Log in

Relevant bibliographies by topics / HSM / Journal articles

To see the other types of publications on this topic, follow the link: HSM.

Journal articles on the topic 'HSM'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'HSM.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Gondim, Luciana Tavares, and Matias Carvalho Aguiar Melo. "SAD-HSM." Diálogos Interdisciplinares em Psiquiatria e Saúde Mental 2, no. 2 (2023): e10354. http://dx.doi.org/10.59487/2965-1956-2-10354.

Full text

Abstract:

Objetivo: Caracterizar o serviço de atenção domiciliar, assim como o perfil clínico e demográfico dos pacientes assistidos, em funcionamento há 10 anos no Hospital de Saúde Mental Professor Frota Pinto (HSMPFP) do Estado do Ceará. Metodologia: Trata-se de uma pesquisa descritiva, de abordagem quantitativa, com base em indicadores alimentados no período de 2018 a 2022. Resultado: A equipe do SAD-HSM é composta por 5 membros, que realizam suas funções uma vez por semana. O serviço não dispõe de prontuário eletrônico, telefone e carro próprio, limitando sua atuação. O projeto terapêutico singular

APA, Harvard, Vancouver, ISO, and other styles

2

Rădulescu, Bruno, and Mara-Cristina Rădulescu. "Human Experience in HSM Versus AI in HSM." Bulletin of the Polytechnic Institute of Iași. Machine constructions Section 69, no. 3 (2023): 99–108. http://dx.doi.org/10.2478/bipcm-2023-0027.

Full text

Abstract:

Abstract High-Speed Machining (HSM) involves the use of advanced machining techniques to cut materials at significantly higher speeds than traditional methods. The comparison between human-operated machining and AI-driven machining can be analyzed in various aspects like we present in the paper below.

APA, Harvard, Vancouver, ISO, and other styles

3

Aspinwall, D. K., R. C. Dewes, J. M. Burrows, M. A. Paul, and B. J. Davies. "Hybrid High Speed Machining (HSM): System Design and Experimental Results for Grinding/HSM and EDM/HSM." CIRP Annals 50, no. 1 (2001): 145–48. http://dx.doi.org/10.1016/s0007-8506(07)62091-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lega, Federico. "HSM Editorial (May 2019)." Health Services Management Research 32, no. 2 (2019): 57. http://dx.doi.org/10.1177/0951484819848910.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Fox, Dirk. "Hardware Security Module (HSM)." Datenschutz und Datensicherheit - DuD 33, no. 9 (2009): 564. http://dx.doi.org/10.1007/s11623-009-0145-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Liu, Li Juan, and Wen Ge Wu. "The HSM Cutters Management System Based on B/S." Advanced Materials Research 97-101 (March 2010): 3604–8. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3604.

Full text

Abstract:

As one of the advanced manufacturing technologies, high speed machining (HSM) is expected to be the inevitable trend of manufacturing industries. In our country, the relevant research on HSM starts later, the actual machining and experiment on the machining technology and the machining parameters of HSM are few, the reasonable machining parameters selection scheme and the appropriate cutter choice method are lack. In response, we established the HSM cutters management system based on B/S. The system can facilitate optimized HSM cutters management and improve cutting efficiency by analyzing the

APA, Harvard, Vancouver, ISO, and other styles

7

Vallejo, Antonio Jr, and Ruben Morales-Menendez. "Decision Control System for HSM*." IFAC Proceedings Volumes 41, no. 3 (2008): 70–74. http://dx.doi.org/10.3182/20081205-2-cl-4009.00014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

CUFADAR, Y., R. GÖÇMEN, G. KANBUR, and SS PARLAT. "Effect of hempseed meal on performance, egg quality and egg yolk fatty acids content in laying quails." Journal of the Hellenic Veterinary Medical Society 72, no. 4 (2022): 3427. http://dx.doi.org/10.12681/jhvms.29388.

Full text

Abstract:

In this study, the laying performance, external egg quality, egg yolk colour and fatty acids profile of quails (Coturnix coturnix japonica) fed on diets containing hemp seed meal (HSM) were determined. During 8 weeks trial, a total of 150, 10-weeks-old laying quails were used. Five diets were formulated to contain HSM at the level of 0 (control),5, 10, 15, and 20% that represented as 0 HSM, 5 HSM, 10 HSM, 15 HSM and 20 HSM, respectively.The performance parameters were not significantly (P>0.05)influenced by the dietary HSM contents. Eggshell ratio, eggshell breaking strength, egg shape inde

APA, Harvard, Vancouver, ISO, and other styles

9

Agasa Ramu, Mahesh, Somashekhar Metri, Trupti A Hunnura, Koushallya Patil, and Hanamant B Sannakki. "Investigation of molecular design, synthesis, and biological assessment of new benzopyran derivatives." Journal of Applied Pharmaceutical Research 13, no. 1 (2025): 86–94. https://doi.org/10.69857/joapr.v13i1.722.

Full text

Abstract:

Background: Tuberculosis (TB) remains a global health challenge, necessitating the discovery of novel anti-tubercular agents. The N-(8-hydrazinyl-3,4-dihydro-2H-1-benzopyran-6-yl)-N'-phenyl urea (HSM-II) scaffold has shown potential in developing effective drug candidates. Objective: This study aimed to design and evaluate 50 derivatives of HSM-II for their anti-tubercular activity, focusing on compounds demonstrating strong interactions with the protein PKS13 (PDB ID: 5v3y). Methods: A series of derivatives was synthesized, starting with the reaction of 8-bromo-3,4-dihydro-2H-1-benzopyran-6-a

APA, Harvard, Vancouver, ISO, and other styles

10

Chandrashekharaiah S. B. "High-speed machining (HSM): Challenges, advancements and industrial applications." World Journal of Advanced Research and Reviews 1, no. 2 (2019): 101–7. https://doi.org/10.30574/wjarr.2019.1.2.0126.

Full text

Abstract:

High-Speed Machining (HSM) has emerged as a transformative technology in modern manufacturing, offering significant improvements in productivity, precision, and cost efficiency. By operating at elevated cutting speeds and feed rates, HSM enables higher material removal rates, superior surface finish, and reduced machining time. This advancement has been particularly beneficial in industries such as aerospace, automotive, and die/mold manufacturing, where precision and efficiency are critical. Despite its advantages, the adoption of HSM presents several challenges, including accelerated tool we

APA, Harvard, Vancouver, ISO, and other styles

11

Ding, Song Lin, John Mo, and D. Yang. "HSM Strategies of CAD/CAM Systems — Part II Industrial Application." Key Engineering Materials 426-427 (January 2010): 559–63. http://dx.doi.org/10.4028/www.scientific.net/kem.426-427.559.

Full text

Abstract:

Over one hundred types of commercial CAD/CAM systems are currently used in various industries. To meet the increasing demand for high speed machining (HSM) from shop floors most of these systems have integrated functions for the generation of HSM tool path. However, the strategies they adopted and the qualities of HSM tool path generated by these packages differ significantly from system to system. This paper reviews the state-of-the-art HSM strategies adopted by industrial CAD/CAM systems. The review is based on sixteen widely used software packages which include both advanced systems and the

APA, Harvard, Vancouver, ISO, and other styles

12

Ding, Song Lin, John Mo, and D. Yang. "HSM Strategies of CAD/CAM Systems — Part I Tool Path Generation." Key Engineering Materials 426-427 (January 2010): 520–24. http://dx.doi.org/10.4028/www.scientific.net/kem.426-427.520.

Full text

Abstract:

Owning to the ultra high feed rate and spindle speed, tool path patterns which are less important in conventional metal cutting processes becomes critical in High Speed Machining (HSM). Without an appropriate tool path strategy HSM can not be fully implemented even though the CNC machine has HSM potentials. In practice attentions are usually drawn to advanced hardware components; tool path pattern catering to HSM is often overlooked. This paper introduces the principles of tool path generation for HSM. Essential properties of HSM and its technical requirements on the CAD/CAM system are summari

APA, Harvard, Vancouver, ISO, and other styles

13

Liu, Li Juan, Ming Lv, and Wen Ge Wu. "The HSM Intelligent Database System Based on Neural Networks." Advanced Materials Research 201-203 (February 2011): 162–66. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.162.

Full text

Abstract:

High speed cutting (HSM) is one of the main trends of cutting machinery. In our country, the relevant research of HSM starts later, the actual machining and experiment on the machining technology and the machining parameters of HSM are few, the reasonable machining parameters selection scheme and the appropriate cutter choice method are lack. The paper established the HSM cutters management system based on BP artificial neural networks to facilitate optimized database system and to improve cutting efficiency. The result shows the system is very helpful to select cutting parameters and the valu

APA, Harvard, Vancouver, ISO, and other styles

14

Wang, Su Yu, Wen Chao Wang, Tao Yu, and Bin Jiang. "Prediction of the Surface Roughness in High-Speed Machining Based on Molecular-Mechanical Theory of Friction." Advanced Materials Research 308-310 (August 2011): 1134–38. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.1134.

Full text

Abstract:

Surface roughness is an important parameter to evaluate the quality of high-speed machining (HSM). This paper establishes a mechanical model based on the molecular-mechanical theory of friction to study factors that influence the surface roughness in HSM. The relationship between flow stress and the remnant height on the machined surface is obtained. The HSM process of AISI-1045 steel is simulated by using finite element method (FEM) based on DEFORM-2D and the flow stress is obtained. The surface roughness of workpiece machined by HSM is calculated based on the value of flow stress and the mec

APA, Harvard, Vancouver, ISO, and other styles

15

Georgantzas, Nicholas C. "Humanizing HSM to benefit human systems." Human Systems Management 37, no. 1 (2018): 1–5. http://dx.doi.org/10.3233/hsm-18283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Oohashi, Yasuharu. "Operating Experience of TWIN-HSM Coater." JAPAN TAPPI JOURNAL 56, no. 1 (2002): 86–90. http://dx.doi.org/10.2524/jtappij.56.86.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Nathe, T., J. Galea, I. Peru, and C. Celum. "CONDOM USE BETWEEN HSM IN PERU." Journal of Investigative Medicine 52 (January 2004): S140. http://dx.doi.org/10.1097/00042871-200401001-00346.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Nathe, T., J. Galea, I. Peru, and C. Celum. "Condom Use between Hsm in Peru." Journal of Investigative Medicine 52, no. 1_suppl_part_2 (2001): 140. http://dx.doi.org/10.1177/108155890105201s346.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Estep, Patrick N., Emily G. Bonts, Bethany L. Shivers, et al. "Mass Properties Comparison of Dismounted and Ground-Mounted Head-Supported Mass Configurations to Existing Performance and Acute Injury Risk Guidelines." Military Medicine 184, Supplement_1 (2019): 245–50. http://dx.doi.org/10.1093/milmed/usy342.

Full text

Abstract:

Abstract In order to limit the aviator’s exposure to potentially unsafe helmet configurations, the U.S. Army Aeromedical Research Laboratory (USAARL) developed the USAARL Head-supported mass (HSM) Performance Curve and Acute Injury Risk Curve as guidelines for Army aviation HSM. These Curves remain the only established guidelines for Army HSM, but have limited applicability outside of the aviation environment. Helmet developers and program managers have requested guidelines be developed for the dismounted, ground-mounted, and airborne operating environments that consider currently fielded and

APA, Harvard, Vancouver, ISO, and other styles

20

Lind, Liza, Marie Studahl, Linn Persson Berg, and Kristina Eriksson. "CXCL11 production in cerebrospinal fluid distinguishes herpes simplex meningitis from herpes simplex encephalitis." Journal of Immunology 198, no. 1_Supplement (2017): 158.17. http://dx.doi.org/10.4049/jimmunol.198.supp.158.17.

Full text

Abstract:

Abstract The closely related herpes simplex viruses 1 and 2 can cause inflammations of the central nervous system (CNS), where type 1 most often manifest as encephalitis (HSE), and type 2 as meningitis (HSM). HSE is associated with severe neurological complications, while HSM is benign in adults. We proposed that the chemokine and cytokine production in cerebrospinal fluid (CSF) and serum could indicate why two closely related viruses exhibit different severity of their accompanied CNS inflammation. Secretion patterns of 30 chemokines and 10 cytokines in CSF of adult patients with acute HSE an

APA, Harvard, Vancouver, ISO, and other styles

21

Yue, Huimin, Yarong Zhao, Haining Wang, et al. "Anti-fibrosis effect for Hirsutella sinensis mycelium based on inhibition of mTOR p70S6K phosphorylation." Innate Immunity 23, no. 7 (2017): 615–24. http://dx.doi.org/10.1177/1753425917726361.

Full text

Abstract:

Hirsutella sinensis, cultured in vitro, is an attractive substitute for Cordyceps sinensis as health supplement. The aim of this study was to demonstrate whether H. sinensis mycelium (HSM) attenuates murine pulmonary fibrosis induced by bleomycin and to explore the underlying molecular mechanisms. Using lung fibrosis modle induced by intratracheal instillation of bleomycin (BLM; 4 mg/kg), we observed that the administration of HSM reduced HYP, TGF-β1 and the production of several pro-fibrosis cytokines (α-smooth muscle actin, fibronectin and vimentin) in fibrotic mice lung sections. Histopatho

APA, Harvard, Vancouver, ISO, and other styles

22

Guo, Zhong Feng, Jun Hong Hu, and Xue Yan Sun. "Study on Control Strategy of Shape Set up System for HSM." Applied Mechanics and Materials 236-237 (November 2012): 247–50. http://dx.doi.org/10.4028/www.scientific.net/amm.236-237.247.

Full text

Abstract:

Shape Set Up (SSU) system is the key technology for Hot Strip Mill (HSM). Precise SSU system is applied to improve the strip quality for HSM. The function of SSU, Setup and Feedback, is introduced. The main mathematic model of strip profile is set up. SSU system strategy is studied of a certain domestic 1700mm HSM. The SSU system is carried out in produce and the measurement data show that strip flatness deviant and strip profile deviant could be controlled in target scope. The study has set a sound base to improve the setting accuracy and develop SSU system for HSM further.

APA, Harvard, Vancouver, ISO, and other styles

23

Bhandula, Pankaj. "Strengthening Key Management Systems with Dedicated HSM Solution." International Journal of Science and Research (IJSR) 14, no. 3 (2025): 92–94. https://doi.org/10.21275/sr25302142114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Zorn, Virginia E., Terry D. Brandebourg, Mary K. Mullenix, et al. "Influence of Hempseed Meal on Fresh Goat Meat Characteristics Stored in Vacuum Packaging." Animals 13, no. 16 (2023): 2628. http://dx.doi.org/10.3390/ani13162628.

Full text

Abstract:

The objective of this study was to determine the influence of hempseed meal (HSM) on goat meat characteristics. Goats (N = 10/treatment) were allocated to a diet concentration (0, 10, 20, or 30%) of HSM, fed for 60 days, and harvested. Carcass measurements were collected after chilling, and subsequently fabricated into wholesale subprimals. From the subprimals of the shoulder and leg, steaks were cut 2.54 cm thick, vacuum packaged, and assigned to laboratory methods: cook yield, instrumental color, lipid oxidation, microbial spoilage, and instrumental tenderness. HSM did not alter (p > 0.05

APA, Harvard, Vancouver, ISO, and other styles

25

Qi, B. Y., Ning He, and Liang Li. "Experimental Study in HSM of Hardened Steel AISI D2." Advanced Materials Research 69-70 (May 2009): 374–78. http://dx.doi.org/10.4028/www.scientific.net/amr.69-70.374.

Full text

Abstract:

Hardened steel is widely used for good mechanical property, but its machinability is bad comparatively. It is efficient to enhance metal removed rate when high speed milling (HSM) hardened steel, but tool wear is rapid. In this paper, high-speed milling experiments were carried out for hardened steel with TiAlN coated tools. The effects of milling parameters on tool wear and surface roughness were studied. The influences of different coolants, such as dry, MQL, cryogenic MQL conditions on HSM hardened steel, were compared with each other, results showed that cryogenic MQL HSM hardened steel ha

APA, Harvard, Vancouver, ISO, and other styles

26

Liu, Xiaolong Sean. "Machine Learning Models for Hematogone Enumeration and Differentiation between Hematogones and Leukemic-Blasts in B-Acute Lymphoblastic Leukemias." Blood 142, Supplement 1 (2023): 7159. http://dx.doi.org/10.1182/blood-2023-172956.

Full text

Abstract:

Background: Hematogone (htg) counts are usually low in bone marrows but often increase in reactive or neoplastic conditions. When increased, htgs resemble leukemic-blasts in B-lymphoblastic leukemias (B-ALL) phenotypically. The differentiation between htgs and leukemic-blasts is critical as hematogone counts in marrows with reactive conditions may increase around or beyond B-ALL leukemic-blast diagnostic level and, conversely, leukemic-blast counts may be low in some B-ALL marrow samples. Additionally, current hematogone enumeration by the gating approach is operator dependent. Objective: To e

APA, Harvard, Vancouver, ISO, and other styles

27

Andriyanto, Wawan, and Ahmad Muzaki. "DIFERENSIASI ORGAN PENCERNAAN LARVA KERAPU BEBEK TURUNAN KE-3 (F-3) DAN BEBERAPA AKTIVITAS ENZIM YANG TERKAIT." Jurnal Riset Akuakultur 8, no. 1 (2013): 51. http://dx.doi.org/10.15578/jra.8.1.2013.51-63.

Full text

Abstract:

Pengamatan perkembangan diferensiasi saluran pencernaan larva ikan kerapu bebek F-3 hasil pembenihan induk generasi F-2 telah dilakukan melalui serangkaian pemeliharaan dari umur satu hari setelah menetas (HSM) sampai dengan 40 HSM. Sampel larva diambil setiap hari dari 1 HSM sampai dengan 10 HSM dan dilanjutkan interval tiga hari sampai umur 40 hari. Pakan alami diberikan sesuai dengan standar operasional prosedur (SOP) perbenihan kerapu namun tidak diberikan pengkayaan apapun dalam pakan alaminya. Sampel dianalisis secara histologi dengan staining menggunakan HE dan dianalisis pula aktivitas

APA, Harvard, Vancouver, ISO, and other styles

28

Bhutto, A. H., S. Zardari, G. S. Bhurgri, M. A. Zardari, R. Bhanbhro, and B. A. Memon. "Post Construction and Long Term Settlement of an Embankment Dam Computed with Two Constitutive Models." Engineering, Technology & Applied Science Research 9, no. 5 (2019): 4750–54. http://dx.doi.org/10.48084/etasr.3070.

Full text

Abstract:

For the settlement computation of an embankment dam, the soil stiffness is of great importance. Unfortunately, due to the lack of funds allocated for geotechnical investigation, stiffness parameters are commonly not evaluated as compared to strength properties. As a result, this may create hindrance in the use of advanced constitutive models such as Hardening Soil Model (HSM). In this study, the settlement with respect to depth and long term settlement of an embankment dam computed with Mohr-Coulomb Model (MCM) is compared with that of HSM applied to foundation soil only with limited data on s

APA, Harvard, Vancouver, ISO, and other styles

29

Bhutto, Amjad Hussain, Shahnawaz Zardari, Ghulam Shabir Bhurgri, Muhammad Auchar Zardari, Riaz Bhanbhro, and Bashir Ahmed Memon. "Post Construction and Long Term Settlement of an Embankment Dam Computed with Two Constitutive Models." Engineering, Technology & Applied Science Research 9, no. 5 (2019): 4750–54. https://doi.org/10.5281/zenodo.3510278.

Full text

Abstract:

For the settlement computation of an embankment dam, the soil stiffness is of great importance. Unfortunately, due to the lack of funds allocated for geotechnical investigation, stiffness parameters are commonly not evaluated as compared to strength properties. As a result, this may create hindrance in the use of advanced constitutive models such as Hardening Soil Model (HSM). In this study, the settlement with respect to depth and long term settlement of an embankment dam computed with Mohr-Coulomb Model (MCM) is compared with that of HSM applied to foundation soil only with limited data on s

APA, Harvard, Vancouver, ISO, and other styles

30

He, Qingming, Wen Yin, Zhouyu Liu, Tiejun Zu, Liangzhi Cao, and Hongchun Wu. "METHODS FOR CALCULATION OF SELF-SHIELDED CROSS SECTIONS OF FULLY CERAMIC MICRO-ENCAPSULATED FUEL DOUBLE HETEROGENEOUS SYSTEM." EPJ Web of Conferences 247 (2021): 03012. http://dx.doi.org/10.1051/epjconf/202124703012.

Full text

Abstract:

Fully ceramic micro-encapsulated (FCM) fuel is a kind of fuel that employs tri-structural isotropic (TRISO) particles to enhance safety. The FCM fuel assembly is a double heterogeneous system. The conventional self-shielding calculation methods cannot treat the DH effect. In this paper, three methods based on equivalent homogenization of the TRISO particle and the matrix are studied and compared: the hyper-fine energy group cross sections (XSs) homogenization based hyper-fine energy group method (HHM), the hyper-fine energy group XSs homogenization based subgroup method (HSM) and the subgroup

APA, Harvard, Vancouver, ISO, and other styles

31

Jacobson, Kristen June, Lea Ann Kinman, Walter Franklin Owsley, James Pierre Muir, and William Brandon Smith. "Nutritive Value Variation and In Vitro Digestibility of Hempseed Meal." Animals 11, no. 12 (2021): 3481. http://dx.doi.org/10.3390/ani11123481.

Full text

Abstract:

Hempseed meal (HSM) is left after oil extraction of hemp and may act as a protein source in livestock. The first phase of this research evaluated variation in nutritive value and in vitro dry matter digestibility (IVDMD) of HSM from various sources in North America; the second phase utilized IVDMD to evaluate the efficacy of hempseed meal as an ingredient in ruminant feed. In phase one, the source had no contribution to variance for neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL), or crude protein (CP) (p ≥ 0.20). However, batch within source contributed

APA, Harvard, Vancouver, ISO, and other styles

32

Springer, Ryon W., Teighlor D. Cross, Ashley C. Mason, et al. "PSIII-12 Palatability of Hempseed Meal Pellets Compared to Mainstream Feedstuffs in Horses." Journal of Animal Science 100, Supplement_3 (2022): 245–46. http://dx.doi.org/10.1093/jas/skac247.443.

Full text

Abstract:

Abstract When the 2014 and 2018 US Farm Bills legalized hemp (Cannabis sativa L.), increased farming created an abundance of hemp by-products. Hempseed meal (HSM) is a by-product of hempseed oil extraction. With increasing availability, hemp must be evaluated as a potential feedstuff for sustainable livestock systems. The objective of this study was to evaluate the palatability of HSM as an equine feedstuff. The study used a modified 3x3 Latin Square design utilizing 3 mature geldings (G; 7.3 ± 2.5 yr) and 3 mature mares (M; 12.5 ± 6.5 yr) blocked by sex. Basal feed consumption and bucket pref

APA, Harvard, Vancouver, ISO, and other styles

33

Lu, Wei, Chenbing Ni, Youqiang Wang, Chengguo Zong, Dejian Liu, and Xingbao Huang. "Surface Integrity and Machining Mechanism of Al 7050 Induced by Multi-Physical Field Coupling in High-Speed Machining." Lubricants 13, no. 2 (2025): 47. https://doi.org/10.3390/lubricants13020047.

Full text

Abstract:

Improving the surface quality and controlling the microstructure evolution of difficult-to-cut materials are always challenges in high-speed machining (HSM). In this paper, surface topography, defects and roughness are assessed to characterize the surface features of 7050 aluminum alloy (Al 7050) under HSM conditions characterized by high temperature, strain and strain rate. Based on multi-physical field coupling, the mechanism of microstructure evolution of Al 7050 is investigated in HSM. The results indicate that the surface morphology and roughness of Al7050 during HSM are optimal at fz = 0

APA, Harvard, Vancouver, ISO, and other styles

34

Gu, Yang Mo, Sunghyun Kim, Daekyung Sung, Byoung-In Sang, and Jin Hyung Lee. "Feasibility of Continuous Pretreatment of Corn Stover: A Comparison of Three Commercially Available Continuous Pulverizing Devices." Energies 12, no. 8 (2019): 1422. http://dx.doi.org/10.3390/en12081422.

Full text

Abstract:

We determined the potential of three mechanical pulverizers—a continuous ball mill (CBM), an air classifier mill (ACM), and a high-speed mill (HSM)—in the continuous pretreatment of corn stover. The mean diameters of the pulverized biomasses were not significantly different in the three cases, and the glucose yields from the CBM-, ACM-, and HSM-pulverized samples were 29%, 49%, and 44%, respectively. The energy requirements and process capacities for the ACM and HSM were similar. We conclude that the ACM and HSM could be used in the continuous pretreatment of corn stover and would be useful in

APA, Harvard, Vancouver, ISO, and other styles

35

Springer, Ryon W., Teighlor D. Cross, Paxton L. Turner, et al. "217 Acceptability of Hempseed Meal in Horses." Journal of Animal Science 100, Supplement_3 (2022): 96. http://dx.doi.org/10.1093/jas/skac247.187.

Full text

Abstract:

Abstract Congress passed US Farm Bills legalizing hemp (Cannabis sativa L.), after which hemp-farming increased, resulting in an abundance of hemp by-products, like hempseed meal (HSM). As such, HSM must be evaluated as a potential animal feedstuff. A study was designed to evaluate the acceptability of HSM over time in horses, using 6 stock-type geldings (11.5 ± 3.4yr, 539.6 ± 31.9kg, BCS 6). Horses were offered 1 kg of HSM pellets over two 5-min periods, 1 h apart each day, and offered 1 kg of Coastal Bermudagrass (Cynodon dactylon) hay between offerings. Horses remained on a commercial ratio

APA, Harvard, Vancouver, ISO, and other styles

36

Gyönyörű, Attila. "HSM szerszámpályák programozásának speciális vonásai, fejlesztési lehetőségek." Fiatal Műszakiak Tudományos Ülésszaka 1. (2003) (2003): 59–62. http://dx.doi.org/10.36243/fmtu-2003.17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Charu, Chandra. "Special issue of Human Systems Management (HSM)." Human Systems Management 25, no. 2 (2006): 159–60. http://dx.doi.org/10.3233/hsm-2006-25209.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

De Prisco, Roberto, Alfredo De Santis, and Marco Mannetta. "Reducing costs in HSM-based data centers." Journal of High Speed Networks 24, no. 4 (2018): 363–73. http://dx.doi.org/10.3233/jhs-180600.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Kim, Jin Cheol, Young Eok Kim, and Tae Hun Kim. "Implementation of Secure GOOSE Protocol Using HSM." Applied Mechanics and Materials 260-261 (December 2012): 236–41. http://dx.doi.org/10.4028/www.scientific.net/amm.260-261.236.

Full text

Abstract:

The smart grid is a developing network of transmission lines, equipment, controls and new technologies working together to respond immediately to 21st Century demand for electricity, but the smart grid may also create much new vulnerability if not deployed with the appropriate security controls. In this paper, to evaluate the secure GOOSE message performance, we implemented the IEC 62351-6 MAC mechanism, applied it on F-IED using the IEC 61850 GOOSE stack and the HSM, built the security test environment, and obtained test results.

APA, Harvard, Vancouver, ISO, and other styles

40

Cavalli, Alessandro, Daniele Cesini, Enrico Fattibene, Andrea Prosperini, and Vladimir Sapunenko. "HSM and backup services at INFN-CNAF." EPJ Web of Conferences 214 (2019): 04009. http://dx.doi.org/10.1051/epjconf/201921404009.

Full text

Abstract:

IBM Spectrum Protect (ISP) software, one of the leader solutions in data protection, contributes to the data management infrastructure operated at CNAF, the central computing and storage facility of INFN (Istituto Nazionale di Fisica Nucleare – Italian National Institute for Nuclear Physics). It is used to manage about 55 Petabytes of scientific data produced by LHC (Large Hadron Collider at CERN) and other experiments in which INFN is involved, stored on tape resources as the highest latency storage tier within HSM (Hierarchical Space Management) environment. To accomplish this task, ISP work

APA, Harvard, Vancouver, ISO, and other styles

41

Nathe, T., J. Galea, I. Peru, and C. Celum. "346 CONDOM USE BETWEEN HSM IN PERU." Journal of Investigative Medicine 52, Suppl 1 (2004): S140.2—S140. http://dx.doi.org/10.1136/jim-52-suppl1-346.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Pateloup, Vincent, Hélène Chanal, Emmanuel Duc, and Pascal Ray. "HSM-ADAPTED TOOL PATH CALCULATION FOR POCKETING." Machining Science and Technology 10, no. 2 (2006): 181–96. http://dx.doi.org/10.1080/10910340600710063.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Borean, J. L. "Transverse thermal profile mastering on the HSM." Revue de Métallurgie 103, no. 11 (2006): 500–506. http://dx.doi.org/10.1051/metal:2006129.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Msaddek, El Bechir, Zoubeir Bouaziz, Gilles Dessein, and Maher Baili. "Optimization of pocket machining strategy in HSM." International Journal of Advanced Manufacturing Technology 62, no. 1-4 (2011): 69–81. http://dx.doi.org/10.1007/s00170-011-3801-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Dib, Marc, and Samuel Pierre. "Insider Attack Model Against HSM-Based Architecture." IEEE Access 11 (2023): 86848–58. http://dx.doi.org/10.1109/access.2023.3304994.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Alkaaf, Khalid Ahmed, and Mohamed Abdel-Aty. "Transferability of Safety Performance Functions: The Case of Urban Four-Lane Divided Roadways in Muscat." Vehicles 4, no. 4 (2022): 1096–108. http://dx.doi.org/10.3390/vehicles4040058.

Full text

Abstract:

The Highway Safety Manual (HSM) initial version provides several safety performances functions (SPFs) that can be used to predict collisions on a roadway network. The calibration of the HSM SPFs for Fatal and Injury (FI), Property Damage Only (PDO), and Total crashes for Urban Four-lane Divided Roadway Segments (U4D) in Muscat, Sultanate of Oman, and the development of new SPFs were investigated in this paper. The HSM SPFs were calibrated first with the HSM methodology, and then new forms of specific SPFs were evaluated for Muscat urban roads to determine the best model using the Poisson-Gamma

APA, Harvard, Vancouver, ISO, and other styles

47

Chen, Rixin, Mingren Chen, Tongsheng Su, et al. "A 3-Arm, Randomized, Controlled Trial of Heat-Sensitive Moxibustion Therapy to Determine Superior Effect among Patients with Lumbar Disc Herniation." Evidence-Based Complementary and Alternative Medicine 2014 (2014): 1–7. http://dx.doi.org/10.1155/2014/154941.

Full text

Abstract:

Systematic reviews of moxibustion for LDH have identified ponderable evidence, especially for heat-sensitive moxibustion (HSM). Therefore, we designed and carried out the large sample trial to evaluate it. 456 patients were recruited from 4 centers in China and were randomly divided into three groups by the ratio of 1 : 1 : 1 to HSM (152) group, conventional moxibustion (152) group, and conventional drug plus acupuncture (152) group. Compared with usual care, there was a statistically significant reduction in mean M-JOA score at 2 weeks and 6 months for HSM (3.8 ± 2.6 versus 8.5 ± 2.9; 3.7 ± 2

APA, Harvard, Vancouver, ISO, and other styles

48

Liu, Li Juan, Wen Ge Wu, and Ming Lv. "Design of Database for High Speed Cutting of Difficult-to-Cut Materials." Materials Science Forum 723 (June 2012): 337–42. http://dx.doi.org/10.4028/www.scientific.net/msf.723.337.

Full text

Abstract:

High speed machining (HSM) is one of the main trends of cutting machinery and is an important development direction of advanced manufacturing technology. In our country, the relevant research of HSM database starts later, especially of the cutting of hardworking material, the actual machining and experiment on the machining technology and the machining parameters of HSM are few, the reasonable machining parameters selection scheme and the appropriate cutter choice method are lack. The paper established HSM database system of the hardworking material based on web to improve cutting efficiency.

APA, Harvard, Vancouver, ISO, and other styles

49

Bhutto, A. H., S. Zardari, M. A. Zardari, et al. "Mohr-Coulomb and Hardening Soil Model Comparison of the Settlement of an Embankment Dam." Engineering, Technology & Applied Science Research 9, no. 5 (2019): 4654–58. http://dx.doi.org/10.48084/etasr.3034.

Full text

Abstract:

In this study, numerical analysis of an embankment dam was carried out to predict settlement behavior with the use of the Mohr-Coulomb Model (MCM) and of the Hardening Soil Model (HSM). The MCM was applied to all material zones of the dam and the HSM was used for four major material zones that occupied significant volume. The settlement response of the dam was similar for MCM and HSM for three material zones (clay core, sandy gravel and random fill), each having a modulus of elasticity (MOE) in the range of 25000 to 50000kPa. However, it was found that after the end of the construction, the MC

APA, Harvard, Vancouver, ISO, and other styles

50

Bhutto, Amjad Hussain, Shahnawaz Zardari, Ghulam Shabir Bhurgri, et al. "Mohr-Coulomb and Hardening Soil Model Comparison of the Settlement of an Embankment Dam." Engineering, Technology & Applied Science Research 9, no. 5 (2019): 4654–58. https://doi.org/10.5281/zenodo.3510168.

Full text

Abstract:

In this study, numerical analysis of an embankment dam was carried out to predict settlement behavior with the use of the Mohr-Coulomb Model (MCM) and of the Hardening Soil Model (HSM). The MCM was applied to all material zones of the dam and the HSM was used for four major material zones that occupied significant volume. The settlement response of the dam was similar for MCM and HSM for three material zones (clay core, sandy gravel and random fill), each having a modulus of elasticity (MOE) in the range of 25000 to 50000kPa. However, it was found that after the end of the construction, the MC

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!