, although significant, was acceptable for bermudagrass used for golf greens. Clipping weights following treatment were also less for Tifdwarf than Tifgreen.
APA, Harvard, Vancouver, ISO, and other styles
10

Huang, Yu, John E. Kaminski, and Peter J. Landschoot. "Regulation with Trinexapac-ethyl and Dew Removal at the Time of Fungicide Application Did Not Influence Dollar Spot Control." HortScience 50, no. 3 (March 2015): 496–500. http://dx.doi.org/10.21273/hortsci.50.3.496.

Full text
Abstract:
Dollar spot, caused by Sclerotinia homoeocarpa F.T. Bennett, is an important disease of creeping bentgrass (Agrostis stolonifera L.) on golf courses in the northern United States. Canopy moisture in the form of dew plays an important role in the development of dollar spot and routine displacement has been shown to reduce disease severity. The use of plant growth regulators (PGRs) is a common management practice for maintaining creeping bentgrass fairways, but their influence on dollar spot is unclear. The objective of this field study was to elucidate the influence of dew removal at the time of fungicide application on dollar spot control in creeping bentgrass regulated by trinexapac-ethyl (TE). Main factors in the study included three dew removal strategies (non-treated, dew removed–mowed, and dew removed–not mowed) before the application of four fungicide treatments (non-treated, chlorothalonil, propiconazole, and iprodione). All fungicide treatments were applied once to turfgrass previously treated with TE or not treated. The presence or absence of dew at the time of fungicide application generally had no influence on fungicide performance with respect to dollar spot control. Based on the results of this study, dew removal before the application of fungicides targeting dollar spot is unnecessary. Applications of TE before fungicides reduced dollar spot severity in some cases, but reductions in symptom expression were limited and did not result in markedly improved dollar spot control.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Golf mower"

1

Mrověc, Jan. "Design samojízdné vřetenové sekačky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232070.

Full text
Abstract:
In this diploma thesis is documented an analysis and an approach of designing a self-propelled mobile reel mower with respect of general assumptions of industrial design. Thesis takes aim on a comparison of technologies of present manufacturers of garden equipment and proper choice and following application of technical solution and shape solution on a new product.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Golf mower"

1

The 2006-2011 World Outlook for Disc-Type Stamped Metal Wheels for Golf Carts and Lawn Mowers. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Parker, Philip M. The 2007-2012 World Outlook for Disc-Type Stamped Metal Wheels for Golf Carts and Lawn Mowers. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Golf mower"

1

Kao, Griffin, Jessica Hong, Michael Perusse, and Weizhen Sheng. "The Second Mover Advantage." In Turning Silicon into Gold, 3–7. Berkeley, CA: Apress, 2020. http://dx.doi.org/10.1007/978-1-4842-5629-9_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vittum, Patricia J. "Turfgrass in the Modern Environment." In Turfgrass Insects of the United States and Canada, 1–12. Cornell University Press, 2020. http://dx.doi.org/10.7591/cornell/9781501747953.003.0001.

Full text
Abstract:
This chapter provides an overview of turfgrasses. Turfgrass typically refers to an individual plant or species and turf refers to a uniform stand of grass or a mixture of grasses mowed at a relatively low height, usually less than 10 cm and serving various ornamental, recreational, and functional uses. Residential lawns, golf courses, athletic fields, cemeteries, parks, and arboretums all benefit from healthy, lush stands of turf. Many grass species used for turf are also found in pasture, field, and forage production associated with the livestock industry. The chapter then details the structure and climatic adaptations of turfgrasses, and identifies the major turfgrasses in the United States and Canada. It also describes dichondra lawns and considers the relationship between drought dormancy and turfgrass insect damage, as well as the economic impact of turgrass culture.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Golf mower"

1

Smith, Aaron D., H. Jacky Chang, and Edward J. Blanchard. "An outdoor high-accuracy local positioning system for an autonomous robotic golf greens mower." In 2012 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2012. http://dx.doi.org/10.1109/icra.2012.6224990.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Golf mower"

1

Golf course worker dies after being pinned under an overturned tee box mower. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, January 2007. http://dx.doi.org/10.26616/nioshsface05mi060.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography