To see the other types of publications on this topic, follow the link: Highly transparent films.

Dissertations / Theses on the topic 'Highly transparent films'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Highly transparent films.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Book, Martin. "Magnetron sputtering of highly transparent p-conductive NiO thin films." Thesis, Uppsala universitet, Solcellsteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-423322.

Full text
Abstract:
P-type transparent conductors are needed for a wide range of applicationssuch as solar cells and electrochromic smart windows. Solar power is animportant form of energy in today’s society as the threat of global warmingpushes the world towards fossil free energy. Hence a lot of solar cell typeshave been developed, among them tandem cells which are to different typesof solar cells stacked on top of each other. If one of the cells is based ona perovskite, a transparent p-type thin film electrode is needed as a holeconductor and electron blocking layer between the two cells. Nickel oxide(NiO) is
APA, Harvard, Vancouver, ISO, and other styles
2

Vashchuk, Alina, Sviatoslav Motrunich, and Maksym Iurzhenko. "Thermally induced chemical welding of epoxy-based films." Thesis, National Aviation University, 2021. https://er.nau.edu.ua/handle/NAU/50610.

Full text
Abstract:
1. Vakulenko I.O. Influence of chemical compounds on the forming of welding arc / I.O. Vakulenko, S.O. Plitchenko, D.M. Makarevich // Science and transport progress. – 2014. - №5. – Р. 92-100<br>Chemical welding is a relatively new welding approach resulting from chemical reactions that occur at the interface opens the way towards assembly epoxybased materials without adhesives or molds<br>Хімічне зварювання є відносно новим підходом до зварювання, який базується на хімічних реакціях, які перебігають на межі розділу фаз, і відкриває можливість монтажу епоксидних матеріалів без клеїв та форм
APA, Harvard, Vancouver, ISO, and other styles
3

Aghaei-Ghareh-Bolagh, Behnaz. "Development of elastic biomaterials as high performance candidates for tissue engineering applications." Thesis, The University of Sydney, 2018. http://hdl.handle.net/2123/18789.

Full text
Abstract:
Tropoelastin is an extracellular matrix protein, which polymerises to form elastin in the body. Due to its distinctive structural, mechanical and biological properties, tropoelastin provides a versatile building block for manufacturing biomaterials applicable to tissue engineering. Silk fibroin is a fibrous protein that has been widely used in biomedical applications because of its strength and durability. Hybrid protein polymers comprised of recombinant human tropoelastin and silk fibroin have favourable characteristics as implantable scaffolds in terms of mechanical and biological properties
APA, Harvard, Vancouver, ISO, and other styles
4

Gayam, Sudhakar R. "High resistivity zinc stannate as a buffer layer in cds/cdte solar cells." [Tampa, Fla.] : University of South Florida, 2005. http://purl.fcla.edu/fcla/etd/SFE0001061.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Chang, Max Kneiß, Friedrich-Leonhard Schein, Michael Lorenz, and Marius Grundmann. "Room-temperature domain-epitaxy of copper iodide thin films for transparent CuI/ZnO heterojunctions with high rectification ratios larger than 109." Universitätsbibliothek Leipzig, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-205875.

Full text
Abstract:
CuI is a p-type transparent conductive semiconductor with unique optoelectronic properties, including wide band gap (3.1 eV), high hole mobility (>40 cm2 V−1 s−1 in bulk), and large room-temperature exciton binding energy (62 meV). The difficulty in epitaxy of CuI is the main obstacle for its application in advanced solid-state electronic devices. Herein, room-temperature heteroepitaxial growth of CuI on various substrates with well-defined in-plane epitaxial relations is realized by reactive sputtering technique. In such heteroepitaxial growth the formation of rotation domains is observed and
APA, Harvard, Vancouver, ISO, and other styles
6

Kuo, Fang-Ling. "Electrical and Structure Properties of High-κ Barium Tantalite and Aluminum Oxide Interface with Zinc Oxide for Applications in Transparent Thin Film Transistors". Thesis, University of North Texas, 2011. https://digital.library.unt.edu/ark:/67531/metadc84233/.

Full text
Abstract:
ZnO has generated interest for flexible electronics/optoelectronic applications including transparent thin film transistors (TFTs). For this application, low temperature processes that simultaneously yield good electrical conductivity and optical transparency and that are compatible with flexible substrates such as plastic, are of paramount significance. Further, gate oxides are a critical component of TFTs, and must exhibit low leakage currents and self-healing breakdown in order to ensure optimal TFTs switching performance and reliability. Thus, the objective of this work was twofold: (1) de
APA, Harvard, Vancouver, ISO, and other styles
7

Molloy, James. "Argon and argon-chlorine plasma reactive ion etching and surface modification of transparent conductive tin oxide thin films for high resolution flat panel display electrode matrices." Thesis, University of Ulster, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.243741.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bittau, Francesco. "Analysis and optimisation of window layers for thin film CDTE solar cells." Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/32642.

Full text
Abstract:
The work presented in this thesis focuses on the investigation and improvement of the window stack of layers for thin film CdTe solar cells fabricated in the Center for Renewable Energy Systems Technology (CREST) laboratories. In particular the aim was to change the standard structure including TCO, high resistive transparent (HRT)layer and CdS which is limited by the low transparency of the CdS layer, to a better performing one. The first result chapter of the thesis describes the study of ZnO HRT layers. ZnO thin films were deposited by radio frequency (RF) magnetron sputtering with differen
APA, Harvard, Vancouver, ISO, and other styles
9

Loh, Yi Yang Joel. "Highly Transparent Glass using Nanoparticle Films for Enhanced Optoelectronics." Thesis, 2012. http://hdl.handle.net/1807/35524.

Full text
Abstract:
This thesis provides an investigation and review of homogeneous multilayer anti-reflective coatings (ARC) on glass. Recently, numerical optimization has become popular in optimizing the number of layers at a defined wavelength range and at angular incident angles. In this investigation, the design of the index profile is optimized for normal incident angle and angular incident angles by an evolutionary genetic algorithm. The anti-reflective coatings consist of multilayer porous silica or tin oxide nanoparticle films, which are fabricated by mixing 10nm silica nanoparticle or 10nm tin oxide nan
APA, Harvard, Vancouver, ISO, and other styles
10

Wan, Yimao. "Highly transparent and highly passivating Silicon nitride for solar cells." Phd thesis, 2014. http://hdl.handle.net/1885/151507.

Full text
Abstract:
This thesis concerns the optimisation and application of Silicon nitride (SiNx) films for silicon solar cells. Systematic and comprehensive studies of SiNx properties are undertaken to advance (i) the technology of SiNx synthesised by plasma enhanced chemical vapour deposition (PECVD), and (ii) the understanding of recombination at SiNx-passivated silicon surfaces. We examine the film properties of SiNx prepared by a microwave/radio-frequency dual-mode PECVD reactor. It is shown that there is no universal correlation between surface recombination and (i) bulk structural properties such as chem
APA, Harvard, Vancouver, ISO, and other styles
11

Jao, Yu-Chuan, and 饒育全. "Preparation and Characterization of Highly Transparent Epoxy/Inorganic Nanoparticles Hybrid Optical Films." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/03618445883252207051.

Full text
Abstract:
碩士<br>明志科技大學<br>化學工程研究所<br>100<br>In this study, the epoxy/titania (Epoxy/TiO2) hybrid materials were successfully prepared by sol-gel method. The effects of TiO2 content on the properties of hybrid material and the optimum operating conditions for preparing the hybrid films were also investigated. Fourier transform infrared spectrometry (FTIR) spectra showed that the bonding between the epoxy group and TiO2 has been successfully created. Besides, the cross-linking of Ti-O-Ti and Si-O-Ti network was also formed. Differential scanning calorimetry (DSC) analysis indicated that the glass transit
APA, Harvard, Vancouver, ISO, and other styles
12

Kuo, Jay, and 郭明傑. "Low-temperature Wet Chemical Synthesis for Highly Effective Fabrication of Transparent Conductive Oxide Films." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/07468825827476404137.

Full text
Abstract:
碩士<br>逢甲大學<br>材料科學與工程學系<br>102<br>The aim of this study is to employ a low-temperature wet chemical synthesis method, namely chemical bath deposition (CBD), to effectively fabricate indium tin oxide (In2O3:Sn; ITO) thin films as transparent conductive oxide (TCO) films. We have achieved ITO films with very good materials properties through CBD process at 80oC for deposition duration of 2~8 hrs and the post-heat treatment. The essential processing parameters regarding such fabrication of ITO films by CBD route consist of deposition temperature, deposition time, types and concentrations of chemi
APA, Harvard, Vancouver, ISO, and other styles
13

CHEN, PO-HUNG, and 陳柏宏. "Fabrication of highly transparent films with excellent near-infrared shielding properties by wet-coating technique." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/smq59v.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>化學工程與材料工程系<br>105<br>Near infrared (NIR, wavelength: 780~2500 nm) shielding materials have been widely applied in the windows of cars and buildings. In summer, the visible light can pass through the transparent, NIR shielding layers but NIR not. Thus, the heat can’t transfer into the indoor, reducing the energy consumption for air conditions and release of carbon dioxide. In this study, the Cs0.33WO3 nanorods were synthesized by the hydrothermal method and used as NIR shielding materials. The performance of NIR shielding through incorporating polymer into the Cs0.33WO3 layer
APA, Harvard, Vancouver, ISO, and other styles
14

Lee, Pay-yu, and 李培裕. "Highly Transparent ZnO thin films prepared by successive ionic layer adsorption and reaction method (SILAR)." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/40370153605196641799.

Full text
Abstract:
碩士<br>國立臺南大學<br>電機工程研究所<br>99<br>Thin films of zinc oxide were grown by Successive Ionic Layer Adsorption and Reaction, SILAR-method. The experiments were carried out at low temperature and at normal pressure utilizing aqueous conditions. This study concentrated on the topographical evolution of the films as a function of thickness of the films. For this purpose scanning electron microscopy, SEM, as well as various operating modes of atomic force microscopy, AFM, were utilized. In addition, the crystallinity and the composition of the films were studied by X-ray diffraction and X-ray photoelec
APA, Harvard, Vancouver, ISO, and other styles
15

Pan, Bo-Cheng, and 潘博澄. "Preparation and Electrochromic Behavior of Highly Transparent Triarylamine-based Porous Polyamide Films and Their Hybrid Materials." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/xq43gr.

Full text
Abstract:
碩士<br>國立臺灣大學<br>高分子科學與工程學研究所<br>105<br>This study has been separated into four chapters. Chapter 1 is the general introduction. In chapter 2, the porous polyamide films were prepared by the salt and the electrochromic behaviors between dense film and porous film have been investigated. In chapter 3, the electrochromic materials (ECMs) were synthesized and hybrids electrochromic devices (ECDs) were prepared. Chapter 4 is the conclusion. The preparation and electrochromic properties of porous polyamide films were investigated. It was a novel method to prepare the porous films by blending the sal
APA, Harvard, Vancouver, ISO, and other styles
16

Li, Bo-Yi, and 李柏逸. "Fabricating high transmission transparent conductive thin films in Ag/TCO/Ag multilayer films." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/zwzdu8.

Full text
Abstract:
碩士<br>國立中山大學<br>材料與光電科學學系研究所<br>104<br>Nowadays, transparent conductive films (TCFs) are applied in many electronic devices to provide convenient life for us. The most popular transparent conductive film is indium tin oxide (ITO). However, since the abundance of indium in the earth is limited, the demand is greater than the supply; the price of indium has been rising. Therefore, the researches for alternative materials become more and more important; including looking for novel materials, as well as composite structures to reduce the consumption of ITO. This research is to study the performanc
APA, Harvard, Vancouver, ISO, and other styles
17

Tsai, Yun-Zhang, and 蔡昀璋. "Fabricating high transmission TCO/Ag/TCO multilayer films for transparent conductive films application." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/8ebfj3.

Full text
Abstract:
碩士<br>國立中山大學<br>材料與光電科學學系研究所<br>107<br>In nowadays, transparent conductive thin films (TCFs) are applied in many electronic devices of technologies such as flat panel display, electrode, and so on. It provides convenient life to us. The indium tin oxide is the most popular material in TCFs. However, with shortage of indium in Earth’s crust, high cost due to market demand, and toxic substance for environment. Thus, we should find alternative material to replace it. The research of transparent conductive films applying for electrode, we used ZnO/Cu/Ag/ZnO multilayer films structure (sandwich st
APA, Harvard, Vancouver, ISO, and other styles
18

Lin, Yung-Sheng, and 林永昇. "High Efficiency Transparent Organic Thin Film Transistors." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/53959590162272131414.

Full text
Abstract:
碩士<br>國立交通大學<br>光電工程系所<br>94<br>One novel electrode-architecture has been adapted to fabricate transparent organic thin-film transistors (OTFTs). Due to the high injection barrier of the indium-tin-oxide (ITO)/pentacene interface, the device exhibited a non-ideal behavior. After the modification of the contact by inserting a thin-layer of one metal oxide (MoO2 or V2O5), the device performance was improved dramatically. By using the novel electrode architecture, an OTFT with more than 60 % transmittance in the visible region has been demonstrated. In addition, the transmittance was further impr
APA, Harvard, Vancouver, ISO, and other styles
19

Laio, Jia-Lin, and 廖家翎. "High Quality Graphene for Transparent Conductive Film Applications." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/21553958115568775871.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Liu, Yung-Cheng, and 劉永丞. "Microstructure and characteristics of high transparent and hard (AlSiB)N composite films." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/15919032228034303290.

Full text
Abstract:
碩士<br>國立中興大學<br>材料科學與工程學系所<br>105<br>In recent years, the hard coating is required to have not only a high hardness, but also other multifunctional properties. The hard and transparent coating can be a protective layer to directly protect glass surface or metal thin film in many optical applications like reflecting mirror, heat mirror, and solar spectrally selective absorber coatings. The AlN, Si3N4, and BN are all the wide band gap materials and have high resistance to thermal and chemical environment. Among of them, AlN has good dielectric properties; Si3N4 has high fracture toughness; BN ha
APA, Harvard, Vancouver, ISO, and other styles
21

Lee, Chun-Jui, and 李均叡. "Fabrication of Low Toxic, Transparent, and High Hydrophobic CNT/EC Composite Films." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/75662686626305016511.

Full text
Abstract:
碩士<br>國立中正大學<br>化學工程研究所<br>99<br>In the study, ethyl cellulose (EC) solution was coated on the slide to form an uniform EC buffer layer by a facile and convenient spin coating method. The stable carbon nanotubes (CNTs) suspension was also used this method to attach on the surface of buffer layer. So we got the low toxic, transparent, and high hydrophobic CNT/EC composite films. In the experiment, we only use ethanol and water, and do not use highly toxic organic solvents, such as: chloroform, dichlorobenzene. By adjusting the preparation parameters, such as: different EC buffer layer placement
APA, Harvard, Vancouver, ISO, and other styles
22

Lin, Che-Min, and 林哲民. "Preparation and Optical Properties of High Transparent Polyimide /Inorganic Nanoparticles Hybrid Thin Films." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/69570665925969678362.

Full text
Abstract:
碩士<br>明志科技大學<br>材料工程研究所<br>99<br>In this study, the polyimide/TiO 2 hybrid thin films were successfully prepared by sol-gel process. The effects of TiO 2 content on the hybrid film properties and the optimum operating conditions were also investigated. TGA and DSC analysis showed that the decomposition temperature of polyimide was about 468℃.The T d increased as the titania content in hybrid thin films increased.FTIR spectra indicated that the amidization w a s c o m p l e t e a n d t h e c r o s s - l i n k i n g Ti - O - Ti n e t w o r k f o r m e d . n&k and UV-vis analysis showed that the
APA, Harvard, Vancouver, ISO, and other styles
23

Wu, Tsung-Heng, and 吳宗恆. "Preparation and Optical Properties of High Transparent Polyimide /Inorganic Nanoparticles Hybrid Thin Films." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/82198928090424065338.

Full text
Abstract:
碩士<br>明志科技大學<br>化學工程研究所<br>98<br>In this study,first, high refractive polyimide/titania hybrid thin films BTDA-ODA/TiO2(PT0-PT90) were prepared from the soluble polyimide and titania colloids. FTIR analysis confirmed the formation of polyimide and titania matrix. TGA and DSC analysis showed that the decomposition temperature were in the range of 455-532oC and addition of titania could enhance the thermal stability of hybrid films. n&k and UV-vis analysis showed that the refractive index of the prepared hybrid thin films increased from 1.681 to 1.961 when the titania content increased from 0 to
APA, Harvard, Vancouver, ISO, and other styles
24

LIN, MING-HUI, and 林明輝. "Semi-transparent conductive NiO composite films deposited by high power impulse magnetron sputtering." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/5s4ckh.

Full text
Abstract:
碩士<br>明志科技大學<br>材料工程系碩士班<br>106<br>In the first part of the study, the NiO-Ag composite films were prepared together by HIPIMS (high power impulse magnetron sputtering) and RF (radio frequency) power. Doping monovalent Ag cations with different process conditions and discussing the influence of the microstructure and the photoelectric properties of NiO-Ag composite films. The experimental results shows that, when the content of Ag is increased to 2.15 at.% at room temperature, then the carrier concentration of NiO-Ag composite film increases to 1.67 × 1021 cm-3, resulting in the decrease of th
APA, Harvard, Vancouver, ISO, and other styles
25

Lai, Yi-Ting, and 賴怡廷. "High performance flexible transparent conductive films based on reduced graphene oxides and silver nanowires." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/19964776613070757817.

Full text
Abstract:
碩士<br>國立清華大學<br>材料科學工程學系<br>102<br>This work demonstrates an one-step process to synthesize uniformly dispersed hybrid nanomaterial containing silver nanowires (AgNWs) and p-type reduced graphene (p-rGO). The hybrid nanomaterial was coated onto a polyethylene terephthalate (PET) substrate to prepare high performance flexible transparent conductive films (TCFs). The p-rGO plays the role of bridging discrete AgNWs, providing more electron holes, and lowering the resistance of the contacted AgNWs, which enhances the electrical conductivity without sacrificing too much transparence of the TCFs. In
APA, Harvard, Vancouver, ISO, and other styles
26

Wu, Chin-Kun, and 吳晉坤. "The Study of High Power GaN-Based LEDs with Transparent Indium-Zinc-Oxide Films." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/18460977306113150006.

Full text
Abstract:
碩士<br>國立成功大學<br>微電子工程研究所碩博士班<br>92<br>In this thesis, the fabrication and characteristics of large-area (0.6�~ 0.6 mm2 ~ 1.5�~1.5 mm2) high power GaN-based LEDs with an IZO overlay are presented. The effectiveness of IZO TCL for high power LEDs with different sizes and electrode designs was investigated. Indium-Zinc-Oxide (IZO) films were prepared by RF magnetron sputtering system. By suitably adjusting the deposition condition, the IZO film with thickness of 300 nm has an optimum resistivity of 3.4�~10-4 Ω-cm and an average transparency above 90% in blue light range (465 – 475 nm). Our exper
APA, Harvard, Vancouver, ISO, and other styles
27

Chang, Yao-Yuen, and 張耀元. "High Refractive Index and Transparent Thick Film of TiO2/Epoxy Nanocomposite." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/56313558810218593987.

Full text
Abstract:
碩士<br>國立中央大學<br>化學工程與材料工程研究所<br>97<br>The purpose of this research is the preparation of transparent thick film or monolith with high refractive index. Titanium oxide, with a reported refractive index of 2.5 for anatase, can be a suitable inorganic additive in improving the refractive index of organic-inorganic hybrid materials. Epoxy resin, which is in common use of LED’s encapsulation. If titanium oxide and epoxy could be composited into a transparent material, the resulting product would have wide applications. To achieve such hybrid material with high refractive index and good transparency
APA, Harvard, Vancouver, ISO, and other styles
28

Syu, Jheng-Yuan, and 徐政遠. "The investigation of doped graphene for high performance transparent conductive film." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/49587815228225381956.

Full text
Abstract:
碩士<br>國立中央大學<br>能源工程研究所<br>104<br>Since the discovery of graphene, its outstanding performance such as the excellent optical transparency, electrical conductivity and the mechanical flexibility, making graphene as the mostly promising candidate materials for the next-generation transparent conductive electrodes. In this study, the high quality monolayer graphene is synthesized on copper foils by chemical vapor deposition (CVD) process, a promising method for large-scale production. To improve and control its electrical conductivity and work function, the chemical doping of AuCl3as dopants and
APA, Harvard, Vancouver, ISO, and other styles
29

Li, Chi-Yuan, and 李啟源. "Fabrication of High Sensitive Sensors Based on Transparent Conductive Thin Films and Lossy Mode Resonance." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/gtwjs3.

Full text
Abstract:
碩士<br>逢甲大學<br>電機工程學系<br>102<br>In this study, we fabricate a high sensitivity D-LMR type liquid refractive index fiber sensor combined with D-shaped optical fiber and thin-film coating techniques. By polishing a single mode fiber with the real-time monitoring system to control the residual thickness of side polished fiber. Transparent conductive oxides (TCOs) were coated on D-shaped fiber by using a radio-frequency sputtering system. At the visible and near infrared spectra, the real part of the permittivity of TCOs thin film is positive and higher in magnitude than both its own imaginary part
APA, Harvard, Vancouver, ISO, and other styles
30

Hu, Sheng-Hsiang, and 胡勝翔. "Synthesis and structure-property relationship of transparent, high Tg polyimide films for flexible substrate applications." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/83090143426651404984.

Full text
Abstract:
碩士<br>國立交通大學<br>材料科學與工程學系<br>100<br>In recent year, the organic flexible devices are being intensely pursued because today’s technology trend necessitates lightweight, flexibility, thermal stability, and dielectric properties. In terms of low cost, polymer substrates are preferred over metal foil due to their ease in fabrication based on roll-to-roll process. However, there are several drawbacks and limitations of using a polymer substrate, for example, high water vapor permeation rate (WVTR) on PET or PEN, and low adhesion between polymer and inorganic layer. In addition, low glass transition
APA, Harvard, Vancouver, ISO, and other styles
31

SU, YU-YI, and 蘇育依. "Preparation of Hydrophilic and High Transparent Anti fogging Film on Polycarbonate Substrates." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/88584989817821484120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Wu, Chia-Hsien, and 伍家顯. "Study on High Conductive and Transparent Copper on Zinc Oxide Thin Film." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/zvtt7p.

Full text
Abstract:
碩士<br>國立虎尾科技大學<br>光電與材料科技研究所<br>103<br>In thesis of this page, using a dual plasma enhanced metal organic chemical vapor deposition (DPEMOCVD) Whom apparatus grow up under low temperature Zinc Oxide (ZnO) thin film, its average printing opacity rate is 87%, the resistivity is 6.94Ωcm. And then disperse with the body of ultrasonic powder, spread Copper and endure the rice particle in ZnO thin film. Analyze different the intersection of weight and the intersection of percentage and the intersection of Copper and powder, Polyvinylpyrrolidone (PVP) Thickness, different annealed temperature, differ
APA, Harvard, Vancouver, ISO, and other styles
33

Hsieh, Yi-Feng, and 謝宜峰. "Preparation of Highly Flat Transparent Conductive Thin Film by RF Magnetron Sputtering Using Al-doped ZnO Nanotargets." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/04027175750787118594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Hsu, Jia-Syuan, and 許家瑄. "Low resistance of high transparent indium tin oxide films with an embedded metal layer by sputtering." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/73331351016356428398.

Full text
Abstract:
碩士<br>明新科技大學<br>化學工程與材料科技研究所<br>102<br>Transparent conductive oxide (TCO) layers exhibit high transmittance in the visible region within the wavelength from 400 to 700 nm, and low resistance. Indium tin oxide (ITO) gets a lot of attentions for its superior electric and optical properties. however, a single layer of thin ITO layer prepared at room temperature can not achieve a satisfactory conductivity. By inserting a thin ultra-thin metal layer with a low resistivity into the dielectric layer, metal/dielectric layers (M/D), D/M, or D/M/D layers were prepared. In this study, we used ITO/metal/I
APA, Harvard, Vancouver, ISO, and other styles
35

DENG, JUN-MAO, and 鄧鈞懋. "Research of Transparent Conductive Films on the Flexible Plastic Substrates Using High Power Impulse Magnetron Sputtering." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/b7t2sm.

Full text
Abstract:
碩士<br>國立中央大學<br>光電科學與工程學系<br>107<br>The flexible substrate material is a new generation substrate technology with the advantages of continuous roll-to-roll production. The material needs to be light, thin, not easily broken, and easy to carry and bend. The molecular structure is related to the charge conduction rate and is affected by the morphology of the film when it is sputtered by a molecule. HIPIMS (high power impulse magnetron sputtering) is a high-power pulsed power supply for magnetron sputtering, which provides a low-porosity film at low temperatures. In a flexible substrate, the thin
APA, Harvard, Vancouver, ISO, and other styles
36

Hsieh, Ching-Wen, and 謝清文. "High Transparency and Low Thermal Expansion Coefficient of Polyimide/SiO2 Nano Hybrid Films." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/42726163988704781044.

Full text
Abstract:
碩士<br>國立勤益科技大學<br>化工與材料工程系<br>99<br>The optimal synthesis of colorless polyimide, 3,4′-Oxydianiline (ODA) and Bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BCDA), with co-solvent of γ-Hydroxybutyric acid lactone (GBL) and N,N-dimethyl-acetamide (DMAc) by the weight ratio of 40/60, has been studied. The process temperature of colorless polyimide film can be dropped to 170℃ compared with that so synthesized by one-step process. The colorless polyimide/SiO2 nano hybrid films with high transparency and low coefficient of thermal expansion (CTE) were developed from silica-sol and col
APA, Harvard, Vancouver, ISO, and other styles
37

Lin, Kuan, and 林寬. "Highly Transparent Photodetector based on Zinc Oxide Thin-Film Transistors with Gold Nanoparticles Structure via Low Temperature Fabrication." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/3294q3.

Full text
Abstract:
碩士<br>國立交通大學<br>材料科學與工程學系奈米科技碩博士班<br>108<br>In this thesis, a highly transparent thin film transistor (TFT) is fabricated on a conductive oxide glass substrate under low temperature. Zinc oxide (ZnO) and gold nanoparticles (AuNPs) are used as the main materials, and the fabricated photosensor is capable of sensing ultra violet (UV) and visible light. ZnO is used as the conductive channel material, which possesses high carrier mobility, high transparency, and is non-toxic. ZnO is often used in UV photosensors because the band gap is 3.3 eV and has the ability to absorb UV light. The ZnO thin fi
APA, Harvard, Vancouver, ISO, and other styles
38

Peng, Ssu-hsiang, and 彭思翔. "Research of high refractive index transparent conducting Nb-doped TiO2 (TNO) films and its application on high reflection mirror." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/31656331611613588338.

Full text
Abstract:
碩士<br>國立中央大學<br>光電科學研究所<br>98<br>Transparent conducting oxide (TCO) is a special material. It has the characteristic that like metals it can conduct electricity. Furthermore metal oxides are transparent in the visible light region. Presently, TCO is a key component in solar cells, organic light emitting displays (OLEDs), light emitting displays (LEDs), flat panel displays (FPDs), touch panels, etc. Sn-doped In2O3 (ITO) is a major component of the most widely used TCO, because it has excellent resistivity and transmittance in the visible light region. However, indium is in short supply worldwid
APA, Harvard, Vancouver, ISO, and other styles
39

He, Chao Hsiang, and 何兆祥. "Preparation of RF-Sputtered Transparent Conductive Thin Films of Antimony-doped Tin Oxide with High Temperature Stability." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/61850202671499319739.

Full text
Abstract:
碩士<br>長庚大學<br>化工與材料工程學系<br>98<br>The objectives of this research are to prepare well crystalline antimony-doped tin oxide (ATO) powders by either solid state reaction method or co-precipitation method, to prepare ATO sputtering targets using these synthesized ATO powders through the ceramic processing procedure of ball milling, granulation, dry pressing, cold iso-static pressing, de-waxing, and sintering or hot pressing, and to deposit transparent conductive ATO thin films with high temperature stability and excellent optoelectric properties. It is hoped that the developed ATO thin films can b
APA, Harvard, Vancouver, ISO, and other styles
40

Liu, Jin-Rang, and 劉金讓. "Research of the mechanism for transparent conductive oxide films with high sheet resistance applied in touch panel." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/81868961558542034672.

Full text
Abstract:
碩士<br>國立中央大學<br>光電科學研究所<br>99<br>ITO films have been deposited by DC pulse magnetron sputtering on glass (B270) at room temperature. The Ssheet resistance and resistivity were measured by Hall system and shownwere decreased when film thickness increased. Resistivity The resistivities of the as-deposited films with thickness 6 nm and 28 nm were 1.43*10-3 Ω-cm and 4.72*10-4 Ω-cm, respectivelyas deposited. As deposition, Tthe ultrathin ITO films are were amorphous. as deposited wAnd ithile the films became polycrystalline with of very small grains size when the film thickness was increased to a
APA, Harvard, Vancouver, ISO, and other styles
41

Yu, Chin-chun, and 於敬鈞. "Research for fabricating high transmission transparent conductive thin film in Ag/ITO/Ag structure." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/2rnqyb.

Full text
Abstract:
碩士<br>國立中山大學<br>材料與光電科學學系研究所<br>104<br>Nowadays, transparent conductive films (TCFs) are more and more important in the world. They are widely used in numbers of electronic devices, including liquid crystal displays, organic light-emitting diodes, touchscreen, and photovoltaics et al. One of the promising structures of TCFs is made of triple-layer which has a thin metal film (e.g., Ag, Cu) between two metallic oxide thin films (e.g., ITO, ZnO, TiO2). These structure gives high conductivity and also transparency. It motivates us to study the TCF with metal/metallic oxide/metal structure with su
APA, Harvard, Vancouver, ISO, and other styles
42

Hsieh, Chang-Yen, and 謝昌諺. "High Transparent Conductive Film,of low Resistance AZO and Ag Multilayer Preparation by Sputtering." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/4kc3ca.

Full text
Abstract:
碩士<br>明新科技大學<br>化學工程與材料科技系碩士班<br>105<br>In this thesis, several stacking layers of aluminum dope zinc oxide(AZO), Ag/AZO, AZO/Ag, AZO/Ag/AZO and AZO/Ag/WO3 were sputtered using sputtering system. With different layers for transparent conductive oxide (TCO) layers exhibit high transmittance in the visible region within the wavelength from 400 to 700 nm with low reistance. The AZO was characterized as a good transparent dielectric material, a low-resistance metal film was inserted into the AZO layer, The AZO/Ag/AZO structure can achieve a sufficient conductivity with an acceptable transparency.
APA, Harvard, Vancouver, ISO, and other styles
43

Tsai, Shang Yu, and 蔡尚育. "Fabrication ZnO transparent thin film transistor using high dielectric constant Gd2O3 as gate insulator." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/16333640452274744504.

Full text
Abstract:
碩士<br>長庚大學<br>光電工程研究所<br>97<br>Abstract Developments of the transparent electronic circuits have been interested in most of researches to create new optoelectronic devices and applications. Among them the transparent field-effect transistor (FET) is a key device for realizing transparent circuits. Recently, transparent oxide semiconductors have emerged as promising materials for next generation thin film transistors (TFTs). ZnO, especially, has attracted much more attention with its advantages than other semiconductor materials because of its wide direct band gap of 3.4 eV, high transparency i
APA, Harvard, Vancouver, ISO, and other styles
44

Kuan-YuChen and 陳冠宇. "High performance of ZnO transparent thin film transistors fabrication and performances study by ALD." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/91480852108415400569.

Full text
Abstract:
碩士<br>國立成功大學<br>光電科學與工程研究所<br>98<br>This research is to investigate the highly transparent ZnO thin film used by Atomic Layer Deposition (ALD). Because of large area uniformity and high step coverage in fabricating enhancement-mode thin film transistors with the ZnO films. This research changed the different temperature to deposited ZnO films as the active channel layers and changed the different amount of Al slightly doped into ZnO films by ALD, To analyze the IDS-VDS and IDS-VGS curves, it would illuminate with different wavelengths for optical stability. For aspect of varying-temperature
APA, Harvard, Vancouver, ISO, and other styles
45

Chang, Yuan-Ting, and 張媛婷. "The investigation of transferring graphene film for high performance transparent conductive film by roll-to-roll dry transfer method." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/3555ur.

Full text
Abstract:
碩士<br>國立中央大學<br>能源工程研究所<br>106<br>Graphene, which has exceptional electrical, mechanical, transparency and chemical stability properties, has potential to be applied to flexible electronic and optoelectronic device. Using Chemical Vapor Deposition (CVD) to synthesize graphene film on transition metals is the main method for producing large area, highly crystalline, and uniform graphene film. However, transferring large area graphene films is still a critical issue for graphene applying in industrial-scale production. In this research, we use CVD to synthesize large area and high-performanc
APA, Harvard, Vancouver, ISO, and other styles
46

Kuo, Hong-Wei, and 郭宏瑋. "High Performance Transparent Thin Film Transistors Based on Indium Oxide/Gallium Oxide Super-Lattice Structure." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/54255817254886869693.

Full text
Abstract:
碩士<br>國立臺灣大學<br>光電工程學研究所<br>97<br>We report a fabrication method to realize transparent thin film transistors (TFTs) at room temperature using radio frequency (RF) sputtered In2O3/Ga2O3 materials. The transmission line method (TLM) was used to examine the relationship between the resistivity of oxide channels and the growth conditions. We note that the oxide TFTs with channel resistivity lying between 4.4×10^4 Ω-cm to 6.56×10^5 Ω-cm exhibit better transistor characteristics. The gate insulator was formed by a thin silicon nitride layer grown by plasma enhanced chemical vapor deposition (PECVD)
APA, Harvard, Vancouver, ISO, and other styles
47

Lai, Hsiao-Ping, and 賴曉萍. "Study of High Transmittance Polymer Semiconductor as Active Layer for Transparent Organic Thin Film Transistors." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/7j7h28.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>化學工程系<br>105<br>In this study, we investigate the transparent semiconductor materials which can be applied on Organic thin film transistors (OTFT). We demonstrate that Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA), a polymer with an absorption spectrum in Ultraviolet (UV) region, and poly{2,6-4,8-di(5-ethylhexylthienyl) benzo [1,2-b;3,4-b] dithiophene-alt-5-dibutyloctyl-3,6-bis(5-bromothiophen-2-yl)pyrrolo[3,4 c]pyrrole-1,4-dione (PBDTT-DPP), a low bandgap material which has a absorption spectrum in near infrared (NIR) region. We utilized the different self-assembled
APA, Harvard, Vancouver, ISO, and other styles
48

CHEN, CHI-LIANG, and 陳麒喨. "Fabrication of ZnO Thin Films with High Transparency and Flat Surface by Sol-Gel Method." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/c4yksf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Lin, Zheng-Xian, and 林政賢. "High Efficiency Carrier Injection on Pentacene-based Transparent Organic Thin-Film Transistors with Fullerene (C60) Layers." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/48009282919922221789.

Full text
Abstract:
碩士<br>國立成功大學<br>光電科學與工程研究所<br>96<br>This thesis discusses the interface effects of contact resistance between semiconductor layers and source/drain electrodes of pentacene-based organic thin-film transistors (OTFTs). While using indium tin oxide (ITO) as the source/drain electrode, the device performance became limited because of the interface barrier between the indium tin the oxide electrode and the pentacene layer, which caused limitations in the carrier injection. To improve the device performance, Fullerene (C60) was used as a modification layer inserted between the source/drain electrode
APA, Harvard, Vancouver, ISO, and other styles
50

Cheng, Chun-Wen, and 鄭竣文. "Fabrication IZO and IGZO transparent thin film transistor using high dielectric constant Sm2O3 as gate insulator." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/51468370274126459621.

Full text
Abstract:
碩士<br>國立清華大學<br>電子工程研究所<br>100<br>In recent years, a lot of wide bandgap semiconducting rare metal oxide (REO) materials have been widely used in numerous electrical elements. But, samarium oxide (Sm2O3), one of rare metal oxides still has not been investigated widely. In this thesis, we were focused on structural and electrical properties of samarium oxide. Next, we have introduced samarium oxide as gate dielectric insulator of transparent thin film transistors, and then prepared active layer with IZO or IGZO respectively, finally analyzed their characteristics by measurement. The first part
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!