Relevant bibliographies by topics / Inconel625

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Inconel625'

Author: Grafiati
Published: 7 July 2024
Last updated: 19 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Inconel625.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Inconel625"

1

Ding, Yuhang, Wenya Bi, Cheng Zhong, Tao Wu, and Wanyuan Gui. "A Comparative Study on Microstructure and Properties of Ultra-High-Speed Laser Cladding and Traditional Laser Cladding of Inconel625 Coatings." Materials 15, no. 18 (2022): 6400. http://dx.doi.org/10.3390/ma15186400.

Full text
Abstract:
In this study, ultra-high-speed laser cladding (UHSLC) and traditional low-speed laser cladding (LSLC) were employed to prepare high-quality Inconel625 coatings on 27SiMn substrates. UHSLC has cladding speeds of 30 m/min, which are 15 times faster than those of LSLC, and it produces a much greater cladding efficiency, which is 13.9 times greater than LSLC. The microstructure of the Inconel625 coatings was investigated in detail utilizing field emission scanning electron microscopy (FESEM) and electron probe microanalyzer (EPMA). According to the FESEM results, UHSLC Inconel625 coatings have mo
APA, Harvard, Vancouver, ISO, and other styles
2

Ma, Hong, Shu Zhong Wang, Mei Gao, and Sheng Wen. "Research on the Corrosion Behavior of Nickel Base Alloy in Municipal Sludge Treated by Supercritical Water Oxidation." Advanced Materials Research 1010-1012 (August 2014): 220–24. http://dx.doi.org/10.4028/www.scientific.net/amr.1010-1012.220.

Full text
Abstract:
The corrosion behavior of Nickel base alloy was studied in municipal sludge treated by supercritical water oxidation (SCWO). The results showed that the corrosion rate of Nickel-base alloy Inconel600 in the temperature zone under 460°C is smaller, the surface oxide were mainly Cr2O3. The corrosion rate of Nickel-base alloy Inconel625 in the supercritical temperature zone is smaller, it formed more easily protective layers containing element Ni (main containing NiO and Ni (OH)2) and had good heat resistance at higher temperature.
APA, Harvard, Vancouver, ISO, and other styles
3

Minemura, Y., Y. Kondoh, H. Funakubo, and Hiroshi Uchida. "One-Axis-Oriented Crystal Growth of Lead Zirconate Titanate Thin Films on Metal Substrates Using Perovskite-Type Oxide Nanosheet Layer." Key Engineering Materials 582 (September 2013): 15–18. http://dx.doi.org/10.4028/www.scientific.net/kem.582.15.

Full text
Abstract:
One-axis-oriented Pb (Zr,Ti)O3(PZT) films were fabricated using a chemical solution deposition technique on (111)Pt/TiO2/(100)Si and Inconel625 substrates buffered by nanosheet Ca2Nb3O10(ns-CN). The (001)-oriented PZT crystals (Zr/Ti=0.40:0.60, tetragonal) were preferentially grown on (001)ns-CN/Inconel625, whereas the PZT crystals deposited on (001)ns-CN/(111)Pt/ TiO2/(100)Si exhibited preferential PZT(100) orientation. The resulting PZT film on (001)ns-CN/Inconel625 indicated remanent polarization of approximately 59 μC/cm2, which was significantly larger than that on (001)ns-CN/(111)Pt/TiO2
APA, Harvard, Vancouver, ISO, and other styles
4

Chumaevsky, A. V., A. O. Panfilov, K. N. Kalashnikov, et al. "Production of metal matrix composites based on aluminum-manganese bronze and nickel alloys by wire feed electron-beam additive manufacturing." Diagnostics, Resource and Mechanics of materials and structures, no. 6 (December 2022): 65–75. http://dx.doi.org/10.17804/2410-9908.2022.6.065-075.

Full text
Abstract:
Samples of composite materials based on BrAMts9-2 bronze with the introduction of the Udimet500 and Inconel625 nickel alloys were obtained by wire-feed electron-beam technology. The studies show that the structures of composites formed during printing, although fairly similar due to the same base of the alloys, have different features due to different combinations of alloying elements. The mechanical properties of the samples with the introduction of up to 15 % of the Udimet500 alloy are higher than those of the samples of the second material. With the introduction of 25 % of a nickel alloy, t
APA, Harvard, Vancouver, ISO, and other styles
5

Jia, Zhi, Zexi Gao, Jinjin Ji, Dexue Liu, Tingbiao Guo, and Yutian Ding. "Study of the Dynamic Recrystallization Process of the Inconel625 Alloy at a High Strain Rate." Materials 12, no. 3 (2019): 510. http://dx.doi.org/10.3390/ma12030510.

Full text
Abstract:
High-temperature compression and electron backscatter diffraction (EBSD) techniques were used in a systematic investigation of the dynamic recrystallization (DRX) behavior and texture evolution of the Inconel625 alloy. The true stress–true strain curves and the constitutive equation of Inconel625 were obtained at temperatures ranging from 900 to 1200 °C and strain rates of 10, 1, 0.1, and 0.01 s−1. The adiabatic heating effect was observed during the hot compression process. At a high strain rate, as the temperature increased, the grains initially refined and then grew, and the proportion of h
APA, Harvard, Vancouver, ISO, and other styles
6

Mattli, Manohar Reddy, Adnan Khan, Penchal Reddy Matli, et al. "Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites." Materials Today Communications 25 (December 2020): 101564. http://dx.doi.org/10.1016/j.mtcomm.2020.101564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ma, Hong Fang, Ming Zhu, Qing Zhu, and Yan Li. "Corrosion Behaviors of Thermal Diffusion Coating on the Surface of Inconel625 Alloy in Chloride Molten Salts." Materials Science Forum 809-810 (December 2014): 589–95. http://dx.doi.org/10.4028/www.scientific.net/msf.809-810.589.

Full text
Abstract:
In solar thermal storage system, the mixed chloride molten salt with the higher conversion efficiency than a single molten salt, but they are more corrosive than the often used nitride molten salts. In the presents work, aluminide and chromate coating were prepared on the surface of Inconel625 alloy by thermal packing method. The corrosion behaviors of thermal diffusion coating on the surface of Inconel625 alloy in mixed molten salts at 900°C were studied by using XRD and SEM equipped with EDS in the present work. The results showed that both of the two thermal diffusion coatings have sever co
APA, Harvard, Vancouver, ISO, and other styles
8

Dosta, Sergi, Nuria Cinca, Alessio Silvello, and Irene G. Cano. "Alumina Reinforcement of Inconel 625 Coatings by Cold Gas Spraying." Metals 10, no. 9 (2020): 1263. http://dx.doi.org/10.3390/met10091263.

Full text
Abstract:
Reinforced Inconel625 coatings have been successfully deposited by means of cold gas spray (CGS). Alumina has been simultaneously sprayed achieving a homogeneous distribution along the deposit with good cohesion between particles. The aim of this study was to investigate whether ceramic reinforcement could improve the mechanical and tribological properties of Inconel625 cold-sprayed coatings, while keeping the oxidation and corrosion resistance capacity. Furthermore, alumina particles were found to improve the spraying feasibility, by avoiding WC nozzle clogging during the process. A proper op
APA, Harvard, Vancouver, ISO, and other styles
9

Zheng, Chuan Lin, Fu Zhai Cui, Qing Ling Feng, Z. Xu, Xi Shan Xie, and Zhi Yong He. "Oxidation Resistance of TiAl-Inconel625 Graded Alloying Layer." Materials Science Forum 423-425 (May 2003): 81–84. http://dx.doi.org/10.4028/www.scientific.net/msf.423-425.81.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hwang, Ye-Han, Choon-Man Lee, and Dong-Hyeon Kim. "The Effects of the Variable-Pressure Rolling of a Wire Arc Additively Manufactured Inconel625-SS308L Bimetallic Structure." Applied Sciences 13, no. 18 (2023): 10187. http://dx.doi.org/10.3390/app131810187.

Full text
Abstract:
The superior deposition rates of Wire Arc Additive Manufacturing (WAAM) allow for the production of a substantial number of parts while reducing the time and cost associated with machining, and have attracted significant attention. This study focused the microstructural and mechanical properties of a bimetallic thin-wall composed of SS308L and Inconel625, manufactured using variable-pressure rolling WAAM. A detailed analysis of the cross-sectional microstructure of the bi-metallic wall of non-pressure cases revealed a columnar solidification structure. In contrast, the pressured case was domin
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Inconel625"

1

Contri, Boris. "Procédés d’assemblages céramique – métal : étude des couples Inconel®625 – Alumine et Titane Zirconium Molybdène (TZM) – Carbure de silicium." Electronic Thesis or Diss., Limoges, 2023. http://www.theses.fr/2023LIMO0093.

Full text
Abstract:
Ces travaux de thèses ont pour objectif de présenter les résultats obtenus sur l'assemblage de deux couples de matériaux métal - céramiques par thermocompression : Inconel®625 / Alumine et TZM / Carbure de silicium. Elle se place dans la continuité des résultats obtenus sur des assemblages similaires, au sein du laboratoire IRCER, en étudiant la faisabilité de liaisons direct et de liaison après préoxydation de la partie métallique. Une partie est dédiée à la compréhension du mécanisme d’oxydation de l’inconel®625 en utilisant une thermobalance à insertion à chaud. A l’aide des cinétiques obte
APA, Harvard, Vancouver, ISO, and other styles
2

HUANG, QING-ZHOU, та 黃慶州. "添加劑輔助之Inconel617大間隙硬銲". Thesis, 1993. http://ndltd.ncl.edu.tw/handle/41363590531383765288.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sweta, Saroj. "Deposition of TiC-INCONELl825 Composite Coating on AISI 304 Steel By TIG Cladding Process." Thesis, 2017. http://ethesis.nitrkl.ac.in/8979/1/2017_MT_SSaroj.pdf.

Full text
Abstract:
TiC reinforced Inconel825 based hard and wear resistance composite coating was fabricated on AISI 304 steel by TIG cladding process utilizing in-house prepared Inconel825 powder from the discarded chip of turning operation and commercial TiC powder. The proposed coatings have inordinate potential applications, where resistance against wear and corrosion are the foremost requirement. The TiC concentration, preplaced layer thickness and processing current have found significant influence on the microstructure of the produced TiC-Inconel825 composite coating and consequently its mechanical perfor
APA, Harvard, Vancouver, ISO, and other styles
4

Su, Jiun-Shiang, and 蘇俊祥. "Measurement of resistance ohm value parameters at both ends of a nickel-based alloy (INCONEL601) cable wire connector using crimping and argon welding." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/hwy9zg.

Full text
Abstract:
碩士<br>元智大學<br>機械工程學系<br>105<br>The function of the cable conductor, the importance of the relevant industry, like the blood vessels in the human body, is a transport organ. For electrical, electrical, telecommunications, mechanical and industrial engineering industry, as long as the need to use the place to live, the cable is a cable can not be missing transmission [1]. Cable wires are roughly divided into two categories: the first type of classification, the second to the classification of the composition of the wire. The first type of appearance can be divided into four categories: a bare wi
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Inconel625"

1

Sun, Deshun, Xingzhi Jiang, Jianzhong Shi, Jianhua Huang, and Yongzhong Jiang. "Hot Forging Behavior of Inconel625 Superalloy Based on Processing Map." In High Performance Structural Materials. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0104-9_67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vemanaboina, Harinadh, R. Gopi Chandh, P. Sivakrishna, A. Kishore Kumar, K. Malli Karjuna, and Y. Sailinga Reddy. "A X-Ray Diffraction Study of Residual Stresses Due to Multipass Welding of INCONEL600." In Advances in Lightweight Materials and Structures. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7827-4_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Min, Zeng Da Zou, Si Li Song, and Xin Hong Wang. "Effect of Interlayer Thickness on Strength and Fracture of Si3N4 and Inconel600 Joint." In Key Engineering Materials. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.2435.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yuan, Xuemin, Shengju Yang, Qian Zhen, and Zhonglei Zhao. "Discussion on Smelting Technology of Inconel600 Nickel-Ferrochrome Alloy." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220417.

Full text
Abstract:
This paper introduced the smelting process of Inconel600 nickel-ferrochrome alloy by medium frequency induction furnace. The smelting, forging, rolling and drawing process parameters of the alloy are determined by this study. By using nitrogen and oxygen analyzer, direct reading spectrometer, OEM, electronic probe and electronic universal material testing machine, the chemical composition, gas content, inclusions, internal microstructure, mechanical properties and fracture morphology of the trial-produced products were analyzed. The results show that the Inconel600 nickel-ferrochrome product meets the national standard and the comprehensive performance of the product is good.
APA, Harvard, Vancouver, ISO, and other styles
5

Morozov Maxim, Rubinacci Guglielmo, Tamburrino Antonello, Ventre Salvatore, and Villone Fabio. "Toward the Reconstruction of Stress Corrosion Cracks Using Benchmark Eddy Currents Signals." In Studies in Applied Electromagnetics and Mechanics. IOS Press, 2008. https://doi.org/10.3233/978-1-58603-896-0-179.

Full text
Abstract:
This paper concerns numerical modelling of stress corrosion cracks in Inconel600 plates using experimental data of benchmark eddy current measurements. The problem is considered from a broad perspective, in view of its integration with algorithms for solving the inverse problem. The accuracy and efficiency have been particularly considered. The computational technique applied for modeling the crack is based on an integral formulation of the eddy current problem. The cracks are treated as either penetrable volumetric or zero-thickness (surface) defects enabling some electric current flowing through them. Real stress corrosion crack have been considered in this study where measured and simulated eddy current signals due to the cracks are presented.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Inconel625"

1

Vemanaboin, Harinadh, A. R. Babu, B. Vishnu Vardhana Naidu, and R. Raman Goud. "Distortion distribution in CO2 laser beam welds of SS316L to INCONEL625 plates." In INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS SCIENCE, STRUCTURES, AND MANUFACTURING. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0168195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Yu-Cai, Wenchun Jiang, Shan-Tung Tu, Xian-Cheng Zhang, and Guo-Yan Zhou. "Analysis of Creep Crack Growth Behavior of the Brazed Joint Using Continuum Damage Mechanics Approach." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85126.

Full text
Abstract:
Creep crack growth behavior of the Inconel625/BNi-2 brazed joint considering the diffusion zone at 650 °C was investigated by a continuum damage mechanics approach based on the finite element method. The results show that creep crack nucleate and develop at the region of the brazing filler metal. The crack initiates at about 0.2 mm ahead of the crack tip. When the load is 1000 N, the crack initiation time of the CT specimen is 1664 hour. While when the load is 1135 N, the crack initiation time is only about 891 hour. The simulated results correspond well with the experimental data, presenting
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Qiuhao, Wei Zheng, Huaqiang Yin, Shengqiang Li, Xuedong He, and Tao Ma. "Corrosion of High Temperature Alloys in the Primary Coolant of HTGR Under Very-High Temperature Operation." In 2020 International Conference on Nuclear Engineering collocated with the ASME 2020 Power Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icone2020-16074.

Full text
Abstract:
Abstract The primary coolant loop of the high temperature gas-cooled reactor contains trace impurities that could cause some corrosion to the materials. When the HTGR operates at a very high temperature, the impurities in the coolant have significant influence on the properties of the alloys used in steam generators. Corrosion tests were conducted on the Inconel 800H, Inconel 617 and Hastelloy X, and the alloys are commonly used in the steam generator of HTGR. They were corroded for up to 48 hours at 950 °C in a given helium atmosphere with trace impurities, and the corrosion results were obse
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Inconel625' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography