Relevant bibliographies by topics / Hollow bulb

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Hollow bulb'

Author: Grafiati
Published: 2 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Hollow bulb.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Hollow bulb"

1

Shrestha, Bidhan, E. Richard Hughes, Raj Kumar Singh, et al. "Fabrication of Closed Hollow Bulb Obturator Using Thermoplastic Resin Material." Case Reports in Dentistry 2015 (2015): 1–5. http://dx.doi.org/10.1155/2015/504561.

Full text
Abstract:
Purpose.Closed hollow bulb obturators are used for the rehabilitation of postmaxillectomy patients. However, the time consuming process, complexity of fabrication, water leakage, and discoloration are notable disadvantages of this technique. This paper describes a clinical report of fabricating closed hollow bulb obturator using a single flask and one time processing method for an acquired maxillary defect. Hard thermoplastic resin sheet has been used for the fabrication of hollow bulb part of the obturator.Method.After fabrication of master cast conventionally, bulb and lid part of the defect
APA, Harvard, Vancouver, ISO, and other styles
2

Azhindra, A., Haryo Mustiko Dipoyono, and Titik Ismiyati. "Protesa Maksilofasial Thermoplastic Nylon (Valplast) dengan Hollow Bulb (Klas III Aramany palate schisis hereditary)." Majalah Kedokteran Gigi Indonesia 19, no. 1 (2012): 29. http://dx.doi.org/10.22146/majkedgiind.15648.

Full text
Abstract:
Latar Belakang: pada penderita palato schisis (celah langit-langit)yang disebkan hereditary atau bawaan lahir terlihat defect yang menyebabkan gangguan bicara (sengau), penelanan, pengunyahan, estetik, dan psikologis. Untuk dapat mencapai fungsi bicara, fungsi mengunyah dan fungsi estetika diperlukan protesa untuk menutup celah tersebut. Tujuan: untuk meninformasikan cara rehabilitas defect atau cacat pada wajah dengan protesa maksilofasial thermoplastic nylon dengan hollow buib yang berguna untuk mengembalikan fungsi bicara, penelanan, pengunyahan, estetik dan psikologis penderita. Kasus dan
APA, Harvard, Vancouver, ISO, and other styles
3

Santoso, Daniel Budi, M. Th Esti Tjahjanti, and Heriyanti Amalia Kusuma. "Protesa Maksilofasial Dengan Hollow Bulb pada Kasus Klas I Aramany untuk Rehabilitasi Pasca Hemimaxillectomy." Majalah Kedokteran Gigi Indonesia 18, no. 1 (2011): 53. http://dx.doi.org/10.22146/majkedgiind.16478.

Full text
Abstract:
Latar belakang. tindakan hemimaxillectomy akan menimbulkan terjadinya defect yang menyebabkan gangguan bicara (sengau), penelanan, pengunyahan, estetik dan kejiwaan. Tujuan. untuk menginformasikan cara rehabilitasi defect atau cacat pada wajah dengan protesa maksilofasial hollow bulb untuk mengembalikan fungsi bicara, penelanan, pengunyahan, estetik dan kejiwaan penderita. Kasus dan penanganan. pasien pria berusia 43 tahun datang ke RSGM Prof. Soedomo atas rujukan dari dokter THT RS. Dr. Sardjito. Saat datang pasien merasa terganggu dengan adanya pembengkakan di dalam mulut, kemudian dilakukan
APA, Harvard, Vancouver, ISO, and other styles
4

Vyas, Archana, Dhanasekar B, I. N. Aparna, and Prabhu Nayana. "Prosthetic rehabilitation of a patient with near total maxillectomy using a hollow bulb obturator: a case report." Journal of Research in Dentistry 5, no. 1 (2017): 6. http://dx.doi.org/10.19177/jrd.v5e120166-10.

Full text
Abstract:
Aim: To prosthetically rehabilitate maxillary defect in a patient with near total maxillectomy using hollow bulb obturator.Case description: Authors report a case of 64-year-old male patient with near total maxillectomy with respect to the left side who was referred for the prosthetic rehabilitation.Conclusions: The hollow bulb definitive obturator prosthesis rehabilitated the patient in terms of masticatory function, phonetics and esthetics. The hollow bulb design ensured patient comfort due to its decreased weight.
APA, Harvard, Vancouver, ISO, and other styles
5

Shrestha, GK, P. Parajuli, P. Suwal, and RK Singh. "Prosthetic rehabilitation of patient with maxillofacial defect by hollow bulb obturator." Health Renaissance 11, no. 3 (2014): 284–86. http://dx.doi.org/10.3126/hren.v11i3.9656.

Full text
Abstract:
Introduction: Post-surgical maxillary defect is mostly repaired by the use of an obturator, which is often quite heavy due to the extension into the defect that is better relieved by making it hollow. Objective: To fabricate hollow bulb obturator in simple way. Case: An 85 year old man was referred from ENT department after hemimaxillectomy to remove squamous cell carcinoma, for obturator prosthesis and was treated with hollow bulb obturator prosthesis. Conclusion: The hollow bulb reduces the weight of prosthesis making is comfortable for the patient. DOI: http://dx.doi.org/10.3126/hren.v11i3.
APA, Harvard, Vancouver, ISO, and other styles
6

Loibi, Elangbam, and Subramaniam Elangovan. "Two-piece hollow bulb obturator." Indian Journal of Dental Research 22, no. 3 (2011): 486. http://dx.doi.org/10.4103/0970-9290.87077.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ahila, SC, MVasantha Kumar, B. Muthukumar, and SSuganya Devi. "Hollow denture with hollow bulb obturator - A new approach." SRM Journal of Research in Dental Sciences 1, no. 1 (2010): 106. http://dx.doi.org/10.4103/0976-433x.121167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dr., Shrishti Bhardwaj, Lalit Kumar Dr., and Komal Sehgal Dr. "Rehabilitation of Post Covid Mucormycosis Maxillectomy Defect With Hollow Obturator." Heal Talk - A Journal of Clinical Dentitsry 16, no. 1 (2023): 49–51. https://doi.org/10.5281/zenodo.10071096.

Full text
Abstract:
 A 40-year old male patient reported to the OPD with a chief complaint of difficulty in eating, drinking and speaking. He had undergone maxillectomy due to post covid mucormycosis 1 year back.  Treatment plan: Definitive hollow bulb obturator. It was made hollow to reduce the weight of the obturator. Primary and final impressions were taken and cast was formed. The hollow bulb was made with lost salt technique to reduce the weight. 
APA, Harvard, Vancouver, ISO, and other styles
9

El Assraoui, Khadija, Kanza Mrhar, Rajae Zeroual, Khadija Kaoun, and Samira Bellemkhannate. "Closed Hollow Bulb Obturator: Laboratory Procedures." European Journal of Dental and Oral Health 2, no. 2 (2021): 23–26. http://dx.doi.org/10.24018/ejdent.2021.2.2.46.

Full text
Abstract:
Patients with maxillectomy face problems with speech, swallowing, chewing and appearance. These defects are prosthetically rehabilitated with obturators that prevent oronasal communication, restoring function and social reintegration.
 An obturator must be light-weight, tight, easy to make and low cost. This article describes a simplified technique for fabrication of an acrylic hollow bulb obturator in two pieces using single flask. The prosthesis is made entirely of heat cure acrylic resin. The two parts of the obturator are sealed with the self-curing resin.
APA, Harvard, Vancouver, ISO, and other styles
10

Palmer, Bob, and Kyle W. Coffey. "Fabrication of the hollow bulb obturator." Journal of Prosthetic Dentistry 53, no. 4 (1985): 595–96. http://dx.doi.org/10.1016/0022-3913(85)90658-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Hollow bulb"

1

Figueiredo, Cecília Maria Fontes. "Os esmoleiros do rei : a bula da Santa Cruzada e seus oficiais na capitania de Minas Gerais (1748-1828)." reponame:Repositório Institucional da UFF, 2014. https://appdesenv.uff.br/riuff/handle/1/444.

Full text
Abstract:
Submitted by Maria Dulce (mdulce@ndc.uff.br) on 2014-10-24T19:52:28Z No. of bitstreams: 1 Figueiredo, Cecilia-Tese-Historia-2014.pdf: 1818707 bytes, checksum: f0b9c9b68bc06b34087323f7fbbba950 (MD5)<br>Made available in DSpace on 2014-10-24T19:52:28Z (GMT). No. of bitstreams: 1 Figueiredo, Cecilia-Tese-Historia-2014.pdf: 1818707 bytes, checksum: f0b9c9b68bc06b34087323f7fbbba950 (MD5)<br>O trabalho tem por objeto o estudo da ação dos esmoleiros da Bula da Santa Cruzada, no período de 1748 a 1828, na região das Minas. Buscou-se entender o significado da arrecadação da esmola para Portugal cujo ob
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Hollow bulb"

1

Nowakowska, Natalia. Hollow Law? Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198813453.003.0005.

Full text
Abstract:
In the ‘core’ lands of the Polish Crown (korona), the chief instrument of King Sigismund’s Reformation policy was the anti-Lutheran edict. He issued eleven such edicts (1520–40), at a more prolific rate than any other prince in Christendom, the first predating even Pope Leo X’s famous Exsurge Domine bull against Luther. This chapter seeks to account for a central paradox: the edicts were draconian in content, but went entirely unenforced by the Crown, which repeatedly ignored local requests to implement them. The symbolic functions of anti-Reformation edicts, both internationally and domestica
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Hollow bulb"

1

Kunsputri, Fahma Aldihyah, Fransiscus Wihan Pradana, Endang Wahyuningtyas, and Sri Budi Barunawati. "Rehabilitation of Mucoepidermoid Carcinoma Palatum with Hollow Bulb Obturator: A Case Report." In Proceedings of the International Conference on Sustainable Innovation on Health Sciences and Nursing (ICOSI-HSN 2022). Atlantis Press International BV, 2022. http://dx.doi.org/10.2991/978-94-6463-070-1_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cagatay, Serra, Burhanettin Koc, and Kenji Uchino. "Piezoelectric Ultrasonic Motors Using Bulk PZT and Utilizing Two Orthogonal Bending Modes of a Hollow Cylinder (Part 2)." In Ceramic Transactions Series. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118408186.ch38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kumar Sarkar, Anup. "Pollination Biology and Environmental Water Pollution Indicator of Onion (Allium cepa L.)." In Plant Breeding - New Perspectives [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.111475.

Full text
Abstract:
Numerous genes in flowering plants, including onion (Allium cepa L.) govern morphological character differences in structure, shape, orientation, weight and number, etc. arising from their assortment and recombination due to pollination. Pollination in onion flower occurs mainly by insects (91%) and wind (9%), with gravity also contributing to the pollination process. The hybrid vigour seeds through cross pollination as an essential input in enhancing crop productivity. The present study reveals that an onion plant generally takes around 63 days to attain flowering position, and complete flowe
APA, Harvard, Vancouver, ISO, and other styles
4

"Chapter 10: Bulk Up, Not Hollow Out." In Canada. University of Toronto Press, 2012. http://dx.doi.org/10.3138/9781442661288-012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lannon, Alice. "The Big Black Bull of Hollow Tree." In Clever Maids, Fearless Jacks, and a Cat: Fairy Tales from a Living Oral Tradition. Utah State University Press, 2019. http://dx.doi.org/10.7330/9781607329206.c004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"RNA sequencing." In Nucleic Acids Sequencing, edited by C. J. Howe and Es Ward. Oxford University PressOxford, 1990. http://dx.doi.org/10.1093/oso/9780199630561.003.0006.

Full text
Abstract:
Abstract The first complete nucleotide sequence of a gene was published in 1964 by Robert Holley and associates. (1). This sequence was inferred from the transcript of the gene encoding yeast alanine tRNA. Determination of the 77 nucleotide sequence required 1 g of alanine tRNA, recovered from. 200 g of bulk tRNA, isolated from 140 kg of baker’s yeast and nine years of effort. Holley was awarded the Nobel prize in 1968. This effort compares with the thousand or so nucleotides of sequence now determined from a single high resolution sequencing gel. Recombinant DNA and associated sequencing tech
APA, Harvard, Vancouver, ISO, and other styles
7

Wight, Martin, and DAVID S. YOST. "Review of Charles Petrie, Diplomatic History 1713–1933 (London: Hollis & Carter, 1946)." In History and International Relations. Oxford University PressOxford, 2023. http://dx.doi.org/10.1093/oso/9780192867476.003.0020.

Full text
Abstract:
Abstract Petrie composed, Wight observed, “an international history that falls into two contrasted sections. The first is interesting and useful, the second is the reverse.… The survey of the eighteenth and nineteenth centuries, which makes the bulk of the book, is skilful and lucid.… It is in the final chapters that the book goes to pieces.… The politics of the Central Powers, the Polish Question, Ludendorff’s diplomacy which was to Hitler’s what Louis XIV’s was to Napoleon’s, the defeat of Russia, are ignored altogether.… It contains no mention of the League of Nations as a new departure in
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Hollow bulb"

1

Ahmad, S., O. A. Ashiru, and M. N. Al-Sonidah. "High Temperature Oxidation and Sulfidation Damages of a Waste Heat Boiler Bypass Damper Connected to a Sulfur Furnace." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03465.

Full text
Abstract:
Abstract A damper from an internal bypass line in a waste heat boiler was removed during shutdown in a fertilizer plant because of severe metal loss. The damper was connected to a sulfur furnace – it failed due to detachment of the flapper from its hollow shaft. In the plant, sulfur is burnt in the furnace (1051οC) to produce sulfur dioxide. The damper assembly consists of flapper and a hollow shaft which are fixed together using 3 pins. Chemical analysis showed that the flapper and hollow shaft material were constructed from SS 310 and SS 309 respectively, while the pins were made of plain ca
APA, Harvard, Vancouver, ISO, and other styles
2

Ciullo, Giuseppe, Luca Barion, Marco Contalbrigo, et al. "A facility for testing bulk superconducting hollow MgB$_2$ cylinders for the production and shielding of magnetic fields for polarized targets and nuclear fusion fuels." In 20th International Workshop on Polarized Source, Targets, and Polarimetry. Sissa Medialab, 2025. https://doi.org/10.22323/1.472.0047.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Truong, Tran-Chau, John E. Beetar, and Michael Chini. "Sub-two-cycle Pulse Synthesizer Based on Multidimensional Solitary States in N2O-filled Hollow-core Fiber." In CLEO: Science and Innovations. Optica Publishing Group, 2023. http://dx.doi.org/10.1364/cleo_si.2023.sth1p.2.

Full text
Abstract:
Octave-spanning spectra centered at 1.4 µm are generated by Raman-enhanced spectral broadening of a Yb:KGW amplifier in N2O-filled hollow-core fiber and compressed to 1.5 cycles in a two-channel synthesizer using only bulk materials for compression.
APA, Harvard, Vancouver, ISO, and other styles
4

Slimani, Sawssen, M. Vasilakaki, Kalliopi N. Trohidou, Nader Yaacoub, and Davide Peddis. "EXPLORING SURFACE EFFECTS IN HOLLOW IRON OXIDE NANOPARTICLES." In 17th International Conference on Fundamental and Applied Aspects of Physical Chemistry. Society of Physical Chemists of Serbia, 2024. https://doi.org/10.46793/phys.chem24i.289s.

Full text
Abstract:
The large surface-to-volume ratio (R=S/V) in the nanoparticles is proving to be a key factor for the novel physical, chemical, and magnetic properties compared to those of the corresponding bulk material. The possibility to synthesize spherical hollow magnetic nanoparticles allows R to be further enhanced with a consequent increase of the disorder and magnetic frustration, thus opening new perspectives to explore the surface magnetism at the nanoscale. In this context, here we present a comparative study of the morpho-structural and magnetic properties of full and hollow maghemite (γ-Fe2O3) na
APA, Harvard, Vancouver, ISO, and other styles
5

Marur, Prabhakar. "Analytical and Numerical Study of Crushing of Syntactic Foams Under Uniaxial Compression." In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59264.

Full text
Abstract:
Syntactic foams are a class of particulate composites made with hollow microspheres dispersed uniformly in a matrix. By the inclusion of hollow spheres in the matrix, the bulk mechanical properties are improved by limiting the bending of cell edges and localization of inelastic deformation, which is the cause of failure in the case of low-density foams. For the general class of cellular materials, several analytical and experimental methods are available in the literature to characterize the material. In the case of syntactic foams, relatively few methods exist for the computation of effective
APA, Harvard, Vancouver, ISO, and other styles
6

Kawawaki, Masataka, Yuichi Nakano, and Toshiyuki Sawa. "Elastoplastic FEM Stress Analysis and Strength Evaluation of Adhesive Tapered Lap Joints of Hollow Shafts Subjected to Tensile Loads." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-1119.

Full text
Abstract:
Abstract Tensile strength of adhesively bonded tapered lap joints of hollow shafts is investigated in this study. In tapered lap joint, the bonded area is increased even in hollow shafts which are relatively thin. Furthermore, assembling and adjusting the axes of the shafts are easier because of the self-aligning effect. In the experiments, the elastoplastic stress-strain behavior of the adhesive was measured by the uni-axial tensile test of the bulk specimen. The tensile strength of the joints with various taper angles was tested subsequently. In the analysis, the stress distributions at the
APA, Harvard, Vancouver, ISO, and other styles
7

Sojo-Gordillo, Jose Manuel, Yashpreet Kaur, Mercè Pacios-Pujadó, et al. "Thermoelectric Properties of Stressed P-Doped Polycrystalline Silicon Hollow Nanotubes." In ASME 2024 7th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/mnhmt2024-132609.

Full text
Abstract:
Abstract Thermoelectric generators have the potential to efficiently convert waste heat into valuable electrical power. Nanoengineering techniques have emerged as a promising solution to enhance the thermoelectric properties of abundant and inexpensive materials like silicon, in contrast with the scarce, toxic, and expensive conventional bulk materials. Recently, a novel class of nanostructured materials in the form of extensive, paper-like fabrics composed of nanotubes has been developed, offering a cost-effective and scalable approach to thermoelectric power generation. In this study, the fu
APA, Harvard, Vancouver, ISO, and other styles
8

Chung, SungWon, Makoto Nakai, Edward Preisler, and Hossein Hashemi. "Poly-Crystalline Silicon Waveguide Devices on Hollow Deep Trench Isolation in Standard Foundry Bulk Silicon Process." In Optical Fiber Communication Conference. OSA, 2018. http://dx.doi.org/10.1364/ofc.2018.th2a.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Merchan-Merchan, W., A. V. Saveliev, and Aaron Taylor. "Flame Synthesis of Nanostructured Transition Metal Oxides." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-68987.

Full text
Abstract:
Various transition metal oxide nanostructures are synthesized using a novel probe-flame interaction method. An opposed flow flame of methane and oxygen enriched air provides a high-temperature reacting environment forming various metal oxide structures directly on the surface of pure metal probes. The unique thermal profile and chemical composition of the generated flame tends to convert almost pure bulk (99.9%) metallic materials into 1-D and 3-D structures of different chemical compositions and unique morphologies. The synthesized molybdenum, tungsten, and iron oxide structures exhibit uniqu
APA, Harvard, Vancouver, ISO, and other styles
10

Cheng, Z., G. Tempea, T. Brabec, K. Ferencz, Ch Spielmann, and F. Krausz. "Generation of intense diffraction-limited white light and 4-fs pulses." In The European Conference on Lasers and Electro-Optics. Optica Publishing Group, 1998. http://dx.doi.org/10.1364/cleo_europe.1998.cma2.

Full text
Abstract:
Ever since its discovery spectral continuum generation by ultrashort laser pulses has attracted much interest owing to its significance for ultrafast spectroscopy. In this paper we report, for what is to our knowledge the first time, the generation of nearly diffraction-limited truly white-light femtosecond continuum exhibiting comparable spectral intensities all over the range of 400-1100 nm. This performance could be obtained by propagating very short (≈ 25 fs) pulses through a capillary (or hollow waveguide) filled with some noble gas as a nonlinear medium. The key advantage of waveguiding
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Hollow bulb' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography