Log in

Relevant bibliographies by topics / Heat and Temperature Topic / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Heat and Temperature Topic.

Dissertations / Theses on the topic 'Heat and Temperature Topic'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Heat and Temperature Topic.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Storey, Gina Marie. "AN ANALYSIS OF METEOROLOGICAL VARIABILITY ASSOCIATED WITH REGIONAL HEAT-RELATED DEATHS ?A KILLER HOT TOPIC?" MSSTATE, 2003. http://sun.library.msstate.edu/ETD-db/theses/available/etd-04292003-161702/.

Full text

Abstract:

With no universal criteria for classifying a heat-related death, the scope and magnitude of heat-related illnesses and deaths is underestimated. By using threshold temperatures based on one and two standard deviations from normal, a unique but universal classification for excessive/extreme heat was calculated. These threshold values were calculated for St. Louis, Missouri; New Orleans, Louisiana; Little Rock, Arkansas; Philadelphia, Pennsylvania; and Milwaukee, Wisconsin for June, July, and August from 1990 ? 1999. Statistical analysis was performed for each city on days with excessive/extreme

APA, Harvard, Vancouver, ISO, and other styles

2

Mateu, Royo Carlos. "Development of High Temperature Heat Pumps for Industrial Waste Heat Recovery." Doctoral thesis, Universitat Jaume I, 2021. http://dx.doi.org/10.6035/14107.2021.744033.

Full text

Abstract:

One of the major challenges of this decade is developing more sustainable energy systems that contribute to environmental concern, especially climate change mitigation. Extending the operating conditions of the heat pump technology to higher temperatures will allow decarbonising the industrial sector from two slopes: recovering heat from waste heat sources that currently is being rejected to the ambient and produce heat at the required industrial thermal levels that become useful for the industrial processes. Both challenges will make possible reduce the equivalent CO2 emissions of the industr

APA, Harvard, Vancouver, ISO, and other styles

3

Laubscher, Ryno. "Development aspects of a high temperature heat pipe heat exchanger for high temperature gas-cooled nuclear reactor systems." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80096.

Full text

Abstract:

Thesis (MScEng)--Stellenbosch University, 2013.<br>ENGLISH ABSTRACT: High temperature heat sources are becoming an ever-increasing imperative in the process industry for the production of plastics, ammonia and fertilisers, hydrogen, coal-toliquid fuel and process heat. Currently, high temperature reactor (HTR) technology is capable of producing helium temperatures in excess of 950°C; however, at these temperatures, tritium, which is a radioactive contaminant found in the helium coolant stream, is able to diffuse though the steel retaining wall of the helium-to-steam heat exchanger. To ci

APA, Harvard, Vancouver, ISO, and other styles

4

Midtsjø, Alexander. "Power Production from Low Temperature Heat Sources." Thesis, Norwegian University of Science and Technology, Department of Energy and Process Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9902.

Full text

Abstract:

<p>As part of the energy recovery part of the ROMA (Resource Optimization and recovery in the Materials industry) project, a laboratory prototype power production system is being built and completed in 2009. The laboratory prototype is based on a new technology for power production from low to medium temperature heat sources (the off gas from electrolysis cells in the aluminum industry) where CO2 is used as a working medium in a trans-critical Rankine cycle. The laboratory rig consists of the power cycle with a prototype expander as the core unit, an air loop to provide the heat, and an ethyle

APA, Harvard, Vancouver, ISO, and other styles

5

Pfaff, Michael. "Power Production from Low Temperature Heat Sources." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-18330.

Full text

Abstract:

SummaryThis Master Thesis is a conclusion on work done as part of the Resource Optimizationand recovery in the Materials industry project (Roma). This project is involved in thedevelopment of a new technology for power production from low temperature heat sourcesfor off gases from aluminum production cells. The technology is based on an transcriticalRankine cycle with CO2 as a working fluid, as the work recovery circuit. The center ofthe test facility is the expander, a prototype provided by Obrist Engineering . 81 testswere perfomed to investigate the behavoir of the expander cycle. Effect of

APA, Harvard, Vancouver, ISO, and other styles

6

Baker, Karen Irene. "Unsteady surface heat flux and temperature measurements." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-12042009-020124/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chiu, Kwong-Shing Kevin. "Temperature dependent properties and microvoid in thermal lagging /." free to MU campus, to others for purchase, 1999. http://wwwlib.umi.com/cr/mo/fullcit?p9962510.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Wan, Margaret. "Assessment of occupational heat strain." [Tampa, Fla] : University of South Florida, 2006. http://purl.fcla.edu/usf/dc/et/SFE0001661.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Dahn, Douglas Charles. "Low temperature specific heat of LixNbS2 intercalation compounds." Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25563.

Full text

Abstract:

This thesis describes a study of the low temperature specific heat of LiⅹNbS₂, where x is between 0 and 1. Samples were prepared by intercalating lithium into niobium disulfide in electrochemical cells. Structural data obtained by x-ray diffraction are presented. These, together with electrochemical measurements, show that staged phases exist for some values of x. The electronic specific heat of LiⅹNbS₂, is consistent with complete charge transfer from the intercalated lithium to the bands of the NbS2 host. The lattice specific heat also shows large changes as a function of x. A discussion of

APA, Harvard, Vancouver, ISO, and other styles

10

Schaefer, Laura Atkinson. "Heat exchanger mean temperature differences for refrigerant mixtures." Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/18938.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Farrokhpanah, Sonia. "Design of heat integrated low temperature distillation systems." Thesis, University of Manchester, 2009. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:228854.

Full text

Abstract:

This work addresses the challenges in design of heat integrated low-temperature separation processes. A novel, systematic and robust methodology is developed, which contributes to the design practice of heat-integrated separation sequence and the refrigeration system in the context of low-temperature separation processes. Moreover, the methodology exploits the interactions between the separation and refrigeration systems systematically in an integrated design context. The synthesis and optimisation of heat-integrated separation processes is complex due to the large number of design options. In

APA, Harvard, Vancouver, ISO, and other styles

12

Lartz, Douglas John. "Feedforward temperature control using a heat flux microsensor." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-06302009-040309/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Vivian, Jacopo. "Direct Use of Low Temperature Heat in District Heating Networks with Booster Heat Pumps." Doctoral thesis, Università degli studi di Padova, 2018. http://hdl.handle.net/11577/3422669.

Full text

Abstract:

Buildings are responsible for over one third of the energy demand in Europe. Thus, reducing their energy consumption, increasing energy efficiency and integrating low carbon energy sources have become primary goals in the transition towards a sustainable society. District heating and cooling (DHC) systems play a key role to achieve these targets, as they allow any available source of heat to be exploited, including waste heat and renewable heat sources such as geothermal or solar heat. Nowadays, state-of-the-art DH networks have sup-ply temperatures of 70°C in winter and 55°C in summer. Due to

APA, Harvard, Vancouver, ISO, and other styles

14

Morello, Gerry F. "Temperature and heat transfer studies in a water immersion retort." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/28556.

Full text

Abstract:

Temperature and heat transfer studies in a pilot-scale water immersion retort were performed. The temperature study investigated the temperature distribution and stability of the retort during the cook period. The investigation of heat transfer uniformity within the retort was based on heating and cooling parameters calculated from the heat penetration curves of food-simulating teflon transducers. The uniformity of sterilizing conditions within the retort was determined from process lethalities calculated for the transducers. Variable retort operating conditions consisted of two retort tempera

APA, Harvard, Vancouver, ISO, and other styles

15

Armstrong, Karen Anne. "Theoretical bases for a personal heat strain monitor." Access electronically, 2006. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20070315.172135/index.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Deng, Guangnan. "Embedded heat speaders in low temperature cofired ceramic substrates." FIU Digital Commons, 2002. http://digitalcommons.fiu.edu/etd/2770.

Full text

Abstract:

A new heat spreader that operates on a principle similar to heat pipes has been developed in Low Temperature Cofired Ceramic (LTCC) substrate. The heat spreader use sintered metal powder as the wick structure and water as the working fluid. Key topics related to the fabrication of embedded heat spreaders in LTCC substrate were studied. The conventional LTCC procedure has been improved to suit the requirement of heat spreader. A novel sintered porous silver powder has been developed to provide high capillary pressure and permeability for the wick structure. The maximum mass transport rate of th

APA, Harvard, Vancouver, ISO, and other styles

17

Dickson, Catherine. "Heat stress response and inflammation in acute temperature stresses." Thesis, University of Ottawa (Canada), 2008. http://hdl.handle.net/10393/27678.

Full text

Abstract:

Inflammatory factors, both centrally produced and released from adipocytes (fat cells), have been shown to affect metabolism and to contribute to the pathogenesis and development of many chronic diseases such as heart disease, type 2 diabetes and cancer. Inflammatory response has been shown to be affected by environmental stresses such as heat and cold exposure. The aim of this thesis was to study the effects of heat and cold stresses on inflammatory response over the course of 3 experiments which exposed healthy subjects to one of two heat intensities or to cold stress. This thesis is present

APA, Harvard, Vancouver, ISO, and other styles

18

Ploskic, Adnan. "Technical solutions for low-temperature heat emission in buildings." Doctoral thesis, KTH, Strömnings- och klimatteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-133221.

Full text

Abstract:

The European Union is planning to greatly decrease energy consumption during the coming decades. The ultimate goal is to create sustainable communities that are energy neutral. One way of achieving this challenging goal may be to use efficient hydronic (water-based) heating systems supported by heat pumps. The main objective of the research reported in this work was to improve the thermal performance of wall-mounted hydronic space heaters (radiators). By improving the thermal efficiency of the radiators, their operating temperatures can be lowered without decreasing their thermal outputs. This

APA, Harvard, Vancouver, ISO, and other styles

19

Toal, B. R. H. "The application of heat pumps to low temperature drying." Thesis, University of Ulster, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378669.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Shang, Tonghuo. "Influence of inlet temperature distortion on turbine heat transfer." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/47370.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Calmunger, Mattias. "On High-Temperature Behaviours of Heat Resistant Austenitic Alloys." Doctoral thesis, Linköpings universitet, Konstruktionsmaterial, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-122945.

Full text

Abstract:

Advanced heat resistant materials are important to achieve the transition to long term sustainable power generation. The global increase in energy consumption and the global warming from greenhouse gas emissions create the need for more sustainable power generation processes. Biomass-fired power plants with higher efficiency could generate more power but also reduce the emission of greenhouse gases, e.g. CO2. Biomass offers no net contribution of CO2 to the atmosphere. To obtain greater efficiency of power plants, one option is to increase the temperature and the pressure in the boiler section

APA, Harvard, Vancouver, ISO, and other styles

22

Witwicky, Julien. "Heat dissipation due to microvibrations in low temperature experiments." Thesis, KTH, Fysik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-293485.

Full text

Abstract:

Ultra-sensitive photodetectors on-board space missions need very low temperatures to keep a good resolution. Cryo-coolers, such as pulse-tubes, help maintaining these conditions within a cryostat. In return however, they generate micro-vibrations. These micro-vibrations dissipate enough heat to cause temperature fluctuations at the detector's support, thus lowering the detector's resolution. The first objective is to establish a test bench almost from scratch. The test bench includes a dummy representing the detector's support. The next objectives is to verify that we can measure heat dissipat

APA, Harvard, Vancouver, ISO, and other styles

23

Dong, Shenfu. "Interannual variations in upper ocean heat content and heat transport convergence in the western North Atlantic /." Thesis, Connect to this title online; UW restricted, 2004. http://hdl.handle.net/1773/11021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Brown, Paul W. "Heat Units." College of Agriculture and Life Sciences, University of Arizona (Tucson, AZ), 2013. http://hdl.handle.net/10150/299154.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Hosie, Andrew. "Differentiating thermal from non-thermal eccrine sweating during exercise and heat stress." Access electronically, 2002. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20041105.114628/index.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Memon, Rizwan Ahmed. "Statistical analysis of urban heat island and modeling of heat generation within street canyon." Thesis, Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B42664445.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Hunt, Andrew Philip. "Heat strain, hydration status, and symptoms of heat illness in surface mine workers." Thesis, Queensland University of Technology, 2011. https://eprints.qut.edu.au/44039/1/Andrew_Hunt_Thesis.pdf.

Full text

Abstract:

The aim of the research program was to evaluate the heat strain, hydration status, and heat illness symptoms experienced by surface mine workers. An initial investigation involved 91 surface miners completing a heat stress questionnaire; assessing the work environment, hydration practices, and heat illness symptom experience. The key findings included 1) more than 80 % of workers experienced at least one symptom of heat illness over a 12 month period; and 2) the risk of moderate symptoms of heat illness increased with the severity of dehydration. These findings highlight a health and safety co

APA, Harvard, Vancouver, ISO, and other styles

28

Virk, Akashdeep Singh. "Heat Transfer Characterization in Jet Flames Impinging on Flat Plates." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/52985.

Full text

Abstract:

The experimental work involves calculation of radial distribution of heat transfer coefficient at the surface of a flat Aluminium plate being impinged by a turbulent flame jet. Heat transfer coefficient distribution at the surface is computed from the measured heat flux and temperature data using a reference method and a slope method. The heat transfer coefficient (h) has a nearly bell shaped radial distribution at the plate surface for H/d =3.3. The value of h drops by 37 % from r/d =0 to r/d= 2. Upon increasing the axial distance to H/d = 5, the stagnation point h decreased by 15%. Adiabati

APA, Harvard, Vancouver, ISO, and other styles

29

Yıldırım, Eda Didem Özerdem Barış. "A mathematical model of the human thermal system/." [s.l.]: [s.n.], 2005. http://library.iyte.edu.tr/tezler/master/makinamuh/T000421.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Wade, James Matthew. "Calorimetry studies of high temperature superconductors." Thesis, University of Cambridge, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.363078.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Tewkesbury, Heather. "Mathematical modelling of heat transfer in chocolate moulding." Thesis, University of Birmingham, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.340442.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Batmaz, Ediz. "Overall Heat Transfer Coefficients and Axial Temperature Distribution of Fluids in a Triple Tube Heat Exchanger." NCSU, 2003. http://www.lib.ncsu.edu/theses/available/etd-11062003-123823/.

Full text

Abstract:

Computation of overall heat transfer coefficients in a triple tube heat exchanger (TTHE) is complicated when compared to a double tube heat exchanger (DTHE) since the two overall heat transfer coefficients are not independent of each other and must be solved for simultaneously. Previous methods established towards calculation of these parameters either include assumptions that are not valid for all flow conditions and fluid flow rates or use empirical correlations which may cause significant deviations from actual values of these parameters. A more generic technique was developed for calculati

APA, Harvard, Vancouver, ISO, and other styles

33

Al-Waaly, Ahmed. "The effect of heat transfer on temperature measurement and its applications to study microchannel heat sinks." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/6781/.

Full text

Abstract:

Analytical, numerical and experimental analyses have been performed to investigate the effects of thermocouple wire electrical insulation on the temperature measurement of a reference surface. Two diameters of K-type thermocouple, 80μm and 200μm, with different exposed stripped wire lengths (0 mm, 5mm, 10mm, 15mm and 20mm) were used to measure various surface temperatures (4oC, 8oC, 15oC, 25oC and 35oC). Measurements were made when the thermocouple probe is in direct contact with the surface and the wires are extended vertically and exposed to natural convection from outside environment. Exper

APA, Harvard, Vancouver, ISO, and other styles

34

Gonzalez, Luis O. "Analysis of high speed radially rotating high-temperature heat pipes." Honors in the Major Thesis, University of Central Florida, 2007. http://digital.library.ucf.edu/cdm/ref/collection/ETH/id/1030.

Full text

Abstract:

This item is only available in print in the UCF Libraries. If this is your Honors Thesis, you can help us make it available online for use by researchers around the world by following the instructions on the distribution consent form at http://library.ucf.edu/Systems/DigitalInitiatives/DigitalCollections/InternetDistributionConsentAgreementForm.pdf You may also contact the project coordinator, Kerri Bottorff, at kerri.bottorff@ucf.edu for more information.<br>Bachelors<br>Engineering and Computer Science<br>Mechanical Engineering

APA, Harvard, Vancouver, ISO, and other styles

35

Brooks, Paul David Edwards. "The design of moving packed bed high temperature heat exchangers." Thesis, University of the West of England, Bristol, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321834.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Martinez, Kelley Vineyard. "Addressing Heat Energy and Temperature Misconceptions in High School Chemistry." Thesis, California State University, Long Beach, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=10978080.

Full text

Abstract:

<p> The purpose of this study was to identify misconceptions and perceptions of best teaching practices to better bring about conceptual change in thermodynamics, a core idea within the high school physical science Next Generation Science Standards. This study identified student misconceptions related to a thermodynamics unit, focusing on misconceptions related to temperature and energy, temperature and perceptions of hot/cold, and heat capacity. I also sought to identify factors that students and I, separately, identified as affecting their thinking. Data includes a pre-test and a post-test g

APA, Harvard, Vancouver, ISO, and other styles

37

Merkin, Ryan 1974. "The Urban Heat Island's Effect on the diurnal temperature range." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28612.

Full text

Abstract:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Earth, Atmospheric, and Planetary Sciences, 2004.<br>"June 2004."<br>Includes bibliographical references (p. 59-61).<br>(cont.) representing Phoenix and its rural equivalent is presented through a comparison with estimated energy fluxes for Houston, TX.<br>This study has found significant evidence of the Urban Heat Island Effect (UHIE) in Phoenix, AZ using historic and recent (up to 2002) temperature records. First, an explicit indicator of UHIE was identified by the -0.148⁰F per year decrease of the diurnal temperature range (DTR)

APA, Harvard, Vancouver, ISO, and other styles

38

Kirkham, Mark. "High temperature specific heat capacity measurement of Ni2+XMn1-XGa." Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/14416.

Full text

Abstract:

The investigation of Ni2MnGa ferromagnetic shape memory alloys relies on accurate and complete phase diagrams for the various phase transitions these materials exhibit. However, very little work has been performed to investigate the high temperature order/disorder phase transitions. This project tries to fill some of the gap in the phase diagram through a systemic composition based investigation of Ni2-XMn1+XGa (X=-0.2, 0.0, 0.2, 0.8 and 1.0) using high temperature specific heat measurements. The work has produced a phase diagram in the composition range measured and demonstrated that the orde

APA, Harvard, Vancouver, ISO, and other styles

39

Pullins, Clayton Anthony. "High Temperature Heat Flux Measurement: Sensor Design, Calibration, and Applications." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/27789.

Full text

Abstract:

This effort is focused on the design, calibration, and implementation of a high temperature heat flux sensor for thermal systems research and testing. The High Temperature Heat Flux Sensor (HTHFS) was designed to survive in the harsh thermal environments typically encountered in hypersonic flight, combustion and propulsion research, and large-scale fire testing. The sensor is capable of continuous use at temperatures up to 1000 â ¦C. Two methods for steady-state calibration of the HTHFS at elevated temperatures have been developed as a result of this research. The first method employs a water-

APA, Harvard, Vancouver, ISO, and other styles

40

Coyle, Carolyn Patricia. "Advancing radiative heat transfer modeling in high-temperature liquid-salts." Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/129113.

Full text

Abstract:

Thesis: Ph. D., Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, September, 2020<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 125-133).<br>Nuclear and solar-thermal communities are investigating the use of high Prandtl number liquid-salts in energy generation systems, including fluoride salt-cooled high-temperature reactors (FHRs), molten salt reactors (MSRs), fusion devices, and concentrated solar power plants. The temperature distribution in the coolant salts can be affected by participating medi

APA, Harvard, Vancouver, ISO, and other styles

41

Shi, Meixuan. "Heat transport of a temperature filament in a magnetized plasma." Diss., Restricted to subscribing institutions, 2009. http://proquest.umi.com/pqdweb?did=1779835881&sid=1&Fmt=2&clientId=1564&RQT=309&VName=PQD.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Raphael-Mabel, Sujay Anand. "Design and Calibration of a Novel High Temperature Heat Flux Sensor." Thesis, Virginia Tech, 2005. http://hdl.handle.net/10919/31688.

Full text

Abstract:

Heat flux gages are important in applications where measurement of the transfer of energy is more important than measurement of the temperature itself. There is a need for a heat flux sensor that can perform reliably for long periods of time in high temperature and high heat flux environment. The primary objective is to design and build a heat flux sensor that is capable of operating for extended periods of time in a high heat flux and high temperature environment. A High Temperature Heat Flux Sensor (HTHFS) was made by connecting 10 brass and steel thermocouple junctions in a thermopile cir

APA, Harvard, Vancouver, ISO, and other styles

43

Banim, Robert Seamus. "Improved temperature sensors for the process industry." Thesis, University of Bristol, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245572.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Ullah, Smi. "The influence of AB genome variation on the high-temperature tolerance of wheat." Thesis, The University of Sydney, 2018. http://hdl.handle.net/2123/18148.

Full text

Abstract:

Heat stress is a major constraint to wheat yield in many wheat growing regions including Australia. This study examined potential new genetic diversity for heat tolerance from emmer wheat introgressed into hexaploid bread wheat. A total of 554 genotypes (537 emmer based hexaploid lines and 17 commercial cultivars and/or parents) were evaluated at two times of sowing in 2014, 2015 and 2016. Many of the field selected emmer derived lines had stable yield across environments. The impact of high temperature was greatest at anthesis and grain yield was reduced by between 4 and 7% with every 1oC ris

APA, Harvard, Vancouver, ISO, and other styles

45

Schneider, Alex Joseph. "Computational Modeling of Total Temperature Probes." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/51550.

Full text

Abstract:

A study is presented to explore the suitability of CFD as a tool in the design and analysis of total temperature probes. Simulations were completed using 2D axisymmetric and 3D geometry of stagnation total temperature probes using ANSYS Fluent. The geometric effects explored include comparisons of shielded and unshielded probes, the effect of leading edge curvature on near-field flow, and the influence of freestream Mach number and pressure on probe performance. Data were compared to experimental results from the literature, with freestream conditions of M=0.3-0.9, p_t=0.2-1 atm, T_t=300-11

APA, Harvard, Vancouver, ISO, and other styles

46

Palic, D., FK Siebrits, and SE Coetzee. "Determining the optimum temperature for dry extrusion of full-fat soyabeans." South African Journal of Animal Science, 2009. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1001678.

Full text

Abstract:

Abstract Full-fat soyabeans (FFSB) intended for use in monogastric nutrition need to undergo heat treatment so that present anti-nutritional factors can be inactivated. Under- or over-treatment will decrease the level of amino acids available to the animal. In this study, the slope-ratio technique was used in two trials with broilers for determining the optimum treatment temperature for soyabeans. Average daily weight gain (ADWG) and feed conversion efficiency (FCE) were used as response parameters. The optimum temperature for dry extrusion of FFSB was 144 °C for Trial 1 and 138 °C for Trial 2

APA, Harvard, Vancouver, ISO, and other styles

47

Karadag, Rukiye. "Temperature Distribution In Power Transformers." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12615162/index.pdf.

Full text

Abstract:

As in all other electrical equipments it is essential to estimate the temperature distribution in transformer components in the design stage and during the operation since temperatures above thermal limits of these components might seriously damage them. Thermal models are used to predict this vital information prior to actual operations. In this study, a three dimensional model based on the Finite Element Method (FEM) is proposed to estimate the temperature distribution in the three phase, SF6 gas insulated-cooled power transformer. This model can predict the temperature distribution at the s

APA, Harvard, Vancouver, ISO, and other styles

48

Box, Stephanie Dawn. "AVERAGE DAILY TEMPERATURE AND SIMPLE AND AGGRAVATED ASSAULTS IN CHARLOTTE-MECKLENBERG COUNTY, NORTH CAROLINA." OpenSIUC, 2016. https://opensiuc.lib.siu.edu/theses/2033.

Full text

Abstract:

The temperature-aggression hypothesis, negative affect escape hypothesis, and routine activities theory all contribute to understanding the relationship between temperature, aggression, and crime. Utilizing discussions from all three theories to develop the methodology to best answer questions about the interplay among temperature, aggression, and crime. This study evaluates the relationship between simple assaults and temperature and aggravated assaults and temperature. Using data from Charlotte-Mecklenburg county from 2006-2012, a multiple linear regression was run to determine these diffe

APA, Harvard, Vancouver, ISO, and other styles

49

Anderson, Christopher Allan John. "Repeated exercise in heat and exertional alterations to thermoregulation (REHEAT)." Thesis, Queensland University of Technology, 2020. https://eprints.qut.edu.au/135793/2/Christopher_Anderson_Thesis.pdf.

Full text

Abstract:

This thesis is an investigation into the effects of repeated bouts of exercise and rest on core temperature responses between men and women, following current Australian Army work guidelines. The findings of this thesis suggest that the current guidelines appropriately protect both men and women working in the heat and may inform Australian Army decision making regarding appropriate durations for up to four repeated bouts of work and rest when working in extreme heat.

APA, Harvard, Vancouver, ISO, and other styles

50

Linjewile, Temi Makecha. "Temperature of burning carbonaceous particles in a fluidized-bed combustor /." Title page, contents and abstract only, 1993. http://web4.library.adelaide.edu.au/theses/09PH/09phl756.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!