Log in

Relevant bibliographies by topics / High-Turning / Dissertations / Theses

To see the other types of publications on this topic, follow the link: High-Turning.

Dissertations / Theses on the topic 'High-Turning'

Author: Grafiati

Published: 4 June 2021

Last updated: 16 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'High-Turning.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Mitrofanov, Alexander. "Modelling the ultrasonically assisted turning of high-strength alloys." Thesis, Loughborough University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.412982.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Xu, Runsong. "VOLUTE AND DIFFUSER PERFORMANCE ANALYSIS FOR HIGH TURNING TURBINE STSTEM." MSSTATE, 2002. http://sun.library.msstate.edu/ETD-db/theses/available/etd-07122002-134859/.

Full text

Abstract:

Test results from a rocket turbine test model, called the Oxidizer Technology Turbine Rig (OTTR), are discussed in this paper. The turbine was designed to support the development of advanced turbines for future liquid rocket engines. It is a highly loaded single stage liquid oxygen pump drive turbine which uses inlet and exit volutes to provide optimum performance in a compact configuration. The system design creates high pressure and temperature gradients as well as high Mach number flow. These factors make it especially difficult to accurately measure the flowfield. Test issues such as probe

APA, Harvard, Vancouver, ISO, and other styles

3

Xu, Runsong. "Volute and diffuser performance analysis for high turning turbine system." Master's thesis, Mississippi State : Mississippi State University, 2002. http://library.msstate.edu/etd/show.asp?etd=etd-07122002-134859.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Monesi, Roberto. "Homeorhetic assemblies: turning beehive formation dynamics into high-res tectonics." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/10115/.

Full text

Abstract:

Homeorhetic Assemblies indaga le potenzialità tettoniche ed architettoniche derivanti dallo studio dei sistemi biologici decentralizzati, dei loro comportamenti e delle relazioni dinamiche con la colonia in termini di processi adattativi e costruttivi continui nel tempo. La ragione di questo interesse è radicata nei principi dell’ecologia applicata al design ed alle tecnologie di fabbricazione contemporanee, che vanno al di là della mera imitazione formale: ci si è quindi chiesto come raggiungere una spazialità complessa ed articolata, omogeneità di prestazioni ed una struttura continua cara

APA, Harvard, Vancouver, ISO, and other styles

5

Coor, Gordon T. (Gordon Thomas). "Analysis of the short-turning strategy on high-frequency transit lines." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/42587.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Song, Bo. "Experimental and Numerical Investigations of Optimized High-Turning Supercritical Compressor Blades." Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/29727.

Full text

Abstract:

Cascade testing and flow analysis of three high-turning supercritical compressor blades were conducted. The blades were designed at an inlet Mach number (M1) of 0.87 and inlet flow angle of 48.4 deg, with high camber angles of about 55 deg. The baseline blade was a conventional Controlled Diffusion Airfoil (CDA) design and the other two were optimized blades. The blades were tested for an inlet Mach number range from 0.61 to 0.95 and an inlet flow angle range from 44.4 deg to 50.4 deg, at high Reynolds numbers (1.2-1.9x10^6 based on the blade chord). The test results have shown lower losses an

APA, Harvard, Vancouver, ISO, and other styles

7

Ahmed, Naseer. "3D finite element modelling of ultrasonically assisted turning of high strength alloy." Thesis, Loughborough University, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.445374.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hoffman, Eric. "On minimum time six-degree-of-freedom turning maneuvers for a high-alpha fighter aircraft." Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/12449.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Abraham, Santosh. "Aerodynamic Performance of High Turning Airfoils and the Effect of Endwall Contouring on Turbine Performance." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/77196.

Full text

Abstract:

Gas turbine companies are always focused on reducing capital costs and increasing overall efficiency. There are numerous advantages in reducing the number of airfoils per stage in the turbine section. While increased airfoil loading offers great advantages like low cost and weight, they also result in increased aerodynamic losses and associated issues. The strength of secondary flows is influenced by the upstream boundary layer thickness as well as the overall flow turning angle through the blade row. Secondary flows result in stagnation pressure loss which accounts for a considerable portion

APA, Harvard, Vancouver, ISO, and other styles

10

Rakels, Jan Henricus. "An in-process, non-contact surface finish sensor for high quality components generated using diamond turning." Thesis, University of Warwick, 1987. http://wrap.warwick.ac.uk/4156/.

Full text

Abstract:

The object of this Ph.D. project was to design and construct an in-process, non contact surface finish sensor for high quality components generated using diamond turning. For this application the instrument must have the following properties: i rapid acquisition of data. ii capability of measuring translating and or rotating surfaces. iii ruggedness for in-process use. iv insensitivity to moderate vibrations. v remoteness from the surfaces to be measured. The remoteness requirement virtually excludes the otherwise ubiquitous stylus instrument, while the rapid gathering of data from rotating su

APA, Harvard, Vancouver, ISO, and other styles

11

Tamil, Alagan Nageswaran. "Textured insert for improved heat extraction in combination with high-pressure cooling in turning of superalloys." Licentiate thesis, Högskolan Väst, Avdelningen för avverkande och additativa tillverkningsprocesser (AAT), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-11738.

Full text

Abstract:

Heat generated in a machining process is a common and critical obstacle faced in today's machining industries. The heat generated in the cutting zone has a direct negative influence on the tool life which, in turn contributes to increase the manufacturing costs. Especially, in machining of Heat Resistant Super Alloys, HRSA this is a very limiting factor. HRSA are capable of retaining their mechanical strength and hardness at elevated temperatures. This property is advantageous in the application in e.g. aero-engines but also a disadvantage, since it also lowers the machinability significantly.

APA, Harvard, Vancouver, ISO, and other styles

12

Sweeten, Gary Allen. "Causal Inference with group-based trajectories and propensity score matching is high school dropout a turning point? /." College Park, Md. : University of Maryland, 2006. http://hdl.handle.net/1903/3504.

Full text

Abstract:

Thesis (Ph. D.) -- University of Maryland, College Park, 2006.<br>Thesis research directed by: Criminology and Criminal Justice. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.

APA, Harvard, Vancouver, ISO, and other styles

13

Micaroni, Ricardo. "Influencia do fluido de corte sob pressão no torneamento do aço ABNT 1045." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265586.

Full text

Abstract:

Orientador: Anselmo Eduardo Diniz<br>Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica<br>Made available in DSpace on 2018-08-07T07:00:53Z (GMT). No. of bitstreams: 1 Micaroni_Ricardo_D.pdf: 2196403 bytes, checksum: 4db1f057fa92acc55a6677b56f01f72d (MD5) Previous issue date: 2006<br>Resumo: Na usinagem dos metais, a aplicação do fluido de corte otimizada é um recurso que pode aumentar a taxa de remoção de material. Dentre os beneficios pode-se citar a redução da temperatura da ferramenta e melhor formação dos cavacos. Na primeira fase deste trabalho foi e

APA, Harvard, Vancouver, ISO, and other styles

14

Anderson, Whitney Allison. "“You’re Not Part of the Family”: Understanding the Turning Points and Family System Consequences of High Conflict Mother-/Daughter-in-Law Relationships." Diss., North Dakota State University, 2016. http://hdl.handle.net/10365/25667.

Full text

Abstract:

Popular culture representations of in-law relationships are frequently negative, and research has affirmed the communication difficulties associated with these non-kin, nonvoluntary relationships. Mother-in-law/daughter-in-law (MIL/DIL) relationships face unique challenges, as these women compete for the position of “kinkeeper,” or the person who manages relationships throughout the family. When MIL/DIL relationships are characterized by conflict and negative feelings toward one another, the family system suffers. To better understand the implications of “high conflict” MIL/DIL relationships o

APA, Harvard, Vancouver, ISO, and other styles

15

Anderson, Whitney Allison. "?You?re Not Part of the Family?: Understanding the Turning Points and Family System Consequences of High Conflict Mother-/Daughter-in-Law Relationships." Diss., North Dakota State University, 2016. http://hdl.handle.net/10365/25667.

Full text

Abstract:

Popular culture representations of in-law relationships are frequently negative, and research has affirmed the communication difficulties associated with these non-kin, nonvoluntary relationships. Mother-in-law/daughter-in-law (MIL/DIL) relationships face unique challenges, as these women compete for the position of ?kinkeeper,? or the person who manages relationships throughout the family. When MIL/DIL relationships are characterized by conflict and negative feelings toward one another, the family system suffers. To better understand the implications of ?high conflict? MIL/DIL relationships o

APA, Harvard, Vancouver, ISO, and other styles

16

Halvarsson, Marie, and Victoria Friberg. "Att välja till och från gymnasiet : En studie av elever mellan gymnasium och arbetsliv." Thesis, Stockholms universitet, Institutionen för pedagogik och didaktik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-90517.

Full text

Abstract:

Att välja till och från gymnasiet, är en studie om valet av gymnasieutbildning och studie- och/eller yrkesvalet efter gymnasiet. Gymnasievalet och det eftergymnasiala valet är två viktiga vändpunkter i människors liv. Syftet med studien är att undersöka gymnasieelevernas föreställningar och planer om framtiden från gymnasievalet till sista terminen i gymnasiet. Kvalitativ forskningsmetod har använts och det gymnasieprogram vi undersökt är Naturvetarprogrammet. Resultatet visar tydligt att valet av det naturvetenskapliga programmet har sin grund i den bredd och öppning av möjligheter som utbild

APA, Harvard, Vancouver, ISO, and other styles

17

Salazar, Carlos Eddy Valdéz. "Avaliação através da inspeção magnética da condição superficial de anéis de rolamento de aço DIN 100Cr6 após torneamento duro a seco." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/3/3151/tde-11052009-174233/.

Full text

Abstract:

O presente trabalho visa apresentar informações que viabilizem a fabricação de componentes de rolamentos com limites superiores de resistência à fadiga, com a intenção de proporcionar uma vida útil maior ao rolamento, e, também, a otimização da fabricação das peças, dispensando em alguns casos o processo final e usual de retificação, o que implica uma redução de custos. As motivações deste estudo são a geração de altas tensões residuais compressivas no torneamento duro-seco a altas velocidades, a aplicação do RMB como técnica de medição das tensões residuais em aço 100CrMn6 e a otimização da q

APA, Harvard, Vancouver, ISO, and other styles

18

Kinc, Jiří. "Využití vysokotlakého chlazení na dlouhotočných automatech." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231129.

Full text

Abstract:

The thesis describe high-pressure cooling system and present experiment, when is using this cooling technology for turning cylindrical workpiece to long-turn machines. Workpiece manufactured using high-pressure cooling system is compares with Workpiece manufactured using low-pressure cooling system. Results are analyzed, evaluated and plotted in a single graphical relationships. The thesis is completed the analysis, discussion and recommendations regarding the using of high-pressure cooling.

APA, Harvard, Vancouver, ISO, and other styles

19

Blunt, Rory Alexander Fabian. "A Study of the Effects of Turning Angle on Particle Deposition in Gas Turbine Combustor Liner Effusion Cooling Holes." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1460735904.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Kubela, Petr. "Analýza tvorby třísky pomocí digitální vysokorychlostní kamery." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228890.

Full text

Abstract:

In live we often involve monitoring of very fast actions, that are not observable by the human eye. The thesis focuses on possibilities of high speed digital cameras, their application in industry, and the mechanism of chip formation. The experiment part aims to record the chosen process of chip machining and the problems of necessary illumination during the process of object imaging.

APA, Harvard, Vancouver, ISO, and other styles

21

Tropp, Pavel. "Vysokorychlostní obrábění ložisek z materiálu 100Cr6." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231982.

Full text

Abstract:

This Master's thesis deals with the issue of high-speed turning of the 100Cr6 material. The aim is to identify and experimentally validate an innovative production process for a particular component. The thesis includes theoretical basis of high-speed machining, analysis of the current state of the manufacturing process, innovation design and experimental verification. At the end of the thesis, parameters of the machined surfaces of specimens are evaluated.

APA, Harvard, Vancouver, ISO, and other styles

22

Baron, Yoann. "Určení řezných podmínek pro výrobu vybraných leteckých součástí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231740.

Full text

Abstract:

Tato práce obsahuje přehled superslitin na bázi niklu, jejich obrábění za vysokého tlaku chladicí kapaliny, týká se také metod optimalizace pro tento typ obrábění a následné analýzy opotřebení nástroje. Tato studie byla vytvořena ve spolupráci se společností Safran, experimentální část byla zrealizována ve výrobním závodě Evry-Corbeil ve Francii. Experimentální část práce se týká optimalizace řezných podmínek pro vnitřní hrubovací soustružení součástí pro letecký průmysl za vysokého tlaku chladicí kapaliny. Cíle práce byly následující: srovnání rozdílných vyměnitelných břitových destiček dodan

APA, Harvard, Vancouver, ISO, and other styles

23

Sudo, Tadeu Tomio. "Uma contribuição ao estudo do torneamento com alta velocidade." Universidade de São Paulo, 2001. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-15032016-134826/.

Full text

Abstract:

O material, metálico ferro fundido cinzento, é muito utilizado industrialmente, principalmente na área automobilística. Usinagem com alta velocidade tem sido uma tendência atual para aumentar a produtividade, com a possibilidade de se ober ótima qualidade superficial, possivelmente eliminando processos subseqüentes. Aliado à questão de qualidade ambiental, as operações de usinagem têm-se voltado para usinagem a seco ou com mínima quantidade de lubrificante (MQL - minimal quantity of lubricant). Este trabalho estuda o torneamento com alta velocdidade de ferro fundido cinzento GG25 através de us

APA, Harvard, Vancouver, ISO, and other styles

24

Liu, Ching-wan Cherry. "Turning refusal to acceptance via IT staff development initiatives." Click to view the E-thesis via HKUTO, 2003. http://sunzi.lib.hku.hk/hkuto/record/B4004032X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Tichý, Vojtěch. "Analýza tvorby třísky pomocí digitální vysokorychlostní kamery." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231991.

Full text

Abstract:

This thesis covers matters related to high-speed digital cameras and their usage in various spheres of human activities, mainly in research of chip forming. Thesis summarises important knowledge needed for creation of high-speed recordings and choice of suitable lenses. Focus is taken on creation of high-speed recordings of chip forming process in turning operation outside grooving by using of different types of chipformers. Main goal is to verify its functionality in specific value range of feed per revolution.

APA, Harvard, Vancouver, ISO, and other styles

26

Liu, Ching-wan Cherry, and 廖靜雲. "Turning refusal to acceptance via IT staff development initiatives." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B4004032X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Caccialupi, Alessandro. "Systems development for high temperature, high strain rate material testing of hard steels for plasticity behavior modeling." Thesis, Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-04082004-180051/unrestricted/caccialupi%5Falessandro%5F200312%5Fms.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Haddad, Fares. "Etude de l'influence de la structure métallurgique sur l'usinabilité des aciers à hautes caractéristiques mécaniques." Thesis, Paris, HESAM, 2020. http://www.theses.fr/2020HESAE003.

Full text

Abstract:

Durant la dernière décennie, le développement de nouvelles nuances d'acier à très haute résistance a connu un essor, en particulier dans l’automobile. Les acteurs de ce secteur ont pour objectif de produire des véhicules plus légers, plus performants, plus économes en carburant et garantissant un plus haut niveau de sécurité pour les passagers. De nouvelles nuances ou de nouvelles structures sont apparues sur le marché : plus résistants avec un meilleur compromis résistance/ductilité. Cependant cette élévation des propriétés mécaniques se fait le plus souvent au détriment de l’usinabilité des

APA, Harvard, Vancouver, ISO, and other styles

29

Toledo, García Gustavo A. "High temperature compression testing of hardened steels for plasticity behavior modeling." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/16909.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Wolf, Jason. "INVESTIGATION OF CHIP-FORM AND TOOL-WEAR IN TURNING OF HARDENED AF9628 ALLOY UNDER VARIOUS COOLING AND LUBRICATION CONDITIONS." UKnowledge, 2019. https://uknowledge.uky.edu/ms_etds/10.

Full text

Abstract:

Next generation defense and commercial applications for structural steels require new alloys that eliminate or reduce critical elements from their composition to lower cost and improve manufacturability, while maintaining or exceeding high strength and toughness requirements. A new alloy, denoted as AF9628, has recently been developed for this purpose and its manufacturing characteristics and the material response in component manufacturing must be fully understood. In the present study, hardened AF9628 alloy was turned with a coated carbide cutting tool under fixed cutting speed, feed rate, a

APA, Harvard, Vancouver, ISO, and other styles

31

Sayi, Mbani T. "High Accuracy Fitted Operator Methods for Solving Interior Layer Problems." University of the Western Cape, 2020. http://hdl.handle.net/11394/7320.

Full text

Abstract:

Philosophiae Doctor - PhD<br>Fitted operator finite difference methods (FOFDMs) for singularly perturbed problems have been explored for the last three decades. The construction of these numerical schemes is based on introducing a fitting factor along with the diffusion coefficient or by using principles of the non-standard finite difference methods. The FOFDMs based on the latter idea, are easy to construct and they are extendible to solve partial differential equations (PDEs) and their systems. Noting this flexible feature of the FOFDMs, this thesis deals with extension of these metho

APA, Harvard, Vancouver, ISO, and other styles

32

Wilund, Lina. "The crime in “turning a car from a tool for getting somewhere into a tool for unmistakably being somewhere.” : En hot spots-analys av hög och störande musik från fordon." Thesis, Högskolan i Gävle, Avdelningen för socialt arbete och kriminologi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-33403.

Full text

Abstract:

I den här kvantitativa GIS studien har spatiala och temporala koncentrationer/hot spots gällande hög och störande musik från fordon studerats i syfte att undersöka dessa platsers kriminogenitet och gemensamma miljömässiga karaktär samt den sociala kontext som kan vara kopplat till problemet. Studiens resultat visade på tre stabila hot spots men att dessa inte gällde för övrig brottslighet. Platserna kunde därför inte bedömas som kriminogena utom gällande den störande musiken från fordon. Det gemensamma för dessa platser visades vara närheten till genomfartsleder, parkeringsplatser och bensinpu

APA, Harvard, Vancouver, ISO, and other styles

33

Šťastný, Radek. "Studie odpočívky a velkokapacitního záchytného parkoviště pro TIR na dálnici D1." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225916.

Full text

Abstract:

The task of my diploma work is the study of the parking area on the motorway D1 near Vyškov. This place will be connected with the motorway D1 between the present exit Vyškov – West (226) and Vyškov – East (230/1) in the direction to Kroměříž. The parking area (the parking place, the petrol station, the restaurant) and the truckpark will be designed with the reason of the high intensity of cars and lorries on the motorway D1 and with the reason of the lack of the parking places for the lorries.

APA, Harvard, Vancouver, ISO, and other styles

34

Ho, Chung-Lung, and 何俊龍. "Compensation Control of Thermal Deformation on A High Precision Turning Center." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/80391177723257468606.

Full text

Abstract:

碩士<br>國立中興大學<br>機械工程學系<br>86<br>The reduction of the thermal errors of a CNC machining Center isthe major work in this research. However, the purpose of producingthe accuracy products and increase the machine value are conducted at last. The evidence shows 40 to 70% of total error are caused by machine''''s thermal drift. It is important to develop a method to fill the thermal drift, which associated with a changing temperature distribution within the structural loop due to internal an

APA, Harvard, Vancouver, ISO, and other styles

35

Tsai, Yaw-Yang, and 蔡曜陽. "Study of Tool Failure in Turning of High Hardness Alloy Steels." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/56323491159880540111.

Full text

Abstract:

碩士<br>國立臺灣大學<br>機械工程研究所<br>81<br>High hardness alloy steels have usually been machinied by grind- ing owing to its difficult-to-cut properties. However, there are many limitations in grinding ,such as production process ,cost, work geometry and so on. Hence,machining of hard work materials with ceramic and ultrahard tools is another manufacture concept that can eliminate grinding and save both time and cost. The ob- jectives of this study are to investigate the influences of hard- ness and

APA, Harvard, Vancouver, ISO, and other styles

36

Chang, Kai-Sheng, and 張楷笙. "High Entropy Alloys Film Deposited to Improve Turning Performance for Interrupted Cutting." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/68349144021722089526.

Full text

Abstract:

碩士<br>龍華科技大學<br>機械工程系碩士班<br>104<br>Since the pioneering work of Professor Yeh (1995, Taiwan), high entropy alloys provided higher mixing entropies than traditional alloys as compared in the random solid solution state. It has been application for further improving the performance. In this study, the (AlCrNbSiTiV)N coatings deposited by reactive magnetron sputtering (DCMS) from a single AlCrNbSiTiV target were investigated to strengthen the mechanism. Taguchi method was used for executing the experiment, employing a generic signal-to-noise (S/N) ratio to quantify the present variation. The film

APA, Harvard, Vancouver, ISO, and other styles

37

LI, ANG-YE, and 李昂謁. "Using CBN Tool for High Speed Steel Tailstock ThimbleOptimization of machining parameters during turning." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/mmv848.

Full text

Abstract:

碩士<br>修平科技大學<br>精密機械與製造科技碩士班<br>106<br>In this study, a series of experiments were conducted on the surface machining of high-speed steel tailstock thimble using cutting fluid or no cutting fluid in the turning process. And the spindle rotation speed, feed rate, cutting depth, cutting fluid usage as processing conditions parameters, to observe its processing surface quality. Response surface methodology (RSM) was used to generate second-order mathematical models and to explain the interplay between the turning parameters and the processing quality characteristics. The results show that the mos

APA, Harvard, Vancouver, ISO, and other styles

38

Chang, Chia-hao, and 張家豪. "Self-Narrative As an Athlete Turning to Basketball Coach from High School to College." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/89740049240634570859.

Full text

Abstract:

碩士<br>國立臺灣師範大學<br>體育學系在職進修碩士班<br>100<br>Needless to say, basketball extreme call for cooperation. The operation of a basketball team will not complete without ideal interaction of all the team members and a professional coach. From high school to college, professional to amateur, every coach has his own attitude and it also varies with the nature of his team. A basketball coach needs specialized acknowledgement, great vision for the future of the team, inspiration for the members, strong self –identity and huge ambition. Thus a basketball coach is not merely a position but a role has his uniqu

APA, Harvard, Vancouver, ISO, and other styles

39

Lin, Yu-Xuan, and 林宇璿. "A Study of High-entropy Alloys (AlCrNbSiTiV)N Thin Films to Enhance Turning Tool Performance." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/q3jmd4.

Full text

Abstract:

碩士<br>龍華科技大學<br>機械工程系碩士班<br>106<br>In this study, we used high power impulse magnetron sputtering (HIPIMS) by AlCrNbSiTiV target, and used nitrogen gas was reaction gas, then deposited a high-entropy alloy (AlCrNbSiTiV)N nitride film on a cermet tool (TNMG160404R-UM T1200A), SUS304 stainless steel and Soda glass. We discussed the ratio of nitrogen to argon (0, 5, 10, 15, 20%), sputtering power (120, 150, 180, 210, 240 W), substrate temperature (100, 150, 200, 250, 300, 350, 400℃) influence the mechanical properties and microstructure of (AlCrNbSiTiV)N films. The SEM surface morphology analysis

APA, Harvard, Vancouver, ISO, and other styles

40

CHANG, CHE-HSIANG, and 張哲祥. "Study on the Optimum Process Parameters of Technical High School Thread Turning by Taguchi Method." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/xayj2g.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>工業教育與技術學系<br>108<br>The purpose of this thesis is to explore the optimum process parameters for low carbon steel, aluminum alloy and medium carbon steel materials in the technical high school mechanical outer triangle thread turning practice course. The theory of Taguchi method applies on the technical high school mechanical thread turning related teaching materials to find the cutting factor, get the best combination of parameters and carry out cutting verification to understand whether the surface roughness of the finished workpiece meets the standard. Finally, we also prov

APA, Harvard, Vancouver, ISO, and other styles

41

Halfmann, Eric. "On the Machining Dynamics of Turning and Micro-milling Processes." Thesis, 2012. http://hdl.handle.net/1969.1/ETD-TAMU-2012-08-11416.

Full text

Abstract:

Excessive vibrations continue to be a major hurdle in improving machining efficiency and achieving stable high speed cutting. To overcome detrimental vibrations, an enhanced understanding of the underlying nonlinear dynamics is required. Cutting instability is commonly studied through modeling and analysis which incorporates linearization that obscures the true nonlinear characteristics of the system which are prominent at high speeds. Thus to enhance cutting dynamics knowledge, a comprehensive nonlinear turning model that includes tool-workpiece interaction is experimentally validated usin

APA, Harvard, Vancouver, ISO, and other styles

42

Chukaluri, Eswar Kumar [Verfasser]. "A contribution to turning-on behavior of high voltage optically and electrically triggered thyristors / from Eswar Kumar Chukaluri." 2009. http://d-nb.info/1003250947/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Conti, Eric. "Turning experience into expertise : a multiple case-study analysis of school districts aligning teacher compensation with high performance /." 2000. http://www.library.wisc.edu/databases/connect/dissertations.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Lei, Jiang 1980. "Heat Transfer in Rectangular Channels (AR=2:1) of the Gas Turbine Blade at High Rotation Numbers." Thesis, 2011. http://hdl.handle.net/1969.1/150950.

Full text

Abstract:

Gas turbine blade/vane cooling is obtained by circulating the high pressure air from compressor to the internal cooling passage of the blade/vane. Heat transfer and cooling effect in the rotating blade is highly affected by rotation. The typical rotation number for the aircraft engine is in the range of 0~0.25 and for the land based power generation turbine in the range of 0~05. Currently, the heat transfer data at high rotation numbers are limited. Besides, the investigation of heat transfer phenomena in the turn region, especially near hub portion is rare. This dissertation is to study the h

APA, Harvard, Vancouver, ISO, and other styles

45

張自成. "The study on the Learning of Awarded Students and the Teaching Strategies of Teachers in National Industry-Related Skills Competition of High School Students-the Example of Turning." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/73676020996963838776.

Full text

Abstract:

碩士<br>國立彰化師範大學<br>工業教育與技術學系<br>97<br>Abstract This study aims to explore the technique learning of the awarded students and the influence of the teachers’ teaching strategies on the students’ learning efficiency in national industry-related technique competition of high school students in order to understand the elements of learning efficiency affecting students’ technique. The study focuses on the example of turning. By selecting 4 teachers and 4 awarded students of national industry-related technique competition of high school in 2007, the criteria of contestant selecting, the personality t

APA, Harvard, Vancouver, ISO, and other styles

46

Кучин, С. Г., та S. G. Kuchin. "Повышение точности формообразующих перемещений при высокоскоростном точении : магистерская диссертация". Master's thesis, 2016. http://hdl.handle.net/10995/41093.

Full text

Abstract:

Цель работы – разработка новых технических средств повышения точности формообразующих перемещении металлорежущих станков при высокоскоростном точении. Проведен анализ погрешностей влияющих на точность формообразующих перемещений станка при высокоскоростном точении, анализ существующих способов компенсации погрешностей. На его основе разработаны устройство согласования формообразующих перемещений рабочих органов станков, устройство для компенсации износа направляющих и инструмента металлорежущего станка, устройство компенсации износа элементов металлорежущего станка. Данные устройства точнее с

APA, Harvard, Vancouver, ISO, and other styles

47

"Turning Points: Improving Honors Student Preparation for Thesis Completion." Doctoral diss., 2012. http://hdl.handle.net/2286/R.I.14586.

Full text

Abstract:

abstract: This dissertation is an action research study that had as its primary goal to increase retention of honors college students at Arizona State University by implementing an additional advising session during the fifth semester of their academic career. Introducing additional, strategically-timed support for the honors thesis and demystifying the thesis project was intended to help honors college students make more successful transitions to the final stage of their undergraduate honors careers. This advising session is not only used to demystify the thesis/creative project, but to intro

APA, Harvard, Vancouver, ISO, and other styles

48

Чепусова, Е. Ю., та E. Y. Chepusova. "Повышение точности и быстродействия приводов подач при высокоскоростной токарной обработке : магистерская диссертация". Master's thesis, 2016. http://hdl.handle.net/10995/41091.

Full text

Abstract:

Цель работы – разработка новых технических средств повышения точности и быстродействия приводов подач металлорежущих станков при высокоскоростном точении. Проведен анализ погрешностей собственно привода и системы отсчета перемещений, анализ существующих способов борьбы с погрешностями. На его основе разработаны следящий привод подачи металлорежущего станка, система отсчета перемещений рабочего органа машины, методика настройки системы отсчета перемещений рабочего органа станка и алгоритм настройки компенсирующей цепи системы отсчета перемещений с использованием ПК. Данные средства точнее суще

APA, Harvard, Vancouver, ISO, and other styles

49

"Understanding Romantically Intimate Relational Escalation and De-escalation Among High Functioning Individuals Possessing an Autism Spectrum Disorder." Master's thesis, 2016. http://hdl.handle.net/2286/R.I.38627.

Full text

Abstract:

abstract: Romantic relationships are an important aspect of anyone's life. For individuals with an autism spectrum disorder, this is true as well. However, these people may experience relational dynamics and trajectories that are in some aspects either similar to or markedly different from those who are not on the spectrum. There are very few studies analyzing and understanding how adults with an ASD navigate romantic relationships. This particular study examined how turning points pertaining to relational escalation or de-escalation were recognized and understood by eight individuals (four me

APA, Harvard, Vancouver, ISO, and other styles

50

Ingham, Sue. "Turning the tables : students mentoring teachers in ICT professional development. A dissertation in partial fulfilment of the requirements for the degree of Master of Educational Management, Unitec Institute of Technology [i.e.Unitec New Zealand] /." Diss., 2008. http://www.coda.ac.nz/cgi/viewcontent.cgi?article=1012&context=unitec_educ_di.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!