Log in

Relevant bibliographies by topics / HSLA (High Strength Low Alloy)

Contents

Journal articles

Academic literature on the topic 'HSLA (High Strength Low Alloy)'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'HSLA (High Strength Low Alloy).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "HSLA (High Strength Low Alloy)"

1

Johnson, N., and P. Sanders. "High Strength Low Alloy (HSLA) Aluminum." International Journal of Metalcasting 6, no. 1 (2012): 61–62. http://dx.doi.org/10.1007/bf03355480.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Montemarano, T. W., B. P. Sack, J. P. Gudas, M. G. Vassilaros, and H. H. Vanderveldt. "High Strength Low Alloy Steels in Naval Construction." Journal of Ship Production 2, no. 03 (1986): 145–62. http://dx.doi.org/10.5957/jsp.1986.2.3.145.

Full text

Abstract:

The Naval Sea Systems Command has recently certified a lower-cost alternative steel to the HY-80 steel presently used in construction of naval surface ships. This alternative steel is based on the commercial development of high strength low alloy (HSLA) steels originally directed to the offshore oil exploration platform and gas line transmission industries. The certification is a result of an ongoing research and development program begun in 1980. This paper addresses several aspects of the HSLA steel development effort, including a discussion of the properties and metallurgy of this steel, an

APA, Harvard, Vancouver, ISO, and other styles

3

Li, Ning, Wilasinee Kingkam, Zi Ming Bao, et al. "Effect of Alloying Elements on Mechanical Properties of High-Strength Low-Alloy Steel." Materials Science Forum 1007 (August 2020): 41–46. http://dx.doi.org/10.4028/www.scientific.net/msf.1007.41.

Full text

Abstract:

In this study, the two types of high-strength low-alloy steels were melted and cast in a vacuum induction furnace. Phase transition temperature of HSLA steel was calculated by JMatPro software. The calculation results show that the two different types of HSLA steels which have equal phase proportions of ferrite and austenite at a temperature of approximately 820 and 800 °C in HSLA-I and HSLA-II, respectively. In addition, the effect of chemical composition on the microstructure and mechanical properties of steels were studied. The results indicate that the ultimate tensile stress value of HSLA

APA, Harvard, Vancouver, ISO, and other styles

4

Timokhina, Ilana B., Peter D. Hodgson, Simon P. Ringer, Rong Kun Zheng, and Elena V. Pereloma. "Characterization of Nano-Scale Particles in Hot-Rolled, High Strength Low Alloy Steels (HSLA)." Materials Science Forum 561-565 (October 2007): 2083–86. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.2083.

Full text

Abstract:

The contribution of nano-scale particles observed using Atom Probe Tomography in an increase of yield strength of conventional and advanced HSLA steels was studied. The advanced HSLA steel showed higher yield strength than conventional HSLA steel. There were two types of carbides, which primarily contribute to an increase in yield strength of conventional HSLA steel: (i) coarse TiC with average size of 25±5nm and (ii) fine TiC with average radius of 3±1.2nm. The presence of two types of carbides was found in the microstructure of advanced HSLA steel: (i) nano-scale Ti0.98Mo0.02C0.6 carbides wi

APA, Harvard, Vancouver, ISO, and other styles

5

Wold, Espen. "High strength low alloy (HSLA) cold forming steels." Materials & Design 11, no. 5 (1990): 243–46. http://dx.doi.org/10.1016/0261-3069(90)90206-y.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, Chun Guo, Stefan van der Vyver, and Xiao Zhi Hu. "Fatigue Behavior of Weld-Repaired High Strength Low Alloy Steel." Advanced Materials Research 275 (July 2011): 39–42. http://dx.doi.org/10.4028/www.scientific.net/amr.275.39.

Full text

Abstract:

Fatigue crack growth properties of Bisplate 80, a high strength low alloy (HSLA) steel, with extensive weld repair have been studied. Fatigue cracking becomes relevant if extensive abrasive wear damage is repaired through welding because of the change in material properties. In this study, extended compact tension (E-CT) specimens of Bisplate 80 with and without weld repair, and with and without a buffer layer between the weld and parent material are used to evaluate the fatigue crack growth behaviour. Fatigue crack growth rates are closely monitored at the interface regions between the weld,

APA, Harvard, Vancouver, ISO, and other styles

7

Speer, J. G., and S. S. Hansen. "As-Rolled High-Strength Plate Grades for Navy Shipbuilding Applications." Journal of Ship Production 5, no. 03 (1989): 200–205. http://dx.doi.org/10.5957/jsp.1989.5.3.200.

Full text

Abstract:

As-rolled high-strength, low-alloy (HSLA) steel plates offer a number of benefits compared with heat-treated plates, and this paper discusses laboratory and production experiments which have been conducted to develop as-rolled grades for high-strength Navy shipbuilding applications (for example, HSLA-65 and HSLA-80). A low-carbon niobium/vanadium microalloyed steel is shown to offer favorable combinations of strength, toughness, and weldability. The results indicate that an as-rolled grade which meets the current HSLA-80 strength and impact requirements can be produced in thicknesses up to app

APA, Harvard, Vancouver, ISO, and other styles

8

Zhang, Chun Guo, Peng Min Lu, and Jun Hong Li. "Effect of Buffer Layer Thickness on Fatigue and Residual Stress of Welded High-Strength Low-Alloy." Advanced Materials Research 820 (September 2013): 110–13. http://dx.doi.org/10.4028/www.scientific.net/amr.820.110.

Full text

Abstract:

The present work dealt with the fatigue and residual stress (RS) effects of a soft buffer layer (BL) between the parent metal and the weld metal (WM) on welded high-strength low-alloy (HSLA) steel. Six strategies were pursued by varying BL thickness and changing U-notch position with respect to the WM in extended-compact tension specimen. The U-notch position was changed to study the effect of welding RS field, acting along the fatigue crack growth path. The welded HSLAs with BLs strategies were compared to the specimens without BLs strategies, before and after releasing RS respectively. The r

APA, Harvard, Vancouver, ISO, and other styles

9

Yan, Wei, Yang Zhang, Weiqing Chen, and Jing Li. "Freckle formation and prevention in high strength low alloy steel ingots." Metallurgical Research & Technology 117, no. 3 (2020): 309. http://dx.doi.org/10.1051/metal/2020030.

Full text

Abstract:

Freckles considerably limit the development of larger electro-slag remelting (ESR) ingots. To simulate the freckling conditions in ESR ingots, high-strength low alloy (HSLA) steel was solidified with varying solidification front angles. Note that the freckling potential is enhanced and the orientation of freckle channel tends to be in the vertical direction with increase in solidification front angle. This is because the tilted solidification front contributes the available buoyancy and transports light (Si, Mn, Cr)-enriched liquid flows upwards toward the mush zone and then accumulates in the

APA, Harvard, Vancouver, ISO, and other styles

10

Cao, Xin Jin, Priti Wanjara, A. Bernard, Dominik Pudo, Cameron Munro, and Allison E. Nolting. "Hybrid Fiber Laser – Arc Welding of High Strength Low Alloy Steel." Materials Science Forum 783-786 (May 2014): 663–68. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.663.

Full text

Abstract:

High strength low alloy (HSLA) grade 80 (HSLA-80) steel with a thickness of 9.1-mm was successfully welded in a single pass using a 5-kW fiber laser combined with an arc welding process. It was found that the maximum gap size in the Y-groove butt joint configuration should remain below 0.2 mm for a 9.1-mm section thickness. Sound butt joints with no welding cracks but some minor microporosity were successfully obtained. However, an underfill defect was frequently observed on the top surface of the weldments. Underfilling could be mitigated through increasing the filler wire addition so as to e

APA, Harvard, Vancouver, ISO, and other styles

More sources

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!