Log in

Relevant bibliographies by topics / Grinding device

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Grinding device'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Grinding device.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Grinding device"

1

Hsieh, Long-Chang, and Tzu-Hsia Chen. "THE SYSTEMATIC DESIGN OF PLANETARY-TYPE GRINDING DEVICES FOR OPTICAL FIBER FERRULES AND WAFERS." Transactions of the Canadian Society for Mechanical Engineering 40, no. 4 (2016): 619–30. http://dx.doi.org/10.1139/tcsme-2016-0049.

Full text

Abstract:

The traditional planetary grinding device can only polish one optical fiber ferrule. The other grinding device with donut polishing trace is also proposed for polishing wafer. This grinding device has a problem, that is, “the polishing qualities of different points on the wafer are not the same”. Hence, this paper proposes a new planetary grinding device for polishing more optical fiber ferrules and more wafers. Based on the kinematics of planetary gear train, the equations of polishing trace and velocity are derived. Then, the velocity deviation percentage (Vdp) is calculated, which is an imp

APA, Harvard, Vancouver, ISO, and other styles

2

Zhu, Lin, and Yi Geng. "The Design of Gun-Drill Sharpening Device." Applied Mechanics and Materials 618 (August 2014): 439–42. http://dx.doi.org/10.4028/www.scientific.net/amm.618.439.

Full text

Abstract:

With the advancement of science and technology, the precision of processing mechanical parts is increasingly high demand, the increasing number of small diameter deep hole parts, which puts forward higher requirements of deep hole processing equipment and Gun-Drill sharpening devices. The gun drill needed to be repeatedly regrinding, hand grinding method cannot guarantee the optimum tool geometry, so special grinding devices are necessities. This paper designed a fast Gun-Drill sharpening device, the grinding accuracy and efficiency were improved, and the device has been applied in actual prod

APA, Harvard, Vancouver, ISO, and other styles

3

Uminsky, S., L. Knaub, A. Moskalyuk, and S. Zhitkov. "CUTTING DEVICE." Аграрний вісник Причорномор'я, no. 112 (October 8, 2024): 90–93. https://doi.org/10.37000/abbsl.2024.112.16.

Full text

Abstract:

When justifying the principle of operation and operating conditions of the crushing device, it is necessary to take into account the mutual influence of many structural, kinematic and loading parameters, taking into account the physical and mechanical properties of the processed material. The selection of the construction of the working bodies of the crushing device should take into account the linear dimensions of the rods, their configuration and strength under various types of deformations, which will allow, with justified kinematic and technological parameters of the machine, to grind the

APA, Harvard, Vancouver, ISO, and other styles

4

Li, Tie Cheng, Cai Xia Ren, Zong Cai Wang, Chao Qiu, and Wen Ping He. "Design and Study of Lapping Device in Large Caliber Spherical Surface Valve Core." Advanced Materials Research 129-131 (August 2010): 1142–46. http://dx.doi.org/10.4028/www.scientific.net/amr.129-131.1142.

Full text

Abstract:

A special grinding device is designed to solve the problems of the shape precision, surface quality and grinding efficiency. The device is based on the sine generator and triaxial speed to achieve the ideal Grinding trajectory. The accuracy of grinding in spherical valve core & surface quality is assured and improved by three-dimensional elastic support, pressurized floating contact and auto centering device in core and lapping tools. The grinding efficiency is highly enhanced by using the lateral and vertical speeding workpiece installration and the automatic control. The device is worth

APA, Harvard, Vancouver, ISO, and other styles

5

Liao, Ying Hua, Yong Wang, and Liang Dong Zhang. "Study on Inner Cooling Grinding in a General Surface Grinding Machine." Applied Mechanics and Materials 496-500 (January 2014): 1189–92. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.1189.

Full text

Abstract:

According to inner cooling surface grinding mechanism, a device for inner cooling surface grinding in a general surface grinding machine M7130 is developed. And the device includes there parts, i.e. grinding wheel with radial holes, grinding carriage and cutting fluid system. When grinding, cutting fluid provided by the cutting fluid system is directly sprayed into the grinding zones through the radial holes of the grinding wheel under the action of centrifugal force, and the closure of the grinding zones is destroyed. So the cooling effect of cutting fluid is improved and the grinding tempera

APA, Harvard, Vancouver, ISO, and other styles

6

Onishi, Takashi, Moriaki Sakakura, Naoki Sato, Takuya Kodani, Kazuhito Ohashi, and Shinya Tsukamoto. "Grinding System Reducing the Influence of Thermal Deformation of Workpiece in Cylindrical Grinding." Advanced Materials Research 797 (September 2013): 609–12. http://dx.doi.org/10.4028/www.scientific.net/amr.797.609.

Full text

Abstract:

In cylindrical grinding, a sizing device is generally used to obtain the required dimension. However, the dimensional error can be caused by the thermal deformation of the workpiece even if grinding machine is controlled with the sizing device. To solve this problem, it is necessary to develop the grinding system that can consider the thermal deformation of the workpiece during grinding process. In this study, an advanced grinding system was developed, which can predict the net stock removal of ground workpiece immediately. The grinding experiment is carried out to verify the developed system.

APA, Harvard, Vancouver, ISO, and other styles

7

Göttsching, Tim, Andi Wippermann, and Thilo Grove. "Quick Stop Device to Analyze the Chip Formation Mechanisms in Face Grinding." Advanced Materials Research 1140 (August 2016): 221–27. http://dx.doi.org/10.4028/www.scientific.net/amr.1140.221.

Full text

Abstract:

The chip formation mechanisms during grinding are not yet fully understood. The abrupt interruption of the grinding process with a quick stop device is a suitable method to analyze the chip formation mechanisms during grinding. However, there is no device available that enables a reproducible interruption at cutting speeds above vc = 5 m/s. Therefore a new method for the interruption of face grinding processes in order to analyze the chip formation mechanisms is presented in this paper. A quick stop device is designed and constructed based on the advantages and disadvantages of former approach

APA, Harvard, Vancouver, ISO, and other styles

8

Kacalak, Wojciech, Dariusz Lipiński, Filip Szafraniec, and Błażej Bałasz. "A Method and Device for Automated Grinding of Small Ceramic Elements." Materials 14, no. 24 (2021): 7904. http://dx.doi.org/10.3390/ma14247904.

Full text

Abstract:

The paper describes an automated method for grinding small ceramic elements using a hyperboloid wheel. The problem of automating the process of machining elements made of nonmagnetic materials with a small area and low height has been solved. Automation of the grinding process was possible thanks to automatic clamping of workpieces in the machining zone and sequential processing by a specified number of grinding wheels. The workpieces were passed through successive machining zones. The division of the allowance of individual grinding wheels was made taking into account the characteristics of t

APA, Harvard, Vancouver, ISO, and other styles

9

Guo, Shi Qing, Li Quan Wang, Shao Ming Yao, and Min Liu. "Research on FBE Grinding Device of Deepwater Multifunctional Pipeline Repair Machinery." Key Engineering Materials 693 (May 2016): 385–94. http://dx.doi.org/10.4028/www.scientific.net/kem.693.385.

Full text

Abstract:

Deepwater pipeline repairing machine (DPRM) is an appropriative equipment which is used to repair damaged deepwater oil and gas pipelines. With the development of deepwater oil and gas exploitation, inventions of such kinds of equipments are urgent priorities. Grinding technology is used in DPRM to remove pipeline anticorrosive coating. It is easy to cut the pipeline excessively when grinding pipeline anticorrosive coating for large orality of deepwater pipelines, which is not conducive to use mechanical connector to seal the pipeline. In order to settle this problem, the rotating compliant me

APA, Harvard, Vancouver, ISO, and other styles

10

Hou, Hong Ling, Yong Qiang Zhao, and Yu Hai Peng. "Study of Grinding Method of Twist Drills." Advanced Materials Research 97-101 (March 2010): 1902–5. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1902.

Full text

Abstract:

Twist drill is one of the typical cutting tools, usually used inner conical grinding method to trim and dress .it is presented a method of sharpening twist drills in exterior cone surface grinding wheel. A novel sharpening device of linkage-gear compound mechanism is designed. This device can overcome some limitations that can not grind small-diameter drills in the interior cone surface, hence improves the grinding range and grinding quality.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Grinding device"

1

Акілов, Олександр Іванович, Александр Иванович Акилов та Oleksandr Ivanovych Akilov. "Исследование динамических свойств шлифовального устройства". Thesis, Изд-во СумГУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/5467.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Коротун, Микола Миколайович, Николай Николаевич Коротун, Mykola Mykolaiovych Korotun, Я. В. Сорока, and Y. V. Soroka. "Measuring and control devices grinding machine." Thesis, Вид-во СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/5580.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ma, Lei. "PVDF sensor based wireless monitoring of milling process." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/47714.

Full text

Abstract:

Analytical force and dynamic models for material removal processes such as end and face milling do not account for material and process related uncertainties such as tool wear, tool breakage and material inhomogeneity. Optimization of material removal processes thus requires not only optimal process planning using analytical models but also on-line monitoring of the process so that adjustments, if needed, can be initiated to maximize the productivity or to avoid damaging expensive parts. In this thesis, a Polyvinylidene Fluoride (PVDF) sensor based process monitoring method that is independent

APA, Harvard, Vancouver, ISO, and other styles

4

Kundrát, Vladimír. "Návrh nové technologie výroby tvarové hřídele "Hohlwelle"." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228841.

Full text

Abstract:

Diplomová práca je zameraná na riešenie aktuálneho a akutného problému výroby tvarovej hriadele “Hohlwelle” vo firme Vekastool. Tri návrhy riešenia boli sústredené na dokončovaciu operáciu diery 30 H7, z ktorých dva boli priamo odtestované vo firme. Jedna z nich bola návrh a realizácia nového vyvrtávacieho nástroja firmou Ham-Final , ktorá priniesla zníženie nákladov o dve tretiny.

APA, Harvard, Vancouver, ISO, and other styles

5

Labotski, Alexeii Ucamel. "Developmental studies on a portable grinding device for machine tools." Thesis, 2012. http://hdl.handle.net/10210/4502.

Full text

Abstract:

M.Ing.<br>A large number of machine tools in use today are worn and can not produce the correct tolerances as a result of the inaccuracy of the structure. A device was developed to assist in the solution to the problem. The study of the development of this device includes several different fields. An entire prototype scale model of a grinding device is developed, with components including a control system and a developed sensor. The control system consists of circuitry and programming. The programming has been done in Visual Basic. The circuitry includes driver circuits for DC motors as well a

APA, Harvard, Vancouver, ISO, and other styles

6

Chen, Wei-Liang, and 陳威良. "Study On The Tooth Surface Topology Error Of Gear Grinding Worm Due To Assembly Error Of Dressing Device On The Continuous Generating Gear Grinder." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/21531251463119485428.

Full text

Abstract:

碩士<br>國立中正大學<br>機械工程系研究所<br>104<br>In modern industrial development, people also more and more attach this field of precision mechanical. Moreover, the gear grinding machine is no exception. Its advantages are grinding processing with high-precision and easily using tooth surface modification. Because generating gear grinding with grinding worm which is high efficiency by continuous indexing generating, it becomes extremely important in the market of high efficiency and high precision when enhance the machine tool precision. This content is about the accuracy of tooth and higher precision und

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Grinding device"

1

International Symposium on Chemical Mechanical Planarization (2nd 1998 San Diego, Calif.). Proceedings of the Second International Symposium on Chemical Mechanical Planariarization [sic] in Integrated Circuit Device Manufacturing. Edited by Raghavan S, Opila Robert Leon 1953-, Zhang L, Electrochemical Society Electronics Division, Electrochemical Society. Dielectric Science and Technology Division., and Electrochemical Society Meeting. Electrochemical Society, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

International Workshop on Extreme Optics and Sensors (2003 Tokyo, Japan). International progress on advanced optics and sensors: Proceedings of [the] International Workshop on Extreme Optics and Sensors held on 14-17 January, 2003, Tokyo, Japan. Universal Academy Press, Inc., 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

W, Fynn G. Cutting and polishing optical and electronic materials. 2nd ed. A. Hilger, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

W, Fynn G. Cutting and polishing optical and electronic materials. 2nd ed. Hilger, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Opila, R. L. Chemical Mechanical Planarization in Ic Device Manufacturing (Proceedings / Electrochemical Society). Electrochemical Society, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

I. Ali, Y. A. Arimoto, Y. Homma, C. Reidsema-Simpson, K. B. Sundaram R. L. Opila. Chemical Mechanical Planarization in IC Device Manufaturing III: Proceedings Of the International Symposium (Proceedings Volume 99-37). The Electrochemical Society, Inc., 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Grinding Deviance Wikipedia! Blurb, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Advances in CMP/polishing technologies for the manufacture of electronic devices. Elsevier, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Accinno, Michael. Disabled Union Veterans and the Performance of Martial Begging. Edited by Blake Howe, Stephanie Jensen-Moulton, Neil Lerner, and Joseph Straus. Oxford University Press, 2016. http://dx.doi.org/10.1093/oxfordhb/9780199331444.013.20.

Full text

Abstract:

This essay discusses the phenomenon of disabled Union veterans who turned to the profession of organ grinding during and after the American Civil War: they became mendicant musicians who played music in the streets to beg for money. Within a cultural logic that emphasized the sorting of worthy from unworthy poor—and “true” veterans from “imposters”—the related practices of street music and mendicancy were harshly stigmatized. Although artistic and literary representations of disabled organ grinders often used the performers as rhetorical devices to elicit fear, loathing, or pity, closer scruti

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Grinding device"

1

Wen duo, Jia, Jiang Zi feng, and Dai Yu. "Constant Force Control Method of Grinding Device." In Intelligent Robotics and Applications. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-13835-5_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lv, Ming, Lin Ma, Guo Xing Liang, and Yu Zhang. "Research on Design and Manufacture of Ultrasonic-Vibration-Based Gear-Honing Device." In Advances in Grinding and Abrasive Technology XIV. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.436.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Conrad, Reinhard, Rudi Jonck, Werner Theiner, and Bernd Reimringer. "ND Determination of Grinding Defects Using the 3MA Prototype Device." In Nondestructive Characterization of Materials II. Springer US, 1987. http://dx.doi.org/10.1007/978-1-4684-5338-6_51.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Suzuki, Kiyoshi, Shoji Mishiro, Yoshiaki Shishido, Manabu Iwai, Wang Mei, and Tetsutaro Uematsu. "A Micro Ultrasonic Grinding Device with Very High Frequency and its Application." In Advances in Abrasive Technology IX. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-416-2.45.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Quoc Nguyen, Hung, Phong Nguyen Tran, Thai Minh Do, Viet Ngoc Tran, Toan Nguyen Anh Tran, and Toi Van Vo. "A Novel Device for Simultaneously Grinding Multiple Tissue Samples Without Cross-Contamination." In IFMBE Proceedings. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-44630-6_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Pang, Fei, and Wei Wang. "Surface Integrity Analysis of Diamond Device Based on Multi-grit Grinding Simulation." In Proceedings of the Eighth Asia International Symposium on Mechatronics. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1309-9_82.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Yan, Qiu Sheng, Ling Ye Kong, N. Q. Wu, Shao Bo Chen, Zi Qiang Zhang, and Zhi Dan Zheng. "Development of New Device for Form-Grinding and Research on the Profile-Accuracy." In Advances in Abrasive Technology VIII. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-974-1.3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Moruzzi J.J. and Morgan M.N. "Software Integration of Process Monitoring Equipment in Grinding Controller Design." In Advances in Transdisciplinary Engineering. IOS Press, 2017. https://doi.org/10.3233/978-1-61499-792-4-102.

Full text

Abstract:

In grinding it is often desirable to have a control system that can utilise auxiliary Process Control and Monitoring equipment to perform optimised production cycles either using manual (operator) or automatic (CNC) intervention. Implemented functions include wheel balancing, in-process gauging, and touch detection (via acoustic emission and wheel power monitoring). These units can be separate and from different manufacturers, or an integrated subsystem from a single supplier. For optimised machining (including Adaptive Control) the monitoring equipment should be tightly linked to the machine

APA, Harvard, Vancouver, ISO, and other styles

9

Dvořák Karel, Fridrichová Marcela, and Dobrovolný Petr. "Influence of different grinding types on granulometry of recycled glass." In Construction Materials and Structures. IOS Press, 2014. https://doi.org/10.3233/978-1-61499-466-4-305.

Full text

Abstract:

This paper is dedicated to reducing CO2 emissions by using the production of Portland cement with admixtures II species. It explores the possibility of using recycled glass as hydraulically active substance dependent on pozzolanity on progress and specific surface grinding. Recycled glass prepared in standart grinding device, for example ball or vibration mill, does not reach required qualities to participate in high rate of hydrating reaction of cement. Disadvantage of glass grain is their sharp-edge morphology. After grinding, they create conglomeration, which despite a large specific surfac

APA, Harvard, Vancouver, ISO, and other styles

10

"MQL Micro-Grinding Device and Empowerment Process for Biomedical Materials." In Advances in Chemical and Materials Engineering. IGI Global, 2024. https://doi.org/10.4018/979-8-3693-5703-3.ch007.

Full text

Abstract:

With the improvement of people's living standards and the increasing expectations of patients for advanced surgical levels, the requirements for surgery have changed from treatment-oriented to rehabilitation-oriented. Rehabilitation-oriented surgery is characterised by low damage and fast healing, in addition to the clinical experience of the surgeon, the performance of the surgical instrument is also crucial, as the saying goes, “To do a good job, one must first make good use of his or her tools”, in clinical bone surgery, in addition to the surgeon's and processor's experience in operation,

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Grinding device"

1

Ju, Jianzhong, Hongquan Li, Zhili Long, Heng Zhao, Tianyu Peng, and Yuxiang Li. "Research on Ultrasonic Grinding System with Large Size, Width-Thickness Wheel: Design, Optimization and Experiment." In 2024 18th Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA). IEEE, 2024. https://doi.org/10.1109/spawda63926.2024.10878923.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hasan, Ahmed, and Scott Silverman. "Development of Novel Methods for Grinding and Polishing of 3DHI Devices." In ISTFA 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.istfa2024p0342.

Full text

Abstract:

Abstract Novel sample preparation techniques have been developed for Three-Dimensional Heterogeneously Integrated (3DHI) devices to enable precise failure analysis while protecting adjacent components. Traditional grinding and polishing methods risk damaging surrounding areas when tool bits extend beyond the target region. Using the VarioMill system's high-precision stages (±1µm accuracy), we introduce three key innovations: a helical grinding approach for accessing die centers, an extended tool bit technique for processing rectangular corners, and enhanced polishing protocols. These methods a

APA, Harvard, Vancouver, ISO, and other styles

3

Pribulova, Alena, Peter Futas, Patrik Fedorko, Maria Mihalikova, and Maria Mihalikova. "THE EFFECT OF THE AMOUNT OF BINDER ON THE PROPERTIES OF BRIQUETTES PREPARED FROM FOUNDRY DUST." In 24th SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/4.1/s18.41.

Full text

Abstract:

Briquetting is the pressing of dusty materials into pieces of the same shape and size. Briquetting can be done without a binder or with the addition of a binder to the briquetting mixture. Briquettes can have any shape, but the most common is the shape of a cylinder. The briquettes must be strong enough to eliminate the possibility of damage during transport and must be strong enough even at high temperatures. The briquettes have a regular shape, have the same weight, are more durable and easier to transport. They are ecologically safe and it is possible to use carbon filling in briquettes to

APA, Harvard, Vancouver, ISO, and other styles

4

Bang, Henrik, Jakob Mølholm, and Kirsten Grønning Sørensen. "A Recent Case of Intermetallic Precipitations in Super Duplex Stainless Steel." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16603.

Full text

Abstract:

ABSTRACT This article is based on a failure analysis, where a pressurized 4” super duplex (UNSS32760) elbow from a hydrocarbon system suddenly leaked during service, due to a 90 mm long crack. The crack originated from a corrosion pit and was caused by intermetallic precipitations in the microstructure in a small area of the elbow. The intermetallic precipitations were the result of inadequate heat treatment of the elbow during production. A screening procedure based on ferrite measurements applying handheld ferrite measurement devices was developed. If the screening revealed ferrite values ou

APA, Harvard, Vancouver, ISO, and other styles

5

Bang, Henrik, Jakob Mølholm, and Kirsten Grønning Sørensen. "A Recent Case of Intermetallic Precipitations in Super Duplex Stainless Steel." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17627.

Full text

Abstract:

Abstract This article is based on a failure analysis, where a pressurized 4” super duplex (UNSS32760) elbow from a hydrocarbon system suddenly leaked during service, due to a 90 mm long crack. The crack originated from a corrosion pit and was caused by intermetallic precipitations in the microstructure in a small area of the elbow. The intermetallic precipitations were the result of inadequate heat treatment of the elbow during production. A screening procedure based on ferrite measurements applying handheld ferrite measurement devices was developed. If the screening revealed ferrite values ou

APA, Harvard, Vancouver, ISO, and other styles

6

Phan, Andrew M., Michael P. Summers, and John P. Parmigiani. "Optimization Device for Grinding Media Performance Parameters." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64210.

Full text

Abstract:

The investment casting industry relies heavily on the use of grinding media during manufacturing. Typically, grinding media, when used in this application, have very short effective lifetimes. Determining the optimum life of grinding media is a key cost-containment and manufacturing-efficiency issue. However, current methods for determining optimum life as well as evaluating new grinding media products and optimum operating parameters are highly subjective and often is a matter of operator opinion. This subjectivity can lead to the premature retirement or overuse of grinding media, increasing

APA, Harvard, Vancouver, ISO, and other styles

7

SLÍVA, Aleš, and Robert BRÁZDA. "DESIGN OF NEW Grinding device for Homogenization of Mechanical Grinding METALLURGY Process." In METAL 2020. TANGER Ltd., 2020. http://dx.doi.org/10.37904/metal.2020.3615.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Boldering, Alexander L., and Annika Raatz. "A Design of an Active Tool Holding Device." In ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-7931.

Full text

Abstract:

The challenge of producing high performance, productive and precise machine tools must be accepted by the machine tool industry. These requirements can be reached by increasing the grinding machine parameters, such as the cut depth or the feed rate. Both will increase the grinding force during the grinding process, and can result in an excitation of the machine structure. Based on this excitation, the machine structure shows an undesired dynamic behavior which can result in machine vibrations. These vibrations can cause chatter marks on the workpiece surface, and if large enough can result in

APA, Harvard, Vancouver, ISO, and other styles

9

Lund, Lance D., and Harvey L. Morton. "A Spherical Grinding Head." In Optical Fabrication and Testing. Optica Publishing Group, 1986. http://dx.doi.org/10.1364/oft.1986.wa6.

Full text

Abstract:

A prototype spherical grinding spindle has been developed for the generation of difficult aspheric surfaces. This device uses a peripheral grinding wheel rotating about two orthogonal axes to produce a spherical grinding surface which wears uniformly during the generation of an aspheric surface. Hydrostatic bearings are used for both axes and the design and performance of these bearings will be discussed. The grinding forces for numerically controlled grinding have been measured using a three axis dynamometer. The subsurface fracture depth has been characterized for both continuous and intermi

APA, Harvard, Vancouver, ISO, and other styles

10

Liew Loy Seng. "The challenge of grinding technology for TSV and BSI device." In 2012 13th International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP). IEEE, 2012. http://dx.doi.org/10.1109/icept-hdp.2012.6474775.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Grinding device"

1

Quarry, Mike. PR-462-143703-R01 Development and Evaluation of Guided Wave Structural Health Monitoring for Buried Pipe. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011594.

Full text

Abstract:

Excavations to inspect buried piping are often costly and risk damaging other plant assets during the digging. Some utilities have used permanently installed guided wave sensors to monitor piping condition and reduce the excavations. The project that is the subject of this report has two objectives-to evaluate the current state-of-the-art and to create a test bed for vendors to improve their technology and data analysis algorithms. Understanding the state-of-the-art will enable utilities to effectively use guided wave structural health monitoring in support of their underground piping aging ma

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!