Log in

Relevant bibliographies by topics / Halay / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Halay.

Dissertations / Theses on the topic 'Halay'

Author: Grafiati

Published: 5 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Halay.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Ali, Noaman, and Alisa Wanwang. "Halal Food : Thai Halal Food Products and International Market." Thesis, Karlstads universitet, Fakulteten för ekonomi, kommunikation och IT, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-7259.

Full text

Abstract:

This paper aims to examine salient issues in the Halal food business with special focus on entering Thai Halal food products into international market. Market screening plays an important role in entering new market or setting up the business in the foreign country. In this paper we have analyzed the importance of Halal Food for the Muslims and explained the growth of Halal food in French markets. The study focuses attention on the identification of key areas in Halal food export and channel strategy. The Thai food industry is amongst dynamic and diverse and we investigated the entering proces

APA, Harvard, Vancouver, ISO, and other styles

2

Trachtulcová, Šárka. "Výrobní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372106.

Full text

Abstract:

The subject of this diploma thesis is desigh and assessment of steel structure industrial building. This hall has two bays. The width of the main bay is 30 metres, the width of the second bay is 15 metres. The length of building is 90 metres. Load-bearing system is created of three fixed columns with pin-supported truss beams between. Construction of roof is designed as truss purlin system. There is a bridge crane of 32 tons capacity. The building is situated in area of Uherské Hradiště.

APA, Harvard, Vancouver, ISO, and other styles

3

Padrtka, Tomáš. "Sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372253.

Full text

Abstract:

The aim of the diploma thesis is to elaborate the project documentation of the sports hall in the town of Bystřice nad Pernštejnem. The object is situated in an area with several other sports grounds. The building is partially basement with one overground floor. On the first floor there is a large and small gym, a fitness room and two massage rooms. There are also changing rooms for guests, staffing facilities, utility room, technical room and office for the managers of the sports hall. The underground floor features a bar with a billiard room and bowling. In the basement is also designed a wa

APA, Harvard, Vancouver, ISO, and other styles

4

Kačírek, Michal. "Sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372294.

Full text

Abstract:

The aim of the final thesis is to design steel structure of the sports hall in Brno. The design is processed in two options. The option "A" is designed in variant of flat space frame with dimensions 78x46,5 m and the structure height is 13,0 m. The option "B" is designed in variant of truss girder with parabolic lower belt and purlin. Dimensions are 84x46,5 m and the structure height is 12,8 m. Roof covering and curtain walling is made of sendwich panels with polyurethane foam and trapezoidal sheet.

APA, Harvard, Vancouver, ISO, and other styles

5

Beran, Miroslav. "Výrobní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392241.

Full text

Abstract:

The diploma thesis deals with the design and assessment of the steel supporting structure of the production hall. The transverse dimension of the hall is 21,00 m, the longitudinal dimension is 70,00 m, the height of the hall is 17,56 m. S355 steel is used as the main supporting material. The supporting part of the hall consists of columns on which is placed a truss and two crane tracks at two height levels. Three different types of purlins and pillars are considered in the design of the steel structure. For the selected variant, a static calculation of the main bearing elements, including sele

APA, Harvard, Vancouver, ISO, and other styles

6

Olejníček, Pavel. "Strojírenská hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410069.

Full text

Abstract:

The diploma thesis deals with a new building of a single-storey production object, which is made as a precast concrete frame with a lightweight cladding. Part of the new building is also facilities for employees and its administrative staff, which is also based on precast concrete frame divided into two floors. Cladding is made as masonry with ventilated facade. The internal division of buildings is made by plasterboard partitions. The project is located in the industrial zone Košíkov near Velká Bíteš.

APA, Harvard, Vancouver, ISO, and other styles

7

Horká, Petra. "Sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225530.

Full text

Abstract:

The goal of this master´s thesis is to design load bearing structure of a sports hall. The thesis is elaborated in two variants of the structure design of the sports hall for common types of sports (handball, footsal, tennis, volleyball, basketball). The ground plan dimension is 42 to 72 meters and the construction height is 8 meters. The construction is designed for the district of Brno city. In the structural anlysis there were the following main load bearing structural elements designed and examined: glue laminated timber truss, wood purlins, steel beams, rods and bracing, columns, which to

APA, Harvard, Vancouver, ISO, and other styles

8

Forman, Radek. "Průmyslová hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225667.

Full text

Abstract:

Two-bay hall for warehouse and manufacturing purposes with supporting steel structure and thermally insulating sheating with width of 36 metres and lenght of 72 metres. The hall incorporates two overhead cranes with maximum load of 32 and 40 tonnes. The main supporting structure is a system of plate girders and beams. The beams are connected with hinges and are placed with intervals of 6 metres. The hall design is intended for 1st snowing area

APA, Harvard, Vancouver, ISO, and other styles

9

Hindráková, Kateřina. "Sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225868.

Full text

Abstract:

The aim of this master‘s thesis is to design a sports hall including an accommodation facility in Hradec Králové. Sports hall is situated in a town district called Věkoše. It is tree-storey building equipped with combined pillar‘s and wall‘s support system. Building is founded on solid slab and propped piles. Pillars are made of steel, walls are made of ceramic bricks and curved roof is made of gluelam beams and roof trusses with aluminum cover system Kalzip. There are two single ply flat roofs. Also basement is a part of the building. For spectators two separated auditoriums with steel suppor

APA, Harvard, Vancouver, ISO, and other styles

10

Dušková, Jitka. "Nádražní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226053.

Full text

Abstract:

The main aim of this master´s thesis is design and Cheb load-carrying steel structure of railway station in two variatons. A given object is situated in Ústí nad Orlicí.The steel structure is created by central nave, his dimensions is 30,0 x 30,0 m, and two secondary naves and his dimensions is 18,0 x 18,0 m.The central nave is two-storey height 12,4 m and secondary nave is single-storey height 5,5 m. Carrying building systém is created croos-column links, which are composed pipes. Cross-links are saved on fixed columns. The calculation was done through the use of Scia Engineer 2008 program an

APA, Harvard, Vancouver, ISO, and other styles

11

Nováková, Hana. "Curlingová hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226061.

Full text

Abstract:

Design of load bearing steel structure of a curling building. Examination of main load bearing building blocks. Examination of selected details. Drawing of disposition and selected details. Elaboration of manufactory drawings of chosen segments.

APA, Harvard, Vancouver, ISO, and other styles

12

Kubíček, Ján. "Odbavovací hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226896.

Full text

Abstract:

This thesis focuses on the design and assessment of the supporting steel structure of departures hall for international airport Pardubice. The design is processed in two variants, one of which is selected and further elaborated. The hall contains one-story built for office and comercial use. To obtain the internal forces in the structure, modelling of the hall in the FEM computermodeling software was selected. The thesis includes manual assessment of selected elements and details, the assessment of elements in computational software, drawings and bill of material.

APA, Harvard, Vancouver, ISO, and other styles

13

Kozák, Tomáš. "Výrobní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227160.

Full text

Abstract:

The topic of this diploma thesis is design of new production hall in the cadastral area of city Hrusinec. The building is located in an existing industrial area. The building consists of two adjacent structures. The higher of them is single-story production hall and the lower is three-story high office building. In horizontal plane the buildings have rectangular shape. Hall part is designed as a steel structure on foundation blocks. Roof is supported by truss girders. Office building is designed as a monolithic reinforced concrete skeleton also on foundation blocks. The flat roof of the office

APA, Harvard, Vancouver, ISO, and other styles

14

Ščudla, Pavel. "Skladovací hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227196.

Full text

Abstract:

The master´s thesis on the topic Storage hall is processed in the form of project documentation for the realization of the new building. This building is projected on a plot 2828/108, 2828/106, 2828/105, 2828/104, 2828/222 and 2828/107 in the cadastral area Brno – Cernovice. This building is adjoined to the existing production hall and is divided into two parts. This parts are storage and administration. The administrative part has two floors and includes office space and hygienic facilities for own employees. The storage part is determined for storing of plastic products.

APA, Harvard, Vancouver, ISO, and other styles

15

Hodonský, Petr. "Nádražní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227213.

Full text

Abstract:

The content of the diploma thesis is design and assessment of railway station steel structure. It is a two-nave building with a length of 198m. The bigger nave span is 40m and it is 14m high. The smaller nave is 11m high and its span is 25m. The total width of the structure is 65 meters. The main construction material is S355JR steel. The supporting structure of the hall is formed by a curved planar trusses with axial distance of 6 meters. The transverse direction also consists of column that bears two main trusses. The static analysis of the main bearing parts of the structure, including join

APA, Harvard, Vancouver, ISO, and other styles

16

Zogata, Pavel. "Sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227267.

Full text

Abstract:

In my diploma thesis the proposal is developed as supporting steel structure sports hall with dimensions 45 x 54 m, a maximum height of 15.5 meters,for the area of Znojmo. In a static calculation are designed and assessed the main bearing structural components such as solid panel purlins, spatial lattice truss, bracing and solid panel columns, which together with the truss form create a crosslinks, column bases and anchoring, plus Tribune.The work includes the design documentation consisting of a layout drawing, drawing anchoring and drawing selected details.

APA, Harvard, Vancouver, ISO, and other styles

17

Kulichová, Jana. "Letištní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227583.

Full text

Abstract:

The construction of the concourse is designed from steel.Construction was designed in 2 variants.The construction of the hall is radially curved in plan view with a circular sector on the longitudinal side.Roof structure consists of eight trusses at an axial distance of 9 m.Tracks are arched truss designed as a parallel.Trusses are designed to span 40m.Maximum ground clearance hall at the top is 14 meters.Letištní hala byla řešena v programu Scia Engineer 2014 a součástí je i výkresová dokumentace.

APA, Harvard, Vancouver, ISO, and other styles

18

Štelc, Martin. "Sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227647.

Full text

Abstract:

This diploma thesis deals with the design expertise and supporting structures the single-roof sports hall for locality Brno. The ground plan dimensions are 42 x 72 m and ground clearance of about eight meters. Two variants are processed and selected variant is elaborated in detail. The sports hall is designed for most sports played indoors. In a static calculation are designed and assessed the main load-bearing elements such as truss glued laminated timber, wooden purlins, columns, girts and bracing. The work includes drawings.

APA, Harvard, Vancouver, ISO, and other styles

19

Osyková, Martina. "Skladovací hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240203.

Full text

Abstract:

The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with c

APA, Harvard, Vancouver, ISO, and other styles

20

Tayob, Shaheed. "Consuming, producing, defining halal : halal authorities and Muslim consumers in South Africa." Master's thesis, University of Cape Town, 2012. http://hdl.handle.net/11427/12608.

Full text

Abstract:

Includes bibliographical references.<br>Nineteen eighty-five was the year in which the first halal-certified non-meat product appeared in South African stores. The certifying authority was the Muslim Judicial Council of Cape Town and the product was Flora-margarine. The certification of a non-meat product signaled a major shift in halal in South Africa. It represented the development of a halal consciousness that extended beyond the realm of purely meat products and into the unseen, intangible, expert-controlled world of food technology. Other developments also contributed to the growing halal

APA, Harvard, Vancouver, ISO, and other styles

21

Šandor, Peter. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409834.

Full text

Abstract:

The goal of my thesis is the design of a multipurpose sport hall in Litoměřice locality made in two separate variants. Objects ground plan dimensions are 38x38 meters and the height of the object is 16 meters. Used material is S235 steel and C20/25 concrete. The periphery and roof casing of the object is realized from sandwich panels. The carrying construction of the object is made from cross truss, oblong truss and from pillars. Thesis consists of assessing the carrying elements of the construction, selected details and drawing documentation.

APA, Harvard, Vancouver, ISO, and other styles

22

Hrabovská, Kristýna. "Vícelodní průmyslová hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409850.

Full text

Abstract:

The principal aim of this thesis is to design two possible options for the steel structure of a new multibay industrial hall located in Slavkov u Brna. An overhead crane with load capacity of 12.5 metric tons will by situated in one of the bays. The hall has a rectangular shape with dimensions of 63x48 meters, each of the two bays has dimensions of 63x24 meters, a height of 11.5 meters and a saddle roof with an angle of slope 10°. Both of the options have the same layout design, the only difference is that option 1 has columns with truss girders while option 2 has a transversal frame with a ha

APA, Harvard, Vancouver, ISO, and other styles

23

Mešťan, Vojtěch. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225454.

Full text

Abstract:

The objective of this Master´s thesis is to create and examine two versions of the project for a bearing steel structure of a multi-purpose sports building) in Polička. The multi-purpose sports hall has dimensions 33 x 48 metres with a terraced floory part that has dimensions 18 x 24 metres. The hall is made of cross-links from lattice truss placed on fixed columns. The structure ridgidity is by wind braces. The storey part is made coupled steel-conrete slabs attached to the columns. The ridgidity of the storey part is provided by lattice braces in traverse and longitudinal direction. The thes

APA, Harvard, Vancouver, ISO, and other styles

24

Nacházel, Jakub. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226765.

Full text

Abstract:

This master’s thesis deals with the design documentation multifunction sports hall. The building is situated in the region in the Vysočina village Humpolec, cadastral district Humpolec. The building is designed as a prefabricated skeleton, where the vertical load-bearing structures are designed from the prefabricated skeleton of PREFA BRNO and filling and partition walls of the structural system POROTHERM and BTB fittings. Horizontal structures are formed by the supporting elements prefabricated skeleton system of PREFA BRNO and ceiling panels SPIROLL. The main single-storey multifunction hall

APA, Harvard, Vancouver, ISO, and other styles

25

Vyskočil, Stanislav. "Novostavba výrobní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226776.

Full text

Abstract:

Master´s thesis deals with the project documentation of the design of the new building hall of production. This hall is situated in Slapy at Tábor. Design and appendix´s were made by the present valid laws, goverment´s restrictions and standards. This object is placed in ground plot number 104/12, the land cadastre of Slapy at Tábor. The building object is designated for factory and storage area. Next to the building plot carry underground services. In the building object is factory hall and cloakroom for 2-4 employes. Director´s flat is in first floor. Building has two floors and floor plan 1

APA, Harvard, Vancouver, ISO, and other styles

26

Baudišová, Monika. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226911.

Full text

Abstract:

This thesis deals with design of a multi-purpose sports hall. The aim of this work is to design a support structure with a diameter of 80.0 m at ± 0.000. Construction of a circular layout in the level of ± 0.000 of an external diameter 80.0 m. Height of the hall at the top is 20.0 m Indoors girders is solved in 36 beams which meet at the middle of the rings. Ensure the stability of bracing. Anchoring is done by pin connections located at the bottom of the strip, anchored in concrete bases through the base plate and pre-concreted anchor bolts.

APA, Harvard, Vancouver, ISO, and other styles

27

Holemy, Ondřej. "Víceúčelová spotrovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227187.

Full text

Abstract:

The master‘s thesis concerns about the freestanding multipurpose sport hall with a base for sportsmen and spectators and its associated sport and regeneration centre. The object is situated in a city district Brno Bohunice. The designed building is divided into a single storey multipurpose sport hall and an outbuilding with two above-ground floors and a partial third floor above the entrance part of the building. Object’s plan shape forms a rectangle with recessed entrance part. The load-bearing structure consists of a combined column and wall construction system. The main multipurpose hall is

APA, Harvard, Vancouver, ISO, and other styles

28

Vrátný, Martin. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227188.

Full text

Abstract:

This thesis describes the design of a multipurpose sports hall in Pribram. The sports hall is situated in the town of Pribram II. The aim of this work is to propose bearing structure with dimensions 49 x 28 halls has a background in the shape of L in the level of ± 0.000. Maximum height of the hall is 14 meters.Structure of the hall consists of arched trusses in 7 m grid supported by steel columns. This is a column support system. The building is based on the footings. Ensure stability bracing. Perimeter and roof cladding consists of sandwich panels.

APA, Harvard, Vancouver, ISO, and other styles

29

Sovák, Nikola. "Vytápění průmyslové haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227503.

Full text

Abstract:

This theses deals with large objects heating issue, more precisely, heating of industrial halls. The theses focuses primarily on the most effective way of heating, given the economical and hygienical functionality of the object. Heating options of the object and selection of the most appropriate one, according to the specified documents, are also mentioned in this work.

APA, Harvard, Vancouver, ISO, and other styles

30

Bém, Miroslav. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227528.

Full text

Abstract:

The aim of the master’s thesis is design and assessment of multipurpose sport hall structure. located in Moravské Budějovice. The hall has rectangular ground plan and it is 40 m wide and 48 long. The proposal is developed in four variants according to ČSN EN. Structure is composed of rolling sections and tubes. The main bearing components are arched trusses. In both gable walls are designed steel truss columns. Structure has been accomplished by Scia Engineer 14 and hand computation

APA, Harvard, Vancouver, ISO, and other styles

31

Habarta, Michal. "Víceúčelová sportovní hala." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227761.

Full text

Abstract:

Multifunctional sports hall designed as the local city sporting center. It’s including sport hall, pool hall,squash hall, and the parts including changing rooms, showers, toilets and technical equipment. The roofs are flat, the object has no cellar.

APA, Harvard, Vancouver, ISO, and other styles

32

Bartosch, Václav. "Montovaná konstrukce haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265482.

Full text

Abstract:

Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa

APA, Harvard, Vancouver, ISO, and other styles

33

Machula, Lukáš. "Rozvoj "halal" obchodu ve světě." Master's thesis, Vysoká škola ekonomická v Praze, 2013. http://www.nusl.cz/ntk/nusl-193855.

Full text

Abstract:

The presented diploma thesis Development of "halal" trade in the world deals with the detailed analysis of this current socio-economic phenomenon. The thesis aims to provide the reader with a more detailed and comprehensive view of one of contemporary fastest growing markets in the world in general. Thanks to its unification, halal market is the only market in the world that transcends both religious as well as geographical and cultural boundaries. In this diploma thesis the development of the halal market in the world is viewed from the perspective of theoretical background and practical appl

APA, Harvard, Vancouver, ISO, and other styles

34

Lenhart, Marek. "Optimalizace větrání divadelní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371999.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Prášek, Martin. "Návrh prefabrikované haly CARGO." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372303.

Full text

Abstract:

Master’s thesis describes the structural design and static analysis of selected elements of prefabricated reinforced concrete industrial building, that will be used as storage hall. Purpose of thesis is elaboration of assembly drawings of the project documentation and drawings of formwork and reinforcement assembly of selected elements. Calculations were performed in computer programs for static analysis SCIA Engineer 16, IDEA StatiCa and FIN EC. Drawing were made in programs Allplan 2016 and AutoCad 2015.

APA, Harvard, Vancouver, ISO, and other styles

36

Myjavec, Patrik. "Optimalizace vzduchotechniky výrobní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391909.

Full text

Abstract:

Diploma thesis is divided into two parts. The theoretical part deals with natural ventilation and the practical part focuses on the optimization of the ventilation in the original hall using CFD simulation. One of the solutions is proposed in the design part of the diploma thesis.

APA, Harvard, Vancouver, ISO, and other styles

37

Drahokoupilová, Nikola. "Ocelová konstrukce sportovní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392198.

Full text

Abstract:

The subject of this thesis is the design and assessment of steel sports hall in the town of Krnov. The main structural material is steel S355JR. The ground plan dimensions of the object is 48,0 metres to 36,0 metres, the height of the object is 16,78 metres. There is a sport facilities unit adjusted to the construction . The dimension of such an object is 30,0 metres to 8,0 metres. The support system consists of columns and an arched trussed rafter. The axial distance of cross-links is 8,0 m. The spatial rigidity is ensured by the transverse and longitudinal bracings. The hall is founded on re

APA, Harvard, Vancouver, ISO, and other styles

38

Makiš, Daniel. "Ocelová konstrukce víceúčelové haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392308.

Full text

Abstract:

The subject of diploma thesis is design and static assessment of steel structure of multipurpose hall. Construction is located in the city Brno. The floor plan is rectangular with dimensions 60 x 80 m. Headroom of the structure is 12,5 m and total height is 16,5 m. A main frame is created of arch truss supported by column and truss structure on both sides. The main frames are joined by purlins. Final support structure was selected from two preliminary variants. For the selected variant was made static calculation of main bearing elements including joints and anchoring, technical report, drawin

APA, Harvard, Vancouver, ISO, and other styles

39

Králíček, Jiří. "Nosná konstrukce sportovní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409855.

Full text

Abstract:

The aim of the master thesis is design and check the timber construction of the sports hall in two variants. The first variant is a frame, which is formed by three steel columns. The roof structure is made from timber trusses, which is pin-supported beam above both fields. The second variant is a frame, which is formed by three steel-concrete columns. The roof structure is made from timber glulam beam of saddle shape, which is continuous over both fields. Spatial rigidity of the structure is ensured by steel bars. The second variant is calculated in detail by hand and the structure drawings ar

APA, Harvard, Vancouver, ISO, and other styles

40

Malec, Pavel. "Výrobní hala se zázemím." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-410048.

Full text

Abstract:

The subject of my thesis is to elaborate the project documentation for construction execution of an administrative building with added production hall which is found in the town Benešov near Prague. The object of the administrative building has one underground and free above-ground floors. The underground floor serves for operating purposes connected with production. The first above-ground floor serves for staff catering. On the second above-ground floor we can find social rooms, dressing rooms and washrooms for employees. Offices can be found on the last third above-ground floor. Vertical sup

APA, Harvard, Vancouver, ISO, and other styles

41

Grufíková, Markéta. "Víceúčelová hala v Hodoníně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225466.

Full text

Abstract:

Master´s thesis describes the design and the check of the construction of the art gallery. This hall has the elliptical ground plan, the main dimensions are 25 x 40 m and the height is 12 m. The structure consists of 24 supporting curved ribs, which are supported on elliptical ring of steel at the top of the construction. Between the ribs are inserted purlins, which support the perimeter cladding. The structure is designed alternatively like the system of the timber solid beams from the glued laminated timber and the system of the steel truss girders.

APA, Harvard, Vancouver, ISO, and other styles

42

Vaněček, Milan. "Ocelová konstrukce sportovní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225502.

Full text

Abstract:

Master thesis is focused on design of steel roofing structure of sports hall. Construction is located in town of Jihlava. Proportions and disposition are in accordance of assignment of master thesis. The proportions are 40m x 60m, the height of structure is approximately 15m. Two versions of roof structure were designed – truss beam with shape of lentil and double reverse truss girders (girland truss). These versions were tentatively analyzed and designed for the main bearing members. Afterwards both of the versions were appraised and one of the versions was chosen for detailed treatment. It m

APA, Harvard, Vancouver, ISO, and other styles

43

Janoušek, Vít. "Ocelová konstrukce průmyslové haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225531.

Full text

Abstract:

The diploma thesis contains design of steel one-aisle industrial hall with span 24 m, length 63 m and height of the holder of a crane track girder 8,7 m. In hall are two overhead cranes, first with load capacity 50 tons and second with load capacity 32 tons. Main structural material is steel S 450. Is processed several versions and one is processed in detail. Drawings contain platform and section of hall and manufacturing drawings of crane runway.

APA, Harvard, Vancouver, ISO, and other styles

44

Mičola, Jan. "Nádražní hala ve Vsetíně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225532.

Full text

Abstract:

The master's thesis deals with the steel structures in building industry. The aim of this paper is to propose and statically evaluate the load-bearing steel structure of railway station in Vsetín. After solving the construction load by the roof cladding and external cladding, it follows by an assessment of individual elements of construction, including an assessment of their joints. From a static perspective, the roof structure consists of two diagonal arches which are joined into each other in the top and two longitudinals frames. The entire structure is designed with an emphasis on freedom o

APA, Harvard, Vancouver, ISO, and other styles

45

Družbík, Jiří. "Sportovní hala v Písku." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225533.

Full text

Abstract:

The theme of the master’s thesis is to design steel structures sports hall. The proposal is developed in three variants according to ČSN EN. The work addresses the static effect of the steel structure and design of parts and materials design. Plan dimensions are 60x38m, max. internal height is 9,3m. The structure is designed for ultimate limit states and serviceability. The supporting structure is designed as roof arches surround an elliptical girder. In both gable walls are designed steel columns. The work also details and solution design. Sports hall was solved in Scia Engineer 2011 and incl

APA, Harvard, Vancouver, ISO, and other styles

46

Ševčíková, Lenka. "Bazénová hala v Ostravě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226066.

Full text

Abstract:

The goal of Master´s thesis is design and assessment of the swimming pool hall in Ostrava. Tha hall has two parts – swimming pool and other places for facility and free time activities.The hall has rectangle plan of dimension 30x47,4 and 15x45m. Three construction will be design. The steel truss girder wil be elaborate.

APA, Harvard, Vancouver, ISO, and other styles

47

Kreisel, Martin. "Ocelová konstrukce sportovní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226068.

Full text

Abstract:

Steel structure of the sports hall in the city of Olomouc. Specific design is chosen from three options. Plan dimensions of 45 x 60 m. Height 12.5 m. Structure is composed of rolled profiles and tubular steel. Two trusses girders are fixed by knuckle joints on pillars. Static check is performed using the program SCIA ENGINEER 2009 and the manual review.

APA, Harvard, Vancouver, ISO, and other styles

48

Ivánek, Robert. "Ocelová konstrukce výrobní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226069.

Full text

Abstract:

Item of Master´s thesis is to design, review and compare two variants of steel structures production hall with overhead crane with load capacity 25t. One variant is frame construction and second one is construction with trusses. Layout dimensions is 45m x 60m and the height of the ridge is 10m. Stability is provided by wall and roof bracings. Building is sheathed. Structures is situated in Frýdek - Místek.

APA, Harvard, Vancouver, ISO, and other styles

49

Němec, Petr. "Projekt zastřešení výstavní haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226442.

Full text

Abstract:

The Diploma’s thesis is focused on the design of selected parts of reinforced concrete exhibition hall (prestressed concrete purlin, prestressed concrete girder, reinforced concrete column, reinforced concrete footing, post-tensioned concrete girders). The load calculation (the self weight, the permanent load, the wind load, the snow load and imposed load), the design and the review of selected reinforced concrete items and the drawing documentation are included in this thesis.

APA, Harvard, Vancouver, ISO, and other styles

50

Milich, Marek. "Sportovní hala v Jihlavě." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226641.

Full text

Abstract:

The aim of this master´s thesis is design and statically examine a bearing structure of ice hockey stadium in Jihlava with axial ground area measuring 43x85 m. Design od structure was prepared in three variants. The core bearing structure composed of three-joint arched roof beam create timber and steel lower beam, or solid wood of glulam timber. The third variant was work out in detail. Scia Engineer 2013 software has been used to create a three-dimensional model for the purpose of dimensioning each member and global analysis. Results obtained from the computer analysis were taken and double-c

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!