Academic literature on the topic 'IncF plasmid'

ABSTRACT Despite the important contribution of self-transmissible plasmids to bacterial evolution, little is understood about the range of hosts in which these plasmids have evolved. Our goal was to infer this so-called evolutionary host range. The nucleotide composition, or genomic signature, of plasmids is often similar to that of the chromosome of their current host, suggesting that plasmids acquire their hosts’ signature over time. Therefore, we examined whether the evolutionary host range of plasmids could be inferred by comparing their trinucleotide composition to that of all completely sequenced bacterial chromosomes. The diversity of candidate hosts was determined using taxonomic classification and genetic distance. The method was first tested using plasmids from six incompatibility (Inc) groups whose host ranges are generally thought to be narrow (IncF, IncH, and IncI) or broad (IncN, IncP, and IncW) and then applied to other plasmid groups. The evolutionary host range was found to be broad for IncP plasmids, narrow for IncF and IncI plasmids, and intermediate for IncH and IncN plasmids, which corresponds with their known host range. The IncW plasmids as well as several plasmids from the IncA/C, IncP, IncQ, IncU, and PromA groups have signatures that were not similar to any of the chromosomal signatures, raising the hypothesis that these plasmids have not been ameliorated in any host due to their promiscuous nature. The inferred evolutionary host range of IncA/C, IncP-9, and IncL/M plasmids requires further investigation. In this era of high-throughput sequencing, this genomic signature method is a useful tool for predicting the host range of novel mobile elements.

Bacterial conjugation constitutes a major horizontal gene transfer mechanism for the dissemination of antibiotic resistance genes among human pathogens. Antibiotic resistance spread could be halted or diminished by molecules that interfere with the conjugation process. In this work, synthetic 2-alkynoic fatty acids were identified as a novel class of conjugation inhibitors. Their chemical properties were investigated by using the prototype 2-hexadecynoic acid and its derivatives. Essential features of effective inhibitors were the carboxylic group, an optimal long aliphatic chain of 16 carbon atoms, and one unsaturation. Chemical modification of these groups led to inactive or less-active derivatives. Conjugation inhibitors were found to act on the donor cell, affecting a wide number of pathogenic bacterial hosts, including&nbsp;<em>Escherichia</em>,&nbsp;<em>Salmonella</em>,&nbsp;<em>Pseudomonas</em>, and<em>Acinetobacter</em>&nbsp;spp. Conjugation inhibitors were active in inhibiting transfer of IncF, IncW, and IncH plasmids, moderately active against IncI, IncL/M, and IncX plasmids, and inactive against IncP and IncN plasmids. Importantly, the use of 2-hexadecynoic acid avoided the spread of a derepressed IncF plasmid into a recipient population, demonstrating the feasibility of abolishing the dissemination of antimicrobial resistances by blocking bacterial conjugation.

Mobile genetic elements, such as plasmids, facilitate the spread of antibiotic resistance genes in Enterobacterales. In line with this, we investigated the plasmid-resistome of seven blaOXA-48 gene-carrying Klebsiella pneumoniae isolates, which were isolated between 2013 and 2014 at the University Medical Center in Göttingen, Germany. All isolates were subjected to complete genome sequencing including the reconstruction of entire plasmid sequences. In addition, phenotypic resistance testing was conducted. The seven isolates comprised both disease-associated isolates and colonizers isolated from five patients. They fell into two clusters of three sequence type (ST)101 and two ST11 isolates, respectively; and ST15 and ST23 singletons. The seven isolates harbored various plasmids of the incompatibility (Inc) groups IncF, IncL/M, IncN, IncR, and a novel plasmid chimera. All blaOXA-48 genes were encoded on the IncL/M plasmids. Of note, distinct phenotypical resistance patterns associated with different sets of resistance genes encoded by IncL/M and IncR plasmids were observed among isolates of the ST101 cluster in spite of high phylogenetic relatedness of the bacterial chromosomes, suggesting nosocomial transmission. This highlights the importance of plasmid uptake and plasmid recombination events for the fast generation of resistance variability after clonal transmission. In conclusion, this study contributes a piece in the puzzle of molecular epidemiology of resistance gene-carrying plasmids in K. pneumoniae in Germany.

ABSTRACTAmong the pathovars ofEscherichia coliin cattle, necrotoxigenicE. coli(NTEC) is defined by the production of cytotoxic necrotizing factors (CNFs). In particular, type 2 NTEC (NTEC2) strains are frequent in diarrheic and septicemic calves and usually coproduce CNF type 2 (CNF2), cytolethal distending toxin type III (CDTIII), and fimbrial adhesins of the F17 family, whose genetic determinants have frequently been reported on the same Vir-like plasmid. In this study, we investigated the genetic environment of thecnf2,f17Ae, andcdtIIIgenes in a collection of fecalE. coliisolates recovered from 484 French and 58 Iranian calves. In particular, we highlighted the spread ofcnf2,f17Ae, andcdtIIIon similar 150-kb IncF plasmids harboring the newly assigned repFII replicon allele F74 in NTEC2 isolates. Interestingly, this 150-kb IncF plasmid differed from the 140-kb IncF plasmid harboring the newly assigned repFII replicon allele F75 and carryingcnf2alone. These results suggest two divergent lineages ofcnf2-carrying IncF plasmids depending on the presence of thef17AeandcdtIIIgenes. This partition was observed inE. colistrains of unrelated backgrounds, suggesting two different evolutionary paths ofcnf2-carrying IncF plasmids rather than divergent evolutions of NTEC2 clones. The driving forces for such divergent evolutions are not known, and further studies are required to clarify the selection of plasmid subtypes spreading virulence determinants inE. coli, in particular, plasmids of the IncF family.

Abstract Objectives NDM carbapenemases have spread worldwide. However, little information exists about the impact of NDM-producing Enterobacteriaceae in Spain. By WGS, we sought to elucidate the population structure of NDM-like-producing Klebsiella pneumoniae and Escherichia coli in Spain and to determine the plasmids harbouring blaNDM-like genes. Methods High-resolution SNP typing, core-genome MLST and plasmid reconstruction (PlasmidID) were performed on 59 NDM-like-producing K. pneumoniae and 8 NDM-like-producing E. coli isolated over an 8 year period in Spain. Results Five major epidemic clones of NDM-producing K. pneumoniae caused five important nationwide outbreaks: ST437/NDM-7, ST437/NDM-1, ST147/NDM-1, ST11/NDM-1 and ST101/NDM-1; in contrast, the spread of NDM-producing E. coli was polyclonal. Three blaNDM types were identified: blaNDM-1, 61.2%; blaNDM-7, 32.8%; and blaNDM-5, 6%. Five K. pneumoniae isolates co-produced other carbapenemases (three blaOXA-48 and two blaVIM-1). The average number of acquired resistance genes was higher in K. pneumoniae than in E. coli. The plasmids encoding blaNDM-like genes belonged to IncFII, IncFIB, IncX3, IncR, IncN and IncC types, of which IncF, IncR and IncC were associated with MDR. The genetic surroundings of blaNDM-like genes showed a highly variable region upstream of ISAba125. Conclusions In recent years NDM-producing K. pneumoniae and E. coli have emerged in Spain; the spread of a few high-risk K. pneumoniae clones such as ST437/NDM-7, ST437/NDM-1, ST147/NDM-1, ST11/NDM-1 and ST101/NDM-1 have caused several interregional outbreaks. In contrast, the spread of NDM-producing E. coli has been polyclonal. Plasmid types IncFII, IncFIB, IncX3, IncR, IncN and IncC carried blaNDM, and the same IncX3 plasmid was detected in K. pneumoniae and E. coli.

ABSTRACTCTX-M-15 now appears to be the dominant extended-spectrum β-lactamase worldwide, and a number of different factors may contribute to this success. These include associations betweenblaCTX-M-15and particular plasmids (IncF) and/or strains, such asEscherichia coliST131, as well as the genetic contexts in which this gene is found. We previously identifiedblaCTX-M-15as the dominant ESBL gene in the western Sydney area, Australia, and found that it was carried mainly on IncF or IncI1 plasmids. Here, we have mapped the multiresistance regions of the 11 conjugative plasmids with one or more IncF replicons obtained from that survey and conducted a limited comparison of plasmid backbones. Two plasmids with only an IncFII replicon appear to be very similar to the published plasmids pC15-1a and pEK516. The remaining nine plasmids, with multiple IncF replicons, have multiresistance regions related to those of pC15-1a and pEK516, but eight contain additional modules previously found in resistance plasmids from different geographic locations that carry a variety of different resistance genes. Differences between the multiresistance regions are largely due to IS26-mediated deletions, insertions, and/or rearrangements, which can explain the observed variable associations betweenblaCTX-M-15and certain other resistance genes. We found no evidence of independent movement ofblaCTX-M-15or of a large multiresistance region between different plasmid backbones. Instead, homologous recombination between common components, such as IS26and Tn2, appeared to be more important in creating new multiresistance regions, and this may be coupled with recombination in plasmid backbones to reassort multiple IncF replicons as well as components of multiresistance regions.

ABSTRACTIn this study, we focused on determining the distribution and prevalence of major plasmid replicons in β-lactam-resistantEscherichia fergusoniiandEnterobacteriaceaeof animal and human origin. A high degree of plasmid variability and multiple plasmid replicons were observed among the isolates. The IncF and IncI1 replicons were the most prevalent inE. fergusoniiandSalmonella entericaserovar Indiana isolated from swine and poultry in South Korea, respectively. The presence of broad-host-range plasmid replicons such as IncN, IncA/C, IncHI1, and IncHI2 that are associated with important virulence genes and toxins as well as antimicrobial resistance determinants indicates thatE. fergusoniihas the potential to become an important pig pathogen and possible emerging opportunistic zoonotic pathogen.

Abstract&#x0D; Multidrug resistance is a great challenge for the treatment of infectious diseases. We determined antibiotic resistance patterns, integrons, plasmid-mediated ESBL-, AmpC beta-lactamase-, carbapenemase-, colistin resistance genes, plasmid replicon types and phylogeny of fecal E. coli strains isolated from domestic cats and dogs in Turkey.&#x0D; A total of 104 fecal samples of healthy 49 cats and 55 dogs were examined. The integrons, plasmid-mediated resistance genes, plasmid replicon types and phylogroups were determined by PCR. Antimicrobial susceptibilities were performed by disc diffusion and microdilution methods.&#x0D; &#x0D; coli strains were mostly resistant to AMP (56.73%), SXT (39.42%), CTX (38.46%) and CIP (30.77%). Colistin resistance was not detected. ESBL and carbapenemase rates were 35.5 % and 7.69%, respectively. Eighty (76.9%) and 49 (47.1%) strains were harboring class I and class II integrons, respectively. Besides 12 strains were shown to possess class III integrons. The most frequently detected genes were blaCTX-M (48.08%), blaTEM (45.19%) and blaVIM (20.19%). In our study, none of strains were positive for mcr-1 and mcr-2 genes. Integrons were mostly found on plasmids of incompatibility groups IncF (71.25%) and strains bearing CTX-M and TEM carried a wide range of plasmid replicons of which IncF, IncFIB, IncK, and IncN. The majority of the strains were grouped in B2 (31.73%) and B1 (22.12%) and resistant bacteria mostly belonged to phylogroup B2.&#x0D; &#x0D; We showed an increasing trend in ESBL-producing E. coli among fecal microbiota members. E. coli strains with different plasmid replicon types and phylogroups isolated from cats and dogs can be resistant to various antibiotics which are used in human and veterinary medicine.

Non-typhoidal Salmonella enterica is a leading cause of gastrointestinal illnesses in the United States. Among the 2,600 different S. enterica serovars, Infantis has been significantly linked to human illnesses and is frequently recovered from broilers and chicken parts in the U.S. A key virulence determinant in serovar Infantis is the presence of the megaplasmid pESI, conferring multidrug resistance. To further characterize the virulence potential of this serovar, the present study identified the types of plasmids harbored by Infantis strains, recovered from surface waters adjacent to leafy greens farms in California. Sequencing analysis showed that each of the examined 12 Infantis strains had a large plasmid ranging in size from 78 kb to 125 kb. In addition, a second 4-kb plasmid was detected in two strains. Plasmid nucleotide queries did not identify the emerging megaplasmid pESI in the examined Infantis strains; however, the detected plasmids each had similarity to a plasmid sequence already cataloged in the nucleotide databases. Subsequent comparative analyses, based on gene presence or absence, divided the detected plasmids into five distinct clusters, and the phylogram revealed these Infantis plasmids were clustered based either on the plasmid conjugation system, IncI and IncF, or on the presence of plasmid phage genes. Assignment of the putative genes to functional categories revealed that the large plasmids contained genes implicated in cell cycle control and division, replication and recombination and defense mechanisms. Further analysis of the mobilome, including prophages and transposons, demonstrated the presence of genes implicated in the release of the bactericidal peptide microcin in the IncF plasmids and identified a Tn10 transposon conferring tetracycline resistance in one of the IncI1 plasmids. These findings indicated that the plasmids in the environmental S. enterica serovar Infantis strains from surface waters harbored a wide variety of genes associated with adaptation, survivability and antimicrobial resistance.

ABSTRACTThe resistome of the multidrug-resistantEscherichia colistrain 271 carrying the plasmid-mediatedblaNDM-1carbapenemase gene was analyzed by high-throughput genome sequencing. The p271A plasmid carrying theblaNDM-1gene was 35.9 kb in size and possessed an IncN-type backbone that harbored a novel replicase gene. Acquisition of theblaNDM-1gene on plasmid p271A had been likely the result of a cointegration event involving the transposase of Tn5403. The expression ofblaNDM-1was associated with the insertion sequence ISAba125likely originating fromAcinetobacter baumannii. E. coli271 accumulated multiple resistance determinants, including five β-lactamase genes (comprising the extended-spectrum β-lactamase CTX-M-15), two 16S RNA methylase ArmA- and RmtB-encoding genes, and theqepAgene encoding an efflux pump involved in resistance to fluoroquinolones. These resistance genes were located on three additional plasmids, of 160 kb (IncA/C), 130 kb (IncF), and 110 kb (IncI1). In addition, several chromosomally encoded resistance determinants were identified, such as topoisomerase mutations, porin modifications and truncations, and the intrinsicampCgene ofE. colithat was weakly expressed. The multidrug resistance pattern observed forE. coli271 was therefore the result of combined chromosome- and plasmid-encoded mechanisms.

A produção de beta-lactamases de espectro estendido (ESBL) tornou-se um desafio em saúde pública por restringir as opções terapêuticas para o tratamento de infecções causadas por bactérias gram-negativas. O objetivo desse estudo foi avaliar a ocorrência de estirpes produtoras de ESBL nas granjas de suínos brasileiras, bem como caracterizar os plasmídeos carreadores dos genes blaESBL quanto ao grupo de incompatibilidade, tamanho e presença de genes de resistência adicionais. As estirpes foram isoladas em meio MacConkey e identificadas por MALDI-TOF. Posteriormente, os valores de concentração inibitória mínima foram determinados por microdiluição e/ou ágar diluição para aminoglicosídeos, carbapenens, cefalosporinas, fluoroquinolonas, tetraciclinas, sulfas e cefalosporinas associadas a inibidores competitivos. Os genes codificadores de beta-lactamases foram identificados por PCR assim como o grupo de incompatibilidade dos respectivos plasmídeos carreadores e o grupo filogenético das estirpes de E. coli. A análise de clonalidade foi realizada por ERIC-PCR e MLST. Finalmente, o ambiente genético do gene blaCTX-M-15 foi determinado por PCR e/ou sequenciamento, sendo que os plasmídeos carreando genes blaESBL foram transferidos às estirpes receptoras E. coli TOP10 e C600 por transformação e conjugação, respectivamente, e parcialmente sequenciados. As estirpes de Escherichia coli produtoras de CTX-M-2 foram as mais prevalentes, sendo endêmicas no estado de Minas Gerais. Além disso, é relatada a presença da enzima CTX-M-15 em estirpes de E. coli (ST224, ST410, ST1284), Klebsiella pneumoniae, Enterobacter cloacae e Pseudomonas aeruginosa (ST3201). O gene blaCTX-M-15 esteve associado a plasmídeos IncF e foi transferido com sucesso para a estirpe receptora E.coli TOP10, plasmídeos IncF também foram associados a presença do gene blaCTX-M-2. O gene blaCTX-M-8 foi detectado em quatro novos STs de E. coli (ST5845, ST5847, ST5848 e ST5350) e não foi adquirido pelas estirpes receptoras. Estes dados indicam que a vigilância de fenótipos resistentes na produção suína deve de ser considerada uma prioridade, assim como a preferência ao uso de antimicrobianos de espectro estrito a fim de evitar a disseminação desses fenótipos nas granjas e sua possível transmissão para população humana.<br>Extended-spectrum beta-lactamase production (ESBL) became a great challenge regarding public health because limit the therapeutic options to treat infections by gram-negative bacteria. The aim of this study were evaluate the occurrence of ESBL producers in Brazilian swine farms and characterize blaESBL-carrying plasmids by sizing and incompatibility group and presence of additional resistance genes. Strains were isolated in MacConkey agar and identified by Maldi-Tof. Next, the minimal inhibitory concentration values were determined by microdilution and/or agar dilution to aminoglycosides, carbapenems, cephalosporins, fluoroquinolones, tetracyclines, sulfas and cephalosporin/inhibitors association. Betalactamase encoding genes, plasmid incompatibility group and Escherichia coli phylogenetic group were determined by PCR. Clonal relatedness was evaluated by ERIC-PCR and MLST. Finally, the blaCTX-M-15 genetic environment was determined by PCR and/or sequencing and blaESBL-carrying plasmids transferred to E. coli TOP10 and C600 receptor strains by transformation and conjugation, respectively, and partially sequenced. CTX-M-2-producing E. coli were the most prevalent phenotype, which were endemic in Minas Gerais State. Moreover, the CTX-M-15 enzyme emerged among E. coli (ST224, ST410, ST1284), Klebsiella pneumoniae, Enterobacter cloacae e Pseudomonas aeruginosa (ST3201) strains. The blaCTX-M-15 was associated with IncF plasmids, which were successfully transferred to E.coli TOP10, similarly, IncF plasmids were found harboring the blaCTX-M-2. The blaCTX-M-8, detected in four novel E. coli sequence types (ST5845, ST5847, ST5848 e ST5350), was not acquired by receptor strains. Thus, the surveillance of resistant phenotypes in swine production must be established as a priority as well as narrow spectrum antimicrobials prescription antimicrobial instead broad spectrum to prevent the dissemination of these phenotypes in farms and their transmission to human population.

IncC plasmids are large conjugative broad host range plasmids important in the spread of resistance genes conferring resistance to a wide range of clinically important antibiotics. In this study, fundamental aspects of the biology of IncC plasmids and the related IncA plasmids were examined. Traditional incompatibility testing confirmed that IncA and IncC plasmids are stable together for more than 100 generations in the absence of antibiotic selection and are therefore compatible. Entry exclusion experiments revealed that an IncC plasmid in the recipient could completely prevent the conjugative transfer of another IncC or IncA plasmid. IncA plasmids were also able to completely exclude IncC plasmids. This level of exclusion was several orders of magnitude higher than observed in other characterised systems. The gene required in the recipient, eexC in IncC plasmids and eexA in IncA plasmids, was predicted based on the position of exclusion genes in known exclusion systems and found to be sufficient to exclude both IncA and IncC plasmids. IncA and IncC plasmids are able to mobilise the integrative mobilisable element (IME) Salmonella genomic island 1 (SGI1) and its variants. These element types interact in several specific ways. The presence of an SGI1 variant in the donor allowed an IncC plasmid to avoid exclusion exerted by EexC in the recipient but not when the complete plasmid when present, indicating there are further interactions preventing entry of IncC plasmids by conjugation. Further exclusion experiments showed that SGI1 in the recipient reduced conjugative transfer of IncC plasmids by 15-240 fold. However, IncC plasmids did not exclude SGI1. IncC plasmids have gained increasing attention with >350 sequences now available in GenBank. Examination of the sequences of IncC plasmids used in this study and sequences available in GenBank led to the identification of several important lineages of type 2 IncC plasmids based on the positions of resistance islands. Some lineages are found in a wide number of species and are globally disseminated. Extensive evolution was observed in the resistance islands of these important lineages. In addition, two novel trimethoprim resistance genes were found on IncC plasmids or an IncC plasmid segment and were characterised.

Thesis (DSc)--Stellenbosch University, 2014.<br>ENGLISH ABSTRACT: Plasmids belonging to the IncQ family have an exceptionally broad host-range and are highly mobilizable in the presence of the self-transmissible IncP plasmids. All IncQ plasmids identified to date have certain features in common. The feature that distinguishes them most from all other plasmids is that they have a unique mechanism of replication. Their replicons consist of repA, repB and repC genes encoding a replicase, primase and DNA-binding proteins respectively. All IncQ plasmids contain at least three 22-bp iterons (or 20-bp iterons with 2-bp spacers) that are identical in sequence and to which the RepC DNA-binding protein binds. They replicate by means of a unique strand-displacement mechanism that is considered to place a limit on their size. Replication proceeds by a partially single-stranded intermediate that is believed to result in an increased likelihood of structural instability with an increase in plasmid size. The most compact backbone of IncQ plasmids is approximately 5.9-kb and the largest natural IncQ plasmid reported is 14.2-kb. Although the mobilization regions of IncQ plasmids are not as unique as the replicons, they are all characterized by the primase of the replicon being fused to the relaxase of the mobilization genes. The remainder of the mobilization genes may vary substantially in number and sequence between plasmids and have been subdivided into at least four distinct lineages. This dissertation consists of twenty one manuscripts published during the period 1984 to 2012. The focus is almost entirely on the IncQ plasmid subfamily known as IncQ2. Most of the earlier work was on determining the nature and extent of the replicons, mobilization genes and the toxin-antitoxin plasmid stability system. A strong theme in the latter work focussed on using the natural variation among the IncQ2 plasmids as a means to understand IncQ plasmid evolution. The collection of articles comprises a combination of original research and reviews.<br>AFRIKAANSE OPSOMMING: Plasmiede wat aan die IncQ familie behoort kom ‘n uitsonderlike wye gasheerselreeks voor en is hoogs mobiliseerbaar deur middel van die selfoordraagbaar IncP plasmiede. Alle IncQ plasmiedes wat tot datum identifiseer is het sekere gemeenskaplike eienskappe. Die eienskap wat hulle van alle ander plasmiedes onderskei is hul unieke dupliseringsmeganisme. Hul dupliseringsmeganisme bestaan uit repA, repB en repC gene wat onderskeidlik ‘n helikase, ‘n ‘primase’ en ‘n DNSbindingsproteïen enkodeer. Die IncQ plasmiede het ten minste drie 22-bp iterone (of 20-bp iterone met 2-bp skeidingsnukleotiede) met ‘n identiese nukleotiedvolgorde en waaraan die RepCbindingsproteïen bind. Hulle dupliseer deur middel van ‘n unieke DNA-string-vervangingsmeganisme wat ‘n beperking op hul grootte plaas. Tydens replikasie word ‘n intermediêre struktuur gevorm wat gedeeltelik enkelstring is en dit is blykbaar die rede vir ‘n verhoging in strukturële onstabilitiet as die plasmied groter word. Die kleinste ruggraat onder die IncQ plasmiede is min of meer 5.9-kb en die grootste natuurlike IncQ plasmied wat gerapporteer is, is 14.2-kb. Alhoewel die mobiliseringsgebied van die IncQ plasmiede nie so duidelik uitkenbaar as die replikons nie, hierdie gebied is gekenmerk deur ‘n ‘primase’ wat aan ‘n ‘relaxase’ in die mobiliseringsgene gekoppel is. Die oorblywende mobiliseringsgene verskil in beide getal en nukleotiedvolgorde tussen plasmiede en is gebruik om die plasmiede in vier duidelike oorsponggroepe in te deel. Hierdie proefskrif bestaan uit een-en-twintig artikels wat tussen 1984 en 2012 gepubliseer is. Die fokus is hoofsaaklik op die IncQ plasmiedsubfamilie wat as IncQ2 bekend is. Baie van die vroeër werk het oor die aard en omvang van die duplisering en mobiliseringsgene asook die toksienteentoksien plasmiedstabiliseringsmeganisme hanteer. ‘n Sterk tema in die latere werk was om die natuurlike variasie onder die IncQ2 plasmiede te bestudeer ten einde IncQ plasmiedevolusie te verstaan. Die publikasie versameling bestaan uit ‘n kombinasie van oorspronklike navorsing en oorsigartikels.

L'îlot génomique Salmonella Genomic Island 1 (SGI1) est un élément intégratif et mobilisable, support de nombreux gènes de résistance aux antibiotiques, et identifié chez de nombreux genres bactériens. Le transfert de SGI1 requiert spécifiquement la présence d'un plasmide conjugatif du groupe d'incompatibilité IncA/C. Les régulateurs globaux AcaCD des plasmides IncA/C activent l’excision de SGI1 qui, une fois sous forme d’un intermédiaire extrachromosomique circulaire, va pouvoir être transféré en utilisant la machinerie de conjugaison encodée par les plasmides IncA/C (mobilisation conjugative en trans). Depuis la description de SGI1, plusieurs études ont relaté une apparente stabilité de SGI1 au cours des générations bactériennes. Cependant, des observations préliminaires indiquaient des difficultés de cohabitation entre SGI1 et les plasmides IncA/C. L’objectif de ce travail était d’étudier la stabilité de SGI1 et sa compatibilité avec les plasmides conjugatifs IncA/C dont dépend sa mobilité. L’opéron putatif S026- S025 de SGI1 a été identifié comme constituant un système Toxine-Antitoxine (TA) qui a été appelé sgiAT. Le rôle de ce système TA dans la stabilité de SGI1 a été mis en évidence en présence d'un plasmide IncA/C. De plus, l’incompatibilité entre SGI1 et les plasmides IncA/C a été démontrée expérimentalement pour la première fois. La stabilité de SGI1 est liée à son intégration chromosomique. Cependant, lorsque SGI1 est excisé du chromosome et donc vulnérable (il peut être perdu), c’est-à-dire en présence d’un plasmide IncA/C, le système TA sgiAT joue un rôle important dans le maintien de SGI1 dans les populations bactériennes<br>The multidrug resistance Salmonella Genomic Island 1 (SGI1) is an integrative mobilizable element identified in several enterobacterial pathogens. This chromosomal island requires specifically the presence of a conjugative IncA/C plasmid to be excised and transfered by conjugation (mobilization in trans). Preliminary observations suggest stable maintenance of SGI1 in the bacterial host but paradoxically also incompatibility between SGI1 and IncA/C plasmids. Here, using a Salmonella enterica serovar Agona clonal bacterial population as model, we demonstrate that a Toxin-Antitoxin (TA) system encoded by SGI1 plays a critical role in its stable host maintenance when an IncA/C plasmid is concomitantly present. This system, designated sgiAT for Salmonella genomic island 1 Antitoxin and Toxin respectively, thus seems to play a stabilizing role in a situation where SGI1 is susceptible to be lost through plasmid IncA/C-mediated excision. Moreover and for the first time, the incompatibility between SGI1 and IncA/C plasmids was experimentally confirmed

KPC (Klebsiella pneumoniae carbapenemases) são -lactamases da classe A de Ambler globalmente disseminadas, com 10 variantes, sendo predominates KPC-2 e KPC-3. O objetivo deste trabalho foi estudar a genética e epidemiologia molecular de enterobactérias resistentes aos carbapenêmicos isoladas no Brasil. Sessenta e quatro enterobactérias resistentes aos carbapenêmicos foram analisadas: 57 Klebsiella pneumoniae (Kp), 5 Enterobacter cloacae (Ecl), 1 Serratia marcescens (Sm) e 1 Citrobacter freundii (Cf), de diferentes pacientes, em seis hospitais e em duas distintas regiões do Brasil. Identificação e testes de sensibilidade antimicrobiana foram realizados por sistemas semi-automáticos e métodos padronizados. A relação clonal foi estabelecido por Pulsed-field gel electrophoresis (PFGE) e também por tipagem por sequenciamento de multilocus no caso de K. pneumoniae. A presença de genes que codificam carbapenemases e -lactamases de espectro estendido foi pesquisada. A caracterização de blaKPC-2, do ambiente genético e de plasmídeos incluiu PCR e sequenciamento, análises de RFLP, S1-PFGE e hibridação. Os isolados Kp corresponderam a 5 pulsotipos, por PFGE, ligados a 6 tipos de sequência (ST): KPA-ST258 (n = 51 com 6 subtipos), KpA6-ST11 (n = 1), KPB-ST327 (n = 1), KPC-ST44 (n = 2), KPD-ST437 (n = 1) e KPE-ST48 (n = 1). Ecl foram agrupados em clones e e, Sm e Cf representam um clone cada. Todos os isolados foram resistentes aos -lactâmicos, sensíveis à colistina e tigeciclina e mostraram fenótipos variáveis contra aminoglicosídeos, quinolonas, nitrofurantoína e sulfametoxazol-trimetoprim. Heterorresistência a carbapenêmicos foi observada para isolados de Kp e Cf, conforme relatado anteriormente com produtores de KPC-2 e VIM. Esse estudo relata a disseminação do gene blaKPC-2 nos estados de São Paulo e Rio de Janeiro facilitada por clones de K. pneumoniae pertencentes ao globalmente disseminado Complexo Clonal CC258 (ST258, ST437 e ST11) e uma diversidade de plasmídeos (IncFII-KpA, IncN-Kp e Ecl, IncL/M-Sm e Cf e, dois plasmídeos não-tipáveis carreando Tn4401a ou Tn4401b) disseminados com sucesso entre as enterobactérias. Constitui também a primeira descrição do ST258 no Brasil associada a um surto em um hospital universitário da cidade de Ribeirao Preto. Este trabalho apontou a alta diversidade de elementos genéticos disponíveis abrigando blaKPC-2. Isso poderia ampliar enormemente a disseminação desse gene no Brasil como também no continente.<br>KPC (Klebsiella pneumoniae carbapenemases) are globally spread -lactamases of the Ambler class A comprising 10 variants, KPC-2 and KPC-3 being predominant. The objective of this work was study the genetic and molecular epidemiology of carbapenem resistant-enterobacterial isolates in Brazil. Sixty-four carbapenem resistant isolates were analyzed: 57 Klebsiella pneumoniae (Kp), 5 Enterobacter cloacae (Ecl), 1 Serratia marcescens (Sm) and 1 Citrobacter freundii (Cf) from different patients at six hospitals in two different Brazilian regions. Identification and antimicrobial susceptibility testing were accomplished by using semiautomatic systems and standard methods. Clonal relatedness was established by Pulsed-Field Gel Electrophoresis (PFGE) and also by multilocus sequence typing in the case K. pneumoniae isolates. The presence of genes encoding carbapenemases and extended spectrum -lactamases was searched. Characterization of blaKPC-2, genetic environment and plasmids included PCR and further sequencing, RFLP analyses, S1-PFGE and hybridization. The Kp isolates corresponded to 5 PFGE types linked to 6 sequence types (ST): KpA-ST258 (n=51 comprising 6 subtypes), KpA6-ST11 (n=1), KpB-ST327 (n=1), KpC-ST44 (n=2), KpD-ST437 (n=1) and KpE-ST48 (n=1). Ecl isolates were grouped in and clones and, Sm and Cf represent one clone each. All isolates were resistant to -lactams, susceptible to colistin and tigecycline and showed variable phenotype against aminoglycosides, quinolones, nitrofurantoin and trimethoprim-sulfamethoxazole. Heteroresistance to carbapenems was observed for Kp and Cf isolates, as previously reported to KPC-2 and VIM producers. This study reports the spread of blaKPC-2 in Sao Paulo and Rio de Janeiro states facilitated by globally spread CC258-K. pneumoniae clones (ST258, ST11, ST437) and a diversity of plasmids (IncFII-KpA, IncN-Kp and Ecl, IncL/M-Sm and Cf and, two untypeable plasmids carrying Tn4401a or Tn4401b) successfully disseminated among Enterobacteriaceae species. It also constitutes the first description of ST258 in Brazil which was associated with a hospital outbreak in Ribeirao Preto city. This work pointed out the high diversity of available genetic elements harboring blaKPC-2. This might greatly amplify the dissemination of KPC genetic in Brazil and within of the South America continent.

Plasmid ColIb-P9 is a 93.2 kb self-transmissible plasmid, belonging to the I1 incompatibility group. Whilst much data had been gained concerning the molecular biology of conjugation mediated by this plasmid, a lack of information exsisted concerning the genetic organisation of the transfer genes. A physical map of the plasmid was constructed by detailed restriction analysis of DNA fragments sub-cloned from ColIb-P9. These fragments were also used to locate the positions of the transfer gene sog and the origin of transfer. Transposons Tn5 and Tnl723 were used to construct insertion mutants at defined points in ColIb-P9 and the effect of these on the expression of various transfer-related functions was studied. Using this technique, the probable location of the genes encoding the thick and thin sex pili were identified and also the site of the plasmid-encoded nuclease gene. The exact location of the entry exclusion gene was also determined. Complementation studies using the sub-cloned fragments of ColIb-P9 and a set of cosmid-clones generated from ColIbdrd-1 indicated that a positive regulator of the expression of the transfer genes exsisted and that this was composed of two genetically distinct elements. Studies involving wild type ColIb-P9 (drd+) indicated that this positive regulatory system is subject to negative control in cells containing the drd+ plasmid. The information gained from these studies was combined into a model of the organisation of the transfer genes of ColIb-P9. This defines at least three separate Tra regions, covering some 50 kb of the plasmid, with the origin of transfer located at one end of the transfer region.

Plasmid DNA partitioning is a crucial process for the transfer of at least a single copy of plasmid to the daughter cells during bacterial cell division. Partitioning for various low-copy number plasmids involves a DNA-binding protein (ParB), a centromere-like DNA site ( parS) and a ParA-family protein. Interestingly, the RK2 plasmid encodes two ParA proteins of different lengths. The longer protein is IncC1 (364 a.a), while IncC2 lacks a N- terminal domain of 105 amino acids (IncC NTD). The secondary structure of IncC NTD by NMR spectroscopy and other biophysical methods has been determined as random coil. It appears to bind DNA weakly and non-specifically. The expression and purification of IncC1 and IncC2 proteins was optimized. The two proteins and IncC NTD were characterized using various biophysical methods including Circular Dichroism, Analytical Ultracentrifugation, Small Angle X-ray Scattering, Size Exclusion Chromatography-Multi Angle Light Scattering, and EMSAs. Bacterial two hybrid assays and chemical crosslinking showed the two IncC proteins form homo- and hetero-dimers and interact with KorB protein. IncC1 and IncC2 proteins bind to DNA, non-specifically. IncC1 binds DNA weakly in the absence of nucleotides but IncC2 protein was found to bind DNA only in the presence of nucleotides (ADP, ATP).

Thesis (PhD (Microbiology))--University of Stellenbosch 2010.<br>ENGLISH ABSTRACT: Two isogenic plasmids, pRAS3.1 (11,851-bp) and pRAS3.2 (11,823-bp), were identified as tetracycline resistance plasmids occurring within Aeromonas salmonicida subsp. salmonicida and atypical A. salmonicida subsp. salmonicida strains that were isolated from salmon aquaculture farms in Norway (L'Abee-Lund and Sorum, 2002). Although sequence analysis showed that, except for the repC gene, the replication and mobilization genes of the two pRAS3 plasmids are similar to that of the two IncQ-2 plasmids pTF-FC2 and pTC-F14, incompatibility testing during the course of this study revealed that the replicons of the two pRAS3 plasmids were compatible with the replicons of the IncQ-1α, ß] and y plasmids RSF1010, pIE1107 and pIE1130, as well as with the IncQ-2α and ß plasmids, pTF-FC2 and pTC-F14, respectively. Through sequence analysis it was suggested that the repC gene of the ancestral pRAS3 plasmid was probably acquired during a gene exchange event with a yet to be identified plasmid. The difference in the RepC of the pRAS3 plasmids compared to that of the other IncQ-like plasmids against which the pRAS3 plasmids were tested for incompatibility was thus suggested to be a likely reason for the compatibility of the two pRAS3 plasmid replicons with these IncQ-1 and IncQ-2 plasmids. Two previously unidentified genes, encoding two small 108 and 74-aa proteins distantly related to the PemIK (Bravo et al., 1987; Tsuchimoto et al., 1988) and MazEF (Masuda et al., 1993) TA systems, were found to be present between repB and repA genes of the two pRAS3 plasmids. Cloning of these two genes onto an unstable pOU82-test vector increased the stability of the vector from 35 to 98% after ~72 generations, thus suggesting that like the PasABC and PasAB systems of pTF-FC2 and pTC-F14, these two genes encode proteins which function as a toxin-antitoxin (TA) system. Although located in a similar position on the plasmids, the TA system of the two pRAS3 plasmids and the Pas systems of pTF-FC2 and pTC-F14 are unrelated, suggesting that these two types of TA systems were acquired independently from each other. Based on the sequence similarity and genetic organization of pRAS3 compared to the IncQ-2α and ß] plasmids pTF-FC2 and pTC-F14, respectively, but given that the pRAS3 plasmids were compatible with both pTF-FC2 and pTC-F14, as well as other IncQ-like plasmids, it was suggested that the two pRAS3 plasmids be classified into a new IncQ-2y subgroup. A comparison of the sequences of the two pRAS3 plasmids to each other by L'Abee-Lund and Sorum (2002) revealed that, apart from a number of point mutations within the tetAR tetracycline resistance genes of the two plasmids, the only other differences between them are that pRAS3.1 has 4 tandem copies of 22-bp iteron repeats within its origin of vegetative replication (oriV), and 5 tandem copies of CCCCCG 6-bp repeats near the origin of transfer (oriT), while pRAS3.2 has only three and four copies of each of the two repeated sequences, respectively. As the two pRAS3 plasmids are likely to have arisen from the same ancestor, this raised the question of how the copy numbers of these two different types of repeat sequences affected the ability of pRAS3.1 and pRAS3.2 plasmids to compete within a host cell as well as within a population of host cells, and therefore, why both of these isogenic plasmids have managed to persist in the environment. The plasmid copy numbers (PCN) of pRAS3.1 and pRAS3.2 were estimated to be 45 ± 13 and 30 ± 5 plasmids per chromosome, respectively. By creating a series of pRAS3.1 derivative plasmids with 3 to 7 copies of the 22-bp iterons and 4 or 5 copies of the 6-bp repeats, it was shown that an increase in the number of iterons brought about a decrease in PCN, probably due to an increased ability to bind RepC, while an increase in the number of 6-bp repeats from 4 to 5 brought about an increase in repB transcription, and the higher levels of RepB resulted in an increase in PCN. Thus the reason for pRAS3.1 having a ~1.5-fold higher PCN than pRAS3.2, even though it has 4 x 22-bp iterons compared to the 3 x 22-bp iterons of pRAS3.2, was that it had a higher level of repB transcription due to having 5 x 6-bp repeats in its mobB-mobA/repB promoter region compared to the 4 x 6-bp repeats of pRAS3.2. The differences in the number of iterons and 6-bp repeats, and hence PCN, did not have an effect on the stability of the two wild type (WT) plasmids or their derivatives even when the TA system was neutralized by having a copy of the TA genes present on a vector in trans and it was argued that the relatively high PCN of the two pRAS3 plasmids was sufficient to ensure plasmid stability through random distribution. As the two pRAS3 plasmids were mobilized at similar frequencies difference in PCN and mobB-mobA/repB transcription did not seem to affect their mobilization frequency. When pRAS3.1 and pRAS3.2 were competed intracellularly as coresident plasmids, pRAS3.1 was able to displace pRAS3.2 from 98% of the host cells within ~20 generations. The displacement of pRAS3.2 by pRAS3.1 was found to be as a result of pRAS3.1 having 4 x 22-bp iterons, which enabled pRAS3.1 to titrate of the communal pool of available RepC initiator proteins. Plasmids with 5 or 7 x 22-bp iterons, were however less effective at displacing a plasmid with 3 iterons, and it was speculated that plasmids with more than 4 x 22-bp iterons within their oriV were less successful at initiating replication than was a plasmid with 3 iterons within its oriV. A direct correlation was found between the PCN of a pRAS3 plasmid and the metabolic burden it imposed on its host. Thus pRAS3.1, as a result of its ~1.5-fold higher PCN than pRAS3.2 placed a small but significantly higher (~2.8%) metabolic load on its host compared to pRAS3.2. It was concluded that pRAS3.1 had a competitive advantage over pRAS3.2 when these plasmids were coresident within a single host (as would have been when the two plasmids first diverged from each other) as it was able to displace pRAS3.2. However, as a result of pRAS3.2 having a lower PCN, it placed a smaller metabolic burden on an isogenic host and this resulted in pRAS3.2 having an advantage over pRAS3.1 at the population level. Sequence remnants of pRAS3.2 from horizontal gene transfer suggested that pRAS3.2 was the original pRAS3 plasmid and thus that pRAS3.1 evolved from pRAS3.2. As the pRAS3.1 derivative plasmids that were constructed during the course of this study are likely to have been intermediates in the evolution of pRAS3.1 from pRAS3.2, I was able to speculate on the stepwise evolution of pRAS3.1 from pRAS3.2 based on the characteristics of these plasmids, and thus, how both macro- and microevolutionary events have contributed to the evolution of these two plasmids.<br>AFRIKAANSE OPSOMMING: Die twee isogeniese plasmiede, pRAS3.1 en pRAS3.2, was geidentifiseer as tetrasiklien weerstandbiedende plasmiede wat in Aeromonas salmonicida subsp. salmonicida en nie-tipiese A. salmonicida voorkom (L'Abee-Lund and Sorum, 2002). DNS volgorde analise deur L'Abee-Lund en Sorum (2002) het gewys dat die gene verantwoordelik vir replisering (uitsluitend die repC) en mobililisering naverwant is aan die van twee IncQ-2 plasmiede, pTF-FC2 en pTC-F14. Eksperimente tydens hierdie studie het egter gewys dat die repliserende sisteme van die twee pRAS3 plasmiede versoenbaar is met die repliserende sisteme van die IncQ-1α, ß and y plasmiede RSF1010, pIE1107 en pIE1130, sowel as die IncQ-2α en ß plasmiede, pTF-FC2 and pTC-F14, onderskeidelik. Analise van die aminosuur volgorde van die pRAS3 RepC proteien het gedui daarop dat die proteien taamlik verskil van die RepC proteiene van die naverwante plasmiede pTF-FC2 en pTC-F14, sowel as die van die IncQ-1 tipe plasmiede, en daar was voorgestel dat die voorsaat pRAS3 plasmied moontlik die repC geen bekom het vanaf 'n ander, nog onbekende, plasmied deur middel van horisontale geen uitruiling. Die verskil in die RepC van die pRAS3 plasmiede teenoor die van die ander IncQ plasmiede waarteen hulle getoets was vir onversoenbaarheid, was waarskynlik die rede waarom die pRAS3 plasmiede versoenbaar was met die IncQ-1 en IncQ-2 plasmiede. DNS volgorde analise tydens hierdie studie het die teenwoordigheid van twee, vantevore ongeidentifiseerde, klein 108 en 74 aminosuur proteiene onthul wat ver langs verwant is aan die PemIK (Bravo et al., 1987; Tsuchimoto et al., 1988) en MazEF (Masuda et al., 1993) toksien-antitoksien sisteme. Die gene wat kodeer vir hierdie toksien-antitoksien proteine kom tussen die repB en die repA gene van die twee pRAS3 plasmiede voor. Klonering van die toksien-antitoksien gene van die pRAS3 plasmiede op 'n ander onstabiele plasmied het die stabiliteit van hierdie plasmied verhoog van 35 tot en met 98% na ~72 generasies. Hierdie experiment het dus bevestig dat, soos die PasABC en PasAB sisteme van pTF-FC2 en pTC-F14 onderskeidelik, die twee gene 'n toksien-antitoksien sisteem kodeer wat die stabiliteit van 'n plasmied binne 'n bakteriese populasie kan verbeter. Alhoewel die toksien-antitoksien gene van pRAS3 op 'n soortgelyke posisie op die pRAS3 plasmiede voorkom as wat die pasABC en pasAB gene op hulle onderskeidelike pTF-FC2 en pTC-F14 plasmiede voorkom, is hulle nie verwant nie en dus was dit voorgestel dat die twee tipe toksien-antitoksien sisteme onafhanklik van mekaar verkry is. Aangesien die DNS volgorde en genetiese rangskikking van pRAS3 teenoor die IncQ-2α en ß plasmiede pTF-FC2 en pTC-F14, onderskeidelik, soortgelyk is, asook die feit dat die pRAS3 plasmiede versoenbaar was met pTF-FC2 en pTC-F14, sowel as ander IncQ tipe plasmiede, word dit voorgestel dat die twee pRAS3 plasmiede in 'n nuwe IncQ-2y subgroep ingedeel word. 'n Vergelyking van die DNS volgorde van die twee pRAS3 plasmiede deur L'Abee-Lund and Sorum (2002) het gewys dat, behalwe vir 'n paar puntmutasies binne die tetAR tetrasiklien weerstandsgene, verskil die twee net in die opsig dat pRAS3.1 het 4 agtereenvolgende kopiee van 22-bp 'iteron' herhalings wat gelee is binne sy replikasie oorsprong en 5 kopiee van 'n CCCCCG 6-bp herhaling wat naby sy oorsprong van oordrag gelee is, terwyl pRAS3.2 net 3 en 4 kopiee het van elk van die onderskeie volgorde herhalings. Dus die bestaan van twee plasmiede met verskillende kopiegetalle van die twee verskillende tipe DNA volgorde herhalings, maar wat vermoedelik afkomstig is vanaf dieselfde stam plasmied, bring die volgende oorhoofse vrae aangaande die plasmiede na vore: hoe beinvloed die DNS volgorde herhalings die vermoe van die twee plasmiede om binne 'n enkele gasheersel te kompeteer vir die beskikbare plasmied repliserings masjinerie, en hoe beinvloed dit die plasmied-gasheersel verhouding en dus hulle vermoe om te kompeteer op die populasie vlak, en laastens, hoekom het beide weergawes van die plasmied bly voortbestaan in die omgewing? Die plasmied kopiegetalle van pRAS3.1 en pRAS3.2 was eksperimenteel beraam by ongeveer 45 ± 13 en 30 ± 5 plasmiede per chromosoom in E. coli, onderskeidelik. Deur 'n reeks van pRAS3.1 derivate te skep met 3 tot 7 'iteron' herhalings en 4 of 5 kopiee van die 6-bp herhalings was dit bewys dat 'n toename in die hoeveelheid 'iterons' 'n afname in die plasmied kopiegetal veroorsaak, vermoedelik deur 'n verbeterde vermoe om RepC te bind, terwyl 'n verhoging van 4 tot 5 kopiee van die 6-bp herhaling 'n afname in die kopiegetal te weeg gebring het. Die repB geen van 'n plasmied met 5 x 6-bp herhalings was ~2-voud hoer uitgedruk as die van 'n plasmied met 4 x 6-bp herhalings, en dit was verder bewys dat 'n verhoogde vlak van repB transkripsie vanaf 'n L-arabinose induseerbare promoter in trans van 'n pRAS3 plasmied met 4 x 6-bp herhalings het 'n ~2-voud verhoging in plasmied kopiegetal teweeg gebring. Die rede dat pRAS3.1 'n ~1.5-voud hoer plasmied kopiegetal gehad het as pRAS3.2, was as gevolg van 'n hoer vlak van repB uitdrukking weens die feit dat pRAS3.1 5 x 6-bp herhalings in die mobB-mobA/repB promoter area het terwyl pRAS3.2 net 4 van die 6-bp herhalings in dieslefde posisie het. Sou pRAS3.1 4 x 22-bp 'iterons' gehad het, maar saam met 4 x 6-bp herhalings soos pRAS3.2, dan sou die plasmied kopiegetal 23 ± 2 plasmiede per chromosoom gewees het. Die verskil in die hoeveelheid 'iterons' en 6-bp herhalings, en dus die plasmied kopiegetal, het nie 'n effek op die stabiliteit van die wilde tipe plasmiede of hulle derivate gehad nie, selfs al was die toksien-antitoksien sisteem geneutraliseer deurdat daar 'n kopie van die toksien-antitoksien sisteem op 'n ander plasmied in trans van die pRAS3 plasmiede en hul derivate geplaas was. Die relatiewe hoe plasmied kopiegetal van die pRAS3 plasmiede, wat moontlik hoog genoeg was om plasmied stabiliteit deur middel van toevallige uitdeling te verseker, was voorgestel as die rede vir die hoe mate van plasmied stabiliteit. Soortgelyke frekwensies van mobilisasie vir pRAS3.1 en pRAS3.2 (0.032 ± 0.014 en 0.021 ± 0.013 transkonjugate per donateur, onderskeidelik) was waargeneem. Dus het dit geblyk dat die verskil in uitdrukking van die mobB-mobA/repB operon, sowel as die plasmied kopiegetal van die twee pRAS3 plasmiede, nie die mobiliserings frekwensie beinvloed het nie. Intrasellulere kompetisie tussen pRAS3.1 en pRAS3.2 het gewys dat pRAS3.1 die vermoe gehad om binne ~20 generasies pRAS3.2 vanuit 98% van die gasheerselle te skop. Daar was gewys dat die teenwoordigheid van 4 x 22-bp 'iterons' in die oorsprong van replikasie van pRAS3.1 die rede was vir die vermoe van hierdie plasmied om pRAS3.2 uit te kompeteer binne die gasheersel, moontlik deurdat die 4 x 22-bp 'iterons' beter in staat was om die RepC protein te bind. Die vermoe van plasmiede met 5 of 7 x 22-bp 'iterons' om te kompeteer met 'n plasmied met net 3 x 22-bp 'iterons' was toenemend swakker in vergelyking met die van 'n plasmied met 4 x 22-bp 'iterons', en hierdie waarneming het gelei tot die voorstel dat plasmiede met meer as 4 x 22-bp 'iterons' nie so suksesvol was om replikasie te inisieer soos ¡¥n plasmied met 3 x 22-bp 'iterons' nie. 'n Direkte korrelasie was gevind tussen die plasmied kopiegetal van 'n pRAS3 plasmied en die metaboliese lading wat die plasmied op die gasheersel geplaas het. Dus het pRAS3.1, met 'n plasmied kopiegetal van ~1.5-voud hoer as die van pRAS3.2, 'n effens hoer (~2.8%) metababoliese lading op die gasheersel as pRAS3.2 geplaas. In gevolge van die inter- en intrasellulere kompetiesie eksperimente, was dit ge-argumenteer dat pRAS3.1 'n mededingende voordeel bo-oor pRAS3.2 binne 'n gasheersel (soos wat dit sou gewees het kort nadat die twee plasmiede van mekaar uiteengevloei het) gehad het omdat dit in staat was om pRAS3.2 vanuit die gasheersel te skop. Aan die ander kant het pRAS3.2 'n laer plasmied kopiegetal en dus 'n laer metaboliese lading op die isogeniese gasheersel geplaas het, en daardeur het pRAS3.2 weer op die populasievlak die kompeterende voordeel bo-oor pRAS3.1 gehad. Die eienskappe van pRAS3.2 was meer soortgelyk aan die van ander IncQ-tipe plasmiede as wat die eienskappe van pRAS3.1 was, en dus word dit voorgestel dat pRAS3.1 vanaf pRAS3.2 afkomstig was. Omdat die derivaat plasmiede wat geskep was vanaf pRAS3.1 tydens hierdie studie moontlike tussengangers in die ontwikkeling van pRAS3.1 vanaf pRAS3.2 was, kan gespekuleer word, gebaseer op die eienskappe van hierdie plasmiede, oor die “stapsgewyse manier” waarmee pRAS3.1 vanaf pRAS3.2 ge-evolueer het, en dus hoe beide makro- en mikro-evolusionere gebeurlikhede bygedra het tot die evolusie van genoemde plasmiede.

Antimicrobial resistance (AMR) in Escherichia coli from farm animals, slaughterhouses, and associated environments poses a critical threat to public health and food safety. Several studies have reported that antibiotic resistance genes (ARGs) are found with high prevalence, especially blaCTX-M, mcr-1, tetA and tetB, aac(6′)-Ib, and qnr. These genes were frequently associated with mobile genetic elements (MGEs) such as IncF and IncI plasmids, class 1 integrons, insertion sequences (e.g., IS26), and transposons, which facilitate horizontal gene transfer and adaptation to selective pressures. Comparative analysis indicated that farm animals and slaughterhouse environments act as reservoirs and convergence points for resistant E. coli strains from diverse sources, amplifying the spread of resistance genes. Environmental samples, including wastewater demonstrated a genetic overlap with isolates from farm animals, suggesting that inadequate waste management contributes to AMR propagation that has the potential for zoonotic transmission. This chapter will explain the genetic characteristics of antibiotic-resistant E. coli with a focus on dominant ARGs and MGEs that drive the dissemination of resistance. This information is needed in monitoring the evolution and spread of E. coli ARGs so that appropriate policies and interventions can be implemented to prevent and control antibiotic-resistant E. coli.

Abstract The density of VLSI (very large scale integration) has increased four-fold over the last three years. Drams (dynamic random access memory) are representative semiconductor devices; 64 Mbit Drams are mass produced, their minimum feature length being 0.35 μm. VLSI have a multilayered structure and their minimum feature length shrinks with high integration. Dry etching enables microfabrication with high accuracy to be performed and etching under low-pressure conditions can further aid this demand for accuracy. On the other hand, the diameter of Si wafers is becoming larger (advantageous from the viewpoint of production costs) and although 8-inch diameter wafers are generally used now, 12-inch diameter wafers will be used in the near future. In order to process the large wafer uniformly, dry etching apparatus has evolved from the batch type, which processes multiple wafers at the same time, to leaf type, which processes one wafer at a time. However, a high etching rate is essential to keep the throughput constant. Thus it has become one of the important technological challenges to generate high-density plasmas.

Abstract This chapter expands on phase contrast microscopy and the concept of interferometry. It describes how a modification of the optics can transform the microscope into a shear interferometer, which allows generation of contrast from transparent microscopic samples. The original modification by Smith in the 1950s used two Wollaston prisms to create and then recombine sheared “difference” images to generate high-resolution, high-contrast images of transparent samples. Nomarski then modified the prism to create a more practical version now known as Nomarski differential interference microscopy (DIC). The chapter includes an extensive description of how DIC uses optical path length, polarized light, and interference to create a pseudo 3D image of transparent, isotropic samples. The major problem concerning DIC is its intolerance to birefringent substances, including plastic. This deficiency has been addressed by the invention of the two disparate techniques of PlasDIC (Carl Zeiss, Inc) and Hoffman modulation contrast microscopy. Both of these birefringent-tolerant techniques are discussed toward the end of this chapter.

Abstract The dramatic increase in the power of desk top personal computers coupled with advances in relatively low priced software (as compared to similar software for mainframes) has made it possible for the designer of fiberglass reinforced plastic (FRP) vessels to use advanced techniques which at one time were restricted to aircraft, spacecraft and military projects. A large FRP scrubber vessel 25 ft 7 inch (7.8 m) in diameter, a shell length of 79 ft 5 inch (24.2 m) and a skirt length of 14 ft 9 inch (4.5 m) was designed in accordance with ASME RTP- 1 Subpart 3B with advanced computer software. The vessel was designed using a layer-by-layer Finite Element model. The material properties of the layers and macro layers was calculated using lamination analysis. Layer strengths were determined using in some cases with ASME RTP-1 strain limits and in some cases by laboratory testing. The vessel was field fabricated in Europe for a major US petrochemical company and the project was very successful.

ABSTRACT Atmospheric Plasma Solutions Inc. (APS) partnered with ADV Integrity, Inc. to conduct a testing program to evaluate the impact of atmospheric plasma surface preparation on the performance of composite systems used to repair defects in transmission pipelines. The APS surface treatment system provides a portable solution for coating removal and functionalizes surfaces to increase adhesion of resins/epoxy/coatings to the underlying substrate. Composite repair systems’ performance relies heavily on the levels of adhesion between the initial layer of the composite system and the substrate. Enhanced adhesion translates to improved performance of composite systems due to increased bonding (mechanical and chemical) which improves the load transfer from the substrate to the composite layers. Atmospheric plasma treated surfaces were compared to industry standard surface preparation (NACE-2) and flash-rusted surfaces on commercially available composite repairs systems. All groups were tested to ASTM standards for contact angle wettability; lap shear testing; full-scale leak repair pressure testing; and mechanical testing (tensile and fracture toughness (Charpy V-notch)). Plasma treated surfaces displayed over a 300% increase in pressure cyclic performance compared to industry standard solutions. Additionally, utilizing this solution did not affect the bulk material properties of the metal substrates as shown in tensile and Charpy tests.

Micro-alloyed low-carbon linepipe steels offer an advantageous combination of high toughness and a low carbon equivalent (CE or Pcm) for good weldability. The continuing improvements in pipeline steel manufacturing practices have also led to pipeline steels with higher yield to tensile (Y/T) ratios and a corresponding reduction in strain hardening capacity. Potential users of high Y/T ratio pipeline steels are somewhat reluctant to modify their existing specifications. This is because they do not have the required information to judge the performance characteristics of such steels under a wide range of service conditions. This is not surprising knowing that yielding behaviour, and defect tolerance in particular depends not only on toughness but also on the strain hardening capacity. Therefore, the interaction between toughness and strain hardening capacity (or Y/T) for a successful application of high Y/T ratio linepipe steels must be considered. For the pipe fabricator this means that not only the yield strength of the plate, used to make the pipe, must be carefully controlled, but also that the relationship between the mechanical properties of pipe and plate must be known. This study examined the engineering significance of the yield-to-tensile (Y/T) ratio on yielding behavior and defect tolerance of 1-inch thick X70 steels in plate form. Stress-strain characteristics were measured by tensile testing of standard round-bar, full-section square, and wide-plate specimens. The strained condition was tested to determine the effect of cold forming on the Y/T ratio and yielding behavior. Finally, defect tolerance was determined by testing 8-inch wide notched-plate specimens.

One of the emerging technologies is the use of microbial agents for the control of postharvest diseases of fruits and vegetables. A number of antagonistic microorganisms have been discovered which have the potential to effectively control postharvest diseases. Some of this technology has been patented and commercial products such as AspireTM (Ecogen Corporatin, Langhorne, PA, USA), Biosave 10TM and Biosave 11TM (Ecoscience Inc., Worchester, MA, USA) have been registered for commercial use. The principal investigator of this project was involved in developing the yeast-based biofungicide-AspireTM and testing its efficacy under commercial conditions. This research project was initiated to fill the gap between the knowledge available on development and commercial implementation of yeast biocontrol agents and basic understanding of various aspects related to introducing yeast antagonists to fruit surfaces, along with verification of population genetics. The main objectives of this study were: Study ecology, population dynamics and genetic diversity of the yeast antagonists Candida guilliermondii, C. oleophila, and Debaryomyces hansenii, and study the effect of preharvest application of the yeast antagonist C. oleophila naturally occurring epiphytic microbial population and on the development of postharvest diseases of citrus fruit during storage. Our findings, which were detailed in several publications, have shown that an epiphytic yeast population of grapefruit able to grow under high osmotic conditions and a wide range of temperatures was isolated and characterized for its biocontrol activity against green mold decay caused by Penicillium digitatum. Techniques based on random amplified polymorphic DNA (RAPD) and arbitrary primed polymerase chain reaction (ap-PCR), as well as homologies between sequences of the rDNA internal transcribed spacers (ITS) and 5.8S gene, were used to characterize the composition of the yeast population and to determine the genetic relationship among predominant yeast species. Epiphytic yeasts exhibiting the highest biocontrol activity against P. digitatum on grapefruit were identified as Candida guilliermondii, C. oleophila, C. sake, and Debaryomyces hansenii, while C. guilliermondii was the most predominant species. RAPD and ap-PCR analysis of the osmotolerant yeast population showed two different, major groups. The sequences of the ITS regions and the 5.8S gene of the yeast isolates, previously identified as belonging to different species, were found to be identical. Following the need to develop a genetically marked strain of the yeast C. oleophila, to be used in population dynamics studies, a transformation system for the yeast was developed. Histidine auxotrophy of C. oloephila produced using ethyl methanesulfonate were transformed with plasmids containing HIS3, HIS4 and HIS5 genes from Saccharomyces cerevisiae. In one mutant histidin auxotrophy was complemented by the HIS5 gene of S. cerevisiae is functionally homologous to the HIS5 gene in V. oleophila. Southern blot analysis showed that the plasmid containing the S. cerevisiae HIS5 gene was integrated at a different location every C. oleophila HIS+ transformant. There were no detectable physiological differences between C. oleophila strain I-182 and the transformants. The biological control ability of C. oleophila was not affected by the transformation. A genetically marked (with b-glucuronidase gene) transformant of C. oleophila colonized wounds on orange fruits and its population increased under field conditions. Effect of preharvest application of the yeast C. oleophila on population dynamics of epiphytic microbial population on wounded and unwounded grapefruit surface in the orchard and after harvest was also studied. In addition, the effect of preharvest application of the yeast C. oleophila on the development of postharvest decay was evaluated. Population studies conducted in the orchard showed that in control, non-treated fruit, colonization of wounded and unwounded grapefruit surface by naturally occurring filamentous fungi did not vary throughout the incubation period on the tree. On the other hand, colonization of intact and wounded fruit surface by naturally occurring yeasts was different. Yeasts colonized wounded surface rapidly and increased in numbers to about two orders of magnitude as compared to unwounded surface. On fruit treated with the yeast and kept on the tree, a different picture of fungal and yeast population had emerged. The detected fungal population on the yeast-treated intact surface was dramatically reduced and in treated wounds no fungi was detected. Yeast population on intact surface was relatively high immediately after the application of AspireTM and decreased to than 70% of that detected initially. In wounds, yeast population increased from 2.5 x 104 to about 4x106 after 72 hours of incubation at 20oC. Results of tests conducted to evaluate the effect of preharvest application of AspireTM on the development of postharvest decay indicated the validity of the approach.

In the early 1970's, the Pipeline Research Council International, Inc.(PRCI) developed a failure criterion for pipes that had a predominately empirical basis. This criterion was based on flaw sixes that existed prior to pressurization and did not address possible growth due to the pressure in service or in a hydrostatic test or during the hold time at pressure in a hydrotest. So long as that criterion was used within the scope of the underlying database and empirical calibration, the results of its predictions were reasonably accurate. However, with the advent of newer steels and the related increased toughness that supported significant stable flaw growth, it became evident that this criterion should be updated. This updating led to the PRCI ductile flaw growth model (DFGM) that specifically accounted for the stable growth observed at flaws controlled by the steel's toughness and a limit-states analysis that addressed plastic-collapse at the flaw. This capability provided an accurate basis to assess flaw criticality in pipelines and also the means to develop hydrotest plans on a pipeline specific basis. Unfortunately, this enhanced capability came at the expense of increased complexity that made this new capability difficult to use on a day-today basis. To counter this complexity, this capability has been recast in the form of a PC computer program. Benefit: This topical report contains the computer program and technical manual for a failure criterion that will predict the behavior of an axially oriented, partially through the wall flaw in a pipeline. The model has been given the acronym PAFFC which stands for Pipe Axial Flaw Failure Criteria. PAFFC is an extension of a previously developed ductile flaw growth model, L51543, and can account for both a flaw's time dependent growth under pressure as well as its unstable growth leading to failure. As part of the output, the user is presented with a graphical depiction of the flaw sizes in terms of combinations of flaw length and depth, that will fail (or survive) a given operating or test pressure. As compared to existing criteria, this model provides a more accurate prediction of flaw behavior for a broad range of pipeline conditions.

This report describes the vegetation mapping procedures employed by the Center for Remote Sensing and Mapping Science (CRMS), Department of Geography, University of Georgia, for the Big South Fork National River and Recreation Area (BISO) in the Appalachian Highlands Inventory and Monitoring Network (APHN) of the National Park Service under Cooperative Agreement No. H5028 01 0651, entitled, ?Digital Vegetation Databases and Maps for National Park Service Units in the Appalachian Highlands and Cumberland/ Piedmont Networks?. Big South Fork National River and Recreation Area (BISO) is located in the Cumberland Plateau of north central Tennessee and southern Kentucky. Encompassing a total area of 113,661acres (45,997 hectares), BISO is a rugged area carved from sandstone and shale, and filled with river gorges, steep cliffs, and unique sandstone arches. Using the National Vegetation Classification System (NVCS) developed by NatureServe, with additional classes and modifiers developed by CRMS, the vegetation communities for BISO were manually interpreted from 1:16,000 scale stereo color infrared aerial photographs acquired by Air Photographics, Inc. (Martinsburg, WV) in October 2003. Although the legislated area of BISO is 113,661 acres, the total area mapped was 122,368 ac (49,520 ha) and corresponds to the boundary file provided by the park. In addition, a 22,660 ac (9,170 ha) buffer area, extending 400 m outside of the park was mapped using a more general classification system meaning the total area mapped for BISO was 145,028acres (58,793 ha). Using a minimum mapping unit of 0.5 hectares (MMU = 0.5 ha), polygons representing areas of relatively uniform vegetation were delineated and annotated on clear plastic overlays registered to the aerial photographs. Polygons were labeled according to the dominant vegetation community. Where the polygons were not uniform, second and third vegetation classes were added. A number of modifier codes were employed to indicate important aspects of the polygon that could be interpreted from the photograph. The polygons on the overlays were then corrected using photogrammetric procedures and converted to vector format for use in creating a geographic information system (GIS) database for the park. High resolution color orthophotographs were created from the original aerial photographs for use in the GIS. Upon completion of the GIS database (including vegetation, orthophotos and updated roads and hydrology layers), both hardcopy and softcopy maps were produced for delivery.