Log in

Relevant bibliographies by topics / Hemming

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Hemming'

Author: Grafiati

Published: 4 June 2021

Last updated: 13 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Hemming.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Hemming"

1

Wan, Zi Gang. "Design and Simulation of the Robot Flexible Roller Hemming System." Applied Mechanics and Materials 602-605 (August 2014): 997–1000. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.997.

Full text

Abstract:

The roller hemming system could be verified before it is put into operation by virtual manufacturing technology. This paper analyses roller hemming process, establish roller hemming system 3D models, include roller hemming tool system, roller hemming fixtures system and roller hemming robot. Finally verify the reasonableness of roller hemming system based on DELMIA.

APA, Harvard, Vancouver, ISO, and other styles

2

Hönle, Severin, and Mathias Liewald. "Experimental Investigation of Energy Savings during Table-Top Hemming of Aluminum Alloys." Key Engineering Materials 611-612 (May 2014): 947–54. http://dx.doi.org/10.4028/www.scientific.net/kem.611-612.947.

Full text

Abstract:

The organization of workflow and design of tools and processes in automotive manufacturing will become even more dominated by topics of energy efficiency due to increasing environmental requirements in the future. From this point of view a detailed analysis of all manufacturing processes in the body shop, taking into account the reduction of energy consumption and required area covered by equipment, is necessary. In automotive manufacturing welding and gluing processes as well as metal forming processes are commonly used for joining of single parts to an assembly group, such as doors or closur

APA, Harvard, Vancouver, ISO, and other styles

3

Yun, Shi Zhi, Yu Liu, Yu Shi Jian, Peng Chao Yang, and Wang An Bing. "Warp Phenomenon Analysis in Hemming Process of Autobody Panel." Applied Mechanics and Materials 66-68 (July 2011): 545–50. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.545.

Full text

Abstract:

In this paper, the hemming process, which widely used in automobile industry, was studied by a method of constructing mechanical models combined with FEM simulation results. The warp producing mechanism in the straight edge- plane hemming process was analyzed in detail using this mechanical model. The reason why the warp produced at the position of near the contact point between the out panel and the position surface of hemming die during the pre-hemming process, and the phenomena of warp reducing firstly and then increasing before the position point T and the warp reducing again after point T

APA, Harvard, Vancouver, ISO, and other styles

4

Zubeil, Martin, Karl Roll, and Marion Merklein. "Improved Roller Hemming System for High Volume Part Production." Key Engineering Materials 473 (March 2011): 168–75. http://dx.doi.org/10.4028/www.scientific.net/kem.473.168.

Full text

Abstract:

Roller hemming is usually applied for hang-on-parts such as hoods, doors or trunk-lids which all have complex non-linear geometries. The flange is often hemmed along both surfaces and edges which have 3D curvilinear shapes. Minimization of hemming defects and the requirement to improve cycle time of the roller hemming process are essential for roller hemmed hang-on-parts in the automotive industry. Different systems such as the driven roller hemming provide the possibility to increase the strain rate without loosing surface quality and dimensional stability. Investigating the influence of fric

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, Jian Qiang, Ya Wen Huang, Guang Rui Zhou, Zhao Long Niu, and Zi Wen Cheng. "Process Parameters Study on Robot Rope Hemming of the Hood." Applied Mechanics and Materials 602-605 (August 2014): 950–53. http://dx.doi.org/10.4028/www.scientific.net/amm.602-605.950.

Full text

Abstract:

According Robot roller hemming is known as an assembly method with high flexibility and automated rate for closures in automotive bodies. The hemming tool is manipulated by controlling the industrial robot to complete the formation of closures (i.e. doors, hoods, tailgates and trunklids). In this paper, we shall first briefly introduce the rope hemming process, detail on the impact of process parameters on the rope height, roll-in and roll-out with the FEA model to simulate the rope hemming process. Then the rope hemming defects are discussed in later sections. This paper studies the process p

APA, Harvard, Vancouver, ISO, and other styles

6

Lewis, W. "Colin Hemming." BMJ 349, sep02 4 (2014): g5364. http://dx.doi.org/10.1136/bmj.g5364.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lin, Ju Guang, Er Wei Wang, and Guang Rui Zhou. "Hemming Process Simulation of Table-Top Hemming Machine." Applied Mechanics and Materials 644-650 (September 2014): 2177–80. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.2177.

Full text

Abstract:

Influence of different pre-hem paths on the flange geometry was studied first. According to the results of simulation the vertical pre-hem path was applied. Effects of the process parameters including pre-hem angle, flange length and friction coefficient on Roll-in/out were also investigated in this paper. Results of the simulations show that roll-in values decrease with pre-hem angle increasing and increase with flange length and friction coefficient increasing. And in the case of 6×45° leads least hemming force.

APA, Harvard, Vancouver, ISO, and other styles

8

Sun, Yue Dong, and Hua Hui Wu. "A Study on the Dimension of Vehicle Closure Hemming Components." Advanced Materials Research 482-484 (February 2012): 895–99. http://dx.doi.org/10.4028/www.scientific.net/amr.482-484.895.

Full text

Abstract:

Based on the manufacturing system of car body , the dimensional requirement of hemming components has been concluded in this article. The function of hemming master control points, and the geometry dimension of the hemming die has also been accountted for here.

APA, Harvard, Vancouver, ISO, and other styles

9

Huang, Yi-Ping, Bor-Tung Jiang, Chia-Hung Wu, and Jen-Yuan Chang. "Vision-Based Path Guidance to Achieve Dies-Free Roller Hemming Process." Applied Sciences 11, no. 12 (2021): 5741. http://dx.doi.org/10.3390/app11125741.

Full text

Abstract:

Due to its high production flexibility, roller hemming has become the mainstream process for forming and joining metal sheets in the automotive industry. The traditional roller hemming process requires specific dies to support sheet metal parts and repeated offline manual adjustment of hemming routes, resulting in high die costs, high time consumption, and excessive labor inputs. The universal platform presented in this paper could replace specific dies to effectively reduce costs and expand production flexibility. To reach this objective, a vision-based automatic compensation path to achieve

APA, Harvard, Vancouver, ISO, and other styles

10

Lin, G., K. Iyer, S. J. Hu, W. Cai, and S. P. Marin. "A computational design-of-experiments study of hemming processes for automotive aluminium alloys." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219, no. 10 (2005): 711–22. http://dx.doi.org/10.1243/095440505x32661.

Full text

Abstract:

Hemming is a three-step sheet-folding process utilized in the production of automotive closures. It has a critical imact on the performance and perceived quality of assembled vehicles. Using a two-dimensional finite element model, this paper presents a design-of-experiments (DOE) study of the relationships between important hemming process parameters and hem quality for aluminium alloy AA 6111-T4PD flat surface-straight edge hemming. The quality measures include roll-in/roll-out of the hem edge as well as the maximum true strain on the exposed bent surface. The finite element (FE) model combin

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Hemming"

1

Wu, Hsien-Chih. "Analytical and Numerical Investigations of Sheet Metal Bending, Flanging and Hemming." The Ohio State University, 1999. http://rave.ohiolink.edu/etdc/view?acc_num=osu1408543279.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Livatyali, Haydar. "Computer aided process design of selected sheet metal bending processes - flanging & hemming /." The Ohio State University, 1998. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487953204283039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lelievre, Thierry. "Phylogénie des polyommatinae et structure génétique de six espèces du genre Lysandra, Hemming (Lépidoptères lycaenidae)." Aix-Marseille 1, 1992. http://www.theses.fr/1992AIX11008.

Full text

Abstract:

Une étude phylogénétique de 47 espèces de polyommatinae (lépidoptères, lycaenidae) a été réalisée en France et en Espagne. Elle repose sur l'examen electrophoretique de 26 systèmes enzymatiques. Ces données sont traitées par les méthodes uni- et multidimensionnelles : classifications hiérarchiques, acp, afc et afd. Si certains aspects de la systématique classique des polyommatinae sont confirmes par nos résultats, le regroupement des taxa sous le genre polyommatus ne demeure pas pertinent. Le mérite de la classification proposée est sa parcimonie au niveau de la nomenclature. Par ailleurs, une

APA, Harvard, Vancouver, ISO, and other styles

4

Hemming, Sally Anne. "Functional analysis of the ninth subunit of yeast RNA polymerase II, RPB9 / by Sally Anne Hemming." *McMaster only, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wendel, Erik. "Evaluation of potential for metal/polymer/metal sandwich material as outer panels for trucks." Thesis, KTH, Materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-247958.

Full text

Abstract:

Reducing the weight of the truck vehicle conveys more cargo to be carried by thetrailer. This has a significant impact on the efficiency of the transport lowering both the total cost of cargo moved and the total carbon dioxide emitted. Half of the body in-white weight of a truck is comprised out of panels made out of thin mild forming steel which cannot be made thinner to reduce weight due to the lowered stiffness it would entail. Sandwich materials have a high stiffness to weight ratio and would for the same panel thickness as regular forming steel have a comparable bending stiffness but lowe

APA, Harvard, Vancouver, ISO, and other styles

6

Nara, Kameswara R. "Analysis of non load bearing two component (2K) adhesives; under the automotive hemming process variations; thermogravimetric, calorimetric and composition analyses." Connect to this title online, 2008. http://etd.lib.clemson.edu/documents/1219861632/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lysell, Roland. "Bo Georgii-Hemming, Träd. Ett försök till lacansk läsning av Walter Ljungquists berättelser, särskilt Jerk Dandelinsviten. (Skrifter utgivna av Litteraturvetenskapliga institutionen vid Uppsala universitet 33) Uppsala 1997." Uppsala : Svenska Litteratursällskapet, 1997. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-201033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Mattei, Laurent. "Pliabilité des tôles en alliages d'aluminium pour la carrosserie automobile analyse des mécanismes d'endommagement." Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2011. http://tel.archives-ouvertes.fr/tel-00665574.

Full text

Abstract:

Les alliages d'aluminium de la série 5xxx et 6xxx sont des matériaux de choix pour la carrosserie automobile. Le panneau extérieur est généralement en alliage 6xxx et le panneau intérieur en 5xxx. Les deux sont assemblés par sertissage. Le sertissage consiste à replier la tôle extérieure sur la tôle de renfort. Ce procédé peut conduire à des états de surfaces insatisfaisants pour la tôle externe. Ce travail porte sur la caractérisation de la pliabilité des alliages 6xxx. L'influence du taux de manganèse et du temps de traitement thermique de Bake Hardening a été examinée.Les mécanismes d'endom

APA, Harvard, Vancouver, ISO, and other styles

9

Frings, Christian. "Inhibition von Distraktorinformation." Kassel : Kassel Univ. Press, 2004. http://deposit.d-nb.de/cgi-bin/dokserv?idn=97180110X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Erdmann, Meike. "Hemmung der Handmotorik nach transkranieller Magnetstimulation." [S.l.] : [s.n.], 1999. http://www.sub.uni-hamburg.de/disse/211/Disse.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Hemming"

1

Hemming, Adrian. Adrian Hemming. Art Space Gallery, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hemming the water. Four Way Books, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Elizabeth, Morgan. Sewing church linens: Convent hemming and simple embroidery. Morehouse Pub., 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hemming, Adrian. Adrian Hemming: Arts Council Gallery, Belfast 6-29 June 1991. Arts Council Gallery, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jordan, Richard H. IDE-O-MATIC: Frei von Erröten, Schüchternheit und anderen sozialen Hemmungen ; neues Selbstvertrauen - mehr Lebensfreude ; 25 Lehrbriefe. 2nd ed. Steiner, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hostettler, Nadine. Die letzte Hemmung: Roman. Schöffling, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gibbons, Henning. Analogien latenter Hemmung jenseits von Lernprozessen: Experimentelle Ergebnisse zur Aufmerksamkeits-Hypthese der latenten Hemmung. Garamond, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Graham, Otway, ed. Eddie Hemmings coming of age: A cricketing autobiography. Stanley Paul, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ulrich, Kaiser. Das Motiv der Hemmung in Husserls Phänomenologie: Ulrich Kaiser. Fink, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

The day of the dandelion: An Arthur Hemmings mystery. Simon & Schuster, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Hemming"

1

Mirfendereski, Guive. "Hemming of Persia at Gudri (1881–1893)." In A Diplomatic History of the Caspian Sea. Palgrave Macmillan US, 2001. http://dx.doi.org/10.1057/9780230107571_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Esquivel, Eduardo, Giuseppe Carbone, Marco Ceccarelli, and Carlos Jáuregui. "An Experimental Characterization of Roll Hemming Process." In Multibody Mechatronic Systems. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-67567-1_35.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Levinson, Amanda, Raja K. Mishra, John Carsley, Roger D. Doherty, and Surya R. Kalidindi. "Microstructural Evolution during Roller Hemming of AZ31 Magnesium Sheet." In Magnesium Technology 2011. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118062029.ch72.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Levinson, Amanda, Raja K. Mishra, John Carsley, Roger D. Doherty, and Surya R. Kalidindi. "Microstructure Evolution during Roller Hemming of AZ31B Magnesium Sheet." In Magnesium Technology 2011. Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48223-1_72.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Esquivel, E., Giuseppe Carbone, Marco Ceccarelli, and J. Jáuregui. "Requirements and Constraints for a Robotized Roll Hemming Solution." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-49058-8_27.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Arroyo, Amaia, Iñaki Pérez, Marian Gutierrez, Jesús Bahillo, and Herman Toja. "Roller Hemming: A New Simulation Model for the Automotive Industry." In Proceedings of the 36th International MATADOR Conference. Springer London, 2010. http://dx.doi.org/10.1007/978-1-84996-432-6_19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fan, Yong, Jun Shan, Yu Chen, Xianming He, Jingzhen Wu, and Thomas Dave. "Single-Composition Hemming Sealant Application for an Aluminium Alloy Hood." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33747-5_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lee, Seoung Soo, Ho Yeon Ryu, Keun Sang Park, and Hyo Sang Jung. "Development of Systematic Design Automation System for Hemming Die Manufacturing Process." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-74477-1_79.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Tong, Wei. "3D Surface Elastic-Plastic Strain Mapping in Hemming, Bending, and Indentation Tests." In Experimental Analysis of Nano and Engineering Materials and Structures. Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-6239-1_277.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ceretti, Elisabetta, Aldo Attanasio, Antonio Fiorentino, and Claudio Giardini. "Sheet Hemming with Rolling Tools: Analysis and Optimization of the Part Quality." In Sheet Metal 2007. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-437-5.357.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Hemming"

1

Limon-Leyva, Pablo Alberto, Pedro de Jesús García-Zugasti, Antonio de J. Balvantín-García, José A. Diosdado de la Peña, Isidro de Jesus Sanchez-Arce, and Eder Hazael Govea-Valladares. "Experimental Analysis and Testing of the Hemming Process Types Utilized in the Automotive Industry." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87232.

Full text

Abstract:

A comparative experimental analysis of three common hemming processes used in the automotive industry is presented. These processes are die hemming, table hemming, and roll hemming. We aim to determine which one of the three processes provides the better quality hemming. The die hemming and table hemming used in this study were performed with custom made tooling and a 35 tonne hydraulic press. Similarly, roll hemming was performed using a custom made workbench with a three-degree of freedom system of rolls. The material used for testing was aluminum sheet (6011); three rolling directions were

APA, Harvard, Vancouver, ISO, and other styles

2

Lin, Guosong, Muammer Koc¸, S. Jack Hu, and Wayne Cai. "Three-Dimensional Numerical Simulations of Curved Edge-Curved Surface Hemming of Aluminum Alloy." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60705.

Full text

Abstract:

Hemming is a manufacturing process to fold a sheet onto itself or another sheet. The dimensional defects (roll-in/rollout, warp/recoil, distortion due to springback, etc.) of hems critically impact the perceived quality of automotive exteriors. This paper summarizes the procedures and the results of three-dimensional (3D) numerical simulations on curved edge-curved surface hemming of aluminum alloy AA6111-T4PD. A solid-element model is built in ABAQUS using explicit quasi-static finite element (FE) procedure for flanging, pre-hemming and final hemming, and implicit procedure for the correspond

APA, Harvard, Vancouver, ISO, and other styles

3

Lin, Guosong, S. Jack Hu, Muammer Koc¸, Wayne Cai, and Michael L. Wenner. "A Computational Response Surface Study of Curved-Surface-Curved-Edge Aluminum Hemming Using Solid-to-Shell Mapping." In ASME 2006 International Manufacturing Science and Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/msec2006-21031.

Full text

Abstract:

Hemming is a manufacturing process of folding a panel onto itself or another sheet. Quality of hemming is characterized by geometry and formability. This paper presents a response surface study of 3D curved-surface-curved-edge hemming of an aluminum alloy, AA6111-T4, using finite element analysis. Solid elements and explicit FE solver are used for simulations of flanging, pre- and final hemming, and shell elements with implicit solver are deployed for springback prediction. A novel procedure called “solid to shell mapping” is developed to bridge the solid elements with the shell elements. Veri

APA, Harvard, Vancouver, ISO, and other styles

4

Sydor, Andrij, Diana Zahorodnia, Pavlo Bykovyy, Ivan Kit, Vasyl Koval, and Konrad Grzeszczyk. "Image Recognition Methods Based on Hemming Distance." In 2019 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS). IEEE, 2019. http://dx.doi.org/10.1109/idaacs.2019.8924295.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Rajak, Ashish, and Sachin Kore. "Electromagnetic Hemming of Aluminum Sheets using FEM." In International Conference on Communication and Signal Processing 2016 (ICCASP 2016). Atlantis Press, 2017. http://dx.doi.org/10.2991/iccasp-16.2017.13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sigvant, Mats. "FE-Simulation Of Hemming In The Automotive Industry." In NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process. AIP, 2005. http://dx.doi.org/10.1063/1.2011300.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Burchitz, Igor, David Fritsche, Göran Grundmann, and Matthias Hillmann. "Efficient planning and numerical analysis of industrial hemming processes." In THE 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011). AIP, 2011. http://dx.doi.org/10.1063/1.3623617.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Pak, Suk-Wan, Koan-Hoi Kim, Soon-Yong Kwon, and Won-Suk Cho. "Laser Hemming Welding of Aluminum Alloy Sheets for Autobody Application." In International Pacific Conference On Automotive Engineering. SAE International, 1993. http://dx.doi.org/10.4271/931935.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Gürgen, Selim, Mustafa İlhan Gökler, Haluk Darendeliler, Çetin Cengiz Çelikkaya, and Kemal Erden. "Analysis of roller hemming process for a vehicle tailgate closure." In THE 11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES: NUMIFORM 2013. AIP, 2013. http://dx.doi.org/10.1063/1.4806848.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Debuire, Fabien, and Valérie Zwilling. "Experimental and Numerical Approaches of Hemming: Application on Steel and Aluminum6016." In International Body Engineering Conference & Exhibition and Automotive & Transportation Technology Congress. SAE International, 2002. http://dx.doi.org/10.4271/2002-01-2084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Hemming"

1

Schenten, Julian. Product Carbon Footprint (PCF) und die Anreizsituation der Akteure in den Wertschöpfungsketten – Ergebnisse einer Befragung von Unternehmensverbänden. Sonderforschungsgruppe Institutionenanalyse, 2013. http://dx.doi.org/10.46850/sofia.9783941627284.

Full text

Abstract:

Wer den Carbon Footprint für ein Produkt (Product Carbon Footprint oder PCF) ermitteln will, benötigt zu allen Abschnitten im Lebensweg des Produkts Daten zum Ausstoß klimarelevanter Gase. Das Unternehmen, das den PCF für eines seiner Erzeugnisse errechnen möchte, ist daher darauf angewiesen, dass unterschiedliche Akteure – entlang des produktspezifischen Lebenswegs, aber auch im eigenen Betrieb oder Konzernverbund – kooperieren. Dieser Beitrag untersucht die Anreiz- und Hemmnissituation von Akteuren in den Wertschöpfungsketten von Produkten. Analysiert werden sowohl der Akteur, der sein Produ

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!