Log in

Relevant bibliographies by topics / Granulated fillers / Journal articles

To see the other types of publications on this topic, follow the link: Granulated fillers.

Journal articles on the topic 'Granulated fillers'

Author: Grafiati

Published: 4 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Granulated fillers.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Grynchenko, Nataliya, Olga Tishchenko, Olga Grynchenko, and Pavel Pyvovarov. "INVESTIGATION OF SAFETY AND QUALITY PARAMETERS OF GRANULATED FILLERS." EUREKA: Life Sciences 2 (March 31, 2020): 29–38. http://dx.doi.org/10.21303/2504-5695.2020.001208.

Full text

Abstract:

Within the conducted studies there were highlighted urgent questions of introducing the management system of quality and safety of food products. Quality and safety parameters that determine the notion of food product quality have been established by analyzing the normative and legislative base. There were studied quality parameters of granulated fillers that are structured systems of the ball-like form with diameter (3…7)·10-3 m and are characterized with a plastic, a bit crumbling consistence. Granules may be used as fillers for milk and sour-milk products, cheeses, ice-cream, dessert produc

APA, Harvard, Vancouver, ISO, and other styles

2

Nataliya, Grynchenko, Tishchenko Olga, Grynchenko Olga, and Pyvovarov Pavlo. "DEVISING THE TECHNOLOGICAL PRINCIPLES FOR MAKING A GRANULATED FILLER OBTAINED THROUGH IONOTROPIC GELATION." Eastern-European Journal of Enterprise Technologies 2, no. 11 (104) (2020): 13–23. https://doi.org/10.15587/1729-4061.2020.200098.

Full text

Abstract:

This paper reports the development of technological principles for making granulated fillers. Our study involved model systems (granules), which has made it possible to determine the conditions for forming alginate-calcium complexes. It has been established that the basic principle for obtaining the granules is the ratio of mannuronic to guluronic residues in the composition of sodium alginate, which should equal χ=0.4...0.6 to implement the process of granulation. It has been proven that the content of G-blocks in the composition of sodium alginate should be within 20...25 %, which,

APA, Harvard, Vancouver, ISO, and other styles

3

Nataliya, Grynchenko, Tishchenko Olga, Grynchenko Olga, and Pyvovarov Pavel. "INVESTIGATION OF SAFETY AND QUALITY PARAMETERS OF GRANULATED FILLERS." EUREKA: Life Sciences 2 (March 31, 2020): 29–38. https://doi.org/10.21303/2504-5695.2020.001208.

Full text

Abstract:

Within the conducted studies there were highlighted urgent questions of introducing the management system of quality and safety of food products. Quality and safety parameters that determine the notion of food product quality have been established by analyzing the normative and legislative base. There were studied quality parameters of granulated fillers that are structured systems of the ball-like form with diameter (3…7)·10<sup>-3</sup> m and are characterized with a plastic, a bit crumbling consistence. Granules may be used as fillers for milk and sour-milk products, chee

APA, Harvard, Vancouver, ISO, and other styles

4

Sooksaen, Pat, and Pakpum Jaiya. "FABRICATION OF GRANULATED FOAM GLASSES FOR LIGHTWEIGHT CONCRETE APPLIED FOR THERMAL AND SOUND INSULATION." Suranaree Journal of Science and Technology 30, no. 2 (2023): 010209. http://dx.doi.org/10.55766/sujst-2023-02-e01606.

Full text

Abstract:

Granulated foam glass aggregates were fabricated and applied as fillers in lightweight concrete. Soda lime silicate based glass was used as the main raw material in the foam glass process. Firing temperatures in the range of 820-850ºC were suitable for the foaming process. Granulation was processed using a rotary granulator and heated to expand in an electric rotary furnace. Foaming at 840ºC showed overall properties suitable for applying as a filler in lightweight concrete fabrication e.g. low density, high porosity, uniform of pore size. Foam glass granules processed at 840ºC were mixed with

APA, Harvard, Vancouver, ISO, and other styles

5

Plugin, Andrii, Artem Iefimenko, Olga Borziak, Edwin Gevorkyan, and Oleksii Pluhin. "Establishing patterns in the influence of micro- and nano-dispersed mineral additives on the water resistance of construction gypsum." Eastern-European Journal of Enterprise Technologies 1, no. 6 (109) (2021): 22–29. http://dx.doi.org/10.15587/1729-4061.2021.224221.

Full text

Abstract:

This paper reports a study into the effect of mineral fillers such as ground granulated blast furnace slag, microsilica, and nano dispersed alumina on the structure formation and water resistance of gypsum. The theoretical models of gypsum stone structure with mineral fillers have been built and described, taking into consideration the sign of the surface charge of gypsum crystals and filler particles. In accordance with the developed models, the fillers enable the formation of a dense structure of gypsum stone as a compositional material with a large number of electro-heterogeneous contacts.

APA, Harvard, Vancouver, ISO, and other styles

6

Andrii, Plugin, Iefimenko Artem, Borziak Olga, Gevorkyan Edwin, and Pluhin Oleksii. "Establishing patterns in the influence of micro- and nano-dispersed mineral additives on the water resistance of construction gypsum." Eastern-European Journal of Enterprise Technologies 1, no. 6(109) (2021): 22–29. https://doi.org/10.15587/1729-4061.2021.224221.

Full text

Abstract:

This paper reports a study into the effect of mineral fillers such as ground granulated blast furnace slag, microsilica, and nano dispersed alumina on the structure formation and water resistance of gypsum. The theoretical models of gypsum stone structure with mineral fillers have been built and described, taking into consideration the sign of the surface charge of gypsum crystals and filler particles. In accordance with the developed models, the fillers enable the formation of a dense structure of gypsum stone as a compositional material with a large number of electro-heterogeneous contacts.

APA, Harvard, Vancouver, ISO, and other styles

7

Firdous, Rafia, Tamino Hirsch, Anton Hähnel, Dietmar Stephan, and Anja Buchwald. "Use of residues as fillers in alkali‐activated binders." ce/papers 6, no. 6 (2023): 325–28. http://dx.doi.org/10.1002/cepa.2968.

Full text

Abstract:

AbstractThe demand for resource saving and recycling of waste materials to achieve a circular economy is increasing. In Europe, nearly all blast furnace slag and fly ash are used as supplementary cementitious material. Furthermore, there is urgent need to reduce the CO2 emissions of building materials industry. Like in OPC‐based concretes, the reduction in the binder content by the use of fillers can be a way to reduce the CO2 emissions of alkali‐activated binders even further. Therefore, this study aims at the use of industrial residues as a filler in alkali‐activated materials to reduce the

APA, Harvard, Vancouver, ISO, and other styles

8

Čechmánek, René, Vladan Prachař, and Jiří Loskot. "Filler from Expanded Glass as a Light-Weighing Component of the Cement Composite with Fiber Reinforcement." Advanced Materials Research 1000 (August 2014): 102–5. http://dx.doi.org/10.4028/www.scientific.net/amr.1000.102.

Full text

Abstract:

Bulk density reduction of the cement composite is possible by the means of using suitable light fillers in a matrix or porous structure creation with an air-entraining agent. Both ways are more or less suitable or effective for proper parameter achievement. From the range of possible fillers with different material properties and influence on rheological parameters during production granulated expanded glass worked the best. By the means of laboratory testing an effect of two fillers based on expanded glass on the fiber reinforced cement composite was verified. Practical applicability was test

APA, Harvard, Vancouver, ISO, and other styles

9

Trufakina, Lyudmila, Elena Berezina, and Alexandra Kuchevskaya. "Influence of Fibrous and Solid Fillers on the Rheological and the Surface Properties of Polymer Composition." Key Engineering Materials 670 (October 2015): 21–26. http://dx.doi.org/10.4028/www.scientific.net/kem.670.21.

Full text

Abstract:

The influence of fibrous and solid granulated fillers on the rheological and surface properties of the polymer compositions on the basis of polyvinyl alcohol and Na-carboxymethyl cellulose is demonstrated. The polymer complexes with Na-carboxymethyl cellulose and sodium tetraborate additions and the compositions filled with polypropylene, polyethylene terephthalate and quartz sand are obtained and comparative assessment of the properties of studied polymer composites have been made. Polymer compositions with quartz sand, synthetic and plant fibrous fillers increase the effective viscosity, ela

APA, Harvard, Vancouver, ISO, and other styles

10

Tebbal, Nadia, Zine El abidine Rahmouni, and Zoubir Djendi. "Effect of fillers Granulated slag on the durability of HPC in marine environment." MATEC Web of Conferences 11 (2014): 01013. http://dx.doi.org/10.1051/matecconf/20141101013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Boukour, Salima, Brahim Lafifi, and Mohamed Larbi Benmalek. "Some Properties of a Cementitious Mortar Containing Granulated Rubber Waste and Brick Fillers: An Experimental Study, Mathematical Modeling and Optimization." Slovak Journal of Civil Engineering 32, no. 2 (2024): 27–37. http://dx.doi.org/10.2478/sjce-2024-0011.

Full text

Abstract:

Abstract The objective of this study is to assess the impact of incorporating rubber tire waste and brick fillers as a substitute for sand in cement mortar samples. The evaluation includes measurements of the bending strength, dynamic modulus of elasticity, and displacement. The replacement of sand by rubber waste (RW) and brick waste (BW) at 0%, 10%, 20% and 30% for rubber waste and 0%, 2.5%, 5.0%, 7.5%, and 10% for brick waste by volume was experimentally conducted. According to the findings, the introduction of rubber waste leads to a significant reduction in the flexural strength, dynamic

APA, Harvard, Vancouver, ISO, and other styles

12

Yuan, Yuan, Weiben Chen, Zhe Ma, et al. "Enhanced optomechanical properties of mechanochemiluminescent poly(methyl acrylate) composites with granulated fluorescent conjugated microporous polymer fillers." Chemical Science 10, no. 7 (2019): 2206–11. http://dx.doi.org/10.1039/c8sc04701d.

Full text

Abstract:

With the combination of mechanochemiluminescence from 1,2-dioxetane coupled polymers and conjugated microporous polymer nanosheets, a new kind of filling-type mechanolumninescent polymer composite was developed.

APA, Harvard, Vancouver, ISO, and other styles

13

Lekoui, Mohamed Tahar, Chiraz Kechkar, Houria Hebhoub, Karima Messaoudi, Hamid Alsayadi, and Mohamed Ichem Benhalilou. "Study of the mechanical properties, durability, and microstructure of an ultra-high-performance fiber-reinforced concrete containing recycled fillers." Materials Science-Poland 42, no. 3 (2024): 1–16. http://dx.doi.org/10.2478/msp-2024-0027.

Full text

Abstract:

Abstract In this article, a specific mix design of the ultrahigh-performance fiber-reinforced concrete (UHPFRC) was proposed and applied for Algerian materials that are currently in use. In the absence of a general mix design that limits their use and reuses waste materials, the present mix design can help reduce the high manufacturing cost of this type of concrete and make it more environmentally friendly. Here, we have looked for a reference mix design based on local ordinary aggregates, and then, we introduced the recycled fillers from ceramic waste and granulated blast furnace slag into ou

APA, Harvard, Vancouver, ISO, and other styles

14

Kalinowska-Wichrowska, Katarzyna, Magdalena Joka Yildiz, Edyta Pawluczuk, et al. "Enhancing the Properties of Cement Composites Using Granulated Hemp Shive Aggregates." Sustainability 16, no. 14 (2024): 6142. http://dx.doi.org/10.3390/su16146142.

Full text

Abstract:

In recent years, civil engineers have been exploring innovative methods of constructing buildings using environmentally friendly materials. The beneficial properties of hemp harl, an agricultural waste that is gaining popularity in construction, prompted the idea of strengthening its properties through the granulation process and using it as an aggregate in cement composites. This work aimed to investigate whether the use of hemp husk in the form of granules would have a positive effect on the properties of cement composites compared to their traditional form (stems). Potato starch was introdu

APA, Harvard, Vancouver, ISO, and other styles

15

Sokov, V. N. "Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 9. Physicotechnical Properties of Porous Corundum Granules and Fillers Based on Them1." Refractories and Industrial Ceramics 59, no. 5 (2019): 488–91. http://dx.doi.org/10.1007/s11148-019-00259-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Oualit, Mehena, Amar Irekti, and Brahim Hami. "Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers." Selected Scientific Papers - Journal of Civil Engineering 17, no. 1 (2022): 1–15. http://dx.doi.org/10.2478/sspjce-2022-0014.

Full text

Abstract:

Abstract The use of superplasticizers in concrete production has become a common practice, especially when a high fluidity is required. On the other hand, the risk of segregation and the stability of these mixtures is ensured by the incorporation of a large volume of fine mineral additions. The present investigation is devoted to the study of the influence of three types of superplasticizers of different chemical compositions, namely: Combined Synthetic Polymers (CSP), Poly-Carboxylate Ether (PCE), and Modified Poly-Carboxylate Ether (MPCE) on the rheological behavior of self-compacting concre

APA, Harvard, Vancouver, ISO, and other styles

17

OYEAGU, UCHENNA, CHARLES NWUCHE, CHRISTIAN OGBONNA, and JAMES OGBONNA. "Amylase Production by Aspergillus niger immobilized in Microporous Calcium Alginate Gel Beads." Romanian Biotechnological Letters 26, no. 4 (2021): 2825–33. http://dx.doi.org/10.25083/rbl/26.4/2825-2833.

Full text

Abstract:

Microporous calcium alginate gel beads were investigated as potential solutions to mass transfer limitations in immobilized cultures. The beads were prepared by gelling mixtures of sodium alginate and fillers (starch or granulated sugars) in calcium chloride solution. The resulting beads were cured in the same solution, during which the fillers leached out of the beads thereby creating micro-pores in the beads (microporous beads). The effectiveness of the microporous beads in improving amylase production by Aspergillus niger LC 269109 was investigated. Spores of A. niger were immobilized in th

APA, Harvard, Vancouver, ISO, and other styles

18

Abdel-Gawwad, Hamdy A., Tamino Hirsch, Raoul Mancke, et al. "Performance, thermodynamic modelling, and global warming potential of low sodium-activated artificial granulated slag substituted with quartz and limestone fillers." Cleaner Engineering and Technology 24 (February 2025): 100861. https://doi.org/10.1016/j.clet.2024.100861.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Liu, Yunpeng, Xihao Yang, Wendi Tian, et al. "Mechanical Properties and Microstructure of Alkali-Activated Cements with Granulated Blast Furnace Slag, Fly Ash and Desert Sand." Buildings 14, no. 11 (2024): 3422. http://dx.doi.org/10.3390/buildings14113422.

Full text

Abstract:

In this study, desert sand was used as supplementary materials in alkali-activated cements (AAC) with granulated blast furnace slag (GBFS) and fly ash (FA). For the first time, a systematic investigation was conducted on the effects of various treatment methods and contents of desert sand on the strength and microstructure of AAC. This study also analyzed the X-ray diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-ray Microanalysis (SEM-EDX), Mercury Intrusion Porosimetry (MIP), pH values, and Fourier-transform infrared spectroscopy (FT-IR) properties of AAC pastes contain

APA, Harvard, Vancouver, ISO, and other styles

20

Ermawati, Dian Eka, Saifullah Sulaiman, and Indah Purwantini. "Optimization Formula of Turmeric (Curcuma longa L.) Extract Chewable with Combination of Mannitol-Lactose as Filler Based on Simplex Lattice Design." JPSCR : Journal of Pharmaceutical Science and Clinical Research 2, no. 01 (2017): 53. http://dx.doi.org/10.20961/jpscr.v2i01.5284.

Full text

Abstract:

<div class="WordSection1"><p>Hydroalcoholic extract of turmeric (<em>Curcuma longa</em> L.) doses of 1.66 mg/kg containing 10% of curcuminoid was recommended as a supplement for prevention of atherosclerosis. This study aimed to formulate hydroalcoholic extract of turmeric into chewable which are more acceptable and practical. Mannitol-Lactose selected as a filler to make the chewable in this study. Optimum composition of filler of the mixture obtained by the <em>Simplex Lattice Design</em> method.</p><p>Identification of turmeric rhizome has bee

APA, Harvard, Vancouver, ISO, and other styles

21

Sadrudinov, M. S., V. M. Mukhin, and V. N. Klushin. "Effect of doping and reinforcing fillers on preparation and molding of raw mixtures in manufacture of coal-based granulated activated carbons." Russian Journal of Applied Chemistry 86, no. 1 (2013): 6–10. http://dx.doi.org/10.1134/s1070427213010023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Ou, Li, Hongzhou Zhu, Ruipu Chen, Chunli Su, and Xiaosi Yang. "Effect of Industrial Solid Waste as Fillers on the Rheology and Surface Free Energy of Asphalt Mastic." Materials 17, no. 5 (2024): 1125. http://dx.doi.org/10.3390/ma17051125.

Full text

Abstract:

The continuous growth of industrial solid waste production has generated many environmental problems. We evaluated the potential of industrial solid waste as a substitute filler in asphalt mastic, with the aim of increasing the use of sustainable road construction materials. In this study, X-ray fluorescence spectroscopy (XRF) and scanning electron microscopy (SEM) were used to characterize the oxide composition and micromorphology of limestone (LS), red mud (RM), steel slag (SS), and ground granulated blast-furnace slag (GGBFS). Four asphalt mastics containing LS, RM, SS, and GGBFS with a fil

APA, Harvard, Vancouver, ISO, and other styles

23

Glukhovskyi, V. V., and I. V. Glukhovskyi. "Low energy compositions based on inorganic binders." Кераміка: наука і життя, no. 4(45) (December 27, 2019): 26–30. http://dx.doi.org/10.26909/csl.4.2019.4.

Full text

Abstract:

The results of scientific research in realization of energy-intensity cellular concrete production technology of normal condition hardening are shown. Physical-mechanical and thermophysical properties of cellular concretes, which are produced by this technology, are relevant to active normative documents. In this case the produced cellular concretes are characterized with strength increasing in time in compare to autoclave hardening cellular concretes and aerated concrete. The influence of the chemical activity of the fillers on the performance of the final product has been established.

APA, Harvard, Vancouver, ISO, and other styles

24

Coppola, Bartolomeo, Jean-Marc Tulliani, Paola Antonaci, and Paola Palmero. "Role of Natural Stone Wastes and Minerals in the Alkali Activation Process: A Review." Materials 13, no. 10 (2020): 2284. http://dx.doi.org/10.3390/ma13102284.

Full text

Abstract:

This review aims to provide a comprehensive assessment concerning alkali activation of natural stone wastes and minerals. In particular, the structure of the review is divided into two main sections in which the works dealing with alumino-silicate and carbonatic stones are discussed, respectively. Alumino-silicate stones are generally composed of quartz and feldspars, while carbonatic stones are mainly made of calcite and dolomite. The role of these minerals in the alkali activation process is discussed, attesting their influence in the development of the final product properties. In most of t

APA, Harvard, Vancouver, ISO, and other styles

25

Golik, Vladimir, Yury Dmitrak, Vitaly Komashchenko, and Nikolay Kachurin. "Management of hardening mixtures properties when stowing mining sites of ore deposits." Journal of Mining Institute 243 (June 13, 2020): 285. http://dx.doi.org/10.31897/pmi.2020.3.285.

Full text

Abstract:

Underground mining is characterized by the weakening of the bearing rock mass strata competence and the accumulation of mineral waste. The full use of subsurface resources is ensured by the use of technologies with filling voids by hardening mixtures, which requires high-quality raw materials to obtain the required strength. The deficit of the binding component can be filled with the use of granulated slags of blast-furnace process, mill tailings, ash-slags and other wastes. Most often, voids are laid by mixtures with a combination of cement and a binding component. Mixtures with ash-slag addi

APA, Harvard, Vancouver, ISO, and other styles

26

Hadj, Mostefa, Benamar Balegh, Hamid Sellaf, and Mohamed Dahamni. "Effects of scrap rubber waste on the mechanical performance of mortar made of crushed sand and sediment." Vojnotehnicki glasnik 73, no. 1 (2025): 236–63. https://doi.org/10.5937/vojtehg73-50150.

Full text

Abstract:

Introduction/purpose: The consumption of natural sand in Algeria is high due to its extensive use in mortar, while sediments and rubber waste pose significant environmental and societal challenges. This study investigates the effects of incorporating rubber waste content in mortars mixed with crushed sand and sediment. The primary goal is to valorize crushed sand particles through physical and mechanical tests, evaluating their potential as an alternative to natural sand in mortar mixtures. Methods: Experimental work was carried out to study the impact of partially and fully replacing sediment

APA, Harvard, Vancouver, ISO, and other styles

27

Kumari, Kareena, Arvind Gupta, Poonam Dwivedi, Harden Dev Gupta, and Dinesh Kumar Mishra. "Utilisation of pozzolanic material in skim-coat product for reduction of carbon footprint." IOP Conference Series: Earth and Environmental Science 1326, no. 1 (2024): 012084. http://dx.doi.org/10.1088/1755-1315/1326/1/012084.

Full text

Abstract:

Abstract Skim coat wall putty is the most broadly used and important product in the coating and construction industry which is a combination of white cement, inorganic minerals fillers and organic additives like Re-dispersible Polymer (RDP), Methyl Cellulose (MC) etc. This novel study investigates a sustainable way to use Supplementary Cementitious Materials (SCM) in skim-coat wall putty products. Industrial waste in cement and cement-based products reduces CO2 emissions. Ground Granulated Blast Furnace (GGBS), a steel industry waste, is highly reactive and forms all desired cementitious phase

APA, Harvard, Vancouver, ISO, and other styles

28

Han, Chao, Hongwu Li, Kun Duan, et al. "Optimization of Technical Parameters for the Vacuum Preloading-Flocculation-Solidification Combined Method for Sustainable Sludge Utilization." Sustainability 17, no. 6 (2025): 2710. https://doi.org/10.3390/su17062710.

Full text

Abstract:

High-water content dredged sludge from waterways, with potential for sustainable use as high-performance fillers, was effectively treated using the vacuum preloading-flocculation-solidification combined method (denoted as the VP-FSCM). This study investigated the effect of flocculant and curing agent dosages on the solidification of sludge with initially poor mechanical properties. Ground granulated blast-furnace slag (GGBS) and ordinary Portland cement (OPC) were selected as composite curing agents, while anionic polyacrylamide (APAM) and slaked lime were used as a mixed flocculant. Laborator

APA, Harvard, Vancouver, ISO, and other styles

29

Dolmatova, O. I., and T. E. Chernysheva. "Healthy milk snack." Proceedings of the Voronezh State University of Engineering Technologies 82, no. 2 (2020): 88–93. http://dx.doi.org/10.20914/2310-1202-2020-2-88-93.

Full text

Abstract:

Cottage cheese and curd products are presented on the Russian dairy market. The latter are most popular with the addition of flavoring fillers, such as fruit and berry, nut and chocolate, and others. Despite the benefits of cottage cheese and curd products, fast food is currently in great demand. Fast food is food that is designed to satisfy hunger in a matter of minutes. It has both its advantages: fast, tasty, cheap enough; and cons: such products are high in calories, addictive, as they contain flavor enhancers, cause and exacerbate diseases of the gastrointestinal tract, etc. We offer an a

APA, Harvard, Vancouver, ISO, and other styles

30

Simeonova, A., A. Petkov, N. Delchev, and J. Balgaranova. "Investigation of possibilities for high heavy metal content sludges utilization by incorporating them in concrete products." Journal of Mining and Metallurgy, Section B: Metallurgy 42, no. 1 (2006): 25–31. http://dx.doi.org/10.2298/jmmb0601025s.

Full text

Abstract:

The safe removal of sludge, obtained during the surface treatment of different metal products, is a serious environmental problem. These sludges are usually characterized by a high content of heavy metals (Pb, Cu, Ni, Zn, Cr, Cd, Mn), low quality and are obtained in many small industrial units in the whole country, which makes their centralized treatment difficult. In world practice, different methods are used for component fixation of such sludge, in the aim to prevent leaching of the metals causing pollution of the soil and underground water. The aim of the recent work is to prepare the slud

APA, Harvard, Vancouver, ISO, and other styles

31

Ghosh, Rounak, Christian Mani, Roland Krafczyk, et al. "Exploring the Impact of Reinforcing Filler Systems on Devulcanizate Composites." Polymers 16, no. 11 (2024): 1448. http://dx.doi.org/10.3390/polym16111448.

Full text

Abstract:

Composites revolutionize material performance, fostering innovation and efficiency in diverse sectors. Elastomer-based polymeric composites are crucial for applications requiring superior mechanical strength and durability. Widely applied in automotives, aerospace, construction, and consumer goods, they excel under extreme conditions. Composites based on recycled rubber, fortified with reinforcing fillers, represent a sustainable material innovation by repurposing discarded rubber. The integration of reinforcing agents enhances the strength and resilience of this composite, and the recycled po

APA, Harvard, Vancouver, ISO, and other styles

32

Mar’yushkina, V. S., O. N. Abrosimova, E. V. Kuvaeva, and Yu M. Ladutko. "Development of a granulate based on amidines with anti-inflammatory activity." JOURNAL of SIBERIAN MEDICAL SCIENCES 6, no. 2 (2022): 28–41. http://dx.doi.org/10.31549/2542-1174-2022-6-2-28-41.

Full text

Abstract:

Introduction. Amidines have a fairly high biological activity. One aspect of their therapeutic action is the anti-inflammatory effect. Therefore, the development of a granulate technology based on amidines with anti-inflammatory activity for subsequent dosing into enteric capsules is an issue of interest today. Aim. To develop a granulate based on amidines with anti-inflammatory activity for subsequent dosing into enteric capsules. Materials and methods. An experimentally synthesized substance N-(naphthalene-2-yl)benzene carboximid¬amide and excipients: lactose monohydrate, sodium starch glyco

APA, Harvard, Vancouver, ISO, and other styles

33

Sokov, V. N. "Highly Porous Granulated Corundum Filler of Alumina-Foam Polystyrene Mixture. Part 6. Optimization of Plate Granulator Operating Regime." Refractories and Industrial Ceramics 59, no. 2 (2018): 144–50. http://dx.doi.org/10.1007/s11148-018-0196-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Vácha, Jan. "Influence of Carbon Nanotubes on the Mechanical Properties and Morphology of the Thermoplastic Polymer Matrix of the Polyamide 6." Key Engineering Materials 606 (March 2014): 221–24. http://dx.doi.org/10.4028/www.scientific.net/kem.606.221.

Full text

Abstract:

This paper examines mechanical properties of composites with thermoplastic polymer matrix and carbon nanotubes. Polyamide 6 was used as a basic matrix, to which nanoparticles in the form of nanotubes were added in a described proportion to the weight. Granulate was prepared by cold granulation in the worm extruder. Dried granulate was injected into the Arburg injection molding machine. Mechanical properties were evaluated by tensile and hardness test. These results were then compared with results achieved by polyamide 6 to which no fillers were added. Discussion analyses what is the influence

APA, Harvard, Vancouver, ISO, and other styles

35

Pavlíková, Milena, Adam Pivák, Martina Záleská, Ondřej Jankovský, Pavel Reiterman, and Zbyšek Pavlík. "Magnesium Oxychloride Cement Composites Lightened with Granulated Scrap Tires and Expanded Glass." Materials 13, no. 21 (2020): 4828. http://dx.doi.org/10.3390/ma13214828.

Full text

Abstract:

In this paper, light burned magnesia dispersed in the magnesium chloride solution was used for the manufacturing of magnesium oxychloride cement-based composites which were lightened by granulated scrap tires and expanded glass. In a reference composite, silica sand was used only as filler. In the lightened materials, granulated shredded tires were used as 100%, 90%, 80%, and 70% silica sand volumetric replacement. The rest was compensated by the addition of expanded glass granules. The filling materials were characterized by particle size distribution, specific density, dry powder density, an

APA, Harvard, Vancouver, ISO, and other styles

36

Золотин, А. Ю., С. В. Симоненко, О. В. Кудряшова, and Е. С. Симоненко. "Development of products based on goat's milk: organoleptic evaluation of experimental samples." Food processing industry, no. 10 (October 4, 2023): 66–70. http://dx.doi.org/10.52653/ppi.2023.10.10.014.

Full text

Abstract:

В статье изложены результаты органолептической оценки экспериментальных образцов, разрабатываемых продуктов на основе козьего молока для детского питания: напитка, киселя, пастообразного и взбитого продуктов. Актуальность разработки продуктов обусловлена несоответствием уровня ассортиментного разнообразия продуктов наметившейся тенденции увеличения поголовья коз. Экспериментальные образцы продуктов, представленные к органолептическим испытаниям, вырабатывались по различным рецептурам. Общим для всех рецептур являлась сырьевая основа – козье молоко и включение пищевых волокон (камеди акации). Э

APA, Harvard, Vancouver, ISO, and other styles

37

van Hoek, Johannes, Geert Heideman, Jacques Noordermeer, Wilma Dierkes, and Anke Blume. "Implications of the Use of Silica as Active Filler in Passenger Car Tire Compounds on Their Recycling Options." Materials 12, no. 5 (2019): 725. http://dx.doi.org/10.3390/ma12050725.

Full text

Abstract:

Tires are an important vehicle component, as car handling, safety and fuel economy depend for a major part on the tire composition and construction. As a consequence, tires are improved continuously. The most prominent improvement in the recent past was the use of a silica-silane filler system in passenger car tread compounds, instead of traditionally used carbon black. For recycling and re-use of end-of-life car tire rubber one of the most promising recycling methods is devulcanization: re-plasticizing the vulcanized rubber by selectively breaking the sulfur bridges between the polymer molecu

APA, Harvard, Vancouver, ISO, and other styles

38

Shcherbyna, R. O., O. V. Khromylova, H. R. Nimenko, and V. O. Salionov. "Development of the optimal composition of tablets with the active substance potassium 2-((4-amino-5-(morpholinomethyl)-4H-1,2,4-triazol-3-yl)thio)acetate. Message 1. Study of the effect of auxiliary substances on bulk density, bulk density after shrinkage, fluidity and angle of natural slope of powder masses." Current issues in pharmacy and medicine: science and practice 17, no. 2 (2024): 144–49. http://dx.doi.org/10.14739/2409-2932.2024.2.300704.

Full text

Abstract:

The pharmaceutical industry continually evolves to meet the demands of modern society for high-quality medications. One avenue of this advancement involves exploring new technologies for manufacturing tablet formulations that adhere to contemporary quality standards. An integral aspect of this process is the careful selection of optimal excipients that preserve the pharmacological activity of the active substance to the greatest extent possible. Investigating the impact of various excipients on the tablet compression process is pivotal to addressing this challenge. Therefore, the study of the

APA, Harvard, Vancouver, ISO, and other styles

39

Deboucha, Walid, Nassim Sebaibi, Yassine El Mendili, et al. "Reactivity Effect of Calcium Carbonate on the Formation of Carboaluminate Phases in Ground Granulated Blast Furnace Slag Blended Cements." Sustainability 13, no. 11 (2021): 6504. http://dx.doi.org/10.3390/su13116504.

Full text

Abstract:

The reactivity effect of calcium carbonate, present in ground oyster shells and limestone filler, on the formation of carboaluminate phases in ground granulated blast furnace slag blended cement pastes was reported in this paper. Six different binary and ternary blended cement pastes were prepared using ground granulated blast furnace slag, ground oyster shells and limestone filler with different replacement levels (from 5 to 35%). The carboaluminate formation was assessed and quantified directly using X-ray diffraction (XRD), and indirectly by following the aluminate phase’s reaction (heat fl

APA, Harvard, Vancouver, ISO, and other styles

40

Khapaev, V. M., and V. I. Istomin. "Separation of crude oil emulsions in settlers with granulated filler." Chemistry and Technology of Fuels and Oils 22, no. 3 (1986): 122–23. http://dx.doi.org/10.1007/bf00726129.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Mancel, Vladimír, Iveta Čabalová, Jozef Krilek, et al. "Utilization of Waste Rubber Materials After the End of Their Life Cycle in the Production of Three-Layer Particleboards—Physical and Mechanical Properties." Polymers 17, no. 7 (2025): 998. https://doi.org/10.3390/polym17070998.

Full text

Abstract:

The aim of the article was to test new types of rubber-containing particleboards created from waste materials, which positively contributes to environmental protection, saving primary resources and reducing production costs. This article focuses on the study of three-layer particleboards made from wood particles (spruce non-treated beams) and waste rubber granulates (tires, mixture of seals and carpets, internal flammable cables, external non-flammable cables). Urea–formaldehyde glue, melamine–formaldehyde glue, paraffin emulsion, and ammonium nitrate were used as a binders and excipients in t

APA, Harvard, Vancouver, ISO, and other styles

42

Müller, M., J. Žarnovský, and R. Drlička. "Recycling of Polyamide from Scrap Tyres as Polymeric Composites." Research in Agricultural Engineering 61, Special Issue (2016): S79—S83. http://dx.doi.org/10.17221/51/2015-rae.

Full text

Abstract:

Rubber granulate, metal waste and textile waste (polyamide fibres) come into the mechanical process of waste tyres recycling. The pollution and degradation processes are problematic in using of secondary raw material. The matrix was in the form of three various adhesives in testing &ndash; two-component epoxy adhesives and a polyester adhesive. The filler was in the form of textile waste (polyamide fibres) from the process of tyres recycling containing approximately 10&ndash;12% of rubber granulate. The filler was added in app. 15% of weight ratio into the matrix. The aim of the resear

APA, Harvard, Vancouver, ISO, and other styles

43

M. I. Netesa and D. V. Palanchuk. "Lightweight concretes on the granulated slag basis of the Petrovsky plant." Science and Transport Progress, no. 35 (December 25, 2010): 156–61. http://dx.doi.org/10.15802/stp2010/8876.

Full text

Abstract:

The research results of influence of compositions of concretes on tensile strength at compression, in which the slag from the Steel Plant named after Рetrovskiy was used as a basic component and the ash from the Prydniprovs’ka Heat Power Station as filler, are represented.

APA, Harvard, Vancouver, ISO, and other styles

44

Politaeva, Natalia A., Vladimir V. Slugin, Elena A. Taranovskaya, Ivan N. Alferov, Maksim A. Soloviev, and Andrei M. Zakharevich. "GRANULATED SORPTION MATERIALS FOR WASTE WATERS PURUFUCATION FROM ZINK IONS (Zn2+)." IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA 60, no. 7 (2017): 85. http://dx.doi.org/10.6060/tcct.2017607.5575.

Full text

Abstract:

The article describes the main applications of biopolymer – chitosan, the most important of which are medicine and food industry. In recent times, many works devoted to the application of chitosan for wastewater treatment because it has a flocculation and sorption properties. The market price of chitosan is high, so it is proposed to create a granular composite sorption materials based on chitosan and waste of agricultural processing, which will reduce the cost and improve the sorption properties. As waste agricultural processing is proposed to use heat-treated threshing of millet which has hi

APA, Harvard, Vancouver, ISO, and other styles

45

Pichór, Waldemar, Adrian Kamiński, Paulina Szołdra, and Maksymilian Frąc. "Lightweight Cement Mortars with Granulated Foam Glass and Waste Perlite Addition." Advances in Civil Engineering 2019 (February 17, 2019): 1–9. http://dx.doi.org/10.1155/2019/1705490.

Full text

Abstract:

This article presents the influence of granulated foam glass (GFG) on thermal insulation and mechanical properties of lightweight cement mortars. The mortars were additionally modified with addition of ground perlite dust. Ground expanded perlite waste was introduced into the cement matrix in the amounts of 10%, 20%, and 30% of cement mass. The results show that application of this waste increases the strength of the mortars as well as decreases their thermal conductivity coefficient. A series of mortars were prepared with introduction of granulated foam glass with mass per unit filler/cement

APA, Harvard, Vancouver, ISO, and other styles

46

Shoshmina, O. V., S. N. Gureyeva, and L. V. Vronska. "Study on the influence of excipients on pharmaco-technological properties of tablet cores of dexketoprofen." Farmatsevtychnyi zhurnal, no. 1 (March 18, 2019): 53–63. http://dx.doi.org/10.32352/0367-3057.1.19.05.

Full text

Abstract:

Among the group of nonsteroidal anti-inflammatory drugs, the active substance dexketoprofen trometamol is released. Its pharmacological and pharmacological and technological characteristics are induced in the article. The feasibility of using the wet granulation method in the development of tablets with dexketoprofen is substantiated. The purpose of this work was selecting the optimal excipients for obtaining a high-quality medicinal product. The excipients were selected and grouped into 4 functional groups. For the planning of the experiment, a matrix was based on the hyper-Greek-

APA, Harvard, Vancouver, ISO, and other styles

47

D. Huseyn Mammadov, Ph, and Musa Gadirov. "Application of Slags from Thermal Power Station as an Effective Initial Material in the Production of Artificial Porous Filler." International Journal of Engineering & Technology 7, no. 3.14 (2018): 461. http://dx.doi.org/10.14419/ijet.v7i3.14.17043.

Full text

Abstract:

The article is devoted to obtaining an artificial porous filler from industrial wastes, in particular from granulated slags, or ash-slag mixtures from Thermal Power Station. The developed technology provides the opportunity to expand the raw material base of artificial porous filler production for lightweight concrete, and it allows us to solve the problem of involving secondary resources in the production of construction materials and protection of the environment from pollution.According to the results of research, the intervals of the bloating temperature have been determined, the technolog

APA, Harvard, Vancouver, ISO, and other styles

48

Achour, Taoufik, André Lecomte, Mongi Ben Ouezdou, Rachid Mensi, and Imène Joudi. "Contribution des fillers calcaires à l’adhérence pâte-granulat. Exemples tunisiens." Materials and Structures 41, no. 5 (2007): 815–30. http://dx.doi.org/10.1617/s11527-007-9287-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Ahsan, Qumrul, Chia Pooi Ching, and Mohd Yuhazri bin Yaakob. "Physical and Sound Absorption Properties of Spent Tea Leaf Fiber Filled Polyurethane Foam Composite." Applied Mechanics and Materials 660 (October 2014): 541–46. http://dx.doi.org/10.4028/www.scientific.net/amm.660.541.

Full text

Abstract:

Spent tea leaves (STL) from tea producing factories can be considered as new resources for sound absorbing polyurethane (PU) matrix composite materials because STL are rich in polyphenols (tannins) which cause high durability, high resistance to fungal and termites, and high resistance to fire. The research aims to study the physical characteristics of STL and the effect of dispersion morphology of STL on the sound absorption properties of polyurethane foam composites by varying filler loading. Three grades of STL fibers either as received or granulated are used in this study, namely BM-FAE an

APA, Harvard, Vancouver, ISO, and other styles

50

Chegenizadeh, Amin, Scott W. Hanson, Hamid Nikraz, and Calvin Scott Kress. "Effects of Ground-Granulated Blast-Furnace Slag Used as Filler in Dense Graded Asphalt." Applied Sciences 12, no. 6 (2022): 2769. http://dx.doi.org/10.3390/app12062769.

Full text

Abstract:

Industrial waste materials are increasingly being used in asphalt to improve pavement quality and reduce environmental impacts. The aim of this research was to test the pavement distress-related effects of using ground-granulated blast-furnace slag (GGBFS) as a filler in hot mix asphalt. There is potential for GGBFS to be integrated into Western Australian (WA) asphalt pavements. GGBFS was used as a replacement for the conventional hydrated lime (HL) filler used in mix designs of the Main Roads WA specifications. A control mixture (1.5% HL) was compared with three prototype mixtures containing

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!