Books on the topic 'Heat exchangers – Design and construction – Testing'

Joint Power Generation Conference (1989 Dallas, Tex.). Improved performance of heat exchanger systems through design, condition management, and auxiliary interaction: Presented at the 1989 Joint Power Generation Conference, Dallas, Texas, October 22-26, 1989. New York, N.Y: American Society of Mechanical Engineers, 1989.

Saunders, E. A. D. Heat exchangers: Selection, design & construction. Harlow, Essex, England: Longman Scientific & Technical, 1988.

Heat exchanger design. 2nd ed. New York: Wiley, 1989.

Shah, R. K. Fundamentals of heat exchanger design. Hoboken, NJ: John Wiley & Sons, 2003.

P, Sekulić Dušan, ed. Fundamentals of heat exchanger design. Hoboken, N.J: John Wiley & Sons, 2003.

Practical thermal design of air-cooled heat exchangers. New York: Begell House, 2007.

Heat exchanger design handbook. New York: Marcel Dekker, 2000.

Practical thermodynamic tools for heat exchanger design engineers. New York: Wiley, 1987.

Dzi︠u︡benko, B. V. Modeling and design of twisted tube heat exchangers. New York: Begell House Publishers, 2000.

H, Krips, ed. Heat exchangers: A practical approach to mechanical construction, design, and calculations. New York: Begell House, 1998.

Pressure Vessels and Piping Conference (2010 Bellevue, Wash.). Proceedings of the ASME Pressure Vessels and Piping Conference--2010: Presented at ASME 2010 Pressure Vessels and Piping Conference/K-PVP Conference, July 18-22, 2010, Bellevue, Washington, USA. New York: American Society of Mechanical Engineers, 2010.

Czech Republic) Pressure Vessels and Piping Conference (2009 Prague. Proceedings of the ASME Pressure Vessels and Piping Conference--2009: Presented at 2009 ASME Pressure Vessels and Piping Conference, July 26-30, 2009, Prague, Czech Republic. New York, N.Y: American Society of Mechanical Engineers, 2010.

Md.) Pressure Vessels and Piping Conference (2011 Baltimore. Proceedings of the ASME Pressure Vessels and Piping Conference--2011: Presented at ASME 2011 Pressure Vessels and Piping Conference, July 17-21, 2011, Baltimore, Maryland, USA. New York, N.Y: American Society of Mechanical Engineers, 2012.

Heat exchanger network synthesis: Process optimization by energy and resource analysis. Houston: Gulf Pub., 1995.

Smith, Eric M. Advances in thermal design of heat exchangers: A numerical approach : direct-sizing, step-wise rating, and transients. Chichester: Wiley, 2005.

Thermal design of heat exchangers: A numerical approach--direct sizing and stepwise rating. Chichester: Wiley, 1997.

olga, Arsenyeva, Kapustenko Petro, and Tovazhnyanskyy Leonid, eds. Compact heat exchangers for transfer intensification: Low grade heat and fouling mitigation. Boca Raton: Taylor & Francis, 2016.

Design of fluid thermal systems. Boston: PWS-Kent Pub. Co., 1993.

Janna, William S. Design of fluid thermal systems. 2nd ed. Boston: PWS Pub. Co., 1998.

Foumeny, E. A. Heat exchange engineering. New York: Ellis Horwood, 1991.

American Society of Mechanical Engineers. Winter Meeting. Advances in heat exchanger design: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, December 7-12, 1986. New York, N.Y. (345 E. 47th St., New York 10017): ASME, 1986.

Pressure Vessels and Piping Conference (2005 Denver, Colo.). Proceedings of the ASME Pressure Vessels and Piping Conference--2005: Presented at 2005 ASME Pressure Vessels and Piping Conference : July 17-21, 2005, Denver, Colorado, USA. New York, N.Y: ASME, 2005.

Pressure Vessels and Piping Conference (2006 Vancouver, B.C.). Proceedings of the ASME Pressure Vessels and Piping Conference--2006: Presented at 2006 ASME Pressure Vessels and Piping Conference : July 23-27, 2006, Vancouver, BC, Canada. New York, N.Y: ASME, 2007.

Pressure Vessels and Piping Conference (2006 Vancouver, B.C.). Proceedings of the ASME Pressure Vessels and Piping Conference--2006: Presented at 2006 ASME Pressure Vessels and Piping Conference, July 23-27, 2006, Vancouver, BC, Canada. New York: American Society of Mechanical Engineers, 2007.

Pressure Vessels and Piping Conference (2007 San Antonio, Tex.). Proceedings of the ASME Pressure Vessels and Piping Conference--2007: Presented at 2007 ASME Pressure Vessels and Piping Conference, July 22-26, 2007, San Antonio, Texas, USA. Edited by Hasegawa K, Scarth Douglas A, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and International Conference on Creep and Fatigue at Elevated Temperatures (8th : 2007 : San Antonio, Tex.). New York, N.Y: American Society of Mechanical Engineers, 2008.

Pressure Vessels and Piping Conference (2008 Chicago, Ill.). Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

Pressure Vessels and Piping Conference (2008 Chicago, Ill.). Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

Pressure, Vessels and Piping Conference (2008 Chicago Ill ). Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

American Society of Mechanical Engineers. Pressure Vessels and Piping Division., ed. Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

Pressure Vessels and Piping Conference (2002 Vancouver, British Columbia). Design and analysis of piping, vessels, and components--2002: Presented at the 2002 ASME Pressure Vessels and Piping Conference : Vancouver, British Columbia, Canada, August 5-9, 2002. Edited by Dermenjian Artin A, McCabe James F, and American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York: American Society of Mechanical Engineers, 2002.

ASME Pressure Vessels and Piping Conference (2003 Cleveland, Ohio). Design and analysis of pressure vessels and piping: Implemntation of ASME B31, fatigue, ASME Section VIII, and buckling analyses : presented at the 2003 ASME Pressure Vessels and Piping Conference : Cleveland, Ohio, July 20-24, 2003. Edited by Williams Dennis K, McCabe James F, Moinereau Dominique, and American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York, N.Y: American Society of Mechanical Engineers, 2003.

Pressure, Vessels and Piping Conference (2001 Atlanta Ga ). Pressure vessel and piping design and analysis, 2001: Presented at the 2001 ASME Pressure Vessels and Piping Conference, Atlanta, Georgia, July 22-26, 2001. New York, N.Y: American Society of Mechanical Engineers, 2001.

Nauman, E. B. Chemical reactor design, optimization, and scaleup. 2nd ed. Hoboken, N.J: Wiley, 2008.

Chemical reactor design, optimization, and scaleup. New York: McGraw-Hill, 2002.

Angelino, G. Design, construction and testing of a hermetically sealed 100 kw Organic Rankine Cycle engine formedium temperature (200-400°c) heat recovery. Luxembourg: Commission of the European Communities, 1986.

Improved performance of heat exchanger systems through design, condition management, and auxiliary interaction: Presented at the 1989 Joint Power Generation ... Dallas, Texas, October 22-26, 1989 (PWR). American Society of Mechanical Engineers, 1989.

Stewart, Maurice. Surface Production Operations : Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks: A Practical Guide to Design, Construction, Inspection, and Testing. Elsevier Science & Technology Books, 2021.

K, Shah R., Subbarao E. C. 1928-, Mashelkar R. A, and Advanced Study Institute on Heat Transfer Equipment (1986 : Poona, India), eds. Heat transfer equipment design. New York: Hemisphere Pub. Corp., 1988.

Saunders, Elizabeth A. Heat Exchangers: Selection, Design and Construction (Designing for Heat Transfer). Halsted Pr, 1989.

Shah, Ramesh K., and Dusan P. Sekulic. Fundamentals of Heat Exchanger Design. Wiley, 2002.

(Editor), R. M. Manglik, ed. Plate Heat Exchangers: Design, Applications and Performance. WIT Press, 2007.

1915-, McKetta John J., ed. Heat transfer design methods. New York: M. Dekker, 1992.

F, Hewitt G., ed. Hemisphere handbook of heat exchanger design. New York: Hemisphere Pub. Corp., 1990.

F, Hewitt G., ed. Heat exchanger design handbook 2008. New York: Begell house, 2008.

F, Hewitt G., ed. Heat exchanger design handbook, 1998. New York: Begell House, 1998.

1926-, Ievlev V. M., Irvine Thomas F, Danilov I͡U︡ I, and Zharkova E. A, eds. Analysis and design of swirl-augmented heat exchangers. New York: Hemisphere Pub. Corp., 1990.

Ranasinghe, Jatila. Use of the exergy concept for design improvement of heat exchangers and heat exchanger networks. 1989.

F, Hewitt G., ed. HEDH: Heat exchanger design handbook 2002. New York: Begell House, 2002.

Dzyubenko, B. V., L. V. A. Ashmantas, and M. D. Segal. Modeling and Design of Twisted Tube Heat Exchangers. Begell House Publishers, 1999.

Hewitt, Jeffrey. Heat Exchanger Design Handbook (Volumes 1-3). Begell House, 1998.