Log in

Relevant bibliographies by topics / Hot solution / Journal articles

To see the other types of publications on this topic, follow the link: Hot solution.

Journal articles on the topic 'Hot solution'

Author: Grafiati

Published: 5 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Hot solution.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

HRDY, DANIEL B. "Hot solution." Nature 345, no. 6274 (1990): 392. http://dx.doi.org/10.1038/345392a0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Haslauer, Rainer. "Hot Spot Solution." ADHESION ADHESIVES&SEALANTS 15, no. 1 (2018): 10–13. http://dx.doi.org/10.1007/s35784-018-0004-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Daley, Henry O. "Heat of Solution: Hot Packs." Journal of Chemical Education 71, no. 9 (1994): 791. http://dx.doi.org/10.1021/ed071p791.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ahmed, Mainuddin. "Spinning hot multi-black hole solution." Astroparticle Physics 20, no. 5 (2004): 609–12. http://dx.doi.org/10.1016/j.astropartphys.2003.08.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kichenassamy, Satyanad. "Hot Spots in the Weak Detonation Problem and Special Relativity." Axioms 10, no. 4 (2021): 311. http://dx.doi.org/10.3390/axioms10040311.

Full text

Abstract:

Problem statement: The initiation of a detonation in an explosive gaseous mixture in the high activation energy regime, in three space dimensions, typically leads to the formation of a singularity at one point, the “hot spot”. It would be suitable to have a description of the physical quantities in a full neighborhood of the hot spot. Results of this paper: (1) To achieve this, it is necessary to replace the blow-up time, or time when the hot spot first occurs, by the blow-up surface in four dimensions, which is the set of all hot spots for a class of observers related to one another by a Lore

APA, Harvard, Vancouver, ISO, and other styles

6

Snegireva, Svetlana, Aleksey Platonov, Dmitriy Parinov, Ilya Medvedev, and Aleksandra Kiseleva. "IMPROVING THE QUALITY OF IMPREGNATION OF BIRCH WOOD IN THE PRODUCTION OF SLEEPERS." Forestry Engineering Journal 9, no. 4 (2020): 126–33. http://dx.doi.org/10.34220/issn.2222-7962/2019.4/14.

Full text

Abstract:

Wood is widely used for the production of sleepers in Russia. Sleepers made of natural wood have the disadvantage – short service life. It is possible to increase the service life of wooden sleepers using pressed (modified) wood for their manufacture. Wood pressing is one of the most promising areas for improving its physical and mechanical properties. Pressed wood, in its turn, has a drawback – the ability to significantly change size and shape when humidity changes, as well as low biological resistance. The solution to this problem is to impregnate wood with an antiseptic solution with a sta

APA, Harvard, Vancouver, ISO, and other styles

7

Zhang, Zhan Jun. "One Effective Solution of Hot Swap Application." Advanced Materials Research 591-593 (November 2012): 441–44. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.441.

Full text

Abstract:

In the paper, mainly introduce one new solution for power and signals hot swap function. The solution is not need special connector, as slotting jack and special insert way, only use the normal connector, such as simple board to board connector. Even board to wire connector, could mount the slave on the host or place slave horizontally with host, so the inserting or plugging way is flexible. This need design one protect circuit for this effective solution of Hot Swap Application.

APA, Harvard, Vancouver, ISO, and other styles

8

Uematsu, Seishou, Masahiro Anan, Miho Matsuura, et al. "DENATURED FIBRINOGEN CONCENTRATE DISSOLVED BY HOT SOLUTION." Japanese Journal of Transfusion and Cell Therapy 65, no. 3 (2019): 517–18. http://dx.doi.org/10.3925/jjtc.65.517.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

López, Beatriz, Beatriz Pereda, Felipe Bastos, and J. M. Rodriguez-Ibabe. "Study of Nb Solubility in Hot Charging Process." Materials Science Forum 1016 (January 2021): 832–39. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.832.

Full text

Abstract:

The aim of this work is to investigate the dissolution behavior of Nb in hot charging hot rolling configurations. To do so, an indirect experimental procedure is used to quantify the amount of Nb present in solution before rolling. The method is based on the effect of dissolved Nb on static recrystallization kinetics due to its solute drag effect. After different thermal cycles, simulating cold and hot charging conditions, double hit torsion tests have been performed with a 0.23%C steel microalloyed with 0.03% Nb. By means of these tests, the static softening behavior has been determined. Comp

APA, Harvard, Vancouver, ISO, and other styles

10

Huang, Y., X. Duan, X. Lan, et al. "Time-dependent neutral-plasma isothermal expansions into a vacuum." Laser and Particle Beams 26, no. 4 (2008): 671–75. http://dx.doi.org/10.1017/s0263034608000748.

Full text

Abstract:

AbstractA time-dependent solution for neutral-plasma isothermal expansions into a vacuum in a special-transformation coordinate system is obtained. In this new coordinate system, the special self-similar solutions of it were given by Huang and co-workers (Appl. Phys. Lett. 92, 031501). Combining the time-dependent solution and the quasi-linear increase of the electron density due to the hot-electron recirculation, an analytic model is proposed to reveal the influence of the hot-electron recirculation on the increase of electric field and on the acceleration of ions of different masses and char

APA, Harvard, Vancouver, ISO, and other styles

11

Subramanian, B., and J. C. Chato. "Safe Touch Temperatures for Hot Plates." Journal of Biomechanical Engineering 120, no. 6 (1998): 727–36. http://dx.doi.org/10.1115/1.2834886.

Full text

Abstract:

A finite difference heat transfer model has been developed to predict the Safe Touch Temperatures (STT) for plates made of different materials. SST can be defined as the highest temperature at which no pain is felt when the surface is touched for a long enough period to allow safe handling of the equipment. The criterion used to quantify damage is the “damage function” that was originally proposed by Henriques and Moritz. There are several uncertainties present in the physiological and thermal properties of the skin that give rise to a solution range rather than a single solution. Certain simp

APA, Harvard, Vancouver, ISO, and other styles

12

Wang, Y. L., H. C. Geng, B. Zhu, Y. S. Zhang, X. Q. Ren, and X. P. Ren. "Investigation on effect of high-efficiency solid solution and hot stamping process on microstructure evolution and mechanical properties of high-strength aluminum alloy." IOP Conference Series: Materials Science and Engineering 1307, no. 1 (2024): 012049. http://dx.doi.org/10.1088/1757-899x/1307/1/012049.

Full text

Abstract:

Abstract Aluminum alloy has become an important lightweight material in the automotive industry due to its excellent performance. The development of hot stamping technology has effectively promoted the application of high-strength aluminum alloys in auto parts. However, aluminum alloy hot stamping requires a long time for solid solution and aging heat treatment, which hinders its mass production application in the existing mature hot stamping production line. Therefore, this paper studies the effect of a high-efficiency solid solution and hot stamping process on the microstructure and mechanic

APA, Harvard, Vancouver, ISO, and other styles

13

Lee, Won-Tae, Shuanglei Li, and Tae-Hyun Nam. "Effect of Cold Rolling and Hot Rolling on Recrystallization Texture and Superelastic Properties of Ti–30Zr–10Nb–2Sn Shape Memory Alloy." Science of Advanced Materials 13, no. 11 (2021): 2265–69. http://dx.doi.org/10.1166/sam.2021.4085.

Full text

Abstract:

A comparative study on the microstructure, texture evolution, and superelasticity of cold-rolled and hot-rolled Ti–30Zr–10Nb–2Sn (at.%) alloys was performed using electron back-scattered diffraction (EBSD), X-ray diffraction (XRD), and tensile test. The cold-rolled sheet was solution-treated at 1173 K after a 98.0% cold rolling at room temperature. Hot rolling was carried out at 1273 K. Both cold-rolled and hot-rolled sheets were solution-treated at 1173 K for 1.8 ks. Both solution-treated alloy specimens consisted of a single β-phase at room temperature. A very high (200)β peak was observed f

APA, Harvard, Vancouver, ISO, and other styles

14

Nonaka, Hiroshi, Kunihiko Kasuya, and Yukihiko Matsumura. "Electrochemical Oxidation of Methanol in Hot Aqueous Solution." KAGAKU KOGAKU RONBUNSHU 29, no. 2 (2003): 184–87. http://dx.doi.org/10.1252/kakoronbunshu.29.184.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Son, Jeonghyeon, Seol Hwa Park, Hyun Jung Jung, Sun Jong You, and Beob Gyun Kim. "Effects of Drying Methods and Blanching on Nutrient Utilization in Black Soldier Fly Larva Meals Based on In Vitro Assays for Pigs." Animals 13, no. 5 (2023): 858. http://dx.doi.org/10.3390/ani13050858.

Full text

Abstract:

The objective was to determine the effects of drying and blanching methods on the nutrient utilization of black soldier fly larva (BSFL; Hermetia illucens) meal by pigs using in vitro assays. Two-step and three-step in vitro assays were employed to simulate the gastrointestinal tract of pigs. Four BSFL meals were prepared using the following pretreatment methods: (1) microwave drying at 80 °C for 32 min, (2) hot-air drying at 60 °C for 17 h, (3) blanching for 5 min in boiling water and hot-air drying at 60 °C for 17 h, and (4) 2% citric acid solution blanching for 5 min in boiling solution and

APA, Harvard, Vancouver, ISO, and other styles

16

Tsai, K. C., J. L. Morris, and D. Cubicciotti. "Corrosion Chemistry of Chromium Carbide in Hot Alkali." Corrosion 41, no. 10 (1985): 607–10. http://dx.doi.org/10.5006/1.3582991.

Full text

Abstract:

Abstract The corrosion behavior of Cr23C6 was investigated at elevated temperatures in alkaline solutions. The corrosion reaction of chromium carbide occurs via an electrochemical process. The rate of Cr23C6 dissolution in alkaline solution is rapid compared to that in acid, and its behavior is closely related to that of its metal constituent. Chemical analysis of the corrosion products reveals that CrO4= and CO3= are the two major components, although HCO2− and C2O4= are also formed.

APA, Harvard, Vancouver, ISO, and other styles

17

Tan, Chao Yi, Hui Zhu, Hai Hua Hu, Meng Meng Wang, and Han Qing Wang. "Analysis on the Technical Solutions of the Heat Source of the Geothermal Heat Pump System." Advanced Materials Research 953-954 (June 2014): 650–54. http://dx.doi.org/10.4028/www.scientific.net/amr.953-954.650.

Full text

Abstract:

Taking the geothermal heat pump system in the campus of Hunan University of Technology for example, three technical solutions of the heat source of the system were analyzed in terms of the condensing heat load, the annual unbalanced heat load and the energy efficiency ratio (EER) of the system. In addition, comparison was conducted among the solutions. The results indicate that the solution 3, which has a cold and hot water integrative unit and hot water unit connected in series, meanwhile has a cooling tower for auxiliary cooling, shows better performance among all the solutions. The analysis

APA, Harvard, Vancouver, ISO, and other styles

18

Khoo, Kimberly H., Joshua S. Yoon, Charles S. Hultman, and Julie Caffrey. "621 Ethical Considerations to Prevent Burns in Patients Who Smoke While Receiving Home Oxygen Therapy." Journal of Burn Care & Research 43, Supplement_1 (2022): S152. http://dx.doi.org/10.1093/jbcr/irac012.249.

Full text

Abstract:

Abstract Introduction Home oxygen therapy (HOT) is prescribed to patients with pulmonary dysfunction as a means of improving survival and quality of life. However, ignition of HOT can lead to burns that carry significant morbidity and mortality. This is especially true for patients who actively smoke while on HOT, with prior studies showing that 87.3% of HOT-related burns were due to smoking. An ethical issue thus arises for providers who routinely treat this patient population: how to balance providing beneficial treatment for a patient with the responsibility to protect that patient from suf

APA, Harvard, Vancouver, ISO, and other styles

19

Esin, Ann A. "Heating and Cooling of Hot Accretion Flows by Non Local Radiation." International Astronomical Union Colloquium 163 (1997): 700. http://dx.doi.org/10.1017/s0252921100043505.

Full text

Abstract:

AbstractHot optically thin accretion flow solutions are often used to model X-ray binaries and active galactic nuclei. Recently two new classes of advection-dominated models have been proposed: a two-temperature solution (Narayan & Yi 1995, ApJ, 452, 710; Abramowicz et al. 1995, ApJ, 438, L37), and a one-temperature solution (Esin et al. 1996, ApJ, 465, 312). Though detailed numerical spectra of advection-dominated flows include global radiative transfer effects (e.g. Narayan 1996, ApJ, 462, 136), analytical calculations of the physical properties of these accretion solutions generally ign

APA, Harvard, Vancouver, ISO, and other styles

20

Vaissiere, J. C., J. P. Nougier, M. Fadel, L. Hlou, and P. Kocevar. "Numerical solution of coupled steady-state hot-phonon–hot-electron Boltzmann equations in InP." Physical Review B 46, no. 20 (1992): 13082–99. http://dx.doi.org/10.1103/physrevb.46.13082.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Gorinov, Yu A., and P. N. Anisimov. "Icreasing the efficiency of district heating supply systems by local heat distribution station modernation." Power engineering: research, equipment, technology 24, no. 3 (2022): 101–11. http://dx.doi.org/10.30724/1998-9903-2022-24-3-101-111.

Full text

Abstract:

The PURPOSE of the study is to improve the efficiency of district heating systems. To achieve this purpose, the following tasks must be completed. To consider the problems of functioning of an open heat supply system functioning. Perform an analysis of technical solutions for the modernization of local heat distribution and metering station are presented. To develop a technological scheme of local heat distribution station with a hot-water supply system. To determine the main technical, economic and investment indicators of the developed technical solution.MATERIALS AND METHODS. Measurements w

APA, Harvard, Vancouver, ISO, and other styles

22

Frakes, Jennifer. "Right Roof Solution Can Take the Heat!" CoatingsPro 14, no. 5 (2014): 72–76. https://doi.org/10.5006/cp2014_14_5-72.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Li, Danyang, Yuqi Zhang, Jie Song, Hui Liu, and Jingqing Jiang. "Energy Saving with Zero Hot Spots: A Novel Power Control Approach for Sustainable and Stable Data Centers." Sustainability 14, no. 15 (2022): 9005. http://dx.doi.org/10.3390/su14159005.

Full text

Abstract:

Data centers with high energy consumption have become a threat to urban sustainability on electric energy. In contrast, hot spots in a data center are another threat to server stability, which leads to unsafe data storage and service provisioning to urban lives. However, state-of-the-art works cannot ensure sustainability and stability together because they fail to consider them holistically. For example, some existing works eliminate the hot spots by increasing cooling power, which results in lower sustainability. In contrast, others reduce energy consumption by saving the cooling power, whic

APA, Harvard, Vancouver, ISO, and other styles

24

Huynh, Chinh Nguyen. "Fast detecting Hot-IPs in high speed networks." Science and Technology Development Journal 18, no. 3 (2015): 242–53. http://dx.doi.org/10.32508/stdj.v18i3.841.

Full text

Abstract:

Hot-IPs, hosts appear with high frequency in networks, cause many threats for systems such as denial of service attacks or Internet worms. One of their main characteristics is quickly sending a large number of packets to victims in a short time in network. This paper presents a solution to find Hot-IPs by using non-adaptive group testing approach. The proposed solution has been implemented in combination with the distributed architecture and parallel processing techniques to quickly detect Hot-IPs in ISP networks. Experimental results can be applied to detect Hot-IPs in ISP networks.

APA, Harvard, Vancouver, ISO, and other styles

25

Karan, Ebrahim, Matin Mohammadpour, Somayeh Asadi, and Atefeh Mohammadpour. "From waste heat to domestic hot water; a sustainable and financially viable solution?" IOP Conference Series: Earth and Environmental Science 1101, no. 6 (2022): 062038. http://dx.doi.org/10.1088/1755-1315/1101/6/062038.

Full text

Abstract:

Abstract Modern waste management facilities that combust waste to generate domestic hot water or electricity are more sustainable than landfilling but not necessarily more viable. Space limitations and advances in sorting waste before burning it may financially justify the construction of waste combustion facilities. In addition, building small-scale incinerators close to demand centres (e.g., homes) can provide a resilient option compared to centralized systems. This study aims to financially assess the use of an incinerator to provide domestic hot water for homes. First, data regarding hot w

APA, Harvard, Vancouver, ISO, and other styles

26

Nasrin, Taslima Ayesha Aktar, Latifa Yasmin, Most Sadia Arfin, Mohammad Mainuddin Molla, and Md Nazim Uddin. "Effect of Hot Water Treatment with Organic Additives in Fresh Cut Carrot." Journal of Agricultural Science and Food Technology 7, no. 1 (2021): 1–9. http://dx.doi.org/10.36630/jasft_20028.

Full text

Abstract:

Fresh cut carrot (Daucus carota L.) slices were treated with hot (60°C) water and hot aqueous solution (2% sodium chloride, 2% citric acid and 10% lime juice) for 1 min and then surface water was removed. Following treatment, fresh-cut carrot slices were kept in a polypropylene (PP) box and stored in a refrigerator (4±1°C and 50±5% RH) for 12 days. The effectiveness of the treatments in extending shelf life was evaluated by determining respiration rate, firmness, weight loss, external colour, whiteness index (WI), some chemical parameters (ascorbic acid content, TSS, acidity, pH, total sugar,

APA, Harvard, Vancouver, ISO, and other styles

27

Jacolot, Ronan, Didier Huin, Artem Marmulev, and Eliette Mathey. "Hot Rolled Coil Property Heterogeneities due to Coil Cooling: Impact and Prediction." Key Engineering Materials 622-623 (September 2014): 919–28. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.919.

Full text

Abstract:

The importance of coil cooling conditions on mechanical properties uniformity of HSLA and AHSS steel grades is discussed. It is namely shown that hot rolled coil under conventional industrial production can be cooled non-uniformly. That is why to predict correctly the final steel microstructure and mechanical properties of hot-rolled products an accurate description of not only run-out table condition but also of coil cooling should be done. Two solutions to provide accurate description of coil cooling were tested. First one is to use 2D finite element (FE) thermal model. When coupled with the

APA, Harvard, Vancouver, ISO, and other styles

28

Kubo, Tomoko, Eisuke Tadaoka, and Hiromitsu Kozuka. "Formation of silica coating films from spin-on polysilazane at room temperature and their stability in hot water." Journal of Materials Research 19, no. 2 (2004): 635–42. http://dx.doi.org/10.1557/jmr.2004.19.2.635.

Full text

Abstract:

Spin-coating was conducted on single-crystal silicon substrates using a xylene solution of perhydropolysilazane (PHPS) to obtain 0.14-μm-thick PHPS films. The PHPS films obtained were suspended over various acidic and basic solutions at room temperature so that they were exposed to the vapors from the solutions. PHPS-to-silica film conversion was studied by infrared absorption spectroscopy, and the stability of the exposed films in hot water was examined by soaking the films in 80 °C water. The as-deposited PHPS films were found to be dissolved in water. When the PHPS films were suspended over

APA, Harvard, Vancouver, ISO, and other styles

29

Song, Yansong, Xiaojun Hu, and Kuochih Chou. "Effect of multiphase flux with BaO addition on phosphorus partition." Metallurgical Research & Technology 119, no. 6 (2022): 612. http://dx.doi.org/10.1051/metal/2022099.

Full text

Abstract:

It is important to clarify the effect of BaO in phosphorus partition of multiphase flux. In current work, the slag CaO-SiO2-FetO-P2O5 with different contents of BaO was cooled from 1873 K to 1673 K to investigate the effect of BaO on phosphorus partition of solid solution. The phosphorous partition between the solid solution phase and liquid phase was obtained. In order to further inspect the effect of BaO on phosphorus partition, the experiment of reaction between 2CaO · SiO2 (C2S)-FetO/Fe2O3-BaO slag and hot metal was carried out. Furthermore, the CaO-FetO slag was also studied to compare th

APA, Harvard, Vancouver, ISO, and other styles

30

Xu, Xiao, Ze Yu Li, Gang Feng Xiao, and Qin Xiang Xia. "Solution Treatment Process of Haynes 230 Cylindrical Blank Used for Hot Flow Spinning." Defect and Diffusion Forum 385 (July 2018): 373–78. http://dx.doi.org/10.4028/www.scientific.net/ddf.385.373.

Full text

Abstract:

Hot flow spinning is one of the most effective methods to manufacture the cylindrical parts of nickel-based superalloy. However, crack occurs easily in the hot flow spinning process of Haynes230 alloy when the cylindrical blanks are obtained by forging and wire-electrode cutting billet due to the severe segregation of carbides existed in the microstructure of the Haynes230 forging billet. The solution treatment process of Haynes230 blank is put forward to obtain the cylindrical blank with homogeneous and fine grained microstructure used for hot flow spinning. The influence of solution treatmen

APA, Harvard, Vancouver, ISO, and other styles

31

Gurin, Konstantin Igorevich, Ivan Petrovich Pogorelsky, Marina Anatol’evna Cheshuina, et al. "The effectiveness of the application of disinfectant using a hot fog generator." Disinfection affairs, no. 1 (March 2022): 5–13. http://dx.doi.org/10.35411/2076-457x-2022-1-5-13.

Full text

Abstract:

The sporicidal and bactericidal effect of hydrogen peroxide using a hot fog generator on the viability and ultrastructure of spores of the vaccine strain Bacillus anthracis STI-1 was studied using a bacteriological method and electron microscopy. The high efficiency of disinfection treatment of various surfaces has been established, which consists in the fact that within 10-20 minutes there is a complete death of test microorganism that contaminate the surfaces treated with hot fog. It has been experimentally proven that in the process of generating hot fog, the concentration of working disinf

APA, Harvard, Vancouver, ISO, and other styles

32

Hafenstein, Stephan, Leonhard Hitzler, Enes Sert, Andreas Öchsner, Markus Merkel, and Ewald Werner. "Hot Isostatic Pressing of Aluminum–Silicon Alloys Fabricated by Laser Powder-Bed Fusion." Technologies 8, no. 3 (2020): 48. http://dx.doi.org/10.3390/technologies8030048.

Full text

Abstract:

Hot isostatic pressing can be utilized to reduce the anisotropic mechanical properties of Al–Si–Mg alloys fabricated by laser powder-bed fusion (L-PBF). The implementation of post processing densification processes can open up new fields of application by meeting high quality requirements defined by aircraft and automotive industries. A gas pressure of 75 MPa during hot isostatic pressing lowers the critical cooling rate required to achieve a supersaturated solid solution. Direct aging uses this pressure related effect during heat treatment in modern hot isostatic presses, which offer advanced

APA, Harvard, Vancouver, ISO, and other styles

33

Dudkin, Kostiantyn, Halyna Prokofieva, Vyacheslav Irodov, et al. "TUBULAR GAS HEATERS FOR FREE VOLUME WATER HEATING AS AN ALTERNATIVE TO HOT WATER BOILERS." International Journal of Advanced Research 13, no. 06 (2025): 907–14. https://doi.org/10.21474/ijar01/21147.

Full text

Abstract:

The mathematical model of a tubular gas heater in an open volume has the form of a hydraulic circuit with adjustable parameters in the form of ordinary nonlinear differential equations. Two criteria the criterion of thermal efficiency and the criterion of material intensity of the heater are allocated for setting the problem. For the solution of the problem of optimal design of tubular heater the binary relation of selection of the most preferable solutions is constructed, and the search of the solution is carried out by means of the algorithm of evolutionary search with several branches of ev

APA, Harvard, Vancouver, ISO, and other styles

34

Lecorps, Benjamin, Emeline Nogues, Marina A. G. von Keyserlingk, and Daniel M. Weary. "Pessimistic dairy calves are more vulnerable to pain-induced anhedonia." PLOS ONE 15, no. 11 (2020): e0242100. http://dx.doi.org/10.1371/journal.pone.0242100.

Full text

Abstract:

Pain induces deficits in appreciation of rewards (i.e. anhedonia) and variation in response to pain may be partly explained by individual differences in general expectations (i.e. optimism). Dairy calves are routinely subjected to painful procedures such as hot-iron disbudding. We tested if female Holstein calves (n = 17) display signs of anhedonia (as evidenced by reduced consumption of a sweet solution) after hot-iron disbudding (performed under general and local anesthesia), and whether individual differences in optimism explain the variation in this response. Individual variation in optimi

APA, Harvard, Vancouver, ISO, and other styles

35

Hasegawa, M., Y. Kashiwaya, and M. Iwase. "Thermodynamic Properties of Solid Solutions between Di-calcium Silicate and Tri-calcium Phosphate." High Temperature Materials and Processes 31, no. 4-5 (2012): 421–30. http://dx.doi.org/10.1515/htmp-2012-0077.

Full text

Abstract:

AbstractFor a better understanding of phosphorus removal from hot metal, the Gibbs free energies of solid solutions between di-calcium silicate and tri-calcium phosphate were derived through applications of solutions models. The regular solution model with the parameters determined in this study gave the activities of the components thermodynamically consistent with the literature data and the phase diagrams.

APA, Harvard, Vancouver, ISO, and other styles

36

Majee, Arghya, and Alois Würger. "Thermocharge of a hot spot in an electrolyte solution." Soft Matter 9, no. 7 (2013): 2145. http://dx.doi.org/10.1039/c2sm26680f.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Goldrath, Milton H., Marcelo Barrionuevo, and Mujtaba Husain. "Endometrial ablation by hysteroscopic instillation of hot saline solution." Journal of the American Association of Gynecologic Laparoscopists 4, no. 2 (1997): 235–40. http://dx.doi.org/10.1016/s1074-3804(97)80016-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Suomi, Johanna, Tiina Ylinen, Markus Håkansson, et al. "Hot electron-induced electrochemiluminescence of fluorescein in aqueous solution." Journal of Electroanalytical Chemistry 586, no. 1 (2006): 49–55. http://dx.doi.org/10.1016/j.jelechem.2005.09.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Son, Jeonghyeon, Seol Hwa Park, Hyun Jung Jung, and Beob Gyun G. Kim. "PSXV-18 Effects of Drying Methods for Black Soldier fly Larva Meals on in Vitro Nutrient Disappearance." Journal of Animal Science 100, Supplement_3 (2022): 340. http://dx.doi.org/10.1093/jas/skac247.621.

Full text

Abstract:

Abstract The objective was to determine the effects of different drying methods on nutrient utilization of black soldier fly (BSF; Hermetia illucens) larva meals using in vitro assays. Two-step and 3-step in vitro assays were employed to simulate the gastrointestinal tract of pigs. Four methods were used to obtain BSF larva meal sources: 1) microwave-drying for 32 min, 2) hot-air drying at 60°C for 17 h, 3) water blanching for 5 min and hot-air drying for 17 h, and 4) 2% citric acid solution blanching for 5 min and hot-air drying for 17 h. After the drying process, each BSF larva was defatted

APA, Harvard, Vancouver, ISO, and other styles

40

Lu, Hong Zhou, Shi Qi Zhang, Bian Jian, Hardy Mohrbacher, and Ai Min Guo. "Solutions for Hydrogen-Induced Delayed Fracture in Hot Stamping." Advanced Materials Research 1063 (December 2014): 32–36. http://dx.doi.org/10.4028/www.scientific.net/amr.1063.32.

Full text

Abstract:

One of the main targets in automotive industry is to reduce the weight of vehicle as well as increase the safety. To accomplish this goal, press-hardening steel and hot stamping parts have been used in car body. However, the possibility of hydrogen-induced delayed fracture (HDF) of hot stamping parts exits, which will decrease the car’s passive safety. A solution has been presented to reduce the sensitivity of HDF and improve hydrogen-induced delayed fracture resistance (HDFR) by Niobium micro-alloying technology. Traditional press-hardening steel 22MnB5 and new steel 22MnBNb2, 22MnBNb5 and 22

APA, Harvard, Vancouver, ISO, and other styles

41

Gilmanshina, T. R., I. V. Dubova, N. V. Vasyunina, V. A. Matyushentsev, S. I. Lytkina, and B. P. Kulikov. "Development of Hardware and Technological Scheme of Processing of Sodium and Potassium-Containing Waste Of Foundry Production." Ecology and Industry of Russia 26, no. 6 (2022): 22–26. http://dx.doi.org/10.18412/1816-0395-2022-6-22-26.

Full text

Abstract:

A solution of the ecological problem of processing waste from metallurgical production is proposed. The results of research on the extraction of sodium and potassium chlorides from foundry slags are shown. A technological scheme based on leaching in hot aqueous solutions with subsequent evaporation is presented.

APA, Harvard, Vancouver, ISO, and other styles

42

Pu, Xiangheng, Li Zhou, Zhengshan Chen, and Wenge Zhou. "Constraints on the source of ions in the Jianhe hot springs in Guizhou Province, China by water-rock interaction experiments." PLOS One 20, no. 6 (2025): e0324054. https://doi.org/10.1371/journal.pone.0324054.

Full text

Abstract:

Due to the lack of experimental studies, the effect of water-rock interactions on the hydrochemical characteristics of hot springs within belted reservoir remains poorly understood. To solve this issue, we analyzed the hydrochemical characteristics of the hot springs and the geochemical features of the reservoir rocks in the Jianhe hot springs in Guizhou province, SW China. All water sample analyses adhered to the China analytical procedures (GB 8538−2022), then carried out water-rock interacting experiments with representative reservoir rocks (e.g., metamorphosed tuff, metamorphosed quartz sa

APA, Harvard, Vancouver, ISO, and other styles

43

Streater, R. F. "Stability of a Hot Smoluchowski Fluid." Open Systems & Information Dynamics 08, no. 01 (2001): 19–27. http://dx.doi.org/10.1023/a:1011305631893.

Full text

Abstract:

We study coupled nonlinear parabolic equations for a fluid described by a material density ρ and a temperature Θ, both functions of space and time. In one dimension, we find some stationary solutions corresponding to fixing the temperature on the boundary, with no-escape boundary conditions for the material. For the special case, where the temperature on the boundary is the same at both ends, the linearized equations for small perturbations about a stationary solution at uniform temperature and density are derived; they are subject to boundary conditions, Dirichlet for Θ and no-flow conditions

APA, Harvard, Vancouver, ISO, and other styles

44

Tokar, Adriana, Dan Negoiţescu, Marius Adam, Dănuț Tokar, and Arina Negoiţescu. "The waste energy recovery, an energy-efficient solution for the industrial sector." E3S Web of Conferences 111 (2019): 06063. http://dx.doi.org/10.1051/e3sconf/201911106063.

Full text

Abstract:

One of the world’s topical issues is the necessity of energy consumption reduction in order to conserve less and less natural resources and protect the environment. The article deals with the need to develop the waste energy recovery solutions that reduce energy consumption among the industrial consumers. In order to identify the sources with recoverable potential and establish energy recovery solutions, thermography of the hot air and hot gas exhaust circuits from industrial technological facilities were performed, followed by monitoring the operation parameters and measuring the energy consu

APA, Harvard, Vancouver, ISO, and other styles

45

Kang, Le, Hong Qiang Nian, Xiang Ma, and Jin Feng Xia. "Evaluation of the Corrosivity of CaF₂ in Hot Water and 10mol%HF Solution." Key Engineering Materials 680 (February 2016): 244–47. http://dx.doi.org/10.4028/www.scientific.net/kem.680.244.

Full text

Abstract:

Evaluation the corrosivity of CaF2 in hot water and 10mol%HF solution was studies.Theprepared powder and sintered ceramic was characterized by XRD and SEM technologies. we could conclude that impurities (such as CaO and CaCO3) effected the porperties of CaF2, the grain size is smaller, the corrosion resistance is lower. The CaF2 of corrosion resistance was stronger in HF solution than hot water.

APA, Harvard, Vancouver, ISO, and other styles

46

Darmawan, Budi, Suthami Ariessaputra, and Muhammad Alfarizi Putra. "Rancang Bangun Hot Plate Magnetic Stirrer Berbasis Mikrokontroler." DIELEKTRIKA 10, no. 2 (2023): 195–202. http://dx.doi.org/10.29303/dielektrika.v10i2.344.

Full text

Abstract:

Chemical laboratories require additional equipment that is used as a mixer into the solution or chemical to be studied. The mechanism that is often used to accelerate the process of dissolving or mixing chemicals is heating and stirring. In addition to dissolving faster, the resulting solution will also be more homogeneous. In this research a Hot Plate Magnetic Stirrer was designed and manufactured by setting the time, temperature and stirring speed via a keypad so that accurate time, temperature and speed were obtained. The Hot Plate Magnetic Stirrer made in this study uses an infrared sensor

APA, Harvard, Vancouver, ISO, and other styles

47

Chan, S. H., and W. Zhang. "Rewetting Theory and the Dryout Heat Flux of Smooth and Grooved Plates With a Uniform Heating." Journal of Heat Transfer 116, no. 1 (1994): 173–79. http://dx.doi.org/10.1115/1.2910852.

Full text

Abstract:

The evaporation and condensation of thin liquid films are of significant importance in a wide variety of problems ranging from specific applications in the heat pipe field to more general ones in the chemical, nuclear, and petrochemical industries. Although several investigations have been conducted to determine the rewetting characteristics of liquid films on heated rods, tubes, and flat plates, no solutions are yet available to describe the rewetting process of a hot plate subjected to a uniform heating. A model is presented to analyze the rewetting process of such plates with and without gr

APA, Harvard, Vancouver, ISO, and other styles

48

Miao, Xin Lei. "Innovations of Hot-Forming for Cost-Efficient Lightweight Solution in Car Body." Advanced Materials Research 1063 (December 2014): 244–48. http://dx.doi.org/10.4028/www.scientific.net/amr.1063.244.

Full text

Abstract:

More applications of hot-forming for cost-efficient lightweight solution will be considered in new car body projects of China. As a partner for hot-forming, ThyssenKrupp Steel Europe sets a 3-pillar development strategy from material, process and advanced component design for this demand. The detailed technologies and innovations are introduced together with application examples, to show how to realize the lightweight result with cost-efficiency.

APA, Harvard, Vancouver, ISO, and other styles

49

Liu, Ya, Gaokai Zhang, Xupin Zhuang, et al. "Solution Blown Nylon 6 Nanofibrous Membrane as Scaffold for Nanofiltration." Polymers 11, no. 2 (2019): 364. http://dx.doi.org/10.3390/polym11020364.

Full text

Abstract:

In this work, a nylon 6 nanofibrous membrane was prepared via solution blowing technology and followed hot-press as scaffold for nanofiltration. The structure and properties of the hot-pressed nylon 6 nanofibrous membrane (HNM) were studied the effect of hot-pressing parameters and areal densities. Then an ultra-thin polyamide (PA) active layer was prepared by interfacial polymerization on HNM. The effects of nanofibrous scaffolds on the surface properties of ultra-thin nanofiltration membranes and their filtration performance were studied. Results showed that the nylon 6 nanofibers prepared a

APA, Harvard, Vancouver, ISO, and other styles

50

I Gede Yoga Baskara Wasita Pradnyan, I Nyoman Rai, I Gede Wijana, and Darda Efendi. "Effect of soaking solution type on seed viability and seedling growth of Bonita and Loblita cayenne (Capsicum frutescens l.)." Magna Scientia Advanced Biology and Pharmacy 11, no. 2 (2024): 097–104. http://dx.doi.org/10.30574/msabp.2024.11.2.0024.

Full text

Abstract:

The problem with the inhibition of the germination process of cayenne seeds is the presence of capsaicin substances contained in cayenne seeds that can inhibit the germination process. This research aims to get varieties that have better quality between Bonita and Loblita based on the interaction that occurs between varieties and types of cayenne seed soaking solutions. This study used a factorial Randomized Group Design with 2 factors and 3 replications. The first factor was cayenne pepper varieties (Bonita and Loblita) while the second factor was the type of soaking solution (PGPR, IAA, KNO3

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!