Relevant bibliographies by topics / Inclined outlets

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Inclined outlets'

Author: Grafiati
Published: 4 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Inclined outlets.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Inclined outlets"

1

Villagrán Olivares, Marcela C., Jesica G. Benito, Rodolfo O. Uñac, and Ana M. Vidales. "Towards a one parameter equation for a silo discharging model with inclined outlets." Powder Technology 336 (August 2018): 265–72. http://dx.doi.org/10.1016/j.powtec.2018.06.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

De Bruycker, Iskander, and Matthijs Rooduijn. "The People’s Champions? Populist Communication as a Contextually Dependent Political Strategy." Journalism & Mass Communication Quarterly 98, no. 3 (2021): 896–922. http://dx.doi.org/10.1177/1077699021998648.

Full text
Abstract:
This article conceives of populist communication as a contextually dependent political strategy. We bridge actor- and communication-centered approaches by arguing that the context of issues conditions the extent to which parties employ populist communication. We draw from a content analysis of 2,085 news stories in eight news media outlets and Eurobarometer data connected to 41 EU policy issues and analyze statements from 85 political parties. Our findings show that populist parties are more prone to express populism on salient and polarized issues. Issues important to civil society groups, in
APA, Harvard, Vancouver, ISO, and other styles
3

Mohamed, M. A., H. M. Soliman, and G. E. Sims. "Experimental investigation of two-phase flow splitting in an equal-sided impacting tee junction with inclined outlets." Experimental Thermal and Fluid Science 35, no. 6 (2011): 1193–201. http://dx.doi.org/10.1016/j.expthermflusci.2011.04.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baghaei, Masoud, and Josep M. Bergada. "Analysis of the Forces Driving the Oscillations in 3D Fluidic Oscillators." Energies 12, no. 24 (2019): 4720. http://dx.doi.org/10.3390/en12244720.

Full text
Abstract:
One of the main advantages of fluidic oscillators is that they do not have moving parts, which brings high reliability whenever being used in real applications. To use these devices in real applications, it is necessary to evaluate their performance, since each application requires a particular injected fluid momentum and frequency. In this paper, the performance of a given fluidic oscillator is evaluated at different Reynolds numbers via a 3D-computational fluid dynamics (CFD) analysis. The net momentum applied to the incoming jet is compared with the dynamic maximum stagnation pressure in th
APA, Harvard, Vancouver, ISO, and other styles
5

Jaiyeoba, Olumide Olasimbo, and Frederick Odongo Opeda. "Impact of Consumer Innovativeness on Shopping Styles: A Case-Study of Limkokwing University Students (Botswana)." Business and Management Horizons 1, no. 2 (2013): 107. http://dx.doi.org/10.5296/bmh.v1i2.4733.

Full text
Abstract:
The unprecedented abundance of choice and retail outlets creates a massive array of choice for consumers most especially students. Innovative consumers are an important market segment. This paper seeks to investigate whether consumers’ innate innovativeness is associated with their shopping styles. Specifically, it aims to explore the relationship between two types of innovativeness (sensory innovativeness and cognitive innovativeness and consumer shopping styles). Indeed, the unprecedented abundance of choice and retail outlets creates a massive array of choice for consumers. Despite these si
APA, Harvard, Vancouver, ISO, and other styles
6

Yuhan, Lu, Weng Miao cheng, and Liu Fang. "Numerical simulation on the characteristics of smoke exhaust effect with different sets of smoke vent in deep buried inclined channel fire." E3S Web of Conferences 252 (2021): 02050. http://dx.doi.org/10.1051/e3sconf/202125202050.

Full text
Abstract:
Deep buried metro stations require longer and more inclined exit passages to connect with the outside. The fire characteristics of these inclined and narrow passages are significantly different from those of above-ground or shallow buried metro station exit passages, and at the same time fires in those inclined channels have a greater risk. This paper takes a channel of deep buried tunnel station in Chongqing as an example and simplifies the actual passage to establish a 3D model to study the smoke spread characteristics along the passage with different smoke vent characteristics including sha
APA, Harvard, Vancouver, ISO, and other styles
7

Ravn-Højgaard, Signe, Valgerður Jóhannsdóttir, Ragnar Karlsson, Rógvi Olavson, and Heini í. Skorini. "Particularities of media systems in the West Nordic countries." Nordicom Review 42, s2 (2021): 102–23. http://dx.doi.org/10.2478/nor-2021-0020.

Full text
Abstract:
Abstract This study compares the media systems of the West Nordic countries, namely the Faroe Islands, Greenland, and Iceland. All three countries are democratic welfare states with considerable institutional transfer from the larger Nordic countries. It is argued that the West Nordic media systems fit into the “Nordic model” when it comes to the perception of media as cultural institutions as well as the central role of public service media. On the other hand, the micro-size of the media systems in the West Nordic countries makes them vulnerable, and makes editorial independence more difficul
APA, Harvard, Vancouver, ISO, and other styles
8

Huang, Haifeng, and Yao-Yuan Yeh. "Information from Abroad: Foreign Media, Selective Exposure and Political Support in China." British Journal of Political Science 49, no. 2 (2017): 611–36. http://dx.doi.org/10.1017/s0007123416000739.

Full text
Abstract:
What kind of content do citizens in a developing and authoritarian country like to acquire from Western free media? What are the effects of their potentially selective exposure? In a survey experiment involving 1,200 Chinese internet users from diverse socio-demographic backgrounds, this study finds that Chinese citizens with higher pro-Western orientations and lower regime evaluations are more inclined to read content that is positive about foreign countries or negative about China. More importantly, reading relatively positive foreign media content about foreign countries can improve rather
APA, Harvard, Vancouver, ISO, and other styles
9

Mwita, James. "Fake News and Propaganda in Political Communication: Effects and Remedies." East African Journal of Interdisciplinary Studies 2, no. 1 (2020): 149–56. http://dx.doi.org/10.37284/eajis.2.1.244.

Full text
Abstract:
Fake news has dominated the media debate the world over in recent times. Fake news is used in political discourses to portray the opponent as inefficient, alienated, outsider etc. Kenya had her election on August 8, 2017, during which time the campaigns were somehow dominated by fake news and propaganda. The Kenyan campaigns were highly polarized and fake news and propaganda were rive in the media; both new and traditional media. In the past elections in Kenya, months leading to elections since the 1980s have been highly charged leading to actual harm; in most cases ethnically and gender incli
APA, Harvard, Vancouver, ISO, and other styles
10

Singer, Nermeen. "CORONAVIRUS MEDIA DISCOURSE AND CURRENT SITUATION (QCA FOR DIFFERENT RESPONSES TO COMBAT COVID-19)." Humanities & Social Sciences Reviews 8, no. 3 (2020): 665–75. http://dx.doi.org/10.18510/hssr.2020.8371.

Full text
Abstract:
Purpose of the study: Given the immense spread of the Coronavirus disease, it is imperative to note how the leaders and governments approach the issue and the suggestions made to protect the people and not spread panic.
 Methodology: The study incorporates scrutiny of the available online media with official statements and news outlets made by state officials and leaders. Thus, one can note the implementation of qualitative comparative analysis to determine the difference in the attitudes and approaches of various world leaders to combat the disease. 
 Main Findings: Most world leade
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Inclined outlets"

1

Mohamed, Moftah. "Phase redistribution and separation of gas-liquid flows in an equal-sided impacting tee junction with a horizontal inlet and inclined outlets." 2012. http://hdl.handle.net/1993/9142.

Full text
Abstract:
Phase-redistribution and full-phase separation data were generated for two-phase (air-water) flow splitting at an equal-sided impacting tee junction with a horizontal inlet and inclined outlets. The flow loop incorporated a tee junction machined in an acrylic block with the three sided having an equal diameter of 13.5 ± 0.1 mm I.D. Both sets of experiments were conducted at a nominal pressure (Ps) of 200 kPa (abs) and near-ambient temperature (Ts). The operating conditions for the phase-redistribution experiments were as follows: inlet superficial liquid velocities (JL1) ranging fro
APA, Harvard, Vancouver, ISO, and other styles
2

Yu, Kuo-Chuan, and 余國全. "Numerical Study of Changing Blade-Outlet-Angles on the performance of a Small Backward-Inclined Centrifugal Pump." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/87996677059518199196.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>機械工程系<br>93<br>Abstract Pump is widely used to the fluid transportation in the industry. Recently, the small centrifugal pump has drawn increasing attention on its application in the design of artificial heart. There is a substantial need to realize the flow patterns and shear-stress distribution generated by the pump for a safe application on human body. Therefore, this work aims at the application of the numerical code to simulate the associated flow field inside a small BI centrifugal pump. The numerical outcomes are utilized for the flow visualization to identify the pos
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Inclined outlets"

1

Rostow, W. W. "Relative Prices." In The Great Population Spike and After. Oxford University Press, 1998. http://dx.doi.org/10.1093/oso/9780195116915.003.0008.

Full text
Abstract:
In viewing the time ahead, especially the next quarter century, I have been inclined to conclude that the industrial progress of India, China, Southeast Asia, and the major countries of Latin America are likely to produce a phase of rising prices in foodstuffs and raw materials and increased outlays to deal with the forces of environmental degradation. It is my hypothesis that for a time, in the early part of the 21st century, these developments will outstrip the deceleration of population. The more or less regular occurrence of such phases of demand pressure has marked the story of the world economy since the end of the 18th century. At least since about 1789, there have been successive periods when foodstuffs and raw materials were expensive and then cheap, relative to manufactured goods. From 1789 to 1920, these periods lasted about 25 years. After 1920, the cycles were much less regular and were significantly affected by wars, by the successive rise in the importance of oil, by outlays to preserve the environment, and finally by the involvement more directly of politics in the setting of basic prices. But economic historians are likely to agree that the period 1789-1914 was marked by two-and-a-half long relative-price cycles in raw material versus manufactured goods (see Figure 4.1). Although he had several predecessors, N. D. Kondratieff, a Russian economist who was immortalized by Joseph Schumpeter as the discoverer of the Kondratieff cycle or long wave, identified, dated, and discussed analytically this long cycle in the interwar years. He died in one of Joseph Stalin's labor camps in Siberia. The approximate dates and length of these long cycles through 1920 are shown in Table 4.1. The successive phases of falling and rising relative prices continued to follow one another despite two world wars, a pathological interwar period, and an unexpected postwar recovery, illustrated in Table 4.2. The peak of the early 1980s came in the second quarter of 1982 (or, on an annual basis, in 1981).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Inclined outlets"

1

Mohamed, M. A., H. M. Soliman, and G. E. Sims. "The Effect of Outlet Inclination on Two-Phase Flow Splitting in an Equal-Sided Impacting Tee Junction." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22265.

Full text
Abstract:
Phase-distribution data have been generated for two-phase (air-water) flow splitting at an impacting tee junction with a horizontal inlet and inclined outlets. This investigation also considers the full-separation capabilities of the junction and the effect of the outlet angle of inclination on partial separation at various inlet conditions. A flow loop with the ability to incline the outlets from −90° downward to +90° upward was constructed. The operating conditions were as follows: test-section inside diameter of 13.5 mm, nominal junction pressure (Ps) of 200 kPa (abs), near ambient temperat
APA, Harvard, Vancouver, ISO, and other styles
2

Longmire, E., D. Webster, D. Gefroh, et al. "The effect of inclined outlet geometry on vortex rings." In 4th Shear Flow Control Conference. American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-2062.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Oguntade, Habeeb Idowu, Gordon E. Andrews, Alan Burns, Derek Ingham, and Mohammed Pourkashanian. "CFD Predictions of Single Row Film Cooling With Inclined Holes: Influence of Hole Outlet Geometry." In ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-22308.

Full text
Abstract:
A CFD investigation of a single row of round inclined film cooling holes in a crossflow has been carried out with the view of investigating the discrepancies in the literature between predicted and measured results. The experimental results of Sinha et al. [1], Kohli et al. [40], Pedersen et al. [3] and others form the data base for validation of the CFD prediction of film cooling. Previous work in the literature is reviewed to show that CFD has had difficulty in obtaining agreement with these basic experimental film cooling results. However, most previous work has used tetrahedral meshes whic
APA, Harvard, Vancouver, ISO, and other styles
4

Oguntade, H. I., G. E. Andrews, A. D. Burns, D. B. Ingham, and M. Pourkashanian. "Conjugate Heat Transfer Predictions of Effusion Cooling With Shaped Trench Outlet." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-25257.

Full text
Abstract:
The influence of the application of a filleted shape trench hole outlet on the overall cooling effectiveness of a flat hot effusion Nimonic 75 metal wall with a 770K hot gas crossflow was investigated using conjugate heat transfer (CHT) CFD and the Ansys Fluent code. The baseline effusion wall had ten rows of holes with an X/D of 4.65 and a wall thickness of 6.35mm with normal injection holes. This was modelled and showed good agreement with the experimental results for overall cooling effectiveness. The aim of the work was to use these validated CHT CFD procedures to investigate improved hole
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Bo, and Akira Nakajima. "Accumulation Process of Liquid-Like Chemicals on the Air Bearing Surface of a Slider in Hard Disk Drives." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63391.

Full text
Abstract:
The pumping effect which is proposed by the authors to explain the accumulation of liquid-like chemicals on the air bearing surface has been analyzed by taking into the account the incline of the air bearing surface. Numerical results show that the accumulation rate of the contaminant decreases as the incline of the air bearing surface increases and at the same time the maximum adsorbed film thickness shifts from the outlet to the inner surface.
APA, Harvard, Vancouver, ISO, and other styles
6

Dinh, Thien X., and Yoshifumi Ogami. "An Integration of Micropump and Micromixer." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10992.

Full text
Abstract:
In this paper, an one-layer valveless micropump which can work as a micromixer is numerically studied. The micropump consists of a pump chamber, a neck channel, an outlet channel which is perpendicular with the two opposite inlet channels. A side of the pump chamber is enclosed by a vibrating diaphragm which deforms volume of the pump chamber with time, then excites the flow from the inlet to the outlet of the pump. The attained flow rate at the outlet shows the advance of the present micropump in comparison with conventional nozzle-diffuser micropumps. The mixing performance of the devices is
APA, Harvard, Vancouver, ISO, and other styles
7

Bianco, Vincenzo, Bernardo Buonomo, Alessandra Diana, Oronzio Manca, and Sergio Nardini. "Numerical Investigation on Thermal and Fluid Dynamics Behaviors of the Exit Section Effect in Inclined Ventilated Roofs." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67431.

Full text
Abstract:
One of the most important requirements for building performance is energy saving and recovering and they are chased developing new strategies for the reduction of energy consumption, due to the heat flux transmitted through buildings envelopes. This work examines a prototypal ventilated roof numerically using a two-dimensional model in Ansys Fluent. Only a single flap of the roof is analyzed because its structure is geometrically and thermally symmetrical. The objective of this work is to study the thermal and fluid dynamic behaviors of a ventilated roof for different configurations of the exi
APA, Harvard, Vancouver, ISO, and other styles
8

Hay, N., D. Lampard, and A. Khaldi. "The Coefficient of Discharge of 30° Inclined Film Cooling Holes With Rounded Entries or Exits." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-180.

Full text
Abstract:
The coefficients of discharge of 30° inclined holes having a length to diameter ratio of 6, and rounded entries or exits have been measured for a range of crossflow conditions. The rounding radius varied from 0 to 1 hole diameters, and the crossflow Mach numbers from 0 to 0.5. Rounding the hole inlet was found to be beneficial, with increases of up to 15% being obtained at high coolant (inlet) side crossflow Mach numbers. Rounding the exit produced no significant benefit. The crossflow effects have been correlated using inlet and outlet additive loss coefficients. These reflect the changes in
APA, Harvard, Vancouver, ISO, and other styles
9

Ma, Sang-Bum, and Kwang-Yong Kim. "Aerodynamic Performances of a Centrifugal Compressor With Discrete Cavities." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63535.

Full text
Abstract:
In this study, aerodynamic performance of the centrifugal compressor was investigated by using a recirculating device called discrete cavities. A parametric study was conducted using six parameters related to the geometry of the discrete cavities, i.e., the inclined angle, the port angle and width, the length of cavity, the axial location of each cavity, and the number of cavities. Three-dimensional Reynolds-averaged Navier-Stokes equations with shear stress transport turbulence model were used for aerodynamic analysis of the centrifugal compressor with discrete cavities. The hexahedral grid w
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Tongsheng, Zhu Huang, Zhongguo Sun, and Guang Xi. "Numerical Simulation of Mixed Flow Past an Inclined Square Cylinder Using a Local Radial Basis Function Method." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-5196.

Full text
Abstract:
Abstract Unsteady mixed convective heat transfer flow past an inclined square cylinder is numerically investigated using a local multi-quadric radial basis function (MQRBF) interpolation. The blockage parameter (ratio of square cylinder length d to height of the computational domain H) varies from 0.025 to 0.2. Air is considered as the working fluid and Prandtl number is fixed at 0.71. Richardson number generally affects the heat transfer efficiency ranging from 0 to 20. Inclined angle of square cylinder ranges from 0° to 45°. The inlet flow is assumed to be laminar and uniform. At the outlet
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Inclined outlets' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography