Books on the topic 'High cycle fatigue solder'

Van, Ky Dang, and Ioannis Vassileiou Papadopoulos, eds. High-Cycle Metal Fatigue. Vienna: Springer Vienna, 1999. http://dx.doi.org/10.1007/978-3-7091-2474-1.

Herda, D. A. A comparison of high cycle fatigue methodologies. [Marshall Space Flight Center, Ala.]: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1992.

Hall, Rodney H. F. Crack growth under combined high and low cycle fatigue. Portsmouth: Portsmouth Polytechnic, School of Systems Engineering, 1991.

Kolenda, Janusz. Analytical procedures of high-cycle fatigue assessment of structural steel elements. Gdańsk: Technical University of Gdańsk, 1997.

Taghani, Nourberdi. Crack growth in gas turbine alloys due to high cycle fatigue. Portsmouth: Portsmouth Polytechnic, Dept. of Mechanical Engineering, 1989.

Berkovits, Avraham. Estimation of high temperature low cycle fatigue on the basis of inelastic strain and strainrate. [Washington, DC] : National Aeronautics and Space Administration: For sale by the National Technical Information Service, 1986.

Kensche, Christoph W. High cycle fatigue of glass fibre reinforced epoxy materials for wind turbines. Köln: Deutsche Forschungsanstalt für Luft- Und Raumfahrt, 1992.

Rosenberg, T. D. A compilation of fatigue test results for welded joints subjected to high stress/low cycle conditions: Stage 1. London: HMSO, 1991.

Zhu, Dongming. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. Washington, D.C: National Aeronautics and Space Administration, 1997.

High Cycle Fatigue. Elsevier, 2006. http://dx.doi.org/10.1016/b978-0-08-044691-2.x5000-0.

High Cycle Fatigue: A Mechanics of Materials Perspective. Elsevier Science, 2006.

Marquis, Gary B. High cycle spectrum fatigue of welded components. 1995.

Nicholas, Theodore. High Cycle Fatigue: A Mechanics of Materials Perspective. Elsevier Science, 2006.

Dang, Van Ky, and Papadopoulos Iōannēs V, eds. High-cycle metal fatique: From theory to applications. Wien: Springer, 1999.

Exposure time considerations in high temperature low cycle fatigue. [Washington, DC: National Aeronautics and Space Administration, 1987.

Gauthier, J. P. High Cycle Fatigue of Austenitic Stainless Steels: Final Report. European Communities / Union (EUR-OP/OOPEC/OPOCE), 1990.

A, Miller Robert, and Lewis Research Center, eds. Investigation of thermal high cycle and low cycle fatigue mechanisms of thick thermal barrier coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

A, Miller Robert, and Lewis Research Center, eds. Investigation of thermal high cycle and low cycle fatigue mechanisms of thick thermal barrier coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

(Editor), Ky Dang Van, and Ioannis V. Paradopoulos (Editor), eds. High-Cycle Metal Fatigue: From Theory to Applications (CISM International Centre for Mechanical Sciences). Springer, 2003.

1944-, Boyce Lola, and United States. National Aeronautics and Space Administration., eds. Probabilistic material strength degradation model for Inconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Probabilistic material strength degradation model for Inconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

United States. National Aeronautics and Space Administration., ed. Estimation of high temperature low cycle fatigue on the basis of inelastic strain and strainrate. [Washington, DC] : National Aeronautics and Space Administration: For sale by the National Technical Information Service, 1986.

S, Manson S., Halford Gary R, and United States. National Aeronautics and Space Administration., eds. Environmental degradation of 316 stainless steel in high temperature low cycle fatigue. [Washington, DC]: National Aeronautics and Space Administration, 1987.

DePiero, Anthony H. High cycle fatigue modeling and analysis for deck floor truss connection details. 1997.

Effects of Shot-Peening on High Cycle Fretting Fatigue Behavior of Ti- 6Al-4V. Storming Media, 2002.

1947-, Miller Robert A., and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Inforamtion Program, 1997.

The Development of a Finite Element Program to Model High Cycle Fatigue in Isotropic Plates. Storming Media, 2001.

D, Baust Henry, Agrell Johan, and NASA Glenn Research Center, eds. Management of total pressure recovery, distortion and high cycle fatigue in compact air vehicle inlets. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2002.

(Editor), W. O. Soboyejo, and T. S. Srivatsan (Editor), eds. High Cycle Fatigue of Structural Materials: Symposium Proceedings in Honor of Professor Paul C. Paris. Minerals, Metals, & Materials Society, 1998.

Effects of Foreign Object Damage From Small Hard Particles on the High- Cycle Fatigue Life of Ti-6Al-4V. Storming Media, 1999.

1944-, Boyce Lola, and United States. National Aeronautics and Space Administration., eds. Probabilistic material strength degradation model for Iconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects: Final technical report of project entitled Development of advanced methodologies for probabilistic constitutive relationships of material strength models, phase 5 and 6. San Antonio, TX: Division of Engineering, University of Texas at San Antonio, 1995.

1944-, Boyce Lola, and United States. National Aeronautics and Space Administration., eds. Probabilistic material strength degradation model for Iconel 718 components subjected to high temperature, high-cycle and low-cycle mechanical fatigue, creep, and thermal fatigue effects: Final technical report of project entitled Development of advanced methodologies for probabilistic constitutive relationships of material strength models, phase 5 and 6. San Antonio, TX: Division of Engineering, University of Texas at San Antonio, 1995.

Andrews, R. M., T. D. Rosenberg, and T. R. Gurney. A Compilation of Fatigue Test Results for Welded Joints Subjected to High Stress/Low Cycle Conditions <196> Stage 1 (Offshore Technology Information). Stationery Office Books, 1991.

S, Srivatsan T., ASM International, Minerals, Metals and Materials Society, Minerals, Metals and Materials Society. Structural Materials Division, and ASM's Materials Week '97 (1997 : Indianapolis, Indiana), eds. High cycle fatigue of structural materials: Symposium Proceedings in honor of: Professor Paul C. Paris : proceedings of a symposium held during Materials Week '97 in Indianapolis, IN, September 14-18, 1997. Warrendale, Pennsylvania: TMS, 1997.

1930-, Paris P. C., Soboyejo W. O, Srivatsan T. S, and Minerals, Metals and Materials Society. Structural Materials Division., eds. High cycle fatigue of structural materials: Symposium proceedings in honor of Professor Paul C. Paris : proceedings of a symposium sponsored by the Structural Materials Division (SMD) of the Minerals, Metals and Materials Society (TMS) held during Materials Week '97 in Indianapolis, IN, September 14-18, 1997, hosted by the Minerals, Metals and Materials Society and ASM International. Warrendale, Pa: The Society, 1997.