Log in

Relevant bibliographies by topics / Hygienic aspects of Ceramic industries / Journal articles

To see the other types of publications on this topic, follow the link: Hygienic aspects of Ceramic industries.

Journal articles on the topic 'Hygienic aspects of Ceramic industries'

Author: Grafiati

Published: 4 June 2021

Last updated: 28 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Hygienic aspects of Ceramic industries.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Fonseca, Cristina Farias da, Tânia Lúcia Montenegro Stamford, Samara Alvachian Cardoso Andrade, Evandro Leite de Souza, and Celiane Gomes Maia da Silva. "Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP) plan in lobster processing industries." Food Science and Technology 33, no. 1 (2013): 127–36. http://dx.doi.org/10.1590/s0101-20612013005000019.

Full text

Abstract:

This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (

APA, Harvard, Vancouver, ISO, and other styles

2

MD Bellal, Hossain, and Mia Ahmed. "Effectiveness of the Food Safety Aspects in Small Medium Entrepreneur’s Bakery Food Technology of Dhaka Metropolitan City." DIU Journal of Health and Life Sciences 1, no. 01 & 02 (2014): 37–44. http://dx.doi.org/10.36481/diuhls.v01i1-2.j6hbwr63.

Full text

Abstract:

Bakery and confectionary products are dominated by small cottage industries in Bangladesh. The SMEs sub-sector plays an increasingly important role in the technology assimilation and dissemination in economic development of Bangladesh. Resources such as information, materials, technology, industry, and finance are too limited for Bangladeshi SMEs food sectors. 86% bakeries are small and 14% medium out of 50 selected samples at Dhaka Metropolitan city was investigated. Most of the entrepreneurs invested small amount of finance i.e., 1- 15 million taka. Large number of respondents i.e. 56% baker

APA, Harvard, Vancouver, ISO, and other styles

3

Hossain, MD Bellal, and Ahmed Mia. "Effectiveness of the Food Safety Aspects in Small Medium Entrepreneur’s Bakery Food Technology of Dhaka Metropolitan City." DIU Journal of Allied Health Sciences 1, no. 01 & 02 (2014): 37–44. https://doi.org/10.36481/diujahs.v01i1-2.j6hbwr63.

Full text

Abstract:

Bakery and confectionary products are dominated by small cottage industries in Bangladesh. The SMEs sub-sector plays an increasingly important role in the technology assimilation and dissemination in economic development of Bangladesh. Resources such as information, materials, technology, industry, and finance are too limited for Bangladeshi SMEs food sectors. 86% bakeries are small and 14% medium out of 50 selected samples at Dhaka Metropolitan city was investigated. Most of the entrepreneurs invested small amount of finance i.e., 1- 15 million taka. Large number of respondents i.e. 56% baker

APA, Harvard, Vancouver, ISO, and other styles

4

MD, Bellal Hossain, and N. Ahmed Mia M. "Effectiveness of the Food Safety Aspects in Small Medium Entrepreneur's Bakery Food Technology of Dhaka Metropolitan City." DIU Journal of Allied Health and Life Sciences 1, no. 2 (2014): 37–44. https://doi.org/10.5281/zenodo.11020648.

Full text

Abstract:

Abstract: Bakery and confectionary products are dominated by small cottage industries in Bangladesh. The SMEs sub-sector plays an increasingly important role in the technology assimilation and dissemination in economic development of Bangladesh. Resources such as information, materials, technology, industry, and finance are too limited for Bangladeshi SMEs food sectors. 86% bakeries are small and 14% medium out of 50 selected samples at Dhaka Metropolitan city was investigated. Most of the entrepreneurs invested small amount of finance i.e., 1- 15 million taka. Large number of respondents i.e.

APA, Harvard, Vancouver, ISO, and other styles

5

Giridhar, Valikala, and Mahankali Sreenath. "Performance of Strength and Modulii Characteristics of Ceramic Waste Aggregate Concrete (CWAC)." Key Engineering Materials 961 (October 11, 2023): 95–105. http://dx.doi.org/10.4028/p-pzbaw9.

Full text

Abstract:

Rapid industrialization in 21st century resulted in emission of both by-products and wastes which are producing at an alarming rate in India. Development cannot be ceased by referring to pollution and waste as justification; instead of it is essential to be decided how to reduce and manage the waste generated near by the industries. One of the solution is waste may be recycled or substituted to replace traditional ingredients in new concrete compositions and benefit to reduce their toxic effects on the environment. The Ceramic Industry is one of the largest industries to manufacture ceramic co

APA, Harvard, Vancouver, ISO, and other styles

6

Ge, Qiang. "Research on the Development Model of Ceramic Cultural and Creative Industry in Jingdezhen." International Journal of Education and Humanities 13, no. 1 (2024): 166–70. http://dx.doi.org/10.54097/mdr8ar19.

Full text

Abstract:

As a representative of the new economy, the cultural and creative industry is one of the most competitive emerging industries in Jingdezhen. However, under the policy background of building Jingdezhen National Ceramic Culture Experimental Zone, Jingdezhen ceramic cultural and creative industry has long-term problems in terms of talents, marketing, channels, scale, brand and other aspects. From the perspective of digital economy, this article puts forward rational suggestions on the above issues, in order to promote the long-term healthy and sustainable development of Jingdezhen's ceramic cultu

APA, Harvard, Vancouver, ISO, and other styles

7

Abdrakhmanov, Nail Kh, Artem V. Fedosov, Alina N. Khamitova, Ilzida I. Badrtdinova, and Gleb L. Matuzov. "Main aspects of vibroacoustic factors assessment." SAFETY OF TECHNOGENIC AND NATURAL SYSTEMS, no. 3 (September 2, 2021): 13–22. http://dx.doi.org/10.23947/2541-9129-2021-3-13-22.

Full text

Abstract:

Introduction. In the age of automation and mechanization of labor, noise and vibration have become the leading dangerous and harmful production factors (DHPF) in various industries and agriculture. In order to reduce the harmful effects of vibroacoustic factors on the human body, first of all, it is necessary to evaluate this factor. The article provides general information on the assessment of working conditions under the influence of vibroacoustic factors. Problem Statement. The aim of this work is to study the main aspects in the assessment of vibroacoustic factors. Theoretical

APA, Harvard, Vancouver, ISO, and other styles

8

Karamova, L. M., V. O. Krasovskiy, N. V. Vlasova, and A. V. Basharova. "Hygienic and clinical functional aspects of health status in phthalate production." Russian Journal of Occupational Health and Industrial Ecology, no. 3 (March 31, 2019): 162–66. http://dx.doi.org/10.31089/1026-9428-2019-3-162-166.

Full text

Abstract:

Introduction. Polyesters of terephthalic acids are major products of organic synthesis, widely used in various industries: for packing materials production, including those for foods and medicaments. Polyesters of terephthalic acids are stable chemicals and highly toxic with cumulative eff ects. Phthalates production requires further studies. Objective. To determine hygienic and clinical functional aspects of workers’ health formation in phthalates production. Materials and methods. Special clinical functional study covered workers who first started work activity in production of terephthalic

APA, Harvard, Vancouver, ISO, and other styles

9

Vasconcelos dos Santos, Antônio Hélton, Walter Mauricio Gallego Medina, Gérsica M. Nogueira Da Silva, Áurea Nascimento Siqueira, and Marianna Siegmund Schultze. "IMPACTOS AMBIENTALES Y GOBERNANZA DE LOS RECURSOS NATURALES EN LA PRODUCCIÓN DE CERÁMICA ROJA." Revista Gestão & Sustentabilidade Ambiental 13, no. 1 (2024): e8669. http://dx.doi.org/10.59306/rgsa.v13e12024e8669.

Full text

Abstract:

The red ceramic industries are the main suppliers of raw materials for civil construction in Brazil. Thus, this article aims to analyze the environmental impacts and governance of this production in the municipality of Paudalho-PE. It becomes extremely important due to the need to understand the relationship between environmental degradation and the various interests of the actors involved in the production process (public, private and civil society), thus contributing to favoring the environmental management of the segment. To this end, field research was carried out in impacted areas, interv

APA, Harvard, Vancouver, ISO, and other styles

10

BANERJEE, CHANDAN, and ASHOK KUMAR RAJPUT. "SOLID WASTE GENERATED FROM CERAMIC/PORCELAIN INSULATORS VERSUS POLYMER/COMPOSITE LONG ROD INSULATORS/SILICON RUBBER INSULATORS: RECYCLING ASPECTS - A COMPREHENSIVE REVIEW." Pollution Research 44, no. 3-4 (2025): 226–30. https://doi.org/10.53550/pr.2025.v44i03-04.012.

Full text

Abstract:

In this comprehensive review, we emphasized to evaluate the comparative analysis regarding recyclability of porcelain or ceramic insulators wastes versus polymeric or composite insulatorsâ€™ wastes, which could be used as raw materials for other industrial activities. Interestingly, many studies reported better efficacy of the porcelain or ceramic insulators as concrete for building materials while polymeric or composite insulators wastes to make raw materials are costly affair and sometimes hazardous to the environment. The insulators made up of ceramic or porcelain has many advantages as com

APA, Harvard, Vancouver, ISO, and other styles

11

Antoninova, Natalia, Lyubov Shubina, Artem Sobenin, and Albert Usmanov. "Modern aspects of disturbed land reclamation." E3S Web of Conferences 192 (2020): 03019. http://dx.doi.org/10.1051/e3sconf/202019203019.

Full text

Abstract:

The urgency of solving environmental problems of disturbed territories is obvious in connection with the accumulation of a huge amount of waste from mining and metallurgical industries, deposited in slime and tailings dumps, overburden dumps, slags and substandard raw materials. Environmental rehabilitation of such territories is determined by both the possible long-term existence of such objects and the prospect of their reuse. In this regard, the use of new geosynthetic materials, the most promising and effective method of restoring ecological characteristics of the areas of violations of la

APA, Harvard, Vancouver, ISO, and other styles

12

Peláiz-Barranco, A., and Y. González-Abreu. "Ferroelectric ceramic materials of the Aurivillius family." Journal of Advanced Dielectrics 03, no. 04 (2013): 1330003. http://dx.doi.org/10.1142/s2010135x1330003x.

Full text

Abstract:

Ferroelectric ceramics are important materials with a wide range of industrial and commercial applications. Since the discovery of the phenomenon of ferroelectricity, they have been the heart and soul of several multibillion dollar industries, ranging from high-dielectric-permittivity capacitors to developments in piezoelectric transducers, pyroelectric sensors, medical diagnostic transducers, electro-optical devices, etc. Materials based on barium titanate and lead zirconate titanate have dominated the field throughout their history. Actually, the ferroelectric ceramics from the Aurivillius f

APA, Harvard, Vancouver, ISO, and other styles

13

Sukhova, Anna V., Inna V. Lapko, and Elena A. Preobrazhenskaya. "Hygienic principles of healthy nutrition in the able-bodied population (literature review)." Hygiene and sanitation 103, no. 12 (2024): 1521–27. https://doi.org/10.47470/0016-9900-2024-103-12-1521-1527.

Full text

Abstract:

The role of nutrition in shaping the health in the Russian population, the prevention of socially significant non-communicable diseases, is crucial for maintaining active and working longevity and maintaining the quality of life. A literary review of modern hygienic aspects of healthy nutrition in the able-bodied population using the Russian RSCI and elibrary databases has been conducted. The review presents the hygienic characteristics of the actual nutrition and nutritional status of various occupational groups of the able-bodied population, examines the peculiarities of the state of health

APA, Harvard, Vancouver, ISO, and other styles

14

Wei, Tanyong, Qiulin Tan, Tao Luo, et al. "Modeling, simulation and coupling experiment for integrated passive wireless multi-parameters ceramic sensor." Sensor Review 36, no. 1 (2016): 98–106. http://dx.doi.org/10.1108/sr-03-2015-0045.

Full text

Abstract:

Purpose – The purpose of this paper is to propose a pressure-, temperature- and acceleration-sensitive structure-integrated inductor-capacitor (LC) resonant ceramic sensor to fulfill the measurement of multi-parameters, such as the measurement of pressure, temperature and acceleration, simultaneously in automotive, aerospace and aeronautics industries. Design/methodology/approach – The ceramic-based multi-parameter sensor was composed of three LC tanks, which have their resonant frequencies sensitive to pressure, temperature and acceleration separately. Two aspects from the specific sensitive

APA, Harvard, Vancouver, ISO, and other styles

15

Candeias, Carla, Isaac Santos, and Fernando Rocha. "Characterization and Suitability for Ceramics Production of Clays from Bustos, Portugal." Minerals 15, no. 5 (2025): 503. https://doi.org/10.3390/min15050503.

Full text

Abstract:

Clays are fundamental raw materials in the ceramics industry due to their plasticity, mineralogical composition, and thermal behavior. This study characterizes four clay samples from Bustos (Portugal), aiming to assess their suitability for ceramic applications through granulometric, geochemical, mineralogical, and technological assays, looking at aspects such as their plasticity and sintering behavior. A textural analysis of the samples revealed distinct granulometric profiles, being dominated by silty–clayey fractions and low amounts of coarse particles, indicating high plasticity potential.

APA, Harvard, Vancouver, ISO, and other styles

16

Geringer, J. W., Y. Katoh, S. Gonczy, et al. "ASME Code Rules and ASTM Standards Integration for Ceramic Composite Core Materials and Components¹." Journal of Physics: Conference Series 2048, no. 1 (2021): 012020. http://dx.doi.org/10.1088/1742-6596/2048/1/012020.

Full text

Abstract:

Abstract Fiber-reinforced ceramic matrix composites have many desirable properties for high-temperature nuclear applications, including excellent thermal and mechanical properties and reasonable to outstanding radiation resistance. Over the last 20 years, the use of ceramic composite materials has already expanded in many commercial nonnuclear industries as fabrication and application technologies mature. The new ASME design and construction rules under Section III, Subsection HH, Subpart B lay out the requirements and criteria for materials, design, machining and installation, inspection, exa

APA, Harvard, Vancouver, ISO, and other styles

17

Mousharraf, Adnan, Md Sazzad Hossain, and Md Fakhrul Islam. "Potential of Locally Available Clay as Raw Material for Traditional-Ceramic Manufacturing Industries." Journal of Chemical Engineering 26 (March 24, 2012): 34–37. http://dx.doi.org/10.3329/jce.v26i1.10179.

Full text

Abstract:

The traditional white-ware manufacturing industries in Bangladesh use clay as the prime raw material which is mostly imported from abroad. The main reasons are the lack of proper clay refining technolo gy in the country and in some part the unsuitable chemical and structural composition of the locally available naturally occurring clays. Moreover, particle size has also been identified as a major challenge in processing of naturally available clay. These two vital aspects affect plasticity and strength of clay during their processing. The composition and particle size of locally available clay

APA, Harvard, Vancouver, ISO, and other styles

18

HIDALGO, Hanilyn A. "GREEN FARM EXPERIENCE." ICCD 3, no. 1 (2021): 6–8. http://dx.doi.org/10.33068/iccd.vol3.iss1.287.

Full text

Abstract:

Tourism has become one of the highest contributors to the world economy but is also among the industries that were seriously affected by the Covid-19 outbreak. This pandemic has created a way to refocus how tourism operates. The way people will treat their next travel will be much different from before. Tourism may be transformed into a sustainable experience with emphasis not only on economic and social aspects but on environmental contributions as well. As the new norm in tourism is about to emerge, there will be conscious acts that will result in more hygienic and open destinations, more ca

APA, Harvard, Vancouver, ISO, and other styles

19

Panigrahi, Ramai Ranjan, Ramanuj Kumar, Ashok Kumar Sahoo, and Amlana Panda. "Machining of high temperature heat resistant super alloys- a concise review on cooling aspects." IOP Conference Series: Materials Science and Engineering 1258, no. 1 (2022): 012034. http://dx.doi.org/10.1088/1757-899x/1258/1/012034.

Full text

Abstract:

Analyzing and comprehending cutting process mechanisms is a crucial step in creating a cost-effective, long-lasting, and safe machining process.In modern manufacturing, it is very challenging to achieve a high surface finish product with high dimensional accuracy. To reduce the high production cost as well as for the sustainable manufacturing selection of both cutting tool materials and cutting environments is necessary. Nowadays high-temperature alloys are in very demand in industries like power generation, gas turbines, and chemical processing. Superalloys are recognised as a significant pro

APA, Harvard, Vancouver, ISO, and other styles

20

Montayev, Sarsenbek, Karzhaubai Dosov, Nurgul Adilova, Ainur Montayeva, and Maira Almagambetova. "Technology of granulated ceramic aggregate for concrete based on clay of Atyrau deposit of Western Kazakhstan." Architectural Studies 10, no. 2 (2024): 162–71. https://doi.org/10.56318/as/2.2024.162.

Full text

Abstract:

The purpose of this study was to investigate the technology of granular ceramic aggregate based on clay of Atyrau deposit, with a focus on improving the mechanical and thermal properties of concrete to achieve best efficiency and sustainability in construction. The methods employed in this study included chemical analysis, X-ray phase analysis, electron microscopy. Using these methods, the physical-mechanical and chemical-mineralogical characteristics of the ceramic aggregate were determined. The study presents solutions to the problem of providing the construction industry of the West Kazakhs

APA, Harvard, Vancouver, ISO, and other styles

21

Mohankumar, V., Mani Kanthababu, and R. Raveendran. "Review on Machining Aspects in Metal Matrix and Ceramic Matrix Composites Using Abrasive Waterjet." Applied Mechanics and Materials 766-767 (June 2015): 643–48. http://dx.doi.org/10.4028/www.scientific.net/amm.766-767.643.

Full text

Abstract:

Abrasive waterjet machining (AWJM) is one of the non-traditional machining processes used for machining hard and difficult materials including metal matrix composites (MMCs) and ceramic matrix composites (CMCs). MMCs and CMCs are widely used in the industries such as automobile, aerospace, defense, etc. In AWJM, the material is removed by a narrow stream of high pressure water along with abrasive particles. This work, reviews the research work carried out on the machining aspects of MMCs and CMCs using AJWM. Most of the research work in MMCs is carried out on aluminum based matrix reinforced w

APA, Harvard, Vancouver, ISO, and other styles

22

Mahmood, Muhammad, Alexandra Bănică, Carmen Ristoscu, Nicu Becherescu, and Ion Mihăilescu. "Laser Coatings via State-of-the-Art Additive Manufacturing: A Review." Coatings 11, no. 3 (2021): 296. http://dx.doi.org/10.3390/coatings11030296.

Full text

Abstract:

Ceramics and ceramic-reinforced metal matrix composites (CMMCs) demonstrate high wear resistance, excellent chemical inertness, and exceptional properties at elevated temperatures. These characteristics are suitable for their utilization in biomedical, aerospace, electronics, and other high-end engineering industries. The aforementioned performances make them difficult to fabricate via conventional manufacturing methods, requiring high costs and energy consumption. To overcome these issues, laser additive manufacturing (LAM) techniques, with high-power laser beams, were developed and extensive

APA, Harvard, Vancouver, ISO, and other styles

23

Esosuakpo, Sunday. "Restructuring Ceramic Production for Wealth Creation, Security and Sustainable Development through the Construction of Kick Wheel." UJAH: Unizik Journal of Arts and Humanities 21, no. 4 (2021): 118–34. http://dx.doi.org/10.4314/ujah.v21i4.7.

Full text

Abstract:

Right from the time of independence, Nigeria has adopted different restructuring methods in order to create wealth that will improve her economy, ensure security and enhance sustainable development. In doing this, different aspects of human and natural resources have been explored. But it appears that ceramics which is a branch of industrial art and an aspect of the people’s culture has not been considered even when the major raw material (clay) required is abundantly available as the oil. Perhaps, its non-consideration could be due to the crude tools used which do not give room for mass produ

APA, Harvard, Vancouver, ISO, and other styles

24

Mir, Aqib Hussain, and SN Ahmad. "A study on fabrication of silicon nitride-based advanced ceramic composite materials via spark plasma sintering." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235, no. 8 (2021): 1739–56. http://dx.doi.org/10.1177/14644207211013560.

Full text

Abstract:

The present study provides an overview of the fabrication of silicon nitride (Si3N4)-based advanced ceramic materials using spark plasma sintering. Being an excellent engineering ceramic material, silicon nitride is extensively being used in tribological components, aerospace, and automotive industries due to its unique blend of thermo-mechanical, tribological, and chemical properties. The selection of the sintering process, as well as sintering aids, strongly affects the properties of silicon nitride ceramics. Several conventional sintering techniques have been utilized in the past to optimiz

APA, Harvard, Vancouver, ISO, and other styles

25

Mllller, Arno, Jorge Luiz S. Barcelos, and Lavinel G. IONESCU. "USE OF SURFACTANTS ADDED TO REFRACTORY SLURRY IN PRECISION FOUNDRY AND INVESTMENT CASTINGS WITH ALUMINUM." SOUTHERN BRAZILIAN JOURNAL OF CHEMISTRY 2, no. 2 (1994): 41–54. http://dx.doi.org/10.48141/sbjchem.v2.n2.1994.43_1994.pdf.

Full text

Abstract:

The investment casting process, involving wax models invested with clays to give ceramic molds from which metal castings are made, is characterized by the obtainment of parts of high metallurgic quality, especially as far as dimensional aspects the complexity of design and surface finishings are concerned. The high-precision parts have a wide application in the electronic, aeronautical, biomedical, textile, and food industries. Twenty-one different surfactants, added to refractive zirconite slurry, were tested for their efficiency in obtaining wetting and adherence to the surface of the wax an

APA, Harvard, Vancouver, ISO, and other styles

26

Alderwish, Ahmed M., and Fayad A. Alderwish. "Environmental Aspects of the Accelerated Urbanization in Sana’a, Yemen." Sultan Qaboos University Journal for Science [SQUJS] 16 (December 1, 2011): 1. http://dx.doi.org/10.24200/squjs.vol16iss0pp1-12.

Full text

Abstract:

From an environmental viewpoint, the prevailing health problems must be a “first priority” in all major development projects. Public water supply provides only 36% of domestic water. Disinfection of public water supply from the south well field is essential to avoid health problems. About 60% of the drinking water sold by ‘hygienic’ stations is of questionable quality. Expansion and upgrading in hospitals, pharmacies and industries (waste producers) will have an immediate impact on the amount of hazardous waste that will have to be disposed of. To achieve a sustainable urban development and to

APA, Harvard, Vancouver, ISO, and other styles

27

Nayak, Gargi Shankar, Heinz Palkowski, and Adele Carradò. "Precepts for Designing Sandwich Materials." Journal of Experimental and Theoretical Analyses 2, no. 1 (2024): 31–45. http://dx.doi.org/10.3390/jeta2010003.

Full text

Abstract:

The demand for innovative materials has been a significant driving force in material development in a variety of industries, including automotive, structural, and biomedical. Even though a tremendous amount of research has already been conducted on metallic, polymeric, and ceramic materials, they all have distinct drawbacks when used as mono-materials. This gave rise to the development of nature-inspired sandwich-structured composite materials. The combination of strong metallic skins with soft polymeric cores provides several advantages over mono-materials in terms of weight, damping, and mec

APA, Harvard, Vancouver, ISO, and other styles

28

Huma, Saeeda, Syed Anwaar Hussain Shah, Abdul Noman Razzaq, et al. "The Comprehensive Features, Current Aspects, Synthesis, Characterization and Role of Nanomaterials in Modern Industries through Nanotechnology." Scholars Bulletin 9, no. 10 (2023): 126–32. http://dx.doi.org/10.36348/sb.2023.v09i10.001.

Full text

Abstract:

Nanotechnology has attained the valuable significant attention throughout time because to its compelling and pioneering uses in the forthcoming industrial age, particularly in relation to nanomaterials. Nanomaterials find applications in several areas, including agriculture, biomedicine, electronics, energy, transportation, communications, cosmetics, coatings, materials, and mechanical engineering. Numerous techniques have been used to fabricate nanoparticles (NPs) with precise control over their form, size, dimensions, and structure. There may be exist two primary methodologies for the synthe

APA, Harvard, Vancouver, ISO, and other styles

29

Godoy, Letícia Hirata, Diego de Souza Sardinha, and Maria Margarita Torres Moreno. "Major and trace elements redistribution in weathered claystones from the Corumbataí Formation, Paraná Sedimentary Basin, São Paulo, Brazil." Brazilian Journal of Geology 47, no. 4 (2017): 615–32. http://dx.doi.org/10.1590/2317-4889201720170086.

Full text

Abstract:

ABSTRACT: We studied 30 samples from 10 mining fronts of clayish rocks of the Corumbataí Formation, in the region of the Santa Gertrudes Ceramic Pole (São Paulo, Brazil), in order to evaluate the variation of rare earth elements (REE), mineralogy, weathering effects and provenance. The profiles show diagnostic geochemical signatures that are uniform across the Corumbataí Formation samples in the studied region and can be correlated from mine to mine, i.e.: 1) the constant MgO/K2O ratio and the variation of other oxides, which allow the identification of three main groups of samples; 2) similar

APA, Harvard, Vancouver, ISO, and other styles

30

Voronkova, Svetlana V. "ADMINISTRATIVE RULES OF ADMISSION OF MIGRANTS FOR WORK IN DECREED PROFESSIONS." Hygiene and sanitation 96, no. 7 (2019): 646–51. http://dx.doi.org/10.18821/0016-9900-2017-96-7-646-651.

Full text

Abstract:

In the article there are considered questions of legal regulation of the admission of foreign nationals (or individuals without nationality) to work in decreed professions in the Russian Federation. To date migration processes are shown to affect not only the demographic situation in our country, but the level of infectious diseases rates, especially in large cities. The health status of the population depends directly on the literacy level of workers in various industries, especially decreed contingents of high epidemiological risk. It is noted that along with the medical examination of forei

APA, Harvard, Vancouver, ISO, and other styles

31

Aldosari, Fahad, M. A. A. Khan, M. Asad, and F. Djavanroodi. "Finite Element Analysis of PolyLactic Acid (PLA) under Tensile and Compressive Loading." Journal of Physics: Conference Series 2468, no. 1 (2023): 012094. http://dx.doi.org/10.1088/1742-6596/2468/1/012094.

Full text

Abstract:

Abstract Additive manufacturing or 3D-Printing technology is being utilized heavily in recent times, especially in a range of manufacturing industries. Many types and sizes of 3D-printers are being utilized in producing ceramic, metal, or plastic components. This technology is serving society in many aspects, such as minimizing environmental impact, reduction in cost, and even material consumption. Polylactic acid (PLA) is a thermoplastic filament type material used in Fused Deposition Modelling (FDM) 3D printers. In this study, finite element analysis is used to simulate the mechanical behavi

APA, Harvard, Vancouver, ISO, and other styles

32

Kim, Yunjeong. "The Introduction of North China’s Ceramic Culture to 15th Century Joseon and the Influence on Buncheong Ware." Korean Journal of Art History 312 (December 31, 2021): 5–33. http://dx.doi.org/10.31065/kjah.312.202112.001.

Full text

Abstract:

This paper is a study on Korean Buncheong ware in relation to the ceramic culture of North China. The focus on drawing connections between the ceramic industries of Korea and North China expands on views presented in previous scholarship. Research thus far has traditionally ascribed the origin of Buncheong forms and decoration techniques to the influences of inlaid celadon from the late Goryeo Dynasty and the Cizhou ware of the Yuan and Ming Dynasties. The ceramic culture of North China was quickly transmitted to Korea due to the naturalization of the Jurchen people, who took part in founding

APA, Harvard, Vancouver, ISO, and other styles

33

Tangboriboon, Nuchnapa, Sukritchai Teeraroengrit, Pattara Chawhuaymhak, Jirarat Kamonsawas, Sairung Changkhamchom, and Anuvat Sirivat. "Efficient stoneware hand mold for slip casting in natural rubber latex glove preparation." Progress in Rubber, Plastics and Recycling Technology 36, no. 4 (2020): 262–83. http://dx.doi.org/10.1177/1477760619895013.

Full text

Abstract:

Disposal medical gloves are an important product to maintain hygienic conditions, ensuring security for patients and safeguarding against infections. They are used in many fields, such as dental and medical, beauty and cuisine, food and pharmaceutical industries. Presently, aging populations and an emerging middle class in developing countries require medical gloves at a higher volume. Therefore, the demand for medical gloves increases continuously. In this work, two types of hand molds were prepared from stoneware clay and plaster to be used in the natural rubber glove preparation. The cerami

APA, Harvard, Vancouver, ISO, and other styles

34

Klimkina, Kristina V., Inna V. Lapko, and Inessa A. Bogatyreva. "Some aspects of the diagnosis of osteopenic syndrome in workers of vibration-hazardous professions." Hygiene and sanitation 101, no. 12 (2023): 1505–8. http://dx.doi.org/10.47470/0016-9900-2022-101-12-1505-1508.

Full text

Abstract:

Introduction. The adverse effects of both production factors and the labour process affect the bone mineral density, increasing the risk of developing osteopenic syndrome in workers of harmful industries, which is an urgent social and hygienic problem due to the high prevalence and severity of medical and social consequences. Objective. The study of the state of bone tissue in miners whose occupational activities are associated with the impact of vibration (general and local). Materials and methods. For the period 2015-2022, there were examined three hundred twenty mining workers, whose activi

APA, Harvard, Vancouver, ISO, and other styles

35

Das, Anshuman, Smita Padhan, Sudhansu Ranjan Das, Mohammad S. Alsoufi, Ahmed Mohamed Mahmoud Ibrahim, and Ammar Elsheikh. "Performance Assessment and Chip Morphology Evaluation of Austenitic Stainless Steel under Sustainable Machining Conditions." Metals 11, no. 12 (2021): 1931. http://dx.doi.org/10.3390/met11121931.

Full text

Abstract:

Sustainable manufacturing has received great attention in the last few decades for obtaining high quality products with minimal costs and minimal negative impacts on environment. Sustainable machining is one of the main sustainable manufacturing branches, which is concerned with improving environmental conditions, reducing power consumption, and minimizing machining costs. In the current study, the performance of three sustainable machining techniques, namely dry, compressed air cooling, and minimum quantity lubrication, is compared with conventional flood machining during the turning of auste

APA, Harvard, Vancouver, ISO, and other styles

36

Rath, Debabrata, Sumanta Panda, Ankan Mishra, and Kamal Pal. "Particle Swarm Optimization and Machinability Aspects during Turning of Hardened D3 Steel." Journal of Advanced Manufacturing Systems 19, no. 04 (2020): 641–62. http://dx.doi.org/10.1142/s021968672050033x.

Full text

Abstract:

Metal cutting processes are associated with excessive forces, friction and heat generation due to continuous intensive contact between the active cutting tools and the work which degrades the machined surface quality. The hardened tool steel having excellent wear resistance property receives an extensive promotion, investigation and application in the die manufacturing industries. In this research, the machinability of hardened AISI D3 tool steel has been investigated using TiN-coated Al2[Formula: see text](C,N) ceramic tool inserts as per Taguchi’s [Formula: see text] orthogonal design of exp

APA, Harvard, Vancouver, ISO, and other styles

37

Yavorskaya, Liliya, Margarita Izotova, and Olesya Kubankina. "To the Study of the Rural District of the Golden Horde City of Ukek: Archaeological and Archaeozoological Research Results of the Shiroky Buerak Settlement in 2021." Nizhnevolzhskiy Arheologicheskiy Vestnik, no. 2 (December 2023): 300–317. http://dx.doi.org/10.15688/nav.jvolsu.2023.2.15.

Full text

Abstract:

The paper presents the results of archaeological and archaeozoological study of the 2021excavation material from the Shiroky Buerak settlement which is a part of the Golden Horde city of Ukek. The purpose of the study is to reconstruct a part of the economic functions of this settlement in the life support system of a larger town. The excavations revealed three stratigraphic horizons, remains of several service amenities outbuildings and pits. The ceramic complex is mainly represented by fragments of local production vessels: unglazed red-clay, red-brown, and ancient Russian gray-clay. Fragmen

APA, Harvard, Vancouver, ISO, and other styles

38

Kumar, Awinash, and Pradip Lingfa. "Acid-activated Sodium Bentonite and Kaolin Clay: Comparative Study by Physicochemical Properties." Combinatorial Chemistry & High Throughput Screening 23, no. 5 (2020): 433–45. http://dx.doi.org/10.2174/1386207323666200311114349.

Full text

Abstract:

Aim and Objective: This paper aims to reveal the useful industrial aspects of kandite and montmorillonite group of clays using as a catalyst after acid activation. A comparative study of modified characteristics of clay samples has been explored based on industrial requirements. Materials and Methods: In this study sodium bentonite and kaolin clay have been focused. The modified characteristics of clay samples are investigated by characterization methods of FT-IR, XRD, SEM/EDAX, TGA and DSC before and after treated with 4M of Hydrochloric acid. Clay samples were refluxed at 105ºC and calcined

APA, Harvard, Vancouver, ISO, and other styles

39

Mohamed Raif, Diana, Rusmadiah Anwar, and Mohd Khairi Baharom. "Influences of Gestalt Principles in Form-Giving: Industrial ceramics design." Environment-Behaviour Proceedings Journal 7, SI7 (2022): 227–33. http://dx.doi.org/10.21834/ebpj.v7isi7.3787.

Full text

Abstract:

Design thinking is a contemplative longing to change the world by exploiting aesthetics, ethics, and knowledge. The designers of design cognition do not adequately clarify which abstract aspects they ponder with their physical condition as the driving force behind producing, selecting, and developing ideas. This research aims to characterise design semantic representation related to form creation. Two phases of data collection are partitioned in design protocol analysis. This model specifically designs fields for product design ideation to product form design anatomy. This developed model will

APA, Harvard, Vancouver, ISO, and other styles

40

Tang, Enda, Puvasa Ruangchewin, and Pakamas Suwanipa. "The Development and Value of Sanbao Art Village in Jingdezhen China." International Journal of Sociologies and Anthropologies Science Reviews 4, no. 6 (2024): 309–22. http://dx.doi.org/10.60027/ijsasr.2024.4996.

Full text

Abstract:

Background and Aim: This study explores the construction and study value of Sanbao Art Village in Jingdezhen, China, to investigate how this art village promotes regional economic and social development through the power of art and culture. As one of the more mature art villages in China, the development history of Sanbao Art Village and its impact on culture inheritance and innovation play an important role in understanding the rural revitalization and development of cultural industries. This study aims to analyze the development process of Sanbao Art Village and inquire about its cultural, e

APA, Harvard, Vancouver, ISO, and other styles

41

Haldar, Barun, Hillol Joardar, Borhen Louhichi, Naser Abdulrahman Alsaleh, and Adel Alfozan. "A Comparative Machinability Study of SS 304 in Turning under Dry, New Micro-Jet, and Flood Cooling Lubrication Conditions." Lubricants 10, no. 12 (2022): 359. http://dx.doi.org/10.3390/lubricants10120359.

Full text

Abstract:

The main objective of this experimental investigation is to examine favourable machining conditions by utilising fewer resources of machining industries for the techno-economical and ecological benefits. The machining operations are performed in turning SS 304 using coated carbide tool inserts under dry, water-soluble cutting fluid solution in the form of flood cooling and small-quantity lubrication (SQL) conditions by employing a newly formed micro-jet for a comparative classical chips study and analysis. The machining experiments are conducted in turning by a 25 kW precision CNC lathe with a

APA, Harvard, Vancouver, ISO, and other styles

42

Kuzmina, S. V., R. V. Garipova, Z. M. Berhkeeva, and K. K. Yakhin. "Mental health of chemical workers: violation risk factors." Kazan medical journal 101, no. 4 (2020): 550–60. http://dx.doi.org/10.17816/kmj2020-550.

Full text

Abstract:

Aim. To study the structure of psychosocial maladjustment in chemical workers and assess the contribution of industrial and non-industrial risk factors in the formation of mental illness. Methods. It was analysed of hygienic assessment of the leading harmful production factors chemical, physical, factors of severity and intensity of labor. During the periodic medical examination, the mental health status of 1,226 people was examined, with a focus on professional experience, mental hygiene aspects of production factors, as well as individual and personal characteristics of employees. Conf

APA, Harvard, Vancouver, ISO, and other styles

43

Anil, K. C., J. Kumaraswamy, G. V. Prabhushankar, and S. Sahana. "Role of Solid Lubricant and Bauxite Residue on the Tribological Behaviour of Aluminium Hybrid Composites." Tribology in Industry 47, no. 7 (2025): 164–73. https://doi.org/10.24874/ti.1661.04.24.08.

Full text

Abstract:

Aluminium Matrix Composites (AMCs) have acquired popularity due to their advantageous qualities, such as high strength, stiffness, and lightweight nature when compared to other metals. These materials are particularly essential in a range of industries, including automotive and aerospace, due to their remarkable features. Wear, a frequent outcome of two rubbing surfaces in motion, has been scientifically examined. The wear behavior of AMCs reinforced with graphite (Gr) and red mud (RM) particles is the subject of this study. A thin layer of graphite particles protects against direct metal-to-m

APA, Harvard, Vancouver, ISO, and other styles

44

Purnama, Eris Dwi, and Basuki Rakhim Setya Permana. "DESIGN PROTOTYPE ONLINE SHOP DAGING AYAM SEGAR BERBASIS WEBSITE PADA UD. KAZAIN BROILER DI KOTA SERANG." Jurnal Ilmiah Sistem Informasi 3, no. 1 (2023): 1–13. http://dx.doi.org/10.46306/sm.v3i1.24.

Full text

Abstract:

Kazain Broiler is a Fresh Cut Chicken Supplier offering chicken pieces at affordable and cheap prices. This chicken shop, which is located in Serang City, has a complete list and list of chicken pieces. The development of digitalization is increasingly rapid and fulfills all aspects of human life throughout the world. Not only that, updates on the development of information technology are increasingly providing easy services to every user. Online shop or online business today is not something foreign to the court community in any corner of the world, especially the Indonesian people, whether t

APA, Harvard, Vancouver, ISO, and other styles

45

Chatterjee, Joyee. "Abolee: way forward in rural markets." Emerald Emerging Markets Case Studies 13, no. 2 (2023): 1–39. http://dx.doi.org/10.1108/eemcs-02-2023-0043.

Full text

Abstract:

Learning outcomes The learning outcomes of this study are as follows: Teaching Objective 1: Students will describe specific characteristics of the rural market in India and will draw out the differences vis-a-vis the urban markets. Teaching Objective 2: Students will describe about the push versus pull strategy and various channels of distribution in rural areas. Teaching Objective 3: The students will explain the 4As of the rural marketing mix and apply the same in the context of the case. Teaching Objective 4: The case can be applied with respect to the health-belief model to help students a

APA, Harvard, Vancouver, ISO, and other styles

46

Vahedi Nemani, Alireza, Mahya Ghaffari, Kazem Sabet Bokati, Nima Valizade, Elham Afshari, and Ali Nasiri. "Advancements in Additive Manufacturing for Copper-Based Alloys and Composites: A Comprehensive Review." Journal of Manufacturing and Materials Processing 8, no. 2 (2024): 54. http://dx.doi.org/10.3390/jmmp8020054.

Full text

Abstract:

Copper-based materials have long been used for their outstanding thermal and electrical conductivities in various applications, such as heat exchangers, induction heat coils, cooling channels, radiators, and electronic connectors. The development of advanced copper alloys has broadened their utilization to include structural applications in harsh service conditions found in industries like oil and gas, marine, power plants, and water treatment, where good corrosion resistance and a combination of high strength, wear, and fatigue tolerance are critical. These advanced multi-component structures

APA, Harvard, Vancouver, ISO, and other styles

47

Adetunla, Adedotun, Sunday Afolalu, Tien-Chien Jen, and Ayodele Ogundana. "The Advances of Tribology in Materials and Energy Conservation and Engineering Innovation." E3S Web of Conferences 391 (2023): 01014. http://dx.doi.org/10.1051/e3sconf/202339101014.

Full text

Abstract:

Tribology has been significantly contributing to materials, energy conservation and engineering innovation. This paper elaborates the development of tribology considering in detail in energy factor, tribological role of efficiency in the society by introducing lubricants which reduces the effective friction while moving the mass which significantly improves overall efficiency of the process all though it was primitive. The objectives of the study of The American Society of Mechanical Engineers (ASME) are working to expand energy conservation, particularly through tribology, by doing things lik

APA, Harvard, Vancouver, ISO, and other styles

48

Hotun, I. A., and A. M. Kazymir. "RESULTS OF THE WORKS OF THE LAST SEASONS IN THE SETTLEMENTS OF OUTSKIRTS OF KIEV." Archaeology and Early History of Ukraine 30, no. 1 (2019): 140–71. http://dx.doi.org/10.37445/adiu.2019.01.12.

Full text

Abstract:

Works of the last quarter of XX century, persuasively proved that the socio-economic development of the villages of the south-Russ reached a high level, having conditioned their parity relations with towns. Unlike the West European model, in the cities of Eastern Europe, according to experts, they were the centers of the agricultural surrounding, which facilitated their determination as collective feudal castles. Therefore, researchers should not set villages against towns, but consider them in a formational unity. An example of a rural agglomeration where the resources of the capital of the p

APA, Harvard, Vancouver, ISO, and other styles

49

"A perspective on new ceramics and ceramic composites." Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences 322, no. 1567 (1987): 465–78. http://dx.doi.org/10.1098/rsta.1987.0065.

Full text

Abstract:

The present status, characteristic features and important aspects of new ceramics and ceramic composites in high-technology industries are reviewed. Current problems requiring urgent solution are described, and some possibilities for solving them by introducing new ideas and results of some trials are discussed. Based on these, the prospects for the new ceramics and ceramic composite industries in the 1990s are reviewed.

APA, Harvard, Vancouver, ISO, and other styles

50

Scheithauer, Uwe, Robert Johne, Lisa Gottlieb, Steven Weingarten, Hajo Wiemer, and Stefan Holtzhausen. "Recent developments in the field of additive manufacturing of ceramic-based multi-material components open the door to highly functionalized components." Progress in Additive Manufacturing, April 29, 2025. https://doi.org/10.1007/s40964-025-01112-6.

Full text

Abstract:

Abstract The properties of components are all based on three key aspects: the materials used, the component geometry, and the surface finish. Material selection is of critical importance, as each class of materials—polymers, metals, ceramics, or glass—exhibits different properties. As applications become more complex, the need for material combinations increases, leading to the development of functionally graded materials (FGMs) that enable multifunctionality through compositional gradients. Ceramic materials exhibit exceptional thermal, chemical, and mechanical properties, making them indispe

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!