Relevant bibliographies by topics / Hub dyno

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Conference papers

Academic literature on the topic 'Hub dyno'

Author: Grafiati
Published: 28 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Hub dyno.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Hub dyno"

1

Tan, Qing, Kai Wang, Yi Min Xia, Kui Zhang, and Zi Jun Xu. "Numerical Simulation of ANSYS-LS/DYNA Induced by Double-Edge Ball Tooth Hob Cutter." Advanced Materials Research 97-101 (March 2010): 3120–23. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3120.

Full text
Abstract:
In order to analyse the rock breakage process of double-edge ball tooth hob cutter and get the related curve of intrusive force and invasion depth, the numerical simulation model of double-edge ball tooth hob cutter is accurately established. In the process of interaction between hob cutter and rock mass, the material model is also established, the mechanism of rock fragmentation is carefully researched, the elastic-plastic deformation is seriously studied. Finally, we design an experiment which has a good consistency with the simulation analysis.
APA, Harvard, Vancouver, ISO, and other styles
2

Ma, Yong, Xin Hua Dong, and Qi Huang. "Tooth Root Stress Analysis of Gear Processed by Full Radius Hob Based on ANSYS/LS-DYNA." Advanced Materials Research 479-481 (February 2012): 1409–13. http://dx.doi.org/10.4028/www.scientific.net/amr.479-481.1409.

Full text
Abstract:
According to principle of hobbing, this paper set up accurate model of gear processed by full radius hob based on ANSYS/LS-DYNA software. A dynamic contact analysis of gears are completed and we gets stress distribution of tooth root as time changes, making foundation for future study and optimization design of full radius hob.
APA, Harvard, Vancouver, ISO, and other styles
3

Meier, Oliver, Karin Boucke, Silvija Vig Hammer, et al. "Adenovirus triggers macropinocytosis and endosomal leakage together with its clathrin-mediated uptake." Journal of Cell Biology 158, no. 6 (2002): 1119–31. http://dx.doi.org/10.1083/jcb.200112067.

Full text
Abstract:
Adenovirus type 2 (Ad2) binds the coxsackie B virus Ad receptor and is endocytosed upon activation of the αv integrin coreceptors. Here, we demonstrate that expression of dominant negative clathrin hub, eps15, or K44A-dynamin (dyn) inhibited Ad2 uptake into epithelial cells, indicating clathrin-dependent viral endocytosis. Surprisingly, Ad strongly stimulated the endocytic uptake of fluid phase tracers, coincident with virus internalization but without affecting receptor-mediated transferrin uptake. A large amount of the stimulated endocytic activity was macropinocytosis. Macropinocytosis depe
APA, Harvard, Vancouver, ISO, and other styles
4

Suljević, Enver, Muhamed Fazlić, Jozo Čorić, and Emina Kiseljaković. "Evaluation of haematology analyzer CELL-DYN 3700 SL." Bosnian Journal of Basic Medical Sciences 3, no. 2 (2003): 35–41. http://dx.doi.org/10.17305/bjbms.2003.3553.

Full text
Abstract:
Research on the parameters of full blood count and differential white blood count is included in the program of all medical laboratories of primary, secondary and tertiary health care levels. Today, all haematological tests are exclusively performed on the haematology analyzers. Automation of haematology laboratories is a result of the huge requires for haematological test performing, timely issuing of the haematological findings, and possibility of the usage of modern techniques.This work is an evaluation of laser haematology analyzer Cell-Dyn 3700 SL. It investigates the reliability of test
APA, Harvard, Vancouver, ISO, and other styles
5

TRZECIAK, M. A., and W. MEISSNER. "Stability of HCT, HGB and RBC values in the Mute Swan (Cygnus olor) blood stored at 4°c and 24°c differs between traditional and multi-parameter automated methods." Journal of the Hellenic Veterinary Medical Society 69, no. 3 (2018): 1141. http://dx.doi.org/10.12681/jhvms.18887.

Full text
Abstract:
The objective of this study was to evaluate the influence of time of sample storage, method of analysis, and storage temperature on stability of HCT, HGB, and RBC in avian blood samples. Blood samples from mute swans were stored at 24°C or 4°C. Analyses of HCT, HGB, and RBC were carried out after 5 and 25 hours after collection of blood using both traditional and Cell-Dyn 3700 analyzer methods. Storage temperature had no significant influence on HCT, HGB, and RBC values of mute swan blood. However hematological parameters obtained by the traditional method were significantly lower than the res
APA, Harvard, Vancouver, ISO, and other styles
6

Eric Wirtanto, Michael Lim, and Zuhrina Masyithah. "KAJIAN KEMURNIAN DAN PENGARUH NISBAH PEREAKSI, pH AWAL REAKSI DAN SUHU REAKSI TERHADAP NILAI CMC & HLB NATRIUM LIGNOSULFONAT." Jurnal Teknik Kimia USU 1, no. 1 (2012): 15–19. http://dx.doi.org/10.32734/jtk.v1i1.1400.

Full text
Abstract:
Sodium lignosulphonate (SLS) is a product of isolated lignin sulphonation process using NaHSO3 as sulphonation agent.The research begins with isolated lignin from palm shell amd continued with sulphonation with mass ratio of palm shell lignin – NaHSO3(b/b) of 1:0.2, 1:0.3, and 1:0.5 and initial pH of 6, 7, and 8 at temperature 85 oC and 95 oC. The purity of SLS made in this studies was 66,782 %. The CMC value of this SLS ranged from 0,014 – 0,052; while the lowering of surface tension of water ranged from 53,63 – 59,83 dyne/cm. The HLB value ranged from 3,805 – 4,278; means that this surfactan
APA, Harvard, Vancouver, ISO, and other styles
7

Arlt, Nicole, Remo Rothe, and Rainer Moog. "Validation of blood counters for quality control of platelet concentrates with high platelet counts." LaboratoriumsMedizin 42, no. 5 (2018): 201–4. http://dx.doi.org/10.1515/labmed-2018-0062.

Full text
Abstract:
AbstractBackgroundBlood counters are primarily used to measure peripheral blood cells including platelets (PLTs). In routine quality control of platelet concentrates (PCs), counters are also used to analyze very high PLT counts. To meet the requirements of national and European guidelines for quality assurance, the accuracy of counting very high PLT counts has to be validated. The aim of the present study was to validate four blood counters (one of which has two detection methods) focusing on the PLT count.MethodsThe comparison was performed with PCs using the blood counter devices CELL-DYN Ru
APA, Harvard, Vancouver, ISO, and other styles
8

Nugraha, Gilang, Nur Anita Ningsih, Titik Sulifah, and Sitti Fitria. "STABILITAS PEMERIKSAAN HEMATOLOGI RUTIN PADA SAMPEL DARAH YANG DIDIAMKAN PADA SUHU RUANG MENGGUNAKAN CELL-DYN RUBY." JOURNAL OF MUHAMMADIYAH MEDICAL LABORATORY TECHNOLOGIST 4, no. 1 (2021): 21. http://dx.doi.org/10.30651/jmlt.v4i1.8255.

Full text
Abstract:
Complete blood count (CBC) is one of the laboratory tests most often influenced by doctors. The use of a hematology analyzer offers a wider range of probe parameters. The pre-analytic stage accounts for 70% of errors, one of which is the delay of the examination. Changes in report results were reported due to changes in blood cell morphology due to EDTA additives and room temperature. The aim of this research is the disturbance of stability of the results of examination of various CBC parameters in blood samples that are left at room temperature for 24 hours using a hematology analyzer. This e
APA, Harvard, Vancouver, ISO, and other styles
9

Kokorin, V. N., P. V. Yemeniev, O. G. Duyun, and O. G. Krupennikov. "STUDY OF EFFICIENCY OF DRUM DRYERS OF METALLURGICAL PRODUCTIONS USING PERFORATED PIPES WITH LOCALIZATION OF HEAT FLOWS." Spravochnik. Inzhenernyi zhurnal, no. 282 (September 2020): 31–40. http://dx.doi.org/10.14489/hb.2020.09.pp.031-040.

Full text
Abstract:
The article presents the design of a drum furnace, providing for the provision of differentiated heat flows through the use of an internal perforated pipe. The design of the presented horizontal drum dryer with a perforated tube having openings is designed to eliminate such technological risk factors as the ignition of the oil component of the processed material, and the metal dispersed material itself having pyrophoric properties. As a result of the numerical simulation using the LS–DYNA program, the temperature and heat fluxes in the quasi-boiling zone of the drained oil-containing dispersed
APA, Harvard, Vancouver, ISO, and other styles
10

Kokorin, V. N., P. V. Yemeniev, O. G. Duyun, and O. G. Krupennikov. "STUDY OF EFFICIENCY OF DRUM DRYERS OF METALLURGICAL PRODUCTIONS USING PERFORATED PIPES WITH LOCALIZATION OF HEAT FLOWS." Spravochnik. Inzhenernyi zhurnal, no. 282 (September 2020): 31–40. http://dx.doi.org/10.14489/hb.2020.09.pp.031-040.

Full text
Abstract:
The article presents the design of a drum furnace, providing for the provision of differentiated heat flows through the use of an internal perforated pipe. The design of the presented horizontal drum dryer with a perforated tube having openings is designed to eliminate such technological risk factors as the ignition of the oil component of the processed material, and the metal dispersed material itself having pyrophoric properties. As a result of the numerical simulation using the LS–DYNA program, the temperature and heat fluxes in the quasi-boiling zone of the drained oil-containing dispersed
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Hub dyno"

1

Odložilík, Daniel. "Zařízení pro testování diferenciálů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445172.

Full text
Abstract:
This master’s thesis deals with the design of equipment for testing differentials. The aim of the thesis is therefore the design of a special device that will be able to measure the steady and transient characteristics of differentials. Master’s thesis is divided into four chapters. The first chapter points out the disadvantages of fully open and closed differentials, the second deals with a basic overview of the structures and design of self-locking differentials. The third chapter deals with research of existing devices that test and measure the characteristics of differentials. The fourth c
APA, Harvard, Vancouver, ISO, and other styles
2

"Airport Dubai – Evaluation of Dubai as a First Choice Hub for International Travellers." Institut für Transportwirtschaft und Logistik, 2005. http://epub.wu-wien.ac.at/dyn/dl/wp/epub-wu-01_105a.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Hub dyno"

1

Y dyn yn y cefn heb fwstash a storïau eraill. Y Lolfa, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cyfres Storiau Hud: Dyn Eira. Rily Publications Limited, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Hub dyno"

1

Determan, William R., and David Grimmett. "Recent Developments in the Recovery of SNAP-DYN Technical Data Base." In SPACE TECHNOLOGY AND APPLICATIONS INTERNATIONAL FORUM-STAIF 2007: 11th Conf Thermophys.Applic.in Micrograv.; 24th Symp Space Nucl.Pwr.Propulsion; 5th Conf Hum/Robotic Techn & Vision Space Explor.; 5th Symp Space Coloniz.; 4th Symp New Frontrs & Future Con. AIP, 2007. http://dx.doi.org/10.1063/1.2437486.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography