Log in

Relevant bibliographies by topics / Hard Tissue Biomedical Applications

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Hard Tissue Biomedical Applications'

Author: Grafiati

Published: 5 September 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Hard Tissue Biomedical Applications.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Hard Tissue Biomedical Applications"

1

Ben-Nissan, B. "Nanoceramics in Biomedical Applications." MRS Bulletin 29, no. 1 (2004): 28–32. http://dx.doi.org/10.1557/mrs2004.13.

Full text

Abstract:

AbstractAn improved understanding of the interactions at the nanoscale level between the bioceramics in medical implants and the hard or soft tissues in the human body could contribute significantly to the design of new-generation prostheses and postoperative patient management strategies.Overall, the benefits of advanced ceramic materials in biomedical applications have been universally accepted, specifically in terms of their strength, biocompatibility, hydrophilicity, and wear resistance in articulating joints.The continuous development of new-generation implants utilizing nanocoatings with

APA, Harvard, Vancouver, ISO, and other styles

2

Neubauer, Vanessa J., Annika Döbl, and Thomas Scheibel. "Silk-Based Materials for Hard Tissue Engineering." Materials 14, no. 3 (2021): 674. http://dx.doi.org/10.3390/ma14030674.

Full text

Abstract:

Hard tissues, e.g., bone, are mechanically stiff and, most typically, mineralized. To design scaffolds for hard tissue regeneration, mechanical, physico-chemical and biological cues must align with those found in the natural tissue. Combining these aspects poses challenges for material and construct design. Silk-based materials are promising for bone tissue regeneration as they fulfill several of such necessary requirements, and they are non-toxic and biodegradable. They can be processed into a variety of morphologies such as hydrogels, particles and fibers and can be mineralized. Therefore, s

APA, Harvard, Vancouver, ISO, and other styles

3

Bodea, Ioana Maria, Giorgiana Mihaela Cătunescu, Teodor Florian Stroe, Sonia Alexandra Dîrlea, and Florin Ioan Beteg. "Applications of bacterial-synthesized cellulose in veterinary medicine – a review." Acta Veterinaria Brno 88, no. 4 (2019): 451–71. http://dx.doi.org/10.2754/avb201988040451.

Full text

Abstract:

Tissue engineering promotes tissue regeneration through biomaterials that have excellent properties and have the potential to replace tissues. Many studies show that bacterial cellulose (BC) might ensure tissue regeneration and substitution, being used for the bioengineering of hard, cartilaginous and soft tissues. Bacterial cellulose is extensively used as wound dressing material and results show that BC is a promising tissue scaffold (bone, cardiovascular, urinary tissue). It can be combined with polymeric and non-polymeric compounds to acquire antimicrobial, cell-adhesion and proliferation

APA, Harvard, Vancouver, ISO, and other styles

4

Liu, Haifeng, Xili Ding, Gang Zhou, Ping Li, Xing Wei, and Yubo Fan. "Electrospinning of Nanofibers for Tissue Engineering Applications." Journal of Nanomaterials 2013 (2013): 1–11. http://dx.doi.org/10.1155/2013/495708.

Full text

Abstract:

Electrospinning is a method in which materials in solution are formed into nano- and micro-sized continuous fibers. Recent interest in this technique stems from both the topical nature of nanoscale material fabrication and the considerable potential for use of these nanoscale fibres in a range of applications including, amongst others, a range of biomedical applications processes such as drug delivery and the use of scaffolds to provide a framework for tissue regeneration in both soft and hard tissue applications systems. The objectives of this review are to describe the theory behind the tech

APA, Harvard, Vancouver, ISO, and other styles

5

Suwanprateeb, Jintamai. "Tissue Integrated 3D Printed Porous Polyethylene Implant." Key Engineering Materials 798 (April 2019): 65–70. http://dx.doi.org/10.4028/www.scientific.net/kem.798.65.

Full text

Abstract:

Synthetic polymers are widely used in biomedical applications due to their advantages compared to other materials including low cost and ease of processability, good corrosion resistance and high properties to weight ratio. Among several polymeric biomaterials, polyethylene is a biocompatible polymer which has a long history of being utilized in many biomedical applications ranging from simple components to advanced implants. Although dense polyethylene is known to be a bioinert material which does not interact with host tissue, polyethylene in its appropriate porous form has been shown to be

APA, Harvard, Vancouver, ISO, and other styles

6

Yuan, Bin, Min Zhu, and Chi Yuen Chung. "Biomedical Porous Shape Memory Alloys for Hard-Tissue Replacement Materials." Materials 11, no. 9 (2018): 1716. http://dx.doi.org/10.3390/ma11091716.

Full text

Abstract:

Porous shape memory alloys (SMAs), including NiTi and Ni-free Ti-based alloys, are unusual materials for hard-tissue replacements because of their unique superelasticity (SE), good biocompatibility, and low elastic modulus. However, the Ni ion releasing for porous NiTi SMAs in physiological conditions and relatively low SE for porous Ni-free SMAs have delayed their clinic applications as implantable materials. The present article reviews recent research progresses on porous NiTi and Ni-free SMAs for hard-tissue replacements, focusing on two specific topics: (i) synthesis of porous SMAs with op

APA, Harvard, Vancouver, ISO, and other styles

7

Kalirajan, Cheirmadurai, Amey Dukle, Arputharaj Joseph Nathanael, Tae-Hwan Oh, and Geetha Manivasagam. "A Critical Review on Polymeric Biomaterials for Biomedical Applications." Polymers 13, no. 17 (2021): 3015. http://dx.doi.org/10.3390/polym13173015.

Full text

Abstract:

Natural and synthetic polymers have been explored for many years in the field of tissue engineering and regeneration. Researchers have developed many new strategies to design successful advanced polymeric biomaterials. In this review, we summarized the recent notable advancements in the preparation of smart polymeric biomaterials with self-healing and shape memory properties. We also discussed novel approaches used to develop different forms of polymeric biomaterials such as films, hydrogels and 3D printable biomaterials. In each part, the applications of the biomaterials in soft and hard tiss

APA, Harvard, Vancouver, ISO, and other styles

8

Bettini, Simona, Valentina Bonfrate, Ludovico Valli, and Gabriele Giancane. "Paramagnetic Functionalization of Biocompatible Scaffolds for Biomedical Applications: A Perspective." Bioengineering 7, no. 4 (2020): 153. http://dx.doi.org/10.3390/bioengineering7040153.

Full text

Abstract:

The burst of research papers focused on the tissue engineering and regeneration recorded in the last years is justified by the increased skills in the synthesis of nanostructures able to confer peculiar biological and mechanical features to the matrix where they are dispersed. Inorganic, organic and hybrid nanostructures are proposed in the literature depending on the characteristic that has to be tuned and on the effect that has to be induced. In the field of the inorganic nanoparticles used for decorating the bio-scaffolds, the most recent contributions about the paramagnetic and superparama

APA, Harvard, Vancouver, ISO, and other styles

9

Guimerà, A., E. Calderón, P. Los, and A. M. Christie. "Method and device for bio-impedance measurement with hard-tissue applications." Physiological Measurement 29, no. 6 (2008): S279—S290. http://dx.doi.org/10.1088/0967-3334/29/6/s24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

SHI, J. Z., C. Z. CHEN, SHUJUAN ZHANG, and YINGJING WU. "APPLICATION OF SURFACE MODIFICATION IN BIOMEDICAL MATERIALS RESEARCH." Surface Review and Letters 14, no. 03 (2007): 361–69. http://dx.doi.org/10.1142/s0218625x07009669.

Full text

Abstract:

In this paper, the applications and qualifications of biomedical materials are introduced. In regard to the hard tissue implants, the biocompatibility can be improved by preparing various bio-ceramic and bio-glass coatings. In view of this, the principles, characteristics, and applications of surface modification (plasma spraying, electrostatic spray deposition, micro-arc oxidation, pulsed laser deposition, sol–gel deposition, and magnetron sputtering) in biomedical materials are reviewed. In addition, the research direction of improving biocompatibility by surface modification is presented.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Hard Tissue Biomedical Applications"

1

Georgiou, George. "Development of glass reinforced hydroxyapatite for hard tissue surgery." Thesis, University College London (University of London), 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.272326.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Peterson, David. "Tissue equivalent phantom development for biomedical applications." [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0025025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Wong, Alfred T. C. "Precipitation behaviour of calcium phosphate : a model for hard tissue mineralisation." Thesis, University of Oxford, 1993. http://ora.ox.ac.uk/objects/uuid:1d2e879d-0972-40ee-a931-664f5f043667.

Full text

Abstract:

Various aspects of the precipitation behaviour of calcium phosphate in aqueous media have been investigated using seeded growth in conjuction with constant-volume and constant-composition techniques under different physical and chemical conditions. In each case, precipitation was allowed to proceed for up to seven days. The solid precipitates thus obtained were characterised by means of scanning electron microscopy, powder X-ray diffractometry and wavelength dispersive spectroscopy. During these precipitation experiments, the formation of the thermodynamically most stable and most supersaturat

APA, Harvard, Vancouver, ISO, and other styles

4

Papastavrou, Emmanouil. "Incorporating self-assembly into robocasting for applications in hard tissue engineering." Thesis, Nottingham Trent University, 2016. http://irep.ntu.ac.uk/id/eprint/32067/.

Full text

Abstract:

High cost coupled with limited supply of hard tissue substitutes make necessary the development of synthetic biomaterials, as well as economical and reproducible manufacturing techniques that can be easily scaled up. Multiple and often conflicting requirements have so far impeded the application of polymer/ceramic composites in large load-bearing defects. Although porosity is a crucial biological requirement, it has a detrimental effect on their mechanical performance. This thesis emphasizes upon methods for structuring bioceramic materials at different orders of magnitude - termed structural

APA, Harvard, Vancouver, ISO, and other styles

5

Droesch, Kristen L. "The Development of Gelatin Based Tissue Adhesives for Use in Soft Tissue Biomedical Applications." Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/46204.

Full text

Abstract:

Experiments were performed to characterize the pH, gelation time, diffusion processes, material properties, adhesive properties, and the drying variables on the material and adhesive properties of Gelatin Resorcinol Dialdehyde (GR-DIAL) tissue adhesives by varying formulation. Three adhesive formulations with altered weight content of water and glyoxal (a dialdehyde) were utilized. The adhesive formulations were characterized by pH and gelation time in situ, and absorption/desorption of water in the formed resin. Thermal analysis, mechanical testing, and lap shear adhesive bond testing were

APA, Harvard, Vancouver, ISO, and other styles

6

Neel, Ensanya Ali El-Saed Abou. "Collagen-phosphate glass fibres for biomedical and tissue engineering applications." Thesis, University College London (University of London), 2006. http://discovery.ucl.ac.uk/1444480/.

Full text

Abstract:

The aim of this project was to develop three-dimensional (3-D) constructs of phosphate-based glass fibres (PGF) incorporated dense collagen matrices for biomedical and tissue engineering applications. For this, a novel method of "plastic compression" (PC) was used which rapidly removes fluid from hyper-hydrated collagen gels through the application of unconfined compressive load. The project objectives were: the understanding of structure-property relationship of PGF the understanding of the mechanisms of PC to produce dense collagenous matrices, and the application of PC to produce cellular 3

APA, Harvard, Vancouver, ISO, and other styles

7

Perron, Josee Karine. "Development and characterization of PLGA 8515 scaffold for tissue engineering applications." Thesis, University of Ottawa (Canada), 2006. http://hdl.handle.net/10393/27282.

Full text

Abstract:

This study reports the design, development, and characterization of 85/15 poly (dl-lactide-co-glycolide) acid (PLGA 85/15) scaffolds for tissue engineering applications. In this respect the effects of different processing parameters on the PLGA 85/15 scaffold's physical and mechanical properties were investigated. Porous PLGA 85/15 scaffolds were prepared using a gas foaming/salt leaching technique. The processing parameters under examination included gas saturation pressure, gas saturation time, and NaCl/polymer mass ratio. The physical properties of the scaffold considered were the density,

APA, Harvard, Vancouver, ISO, and other styles

8

Parikh, Soham Dipakbhai. "Carbon Nanotube-Coated Scaffolds for Tissue Engineering Applications." Wright State University / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=wright1622228763428769.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Fullana, Matthew J. "Practical Applications of Collagen-Based Scaffolds for Use in Tissue Engineering and Regeneration." Case Western Reserve University School of Graduate Studies / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=case1413809286.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Cheikh, Al Ghanami Racha. "Novel thermoresponsive particle gels for tissue engineering applications." Thesis, University of Nottingham, 2011. http://eprints.nottingham.ac.uk/12318/.

Full text

Abstract:

Biomaterials play an important role in tissue engineering, where they are used as scaffolds for the 3D culture of cells, to help the generation of neo tissues in-vitro and achieve superior tissue engraftment and regeneration in-vivo. The work presented in this thesis describes how thermoresponsive particle gels, a class of materials not previously investigated for tissue engineering applications, can find important applications in this field. The main gels developed and studied were the aqueous thermoresponsive particle gels prepared from poly(poly(ethylene glycol) methacrylate ethyl ether) (p

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Hard Tissue Biomedical Applications"

1

Ishikawa, Takeshi, and Masayuki Yamamoto. Tissue engineering: Fundamentals, techniques and applications. Nova Science Publisher's, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Okano, Teruo, Raphael M. Ottenbrite, and Kinam Park. Biomedical applications of hydrogels handbook. Springer, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Tissue engineering: Fundamentals and applications. Elsevier Science Ltd., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ikada, Yoshito. Tissue engineering: Fundamentals and applications. Elsevier Science Ltd., 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lemons, JE, ed. Quantitative Characterization and Performance of Porous Implants for Hard Tissue Applications. ASTM International, 1987. http://dx.doi.org/10.1520/stp953-eb.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Macroporous polymers: Production properties and biotechnological/biomedical applications. CRC Press/Taylor & Francis, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Laser-tissue interactions: Fundamentals and applications. 2nd ed. Springer, 2002.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Laser-tissue interactions: Fundamentals and applications. Springer, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Polymers in regenerative medicine: Biomedical applications from nano- to macro-structures. Wiley, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

International Conference on Design of Biomaterials (2006 Indian Institute of Technology Kanpur). Advanced biomaterials fundamentals, processing, and applications. John Wiley & Sons, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Hard Tissue Biomedical Applications"

1

Tahriri, Mohammadreza, Regine Torres, Emelia Karkazis, et al. "Applications of Hard and Soft Tissue Engineering in Dentistry." In Applications of Biomedical Engineering in Dentistry. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-21583-5_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jones, Julian R., and Aldo R. Boccaccini. "Biomedical Applications: Tissue Engineering." In Cellular Ceramics. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527606696.ch5h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Paramonov, Sergey E., and Jeffrey D. Hartgerink. "Nanostructured Collagen Mimics in Tissue Engineering." In Nanofabrication Towards Biomedical Applications. Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527603476.ch4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Thompson, Jefferson, and Rupak Dua. "Chapter 5. Nanogels for Tissue Engineering." In Nanogels for Biomedical Applications. Royal Society of Chemistry, 2017. http://dx.doi.org/10.1039/9781788010481-00077.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jin, Rong, and Pieter J. Dijkstra. "Hydrogels for Tissue Engineering Applications." In Biomedical Applications of Hydrogels Handbook. Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-5919-5_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Chen, Guoping, Naoki Kawazoe, and Yoshihiro Ito. "Photo-Crosslinkable Hydrogels for Tissue Engineering Applications." In Photochemistry for Biomedical Applications. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0152-0_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Tuchin, Valery V., Lihong V. Wang, and Dmitry A. Zimnyakov. "Tissue Structure and Optical Models." In Optical Polarization in Biomedical Applications. Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/978-3-540-45321-5_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Weiss, Pierre, Ahmed Fatimi, Jerome Guicheux, and Claire Vinatier. "Hydrogels for Cartilage Tissue Engineering." In Biomedical Applications of Hydrogels Handbook. Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-5919-5_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Dahman, Yaser. "Applications of Biomaterials in Hard Tissue Replacement." In Biomaterials Science and Technology. CRC Press, 2019. http://dx.doi.org/10.1201/9780429465345-11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

García-Aznar, José Manuel, María José Gómez-Benito, María Ángeles Pérez, and Manuel Doblaré. "Mechanobiological Models for Bone Tissue. Applications to Implant Design." In Biomechanics of Hard Tissues. Wiley-VCH Verlag GmbH & Co. KGaA, 2010. http://dx.doi.org/10.1002/9783527632732.ch4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Hard Tissue Biomedical Applications"

1

Heinrich, A., C. Hagen, A. Vizhanyo, et al. "High power, diode-pumped Er:YAG lasers for soft and hard tissue applications." In European Conference on Biomedical Optics. OSA, 2011. http://dx.doi.org/10.1364/ecbo.2011.80921c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Heinrich, A., C. Hagen, A. Vizhanyo, et al. "High-power, diode-pumped Er:YAG lasers for soft and hard tissue applications." In European Conferences on Biomedical Optics, edited by Ronald Sroka and Lothar D. Lilge. SPIE, 2011. http://dx.doi.org/10.1117/12.888255.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sunaguchi, Naoki, Tetsuya Yuasa, and Masami Ando. "Iterative Reconstruction for X-Ray Dark Field Imaging CT: Artifacts Reduction for Hard and Soft Mixture Tissue." In Biomedical Engineering / Robotics Applications. ACTAPRESS, 2014. http://dx.doi.org/10.2316/p.2014.818-030.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Egan, Paul F. "Design and Biological Simulation of 3D Printed Lattices for Biomedical Applications." In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-98190.

Full text

Abstract:

Abstract There is great potential for using 3D printed designs fabricated via additive manufacturing processes for diverse biomedical applications. 3D printing offers capabilities for customizing designs for each new fabrication that could leverage automated design processes for personalized patient care, but there are challenges in developing accurate and efficient assessment methods. Here, we conduct a sensitivity analysis for a biological growth simulation for evaluating 3D printed lattices for regenerating bone and then use these simulations to identify performance trends. Four design topo

APA, Harvard, Vancouver, ISO, and other styles

5

Giovannini, Marco, Newell Moser, and Kornel Ehmann. "Experimental and Analytical Study of Micro-Serrations on Surgical Blades." In ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48046.

Full text

Abstract:

This paper reports on a study and application of laser ablation for machining of micro-serrations on surgical blades. The proposed concept is inspired by nature and mimics a mosquito’s maxilla, which is characterized by a number of serrations along its edge in order to painlessly penetrate human skin and tissue. The focus of this study is to investigate the maxilla’s penetration mechanisms and its application to commercial surgical blades. The fundamental objective is to understand the friction and cutting behavior between a serrated hard surface and soft materials, as well as to identify serr

APA, Harvard, Vancouver, ISO, and other styles

6

Sandri, Monica, Michele Iafisco, Silvia Panseri, Elisa Savini, and Anna Tampieri. "Fully Biodegradable Magnetic Micro-Nanoparticles: A New Platform for Tissue Regeneration and Theranostic." In ASME 2013 2nd Global Congress on NanoEngineering for Medicine and Biology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/nemb2013-93223.

Full text

Abstract:

Nowadays, magnetic materials are receiving special attention due to their potential applications in different fields and in particular in medicine. Magnetic micro-nano-particles have been progressively employed as support materials for enzyme immobilization, and have been used as drug-delivery vehicles, contrast agents for magnetic resonance imaging as well as heat mediators for hyperthermia-based anti-cancer treatments and many other exciting biomedical applications. Magnetic materials have also attracted a big interest in the field of bone tissue regeneration because it has been demonstrated

APA, Harvard, Vancouver, ISO, and other styles

7

Bentil, Sarah A., Sean MacLean, and Rebecca B. Dupaix. "Viscoelastic Properties of Macaque Neural Tissue at Low Strain Rates." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39071.

Full text

Abstract:

Increased knowledge of the mechanical properties of soft tissue subjected to low strain rates is beneficial to biomedical applications, such as designing bio-compatible implants, developing minimally invasive surgical techniques and surgical simulation devices for training surgeons. Unconfined compression and indentation experiments were conducted to extract macro- and micro-level mechanical properties of Macaque neural tissue. The tissues were placed in physiological saline solution and tested at room temperature within one hour post-sacrifice and three weeks post sacrifice using unconfined c

APA, Harvard, Vancouver, ISO, and other styles

8

Werner, Martin, Mikhail Ivanenko, Daniela Harbecke, Manfred Klasing, Hendrik Steigerwald, and Peter Hering. "CO2 laser milling of hard tissue." In Biomedical Optics (BiOS) 2007, edited by Steven L. Jacques and William P. Roach. SPIE, 2007. http://dx.doi.org/10.1117/12.699055.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Serafetinides, Alexander A., Mersini I. Makropoulou, G. N. Tsikrikas, Emmanuel S. Helidonis, George Kavvalos, and Emil N. Sobol. "Infrared laser ablation of hard tissue." In Europto Biomedical Optics '93, edited by Martin J. C. van Gemert, Rudolf W. Steiner, Lars O. Svaasand, and Hansjoerg Albrecht. SPIE, 1994. http://dx.doi.org/10.1117/12.168052.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Vigliotti, Andrea, and Damiano Pasini. "Structural Optimization of Lattice Materials." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-47390.

Full text

Abstract:

Lattice materials are characterized at the microscopic level by a regular pattern of voids confined by walls. Recent rapid prototyping techniques allow their manufacturing from a wide range of solid materials, ensuring high degrees of accuracy and limited costs. The microstructure of lattice material permits to obtain macroscopic properties and structural performance, such as very high stiffness to weight ratios, highly anisotropy, high specific energy dissipation capability and an extended elastic range, which cannot be attained by uniform materials. Among several applications, lattice materi

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!