Relevant bibliographies by topics / Haynes 230® / Journal articles
To see the other types of publications on this topic, follow the link: Haynes 230®.

Journal articles on the topic 'Haynes 230®'

Author: Grafiati
Published: 4 June 2021
Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Haynes 230®.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

McNeff, Patrick S., and Brian K. Paul. "Electroplasticity effects in Haynes 230." Journal of Alloys and Compounds 829 (July 2020): 154438. http://dx.doi.org/10.1016/j.jallcom.2020.154438.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chien, Fen Ren, and R. Brown. "Cyclic oxidation of Haynes 230 alloy." Journal of Materials Science 27, no. 6 (March 1992): 1514–20. http://dx.doi.org/10.1007/bf00542912.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pop, D., and K. Wolski. "Surface segregation in HAYNES 230 alloy." Applied Surface Science 253, no. 4 (December 2006): 2244–50. http://dx.doi.org/10.1016/j.apsusc.2006.04.026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Adam, Benjamin, Julie Tucker, and Graham Tewksbury. "Hot deformation data for Haynes 214, Haynes 230 and Inconel 740H." Data in Brief 28 (February 2020): 104923. http://dx.doi.org/10.1016/j.dib.2019.104923.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chien, Fen-Ren, and Richard Brown. "Cyclic hot corrosion of Haynes 230 alloy." Journal of Materials Science 27, no. 9 (1992): 2367–76. http://dx.doi.org/10.1007/bf01105045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xia, Tian, Rui Wang, Zhongnan Bi, Rui Wang, Peng Zhang, Guangbao Sun, and Ji Zhang. "Microstructure and Mechanical Properties of Carbides Reinforced Nickel Matrix Alloy Prepared by Selective Laser Melting." Materials 14, no. 17 (August 24, 2021): 4792. http://dx.doi.org/10.3390/ma14174792.

Full text
Abstract:
Selective laser melting was used to prepare the ceramic particles reinforced nickel alloy owing to its high designability, high working flexibility and high efficiency. In this paper, a carbides particles reinforced Haynes 230 alloy was prepared using SLM technology to further strengthen the alloy. Microstructures of the carbide particles reinforced Haynes 230 alloy were investigated using electron microscopy (SEM), electron probe microanalysis (EPMA) and transmission electron microscopy (TEM). Meanwhile, the tensile tests were carried out to determine the strengths of the composite. The results show that the microstructure of the composite consisted of uniformly distributed M23C6 and M6C type carbides and the strengths of the alloy were higher than the matrix alloy Haynes 230. The increased strengths of the carbide reinforced Haynes 230 alloy (room temperature yield strength 113 MPa increased, ~ 33.2%) can be attributed to the synergy strengthening including refined grain strengthening, Orowan strengthening and dislocation strengthening.
APA, Harvard, Vancouver, ISO, and other styles
7

Maldini, Maurizio, Giuliano Angella, and Valentino Lupinc. "Analysis of Creep Curves of Haynes 230 Superalloy." Materials Science Forum 638-642 (January 2010): 2285–90. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.2285.

Full text
Abstract:
The creep behaviour of the solid solution strengthened nickel-based superalloy Haynes 230 has been investigated under constant load and temperature conditions on as received, after conventional solution treatment, and on overaged conditions. The experimental results have shown a very strong dependence of the creep curve shape with the applied stress/temperature: in the tests performed at high stresses/low temperatures, the primary/decelerating stage takes an important portion of the creep curve. At these test conditions, the accelerating creep is mainly caused by the increase of the applied stress with the strain as it happens in constant load creep tests. In the tests performed at low stresses/high temperatures, the primary stage is very small and the following accelerating creep is characterized by different accelerating creep stages. The analysis of the creep curves on the as received and overaged alloys, has shown that a large portion of the accelerating creep at low stresses/high temperatures is caused by microstructural instability.
APA, Harvard, Vancouver, ISO, and other styles
8

Pataky, Garrett J., Huseyin Sehitoglu, and Hans J. Maier. "High temperature fatigue crack growth of Haynes 230." Materials Characterization 75 (January 2013): 69–78. http://dx.doi.org/10.1016/j.matchar.2012.09.012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fahrmann, M. G., and S. K. Srivastava. "Low cycle fatigue behaviour of HAYNES 230 alloy." Materials at High Temperatures 31, no. 3 (July 24, 2014): 221–25. http://dx.doi.org/10.1179/1878641314y.0000000017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rashidi, S., J. P. Choi, J. W. Stevenson, A. Pandey, and R. K. Gupta. "High temperature oxidation behavior of aluminized Haynes 230." Corrosion Science 174 (September 2020): 108835. http://dx.doi.org/10.1016/j.corsci.2020.108835.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Ahmed, Raasheduddin, Paul Ryan Barrett, Mamballykalathil Menon, and Tasnim Hassan. "Thermo-mechanical low-cycle fatigue-creep of Haynes 230." International Journal of Solids and Structures 126-127 (November 2017): 90–104. http://dx.doi.org/10.1016/j.ijsolstr.2017.07.033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Schneider, J. A., D. Williston, T. L. Murphy, C. Varner, J. Hawkins, and B. Walker. "Solid state joining of nickel based alloy, Haynes 230." Journal of Materials Processing Technology 225 (November 2015): 492–99. http://dx.doi.org/10.1016/j.jmatprotec.2015.04.034.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Rozman, K. A., M. A. Carl, M. Kapoor, Ö. N. Doğan, and J. A. Hawk. "Creep performance of transient liquid phase bonded haynes 230 alloy." Materials Science and Engineering: A 768 (December 2019): 138477. http://dx.doi.org/10.1016/j.msea.2019.138477.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Barrett, Paul R., Raasheduddin Ahmed, Mamballykalathil Menon, and Tasnim Hassan. "Isothermal low-cycle fatigue and fatigue-creep of Haynes 230." International Journal of Solids and Structures 88-89 (June 2016): 146–64. http://dx.doi.org/10.1016/j.ijsolstr.2016.03.011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Chan, Kevin J., and Preet M. Singh. "Corrosion Behavior of Pre-Carburized Hastelloy N, Haynes 244, Haynes 230, and Incoloy 800H in Molten FLiNaK." Nuclear Technology 206, no. 11 (October 15, 2020): 1751–68. http://dx.doi.org/10.1080/00295450.2020.1809311.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Luccarelli, P. G., G. J. Pataky, H. Sehitoglu, and S. Foletti. "Finite element simulation of single crystal and polycrystalline Haynes 230 specimens." International Journal of Solids and Structures 115-116 (June 2017): 270–78. http://dx.doi.org/10.1016/j.ijsolstr.2017.03.025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Cheng, Xiu Quan, Ning Yuan Zhu, Qin Xiang Xia, and Gang Feng Xiao. "Establishment of the High Temperature Constitutive Relationship of the Haynes 230 Ni-Based Superalloy." Defect and Diffusion Forum 385 (July 2018): 397–402. http://dx.doi.org/10.4028/www.scientific.net/ddf.385.397.

Full text
Abstract:
The high temperature flow behavior of materials is an important basis to study their formability and to determine reasonable forming process parameters. In this work, the high temperature plane strain compression (HTPSC) tests were employed to reveal the high temperature flow behavior of Haynes 230 Ni-based superalloy under the wide range of temperatures (950°C-1200°C) and strain rates (0.01/s-10/s). The stress-strain data from the tests were applied to model the strain-compensated Arrhenius physically-based constitutive equation and considering the dynamic recovery (DRV) and dynamic recrystallization (DRX) phenomenological constitutive equation. The comparison indicated that the predictions of the two modeled constitutive equations are in good agreement with the experimental data. The prediction of the flow behavior of Haynes 230 Ni-based superalloy of strain-compensated Arrhenius constitutive equation is more accurately (average absolute relative error (AARE) is 2.84%) than that of considering DRV and DRX constitutive equation (AARE is 7.57%).
APA, Harvard, Vancouver, ISO, and other styles
18

Gossé, Stéphane, Thierry Alpettaz, Fabien Rouillard, Sylvie Chatain, Christine Guéneau, and Céline Cabet. "Direct Measurements of the Chromium Activity in Complex Nickel Base Alloys by High Temperature Mass Spectrometry." Materials Science Forum 595-598 (September 2008): 975–85. http://dx.doi.org/10.4028/www.scientific.net/msf.595-598.975.

Full text
Abstract:
Chromium rich, nickel based alloys Haynes 230 and Inconel 617 are candidate materials for the primary circuit and intermediate heat exchangers (IHX) of (Very)-High Temperature Reactors. The corrosion resistance of these alloys is strongly related to the reactivity of chromium in the reactor specific environment (high temperature, impure helium). At intermediate temperature – 900°C for Haynes 230 and 850°C for Inconel 617 – the alloys under investigation are likely to develop a chromium-rich surface oxide scale. This layer protects from the exchanges with the surrounding medium and thus prevents against intensive corrosion processes. However at higher temperatures, it was shown that the surface chromia can be reduced by reaction with the carbon from the alloy [1] and the bare material can quickly corrode. Chromium appears to be a key element in this surface scale reactivity. Then, quantitative assessment of the surface requires an accurate knowledge of the chromium activity in the temperature range close to the operating conditions (T ≈ 1273 K). High temperature mass spectrometry (HTMS) coupled to multiple effusion Knudsen cells was successfully used to measure the chromium activity in Inconel 617 and Haynes 230 in the 1423- 1548 K temperature range. Appropriate adjustments of the experimental parameters and in-situ calibration toward pure chromium allow to reach accuracy better than ± 5%. For both alloys, the chromium activities are determined. Our experimental results on Inconel 617 are in disagreement with the data published by Hilpert [2]. Possible explanations for the significant discrepancy are discussed.
APA, Harvard, Vancouver, ISO, and other styles
19

Yang, Lieh Dai, Wei Liang Ku, Han Ming Chow, Der An Wang, and Yan Cherng Lin. "Mar-M247, Haynes-230 and Inconel-718 Study of Machining Characteristics for Ni-Based Superalloys on Friction Drilling." Advanced Materials Research 459 (January 2012): 632–37. http://dx.doi.org/10.4028/www.scientific.net/amr.459.632.

Full text
Abstract:
One of the difficulties for Ni-based superalloys application is its manufacturability。Traditional manufacturing process can obtain high strength due to the material characteristic with high strength at high temperature, others like low heat conducting coefficient and process hardening, therefore it could be thought of as a difficult processing material, simultaneously, high temperature drilling could also be resulted in tool wear and broken rapidly, and lead to high process cost。 This study used three Ni-based superalloys such as Mar-M247, Haynes-230 and Inconel-718，applying thermal friction drilling to conduct experiments on the CNC machine using spindle speed and feed rate as process parameters employing Taguchi methods to explore the bush length and internal hole of drilled surface roughness。The results showed that it can generate the longest bush length and best surface roughness for Haynes-230；however Inconel-718 has the largest axial force and worse bush length and surface roughness。
APA, Harvard, Vancouver, ISO, and other styles
20

Dongmei, Liu, Hu Rui, Li Jinshan, Liu Yi, Kou Hongchao, and Fu Hengzhi. "Isothermal Oxidation Behavior of Haynes 230 Alloy in Air at 1100 °C." Rare Metal Materials and Engineering 37, no. 9 (September 2008): 1545–48. http://dx.doi.org/10.1016/s1875-5372(09)60040-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Beretta, Stefano, Silvio Rabbolini, and Angelo Di Bello. "Multi-scale crack closure measurements with digital image correlation on Haynes 230." Frattura ed Integrità Strutturale 9, no. 33 (June 19, 2015): 174–82. http://dx.doi.org/10.3221/igf-esis.33.22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Bai, Ching-Yuan, Chun-Hao Koo, and Che-Chung Wang. "Electrical Discharge Surface Alloying of Superalloy Haynes 230 with Aluminum and Molybdenum." MATERIALS TRANSACTIONS 45, no. 9 (2004): 2878–85. http://dx.doi.org/10.2320/matertrans.45.2878.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Gross, D. W., K. Nygren, G. J. Pataky, J. Kacher, H. Sehitoglu, and I. M. Robertson. "The evolved microstructure ahead of an arrested fatigue crack in Haynes 230." Acta Materialia 61, no. 15 (September 2013): 5768–78. http://dx.doi.org/10.1016/j.actamat.2013.06.020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Thakur, Aniruddha, Kenneth S. Vecchio, and Sia Nemat-Nasser. "Bauschinger effect in haynes 230 alloy: Influence of strain rate and temperature." Metallurgical and Materials Transactions A 27, no. 7 (July 1996): 1739–48. http://dx.doi.org/10.1007/bf02651923.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Thongsri, Jatuporn. "Transient Thermal-Electric Simulation and Experiment of Heat Transfer in Welding Tip for Reflow Soldering Process." Mathematical Problems in Engineering 2018 (December 20, 2018): 1–9. http://dx.doi.org/10.1155/2018/4539054.

Full text
Abstract:
Welding tip is an appliance for making footprint to connect the arm and head gimbal assembly (HGA) together in reflow soldering process. The welding tip is made from 3 materials: copper alloy, stainless steel, and haynes 230. It works based on Joule heating effect. The haynes 230 head tip is the area used to create a footprint. In the past, failure in the reflow soldering process of a hard disk drive factory was found resulting in defective products; therefore, a solution to resolve this problem must be researched. This article reports a solution to the aforementioned problem by using transient thermal-electric simulation to investigate the heat transfer in the welding tip and a simple experiment to verify the simulation. By using ANSYS, the simulation results revealed the temperature of welding tip. The maximum temperature was 406°C on the head tip at t=0.7s and then it rapidly decreased. The reflow soldering process failure occurred when footprint was done after 0.7s causing the temperature to be too low for melting the solder so the arm and HGA were unable to connect to each other. We proposed simple solutions and ways to improve the efficacy of the reflow soldering process; e.g., footprints should be done at 0.7s, and the welding tip’s material should be changed from haynes 230 to 556. After the factory implemented our results, the problem could truly be resolved. Not only do products have a higher quality but also miscellaneous expenses from defective products are saved.
APA, Harvard, Vancouver, ISO, and other styles
26

Warmuzek, Małgorzata, Adelajda Polkowska, and Tomasz Paweł Dudziak. "Characteristics of the Evolution of Carbide Morphology in the Haynes® 230® Alloy as a Result of High Temperature Annealing." Journal of Applied Materials Engineering 60, no. 4 (April 12, 2021): 109–19. http://dx.doi.org/10.35995/jame60040009.

Full text
Abstract:
In this work, results of an investigation of the microstructure evolution in Haynes® 230® alloy are presented. The morphological and chemical compositions of the chosen microstructure’s constituents, such as the primary and secondary carbides, were analyzed based on tests in the temperature range 700–800 °C for 1000–3000 h. The prediction of phase evolution within the microstructure was proposed based on the analysis of mutual replacement of carbide-forming elements at the carbide/matrix interface. Based on the results, some complementary markers were considered to describe Haynes® 230® microstructure evolution. Qualitative markers, i.e., defined morphological features, were related to the shape and distribution of microstructure constituents. The study also used quantitative markers related to the local chemical compositions of carbide particles, determined as the ratio of the concentrations of carbide-forming elements Crc/Wc, Crc/CrM and Wc/WM. Microstructure maps created on the basis of these complementary markers for the successive annealing stages reflected the course of its morphological evolution.
APA, Harvard, Vancouver, ISO, and other styles
27

Xu, Xiao, Ze Yu Li, Gang Feng Xiao, and Qin Xiang Xia. "Solution Treatment Process of Haynes 230 Cylindrical Blank Used for Hot Flow Spinning." Defect and Diffusion Forum 385 (July 2018): 373–78. http://dx.doi.org/10.4028/www.scientific.net/ddf.385.373.

Full text
Abstract:
Hot flow spinning is one of the most effective methods to manufacture the cylindrical parts of nickel-based superalloy. However, crack occurs easily in the hot flow spinning process of Haynes230 alloy when the cylindrical blanks are obtained by forging and wire-electrode cutting billet due to the severe segregation of carbides existed in the microstructure of the Haynes230 forging billet. The solution treatment process of Haynes230 blank is put forward to obtain the cylindrical blank with homogeneous and fine grained microstructure used for hot flow spinning. The influence of solution treatment process on the microstructure and hardness of Haynes 230 was investigated; and the relationship between grain size and solution temperature was analyzed. The results show that the grain size of Haynes230 alloy increases with the increasing of solution temperature and the holding time. The abnormal growth of grains occurs under excessively high solution temperature and long holding time. The grain growth activation energy of Haynes230 is about 296.0kJ/mol. The hardness of Haynes230 alloy decreases with the increasing of solution temperature, but negligibly changes with the holding time. The severe segregation of carbides can be eliminated and the cylindrical blank with homogeneous and fine grained microstructure used for hot flow spinning of Haynes230 alloy can be obtained after solution treatment at 1230°C for 60 min heat preservation.
APA, Harvard, Vancouver, ISO, and other styles
28

Jian, Li, Pu Jian, Xiao Jianzhong, and Qian Xiaoliang. "Oxidation of Haynes 230 alloy in reduced temperature solid oxide fuel cell environments." Journal of Power Sources 139, no. 1-2 (January 2005): 182–87. http://dx.doi.org/10.1016/j.jpowsour.2004.07.019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Kim, Donghoon, Injin Sah, Ho Jung Lee, and Changheui Jang. "Hydrogen effects on oxidation behaviors of Haynes 230 in high temperature steam environments." Solid State Ionics 243 (July 2013): 1–7. http://dx.doi.org/10.1016/j.ssi.2013.04.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Pataky, Garrett J., Huseyin Sehitoglu, and Hans J. Maier. "Creep deformation and mechanisms in Haynes 230 at 800°C and 900°C." Journal of Nuclear Materials 443, no. 1-3 (November 2013): 484–90. http://dx.doi.org/10.1016/j.jnucmat.2013.08.009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Mokgalapa, Naphtali M., Tushar K. Ghosh, Robert V. Tompson, and Sudarshan K. Loyalka. "Adhesion Force between a Silver Particle and Haynes 230: Role of Surface Conditions." Nuclear Technology 194, no. 3 (June 2016): 353–68. http://dx.doi.org/10.13182/nt15-106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Boehlert, C. J., and S. C. Longanbach. "A comparison of the microstructure and creep behavior of cold rolled HAYNES® 230 alloy™ and HAYNES® 282 alloy™." Materials Science and Engineering: A 528, no. 15 (June 2011): 4888–98. http://dx.doi.org/10.1016/j.msea.2011.03.019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Haack, M., M. Kuczyk, A. Seidel, E. López, F. Brückner, and C. Leyens. "Investigation on the formation of grain boundary serrations in additively manufactured superalloy Haynes 230." Journal of Laser Applications 32, no. 3 (August 2020): 032014. http://dx.doi.org/10.2351/7.0000112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Luccarelli, Pietro Giovanni, Stefano Foletti, Garrett Pataky, and Huseyin Sehitoglu. "Crystal Plasticity Simulations of Haynes 230, an Analysis of Single Crystal and Polycrystalline Experiments." Solid State Phenomena 258 (December 2016): 294–97. http://dx.doi.org/10.4028/www.scientific.net/ssp.258.294.

Full text
Abstract:
The behavior of a Ni-based superalloy, Haynes 230, was investigated at macro and micro scale level by means of a Crystal Plasticity (CP) model implemented in an open source Finite Element code, Warp3D. Single Crystal and polycrystalline specimens have been experimentally characterized with Digital Image Correlation (DIC) to identify the local strain field evolution. The results of single crystal’s tensile tests were used to obtain an estimation of the constitutive model parameters. Then a polycrystalline model, reproducing a tensile test with loading/unloading steps, was created starting from the microstructural data obtained with EBSD (electron back-scatter diffraction), which allowed the identification of grains geometry and orientations. The polycrystalline simulations were used to verify the prediction of the CP model over the experiment. The results of this study show that the comparison between experiments and numerical analysis is in good agreement on both global and local scale levels.
APA, Harvard, Vancouver, ISO, and other styles
35

Tung, Hsiao-Ming, and James F. Stubbins. "Incipient corrosion behavior of Haynes 230 under a controlled reducing atmosphere at high temperatures." Journal of Nuclear Materials 427, no. 1-3 (August 2012): 389–92. http://dx.doi.org/10.1016/j.jnucmat.2012.05.016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Tung, Hsiao-Ming, Kun Mo, and James F. Stubbins. "Biaxial thermal creep of Inconel 617 and Haynes 230 at 850 and 950°C." Journal of Nuclear Materials 447, no. 1-3 (April 2014): 28–37. http://dx.doi.org/10.1016/j.jnucmat.2013.12.016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Rabbolini, S., G. J. Pataky, H. Sehitoglu, and S. Beretta. "Fatigue crack growth in Haynes 230 single crystals: an analysis with digital image correlation." Fatigue & Fracture of Engineering Materials & Structures 38, no. 5 (December 8, 2014): 583–96. http://dx.doi.org/10.1111/ffe.12261.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Ewest, D., P. Almroth, B. Sjödin, D. Leidermark, and K. Simonsson. "Isothermal and thermomechanical fatigue crack propagation in both virgin and thermally aged Haynes 230." International Journal of Fatigue 120 (March 2019): 96–106. http://dx.doi.org/10.1016/j.ijfatigue.2018.11.004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

D’Souza, Brendan, Weiqian Zhuo, Qiufeng Yang, Amanda Leong, and Jinsuo Zhang. "Impurity driven corrosion behavior of HAYNES® 230® alloy in molten chloride Salt." Corrosion Science 187 (July 2021): 109483. http://dx.doi.org/10.1016/j.corsci.2021.109483.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Lee, S. Y., Y. L. Lu, P. K. Liaw, H. Choo, S. A. Thompson, J. W. Blust, P. F. Browning, A. K. Bhattacharya, J. M. Aurrecoechea, and D. L. Klarstrom. "High-temperature tensile-hold crack-growth behavior of HASTELLOY® X alloy compared to HAYNES® 188 and HAYNES® 230® alloys." Mechanics of Time-Dependent Materials 12, no. 1 (February 16, 2008): 31–44. http://dx.doi.org/10.1007/s11043-008-9049-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Beretta, Stefano, Stefano Foletti, Silvio Rabbolini, and Huseyin Sehitoglu. "Fatigue Crack Propagation in Haynes 230: A Comparison between Single and Polycrystal Crack Closure Levels." Solid State Phenomena 258 (December 2016): 243–48. http://dx.doi.org/10.4028/www.scientific.net/ssp.258.243.

Full text
Abstract:
An experimental campaign was developed to evaluate fatigue crack growth in Haynes 230. The effects of plasticity induced crack closure were investigated with Digital Image Correlation. In particular, crack opening levels were measured with the digital extensometer technique, which allowed the evaluation of crack flanks relative displacements. Experimental results were compared with a reference da/dn – ΔKeff curve and with the data of a previous study, which analyzed single crystal propagation. It was found that the adoption of crack closure local measurements provided an accurate estimation of crack propagation driving forces, since all the experimental points from single crystals and polycrystals collapse onto the da/dn – ΔKeff curve.
APA, Harvard, Vancouver, ISO, and other styles
42

Haack, Maximilian, Martin Kuczyk, André Seidel, Elena López, Frank Brueckner, and Christoph Leyens. "Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy." Materials Characterization 160 (February 2020): 110092. http://dx.doi.org/10.1016/j.matchar.2019.110092.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Wang, Xu, Fan Fan, Jerzy A. Szpunar, and Lina Zhang. "Influence of grain orientation on the incipient oxidation behavior of Haynes 230 at 900 °C." Materials Characterization 107 (September 2015): 33–42. http://dx.doi.org/10.1016/j.matchar.2015.06.029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Jian, Li, Pu Jian, Hua Bing, and Guangyuan Xie. "Oxidation kinetics of Haynes 230 alloy in air at temperatures between 650 and 850°C." Journal of Power Sources 159, no. 1 (September 2006): 641–45. http://dx.doi.org/10.1016/j.jpowsour.2005.09.065.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Maynard, Raymond K., Naphtali M. Mokgalapa, Tushar K. Ghosh, Robert V. Tompson, Dabir S. Viswanath, and Sudarshan K. Loyalka. "Hemispherical Total Emissivity of Potential Structural Materials for Very High Temperature Reactor Systems: Haynes 230." Nuclear Technology 179, no. 3 (September 2012): 429–38. http://dx.doi.org/10.13182/nt11-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Ahmed, Raasheduddin, and Tasnim Hassan. "Constitutive modeling for thermo-mechanical low-cycle fatigue-creep stress–strain responses of Haynes 230." International Journal of Solids and Structures 126-127 (November 2017): 122–39. http://dx.doi.org/10.1016/j.ijsolstr.2017.07.031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Kim, Daejong, Injin Sah, Donghoon Kim, Woo-Seog Ryu, and Changheui Jang. "High Temperature Oxidation Behavior of Alloy 617 and Haynes 230 in Impurity-Controlled Helium Environments." Oxidation of Metals 75, no. 1-2 (December 14, 2010): 103–19. http://dx.doi.org/10.1007/s11085-010-9223-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Mahaffey, Jacob, David Adam, Andrew Brittan, Mark Anderson, and Kumar Sridharan. "Corrosion of Alloy Haynes 230 in High Temperature Supercritical Carbon Dioxide with Oxygen Impurity Additions." Oxidation of Metals 86, no. 5-6 (October 6, 2016): 567–80. http://dx.doi.org/10.1007/s11085-016-9654-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Vecchio, Kenneth S., Michael D. Fitzpatrick, and Dwaine Klarstrom. "Influence of subsolvus thermomechanical processing on the low-cycle fatigue properties of haynes 230 alloy." Metallurgical and Materials Transactions A 26, no. 3 (March 1995): 673–89. http://dx.doi.org/10.1007/bf02663917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Lu, Y. L., L. J. Chen, G. Y. Wang, M. L. Benson, P. K. Liaw, S. A. Thompson, J. W. Blust, et al. "Hold time effects on low cycle fatigue behavior of HAYNES 230® superalloy at high temperatures." Materials Science and Engineering: A 409, no. 1-2 (November 2005): 282–91. http://dx.doi.org/10.1016/j.msea.2005.05.120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography