Relevant bibliographies by topics / Heat treatment method

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Heat treatment method'

Author: Grafiati
Published: 5 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Heat treatment method.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Heat treatment method"

1

Vorob'ev, Aleksandr, Andrey Krutko, and Artem Badamshin. "Modeling of Heat Treatment Processes in QFORM Heat Treatment Module." Proceedings of Petersburg Transport University 19, no. 4 (2022): 727–35. http://dx.doi.org/10.20295/1815-588x-2022-4-727-735.

Full text
Abstract:
Purpose: To review algorithm methodology for the addition of a new material to Qform Heat Treatment Module database with further adequacy assessment of the model by the method of the comparison its microhardness distribution with experimental data. Methods: Technique for the modeling of heat treatment (hardening) of samples from steels 60 and 40Cr in QFORM Heat Treatment software module has been developed. Algorithm for new material addition into software package database with adequacy further assessment for built model by the method of comparison of obtained data on distribution of microhardn
APA, Harvard, Vancouver, ISO, and other styles
2

Mammadova, H.N. "RESEARCHES ON REMOVAL OF TURBIDITY FROM TABLE WINES USING PHYSICAL METHODS." Annali d'Italia 31 (May 23, 2022): 4–6. https://doi.org/10.5281/zenodo.6573181.

Full text
Abstract:
The article includes information on the criteria preventing clarity, which is considered one of the quality indicators of wines, reasons of turbidity, their classification groups and physical treatment methods implemented for turbidity removal. The research helped to discover that implementation of phosphorus and potassium fertilizers without any grounded limitation, increases amount of phosphate ions, potassium, and calcium cations, which are known as the sources of turbidity (metal, crystals, colloids). Results relating to the solutions for the issues as changes, occurred after treatment of
APA, Harvard, Vancouver, ISO, and other styles
3

Šarić, G., K. Marković, D. Vukičević, E. Lež, M. Hruškar, and N. Vahčić. "Changes of antioxidant activity in honey after heat treatment." Czech Journal of Food Sciences 31, No. 6 (2013): 601–6. http://dx.doi.org/10.17221/509/2012-cjfs.

Full text
Abstract:
We determined how the antioxidant activity and total phenolic content of honey changed after being subjected to a high temperature. Antioxidant activity was determined using two methods – FRAP (ferric reducing antioxidant power) and DPPH (1,1-diphenyl-2-picrylhydrazyl) assays. Total phenolic content was determined by modified Folin-Ciocalteu method. The research was conducted on 31 samples of acacia honey and 8 samples of chestnut honey. All measurements were done at two temperatures – at 23°C (room temperature) and after 5 min of heating at 95°C. The obtain
APA, Harvard, Vancouver, ISO, and other styles
4

Zezikov, V. M. "A method of heat treatment using the heat of rolling." Metallurgist 39, no. 4 (1995): 74. http://dx.doi.org/10.1007/bf00740270.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chang, Chin Chun, Ji-Gang Yang, Chi Ling, and Chang Pin Chou. "Optimization of Heat Treatment Parameters with the Taguchi Method for the A7050 Aluminum Alloy." International Journal of Engineering and Technology 2, no. 3 (2010): 269–72. http://dx.doi.org/10.7763/ijet.2010.v2.132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aizawa, Tsutomu. "On the special heat treatment (HIT) method." DENKI-SEIKO[ELECTRIC FURNACE STEEL] 57, no. 3 (1986): 214–21. http://dx.doi.org/10.4262/denkiseiko.57.214.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tani, Yasuhiro, Tae Won Kim, Junji Murata, Yu Zhang, Sho Sawayama, and Kousuke Tsutanaka. "On-Machine Method to Condition the Grinding Ability of Resin-Bond Wheels." Advanced Materials Research 126-128 (August 2010): 159–64. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.159.

Full text
Abstract:
To reduce costs in the manufacturing and usage of grinding wheels, we investigate several methods of adjusting the sharpness of grinding wheels that involve heat treatment and irradiation by ultraviolet (UV) light. We confirm that heat treatment in a furnace of phenol-resin grinding wheels for aluminium leads to improved grinding ability of the wheels for stainless steel and also prevents swarf loading. Next, we clarify that treating the surface of grinding wheels by UV irradiation and heat blowing has a similar effect as heat treatment in a furnace. These treatments reduce the force ratio in
APA, Harvard, Vancouver, ISO, and other styles
8

Xiao, Xin Hua, Xiao Feng Yang, Hong Bin Yu, and Jun Qiang Peng. "Centralized Monitoring Method for Isomeric Heat Treatment Equipments." Advanced Materials Research 819 (September 2013): 144–49. http://dx.doi.org/10.4028/www.scientific.net/amr.819.144.

Full text
Abstract:
Heat treatment equipment are usually harmful to people, they need to be monitored remotely. As the fact that different types of equipment are used in factories, which leads to the problem that monitoring equipment is difficult. Therefore, research on remote centralized temperature monitoring system is necessary. The concept of isomeric equipment is proposed. The framework of monitoring system is established, which is constituted of temperature control instruments, monitoring server and clients. The functions of monitoring system are described, such as setting temperature, receiving temperature
APA, Harvard, Vancouver, ISO, and other styles
9

Xiao, Xin Hua, Xiao Feng Yang, Hong Bin Yu, and Jun Qiang Peng. "Centralized Monitoring Method for Isomeric Heat Treatment Equipments." Key Engineering Materials 584 (September 2013): 81–86. http://dx.doi.org/10.4028/www.scientific.net/kem.584.81.

Full text
Abstract:
Heat treatment equipment are usually harmful to people, they need to be monitored remotely. As the fact that different types of equipment are used in factories, which leads to the problem that monitoring equipment is difficult. Therefore, research on remote centralized temperature monitoring system is necessary. The concept of isomeric equipment is proposed. The framework of monitoring system is established, which is constituted of temperature control instruments, monitoring server and clients. The functions of monitoring system are described, such as setting temperature, receiving temperature
APA, Harvard, Vancouver, ISO, and other styles
10

Birlouez-Aragon, Inés, Pascal Sabat, and Nicolas Gouti. "A new method for discriminating milk heat treatment." International Dairy Journal 12, no. 1 (2002): 59–67. http://dx.doi.org/10.1016/s0958-6946(01)00131-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Heat treatment method"

1

Gibson, Myles. "The Heat Treatment of Nickel Titanium - An investigation Using Taguchi's Method of Optimisation." Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-28769.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sarikaya, Onur Turgay. "Analysis Of Heat Treatment Effect On Springback In V-bending." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12610182/index.pdf.

Full text
Abstract:
Aluminum based alloys have wide area of usage in automotive and defense industry and bending processes are frequently applied during production. One of the most important design criteria of bending processes is springback, which can be basically defined as elastic recovery of the part during unloading. To overcome this problem, heat treatment is generally applied to the workpiece material to refine tensile properties. In this study, the effect of heat treatment on springback characteristics of aluminum studied both numerically by using finite element analysis and experimentally. For this purp
APA, Harvard, Vancouver, ISO, and other styles
3

Chaieb, A., N. Bourbia, R. Bacha, S. Boukrouh, and A. Chari. "CuO Elaboration and Studies of the Influence of Heat Treatment on the Structural Properties." Thesis, Sumy State University, 2015. http://essuir.sumdu.edu.ua/handle/123456789/42637.

Full text
Abstract:
In the present work we synthesize nano powders of CuO by precipitation method, using CuCl2 as precursor. The obtained powder has undergone a heat treatment annealing 100°C, and 450°C. Structural analysis by X-Ray diffraction, Fourier transform infrared (FTIR) microscopy and scanning electron microscopy (SEM) reveal that CuO nano particles are in nano graphs forms and with improved crystallization at 450°C, annealing temperature as monoclinic crystal lattice structure. The radius of NCs calculated by the Scherrer formula is 12.31 nm.
APA, Harvard, Vancouver, ISO, and other styles
4

Warke, Virendra S. "Predicting the response of powder metallurgy steel components to heat treatment." Worcester, Mass. : Worcester Polytechnic Institute, 2008. http://www.wpi.edu/Pubs/ETD/Available/etd-072808-100705/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kuniyoshi, Minoru. "Studies on phenyl-modified polysiloxane low-melting glass : preparation through sol concentration method and rapid heat treatment." 京都大学 (Kyoto University), 2006. http://hdl.handle.net/2433/136322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Black, Shona D. "A method of measuring the thermal diffusivity of poor conductors and its application to the heat treatment of potatoes." Thesis, University of Aberdeen, 1991. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU548102.

Full text
Abstract:
An apparatus and technique based on Angstrom's method is developed for measuring the thermal diffusivity of fruits and vegetables. The reproducibility of the results is found to be satisfactory with typical standard deviations of less than 6&'37. A detailed error analysis reveals that the accuracy of the technique is 7.1&'37. However, on checking the system with materials of known thermal diffusivities there was found to be a systematic error of the order of a factor of 2. A number of possible reasons for this are discussed. A method is outlined for predicting the optimum heat treatment parame
APA, Harvard, Vancouver, ISO, and other styles
7

Schoonwinkel, Susanna. "Factors affecting mothers' choice of infant feeding method / S. Schoonwinkel." Thesis, North-West University, 2008. http://hdl.handle.net/10394/4516.

Full text
Abstract:
The benefits of breastfeeding are well known. It has been shown that HIV is transmitted through breast milk. The HIV epidemic is threatening exclusive breastfeeding in South Africa. It is important that mothers make the right infant feeding choice. There are three basic infant feeding methods available for HIV infected mothers namely; breastfeeding, replacement feeding or formula feeding and heat treatment of breast milk. There are many risk factors for the transmission of HIV through breast milk. Exclusive breastfeeding may reduce the risk of mother-to-child-transmission, compared with mixed
APA, Harvard, Vancouver, ISO, and other styles
8

Claesson, Erik. "Development of a heat treatment method to form a duplex microstructure of lower bainite and martensite in AISI 4140 stee." Thesis, KTH, Materialvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-165084.

Full text
Abstract:
Research on bainite and martensite structures has indicated that lower bainite needles have a refining effect on the lath martensitic structure. Lower bainte needles partitions prior austenite grains and will consequently have a refining effect on the subsequent formed lath martensite. Smaller austenite grains will result in smaller lath martensitic packets and blocks and will result in enhanced mechanical properties.   In order to create a variation of lower bainte structure in a matrix of martensite, two different heat treating methods were tested. The work was focused towards the formation
APA, Harvard, Vancouver, ISO, and other styles
9

Enerstam, Max. "Färgförändring av trä." Thesis, Mittuniversitetet, Avdelningen för design, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-31887.

Full text
Abstract:
Denna uppsats beskriver sökandet efter en metod för att genomfärga trä utan att tillföra pigment. Ett test av fördjupad ammoniakrökning beskrivs i uppsatsen. Ammoniakrökning är en förenklad variation av kembetsning där virke med höga halter garvsyra utsätts för ammoniakånga. Detta gör virkets kulör betydligt mörkare. I detta test värms virket innan ammoniakångan tillförs för att se om det är möjligt med en mer djupgående kulörförändring. Två olika metoder för att hetta upp trävirke kommer att beskrivas, eftersom en ändrad kulör är en av de egenskapsförändringar som följer dessa metoder besluta
APA, Harvard, Vancouver, ISO, and other styles
10

Bäckström, Louise. "In Situ Heating During XRD Measurements as a Method to Study Recrystallisation of Aluminium Alloy AA3003." Thesis, Linköpings universitet, Institutionen för fysik, kemi och biologi, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-150092.

Full text
Abstract:
Recrystallisation is an important topic in the metal industry since the process may drastically alter the properties of the materials subjected to it. By controlling the recrystallisation process, the material properties can be adjusted as desired, which could lead to stronger materials and hence lighter constructions, decreasing our material consumption. This is currently regulated using softening curves complied from tensile tests, a method which does not show the degree of recrystallisation of a metal. This thesis work therefore explores the possibility to characterise the recrystallisation
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Heat treatment method"

1

Compton, E. Conrad. Evaluation of a standard test method for total hemispherical emittance of surfaces from 293 K to 1673 K. National Aeronautics and Space Administration, Langley Research Center, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

S, Nishikawa, and United States. National Aeronautics and Space Administration., eds. A study on the precipitation and reversion behaviors of Cu-0.3% Cr alloy by the step annealing method. National Aeronautics and Space Administration, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tikhonov, A. N. Matematicheskoe modelirovanie tekhnologicheskikh prot͡s︡essov i metod obratnykh zadach v mashinostroenii. "Mashinostroenie", 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

IDF Symposium (1995 Vienna, Austria). Heat treatments & alternative methods: Proceedings of the IDF Symposium held in Vienna, Austria, 6-8 September 1995. International Dairy Federation, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sigg, Daniel C. Cardiac electrophysiology methods and models. Springer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

FRCP, Jackson Graham, ed. Difficult cardiology III. M. Dunitz, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

J, White Christopher, and Ramee Stephen R, eds. Interventional cardiology: New techniques and strategies for diagnosis and treatment. M. Dekker, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

K, Lalwani Anil, ed. Current diagnosis & treatment in otolaryngology: Head & neck surgery. 2nd ed. Lange Medical Books/McGraw Hill, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

R, Holmes David, and Vlietstra Ronald E. 1945-, eds. Interventional cardiology. F.A. Davis Co., 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

T, Sie Hauw, ed. Manual of surgical treatment of atrial fibrillation. Blackwell Futura, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Heat treatment method"

1

Shang, De-Yi. "New Method for Treatment of Variable Physical Properties." In Heat and Mass Transfer. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28983-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kavitha, T. R., C. Suneetha, and T. R. Sunitha. "Heat-Treatment Method for Isolation of Bacillus spp. from Plant Tissues." In Springer Protocols Handbooks. Springer US, 2022. http://dx.doi.org/10.1007/978-1-0716-2827-0_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kupczyk, Maciej Jan, Andrzej Michalski, Piotr Siwak, and Marcin Rosinski. "Evaluation of Cutting Edges Made of Nanocrystalline Cemented Carbides Sintered by the Pulse Plasma Method." In 18th International Federation for Heat Treatment and Surface Engineering. ASTM International, 2011. http://dx.doi.org/10.1520/stp49440t.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kupczyk, Maciej Jan, Andrzej Michalski, Piotr Siwak, and Marcin Rosinski. "Evaluation of Cutting Edges Made of Nanocrystalline Cemented Carbides Sintered by the Pulse Plasma Method." In 18th International Federation for Heat Treatment and Surface Engineering. ASTM International, 2011. http://dx.doi.org/10.1520/stp153220120022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Piwowarska, M., T. Knych, and P. Uliasz. "Tests of Heat Treatment Conditions of AlZr0.22 Alloy, Produced using the Continuous Casting Method." In ICAA13: 13th International Conference on Aluminum Alloys. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495292.ch26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Piwowarska, M., T. Knych, and P. Uliasz. "Tests of Heat Treatment Conditions of AlZr0.22 Alloy, Produced using the Continuous Casting Method." In ICAA13 Pittsburgh. Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48761-8_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Suzuki, Yoshikazu, Singto Sakulkhaemaruethai, Ryuhei Yoshida, and Susumu Yoshikawa. "Heat Treatment Effect on the Structure of TiO2 -Derived Nanotubes Prepared by Hydrothermal Method." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118407158.ch20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Minami, Hidetoshi, Takuya Uzumaki, and Hiromoto Uwe. "Characterization of Ba1-xKxBiO3-y Synthesized by an Electrochemical Method with the Influences of Heat Treatment." In Advances in Superconductivity VIII. Springer Japan, 1996. http://dx.doi.org/10.1007/978-4-431-66871-8_93.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Eagan, Robert J., and Ronald E. Loehman. "Heat Treatment." In Inorganic Reactions and Methods. John Wiley & Sons, Inc., 2007. http://dx.doi.org/10.1002/9780470145333.ch96.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shah, Qayyum. "Analysis of Hugging Flow Through the Powerful Technique of Homotopy Asymptotic Method (HAM)." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_65.

Full text
Abstract:
AbstractA hugging flow occurs when a fluid is hugged between two undistinguishable plates fronting one another. To this end, the hugging flow between two disks in drive of unstable nature is of immense importance for its technical and scientific uses such as, molding of fluids, the study of fluid machinery such as pumps, fans, blowers, windmills, air compressors, heat exchangers, jet & rocket engines, gas turbines, power plants, pollution control equipments, air-conditioning equipments, heating & ventilation systems, breathing aids, heat-lungs machines, among others makes fluid mechani
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Heat treatment method"

1

Nakatsuka, Matthew A., Andrea C. Mansfeld, Sumil S. Thapa, Vinod P. Veedu, and Erika P. Brown. "Novel Anti-Fouling Surface Treatment for Heat Exchangers." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16734.

Full text
Abstract:
Abstract Seawater-fed heat exchangers are an effective and cost-efficient method of providing cooling to power plants and refineries located in coastal regions. However, utilization of untreated and unprocessed feedwater comes with its own challenges, including erosion due to sand particle impingement, microbial marine corrosion, and the buildup of biofilms and biofouling limiting the thermal heat transfer. Current methods of mitigating such effects require extensive and costly periodic maintenance, along with significant scheduled exchanger downtime. This work proposes a novel method of addre
APA, Harvard, Vancouver, ISO, and other styles
2

Poirier, D., B. Guerreiro, B. Jodoin, A. Weck, and J. D. Giallonardo. "Laser Heat Treatment for Improved Cold-Sprayed Copper Coating Ductility." In ITSC 2025. ASM International, 2025. https://doi.org/10.31399/asm.cp.itsc2025p0376.

Full text
Abstract:
Abstract This work aims to evaluate the viability of laser heat treatments as a method to recover cold-sprayed coating ductility, i.e., to achieve with laser heat treatment a gain in elongation equivalent to a furnace heat treatment. A 4kW YAG laser was employed to heat treat 4-5 mm thick coldsprayed copper coatings produced on coupons and on prototypes of large components. Surface temperatures were monitored during the heat treatment using an infrared camera. Hardness and tensile properties were measured on as-sprayed and heat-treated coatings. Microstructural examinations provided additional
APA, Harvard, Vancouver, ISO, and other styles
3

Decker, Tom, and Eric Sjerve. "Web Based Wireless Heat Treating Services." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0078.

Full text
Abstract:
Abstract For optimal performance, industrial applications rely on steel and other materials with precisely engineered properties. When these materials undergo welding during construction or modification while in service, their properties can degrade, potentially compromising their functionality. On-site heat treatment represents a critical method for restoring desirable material properties, traditionally performed by technicians who carefully monitor heating and cooling processes. Thermal Technologies International implements these treatments in accordance with industry standards, utilizing pr
APA, Harvard, Vancouver, ISO, and other styles
4

Fan, Dingge, Xiongxi Zhao, Jian Zhang, and Jiantang Jiang. "Residual Stress and Precipitation Behavior during Heat Treatment of FGH96 Alloy." In QDE 2025. ASM International, 2025. https://doi.org/10.31399/asm.cp.qde2025p0141.

Full text
Abstract:
Abstract The impact of heat treatment on residual stress and precipitation behavior in FGH96 alloy was investigated. Results obtained from the contour method for evaluating residual stress in FGH96 alloy demonstrate that aging conducted at 760°C enhances mechanical properties and reduces residual stress levels.
APA, Harvard, Vancouver, ISO, and other styles
5

Wu, Kaisheng, Paul Mason, Gustaf Sterner, and Qing Chen. "Modeling Precipitation Kinetics during Heat Treatment with CALPHAD-Based Tools." In HT 2013, edited by B. Lynn Ferguson. ASM International, 2013. https://doi.org/10.31399/asm.cp.ht2013p0206.

Full text
Abstract:
Abstract Traditionally, chemists and metallurgists have used phase diagrams and tables of thermodynamic data for understanding and making predictions related to alloy development and process improvement, such as heat treatment. However, for complex, multi-component systems that extend beyond ternaries, such an approach can be limiting. Computational thermodynamics and specifically the CALPHAD approach allows for the prediction of the thermodynamic properties and phase equilibria of multi-component, multi-phase systems based on mathematical models that describe the Gibbs energy as a function of
APA, Harvard, Vancouver, ISO, and other styles
6

Aylott, P. J., J. F. D. Stott, R. D. Eden, and H. K. Grover. "Monitoring of Marine Biofouling of Titanium Tubed Heat Exchanger Using a Remote Controlled Thermal Resistance Method." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95195.

Full text
Abstract:
Abstract A study of the marine biofouling characteristics for titanium tubed heat exchangers has been carried out using a purpose designed test rig that enabled an accurate simulation of expected service conditions. Test rigs were constructed as self-contained remote controllable units that could be moved from site to site enabling fouling data to be obtained for different seawater environments. The quantification of fouling was performed using a combination of thermal resistance measurements, biofilm sample analyses and differential pressure measurements and data were obtained giving real-tim
APA, Harvard, Vancouver, ISO, and other styles
7

Ali Al Ghamdi, Mohammed. "Effect of Heat Treatment on Mechanical Properties of ATIG Welded Aluminum Alloy." In MPWT 2019. NACE International, 2019. https://doi.org/10.5006/mpwt19-14282.

Full text
Abstract:
Abstract The 6XXX aluminum alloys are magnesium and silicon alloys that are widely used in several applications for their attractive mechanical properties. However, there are some problems associated with the welding of aluminum alloys. Aluminum alloys are difficult to weld due to their high thermal conductivity and high thermal expansion. The weldability of aluminum alloys varies significantly, depending on its chemical composition. In this paper, an experimental investigation studies the effect of heat treatment on mechanical properties of 6063 aluminum alloy for a single pass of Activated T
APA, Harvard, Vancouver, ISO, and other styles
8

Souza, D. E. F., W. W. Bose Filho, G. A. Martiniano, M. T. P. Paes, J. E. S. Leal, and S. D. Franco. "Heat Treatment and Notch Severity Effects on the UNS N07718 Alloy Susceptibility to Hydrogen Embrittlement Evaluated by the ISL Method." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16291.

Full text
Abstract:
Abstract Bolts and stud bolts produced from UNS N07718 are used for subsea applications in the oil and gas industry. These components are commonly connected to cathodic protection systems to avoid corrosion degradation, but it can result in free hydrogen formation on the metal surface, and its subsequent adsorption and diffusion may lead to premature fracture. The present study investigated the influence of different UNS N07718 microstructures, obtained according to the API 6A CRA and ASTM B637 standards, on the hydrogen embrittlement susceptibility. For this purpose, a modified Incremental St
APA, Harvard, Vancouver, ISO, and other styles
9

Noh, Joo-Hyong, Dong-Jae Yi, Yui Shishido, Jong-young Park, and Hideo Honma. "Applicability of Flash Lamp Annealing (FLA) Method on Heat Treatment Cu Thin Film and Low Dielectric Resin Films." In 2024 IEEE 26th Electronics Packaging Technology Conference (EPTC). IEEE, 2024. https://doi.org/10.1109/eptc62800.2024.10909754.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thorstensen, Eivind Bruun, Atle Helge Qvale, Vebjørn Andresen, Roy Johnsen, and Paal Bratland. "Effect of Heat Treatment and Manufacturing Method on the Susceptibility to Hydrogen Induced Stress Cracking of UNS N06625." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20899.

Full text
Abstract:
Abstract This paper presents results obtained from examining the effect of heat treatment and production method on the hydrogen induced stress cracking (HISC) susceptibility of UNS N06625 (Alloy 625). Five different versions of Alloy 625 were examined: Hot forged material heat treated at 920 °C, 1010 °C and 1100 °C respectively, material produced by hot isostatic pressing (HIP) and material that has been solution annealed and strain hardened (cold worked) at a temperature below secondary phase formation. The different versions of Alloy 625 were initially characterized by identifying the critic
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Heat treatment method"

1

Veer, J. van der, and J. van Wortel. L51758 Non-Destructive Assurance of Quality of Heat-Treated Fittings. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0010338.

Full text
Abstract:
Sometimes heat treated components fail to pass the specified minimum mechanical requirements (yield strength, Charpy V-notch toughness). The influence of the complete heat cycle on the end results is not well understood and without a N.D.T. method for determining these properties the pipeline companies have difficulty in determining acceptable and non-acceptable individual components. In the quality control process for heat treated components, it is important to have a non-destructive testing technique available for predicting the yield strength and, if necessary, Charpy V-notch properties. In
APA, Harvard, Vancouver, ISO, and other styles
2

Hansen, Peter J., Zvi Roth, and Jeremy J. Block. Improving oocyte competence in dairy cows exposed to heat stress. United States Department of Agriculture, 2014. http://dx.doi.org/10.32747/2014.7598163.bard.

Full text
Abstract:
Original Objectives. The overall goal is to develop methods to increase pregnancy rate in lactating dairy cows exposed to heat stress through methods that minimize damage to the oocyte and embryo caused by heat stress. Objectives were as follows: (1) examine the protective effects of melatonin on developmental competence of oocytes exposed to elevated temperature in vitro; (2) test whether melatonin feeding can improve developmental competence of oocytes in vivo and, if so, whether effects are limited to the summer or also occur in the absence of heat stress; and (3) evaluate the effectiveness
APA, Harvard, Vancouver, ISO, and other styles
3

Burak, Leonid Ch, and Nataliya L. Ovsyannikova. Modern methods of storage and packaging of garden strawberries (Fragaria × ananassa Duch.) (review). Contemporary horticulture, 2024. https://doi.org/10.12731/2312-6701-266171.

Full text
Abstract:
Postharvest treatment of garden strawberries and the development of effective storage methods are crucial to increase the shelf life and preserve its quality until consumption. Although some reviews on certain treatment technologies have been published, we have not found studies that considered and compared common and advanced methods of storing garden strawberries. Therefore, the goal of this study is to review modern postharvest methods of strawberry storage (Fragaria × ananassa Duch). The review includes reports published in English and Russian in 2014—2024. PubMed, Scopus, Web of Science,
APA, Harvard, Vancouver, ISO, and other styles
4

Tang, Jiqin, Gong Zhang, Jinxiao Xing, Ying Yu, and Tao Han. Network Meta-analysis of Heat-clearing and Detoxifying Oral Liquid of Chinese Medicines in Treatment of Children’s Hand-foot-mouth Disease：a protocol for systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.1.0032.

Full text
Abstract:
Review question / Objective: The type of study was clinical randomized controlled trial (RCT). The object of study is the patients with HFMD. There is no limit to gender and race. In the case of clear diagnosis standard, curative effect judgment standard and consistent baseline treatment, the experimental group was treated with pure oral liquid of traditional Chinese medicine(A: Fuganlin oral liquid, B: huangzhihua oral liquid, C: Lanqin oral liquid, D: antiviral oral liquid, E: Huangqin oral liquid, F: Pudilan oral liquid, G: Shuanghuanglian oral liquid.)and the control group was treated with
APA, Harvard, Vancouver, ISO, and other styles
5

Jin, Wenqin, Huangping Ai, Lingfeng Li, Yuling Zuo, and Zhao Jin. Efficacy and safety of traditional Chinese medicine based on the method of "nourishing kidney and clearing heat" as adjuvant in the treatment of diabetes mellitus patients with periodontal disease: A Systematic review and meta-Analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2021. http://dx.doi.org/10.37766/inplasy2021.10.0007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ovalle, Samuel, E. Viamontes, and Tony Thomas. Optimization of DLP 3D Printed Ceramic Parts. Florida International University, 2021. http://dx.doi.org/10.25148/mmeurs.009776.

Full text
Abstract:
Digital Light Processing (DLP) 3D printing allows for the creation of parts with advanced engineering materials and geometries difficult to produce through conventional manufacturing techniques. Photosensitive resin monomers are activated with a UV-producing LCD screen to polymerize, layer by layer, forming the desired part. With the right mixture of photosensitive resin and advanced engineering powder material, useful engineering-grade parts can be produced. The Bison 1000 is a research-grade DLP printer that permits the user to change many parameters, in order to discover an optimal method f
APA, Harvard, Vancouver, ISO, and other styles
7

Glover, Alexandra, and Matthew Zappulla. The Viability of Selected Vacuum Furnace Quench Methods for Heat Treatment of Uranium. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1897415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hou, Ruirui, Jisen Zhao, Mi Sun, and Dong Guo. Evidence Support for Xinmailong Injection in the Treatment of Heart Failure: An Overview of Systematic Reviews and Meta-Analyses. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.9.0032.

Full text
Abstract:
Review question / Objective: We expect to find higher-level evidence supporting the efficacy of TCM injection-Xinmailong injection in the treatment of heart failure through the methods outlined in the systematic review, and perhaps it can provide complementary alternative therapy for heart failure treatment. Condition being studied: Heart Failure. We have been committed to the research of TCM evidence-based medicine. First, we selected the topic, and then conducted a literature search, and found that the selected topic could continue to be studied. We then developed a protocol for writing an o
APA, Harvard, Vancouver, ISO, and other styles
9

Lukezich. L51775 Susceptibility of Modern ERW Pipe to Selective Weld Seam Corrosion in Wet Environments. Pipeline Research Council International, Inc. (PRCI), 1998. http://dx.doi.org/10.55274/r0010424.

Full text
Abstract:
Grooving corrosion is a phenomenon by which the weld seam of electric resistance welded (ERW) pipe is preferentially attacked in wet natural gas environments containing CO,. The attack initiates as an aligned string of pits which grow and intersect, forming a round-bottomed groove of damage centered on the weld seam. The susceptibility of ERW pipe to this damage mechanism is known to be related to the chemical composition (particularly the sulfur content) of the pipe, the welding process employed, and the use of a post weld heat treatment. Of particular concern to the natural gas pipeline indu
APA, Harvard, Vancouver, ISO, and other styles
10

McCausland, Rachel, Joann Fontanarosa, and Ravi Patel. Nonemergent Percutaneous Coronary Intervention Versus Optimal Medical Treatment for Stable Ischemic Heart Disease: A Rapid Response Literature Review. Agency for Healthcare Research and Quality (AHRQ), 2023. http://dx.doi.org/10.23970/ahrqepcrapidcoronary.

Full text
Abstract:
Aims. There is uncertainty around the optimal role of percutaneous coronary intervention (PCI) for management of chronic coronary syndrome, specifically when patients have disease in multiple coronary vessels and disease in the proximal portion of the left anterior descending coronary artery. This uncertainty was reflected in 2021 guidance from the American College of Cardiology (ACC)/American Heart Association (AHA) on coronary artery revascularization. The Agency for Healthcare Research and Quality has commissioned this rapid response literature review to meet a Congressional request for a s
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Heat treatment method' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography