Relevant bibliographies by topics / Hybridní materiál / Journal articles
To see the other types of publications on this topic, follow the link: Hybridní materiál.

Journal articles on the topic 'Hybridní materiál'

Author: Grafiati
Published: 4 June 2021
Last updated: 5 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Hybridní materiál.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Gaballah, Mahmoud M., Azza M. Metwally, Milan Skalicky, Mohamed M. Hassan, Marian Brestic, Ayman EL Sabagh, and Aysam M. Fayed. "Genetic Diversity of Selected Rice Genotypes under Water Stress Conditions." Plants 10, no. 1 (December 24, 2020): 27. http://dx.doi.org/10.3390/plants10010027.

Full text
Abstract:
Drought is the most challenging abiotic stress for rice production in the world. Thus, developing new rice genotype tolerance to water scarcity is one of the best strategies to achieve and maximize high yield potential with water savings. The study aims to characterize 16 rice genotypes for grain and agronomic parameters under normal and drought stress conditions, and genetic differentiation, by determining specific DNA markers related to drought tolerance using Simple Sequence Repeats (SSR) markers and grouping cultivars, establishing their genetic relationship for different traits. The experiment was conducted under irrigated (normal) and water stress conditions. Mean squares due to genotype × environment interactions were highly significant for major traits. For the number of panicles/plants, the genotypes Giza179, IET1444, Hybrid1, and Hybrid2 showed the maximum mean values. The required sterility percentage values were produced by genotypes IET1444, Giza178, Hybrid2, and Giza179, while, Sakha101, Giza179, Hybrid1, and Hybrid2 achieved the highest values of grain yield/plant. The genotypes Giza178, Giza179, Hybrid1, and Hybrid2, produced maximum values for water use efficiency. The effective number of alleles per locus ranged from 1.20 alleles to 3.0 alleles with an average of 1.28 alleles, and the He values for all SSR markers used varied from 0.94 to 1.00 with an average of 0.98. The polymorphic information content (PIC) values for the SSR were varied from 0.83 to 0.99, with an average of 0.95 along with a highly significant correlation between PIC values and the number of amplified alleles detected per locus. The highest similarity coefficient between Giza181 and Giza182 (Indica type) was observed and are susceptible to drought stress. High similarity percentage between the genotypes (japonica type; Sakha104 with Sakha102 and Sakha106 (0.45), Sakha101 with Sakha102 and Sakha106 (0.40), Sakha105 with Hybrid1 (0.40), Hybrid1 with Giza178 (0.40) and GZ1368-S-5-4 with Giza181 (0.40)) was also observed, which are also susceptible to drought stress. All genotypes are grouped into two major clusters in the dendrogram at 66% similarity based on Jaccard’s similarity index. The first cluster (A) was divided into two minor groups A1 and A2, in which A1 had two groups A1-1 and A1-2, containing drought-tolerant genotypes like IET1444, GZ1386-S-5-4 and Hybrid1. On the other hand, the A1-2 cluster divided into A1-2-1 containing Hybrid2 genotype and A1-2-2 containing Giza179 and Giza178 at coefficient 0.91, showing moderate tolerance to drought stress. The genotypes GZ1368-S-5-4, IET1444, Giza 178, and Giza179, could be included as appropriate materials for developing a drought-tolerant variety breeding program. Genetic diversity to grow new rice cultivars that combine drought tolerance with high grain yields is essential to maintaining food security.
APA, Harvard, Vancouver, ISO, and other styles
2

Kobliha, J., and V. Janeček. "Development of hybrid fir clonal material." Journal of Forest Science 51, Special Issue (May 17, 2019): 3–12. http://dx.doi.org/10.17221/11842-jfs.

Full text
Abstract:
There are four testing plots with hybrid clonal material. This material is regularly measured and some characteristics are observed. This paper sumarizes results of measurements from years 1998, 2000 and 2002. Hybrid material is compared with control material Abies alba from open pollination. Results show, that hybrid clonal material grow orthotropically and most of them are better in growth characteristics in comparison with control material Abies alba from open pollination. Mortality is also very low. All this mean high potential of this material to the future not only for further breeding, but also for use in special plantations.
APA, Harvard, Vancouver, ISO, and other styles
3

Marquart, Reiner, and Alexander Pifczyk. "Hybrides Projektmanagement." VDI-Z 161, no. 12 (2019): 70–71. http://dx.doi.org/10.37544/0042-1766-2019-12-70.

Full text
Abstract:
Klassisches oder agiles Projektmanagement? Diese Frage hat sich in vielen Unternehmen zur Glaubensfrage entwickelt. Dabei haben beide Ansätze Stärken und Schwächen. Deshalb ist es in der Praxis oft sinnvoll, das Beste beziehungsweise Zielführendste aus den beiden Projektmanagement-Welten zu vereinen.
APA, Harvard, Vancouver, ISO, and other styles
4

VanVolkenburg, Heather, Frédérique C. Guinel, and Liette Vasseur. "Impacts of Smooth Pigweed (Amaranthus hybridus) on Cover Crops in Southern Ontario." Agronomy 10, no. 4 (April 8, 2020): 529. http://dx.doi.org/10.3390/agronomy10040529.

Full text
Abstract:
Amaranthus hybridus is a noxious weed in Ontario, with demonstrated allelopathic properties that can lead to decreased agricultural production. We tested the germination and growth of five cover crop species exposed to A. hybridus extracts, and to dried or fresh materials in soil. A germination index was calculated, and the dry weight of plant organs were measured to quantify responses to treatments. All species had reduced germination (≤29%) in 100% extract. Trifolium pratense had significant root weight reductions in extract (52%) and dried (72%) treatments, whereas shoot weight only decreased (48%) in dried treatment. Medicago sativa shoot weight decreased (52%) in 20g fresh treatment, while root weight decreased (62%) in dried treatment. Shoot weight of Raphanus sativus increased (32%) at mid-extract concentrations, while root weight increased (33%) only with dried treatment; however, both its shoot and root weight decreased (>40%) in fresh treatment. Only the shoot weight of Lolium multiflorum increased (41% in 75% extract and 55% in dried treatment). Both Cichorium intybus shoot and root weights decreased (~50%) in fresh treatment. Crop responses to A. hybridus are complex, and material and species-dependant. Further testing in the field may provide a more comprehensive understanding of how to improve the management of A. hybridus.
APA, Harvard, Vancouver, ISO, and other styles
5

Montaser, Mahgoub Osman, Jia Liang Zhou, Mohamed Nourrein, Chong Li, Heng Xue Xiang, Bin Sun, and Mei Fang Zhu. "Preparation PET Hybrided Materials by In Situ Polymerization for Delustered Fibers." Materials Science Forum 898 (June 2017): 2166–73. http://dx.doi.org/10.4028/www.scientific.net/msf.898.2166.

Full text
Abstract:
A series of polyethylene terephthalate (PET) hybrid materials with high-load TiO2 content were prepared via in situ polymerization by dispersing unmodified titanium dioxide (TiO2) in Ethylene Glycol (EG), and the influence of load TiO2 nanofillers on the physical properties of PET masterbatch was investigated. The intrinsic viscosities of the prepared PET hybrid materials were affected by the addition of the nanoparticles and in both cases a slight decrease was observed. In addition, the thermal behavior of these PET hybrid materials and neat PET was investigated using Differential Scanning Calorimetry (DSC). The chemical structures of PET hybrid materials were characterized by Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM). The TiO2 nanoparticles show well dispersibility in PET matrix. The PET hybrid material with 40wt.% TiO2 content was used as master batch to prepare full dull PET fiber with 2.5 wt.% TiO2. The melt flow ability of PET hybrid materials shows good winding and drawing performance, and also the resulted fiber has better mechanical properties than neat PET fiber. It suggests that this PET/TiO2 masterbatch by in situ polymerization may find good application for delustered fiber preparation.
APA, Harvard, Vancouver, ISO, and other styles
6

Friedrich, Horst E., and Gundolf Kopp. "New Materials and Construction Methods for Multi-Material-Design, Lightweight Construction and Modularity in Future Vehicle Concepts." Materials Science Forum 539-543 (March 2007): 51–57. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.51.

Full text
Abstract:
Besides reducing fuel consumption, the chief motivating factor behind the development of new vehicle structures is the desire to decrease climate-affecting emissions. One approach to addressing this involves reducing the vehicle mass and, as such, the various strategies relating to lightweight construction. Various methods of lightweight construction are used as a basis for deriving the technically relevant criteria for designs and material concepts. The work conducted in this field today centres around the synthesis of construction method and material development with the objective of devising a multi-material-design [1, 2]. Modularisation is an economic approach aimed at shaping the diversification of the vehicle concepts and implementing this effectively [3]. As a result of hybrid and later fuel cell drives, the requirements on the vehicle concepts will continue to grow in future. Modularisation also sometimes opposes the striving for a high level of integration. The modular lightweight concept of the DLR aims at designing powertrain evolutions in a scalable and cost-efficient manner and in a way that retains the concept flexibility or, in some cases, even increases this. These approaches lead to the strategy known as “hybrid3”. This strategy not only involves matching different materials and various construction methods with each other, but also taking account of the integration of functional effects. This entails, for example, optimising the design of thin-walled structural components in terms of their vibratory or acoustic properties with structure- integrated, active materials. Further examples of the approach with “hybrid3” effects could be selectable surfaces or integrated energy conversion. The various development directions are depicted in the form of a roadmap and discussed on the basis of forward-looking examples from the field of vehicle construction.
APA, Harvard, Vancouver, ISO, and other styles
7

Ma, Chong Jian, Hui Ming, and Hua Shou Li. "Study of Red Mud Improvement with the Mixing Method and the Impact of Pennisetum hybridum Plantation on Red Mud Amendment." Advanced Materials Research 807-809 (September 2013): 392–401. http://dx.doi.org/10.4028/www.scientific.net/amr.807-809.392.

Full text
Abstract:
currently, the comprehensive utilization of red mud has been a worldwide challenge. Due to high alkaline level and a serious lack of nutrients, a great amount of red mud has been stocked in the open rather than covered by plantations, which showed harms to the atmosphere, water and soil environment. In order to explore a more effective phytoremediation approach of red mud and screen plants with strong tolerance, the research group applied Pennisetum hybridum as the experiment material for a long term, which is a new energy plant in the field of ecological environmental management and restoring. Through the addition of different types of addictives, his experiment conducted the plantation Pennisetum hybridum based on red mud improvement matrix. Besides, a systematic research of the improvement effects of different ameliorants on red mud was conducted. Concurrently, the growth of Pennisetum hybridum in different groups of the experiment was investigated. Their mutual effect on the improvement effect of red mud was analyzed systematically. Results demonstrated that effective raw materials of red mud improvement include phosphogypsum, wastes of polluted and edible mushrooms. These can significantly reduce the pH and conductivity of red mud. After the improvement, Pennisetum hybridum can grow vigorously in the mixture matrix of red mud, and significantly improve the red mud matrix. Concurrently, considerable biomasses were obtained. The experiment results demonstrated that the addition of necessary nutriments for the plant growth was very important for red mud. The research has laid a solid foundation for the identification of the great potentials of Pennisetum hybridum in red mud phytoremediation, the further exploration of its role of restoring of red mud and the extensive application and promotion in the future.
APA, Harvard, Vancouver, ISO, and other styles
8

Akimune, Yoshio, Hiroshi Tsuda, and Junji Takatsubo. "Hybrid Sensing Technology and Diagnostic Technology(International Workshop on Smart Materials and Structural Systems, W03 Jointly organized by Material & Processing Division, Material & Mechanics Division, Dynamics & Control Division and Space Engineering Division.)." Reference Collection of Annual Meeting 2004.8 (2004): 307–8. http://dx.doi.org/10.1299/jsmemecjsm.2004.8.0_307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Klimova, Elena, Ivan Fesenko, Elena Kuznetsova, Ján Brindza, Gyunesh Nasrullaeva, Olga Rezunova, and Elena Kuznetsova. "Assessment of a new artificial buckwheat species Fagopyrum hybridum as a source of plant raw materials compared to F. Tataricum and F. Esculentum." Potravinarstvo Slovak Journal of Food Sciences 14 (August 28, 2020): 625–32. http://dx.doi.org/10.5219/1393.

Full text
Abstract:
A promising way to increase the use of buckwheat is the wider introduction of technologies for its processing, including grinding of non-hulled grain. It requires the search for new plant materials with more suitable characteristics. In this work, the possibilities to use the grain of a new artificial buckwheat species Fagopyrum hybridum for flour production are studied in comparison with two cultivated species F. tataricum and F. esculentum. Some chemical characteristics of F. hybridum flour were evaluated. According to the size of the kernel fragments in different modes of milling within each species the significant differences were identified within F. esculentum and F. hybridum (p <0.001 and p <0.05, respectively); there were no significant differences within F. tataricum (p >0.1). Fragments of the seed hulls of F. tataricum and F. hybridum compared to ones of F. esculentum were distinguished by the absence of pronounced acute angles. For the cultivated species, amino acid compositions of grain protein of the studied samples manifest no strong deviations from earlier published results. The new species F. hybridum has the amino acid composition similar to ones of the both cultivated species with slight superiority in the content of all essential amino acids. So, the content of Cysteine, Tryptophan, Arginine, Lysine, Methionine, Leucine + Isoleucine, Threonine, Histidine and Valine in seeds of F. hybridum was 5.2, 15.0, 25.8, 30.2, 31.2, 36.0, 38.4, 41.1 and 46.2% higher compared to F. tataricum and 11.1, 43.7, 39.2, 3.7, 31.2, 15.2, 14.8, 20.0, 18.9% higher compared to F. esculentum. Using DPPH it was assessed the antioxidant activity (AOA) of whole grain flour of three buckwheat species and decreasing of the AOA during heating up to 100 °C. After water extraction the AOA was maximal for F. tataricum flour; F. hybridum and F. esculentum manifested similar values with the same decline dynamics during heating. After ethanol extraction the flour of F. hybridum shown higher AOA compared to both cultivated species before temperature treatment (1.3 times) as well as after heating to 100 °C (1.2 times). The results of the analysis of the fractional composition of flour from the whole grain of the three buckwheats shown the fragments of the seed hulls of F. tataricum and F. hybridum compared to ones of F. esculentum were characterized by the absence of pronounced acute angles. Additional experiments are needed to optimize the technology of whole-grain buckwheat flour. But the grain of F. tataricum and F. hybridum looks like more suitable for these purposes than the non-hulled grain of F. esculentum.
APA, Harvard, Vancouver, ISO, and other styles
10

Ke, Gang. "Preparation and Characterization of Carbon Nanotubes/Hydroxyethyl Cellulose Hybrid Material." International Journal of Chemical Engineering and Applications 8, no. 2 (April 2017): 131–35. http://dx.doi.org/10.18178/ijcea.2017.8.2.644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

M, Goutham, Mahesh V. M, and Muralidhara B. K. "Studies on Hybrid Material Reinforced Copper Based Composites- A Review." International Journal of Trend in Scientific Research and Development Volume-3, Issue-2 (February 28, 2019): 302–5. http://dx.doi.org/10.31142/ijtsrd20226.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Kosch, K. G., P. Freytag, T. Matthias, K. Kerber, and A. Bouguecha. "Verbund-Gießschmieden hybrider Aluminiumbauteile." Materialwissenschaft und Werkstofftechnik 44, no. 10 (October 2013): 819–24. http://dx.doi.org/10.1002/mawe.201300125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Oteo, J. L., M. R. Elvira, L. Alonso, and J. Rubio. "Tratamientos de protección superficial de materiales de construcción por nuevos materiales híbridos organo-inorgánicos multifuncionales." Boletín de la Sociedad Española de Cerámica y Vidrio 45, no. 2 (April 30, 2006): 96–102. http://dx.doi.org/10.3989/cyv.2006.v45.i2.319.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Ayodele, Olusoji Oluremi, Mxolisi Brendon Shongwe, Peter Apata Olubambi, Babatunde Abiodun Obadele, and Thabiso Langa. "Hybrid Spark Plasma Sintering of Materials: A Review." International Journal of Materials, Mechanics and Manufacturing 6, no. 6 (December 2018): 360–64. http://dx.doi.org/10.18178/ijmmm.2018.6.6.407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Mildebrath, Maximilian, Hans Jürgen Maier, Thomas Hassel, Timm Coors, Florian Pape, Gerhard Poll, Alexander Barroi, Marius Lammers, Jörg Hermsdorf, and Ludger Overmeyer. "Herstellungsprozess und Wälzfestigkeit von hybriden Hochleistungsbauteilen/Manufacturing of Hybrid High-Performance Components under Rolling Contact Fatigue." Konstruktion 70, no. 09 (2018): 84–89. http://dx.doi.org/10.37544/0720-5953-2018-09-84.

Full text
Abstract:
Inhalt: Moderne Massivbauteile werden herkömmlich aus Monomaterialien gefertigt. Viele Bauteile besitzen dabei Funktions- und Strukturbereiche, welche durch unterschiedliche Beanspruchungsprofile sehr unterschiedliche Anforderungen an den Konstruktionswerkstoff stellen. Somit ermöglicht das eingesetzte Material oft nur einen Kompromiss hinsichtlich der geforderten Materialeigenschaften und der Leistungsfähigkeit des Bauteils. Im Sonderforschungsbereich 1153 „Tailored Forming“ an der Leibniz Universität Hannover (LUH) werden neue Prozessketten zur Realisierung hoch belastbarer hybrider Massivbauteile entwickelt. In Zusammenarbeit des Instituts für Werkstoffkunde (IW) und des Instituts für Maschinenkonstruktion und Tribologie (IMKT) wurden hybride Lagerscheiben zum Einsatz als Axial-Zylinderrollenlagern entwickelt. Diese wurden mittels Plasma-Pulver-Auftragschweißen (PPA) aus Vergütungsstahl hergestellt (Bild 1) und anschließend bezüglich Ihrer Wälzfestigkeit untersucht. Diese Untersuchungen dienen als Grundlage zur Evaluierung von Leistungsfähigkeit und Qualität des Beschichtungsprozesses sowie der Materialeigenschaften. Mit ersten hybrid hergestellten Rohlingen werden Maschinenelemente gefertigt, um die Eignung des Prozesses für industrielle Anwendungen zu bewerten. &nbsp; Abstract: Modern solid components are conventionally manufactured from monomaterials. Many components are equipped with functional and structural areas, which have to fulfil various demands regarding the construction material due to different stress profiles. Thus, the applied material offers a trade-off concerning the required material properties and the performance of the component. The Collaborative Research Center 1153 „Tailored Forming“ at Leibniz Universität Hannover (LUH) is developing new process chains for the realization of highly resilient hybrid solid components. In cooperation with the Institute of Materials Science (IW) and the Institute of Machine Design and Tribology (IMKT), multi-material bearing discs were developed for use as cylindrical roller thrust bearings. These were produced by plasma powder deposition welding (PPA) from heat treatable steel (Figure 1) on a steel substrate and then tested under rolling contact loads. These investigations serve as a basis for evaluating the performance and quality of the coating process as well as the material properties. In this publication, the above concept was proven for first hybrid produced workpieces in order to assess the suitability of the process for industrial applications.
APA, Harvard, Vancouver, ISO, and other styles
16

Nkobole, Nolitha, and Gerhard Prinsloo. "1H-NMR and LC-MS Based Metabolomics Analysis of Wild and Cultivated Amaranthus spp." Molecules 26, no. 4 (February 4, 2021): 795. http://dx.doi.org/10.3390/molecules26040795.

Full text
Abstract:
Amaranthus crops are important for their use as food and nutritional sources, as well as for their medicinal properties. They are mostly harvested from the wild, and cultivation of Amaranthus species is still rare, and therefore, attempts are being made to commercialize and market this important crop. This research investigated the effect of cultivation and environment on the chemical profile of both cultivated and wild A. cruentus and A. hybridus by multivariate statistical analysis of spectral data deduced by Nuclear Magnetic Resonance (NMR). Furthermore, wild samples of A. cruentus and A. hybridus were subjected to Liquid Chromatography-Mass Spectrometry (LC-MS) for further analysis. Through NMR analysis, it was found that maltose and sucrose increased in both cultivated A. cruentus and A. hybridus. Moreover, the amino acid, proline was present in cultivated A. cruentus in high quantity whereas, proline and leucine were prominent in A. hybridus. Other compounds that were found in both wild and cultivated A. cruentus and A. hybridus are trehalose, trigonelline, lactulose, betaine, valine, alanine, fumarate, formate and kynurenine. LC-MS analysis revealed the presence of rutin, 2-phenylethenamine and amaranthussaponin I in both wild A. cruentus and A. hybridus, while chlorogenic acid was identified only in cultivated A. hybridus. On the contrary, L-tryptophan, kaempferol, phenylalanine and quercetin were detected only in wild A. cruentus. Amaranth is not only rich in macro and micronutrients, but the leaves also contain phytochemicals that vary between species and cultivated plants, and might, therefore, affect the medicinal properties of the material.
APA, Harvard, Vancouver, ISO, and other styles
17

Ajana Boutaleb, S., A. Haddout, M. Chagdali, and G. Villoutreix. "Modélisation globale des paliers hybrides." Matériaux & Techniques 95, no. 1 (2007): 27–35. http://dx.doi.org/10.1051/mattech:2007028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Pooniya, Vikash, Mr Pravin Kumar, and Dr Deepika Chauhan Md Asif Iqbal. "Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (April 30, 2018): 830–34. http://dx.doi.org/10.31142/ijtsrd11105.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Behrens, B. A., and F. Holz. "Verbundschmieden hybrider Stahl-Aluminium Bauteile." Materialwissenschaft und Werkstofftechnik 39, no. 9 (September 2008): 599–603. http://dx.doi.org/10.1002/mawe.200800330.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Tang, Yujia, Yirong Xiao, Zizhong Tang, Weiqiong Jin, Yinsheng Wang, Hui Chen, Huipeng Yao, Zhi Shan, Tongliang Bu, and Xiaoli Wang. "Extraction of polysaccharides from Amaranthus hybridus L. by hot water and analysis of their antioxidant activity." PeerJ 7 (June 13, 2019): e7149. http://dx.doi.org/10.7717/peerj.7149.

Full text
Abstract:
Background Amaranthus hybridus L. is an annual herb that belongs to the Amaranthceae family, a type of multi-purpose grain, vegetable and feed crop that has received considerable attention due to its great economic value. However, the composition of polysaccharides from A. hybridus has rarely been previously reported. Methods In this study, the aboveground part of A. hybridus was used as material and polysaccharides were isolated by the hot water extraction method. Two acidic polysaccharides were isolated and purified by the Sevage method and diethylaminoethyl cellulose-32 column chromatography. Results Two acidic polysaccharides were obtained from A. hybridus: AHP-H-1 and AHP-H-2. There were significant differences between the monosaccharide content from each sample according to gas chromatography-mass spectrometer. AHP-H-2 had higher antioxidant activity in vitro than AHP-H-1. The 2,2-diphenyl-1-picrylhydrazyl radical scavenging rate of two mg/mL AHP-H-2 was 80%, its hydroxyl radical scavenging rate was approximately 48.5%, its superoxide anion radical scavenging rate was 85.3% and its reduction ability of Fe3+ was approximately 0.92. The total antioxidant capacity of each milligram of AHP-H-2 was 6.5, which was higher than ascorbic acid. Conclusion The results of the study promote the effective use of A. hybridus and provide a theoretical basis for its development.
APA, Harvard, Vancouver, ISO, and other styles
21

JITARAȘU, Octavian. "HYBRID COMPOSITE MATERIALS FOR BALLISTIC PROTECTION. A NUMERICAL ANALYSIS." Review of the Air Force Academy 17, no. 2 (December 16, 2019): 47–56. http://dx.doi.org/10.19062/1842-9238.2019.17.2.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Sheshkar, Vinod, and Yogesh Yadav. "A Review - Structural design of leaf spring by using Hybrid Composite Material." International Journal of Trend in Scientific Research and Development Volume-2, Issue-4 (June 30, 2018): 1484–87. http://dx.doi.org/10.31142/ijtsrd14334.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Behrens, B., A. Chugreev, and T. Matthias. "Hybride Lagerbuchsen aus Aluminium und Stahl*/Numerical process design for the production of a hybrid bearing bushing made of aluminium and steel." wt Werkstattstechnik online 108, no. 10 (2018): 691–97. http://dx.doi.org/10.37544/1436-4980-2018-10-55.

Full text
Abstract:
Im Fokus dieses Beitrages steht die numerische Prozessauslegung zur Herstellung einer hybriden Lagerbuchse aus Aluminium und Stahl. Aufgrund der unterschiedlichen thermo-physikalischen Eigenschaften der Werkstoffe ergeben sich Herausforderungen bei der Umformung der hybriden Halbzeuge. Im Beitrag werden geeignete Umformtemperaturbereiche definiert, bei denen die beteiligten Verbundpartner vergleichbare Fließeigenschaften aufweisen, sowie die numerische Prozessauslegung vorgestellt. &nbsp; This paper focuses on the numerical process design of a hybrid bearing bushing made of aluminium and steel using tailored forming. The different thermo-physical properties of the materials bring about challenges in the forming of the hybrid semi-finished products. Suitable forming temperature ranges are defined in which the two materials have comparable flow properties, and the numerical process design is presented.
APA, Harvard, Vancouver, ISO, and other styles
24

Hou, Feng Yan, Ian Mardon, Jun Zhe Dong, and Chris Goode. "Innovative Surface Technologies to Create Protective Functional Coatings on Light Metal Alloys." Key Engineering Materials 876 (February 2021): 31–38. http://dx.doi.org/10.4028/www.scientific.net/kem.876.31.

Full text
Abstract:
Weight reduction in automotive and aerospace components can improve energy efficiency, reduce emissions, and increase performance. The adoption of light metals such as aluminium, magnesium and titanium alloys, is essential to these performance improvements; however, these alloys require protective surface coatings to prevent corrosion and resulting mechanical failures during service life. Traditional protective coatings for light-weight materials can be costly in terms of energy, raw materials, and environmental sustainability. New durable coating approaches are required to allow light-weight materials to be fully exploited in high performance applications. Novel Cirrus HybridTM coatings, a recent innovation in surface finishing, can protect a wide range of light metal alloy components using a sustainable, non-toxic process. Cirrus HybridTM coating technology deposits a thin-film, inorganic coating that bonds tightly to the light-metal alloy substrate. The process is energy efficient, does not rely on hazardous chemicals, and is up to 5 times thinner than traditional coatings for light metals. A Cirrus HybridTM coating provides excellent anti-corrosion, scratch, and wear properties, along with superior tribological, electrical, and optical performance. This paper updates the art of these innovative new coating technologies for reducing weight in industrial components without compromising functionality or performance.
APA, Harvard, Vancouver, ISO, and other styles
25

Habbal, Abderrahmane, Lionel Fourment, and Tien Tho Do. "Algorithmes hybrides pour l’optimisation globale." European Journal of Computational Mechanics 17, no. 3 (January 2008): 303–22. http://dx.doi.org/10.3166/remn.17.303-322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Reséndiz-Hernández, P. J., D. A. Cortés-Hernández, M. M. G. Saldívar-Ramírez, I. O. Acuña-Gutiérrez, A. Flores-Valdés, S. Torres-Rincón, and J. Méndez-Nonell. "Novel bioactive materials: silica aerogel and hybrid silica aerogel/pseudowollastonite." Boletín de la Sociedad Española de Cerámica y Vidrio 53, no. 5 (October 31, 2014): 235–39. http://dx.doi.org/10.3989/cyv.282014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Cheng, S. A., and T. F. Otero. "Materiales híbridos polipirrol-heteropoliwolframato electrosíntesis de electrodos para baterías secundarias." Boletín de la Sociedad Española de Cerámica y Vidrio 39, no. 3 (June 30, 2000): 374–76. http://dx.doi.org/10.3989/cyv.2000.v39.i3.862.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

García-Perulero, I., S. Murcia-Mascarós, J. Rubio, and J. L. Oteo. "Síntesis y caracterización de materiales híbridos orgánico-inorgánicos de APS/PDMS." Boletín de la Sociedad Española de Cerámica y Vidrio 42, no. 6 (December 30, 2003): 389–96. http://dx.doi.org/10.3989/cyv.2003.v42.i6.627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Hellali, Taoufik, Afifa Hafidh, Noureddine Etteyeb, Fathi Touati, Ahmed Hichem Hamzaoui, and Sayda Somrani. "New silica-based hybrid materials (Nouveaux matériaux hybrides à base de silicium)." Phosphorus, Sulfur, and Silicon and the Related Elements 192, no. 9 (July 5, 2017): 1018–26. http://dx.doi.org/10.1080/10426507.2017.1315423.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Hopmann, C., S. Stender, N. Magura, M. Emonts, K. Fischer, and D. Schneider. "Methoden zur produktfunktionsgeregelten Fertigung von Composite-Bauteilen/Methods for product function controlled manufacturing of composite components – Hybrid component manufacturing with chained forward control loop." wt Werkstattstechnik online 109, no. 10 (2019): 785–92. http://dx.doi.org/10.37544/1436-4980-2019-10-89.

Full text
Abstract:
Im Projekt „iComposite4.0“ wurde ein Produktionssystem zur Fertigung hybrider FVK-Bauteile entwickelt. Durch den Multimaterialansatz werden kostengünstige Materialien lastspezifisch eingesetzt. Zudem wird der mehrstufige Prozess genutzt, um während der Produktion durch eine Ausgleichsfunktion eine Anpassung der mechanischen Bauteileigenschaften umzusetzen. Kernaspekte hierbei liegen in der Integration von Messtechnik, Modellierungen und Entscheidungsalgorithmen in das Produktionssystem. &nbsp; In the iComposite4.0 project, a production system for the manufacture of hybrid FRP components was developed. The multi-material approach allows cost-effective materials to be used for load specific designs. Moreover, the multi-stage process is used to establish an control-algorithm to compensate fluctuations of the mechanical properties of the final part during production. Core aspects are the integration of measurement technology, modelling and decision algorithms into the production system.
APA, Harvard, Vancouver, ISO, and other styles
31

Katayama, Mitsuhiro, Shin-ichi Honda, Takashi Ikuno, Kuei-Yi Lee, Masaru Kishida, Yuya Murata, and Kenjiro Oura. "Synthesis of Nanostructured Hybrid between Carbon Nanotube and Inorganic Material towards Nanodevice Application." e-Journal of Surface Science and Nanotechnology 2 (2004): 244–55. http://dx.doi.org/10.1380/ejssnt.2004.244.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Abeln, Björn, and Eva Preckwinkel. "Entwicklung hybrider Stahl-Glas-Träger." Stahlbau 80, no. 4 (April 2011): 218–25. http://dx.doi.org/10.1002/stab.201101410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Bednářová, Dana. "Specifika a perspektivy výuky odborného jazyka v digitální současnosti." CASALC Review 10, no. 1 (September 20, 2020): 89. http://dx.doi.org/10.5817/casalc2020-1-7.

Full text
Abstract:
Příspěvek se zabývá specifiky výuky cizích jazyků v terciární sféře a přibližuje změny a posuny, k nimž dochází v souvislosti s implementací digitálních technologií, které vnášejí zcela nové dimenze do výuky odborného ekonomického jazyka. Změny se týkají nejen obsahu a forem výuky, ale i role vyučujícího a postavení nové generace posluchačů, tvorby výukových materiálů, způsobů hodnocení dosažené cizojazyčné kompetence a dalších aspektů výuky cizích jazyků.Autorka představuje tzv. hybridní koncept výuky odborného cizího jazyka, který umožňuje skloubit tradičnější formy výuky s využitím komponent e-learningu a m-learningu jak při prezenční výuce, tak i při řízeném samostudiu. Na příkladu odborné němčiny pro obor cestovní ruch popisuje možné využití digitálních médií a technologií ve vztahu k autentičnosti a interaktivnosti výuky, možnostem její vnitřní diferenciace a mnoha dalším aspektům osvojování odborného jazyka.
APA, Harvard, Vancouver, ISO, and other styles
34

Benito, P., F. M. Labajos, P. Moreno, and W. Jones. "Preparación de un nuevo material híbrido orgánico/inorgánico mediante la intercalación de colina en bronce de molibdeno." Boletín de la Sociedad Española de Cerámica y Vidrio 43, no. 2 (April 30, 2004): 426–28. http://dx.doi.org/10.3989/cyv.2004.v43.i2.559.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Thakre, Yogendra Singh, and Prof Amit Kaimkuriya. "Analysis of CNT Based Hybrid Composite Plate Using Material of Mechanics Approach and Fem." International Journal of Trend in Scientific Research and Development Volume-2, Issue-6 (October 31, 2018): 1204–10. http://dx.doi.org/10.31142/ijtsrd18857.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Renčo, Marek, Nikoletta Ntalli, and Trifone D’Addabbo. "Short-Time Impact of Soil Amendments with Medicago Plant Materials on Soil Nematofauna." Plants 10, no. 1 (January 12, 2021): 145. http://dx.doi.org/10.3390/plants10010145.

Full text
Abstract:
Soil amendments with plant materials from Medicago species are widely acknowledged for a suppressive effect on plant-parasitic nematodes but their impact on beneficial components of soil nematofauna is still unknown. A study on potted tomato was carried out to investigate the short-time effects on the overall nematofauna of dry biomasses from six different Medicago species, i.e., M. sativa, M. heyniana, M. hybrida, M. lupulina, M. murex and M. truncatula, incorporated to natural soil at 10, 20, or 40 g kg−1 soil rates. All amendments resulted in a significant decrease of the total nematofauna biomass, whereas total abundance was significantly reduced only by M. heyniana, M. hybrida, and M. lupulina biomasses. Almost all the Medicago amendments significantly reduced the relative abundance of plant-parasites and root fungal feeders. All amendments significantly increased the abundance of bacterivores, whereas fungivores significantly increased only in soil amended with M. heyniana, M. lupulina and M. sativa plant materials. Mesorhabditis and Rhabditis were the most abundant genera of bacterivores, whereas Aphelenchoides and Aphelenchus prevailed among the fungivores. Predators were poorly influenced by all the tested Medicago biomasses, whereas the abundance of omnivores was negatively affected by M. heyniana and M. lupulina. Values of the Maturity Index and Sum Maturity Index were reduced by treatments with M. heyniana, M. hybrida, M. lupulina and M. sativa plant materials, whereas most of the tested amendments decreased values of the Channel Index while increasing those of the Enrichment Index. Enrichment and bacterivore footprints raised following soil addition with Medicago biomasses, whereas composite and fungivore footprints were significantly reduced. According to their overall positive effects on soil nematofauna, amendments with Medicago plant materials or their formulated derivatives could represent an additional tool for a sustainable management of plant-parasitic nematodes.
APA, Harvard, Vancouver, ISO, and other styles
37

Seifarth, C., R. Nachreiner, S. Hammer, Jörg Hildebrand, J. P. Bergmann, M. Layher, A. Hopf, et al. "Hybride additive Multimaterialbearbeitung/Hybrid additive Multi Material Processing – High-resolution hybrid additive Multimaterial production of individualized products." wt Werkstattstechnik online 109, no. 06 (2019): 417–22. http://dx.doi.org/10.37544/1436-4980-2019-06-19.

Full text
Abstract:
Das Ziel von HyAdd3D ist es, mit neuer Anlagentechnik komplexe Bauteile additiv zu fertigen und gleichzeitig den Anforderungen einer Multimaterialfertigung gerecht zu werden. Das Projekt umfasst die Entwicklung einer hybriden Verfahrenslösung, welche in der Lage ist, neue Materialien mit funktionalen Zusatzstoffen zu verarbeiten. Der Beitrag beschreibt den HyAdd3D-Ansatz und beleuchtet den aktuellen Projektstand. Abschließend werden die aktuellen Ergebnisse zusammengefasst und ein Ausblick auf die folgenden Entwicklungsschritte gegeben. &nbsp; The aim of HyAdd3D is to create complex additive manufactured components with novel equipment technology whilst simultaneously fulfilling the requirements of the multi-material manufacturing process. The project engages in developing a hybrid procedure solution that is able to process new materials with functional additives. This article describes the HyAdd3D approach and examines the current project status. All relevant findings are summarized to conclude and further developing measures are explained.
APA, Harvard, Vancouver, ISO, and other styles
38

Ryu, Jang Wi, Sang Youl Kim, and Yong Ki Kim. "Determination of Optic Axis Distribution of a Hybridly Aligned Discotic Material for Wide-view Film." Journal of the Korean Physical Society 57, no. 2 (August 13, 2010): 233–39. http://dx.doi.org/10.3938/jkps.57.233.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Behrens, B. A., M. Stonis, J. Langner, J. Knust, and J. Ross. "Umformsimulation und -versuch von gelöteten Rohren aus Stahl und Aluminium/Hydroforming of Tailored Hybrid Tubes." wt Werkstattstechnik online 108, no. 05 (2018): 371–75. http://dx.doi.org/10.37544/1436-4980-2018-05-97.

Full text
Abstract:
Die Fügestelle ist der schadensanfälligste Bereich an einem hybriden Halbzeug in der Innenhochdruckumformung. In realen Prozessen würde daher eine Umformung an der Fügestelle verhindert werden, um einer Schädigung vorzubeugen. Eine bessere Kenntnis des Umformverhaltens trägt dazu bei, den Aufwand bei der Auslegung zu reduzieren. Zu diesem Zweck sollen in dieser Studie die Umformeignung der Werkstoffpartner simulativ und die Umformeigenschaften der Fügestelle des hybriden Stahl-Aluminium-Halbzeug. &nbsp; The joint is the weak point at a hybrid metal semifinished product in tube hydroforming. In real forming processes, a deformation at the joint would be prevented in order to avoid failure. A better knowledge of the forming behavior enables to reduce the effort in process design. Thus, this study investigates in hybrid material combinations and the forming behavior of the joint area regarding their suitability for tube hydroforming.
APA, Harvard, Vancouver, ISO, and other styles
40

Cristina, Șeremet Oana, Olaru Ot, Ilie Mihaela, Negreș Simona, and Bălălău D. "Phytotoxicity Assessment of Certain Phytochemical Products Containing Pyrrolizidine Alkaloids." Acta Medica Marisiensis 59, no. 5 (October 1, 2013): 250–53. http://dx.doi.org/10.2478/amma-2013-0057.

Full text
Abstract:
AbstractIntroduction: Tussilago farfara (coltsfoot), Petasites hybridus (common butterbur), Senecio vernalis (eastern groundsel) and Symphytum officinale (comfrey) are species traditionally used in phytotherapy that besides the therapeutic compounds contain toxic pyrrolizidine alkaloids (PAs). The aim of the paper is to determine the total PAs content and the phytotoxicity of the above species. Material and methods: The quantitative determination of pyrrolizidine alkaloids is based on the stoichiometric reaction of protonated alkaloids with methyl orange. In acidic conditions the dye is released from the complex and its color is assessed spectrophotometrically using a linear regression curve of senecionine as a standard. The phytotoxicity was assessed by Triticum bioassay that studies the effect of the extracts (0.001-5.00%, w/v) upon root elongation (inhibitory concentration - IC50) and on the karyokinetic film. Results: The highest amount of total PAs was found in Senecio vernalis (654.8 ± 35.96 μg/g dry plant) and the lowest in Petasites hybridus. The lowest IC50 was found for Tussilago farfara followed by Petasites hybridus, Senecio vernalis, and Symphytum officinale. The results were supported by microscopic examination. Conclusions: The results of the spectrophotometric assay are consistent with the ones found in the literature. All extracts inhibited the elongation of the main root of wheat caryopses, however, no correlation between phytotoxicity and the PAs concentration could be emphasized
APA, Harvard, Vancouver, ISO, and other styles
41

Kulikov, G. M., E. Carrera, and S. V. Plotnikova. "Hybrid-Mixed Quadrilateral Element for Laminated Plates Composed of Functionally Graded Materials." Advanced Materials & Technologies, no. 1 (2017): 044–55. http://dx.doi.org/10.17277/amt.2017.01.pp.044-055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Téllez, L., F. Rubio, R. Peña-Alonso, and J. Rubio. "Seguimiento por espectroscopia infrarroja (FT-IR) de la copolimerización de TEOS (tetraetilortosilicato) y PDMS (polidimetilsiloxano) en presencia de tbt (tetrabutiltitanio)." Boletín de la Sociedad Española de Cerámica y Vidrio 43, no. 5 (October 30, 2004): 883–90. http://dx.doi.org/10.3989/cyv.2004.v43.i5.417.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Sugimoto, Hideki, Ken Imamura, Kazuki Sakami, Katsuhiro Inomata, and Eiji Nakanishi. "Transparent Acryl‐Alumina Nano‐Hybrid Materials with Low Coefficient of Thermal Expansion." Sen'i Gakkaishi 71, no. 11 (2015): 333–38. http://dx.doi.org/10.2115/fiber.71.333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Maceček, Jaroslav, Bedřich Staňka, and Petr Konvička. "Hybrid short-wire ERCP technique, five years of experience." Gastroenterologie a hepatologie 75, no. 3 (June 30, 2021): 200–206. http://dx.doi.org/10.48095/ccgh2021200.

Full text
Abstract:
Backgrounds: The aim of this work is to present the novel hybrid endoscopic retrograde cholangiopancreatography (ERCP) technique using short guidewires and accessories designed for long and short systems. The technique is based on the internal locking capability of the short guidewire, assistant wire control and the possibility of targeting the wire by a physician. Material and methods: ERCPs were performed with Olympus duodenoscopes, using a short guidewire (260–270 cm) and accessories designed for short- and long-wire systems. The speed of deployment of the accessories and incidence of post-ERCP pancreatitis (PEP) when using the short-wire hybrid technique were compared with the same parameters when using a long-wire system. The success of cannulations, the percentage of bleeding and cholangitis were monitored. Results: From 2016 to 2020, a total number of 1,506 ERCPs were done. Hybrid technique was used in 58.2% (2017), 88.5% (2018), 91.3% (2019) and 98.5% (2020) of the procedures. The cannulation success rate was 94.73%. The average accessory insertion times through the working channel were 15 s (cv = 0.12, σ = 1.91) when using a short guidewire and a V-system, 31 s (cv = 0.08, σ = 2.67) when using a long guidewire and a V-system and 55 s (cv = 0.06, σ = 3.34) when using a long guidewire and an endoscope without a locking device. The rate of complications was 5.26% and none of them was severe. A lower incidence of PEP with a short guidewire than with a long one (1% vs. 4%, P = 0.033) was demonstrated. Conclusion: Our retrospective analysis of the ERCP hybrid technique highlights faster deployment of accessories and a lower PEP rate compared to the long-wire method. We noticed low bleeding and infectious complications apparently due to easy and quick handling of the short guidewire.
APA, Harvard, Vancouver, ISO, and other styles
45

Bach, Fr W., D. Bormann, M. Rodmann, and H. Haverkamp. "Hybrides Walzen am Beispiel von Titan-Aluminium-Verbunden." Materialwissenschaft und Werkstofftechnik 39, no. 9 (September 2008): 588–93. http://dx.doi.org/10.1002/mawe.200800328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Gupta, Ravi, Rahul O. Vaishya, Dr R. S. Walia Dr. R.S Walia, and Dr P. K. Kalra Dr. P.K Kalra. "Experimental Study of Process Parameters On Material Removal Mechanism in Hybrid Abrasive Flow Machining Process (AFM)." International Journal of Scientific Research 2, no. 6 (June 1, 2012): 234–37. http://dx.doi.org/10.15373/22778179/june2013/75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Cuentas-Gallegos, A. K., M. R. Palacín, M. T. Colomer, J. R. Jurado, and P. Gómez-Romero. "Estudios de materiales de cátodos híbridos y ánodos vítreos. Caracterización en celdas de ion litio." Boletín de la Sociedad Española de Cerámica y Vidrio 41, no. 1 (February 28, 2002): 115–21. http://dx.doi.org/10.3989/cyv.2002.v41.i1.708.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Guenet, J. M. "Nouveaux types de matériaux hybrides : polymère/système auto-assemblé." Matériaux & Techniques 98, no. 5 (2011): 329–38. http://dx.doi.org/10.1051/mattech/2010121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Plugatar, Y. V., Z. K. Klimenko, S. A. Plugatar, V. K. Zykova, L. M. Aleksandrova, I. V. Ulanovskaya, N. V. Zubkova, N. V. Smykova, Z. P. Andryushenkova, and I. N. Kravchenko. "Development of flower-ornamental crops collections of the Nikita Botanical Gardens." Plant Biology and Horticulture: theory, innovation, no. 156 (December 31, 2020): 7–16. http://dx.doi.org/10.36305/2712-7788-2020-3-156-7-16.

Full text
Abstract:
Modern collections of flower-ornamental crops of the Nikitsky Botanical Gardens (NBG) are formed as a result of long-term introduction and breeding researches begun, respectively, for Rosa L. in 1812 and 1824., for Syringa L. in 1813 and 1941, for Iris × hybrida hort. in 1812 and 1986, for Hemerocallis × hybrida hort. In 1812 and 1995, for Clematis L. in 1817 and 1953, for Tulipa L. in 1812 and 1960, for Canna × hybrida hort. In 1812 and 1948, for Chrysanthemum × morifolium Ramat. in 1812 and 1939. Each collection currently includes cultivars of both foreign and domestic selection, including those created in the NBG. The total amount of the collections is 2406 species, cultivars and forms. The collections of roses, clematises, cannas and chrysanthemums are the largest in the Russian Federation. The Rosa collection includes 35 garden groups from 36 existing ones, Syringa – 6 from 7 groups of flower coloring, Iris – all 6 existing garden groups, Clematis – 14 garden groups, Tulipa – 14 garden classes from 15, Canna – both existing garden groups, Chrysanthemum – all 11 classes of this crop. Thus, the formed collections quite fully reflect the created varietal diversity of each of these crops and provide a full material for further breeding and identification of adapted assortment for landscaping in the South of Russia.
APA, Harvard, Vancouver, ISO, and other styles
50

Langer, Lukas, Matthias Schmitt, Georg Schlick, and Johannes Schilp. "Hybride Fertigung mittels Laser-Strahlschmelzen/Hybrid manufacturing by laser-based powder bed fusion." wt Werkstattstechnik online 111, no. 06 (2021): 363–67. http://dx.doi.org/10.37544/1436-4980-2021-06-7.

Full text
Abstract:
Die additive Fertigung ermöglicht komplexe Geometrien und individualisierte Bauteile. Die hohen Material- und Fertigungskosten können ein Hindernis für einen wirtschaftlichen Einsatz sein. In der hybriden additiven Fertigung werden die Vorteile konventioneller sowie additiver Fertigungsverfahren kombiniert. Für eine weitere Steigerung der Wirtschaftlichkeit und Effizienz werden nichtwertschöpfende Schritte der Prozesskette identifiziert und Automatisierungsansätze entwickelt. &nbsp; Additive manufacturing enables complex geometries and individualized components. However, high material and manufacturing costs can be a hindrance for economical use. Hybrid additive manufacturing combines the advantages of conventional with additive manufacturing processes. For a further increase in profitability and efficiency, non-value-adding steps in the process chain are identified and automation approaches developed.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Hybridní materiál' for other source types:
Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography