Log in

Relevant bibliographies by topics / High quasi isostatic pressure

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'High quasi isostatic pressure'

Author: Grafiati

Published: 4 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'High quasi isostatic pressure.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "High quasi isostatic pressure"

1

Ni, Xinhua, Qiongxi Liu, and Zhihong Du. "Microstructure and surface morphology change of hydrogenated diamond-like carbon coating with gradient Cr and Si under high temperature and high pressure." Journal of Physics: Conference Series 2760, no. 1 (2024): 012068. http://dx.doi.org/10.1088/1742-6596/2760/1/012068.

Full text

Abstract:

Abstract A series of annealing treatments were designed to investigate the microstructure structure and surface morphology of hydrogenated diamond-like carbon coating with gradient Cr and Si (DCrSi) in different environments (argon & isostatic pressure) at different temperatures (400°C, 500°C, and 600°C). The pressure effect on the stability of DCrSi coatings was deduced from the analysis of the microstructure structure and surface morphology by using scanning electron microscopy (SEM), surface roughness test, and Raman spectroscopy. The experiment results show that no apparent change to t

APA, Harvard, Vancouver, ISO, and other styles

2

Sutarya, D., I. R. Pamungkas, H. Sukma, and DS A Sartono. "The Effect of Catalysts Addition to Silicone Rubber as Pressure Transmitting Medium in the Pebble Fuel Production Process." Journal of Physics: Conference Series 2048, no. 1 (2021): 012017. http://dx.doi.org/10.1088/1742-6596/2048/1/012017.

Full text

Abstract:

Abstract Pebble Fuel is a spherical fuel for high temperature gas-cooled reactors (HTGR). This fuel must have a homogeneous density distribution. Hyperelastic material is used as a pressure transmitting medium (PTM) material in making Pebble fuel using the cold quasi-isostatic pressing method. PTM material properties and characteristics were predicted using the finite element analysis method. The problem is the type of material used and its suitable composition to make a pressure-transmitting medium that has the properties and characteristics of the material as predicted. This research discuss

APA, Harvard, Vancouver, ISO, and other styles

3

Tetiana, Prikhna, Lokatkina Anastasiia, Moshchil Viktor, et al. "Investigation of mechanical characteristics of materials based on refractory borides." TECHNOLOGY AUDIT AND PRODUCTION RESERVES 6, no. 1(56) (2020): 40–44. https://doi.org/10.15587/2706-5448.2020.220320.

Full text

Abstract:

<em>The object of research is the effect of sintering under pressure (10 MPa–4.1 GPa) on the formation of the structure and properties of ZrB<sub>2</sub>, HfB<sub>2</sub>, and composites on their bases. It has been found that high pressure consolidation results in an improvement of mechanical characteristics. In particular, the hardness and fracture toughness of the materials sintered under 4.1 GPa pressure are higher than those of the materials obtained under hot pressing conditions at 20–30 MPa and spark-plasma sintering at 50 MPa.</em> <em>High-pressure

APA, Harvard, Vancouver, ISO, and other styles

4

Huang, Xina, Lihui Lang, Shuili Gong, and Mali Zhao. "Effect of post-treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures." Rapid Prototyping Journal 26, no. 9 (2020): 1569–77. http://dx.doi.org/10.1108/rpj-11-2019-0284.

Full text

Abstract:

Purpose The purpose of this paper is to investigate the post-treatment processes on lattice structures of selective laser melting. Moreover, the effect of pressure during hot isostatic pressing (HIP) is determined. Design/methodology/approach Three post-treatment processes, annealing at 650°C, 920°C and HIP were adopted. The microstructure evolution and mechanical properties of selective lasering melted Ti6Al4V lattice structures after post-treatment were systematically investigated by optical microscope, scanning electron microscope, electron backscattered diffraction, differential scanning c

APA, Harvard, Vancouver, ISO, and other styles

5

Sheng, L. Y., L. Nan, W. Zhang, J. T. Guo, and H. Q. Ye. "Microstructure and Mechanical Properties Determined in Compressive Tests of Quasi-Rapidly Solidified NiAl-Cr(Mo)-Hf Eutectic Alloy After Hot Isostatic Pressure and High Temperature Treatments." Journal of Materials Engineering and Performance 19, no. 5 (2009): 732–36. http://dx.doi.org/10.1007/s11665-009-9526-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gao, Yuan Lou, Ren Hua Bai, and Jian Li Zheng. "A New Method of Screw Extrusion Molding Pressure." Advanced Materials Research 490-495 (March 2012): 1893–97. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.1893.

Full text

Abstract:

This paper research on the screw extrusion technology，using a new method for improving the quality of explosive，combined with the Principle of quasi-isostatic molding technology，by loading pressure at the extrusion outlet. By simulating the process that the explosive forming in the mould ，test whether the new method meets the basic conditions of quasi-isostatic molding technology，compare advantages and disadvantages under technical specifications with traditional screw extrusion technology. Results showed that new method not only conforms to quasi-isostatic pressing conditions，but also can imp

APA, Harvard, Vancouver, ISO, and other styles

7

Lima, Estefano Enrico Pereira da Silva e., Matheus Diniz Gonçalves Coêlho, Francine Alves da Silva Coêlho, and Juliana da Silva Pereira Salgado. "Comportamento epidemiológico da doença de Chagas no Brasil: impactos e perspectivas para prevenção da transmissão oral." Research, Society and Development 12, no. 6 (2023): e4912641898. http://dx.doi.org/10.33448/rsd-v12i6.41898.

Full text

Abstract:

A doença de Chagas persiste como uma importante parasitose que afeta a humanidade, sendo classicamente transmitida por excrementos de triatomíneos, as quais são depositadas na pele durante a hematofagia, permitindo assim a penetração de formas evolutivas do protozoário Trypanosoma cruzi. Tal via de transmissão tem sido sobreposta pela transmissão oral, haja vista diversos fatores, dentre os quais o controle de populações de triatomíneos e melhorias habitacionais, bem como o aumento do consumo de alimentos, com destaque para frutas amazônicas, à exemplo do açaí. Sendo assim, objetivou-se demons

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Liyu, Heping Li, Hongbin Zhou, Sen Lin, and Shengbin Li. "Design and Application of a Rock Porosity Measurement Apparatus under High Isostatic Pressure." Minerals 12, no. 2 (2022): 127. http://dx.doi.org/10.3390/min12020127.

Full text

Abstract:

Rock porosity is a key physical parameter at room temperature and pressure that plays an important role in evaluating reserves of oil and natural gas. Research on rock porosity spans over a hundred years. However, in situ porosity under a high isostatic pressure has not been adequately explored, and the experimental conditions for measuring porosity remain unclear. To investigate the feasibility of porosity measurement under a high isostatic pressure and the optimal choice of experimental conditions for this, we design an experimental apparatus that can achieve isostatic pressure up to 200 MPa

APA, Harvard, Vancouver, ISO, and other styles

9

Barinov, V. Yu, A. V. Poletaev, and V. A. Shcherbakov. "SHS reaction in Zn-S powder blends under quasi-isostatic pressure." International Journal of Self-Propagating High-Temperature Synthesis 22, no. 1 (2013): 27–31. http://dx.doi.org/10.3103/s1061386213010020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Prokhorov, I. Yu. "Arch effect in high isostatic pressure compacts." Journal of the European Ceramic Society 19, no. 15 (1999): 2619–23. http://dx.doi.org/10.1016/s0955-2219(99)00056-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "High quasi isostatic pressure"

1

Ma, JunKun. "Synthesis of dense TiC-Ti based cerments via self-propagating high temperature synthesis and quasi-isostatic pressing /." Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2004. http://wwwlib.umi.com/cr/ucsd/fullcit?p3148261.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Chintalapati, Pavan. "Solidification under pressure of aluminum castings." Birmingham, Ala. : University of Alabama at Birmingham, 2009. https://www.mhsl.uab.edu/dt/2010r/chintalapati.pdf.

Full text

Abstract:

Thesis (Ph. D)--University of Alabama at Birmingham, 2009.<br>Title from PDF t.p. (viewed June 30, 2010). Additional advisors: Viola L. Acoff, Krishan K. Chawla, Raymond J. Donahue, Gregg M. Janowski, Harry E. Littleton (ad hoc). Includes bibliographical references (p. 143-138).

APA, Harvard, Vancouver, ISO, and other styles

3

Giordano, Valentina. "High-pressure high-temperature phases of carbon dioxide." Paris 6, 2006. http://www.theses.fr/2006PA066529.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Seyller, Thomas, Sarah Roscher, Felix Timmermann, et al. "Quasi-Freestanding Graphene on SiC(0001) by Ar-Mediated Intercalation of Antimony: A Route Toward Intercalation of High-Vapor-Pressure Elements." Wiley-VCH Verlag, 2019. https://monarch.qucosa.de/id/qucosa%3A35599.

Full text

Abstract:

A novel strategy for the intercalation of antimony (Sb) under the (6√3 × 6√3)R30° reconstruction, also known as buffer layer, on SiC(0001) is reported. Using X-ray photoelectron spectroscopy, low-energy electron diffraction, and angle-resolved photoelectron spectroscopy, it is demonstrated that, while the intercalation of the volatile Sb is not possible by annealing the Sb-coated buffer layer in ultrahigh vacuum, it can be achieved by annealing the sample in an atmosphere of Ar, which suppresses Sb desorption. The intercalation leads to a decoupling of the buffer layer from the SiC(0001) surfa

APA, Harvard, Vancouver, ISO, and other styles

5

Baier, Anne Kathrin [Verfasser], Dietrich [Akademischer Betreuer] Knorr, Dietrich [Gutachter] Knorr, and Sascha [Gutachter] Rohn. "Potential of high isostatic pressure and pulsed electric fields for the processing of potato and pea proteins : structural and techno-functional characterization in model solutions and plant tissue / Anne Kathrin Baier ; Gutachter: Dietrich Knorr, Sascha Rohn ; Betreuer: Dietrich Knorr." Berlin : Technische Universität Berlin, 2016. http://d-nb.info/1156186315/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

TERNER, MATHIEU. "Innovative materials for high temperature structural applications: 3rd Generation γ-TiAl fabricated by Electron Beam Melting". Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2527509.

Full text

Abstract:

In the aeronautics industry, the propulsion systems stand among the most advanced and critical components. Over the last 50 years, gas turbine aeroengines were subjected to intensive research to increase efficiency and reduce weight, noise and harmful emissions. Together with design optimization, breakthrough in materials science for structural applications triggered the development of the most advanced gas turbine engines. For low temperatures, basically ahead of the combustion section, lightweight Ti alloys are preferred for their good mechanical properties. For high temperatures instead, Ni

APA, Harvard, Vancouver, ISO, and other styles

7

Blayo, Claire. "Caractérisation de l'interaction protéine-ligand sous l'effet de la pression isisatique ou dynamique : application à l’inclusion de composés hydrophobes dans des nanostructures élaborées à partir de protéines du lait." Thesis, Montpellier 2, 2012. http://www.theses.fr/2012MON20056.

Full text

Abstract:

Résumé : L'interaction entre la β-Lactoglobuline (β-Lg) et le rétinol ou entre les micelles de phosphocaséines (PC) et le rétinol à un pH proche de la neutralité, a été étudiée à pression atmosphérique et sous pression isostatique jusqu'à 400 MPa. Les constantes de dissociation et le nombre de sites de liaison ont été calculés indiquant des différences d'affinité en fonction de la structure protéique. A 25°C, des pressions inférieures à 150 MPa favorisent l'association β-Lgrétinol (rapport molaire β-Lg/rétinol : 1/1). A ≥ 150 MPa le complexe se dissocie. A 350 MPa, la β-Lg est dénaturée et le

APA, Harvard, Vancouver, ISO, and other styles

8

Kim, Duck Young. "Ab initio Lattice Dynamics : Hydrogen-dense and Other Materials." Doctoral thesis, Uppsala universitet, Institutionen för fysik och materialvetenskap, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-9535.

Full text

Abstract:

This thesis presents a theoretical study of materials under high pressure using ab initio lattice dynamics based on density functional theory and density functional perturbation theory using both super-cell and linear response approach. Ab initio lattice dynamics using super-cell approach is applied to compare our theoretical predictions with experimental findings. Phonon dispersion curves of fcc α-γ cerium are calculated and compared with inelastic X-ray scattering data. Pressure dependency of phonon density of states in two cubic phases TiO2 allows us to assign the observed cubic phase in ex

APA, Harvard, Vancouver, ISO, and other styles

9

Franoux, Chloé. "Contribution expérimentale au frottement sec dans les procédés d’hyperdéformation : application au couple cuivre/acier." Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0007.

Full text

Abstract:

La compréhension de propriétés tribologiques dans les procédés de mise en forme est un enjeu important, particulièrement dans les procédés d'hyperdéformation. Dans ces procédés, les matériaux sont soumis à des déformations plastiques sévères sous de faibles vitesses d'avance dans le but d'obtenir des matériaux à grains ultrafins. Certains de ces procédés requièrent un coefficient de frottement important comme le procédé High Pressure Torsion (HPT). Dans d'autre cas, le frottement n'est pas bénéfique comme pour le procédé Equal-Channel Angular Pressing (ECAP) dans lequel il s'oppose au mouvemen

APA, Harvard, Vancouver, ISO, and other styles

10

Biggs, Timothy James. "Studies of crystalline organic molecular materials under extreme conditions." Thesis, University of Oxford, 2006. http://ora.ox.ac.uk/objects/uuid:51dae806-2954-4ea7-a3cb-1980ecb53e98.

Full text

Abstract:

This thesis describes investigations into the properties of -phase BEDT-TTF charge transfer salts. Charge transfer salts are mainly studied as they are very useful test beds for fundamental physics due to the tuneability of their proper- ties and ground states. The effects of temperature and pressure on such systems have been studied, as these allow access to a wide range of different states and properties. Transport properties of these systems have been studied to obtain information about the Fermi surface and effective mass, and the effect of deuter- ation and also change of pressure media w

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "High quasi isostatic pressure"

1

Sanders, William A. Strength of hot isostatically pressed and sintered reaction bonded silicon nitrides containing YÓ. National Aeronautics and Space Administration, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

1946-, Ishizaki Kōzō, Hodge Edwin, and Concannon Michael, eds. Gas pressure effects on materials processing and design: Symposium held December 3-5, 1991, Boston, Massachusetts, U.S.A. Materials Research Society, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sh, Boltachev G., ed. Magnetic pulsed compaction of nanosized powders. Nova Science, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ishizaki, Kozo, and Edwin Hodge. Gas Pressure Effects on Materials Processing and Design: Symposium Held December 3-5, 1991, Boston, Massachusetts, U.S.A. (Materials Research Society Symposium Proceedings). Materials Research Society, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tibaldi, Stefano, and Franco Molteni. Atmospheric Blocking in Observation and Models. Oxford University Press, 2018. http://dx.doi.org/10.1093/acrefore/9780190228620.013.611.

Full text

Abstract:

The atmospheric circulation in the mid-latitudes of both hemispheres is usually dominated by westerly winds and by planetary-scale and shorter-scale synoptic waves, moving mostly from west to east. A remarkable and frequent exception to this “usual” behavior is atmospheric blocking. Blocking occurs when the usual zonal flow is hindered by the establishment of a large-amplitude, quasi-stationary, high-pressure meridional circulation structure which “blocks” the flow of the westerlies and the progression of the atmospheric waves and disturbances embedded in them. Such blocking structures can hav

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "High quasi isostatic pressure"

1

Hayashi, Rikimaru. "Progress of High Pressure use in Food Industry." In Hot Isostatic Pressing— Theory and Applications. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2900-8_79.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hattori, Takeo, Masahiro Yoshimura, and Shigeyuki Sōmiya. "High-Pressure Hot Isostatic Pressing of Synthetic Mica." In Hydrothermal Reactions for Materials Science and Engineering. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-0743-0_76.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hurtado, J. L., P. Montero, and A. J. Borderías. "Influence of High Isostatic Pressure on Muscle of Octopus (Octopus vulgaris)." In Advances in High Pressure Bioscience and Biotechnology. Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-60196-5_92.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Karpinski, J., S. Rusiecki, E. Kaldis, and E. Jilek. "High Oxygen Pressure (PO2≤3000 bar, T≤1200°C) Investigations in the Y2Ba4Cu6+nO14+n Family." In Hot Isostatic Pressing— Theory and Applications. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2900-8_52.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Nomura, Hiroshi, Shinji Nakaya, and Mitsuhiro Tsue. "Microgravity Research on Quasi-Steady and Unsteady Combustion of Fuel Droplet at High Pressures." In High-Pressure Flows for Propulsion Applications. American Institute of Aeronautics and Astronautics, Inc., 2020. http://dx.doi.org/10.2514/5.9781624105814.0001.0048.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Weinstein, B. A., J. G. Tischler, R. J. Chen, H. A. Nickel, Z. X. Hang, and B. D. Mccombe. "Far-Infrared Spectroscopy of Quasi-2D Impurity States in Semiconductor Nanostructures Under High Hydrostatic Pressure." In Frontiers of High Pressure Research II: Application of High Pressure to Low-Dimensional Novel Electronic Materials. Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-0520-3_23.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Karpinski, J., H. Schwer, R. Molinski, et al. "High Pressure Crystal Growth and Properties of Hg-Superconductors and Quasi-One-Dimensional Cuprates." In High-Temperature Superconductors and Novel Inorganic Materials. Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4732-3_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Gunyayev, G. M., S. I. Ilchenko, A. F. Rumyantsev, I. S. Deev, A. A. Ilchenko, and I. V. Pasmor. "Improvement of Strength of Carbon—Epoxy Composite as the Result of Treatment of Prepreg by Isostatic High Pressure." In MICC 90. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3676-1_137.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Thiry, Louis, Long Li, and Etienne Mémin. "Modified (Hyper-)Viscosity for Coarse-Resolution Ocean Models." In Mathematics of Planet Earth. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18988-3_17.

Full text

Abstract:

AbstractWe present a simple parameterization for coarse-resolution ocean models. To replace computationally expensive high-resolution ocean models, we develop a computationally cheap parameterization for coarse-resolution models based solely on the modification of the viscosity term in advection equations. It is meant to reproduce the mean quantities like pressure, velocity, or vorticity computed from a high-resolution reference solution or using observations. We test this new parameterization on a double-gyre quasi-geostrophic model in the eddy-permitting regime. Our results show that the pro

APA, Harvard, Vancouver, ISO, and other styles

10

Jamet, Quentin, Etienne Mémin, Franck Dumas, Long Li, and Pierre Garreau. "Toward a Stochastic Parameterization for Oceanic Deep Convection." In Mathematics of Planet Earth. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-40094-0_6.

Full text

Abstract:

AbstractCurrent climate models are known to systematically overestimate the rate of deep water formation at high latitudes in response to too deep and too frequent deep convection events. We propose in this study to investigate a misrepresentation of deep convection in Hydrostatic Primitive Equation (HPE) ocean and climate models due to the lack of constraints on vertical dynamics. We discuss the potential of the Location Uncertainty (LU) stochastic representation of geophysical flow dynamics to help in the process of re-introducing some degree of non-hydrostatic physics in HPE models through

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "High quasi isostatic pressure"

1

Rhodes, Geoffrey O., John J. Eckenrod, and Frank J. Rizzo. "High Nitrogen Corrosion Resistant Austenitic Stainless Steels Made by Hot Isostatic Compaction of Gas Atomized Powder." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96416.

Full text

Abstract:

Abstract A model has been developed to design austenitic stainless steels containing 25 to 28% chromium, 22% nickel, 6% manganese, 4 to 8% molybdenum, and about 0.80% nitrogen. The newly developed steels have been produced by rapid solidification powder metallurgy (P/M) with subsequent consolidation by hot isostatic pressing (HIP). The resulting chemical compositions meet the criteria of the alloy design model, predicting a fully austenitic microstructure, a yield strength of about 620 MPa, a minimum Pitting Resistance Equivalence (PRE) number of 50, a sigma solvus temperature of less than 123

APA, Harvard, Vancouver, ISO, and other styles

2

Mariappan, Murugesan, Mototaka Ochi, and Takafumi Fukushima. "High-Quality $\text{Cu} \mu$-Joints by High-Throughput Contactless Hot-Isostatic-Pressure (HIP) Annealing for Chip-To-Wafer and Wafer-To-Wafer Hybrid Bonding." In 2025 IEEE 75th Electronic Components and Technology Conference (ECTC). IEEE, 2025. https://doi.org/10.1109/ectc51687.2025.00325.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

"High Pressure Heat Treatment - Phase Transformation under Isostatic Pressure in HIP." In Hot Isostatic Pressing. Materials Research Forum LLC, 2019. http://dx.doi.org/10.21741/9781644900031-21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Beamer, C. "Use of High-Pressure Heat Treatment (HPHTTM) for L-PBF F357." In Hot Isostatic Pressing. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902837-9.

Full text

Abstract:

Abstract. Recent advancements in hot isostatic pressing (HIP) equipment now offer the ability to integrate HIP and heat treatment in the HIP furnace with the aid of controllable high-speed cooling and in-HIP quenching. This approach not only offers improvement in productivity but provides a path to prevent anomalies during heat treatment including thermally induced porosity (TIP) and part quench cracking or distortion. This manuscript will cover the approach of High Pressure Heat Treatment (HPHTTM) applied to SLM Solutions laser powder bed fusion (L-PBF) printed high strength aluminum alloy F3

APA, Harvard, Vancouver, ISO, and other styles

5

Wu, Z. "Preparation of High-Quality Mo-Nb (Ti/Ni-Ti) Sputtering Target by Hot Isostatic Pressing." In Hot Isostatic Pressing. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902837-17.

Full text

Abstract:

Abstract. Mo-Nb, Mo-Ti, Mo-Ni-Ti sputtering target samples were prepared using Mo powder, Nb powder,Ni powder and Ti powder as raw materials by hot isostatic pressing (near net forming). The density, phase composition, microstructure and element distribution of Mo-Nb, Mo-Ti, Mo-Ni-Ti sputtered target samples were measured by optical microscope, scanning electron microscope and energy dispersive spectrometer. The experimental results show that hot isostatic pressing can prepare Mo-Nb target at lower temperature, and the obtained samples have finer grains, higher density and more uniform element

APA, Harvard, Vancouver, ISO, and other styles

6

Ahlfors, Magnus. "High Pressure Heat Treatment of AM Parts—Combining HIP and Heat Treatment." In HT2019. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.ht2019p0011.

Full text

Abstract:

Abstract Hot Isostatic Pressing (HIP) has been used for several decades within different industries for a wide variety of applications [1]. During the recent years HIP has become an important post process for metal additive manufacturing (AM) to secure material performance and quality. The HIP process uses a high isostatic pressure and elevated temperature to densify additively manufactured material by eliminating internal defects. The elimination of defects results in improved material properties such as fatigue, creep, ductility and fracture toughness [2-8]. HIP have historically been used o

APA, Harvard, Vancouver, ISO, and other styles

7

Assis, Julio de, Marcelo Cristianini, and Katiuchia Takeuchi. "Effect of High Isostatic Pressure (HIP) and High Pressure Homogeneization (HPH) on technological properties of Brazil nut-based beverage." In Congresso de Iniciação Científica UNICAMP. Universidade Estadual de Campinas, 2019. http://dx.doi.org/10.20396/revpibic2720192625.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hjarne, Johan, Magnus Ahlfors, and Anders Eklund. "High Pressure Heat Treatment—Optimized Material Properties by HIP." In HT 2017. ASM International, 2017. http://dx.doi.org/10.31399/asm.cp.ht2017p0001.

Full text

Abstract:

Abstract Hot Isostatic Pressing (HIP) is widely used today to eliminate internal defects in components to achieve improved material properties like ductility and fatigue. With today’s modern HIP systems there are possibilities to incorporate more process steps into the HIP process. These process steps can be stress relief, solutionizing, quenching, ageing, tempering etc. performed in the same equipment during the same cycle which makes a very effective process route. This presentation will focus on the possibilities to perform solutionizing and quench directly in the HIP system for a typical Q

APA, Harvard, Vancouver, ISO, and other styles

9

Blank, V. D. "Structure and field emission of C-N nanofibers, formed in High Isostatic Pressure Apparatus." In MOLECULAR NANOSTRUCTURES: XVII International Winterschool Euroconference on Electronic Properties of Novel Materials. AIP, 2003. http://dx.doi.org/10.1063/1.1628075.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Preussner, Brian D., Joseph A. Nenni, and Vondell J. Balls. "An Overview of Risk Management Planning for Hot-Isostatic Pressure Treatment of High-Level Waste Calcine for the Idaho Cleanup Project." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78150.

Full text

Abstract:

The Calcine Disposition Project (CDP) of the Idaho Cleanup Project (ICP) has the responsibility to retrieve, treat, and dispose of the calcine stored at the Idaho Nuclear Technology and Engineering Center (INTEC) located at the Idaho National Laboratory. Calcine is the granular product of thermally treating, or calcining liquid high-level waste (HLW) that was produced at INTEC during the reprocessing of spent nuclear fuel (SNF) to recover uranium. The CDP is currently designing the Hot Isostatic Pressure (HIP) treatment for the calcine to provide monolithic, glass-ceramic waste form suitable f

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "High quasi isostatic pressure"

1

McCorkle, D. L., and L. G. Christophorou. Interaction of slow electrons with high-pressure gases (`Quasi-liquids`); synthesis of our knowledge on slow electron-molecule interactions; Final progress report, March 15, 1986--August 14, 1987. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/140939.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lever, James, Austin Lines, Susan Taylor, Garrett Hoch, Emily Asenath-Smith, and Devinder Sodhi. Revisiting mechanics of ice–skate friction : from experiments at a skating rink to a unified hypothesis. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42642.

Full text

Abstract:

The mechanics underlying ice–skate friction remain uncertain despite over a century of study. In the 1930s, the theory of self-lubrication from frictional heat supplanted an earlier hypothesis that pressure melting governed skate friction. More recently, researchers have suggested that a layer of abraded wear particles or the presence of quasi-liquid molecular layers on the surface of ice could account for its slipperiness. Here, we assess the dominant hypotheses proposed to govern ice– skate friction and describe experiments conducted in an indoor skating rink aimed to provide observations to

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!