Log in

Relevant bibliographies by topics / Housing units; Energy use characteristics; Energy utilization / Journal articles

To see the other types of publications on this topic, follow the link: Housing units; Energy use characteristics; Energy utilization.

Journal articles on the topic 'Housing units; Energy use characteristics; Energy utilization'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Housing units; Energy use characteristics; Energy utilization.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Joseph, Samuel Enaburekhan. "AN ENERGY AUDIT OF PURPOSE-BUILT GOVERNMENT HOUSING UNITS IN NIGERIA." Continental J. Engineering Sciences 1 (July 22, 2007): 1–6. https://doi.org/10.5281/zenodo.833555.

Full text

Abstract:

The electricity use characteristics of 16 air conditioned houses each of 2 bedrooms flat government owned housing unit in Gusau, Nigeria were investigated. Monthly electricity consumption data were gathered and analysed to obtain a breakdown of the energy use. Results show an annual electricity consumption of 572933 kWh with energy use per unit gross floor area of 236.73 kWh/m<sup>2</sup>. The percentage consumption for the three major electricity end users, namely air conditioning, electrical appliances and lighting were 78%, 21%, and 1%, respectively. Suggestions made to reduce energy consum

APA, Harvard, Vancouver, ISO, and other styles

2

Liang, Yehong. "Application analysis of green building technology in rural housing." Applied and Computational Engineering 25, no. 1 (2023): 159–66. http://dx.doi.org/10.54254/2755-2721/25/20230753.

Full text

Abstract:

In the process of construction and use of traditional rural buildings in China, the phenomenon of environmental pollution and resource waste is very serious. The introduction and use of green buildings can make natural resources more widely and rationally utilized through scientific overall design. This paper mainly studies the application of green building in rural housing. Firstly, the characteristics of rural green building design are analysed from three aspects: water saving and water resource utilization, energy saving and renewable energy utilization, material saving and greenhouse gas e

APA, Harvard, Vancouver, ISO, and other styles

3

Putra, Duta Catur Pamungkas, Imani Rizkia Dawami, Muhammad Rofiul Haq, Achmad Daffa Danang Luthfiansyah, Alfan Mubarok, and Dafit Ari Prasetyo. "Konsep Rancang Bangun Smart Home Base Berbasis IOT untuk Skala Perumahan." Journal of Engineering Science and Technology 1, no. 2 (2023): 86–95. http://dx.doi.org/10.47134/jesty.v1i2.11.

Full text

Abstract:

World energy demand continues to increase by 45% until 2030 based on projections of the International Energy Agency (IEA) with an average increase of 1.6% per year. About 80% of these energy needs supplied by fossil fuels. This increase occurred due to population growth, industrialization, lifestyle changes, and the use of increasingly complex technology. The household sector is one of the sectors that require energy to meet daily needs. Researchers conducted a study of research results related to rooftop Solar Power Plants, the use of thermoelectric as a producer of electrical energy, and the

APA, Harvard, Vancouver, ISO, and other styles

4

Lee, Soo-Jin, You-Jeong Kim, Hye-Sun Jin, Sung-Im Kim, Soo-Yeon Ha, and Seung-Yeong Song. "Residential End-Use Energy Estimation Models in Korean Apartment Units through Multiple Regression Analysis." Energies 12, no. 12 (2019): 2327. http://dx.doi.org/10.3390/en12122327.

Full text

Abstract:

The aim of this study was to develop a mathematical regression model for predicting end-use energy consumption in the residential sector. To this end, housing characteristics were collected through a field survey and in-depth interviews with residents of 71 households (15 apartment complexes) in Seoul, South Korea, and annual data on end-use energy consumption were collected from measurement systems installed within each apartment unit. Based on the data collected, correlativity between the field-survey data and end-use energy consumption was analyzed, and effective independent variables from

APA, Harvard, Vancouver, ISO, and other styles

5

Senova, Andrea, Erika Skvarekova, Gabriel Wittenberger, and Jana Rybarova. "The Use of Geothermal Energy for Heating Buildings as an Option for Sustainable Urban Development in Slovakia." Processes 10, no. 2 (2022): 289. http://dx.doi.org/10.3390/pr10020289.

Full text

Abstract:

The use of geothermal energy (GE) and the green economy in the environment of Slovak municipalities and towns is significant, due to the reduction in the negative influences and impacts of human society’s constant consumer lifestyle. The authors highlight the use of modern scientific knowledge, practical experience, and ever-improving technologies in the field of renewable energy sources RES. The aim of this contribution is to draw attention to the under-utilization of GE’s potential in Slovakia. Given the country’s commitment to meeting emission limits under EU carbon neutrality agreements by

APA, Harvard, Vancouver, ISO, and other styles

6

Mrakin, A. N., O. V. Afanaseva, O. Yu Kuleshov, M. A. Ageev, and P. A. Batrakov. "COMPARATIVE ANALYSIS OF THERMOTECHNICAL CHARACTERISTICS COMBUSTION'S PRODUCTS OF NONPROJECT GASEOUS FUELS." DYNAMICS OF SYSTEMS, MECHANISMS AND MACHINES 10, no. 3 (2022): 55–60. http://dx.doi.org/10.25206/2310-9793-2022-10-3-55-60.

Full text

Abstract:

This paper presents the results of calculating the heat exchange intensity of combustion products of various nonproject gaseous fuels using hydrogen, methane-hydrogen mixture (MHM) and thermochemical conversion gases as examples. To identify the possibility of energy utilization of generated gases in standard boiler units, a comparison with the combustion products of natural gas is carried out here. It is determined that the use of hydrogen or methane-hydrogen mixture will require either changes in the heating surface at a constant capacity, or its reduction due to changes in the thermal absor

APA, Harvard, Vancouver, ISO, and other styles

7

Wang, Shouwen, Jiejia Zhang, and Zhaobin Zhu. "Wind-Thermal-Energy Storage System Optimization: Evidence from Simulations of the Economical Consumption of Wind Energy." Mathematical Problems in Engineering 2022 (November 7, 2022): 1–13. http://dx.doi.org/10.1155/2022/7949419.

Full text

Abstract:

To realize the economical consumption of wind energy (WE), an optimal dispatch strategy for wind-thermal-energy storage systems (WTESSs) is proposed. The scheduling model is divided into two stages. In the first stage, the strategy aims to shave peaks and fill valleys in the load curve using a time-of-use (TOU) electricity price and to reduce the variance of the net load and use the energy time-shift characteristics of energy storage systems (ESSs) to optimize their charging and discharging power. In the second stage, the strategy minimizes the cost of WTESSs, obtaining the output power of the

APA, Harvard, Vancouver, ISO, and other styles

8

Poonia, Surendra, and A K Singh. "Economic and Environmental Sustainability of Various Solar Thermal Devices." Annals of Arid Zone 63, no. 2 (2024): 9–19. http://dx.doi.org/10.56093/aaz.v63i2.147200.

Full text

Abstract:

The development of a region depends on energy utilization. The use of traditional energy sources, such as coal, oil, and natural gas cause pollution by releasing greenhouse gases into the atmosphere. To solve these environmental problems, it is important to switch to cleaner, more energy-efficient sources such as renewable energy (solar, wind, hydro, geothermal) and reduce electricity use. ICAR-CAZRI, Jodhpur has designed and constructed many new solar thermal and photovoltaic systems to provide green solutions to energy problems in arid regions. PVT (Photovoltaic-Thermal) with great potential

APA, Harvard, Vancouver, ISO, and other styles

9

Chwiałkowski, Cyprian, and Adam Zydroń. "Socio-Economic and Spatial Characteristics of Wielkopolski National Park: Application of the Hedonic Pricing Method." Sustainability 13, no. 9 (2021): 5001. http://dx.doi.org/10.3390/su13095001.

Full text

Abstract:

The study aimed to determine the influence of the proximity of Wielkopolski National Park (WNP) on the value of dwelling units in Mosina municipality. The research was conducted based on 1182 residential property transactions in the period from 2014 to 2018. The input data were subjected to spatial and statistical analysis. The main part of the analysis was performed with the use of the hedonic price method (HPM)—WLS (weighted least squares). The use of statistical tools made it possible to find undeniable evidence that the housing prices are positively related to the presence of Wielkopolski

APA, Harvard, Vancouver, ISO, and other styles

10

Tanzharikov, P. A., and S. R. Mukhtarov. "METHODS OF IMPROVING THE EFFICIENCY OF ENERGY SUPPLY TO OIL AND GAS ENTERPRISES." ТЕХНИКА ҒЫЛЫМДАРЫ ЖӘНЕ ТЕХНОЛОГИЯ 2 (2024): 30–38. http://dx.doi.org/10.52081/tst.2024.v02.i6.036.

Full text

Abstract:

Realization of high-tech designs in gas and oil industry contributes to more efficient functioning of production. Development of quality minerals is not a scientific and technical progress, but a stable level indicator based on the general economic aspect.Therefore, the introduction of high quality updated technologies and additions to production functioning systems always leads to a greater need for their use. To maximize energy efficiency in gas and oil production, it is recommended to use high-quality autonomous power sources. The sets of optimization possibilities on algorithms of systems

APA, Harvard, Vancouver, ISO, and other styles

11

Arbara, Sophia, and Roberto D’Autilia. "A Population Game Model for the Expansion of Airbnb in the City of Venice." Sustainability 13, no. 7 (2021): 3829. http://dx.doi.org/10.3390/su13073829.

Full text

Abstract:

The emergence of Airbnb along with an increase in urban tourism has intensified the pressure on urban areas while adding a new dimension to the dynamics of housing distribution, especially in historic cities. These dynamics affect local economies and significantly alter the characteristics of urban spaces, hence the necessity to not only create policies that foster sustainable tourism development but also to advance urban models that explore the relation between Airbnb and the traditional rental and accommodation sector. Through the case of Venice, the present study sheds light on the potentia

APA, Harvard, Vancouver, ISO, and other styles

12

Mukhtarov, S. R., and P. A. Tanzharykov. "Methods of increasing the efficiency of energy supply to oil and gas industry enterprises." Neft i Gaz, no. 4 (August 30, 2024): 92–101. http://dx.doi.org/10.37878/2708-0080/2024-4.07.

Full text

Abstract:

Realization of high-tech designs in gas and oil industry contributes to more efficient functioning of production. Development of quality minerals is not a scientific and technical progress, but a stable level indicator based on the general economic aspect.Therefore, the introduction of high quality updated technologies and additions to production functioning systems always leads to a greater need for their use. To maximize energy efficiency in gas and oil production, it is recommended to use high-quality autonomous power sources. The sets of optimization possibilities on algorithms of systems

APA, Harvard, Vancouver, ISO, and other styles

13

Chang, Bo. "Optimal Dispatch of Microgrids in Islanded and Grid-Connected Modes: A Mixed-Integer Linear Programming Approach for Cost Minimization and Renewable Energy Integration." Applied and Computational Engineering 169, no. 1 (2025): 189–201. https://doi.org/10.54254/2755-2721/2025.ch25313.

Full text

Abstract:

The depletion of traditional fossil fuel energy and the increasingly apparent environmental pollution issues have made the development of clean and environmentally friendly new energy sources the optimal solution to address these severe problems. The proposal and application of the microgrid concept provide a new option for integrating various renewable energy sources. Microgrids can not only improve the utilization rate of renewable energy but also enhance the reliability of renewable energy power supply, reduce the use of traditional fossil fuels, and lower pollutant emissions. However, high

APA, Harvard, Vancouver, ISO, and other styles

14

Donskoy, I. "The Influence of Fuel and Steam Consumption on Characteristics of Fixed Bed Process of Woody Biomass Steam Gasification with Intensive Heat Supply." Energy Systems Research, no. 4(12) (February 1, 2021): 13–22. http://dx.doi.org/10.38028/esr.2020.04.0002.

Full text

Abstract:

Plant biomass is one of the most widespread renewable energy sources. Energy utilization of biomass allows solving some problems associated with the development of off-grid energy systems and the processing of combustible waste (primarily agricultural and forestry waste). This paper is devoted to the study of an allothermal gasification process of plant biomass materials using a kinetic-thermodynamic model developed by the author. The gasification process is considered stationary, and steam is used as a gasification agent. The power of the supplied heat is considered constant (10 kW). One of t

APA, Harvard, Vancouver, ISO, and other styles

15

Riekstiņš, Roberts. "BUILDING ENERGY AND ARCHITECTURAL FORM RELATIONSHIPS / PASTATO ENERGIJOS IR ARCHITEKTŪRINĖS FORMOS RYŠIAI." Mokslas - Lietuvos ateitis 3, no. 3 (2011): 67–71. http://dx.doi.org/10.3846/mla.2011.053.

Full text

Abstract:

Energy efficiency of buildings, of course, is now a major issue in the construction industry. It is being widely examined both among construction professionals and amateurs. There is no doubt that energy efficiency as a key factor in ensuring environmental sustainability will become the main driving force of the construction in the future. Buildings have to become more energy-efficient. This opinion is supported by the existing energy-use balance in Europe, indicating that the housing sector spends almost half of total energy consumption and building sector forms more than a third of total CO2

APA, Harvard, Vancouver, ISO, and other styles

16

Shubenko, Oleksandr, Oleksandr Senetskyi, and Mikola Babak. "BINARY ELECTRICAL GENERATING INSTALLATION FOR UTILIZATION HEAT OF BOILER FLUE GASES." Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units, no. 1 (November 14, 2022): 15–24. http://dx.doi.org/10.20998/2411-3441.2022.1.03.

Full text

Abstract:

The work is devoted to the development of modern thermal schemes for the production of electrical energy while utilizing the heat of flue gases from boilers of power units. On the example of a typical district boiler house, the parameters and potential of heat discharged into the atmosphere with the flue gases of boilers are investigated, and it is determined that they are sufficient to generate electrical energy by implementing the so-called organic Rankine cycles. To utilize the heat of exhaust gases with a temperature of 280 °С at a flow rate of 10 kg/s, a three-loop power generating plant

APA, Harvard, Vancouver, ISO, and other styles

17

Tkachuk, Mykola, Gennadiy Lvov, Sergey Kravchenko, et al. "Substantiating promising technical solutions for turbo- expander power plants based on the research into working processes and states." Eastern-European Journal of Enterprise Technologies 4, no. 7 (124) (2023): 98–105. http://dx.doi.org/10.15587/1729-4061.2023.285865.

Full text

Abstract:

One of the most rational methods of energy utilization of compressed gas in pipelines is to use turbo-expander installations. In particular, these are autonomous turbo-expander power stations. A fundamentally new concept has been devised to improve the technical and economic performance of this type of machines. This concept is not focused on a separate aspect of the plant's operation but on their entire set. In particular, physical principles, structures, and technologies were considered as an object of research. First, effective parameters of gas-dynamic flows and heat-mass transfer were det

APA, Harvard, Vancouver, ISO, and other styles

18

Batessova, Firuza, Gulmira Sattarova, Rosa Omirbay, et al. "Impact noise reduction due to the use of steels with enhanced dissipative properties in the manufacture of mining equipment parts." Mining of Mineral Deposits 19, no. 2 (2025): 95–106. https://doi.org/10.33271/mining19.02.095.

Full text

Abstract:

Purpose. Research aims to study the influence of alloying elements on the properties of steels contributing to the increased sound energy dissipation and reduced acoustic emission in order to develop alloys for the manufacture of mining equipment parts operating in impact mode (drill string and drill bit housing. Methods. Six alloys were developed during the research based on standard steels. Samples were melted in LPZ-1-67 high-frequency induction furnace at a melting temperature of 1700°C. All the samples were made in the form of 50×50×5 mm plates. KazNTU-2017 setup was used to study the imp

APA, Harvard, Vancouver, ISO, and other styles

19

Savinkin, V. V., V. N. Kuznetsova, and A. S. Abilmazhinova. "Development of an Energy- Efficient Rotary Inertia Device for Briquetting Household Solid Waste (HSW)." World of Transport and Transportation 18, no. 1 (2020): 38–57. http://dx.doi.org/10.30932/1992-3252-2020-18-38-57.

Full text

Abstract:

Today, increasing volumes of household solid waste (HSW) pose a serious problem throughout the world. The solution to this problem is involvement of secondary raw materials and waste in production. The disposal of HSW includes laborious stages of its collection and transportation. Aggregates of the garbage truck work inefficiently, only pressing HSW into a shapeless mass, not subject to sorting and processing. The suggested re-equipment of a special vehicle with aggregates with the combined functions of «loading–forwarding–grinding–pressing– briquetting» will significantly reduce the energy co

APA, Harvard, Vancouver, ISO, and other styles

20

Rasakhodzhaev, B., S. Makhmudov, and F. Muminov. "Selection of a heating system based on climatic conditions of Uzbekistan and on calculations of the technical and economic indicators of alternative systems: A case study of the solar greenhouse with a transformable building." IOP Conference Series: Earth and Environmental Science 939, no. 1 (2021): 012003. http://dx.doi.org/10.1088/1755-1315/939/1/012003.

Full text

Abstract:

Abstract This paper presents studies on the choice of a heating system based on calculations of economic efficiency and payback periods for alternative systems, a solar greenhouse with a transformable body. The purpose of the work is to carry out calculations to determine the consumption of fuel resources necessary to ensure the required amount of energy for the heating season: consumption of natural gas, solid fuel (coal) and electricity for heating a greenhouse with a transformable (adjustable) body. Analytical methods were used to determine the cost of materials and the main units of a gree

APA, Harvard, Vancouver, ISO, and other styles

21

Cui, Jianpeng, Meihui Zhu, Linyuan Guo, Haili Zhang, Alice C. Hughes, and Huafeng Wang. "Urban Planning and Green Landscape Management Drive Plant Diversity in Five Tropical Cities in China." Sustainability 15, no. 15 (2023): 12045. http://dx.doi.org/10.3390/su151512045.

Full text

Abstract:

Green space is essential in urban areas to maintain, and improve human well-being. To better understand the impact of environmental and socioeconomic changes on the sustainability of tropical urban green space landscapes, work is needed to explore the patterns of plant diversity and its drivers in urban green spaces. We explore urban floristic diversity patterns based on samples from 826 urban functional units located in five cities in the tropical coastal region of China. Field surveys were conducted to obtain data on plant diversity, land use types, socioeconomic characteristics, and environ

APA, Harvard, Vancouver, ISO, and other styles

22

Ock, YunJae, Vivek Shandas, Fernanda Ribeiro, and Noah Young. "Drivers of Tree Canopy Loss in a Mid-Sized Growing City: Case Study in Portland, OR (USA)." Sustainability 16, no. 5 (2024): 1803. http://dx.doi.org/10.3390/su16051803.

Full text

Abstract:

The benefits of the urban tree and tree canopy (UTC) are increasingly crucial in addressing urban sustainability. Yet, increasingly evident from earlier research is the distributional inequities of UTC and active efforts to expand tree plantings. Less is known about the dynamics of UTC loss over time and location. This study aims to understand the dynamics of UTC change, especially canopy loss, and to investigate the drivers of the loss. This study draws on a high–resolution dataset of an urban canopy in Portland, Oregon, USA, assessing changes in UTC from 2014 to 2020. By integrating demograp

APA, Harvard, Vancouver, ISO, and other styles

23

Ropiudin, Ropiudin, and Kavadya Syska. "ANALISIS KUALITAS BIOBRIKET KARBONISASI TEMPURUNG KELAPA DAN KULIT SINGKONG DENGAN PEREKAT TEPUNG SINGKONG." Journal of Agricultural and Biosystem Engineering Research 3, no. 1 (2022): 19. http://dx.doi.org/10.20884/1.jaber.2022.3.1.6588.

Full text

Abstract:

One of the steps that can be taken to overcome fossil fuel sources is the use of renewable energy sources, especially renewable energy sources. The transfer of energy sources from fuel oil to renewable energy sources is expected to reduce the level of dependence on petroleum. Utilization of agricultural waste, plantation waste or industrial waste is an alternative fuel substitute by converting it into biobriquettes. Coconut shells and cassava peels are agricultural wastes that can be used as materials for making biobriquettes and their availability is quite abundant in Indonesia. This study ai

APA, Harvard, Vancouver, ISO, and other styles

24

Jin Geng. "Ecological Nature in Rural Architecture in Xi'an." Journal of Information Systems Engineering and Management 10, no. 38s (2025): 155–69. https://doi.org/10.52783/jisem.v10i38s.6836.

Full text

Abstract:

Exploring the ecological nature of rural architecture is significant for promoting sustainable development in rural areas. By studying the ecological nature of rural architecture, it can drive the development of rural buildings towards environmental protection, energy conservation, and resource recycling, reducing negative impacts on the environment and improving the quality of rural life. Taking Nandoujiao Village in Xi'an as an example, this article investigates the ecological nature of rural housing in Xi'an and its surrounding areas through field research, literature review, comparative an

APA, Harvard, Vancouver, ISO, and other styles

25

Wang, Baoshun, Yanfang Liu, Zhaomin Tong, Rui An, and Jiwei Xu. "Spatiotemporal Dynamic Characteristics of Land Use Intensity in Rapidly Urbanizing Areas from Urban Underground Space Perspectives." Sustainability 15, no. 17 (2023): 13008. http://dx.doi.org/10.3390/su151713008.

Full text

Abstract:

Land use intensity (LUI) reflects the utilization status of land use. However, traditional LUI assessments have been conducted for land space governance with a primary focus on surface land. Thus far, the explicit variation and spatiotemporal characteristics of land use of underground space (LUUS), particularly the quantization of LUUS-related intensity, are not well understood. Using the case of Wuhan in China, this study takes the main urban area of Wuhan as the research area, based on the time series data of the underground space information survey of analysis units from 2002 to 2018. This

APA, Harvard, Vancouver, ISO, and other styles

26

Sklyarenko, E. V., L. Y. Vorobiov, D. A. Kirzhner, and S. V. Plashykhin. "TECHNICAL ANALYSIS OF PRODUCTS OF USED TIRES THERMOCHEMICAL CONVERSION." Thermophysics and Thermal Power Engineering 41, no. 4 (2019): 57–64. http://dx.doi.org/10.31472/ttpe.4.2019.8.

Full text

Abstract:

Introduction. Utilization of worn tires in the world is of great economic and ecological importance for all developed countries. This is due to the fact that worn tires are a source of long-term pollution of the environment by toxic components and a causative agent of the sanitary-epidemiological situation in their places of storage. Today, the most common method for disposing of tires is to burn them to produce energy that requires special technologies and combustion plants and exhaust gas cleaning systems. In addition, the disadvantage of this method is the increased CO2 emissions.&#x0

APA, Harvard, Vancouver, ISO, and other styles

27

Benchaar, Chaouki, Fadi Hassanat, Karen A. Beauchemin, Daniel R. Ouellet, Hélène Lapierre, and Cristiano Côrtes. "Effect of Metabolizable Protein Supply on Milk Performance, Ruminal Fermentation, Apparent Total-Tract Digestibility, Energy and Nitrogen Utilization, and Enteric Methane Production of Ayrshire and Holstein Cows." Animals 13, no. 5 (2023): 832. http://dx.doi.org/10.3390/ani13050832.

Full text

Abstract:

In North America, the nutrient requirements of dairy cattle are predicted using the Cornell Net Carbohydrate and Protein System (CNCPS) or the National Research Council (NRC). As Holstein is the most predominant dairy cattle breed, these models were developed based on the phenotypic, physiological, and genetic characteristics of this breed. However, these models may not be appropriate to predict the nutrient requirements of other breeds, such as Ayrshire, that are phenotypically and genetically different from Holstein. The objective of this study was to evaluate the effects of increasing the m

APA, Harvard, Vancouver, ISO, and other styles

28

Kolesnichenko, N. V., S. M. Safiants, A. B. Biryukov, and O. V. Litvinov. "Research of functionality of using a storage tank for regulating heating load of a gas piston mini-CHPP." Vestnik IGEU, no. 1 (February 28, 2021): 21–30. http://dx.doi.org/10.17588/2072-2672.2021.1.021-030.

Full text

Abstract:

The use of a storage tank to regulate the loads of the mini-CHP plant improves the technical and economic indicators of its operation. However, the results of studies of the use of a storage tank in heating systems, in contrast to hot water supply systems, are poorly represented. The purpose of the study is to determine the conditions and indicators under which the use of a storage tank to regulate the heating load of a mini-CHPP is economically viable. The study of the heat grid is based on solving the standard heat balance and heat transfer equations. Modeling of heat transfer in the heat re

APA, Harvard, Vancouver, ISO, and other styles

29

KOSIYUK, Mykola. "COGENERATION DEVICE BASED ON INNOVATIVE TECHNOLOGY ORGANIZATION OF ORGANIC WASTE." Herald of Khmelnytskyi National University. Technical sciences 309, no. 3 (2022): 85–88. http://dx.doi.org/10.31891/2307-5732-2022-309-3-85-88.

Full text

Abstract:

This work considers the issue of creating efficient and environmentally friendly energy systems based on cogeneration technology. In industrialized countries, work is underway to develop and implement innovative technology for supercritical hydrothermal destruction of industrial and household waste and highly toxic substances. An extremely important urgent task is the complex solution of the problems of creating an autonomous energy complex based on the technology of cogeneration and utilization of organic waste and their use as renewable energy sources. Theoretical and experimental studies ha

APA, Harvard, Vancouver, ISO, and other styles

30

Pitak, Inna, Arunas Baltusnikas, Jurate Cesniene, and Gintaras Denafas. "Development of technological line for solid recovered fuel production and its utilization in the cement industry: the case study of Lithuania." Eastern-European Journal of Enterprise Technologies 1, no. 6(115) (2022): 53–63. http://dx.doi.org/10.15587/1729-4061.2022.251439.

Full text

Abstract:

This experimental research was purposed to investigate the production and energy potential of solid recovered fuel (SRF), obtained by extraction of prohibited materials, shredding and drying, from refuse-derived fuel (RDF) to use as an alternative fuel in the cement industry of Lithuania. The characteristics of the obtained RDF by separating the biological fraction from the mainstream of municipal solid waste (MSW) have been determined and compared with the criteria set by developing countries. According to EN15359, currently available RDF can't be called SRF and used as an alternative fuel in

APA, Harvard, Vancouver, ISO, and other styles

31

Inna, Pitak, Baltusnikas Arunas, Cesniene Jurate, and Denafas Gintaras. "Development of technological line for solid recovered fuel production and its utilization in the cement industry: the case study of Lithuania." Eastern-European Journal of Enterprise Technologies 1, no. 6 (115) (2022): 53–63. https://doi.org/10.15587/1729-4061.2022.251439.

Full text

Abstract:

This experimental research was purposed to investigate the production and energy potential of solid recovered fuel (SRF), obtained by extraction of prohibited materials, shredding and drying, from refuse-derived fuel (RDF) to use as an alternative fuel in the cement industry of Lithuania. The characteristics of the obtained RDF by separating the biological fraction from the mainstream of municipal solid waste (MSW) have been determined and compared with the criteria set by developing countries. According to EN15359, currently available RDF can't be called SRF and used as an alternative fue

APA, Harvard, Vancouver, ISO, and other styles

32

Shcherbyna, Valerii, and Denys Shvachko. "The effect of thermal insulation of the lining on the heat exchange of rotating apparatuses." Proceedings of the NTUU “Igor Sikorsky KPI”. Series: Chemical engineering, ecology and resource saving, no. 2 (June 30, 2022): 22–33. http://dx.doi.org/10.20535/2617-9741.2.2022.260342.

Full text

Abstract:

Rotary kilns are used in many industries to process bulk raw materials. In the building materials industry, rotary kilns are widely used for heat treatment. However, the fuel utilization factor in rotary kilns is extremely low. Thus, the bulk of cement clinker is fired in furnaces, the thermal efficiency of which does not exceed 55-60%. Therefore, the task of increasing the efficiency of such units is extremely relevant. In operating furnaces, heat losses to the environment only through the furnace body reach 20-25% of the total heat of combustion. In this case, one of the main factors determi

APA, Harvard, Vancouver, ISO, and other styles

33

El Aoufy, Khadija, Carolina Forciniti, Yari Longobucco, et al. "A Comparison among Score Systems for Discharging Patients from Recovery Rooms: A Narrative Review." Nursing Reports 14, no. 4 (2024): 2777–94. http://dx.doi.org/10.3390/nursrep14040205.

Full text

Abstract:

Introduction: The recovery room (RR) is a hospital area where patients are monitored in the early postoperative period before being transferred to the surgical ward or other specialized units. The utilization of scores in the RR context facilitates the assignment of patients to the appropriate ward and directs necessary monitoring. Some scoring systems allow nurses to select patients who can be discharged directly to their homes. Aim and methods: The aim of this narrative review was to describe and compare the scoring systems employed to discharge postoperative patients from RR, with a focus o

APA, Harvard, Vancouver, ISO, and other styles

34

Loureiro, Emannuel Sant'Thiago Pereira, Nelio Moura de Figueiredo, Lúcio Carlos Pinheiro Campos Filho, and Tainã Carvalho Garcia Miranda Filgueiras. "Analysis of relative efficiency of vessels of passenger transportation in the Brazilian Amazon: an AHP-DEA approach." Acta Scientiarum. Technology 45 (August 26, 2022): e58199. http://dx.doi.org/10.4025/actascitechnol.v45i1.58199.

Full text

Abstract:

Waterway transport is of great importance for the population of the Amazon Region. It is responsible for moving, according to Agência Nacional de Transportes Aquaviários (Antaq, 2018), approximately 9.8 million passengers and 3.4 million tons of cargo distributed by state, interstate longitudinal transport interstate and crossing. However, despite the great importance, there are several blockages related to the conditions of the roads and vessels in certain routes. The study in question proposes the use of a mathematical tool to analyze vessels from the relative efficiency involving parameters

APA, Harvard, Vancouver, ISO, and other styles

35

Lapshyn, Yevhen, Oleksandr Shevchenko, and Odiljon Khayitov. "Foreign experience of processing ash slag waste from thermal power plants." Geo-Technical Mechanics, no. 168 (2024): 105–20. https://doi.org/10.15407/geotm2024.168.105.

Full text

Abstract:

Ash slag waste is technogenic mineral formations that are produced in large quantities and represent a serious environmental hazard. On the other hand, it is a valuable mineral raw material for the production of various materials, housing, road, rural and industrial construction, and the mining industry. In accordance with the set goal, the foreign experience of processing ash waste from thermal power plants was studied. The impact of toxic substances contained in waste storage areas on the environment and the human body was studied. An analysis of the composition and characteristics of ash an

APA, Harvard, Vancouver, ISO, and other styles

36

Pryshliak, Natalia. "Evaluation of the efficiency of using individual biogas plants for processing biowaste of peasant farms." Ekonomika APK 317, no. 3 (2021): 50–60. http://dx.doi.org/10.32317/2221-1055.202103050.

Full text

Abstract:

The purpose of the article is to determine the prospects for the introduction of biogas technologies by households in Ukraine and the energy, economic and environmental benefits from their use. Research methods. Dialectical methods of cognition of processes and phenomena, analysis and synthesis were used - to study the current state of waste accumulation by households; empirical - for a comprehensive assessment of the current state of household provision; scientific abstraction - to summarize the results, form conclusions and determine the prospects for biogas production in peasant households

APA, Harvard, Vancouver, ISO, and other styles

37

Bekeev, A. Kh, A. Ya Aliev, and S. A. Aliev. "The power unit of universal tractors of traction class 1,4 with an integrated starter generator." Traktory i sel hozmashiny 84, no. 12 (2017): 8–13. http://dx.doi.org/10.17816/0321-4443-66357.

Full text

Abstract:

The technical development of tractor designs is characterized by an increase in the power of consumers, the use of electric drive units. The load on the electric system of a modern tractor is constantly growing and exposes the existing 12-volt systems to excessive loading. To date, with the relatively low efficiency of traditional generators it is impossible to meet the growing needs of tractors and its systems. The solution of the problem of increasing the power simultaneously with increasing the efficiency (up to 85...90 %) could become an integrated starter-generator. Possessing sufficient

APA, Harvard, Vancouver, ISO, and other styles

38

Latino, Francesca, and Francesco Tafuri. "Wearable Sensors and the Evaluation of Physiological Performance in Elite Field Hockey Players." Sports 12, no. 5 (2024): 124. http://dx.doi.org/10.3390/sports12050124.

Full text

Abstract:

Sports performance tracking has gained a lot of interest and widespread use in recent years, especially in elite and sub-elite sports. This makes it possible to improve the effectiveness of training, to calibrate and balance workloads according to real energy expenditure, and to reduce the likelihood of injuries due to excessive physical stress. In this context, the aim of this review was to map the scientific literature on wearable devices used in field hockey, evaluating their characteristics and the available evidence on their validity in measuring physiological and movement parameters. A s

APA, Harvard, Vancouver, ISO, and other styles

39

Zaitseva, O. O., S. V. Cherednychenko, Ye M. Hryshchenko, and O. I. Iatsiuta. "CONTROL OF METROLOGICAL CHARACTERISTICS OF HEAT METERS DURING OPERATION." Thermophysics and Thermal Power Engineering 44, no. 1 (2022): 92–96. http://dx.doi.org/10.31472/ttpe.1.2022.11.

Full text

Abstract:

Purpose The purpose of this article is to consider the features of calibration of single heat meters during operation. Results of operation Heat meters belong to the field of legally regulated metrology, as their measurement results are used in calculations between consumers and suppliers of heat for heating and hot water supply, so they are subject to periodic verification during operation and after repair. The so-called single heat meters have been widely used in the equipment of individual heat metering units for space heating. The peculiarity of single heat meters is that

APA, Harvard, Vancouver, ISO, and other styles

40

K., Snehal, Manimaran N., Debojyoti Basuroy, Soumen Maity, and Piyush Chaunsali. "Beneficial Utilization of Biomass Waste in Construction Material - Research Monograph." Research Data & Reports 1, no. 1 (2024): 1–68. https://doi.org/10.70002/iitm.rdr.1.1.18.

Full text

Abstract:

Bioenergy is one of the key sources of renewable energy production in India. The strength of India’s biomass sources rests primarily on its agricultural sector. An enormous quantity of crop residues is being generated on a seasonal basis in India. The gross and surplus biomass residues available in India per annum are estimated to be ~750 million tonnes (MT) and ~230 million tonnes (MT), respectively. The surplus crop residues are the sustainable feedstock for the production of bioenergy. In India, cereal crops (rice, wheat, etc.,) and sugarcane are found to have a significant potential to gen

APA, Harvard, Vancouver, ISO, and other styles

41

Nesmiyan, A. Yu, and Yu S. Tsench. "Tendencies and Prospects for the Development of Domestic Machinery for Sowing Grain Crops." Agricultural Machinery and Technologies 12, no. 3 (2018): 45–52. http://dx.doi.org/10.22314/2073-7599-2018-12-3-45-52.

Full text

Abstract:

The design of domestic grain drills largely determines the quality of sowing and the effectiveness of technologies for cultivating farm grain and seed crops in general. (Research purpose) To consider the development stages of domestic industrial production of grain drills and, in the form of an analytical review, to present the main information a chronological order. (Materials and Methods) the authors have conducted an expert analysis of the results of domestic scientists’ research on the effect of the surface distribution of seeds on the yield of grain crops and determined general trends in

APA, Harvard, Vancouver, ISO, and other styles

42

Kuznetsov, Valerii, та Anatolii Shevtsov. "Ефективність суднових енергетичних установок з теплообмінними апаратами з трубних пучків з лунковими системами". Aerospace Technic and Technology, № 4sup2 (24 серпня 2023): 19–27. http://dx.doi.org/10.32620/aktt.2023.4sup2.02.

Full text

Abstract:

The direction of increasing the efficiency of marine power plants by using heat exchange elements that implement intensive methods of heat transfer, which are characterized by a predominant increase in heat transfer over aerodynamic resistance, is considered. The research method is mathematical modeling of processes in power plants at the level of their individual elements – heat engine, power, and technological heat exchangers. The adequacy of the mathematical model for research the efficiency of power plants is justified by the results of verification and validation by comparing the results

APA, Harvard, Vancouver, ISO, and other styles

43

Kalinchyk, M. V., I. M. Alekseenko, S. M. Kalinchyk, V. I. Dushka, I. Y. Semchuk, and Y. R. Kosovych. "Methodology for calculating feeding rate for farrowing sows and physical standards at first insemination." Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies 27, no. 102 (2025): 175–83. https://doi.org/10.32718/nvlvet-a10226.

Full text

Abstract:

Agricultural production in Ukraine, especially livestock products, does not fully meet the needs of the population and industry for raw materials. This is not only an important state-economic problem, but also a socio-political task, the solution of which is aimed at providing the population with stable food supplies. Creating a meat balance in the country primarily depends on increasing the production of all types of meat, including pork. And this is not only because pig farming is one of the early-maturing branches of livestock farming with a high fertility rate of sows, but also because the

APA, Harvard, Vancouver, ISO, and other styles

44

Ozhulas, V. A., A. V. Petrishhev, and A. G. Fishov. "Using a simulator of Minigrid modes to solve design problems." Power engineering: research, equipment, technology 26, no. 3 (2024): 66–82. http://dx.doi.org/10.30724/1998-9903-2024-26-3-66-82.

Full text

Abstract:

RELEVANCE: The main directions of modern energy development include the use of distributed small-scale generation and various facilities based on them with integration into existing distribution electric networks of centralized power supply, as well as the digitalization of such facilities and technologies for their design, personnel training.THE PURPOSE: The possibility and effectiveness of using the Minigrid mode and control simulator (a simulator for learning mode management and training operational personnel) as a means of solving a number of design tasks when creating small-scale generati

APA, Harvard, Vancouver, ISO, and other styles

45

Chen, Min, Hao Yang, Bo Mao, Kaiwen Xie, Chaoping Chen, and Yuanchang Dong. "An Ensemble Forecast Wind Field Correction Model with Multiple Factors and Spatio-Temporal Features." Atmosphere 14, no. 11 (2023): 1650. http://dx.doi.org/10.3390/atmos14111650.

Full text

Abstract:

Accurate wind speed prediction is significantly important for the full utilization of wind energy resources and the improvement in the economic benefits of wind farms. Because the ensemble forecast takes into account the uncertainty of information about the atmospheric motion, domestic and foreign weather service forecast centers often choose to use the ensemble numerical forecast to achieve the fine forecast of wind speed. However, due to the unavoidable systematic errors of the ensemble numerical forecast model, it is necessary to correct the deviation in the ensemble numerical forecast wind

APA, Harvard, Vancouver, ISO, and other styles

46

Dionne, Antoine, Firoz Miyanji, Jennifer A. Dermott, et al. "Canadian Spine SocietyCPSS-01. Abstract ID 48. Is long-term follow-up required for low-grade spondylolisthesis? A prospective study of 247 children followed until skeletal maturityCPSS-02. Abstract ID 101. Major complications following anterior vertebral body tethering surgeryCPSS-03. Abstract ID 164. Late referral of adolescent idiopathic scoliosis: the impact of socioeconomic status and health care utilizationCPSS-04. Abstract ID 97. The impact of curve correction on patient satisfaction — Is straighter better?CPSS-05. Abstract ID 22. Assessing Cobb angle agreement in community spine radiographs: clinical significance in adolescent idiopathic scoliosis patientsCPSS-06. Abstract ID 35. Enhanced Recovery After Surgery does not affect incidence of chronic postsurgical pain and improves postoperative outcomes after pediatric spine surgeryCPSS-07. Abstract ID 102. Predicting overcorrection in anterior vertebral body tethering: Can we improve patient selection?CPSS-08. Abstract ID 66. New artificial intelligence–driven surface topography phone app helps screen patients with spinal deformity: early results from one institutionCPSS-09. Abstract ID 96. Postoperative suicide risk is elevated in patients undergoing posterior spinal instrumentation and fusionCPSS-10. Abstract ID 53. Characterizing antibiotic prophylaxis practices in pediatric deformity spinal surgery and impact on 30-day postoperative infection: an NSQIP pediatric database studyA-11. Abstract ID 16. Preoperative opioid use affects self-reported pain scores in elderly patients undergoing multilevel spinal surgery for adult spinal deformityA-12. Abstract ID 41. The impact of a perioperative Enhanced Recovery After Surgery program on outcomes in adult cervical deformity patientsA-13. Abstract ID 112. A prospective, observational, multicentre study assessing functional improvements after multilevel fusion for adult spinal deformity: 5-year follow-up resultsA-14. Abstract ID 19. Outcomes of preemptive spinal cord stimulation for patients with pain from structural spine deformitiesA-15. Abstract ID 60. T1 pelvic and lumbar pelvic angles normative values: a prospective cohort study of 496 asymptomatic volunteersA-16. Abstract ID 128. How reliable are intraoperative neuromonitoring alerts during non-cord–level spinal deformity surgery? Results from the Spinal Deformity Intraoperative Monitoring studyA-17. Abstract ID 99. Using artificial intelligence to predict postoperative satisfaction for scoliosis patients: a retrospective database studyA-18. Abstract ID 70. A comparison of surgical outcome and equitable access for hip, knee and lumbar spine surgery for end-stage osteoarthritisA-19. Abstract ID 109. What are the predictive factors for compensatory supra-adjacent level lordosis angle changes after lumbar interbody fusion for degenerative spine disease?A-20. Abstract ID 115. Are nonsteroidal anti-inflammatory drugs appropriate for patients recovering from lumbar fusion surgery for elective spine procedures? A systematic review and meta-analysisB-21. Abstract ID 57. The role of bedrest after incidental durotomy in lumbar spineB-22. Abstract ID 44. Decompression versus decompression and fusion and the influence of the lordosis distribution index in the outcome of patients with degenerative lumbar spondylolisthesisB-23. Abstract ID 103. Clinical outcomes after indirect decompression through anterior approaches versus direct decompression with posterior approaches in lumbar interbody fusion — a propensity-matched analysis using data from the Canadian Spine Outcomes and Research NetworkB-24. Abstract ID 141. Candidate epigenetic polygenic risk score to predict pain response following surgical intervention for lumbar spinal stenosis due to spine osteoarthritisB-25. Abstract ID 94. Comparative analysis of characteristics and clinical outcomes of discectomy without fusion between upper and lower lumbar disc herniations: a Canadian Spine Outcomes Research Network (CSORN) studyB-26. Abstract ID 63. Improvement in multifidus muscle quality following a 12-week exercise program in patients with chronic low back pain: a randomized controlled trialB-27. Abstract ID 121. Predictive factors for distal adjacent segment disease in short lumbar fusions ending at L5B-28. Abstract ID 75. Impact of 1- or 2-level minimally invasive surgery versus open lumbar interbody fusion on postoperative opioid useB-29. Abstract ID 127. Revision lumbar fusions exhibit worse clinical outcomes when compared with primary fusions: a matched cohort analysis using the Canadian Spine Outcomes and Research Network RegistryB-30. Abstract ID 74. Outcome prediction following lumbar disc surgery (Opti-Disc): a longitudinal study of outcome trajectories, prognostic factors and risk modelsC-31. Abstract ID 56. Mild degenerative cervical myelopathy — patients at risk of conservative treatment failureC-32. Abstract ID 61. Automated magnetic resonance imaging risk stratification of clinical deterioration in mild cervical myelopathyC-33. Abstract ID 7. The effects of perioperative adverse events on clinical and patient-reported outcomes after surgery for degenerative cervical myelopathy: an observational cohort study from the Canadian Spine Outcomes and Research NetworkC-34. Abstract ID 11. Anterior versus posterior surgery for patients with degenerative cervical myelopathy: an observational study from the Canadian Spine Outcomes and Research NetworkC-35. Abstract ID 20. Long-term (> 24 months) duration of symptoms negatively impacts patient-reported outcomes following anterior cervical discectomy and fusion for cervical radiculopathyC-36. Abstract ID 24. Predictors associated with achieving the minimal clinically important difference in patient-reported outcomes after surgery for degenerative cervical myelopathy: a national multi-centre cohort analysis from the Canadian Spine Outcomes and Research NetworkC-37. Abstract ID 155. A data-driven classification of degenerative cervical myelopathy leads to clinically relevant subgroups with distinct preoperative features and postsurgical outcomes: a CSORN studyC-38. Abstract ID 148. Clinical outcomes of surgical treatment of degenerative cervical myelopathy: a long-term follow up studyC-39. Abstract ID 137. Fulfillment of patient expectations after surgery for degenerative cervical myelopathy. A retrospective analysis of prospectively collected data from the multicentre Canadian Surgical Spine Registry (CSORN)C-40. Abstract ID 28. Re-analysis of the CSM-Protect multicentre randomized controlled trial reveals a global treatment benefit of riluzole in patients undergoing surgery for degenerative cervical myelopathyD-41. Abstract ID 33. The growing problem of spine surgery wait times in British Columbia: longitudinal trends and impacts on perioperative outcomesD-42. Abstract ID 119. Patient expectations and surgical satisfaction in primary versus revision lumbar spine surgeryD-43. Abstract ID 105. Impact of surgical wait time on prescription opioid utilization in patients having surgery for degenerative spinal conditionsD-44. Abstract ID 108. Emergency department “bounce backs” after posterior decompression surgeryD-45. Abstract ID 21. Can patients with cerebrospinal fluid leak be discharged home on the same day after tubular microdiscectomy: retrospective cohort analysisD-46. Abstract ID 42. Efficacy of virtual triage in patients with low back painD-47. Abstract ID 54. Wait times and health resource utilization by patients awaiting spine assessment and surgery in ManitobaD-48. Abstract ID 165. Characteristics of attrition of patients enrolled in the Canadian Spine Outcomes and Research Network registry and prospective studies for degenerative spine surgeryD-49. Abstract ID 67. Waiting for spine surgery in Canada: an evaluation of wait times, wait lists and surgeries performed before and after the onset of the COVID-19 pandemicD-50. Abstract ID 88. Words that lead to the operating room: identifying terminology patterns in referral letters for lower back pain and their association with surgery using Natural Language ProcessingE-51. Abstract ID 38. Quantifying the association between surgical spine approach and tracheostomy timing after traumatic cervical spinal cord injuryE-52. Abstract ID 25. Withdrawal of life-supporting treatment in spinal cord injury: a large multicentre observational cohort studyE-53. Abstract ID 34. Comparative analysis of spinal cord–derived endogenous stem cells and induced pluripotent stem cells for spinal cord injury treatmentE-54. Abstract ID 65. Specialized care is associated with reduced risk for unplanned readmissions following traumatic incomplete spinal cord injuryE-55. Abstract ID 113. The association between mean arterial blood pressure augmentation and intraparenchymal hemorrhage after acute spinal cord injuryE-56. Abstract ID 27. Impact of traumatic cervical spinal cord injury on income and employment status in a Canadian cohortE-57. Abstract ID 37. Circuit interrogation of whole brain reveals a novel neuromodulatory target to improve locomotion after traumatic spinal cord injuryE-58. Abstract ID 118. Prediction of 5-year mortality following spinal cord injury using a frailty index as a measure of deficitsE-59. Abstract ID 125. Health economic analysis of neurologically intact thoracolumbar A3 and A4 fractures is dominant in supporting surgery over nonsurgical treatmentE-60. Abstract ID 49. Safety and feasibility of early activity-based therapy following traumatic spinal cord injury: final results from the PROMPT-SCI trialE-61. Abstract ID 107. Identification of proteins in the blood serum related to neurological recovery after traumatic spinal cord injuryE-62. Abstract ID 18. Critical appraisal of frailty and sarcopenia tools in spinal oncologyE-63. Abstract ID 100. Early neurological recovery following surgical treatment of spinal cord injuries due to spinal tumours. A retrospective cohort study of 113 patientsE-64. Abstract ID 139. Cervical spine chordomas: surgical outcome assessment in a multicentre cohort from the Primary Tumor Research and Outcomes Network (PTRON)E-65. Abstract ID 83. The effect of hemodynamic management and venous thromboembolism prophylaxis on intraparenchymal hemorrhage progression in a porcine model of traumatic spinal cord injuryP-100. Abstract ID 92. Economic comparisons of endoscopic spine surgery: a systematic reviewP-101. Abstract ID 120. Prospective Prophylactic Antibiotics Regimen in Scheduled Spine Surgery — the PPARiSSS Cohort. An independently verified and validated cohort study of extended antibiotic prophylaxis combined with standardized tissue handling and perioperative wound care in 1000 scheduled lumbar pedicle-screw implant surgeriesP-102. Abstract ID 130. The impact of concurrent deformity on patient-reported outcomes following 1- to 3-level lumbar surgery not aimed at deformity correctionP-103. Abstract ID 136. Describing available preoperative education methods and comparing outcomes for spinal fusion candidates: a cross-Canada studyP-104. Abstract ID 144. Matched-cohort investigation comparing minimally invasive and traditional open lumbar decompression and interbody fusion: a Canadian Spine Outcomes and Research Network (CSORN) studyP-105. Abstract ID 146. Measuring differences between interlamellar properties of the annulus fibrosus from degenerative disc disease and nondiseased young donor patientsP-106. Abstract ID 147. Assessing collagen damage in annulus fibrosus from patients with degenerative disc disease using a collagen hybridizing peptideP-107. Abstract ID 150. The effects of using antidepressants for presurgical pain management on postsurgical pain and disability outcomes in patients with lumbar spinal stenosisP-108. Abstract ID 163. Pseudarthrosis of the lumbar spine: a systematic reviewP-109. Abstract ID 8. What is the diagnostic accuracy of community spine x-rays for adolescent idiopathic scoliosis brace candidates?P-110. Abstract ID 14. A comparative study of protocols for spinal casting in severe early-onset scoliosis: a 4-year progression-free survival analysisP-111. Abstract ID 36. Aquatic therapy for chronic low back pain: preliminary insights into muscle strength and psychological outcomesP-112. Abstract ID 51. The true cost of late referral in adolescent idiopathic scoliosis: a 5-year follow-up and cost analysis studyP-113. Abstract ID 52. The effect of transcutaneous electrotherapies on self-reported outcomes in patients with chronic low back pain: a systematic review and meta-analysisP-114. Abstract ID 84. The immediate effect of a single treatment of neuromuscular electrical stimulation with the StimaWELL 120MTRS system on multifidus stiffness in patients with chronic low back painP-115. Abstract ID 23. Contemporary trends in the incidence and timing of spinal metastases: a population-based retrospective cohort studyP-116. Abstract ID 39. Automated psoas muscle segmentation: radiomic features and surgical fitness in spinal metastatic lung cancerP-117. Abstract ID 76. What is the optimal management of patients with metastatic spine disease with intermediate spinal instability neoplastic scores: To operate or not to operate?P-118. Abstract ID 80. Does the number of spinal metastases affect the survival of patients with lung cancer?P-119. Abstract ID 110. Which patients have the best chances of improving their neurological status after pathologic spine fractures presenting with neurologic compromise?P-120. Abstract ID 116. Could patients’ neurological status deteriorate after posterior decompression and fusion for unstable vertebral pathologic fractures?P-122. Abstract ID 50. Challenging decision-making in spinal firearm and stab injuries: case series from a Brazilian trauma centreP-123. Abstract ID 55. Trends and impact of pharmacological venous thromboembolism prophylaxis timing for complete traumatic cervical spinal cord injury across North American trauma centres from 2013 to 2020P-124. Abstract ID 58. Standardizing a magnetic resonance imaging library of acute traumatic spinal cord injury in CanadaP-126. Abstract ID 69. Is the level of consent to a national research registry associated with patient outcomes following traumatic spinal cord injury? A population-based study from the Rick Hansen Spinal Cord Injury Registry (RHSCIR)P-127. Abstract ID 78. Spinal cord injuries secondary to mountain biking accidents — a cause for national alarmP-128. Abstract ID 85. Can the Montreal Acute Classification of Spinal Cord Injury (MAC-SCI) be used to detect early perioperative deteriorations following traumatic spinal cord injury? A validation studyP-129. Abstract ID 87. Building of a national Canadian magnetic resonance imaging repository for deep-learning segmentation of edema and hemorrhageP-132. Abstract ID 134. Functional and patient-reported outcomes following peripheral nerve transfers to improve upper limb function in individuals with cervical spinal cord injuryP-133. Abstract ID 135. Assessing the efficacy of a novel multidisciplinary outpatient program for improving upper limb function in cervical spinal cord injuryP-134. Abstract ID 153. Assessing neural stem progenitor cell proliferation: identifying effective predictorsP-136. Abstract ID 159. Identifying care pathways of patients with traumatic spinal cord injury using novel AI methodsP-137. Abstract ID 160. Ski- and snowboard-related spinal trauma and spinal cord injury: a northeastern level 1 trauma experienceP-138. Abstract ID 161. Robot-assisted needle injection for biomaterial delivery in treating spinal cord injuryP-141. Abstract ID 5. Impact of tobacco on nonunion rate and patient-reported outcomes in spinal fusion surgery: a systematic review and meta-analysisP-142. Abstract ID 6. The economic burden of diabetes in spinal fusion surgery: a systematic review and meta-analysisP-144. Abstract ID 47. Integration of a self-evaluation tool into surgical case logs for tracking spine fellow progressP-145. Abstract ID 64. Ligament damage models in the lumbar spine: modelling using a novel 3D-printable analogue modelP-146. Abstract ID 68. Interactions between mechanical and immune modulation of human mesenchymal stem cells on micronanotextured Ti-6Al-4V surfacesP-147. Abstract ID 72. Implementation of workshops in regional British Columbia to enhance clinician confidence in spinal cord injury care provisionP-148. Abstract ID 77. Altering physician referral practices is challenging, but not impossible: Spine Assessment Clinic quality-improvement studyP-149. Abstract ID 81. Feasibility and outcomes of minimally invasive tubular spinal cord stimulation lead placement: a retrospective case series studyP-150. Abstract ID 90. Thermal optimization of robotic piezoelectric osteotomy motion for the purpose of pedicle screw pilot hole preparationP-151. Abstract ID 98. The need for neuromonitoring during growing rod surgical distractions in early-onset scoliosisP-152. Abstract ID 106. Case report: L1 compression fracture in a patient with multilevel lumbar retrosomatic cleft and pedicular dysplasiaP-153. Abstract ID 111. Development of improved patient educational material for elective spine surgery: a patient-engagement initiativeP-154. Abstract ID 114. The natural history of spinal cord cavernous malformation: a systematic review and meta-analysisP-155. Abstract ID 124. The influence of obesity on spinal nonunion: a systematic review and meta-analysisP-156. Abstract ID 126. Meta-analysis of the effects of diabetes mellitus on fusion rates and patient-related outcomes in spinal fusion surgeryP-158. Abstract ID 91. Cost savings analysis through a direct-to-hospital sales model for interbody cagesP-159. Abstract ID 158. A survey comparing postsurgical opioid prescribing practices of neurosurgeons around the world following lumbar discectomies and craniotomiesP-160. Abstract ID 45. Performance comparison between Hounsfield units and dual-energy x-ray absorptiometry in predicting lumbar interbody cage subsidence after circumferential lumbar fusionP-67. Abstract ID 73. Can classical machine-learning models predict long-term degenerative cervical myelopathy outcomes?P-68. Abstract ID 131. The relative importance of cervical myelopathy treatment outcomes to spine surgeons and family physicians in Canada: a discrete-choice experimentP-69. Abstract ID 133. Effect of elective cervical spine surgery on mental health of patients with degenerative cervical myelopathy: a CSORN studyP-70. Abstract ID 143. Using smartphones for clinical assessment in cervical spondylotic myelopathy: a small cohort studyP-71. Abstract ID 151. Cervicothoracic construct fixation comparison using finiteelement analysisP-72. Abstract ID 152. Posterior cord syndrome: a possible indication for clinical failure in anterior cervical discectomy and fusion for cervical spondylotic myelopathy, and denial of equipoiseP-74. Abstract ID 17. One-third of adult surgical patients with spinal deformity are consuming opioids both pre- and postoperatively, with significant international differences: this is partly a cultural issueP-75. Abstract ID 32. Baseline blood pressure influences frequency of neuro-monitoring alerts during posterior fusion for adolescent idiopathic scoliosisP-77. Abstract ID 59. Effects of teriparatide on complications, surgical outcomes and health-related quality of life in osteoporotic patients undergoing correction of adult spinal deformityP-78. Abstract ID 71. Postoperative day 1 discharge for patients undergoing vertebral body tethering; optimization of a rapid discharge protocolP-79. Abstract ID 79. Characterization of spinopelvic parameters in children under 10 years of age with spondylolisthesis and analysis of progressionP-80. Abstract ID 86. A shifting female-to-male ratio of individuals requiring surgery for adolescent idiopathic scoliosis: a 15-year edit prospective observational studyP-81. Abstract ID 93. Clinical and radiological outcomes of gradual reduction and circumferential fusion of high-grade spondylolisthesis in adolescents. A prospective cohort study of 29 young patientsP-82. Abstract ID 104. Interrater reliability of partially automated segmentation of spinal radiographs in patients with adult spinal deformity using KeOps softwareP-83. Abstract ID 117. Recovery patterns and de novo neurological deficits associated with intraoperative neuromonitoring alerts in cord-level severe spinal deformity surgeries: results from an international multicentre prospective Spinal Deformity Intraoperative Monitoring (SDIM) studyP-84. Abstract ID 122. An evaluation of postsurgical pain management: oral-only morphine versus combined oral and intravenous patient-controlled analgesia in patients with scoliosisP-85. Abstract ID 129. Saving spinal cord function by using intraoperative monitoring and rapid response during spinal deformity surgeryP-87. Abstract ID 145. Structure–function relationships of degenerative and degenerative scoliosis annulus fibrosus — a possible etiological factor in adult deformitiesP-89. Abstract ID 154. The dreaded false negatives: when intraoperative neuromonitoring fails to detect spinal cord and nerve root deficits associated with complex spinal deformity correction — a prospective international study from the AO Spine Knowledge Forum DeformityP-90. Abstract ID 162. What events are associated with intraoperative neuromonitoring alerts in deformity surgeries? Results from the multicentre prospective Spinal Deformity Intraoperative Monitoring (SDIM) studyP-92. Abstract ID 15. Meta-analysis of randomized controlled trials comparing radiation exposure in robot-guided versus freehand spinal fusionP-93. Abstract ID 26. The effects of dynamic pedicle-based stabilization on adjacent segment degeneration: retrospective study at 6-year follow-upP-95. Abstract ID 30. Relationship between paraspinal muscle cross-sectional area, fatty infiltration and muscle strength in patients with chronic low back painP-97. Abstract ID 46. The role of single-photon emission computed tomography with computed tomography in improving pain outcomes following spine interventions: a systematic reviewP-98. Abstract ID 82. Development and validation of a magnetic resonance imaging–based scoring system for lumbar spine assessment: a proposal for convolutional neural network integration for future clinical automationP-99. Abstract ID 89. From text to meaning to surgery: predicting surgical decisions from semantic analysis of referral communications for lower back pain." Canadian Journal of Surgery 67, no. 6suppl1 (2024): S17—S76. http://dx.doi.org/10.1503/cjs.011424.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Silva, Cassio, Edson Farias Mello, Gilberto Dias Calaes, Patricia Duringer Jacques, and André Luiz Invernizzi. "Contribution of the Geodiversity knowledge to social, economic, and environmental health development." Journal of the Geological Survey of Brazil 8, no. 1 (2025). https://doi.org/10.29396/jgsb.2025.v8.n1.2.

Full text

Abstract:

With the support of this study, based on published information, this article highlights that Geosciences enable the research of methods and perspectives aimed at optimizing the management of natural resource use, aligning them with ecological limitations and incorporating environmental and social variables into the territorial planning process. Geoscientific information, knowledge, and learning establish a foundation for the supply of essential resources and provide technical and scientific support across various sectors and topics of societal interest. These include mining, where knowledge an

APA, Harvard, Vancouver, ISO, and other styles

48

Shubayr, N. "Factors Influencing Radiologic Technologists’ Commitment to Radiation Protective Equipment Utilization in Fluoroscopy Units: An Analysis Using the Health Belief Model Scale." Radioprotection, December 15, 2023. http://dx.doi.org/10.1051/radiopro/2023046.

Full text

Abstract:

Objective: This study aimed to assess the perceptions of radiologic technologists towards the use of radiation protective equipment (RPE) in fluoroscopy units and to identify the Health Belief Model constructs, “perceived susceptibility, perceived severity, perceived benefits, perceived barriers, cues to action, and self-efficacy”, that predict RPE utilization among radiologic technologists. Methods: A cross-sectional observational study was conducted among 228 radiologic technologists in Saudi Arabia. Data were collected using a self-administered questionnaire that included socio-demogr

APA, Harvard, Vancouver, ISO, and other styles

49

Meza Terbullino, Giancarlo Fernando. "Eficiencia de los microorganismos en la estabilización de lodos sépticos en en el distrito Huando 2021." Boletín de Malariología y Salud Ambiental, April 30, 2023, 558–64. http://dx.doi.org/10.52808/bmsa.8e7.632.027.

Full text

Abstract:

The unprecedented growth of urban populations has placed enormous pressure on the quality of life with regard to housing, water and energy supply, and this is reflected in the deterioration of the quality of water, air and soil. A decrease in environmental quality due to the generation of waste in these urban centers, especially wastewater, is an important and growing concern. For this, improvement processes for these effluents have been proposed and one of them is the use of efficient microorganisms (EM), in the understanding that bacterial metabolism determines the effectiveness of biologica

APA, Harvard, Vancouver, ISO, and other styles

50

Wilaha, Lidi. "KARAKTERISTIK MEKANIK KOMPOSIT SERAT CANTULA (AGAVE CANTULA ROXB) SEBAGAI ALTERNATIF BAHAN PENGUAT TERHADAP PARTISI RUMAH." JURNAL TEKNOLOGI TECHNOSCIENTIA, February 1, 2019, 202–7. https://doi.org/10.34151/technoscientia.v11i2.1265.

Full text

Abstract:

Using of natural fiber as ingredients of particle board products, still have to various studies to gain the character of the product’s standard. Study of Cantula fiber utilization with matrix of Yukalac 157 BQTN-EX unsaturated polyester as the design of composite manufacturing partition (simplicity wall) of housing is professionally researched and potential, it's important to do immediately investigation potential of characteristic Cantula’s fiber as alternative composite material to partition housing. Cantula fiber that has been cleaned, then soaked with a solution of NaOH 10% for 4 hours, th

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!