Log in

Relevant bibliographies by topics / Hot flow / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Hot flow.

Dissertations / Theses on the topic 'Hot flow'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Hot flow.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Sun, Yanxia 1976. "Hot-wire sensing of a micro-jet flow." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/89335.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gelwick, Katrina D. "Full of Hot Air: Heat Flow at the Medicine Lake Volcano Hot Spot, Modoc County, California." Oberlin College Honors Theses / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=oberlin1398936533.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ruh, Christian. "Performance of boiling and hot sparged agitated reactors." Thesis, University of Surrey, 1997. http://epubs.surrey.ac.uk/844300/.

Full text

Abstract:

In this dissertation the power draw, the mass transfer and the liquid mixing behaviour of boiling and hot sparged stirred tank reactors (STRs) were investigated. The power draw characteristics of six different impellers were studied under varying operating conditions and expressed in terms of the relative power draw, RPD. Generally the impellers showed considerably higher power draw in hot gassed than in comparable cold conditions. The main phenomenon in hot systems, the evaporation of liquid into a gas bubble suddenly exposed to it, was investigated experimentally. The growth of nitrogen and

APA, Harvard, Vancouver, ISO, and other styles

4

Cutbill, Sue. "A study of the turbulent flow of a high speed Coanda jet." Thesis, Durham University, 1998. http://etheses.dur.ac.uk/4743/.

Full text

Abstract:

This thesis presents an experimental investigation into a compressible turbulent wall jet issuing from a slot, and flowing over a surface with streamwise curvature, followed by a plane wall recovery region. The purpose of this data was to provide suitable test cases to aid in the design and validation of turbulence models used for curved flow situations in computational fluid dynamics. The presence of streamwise curvature provides an extra rate of strain to the flow which effects both the mean flow field and the turbulence structure. The effects of curvature are dependent on the ratio of the s

APA, Harvard, Vancouver, ISO, and other styles

5

Laurantzon, Fredrik. "Flow Measuring Techniques in Steady and Pulsating Compressible Flows." Licentiate thesis, KTH, Mekanik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-26344.

Full text

Abstract:

This thesis deals with flow measuring techniques applied on steady and pulsatingflows. Specifically, it is focused on gas flows where density changes canbe significant, i.e. compressible flows. In such flows only the mass flow ratehas a significance and not the volume flow rate since the latter depends onthe pressure. The motivation for the present study is found in the use of flowmeters for various purposes in the gas exchange system for internal combustionengines. Applications can be found for instance regarding measurements of airflow to the engine, or measurements of the amount of exhaust

APA, Harvard, Vancouver, ISO, and other styles

6

García, Fernández Víctor Gerardo. "Constitutive relations to model the hot flow of commercial purity copper." Doctoral thesis, Universitat Politècnica de Catalunya, 2004. http://hdl.handle.net/10803/6043.

Full text

Abstract:

Se ha llevado a cabo un estudio con el fin de observar diferencias en el comportamiento de fluencia en caliente de los cobres refinados al fuego con una pureza de 99.9%, dicho estudio ha permitido proponer modelos para predecir la curva esfuerzo-deformación y para predecir el tamaño de grano recristalizado dinámicamente. Los cobres refinados al fuego con una pureza de 99.9% se caracterizan por tener una composición residual de varios otros elementos, en algunos casos hasta 1000ppm. En los cobres con por lo menos 99.9% de pureza que tengan pocos elementos residuales, las diferencias observada

APA, Harvard, Vancouver, ISO, and other styles

7

Al-Hajeri, Mohammad Hamad. "Characterization of the fluid flow associated with ceramic candle filters." Thesis, University of Nottingham, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323258.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Herbach, Clauß-Michael, Peter Gippner, H. G. Ortlepp, and W. Wagner. "The binary decay of hot heavy nuclei: fission, evaporation, and also flow?" Forschungszentrum Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-31564.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ahrens, Denise [Verfasser]. "NOx-Formation in Reacting Premixed Jets in Hot Cross Flow / Denise Ahrens." München : Verlag Dr. Hut, 2015. http://d-nb.info/1077404093/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Herbach, Clauß-Michael, Peter Gippner, H. G. Ortlepp, and W. Wagner. "The binary decay of hot heavy nuclei: fission, evaporation, and also flow?" Forschungszentrum Rossendorf, 1996. https://hzdr.qucosa.de/id/qucosa%3A21983.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Zhao, Zhiling. "Investigations into Hot-Tip Scanning Electrochemical Microscopy and Redox Flow Battery Applications." University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron1563098472286652.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Lanspeary, Peter V. "Establishing very low speed, disturbance-free flow for anemometry in turbulent boundary layers." Title page, contents and summary only, 1997. http://web4.library.adelaide.edu.au/theses/09PH/09phl295.pdf.

Full text

Abstract:

Thesis (Ph. D.)--University of Adelaide, Dept. of Mechanical Engineering, 1998?<br>System requirements for accompanying computer disks: IBM-compatible computer. Other requirements: Fortran and/or C Compiler. Includes bibliographical references (p. 315-330).

APA, Harvard, Vancouver, ISO, and other styles

13

Seidel, T., and M. Beyer. "Two-phase flow experiments in a model of the hot leg of a pressurised water reactor." Helmholtz-Zentrum Dresden-Rossendorf, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-85349.

Full text

Abstract:

In order to investigate the two-phase flow behaviour in a complex reactor-typical geometry and to supply suitable data for CFD code validation, a model of the hot leg of a pressurised water reactor was built at FZD. The hot leg model is operated in the pressure chamber of the TOPFLOW test facility, which is used to perform high-pressure experiments under pressure equilibrium with the inside atmosphere of the chamber. This technique makes it possible to visualise the two-phase flow through large windows, also at reactor-typical pressure levels. In order to optimise the optical observation possi

APA, Harvard, Vancouver, ISO, and other styles

14

Alex, Alvisi, and Perez Adalberto. "Analysis of wall-mounted hot-wire probes." Thesis, KTH, Strömningsmekanik och Teknisk Akustik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-289564.

Full text

Abstract:

Flush-mounted cavity hot-wire probes have been around since two decades, but have typically not been applied as often compared to the traditional wall hot-wires mounted several wire diameters above the surface. While the latter suffer from heat conduction from the hot wire to the substrate in particular when used in air flows, the former is belived to significantly enhance the frequency response of the sensor. The recent work using a cavity hotwire by Gubian et al. (2019) came to the surprising conclusion that the magnitute of the fluctuating wall-shear stress τ+w,rms reaches an asymptotic val

APA, Harvard, Vancouver, ISO, and other styles

15

Hosder, Serhat. "Unsteady Skin-Friction Measurements on a Maneuvering Darpa2 Suboff Model." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/33582.

Full text

Abstract:

Steady and unsteady flow over a generic Suboff submarine model is studied. The skin-friction magnitudes are measured by using hot-film sensors each connected to a constant temperature anemometer. The local minima in the skin-friction magnitudes are used to obtain the separation locations. Steady static pressure measurements on the model surface are performed at 10Â° and 20Â° angles of attack. Steady and unsteady results are presented for two model configurations: barebody and sail-on-side case. The dynamic plunge-pitch-roll model mount (DyPPiR) is used to simulate the pitchup maneuvers. The p

APA, Harvard, Vancouver, ISO, and other styles

16

Dixon, Teresa Joan. "The effect of microstructure in the advances of hot rolling of steel." Thesis, University of Sheffield, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.286885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Farrar, B. "Hot-film anemometry in dispersed oil-water flows : Development of a hot-film anemometer based measurement technique for detailed studies of complex two-phase flows and its application.........bubbly water-kerosene and water-air flows." Thesis, University of Bradford, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234685.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Nabhani, Nader. "Hot-wire anemometry study of confined turbulent swirling flow : development of a hot-wire technique for measurement in confined turbulent swirling flow and an investigation of the effect of inlet flow rate and geometrical conditions on the velocity field." Thesis, University of Bradford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.256901.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Neumeister, William D. "Hot-Wire Anemometer for the Boundary Layer Data System." DigitalCommons@CalPoly, 2012. https://digitalcommons.calpoly.edu/theses/830.

Full text

Abstract:

Hot-wire anemometry has been routinely employed for laboratory measurements of turbulence for decades. This thesis presents a hot-wire anemometer suitable for use with the Boundary Layer Data System (BLDS). BLDS provides a unique platform for in- flight measurements because of its small, self-contained, robust design and flexible architecture. Addition of a hot-wire anemometer would provide BLDS with a sensor that could directly measure flow velocity fluctuations caused by turbulence. Hot-wires are commonly operated in constant-temperature mode for high frequency response, but require a carefu

APA, Harvard, Vancouver, ISO, and other styles

20

Gursoy, Zeynep Ece. "A Numerical Investigation Of Helicopter Flow Fields Including Thermal Effects Of Exhaust Hot Gases." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12611128/index.pdf.

Full text

Abstract:

This thesis investigates the flow field of a twin-engine, medium lift utility helicopter numerically. The effects of the exhaust hot gases emerging from the engines are accounted for in the numerical study. The commercial computational fluid dynamics (CFD) software ANSYS Fluent is employed for the computations. While the effects of engines are included in the computations through simple inlet and outlet boundary conditions, the main and tail rotors are simulated by the Virtual Blade Model in a time-averaged fashion. Forward flight at four different advance ratios and hover in ground effect are

APA, Harvard, Vancouver, ISO, and other styles

21

Åkerberg, Andreas. "CFD analyses of the gas flow inside the vessel of a hot isostatic press." Thesis, KTH, Kraft- och värmeteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101168.

Full text

Abstract:

Hot isostatic pressing (HIP) is a thermal treatment method that is used to consolidate, densify or bondcomponents and materials. Argon gas is commonly used as the pressure medium and is isostaticallyapplied to the material with an excess pressure of 500-2000 bar and a temperature of 500-2200oC. WithHIP treatment being a well-established technology for the last decades, one is now striving to obtain anincreased understanding of local details in the internal gas flow and heat flux inside the HIP apparatus.The main objective of this work is to assess the potential of using computational fluid dyn

APA, Harvard, Vancouver, ISO, and other styles

22

Laasraoui, Abdellatif. "Computer modelling of temperature, flow stress and microstructure during the hot rolling of steels." Thesis, McGill University, 1990. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=74284.

Full text

Abstract:

With the aim of simulating the hot rolling process, single and double hit compression tests were performed in the temperature range 800 to 1200$ sp circ$C at strain rates of 0.2 to 50 s$ sp{-1}$ on selected low carbon steels containing niobium, boron and copper. The stress/strain curves determined at high strain rates were corrected for adiabatic heating and constitutive equations were formulated. When dynamic recovery is the only softening mechanism, these involve a rate equation, consisting of a hyperbolic sine law, and an evolution equation with one internal variable. When dynamic recrystal

APA, Harvard, Vancouver, ISO, and other styles

23

Alghamdi, Faisal. "Mathematical modeling of mean flow stress (MFS) during hot strip rolling for HSLA steels." Thesis, McGill University, 2014. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=123280.

Full text

Abstract:

Based on experimental results using hot torsion, the effect of 'time gap', i.e. the time between roughing and finishing in a hot rolling schedule simulation, on mean flow stress (MFS) behavior for high-strength-low-alloyed (HSLA) steels was investigated. Two types of hot deformation were studied: an 'average' schedule with constant interpass time, in which each pass is identical but the temperature is decreasing at a constant rate throughout the rolling schedule simulation. In this type of schedule, two different interpass times of 5 and 30 seconds were used to study the influence of precipita

APA, Harvard, Vancouver, ISO, and other styles

24

Li, Datian. "Visualisaton of dynamic flow processes using a novel pulsed multi-element hot-wire anemometer." Thesis, Robert Gordon University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282866.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Lu, Hui-Ming. "Analysis of Heat Flow and Residual Stress Formation during Hot Plate Welding of Plycarbonate." The Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1392379062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Pauskar, Praveen M. "An integrated system for analysis of metal flow and microstructural evolution in hot rolling /." The Ohio State University, 1998. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487951907958535.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Phaiboonsilpa, Natthanon. "CHEMICAL CONVERSION OF LIGNOCELLULOSICS AS TREATED BY TWO-STEP SEMI-FLOW HOT-COMPRESSED WATER." Kyoto University, 2010. http://hdl.handle.net/2433/126764.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Vanier, Blake. "Detection of aerodynamic flow structures during hummingbird like flapping motion using hot film anemometry." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1456685.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Pugalia, Neeraj. "Numerical modeling of cold flow and hot gas desulfurization in a circulating fluidized bed." Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=2056.

Full text

Abstract:

Thesis (M.S.)--West Virginia University, 2001.<br>Title from document title page. Document formatted into pages; contains xvi, 119 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 103-106).

APA, Harvard, Vancouver, ISO, and other styles

30

Seidel, Tobias, Christoph Vallée, Dirk Lucas, Matthias Beyer, and Darlianto Deen. "Two-phase flow experiments in a model of the hot leg of a pressurised water reactor." Forschungszentrum Dresden, 2010. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-33535.

Full text

Abstract:

In order to investigate the two-phase flow behaviour in a complex reactor-typical geometry and to supply suitable data for CFD code validation, a model of the hot leg of a pressurised water reactor was built at FZD. The hot leg model is operated in the pressure chamber of the TOPFLOW test facility, which is used to perform high-pressure experiments under pressure equilibrium with the inside atmosphere of the chamber. This technique makes it possible to visualise the two-phase flow through large windows, also at reactor-typical pressure levels. In order to optimise the optical observation possi

APA, Harvard, Vancouver, ISO, and other styles

31

Imayama, Shintaro. "Studies of the rotating-disk boundary-layer flow." Doctoral thesis, KTH, Strömningsfysik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-158973.

Full text

Abstract:

The rotating-disk boundary layer is not only a simpler model for the study of cross-flow instability than swept-wing boundary layers but also a useful simplification of many industrial-flow applications where rotating configurations are present. For the rotating disk, it has been suggested that a local absolute instability, leading to a global instability, is responsible for the small variation in the observed laminar-turbulent transition Reynolds number however the exact nature of the transition is still not fully understood. This thesis aims to clarify certain aspects of the transition proce

APA, Harvard, Vancouver, ISO, and other styles

32

Zhao, Yongjun. "The cooling of a hot steel plate by an impinging water jet." Access electronically, 2005. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20060316.150622/index.html.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Kojok, Ali Tarraf. "Hot jet ignition delay characterization of methane and hydrogen at elevated temperatures." Thesis, Pro Quest, 2017. https://doi.org/10.7912/C2CH35.

Full text

Abstract:

Indiana University-Purdue University Indianapolis (IUPUI)<br>This study contributes to a better understanding of ignition by hot combustion gases which finds application in internal combustion chambers with pre-chamber ignition as well as in wave rotor engine applications. The experimental apparatus consists of two combustion chambers: a pre chamber that generates the transient hot jet of gas and a main chamber which contains the main fuel air blend under study. Variables considered are three fuel mixtures (Hydrogen, Methane, 50\% Hydrogen-Methane), initial pressure in the pre-chamber ranging

APA, Harvard, Vancouver, ISO, and other styles

34

Kwan, Y. B. P. "Processing and fluid flow characteristics of hot isostatically pressed porous alumina for aerostatic bearing applications." Thesis, Cranfield University, 1996. http://dspace.lib.cranfield.ac.uk/handle/1826/3690.

Full text

Abstract:

Despite their well known superior load and stiffness characteristics, the wide-spread use of porous aerostatic bearings in preference to other bearing types has been hampered by difficulties in controlling the permeability of the porous material during manufacture and machining, in addition to instability problems caused by the additional volume of air trapped amongst the pores. Recent development in porous aerostatic bearings centres around the use of a thin dense surface layer to overcome the stability problem. The production of single and two-layered porous ceramic structures for aerostatic

APA, Harvard, Vancouver, ISO, and other styles

35

Xu, Jason Jianxin. "Flow boiling heat transfer in the quenching of a hot surface under reduced gravity conditions." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0012/NQ35372.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Akalanne, Lucius Chidi. "The Effect of Forcing and Superimposed Streamwise Flow on the Colling of a Hot Object." Thesis, University of Bath, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.503365.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Rettew, A. Louisa. "The use of hot-wire anemometry in studying supersonic slot injection into a supersonic flow." Thesis, Virginia Tech, 1988. http://hdl.handle.net/10919/44083.

Full text

Abstract:

Tangential supersonic slot injection (M = 1.7) of air into a supersonic air stream (M = 2.91) was studied with a dual hot wire probe. This probe was used to simultaneously determine total temperature and mass flux. Mean profiles across the entire flow field at three axial stations (x/h = 4, 10, 20) were obtained, as well as the temperature and mass flux turbulence intensities. The probe can be used anywhere except at locations where features of the flow are smaller than the separation between the wires (0.18 mm). The calibration of the probe can be repeated with less than a three percent chang

APA, Harvard, Vancouver, ISO, and other styles

38

Harper, Ronald Jett. "A measurement system for turbulence properties in a three- dimensional flow using a data logger." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/53074.

Full text

Abstract:

An analysis is presented for hot wire/film anemometer measurement of mean velocities and turbulent stresses in a three dimensional flow field with a predominant flow direction. The experimental data can be taken with an automated traverse under the control of a digital data acquisition system which has been modified for this particular application.<br>Master of Science

APA, Harvard, Vancouver, ISO, and other styles

39

Kestel, Matthias. "Numerical modeling of moving carbonaceous particle conversion in hot environments." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2016. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-204732.

Full text

Abstract:

The design and optimization of entrained flow gasifiers is conducted more and more via computational fluid dynamics (CFD). A detailed resolution of single coal particles within such simulations is nowadays not possible due to computational limitations. Therefore the coal particle conversion is often represented by simple 0-D models. For an optimization of such 0-D models a precise understanding of the physical processes at the boundary layer and within the particle is necessary. In real gasifiers the particles experience Reynolds numbers up to 10000. However in the literature the conversion of

APA, Harvard, Vancouver, ISO, and other styles

40

Seidel, T., and M. Beyer. "Two-phase flow experiments in a model of the hot leg of a pressurised water reactor." Helmholtz-Zentrum Dresden-Rossendorf, 2011. https://hzdr.qucosa.de/id/qucosa%3A22146.

Full text

Abstract:

In order to investigate the two-phase flow behaviour in a complex reactor-typical geometry and to supply suitable data for CFD code validation, a model of the hot leg of a pressurised water reactor was built at FZD. The hot leg model is operated in the pressure chamber of the TOPFLOW test facility, which is used to perform high-pressure experiments under pressure equilibrium with the inside atmosphere of the chamber. This technique makes it possible to visualise the two-phase flow through large windows, also at reactor-typical pressure levels. In order to optimise the optical observation possi

APA, Harvard, Vancouver, ISO, and other styles

41

Muthanna, Chittiappa. "The Effects of Free Stream Turbulence on the Flow Field through a Compressor Cascade." Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/28753.

Full text

Abstract:

The flow through a compressor cascade with tip leakage has been studied experimentally. The cascade of GE rotor B section blades had an inlet angle of 65.1Âº, a stagger angle of 56.9Âº, and a solidity of 1.08. The final turning angle of the cascade was 11.8Âº. This compressor configuration was representative of the core compressor of an aircraft engine. The cascade was operated with a tip gap of 1.65%, and operated at a Reynolds number based on the chord length (0.254 m) of 388,000. Measurements were made at 8 axial locations to reveal the structure of the flow as it evolved through the c

APA, Harvard, Vancouver, ISO, and other styles

42

Laurantzon, Fredrik. "Flow measurements related to gas exchange applications." Doctoral thesis, KTH, Strömningsfysik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-94133.

Full text

Abstract:

This thesis deals with flow measuring techniques applied to steady and pulsating gas flows relevant to gas exchange systems for internal combustion engines. Gas flows in such environments are complex, i.e. they are inhomogeneous, three-dimensional, unsteady, non-isothermal and exhibit significant density changes. While a variety of flow metering devices are available and have been devised for such flow conditions, the performance of these flow metersis to a large extent undocumented when a strongly pulsatile motion is superposed on the already complex flow field. Nonetheless, gas flow meters a

APA, Harvard, Vancouver, ISO, and other styles

43

Boutazakhti, Mohamed. "The effect of jet mixing on the combustion efficiency of a hot, fuel-rich cross-flow." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0015/MQ54105.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Rock, Peter Joseph Jr. "Computational assessment of turbine rim seal system parametric variation on hot gas ingestion and flow pattern." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119310.

Full text

Abstract:

Thesis: S.M., Massachusetts Institute of Technology, Department of Aeronautics and Astronautics, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 125-127).<br>A design of experiments (DOE) is carried out to assess the turbine rim cavity system parametric variation on hot gas ingestion, flow pattern, and turbine stage efficiency. The parameters focused on are purge to main mass flow rate ratio, axial gap to rim radius ratio, radial gap to rim radius ratio, normalized axial position of the blade leading edge, and internal purge cavity radius ratios. Th

APA, Harvard, Vancouver, ISO, and other styles

45

Boháček, Jan. "EFFECT OF FLOW PARAMETERS OF WATER AND AIR ATOMIZED SPRAYS ON COOLING INTENSITY OF HOT SURFACES." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-233959.

Full text

Abstract:

Práce komplexně popisuje vodní a vodovzdušné chlazení pomocí metod CFD (Computational Fluid Dynamics) konkrétně s využitím software ANSYS FLUENT. Skládá se ze dvou hlavních částí, z nichž první se zabývá numerickým popisem jediné vodní kapky a druhá popisem směsí kapek představující paprsek válcové a ploché trysky. Je založena převážně na vícefázových modelech proudění a vlastních uživatelsky definovaných funkcí (User Defined Functions, UDF) představujících stěžejní část práce. Uvedené výpočtové modely jsou ve většině případů verifikovány pomocí experimentálních dat nebo jiných numerických mod

APA, Harvard, Vancouver, ISO, and other styles

46

Sigfrids, Timmy. "Hot wire and PIV studies of transonic turbulent wall-bounded flows." Licentiate thesis, KTH, Mechanics, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1577.

Full text

Abstract:

<p>The compressible turbulent boundary layer developing over atwo-dimensional bump which leads to a supersonic pocket with aterminating shock wave has been studied. The measurements havebeen made with hot-wire anemometry and Particle ImageVelocimetry (PIV).</p><p>A method to calibrate hot-wire probes in compressible ow hasbeen developed which take into account not only the ow velocitybut also the inuence of the Mach number, stagnation temperatureand uid density. The calibration unit consists of a small jetow facility, where the temperature can be varied. The hot wiresare calibrated in the pote

APA, Harvard, Vancouver, ISO, and other styles

47

Rahim, Amir. "Effect of nozzle guide vane shaping on high pressure turbine stage performance." Thesis, University of Oxford, 2017. https://ora.ox.ac.uk/objects/uuid:35274ff0-0ea7-47bc-adc3-388f136b9555.

Full text

Abstract:

This thesis presents a computational fluid dynamic (CFD) study of high pressure gas turbine blade design with different realistic inlet temperature and velocity boundary conditions. The effects of blade shaping and inlet conditions can only be fully understood by considering the aerodynamics and heat transfer concurrently; this is in contrast to the sequential method of blade design for aerodynamics followed by cooling. The inlet boundary conditions to the NGV simulations are governed by the existence of discrete fuel injectors in the combustion chamber. An appreciation of NGV shaping design u

APA, Harvard, Vancouver, ISO, and other styles

48

Asim, Muhammad. "HYDROCHEMICAL CHARACTERIZATION AND NUMERICAL MODELING OF GROUNDWATER FLOW IN A PART OF THE HIMALAYAN FORELAND BASIN." Kent State University / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=kent1132262925.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Dongare, Vishal S. "Hot Extrusion of Carbon Nanotube - Magnesium Matrix Composite Wire." Ohio University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1415975904.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Beyer, Matthias, Dirk Lucas, Heiko Pietruske, and Lutz Szalinski. "Two-Phase Flow Experiments on Counter-Current Flow Limitation in a model of the Hot Leg of a Pressurized Water Reactor (2015 test series)." Helmholtz-Zentrum Dresden-Rossendorf, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-216094.

Full text

Abstract:

Counter-Current Flow Limitation (CCFL) is of importance for PWR safety analyses in several accident scenarios connected with loss of coolant. Basing on the experiences obtained during a first series of hot leg tests now new experiments on counter-current flow limitation were conducted in the TOPFLOW pressure vessel. The test series comprises air-water tests at 1 and 2 bar as well as steam-water tests at 10, 25 and 50 bar. During the experiments the flow structure was observed along the hot leg model using a high-speed camera and web-cams. In addition pressure was measured at several positions

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!