Relevant bibliographies by topics / Increase of microhardness

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Increase of microhardness'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Increase of microhardness.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Increase of microhardness"

1

Liu, Xiao Zhen, Jun Hua Yang, Gang Wang, Ling Ling Song, and Ge Shi Zhuang. "Effect of Preparation Conditions on the Performance of Anodic Aluminum Oxide Films." Applied Mechanics and Materials 164 (April 2012): 223–26. http://dx.doi.org/10.4028/www.scientific.net/amm.164.223.

Full text
Abstract:
Neodymium salt was used as additives in preparing anodic aluminum oxide (AAO) films to improve its performance. AAO films were prepared by anodization method from a 15 vol. % sulphuric acid solution containing neodymium salt. The effects of anodization voltage, anodization temperature and anodization time on microhardness and thickness of AAO films were researched, respectively. The thickness of AAO film increases with the increase of anodization voltage, the microhardness of AAO film decreases with the increase of anodization voltage in 19 V～23 V. The thickness of AAO film increases with the
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Shuang Shuang, Yu Jun Xue, Yang Yang Xu, and Ji Shun Li. "Effect of Pulse Electrodeposition Parameters on Microhardness of Ni-ZrO2-CeO2 Nanocomposite Coating." Advanced Materials Research 1049-1050 (October 2014): 31–34. http://dx.doi.org/10.4028/www.scientific.net/amr.1049-1050.31.

Full text
Abstract:
Ni-ZrO2-CeO2 nanocomposite coating was prepared by pulse electrodeposition. The effect of addition of ZrO2 and CeO2 nanoparticles, average current density, duty cycle and pulse current on microhardness of Ni-ZrO2-CeO2 nanocomposites were studied. The results show that microhardness of nanocomposite is increased at first and then decreased with the increasing additive amounts of two kinds of nanoparticles. With increasing reverse the average current density, the microhardness of the composite coating increases. Also, the microhardness of nanocomposite fall with the increasing of pulse frequency
APA, Harvard, Vancouver, ISO, and other styles
3

Jindal, Sandeep, Rahul Chhibber, and N. P. Mehta. "Effect of Flux Constituents and Basicity Index on Mechanical Properties and Microstructural Evolution of Submerged Arc Welded High Strength Low Alloy Steel." Materials Science Forum 738-739 (January 2013): 242–46. http://dx.doi.org/10.4028/www.scientific.net/msf.738-739.242.

Full text
Abstract:
The application of high strength low alloy (HSLA) steels has been limited by unavailability of suitable joining and filler metals in submerged arc welding (SAW) processes. The present work aims at the design and development of flux for Submerged Arc Welding of HSLA steel. In the work L8 array of Taguchi Design is used to formulate eight types of fluxes to vary basicity index (BI) from 1.26 to 2.81 and to study the effect of flux constituents and basicity index on tensile strength, microhardness and microstructure of the weld metal. Empirical models for ultimate tensile strength and microhardne
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, Zhi Ming, Li Wen Tang, Min Min Cao, and Bin Bin Lei. "Investigation on Microstructure and Properties of Heavily Cold Rolled Cu-Fe Alloys." Advanced Materials Research 150-151 (October 2010): 847–51. http://dx.doi.org/10.4028/www.scientific.net/amr.150-151.847.

Full text
Abstract:
CuFe10 and CuFe15 (mass fraction) alloys were prepared by vacuum induction melting and were cold rolled heavily at room temperature. Microstructure, microhardness and electrical conductivity of these alloys were measured at various cold rolled strain levels. The experimental results showed that the microhardness increased rapidly and the electrical conductivity decreases gradually with the increase of rolling strain at first. The microhardness increased slowly while the strain η greater than 2.3. The Fe-rich phases are deformed to ribbons filaments. However, the electrical conductivity increas
APA, Harvard, Vancouver, ISO, and other styles
5

Davari, Mohammad, and Mehdi Mansouri Hasan Abadi. "Investigation of intercritical heat treatment temperature effect on microstructure and mechanical properties of dual phase (DP) steel." Metallurgical and Materials Engineering 23, no. 2 (2017): 143–52. http://dx.doi.org/10.30544/293.

Full text
Abstract:
In the present study, the effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferritic-martensitic dual-phase steel have been investigated utilizing tensile test, microhardness measurement and microscopic observation. Plain carbon steel sheet with a thickness of 2 mm was heat treated at 760, 780, 800, 820 and 840 °C intercritical temperatures. The results showed that martensite volume fraction (Vm) increases from 32 to 81%with increasing temperature from 760 to 840 °C. The mechanical properties of samples were examined by tensile and micr
APA, Harvard, Vancouver, ISO, and other styles
6

MUKHTAR, AAMIR, DELIANG ZHANG, CHARLIE KONG, and PAUL MUNROE. "EFFECT OF PROCESSING CONDITION AND COMPOSITION ON THE MICROHARDNESS OF Cu-(2.5-10)vol.%Al2O3 NANOCOMPOSITE POWDER PARTICLES PRODUCED BY HIGH ENERGY MECHANICAL MILLING." International Journal of Modern Physics B 24, no. 15n16 (2010): 2308–13. http://dx.doi.org/10.1142/s0217979210064848.

Full text
Abstract:
Nanostructured Cu -(2.5-10 vol. %) Al 2 O 3 nanocomposites were produced using high energy mechanical milling. For the as-milled Cu - Al 2 O 3 composite powder particles having Al 2 O 3 volume fractions of 2.5% and 5%, the increase in average microhardness is significant with the increase of milling time from 12 hours to 24 hours. With the increase of the content of Al 2 O 3 nanoparticles the microhardness increases and in the range of 255HV-270HV. The milled nanocomposite powders were heat treated at 150, 300, 400 and 500°C for 1 hour, respectively, to determine the thermal stability of the p
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Xiao Zhen, Qin Wei Shen, Yi Fan Luo, Xiao Zhou Liu, Jie Chen, and Qian Wei Shu. "Effect of Preparation Conditions on the Performance of Electrodeposited Mo-Ni Coating." Applied Mechanics and Materials 577 (July 2014): 15–18. http://dx.doi.org/10.4028/www.scientific.net/amm.577.15.

Full text
Abstract:
Mo-Ni coatings were prepared on Ni alloy by electrodeposition method. The effects of electrodeposition temperature, current density, stir speed and electrodeposition time on deposition rate and microhardness of Mo-Ni coating were researched, respectively. Deposition rate of Mo-Ni coating decreases with the increase of electrodeposition temperature in 35 °C ~ 60 °C. Deposition rate and microhardness of Mo-Ni coating increases with the increase of current density respectively in 15 A/dm2 ~ 17.5 A/dm2. Deposition rate and microhardness of Mo-Ni coating decreases with the increase of stir speed re
APA, Harvard, Vancouver, ISO, and other styles
8

Bagmutov, V. P., V. I. Vodopyanov, I. N. Zakharov, D. S. Denisevich, M. D. Romanenko, and N. G. Nazarov. "Influence of surface hardening by combined thermal force impacts on VT22 titanium alloy fatigue life and damage." Izvestiya Vuzov. Tsvetnaya Metallurgiya (Universities' Proceedings Non-Ferrous Metallurgy), no. 6 (December 16, 2020): 65–75. http://dx.doi.org/10.17073/0021-3438-2020-6-65-75.

Full text
Abstract:
The study covers the influence of electromechanical surface treatment (EMT), non-abrasive ultrasonic finishing (NAUF), their complex influence with subsequent aging on the fatigue life and surface microhardness changes. Samples for research were made of VT22 transition alloy rods after standard thermomechanical treatment. EMT was carried out by sample surface rolling with a roller and applying a high density current between them. As a result, surface thermomechanical treatment was carried out with the local fast surface heating and cooling. NAUF were implemented by shock treatment with an ultr
APA, Harvard, Vancouver, ISO, and other styles
9

Feng, Chang Jie, Xian Hu, Yuan Fei Jiang, and Qing Zhao. "Effects of Cu Addition on Microstructure and Adhesion Properties of Ti-Al-N Nanocomposite Films Deposited by Magnetron Sputtering." Advanced Materials Research 652-654 (January 2013): 1751–54. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.1751.

Full text
Abstract:
Ti-Al-Cu-N films with different Cu contents were synthesized on 1Cr11Ni2W2MoV stainless steel by DC magnetron sputtering. The microstructure, composition, microhardness and adhesion properties of the films were characterized by SEM/EDS, XRD, microhardness and scratch tests. The results show that a reduction of the grain size and an increase of hardness in Ti-Al-N films doped with1.04at% Cu were detected. Further increase the Cu content in the Ti-Al-N film, the grain size increases and become irregular, and the microhardness decreases. The adhesion property of Ti-Al-Cu-N films increased slightl
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Xiao Zhen, Le Tian Xia, Jian Qiang Gen, Xiao Zhou Liu, Jie Chen, and Lu Luo. "Preparation of Pulse Electrodeposited Mo-Ni Coating." Advanced Materials Research 971-973 (June 2014): 161–64. http://dx.doi.org/10.4028/www.scientific.net/amr.971-973.161.

Full text
Abstract:
Mo-Ni coatings were prepared on Ni alloy by pulse electrodeposition method. The effects of current density, electrodeposition temperature, frequency, duty cycle and electrodeposition time on microhardness of Mo-Ni coating were researched, respectively. Microhardness of Mo-Ni coating increases with the increase of current density, electrodeposition temperature, frequency and electro-deposition time in 17.75 A/dm2 ~ 19.25 A/dm2. 21 °C~ 25 °C, 1000 Hz ~ 5000 Hz and 10 min ~ 20 min, respectively. Microhardness of Mo-Ni coating decreases with the increase of electrodeposition temperature, electrode
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Increase of microhardness"

1

Тарельник, В. Б., И. Е. Волошин та Т. П. Волошко. "Повышение качества поверхностных слоев валов интегрированными технологиями (Часть 1. Влияние ЭЭЛ+ППД на микротвердость поверхностного слоя)". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66711.

Full text
Abstract:
Немаловажное значение в практике машиностроения имеют покрытия, которые могут быть сформированы различными способами. Основной их задачей является улучшение качественных параметров поверхностного слоя деталей машин: повышение микротвердости, износостойкости восстановление участков поверхности и др.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Increase of microhardness"

1

Lacombe, Alexandra, Yann Landon, Manuel Paredes, Clément Chirol, and Audrey Benaben. "Influence of the Hole Surface Integrity on the Fatigue Strength of an Aluminium Drilled Part." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_7.

Full text
Abstract:
AbstractFatigue strengths of aluminium 2024-T351 open-hole specimens drilled by axial and orbital drilling processes are compared. Two drilling diameters (Ø) are studied: 6.35 mm and 9.53 mm. Surface integrity characterization tests are conducted in order to study the link between drilling processes, surface integrity and fatigue life. Fatigue test results show an increase of the fatigue life for specimens drilled by axial drilling for Ø = 9.53 mm and no significant difference in fatigue life between the two drilling processes for Ø = 6.35 mm. Surface integrity results show no impact of the ro
APA, Harvard, Vancouver, ISO, and other styles
2

Qian, Xin, Changfu Li, Junfeng Sun, and Dan Wu. "Microstructure and Microhardness of TB6 Titanium Alloy Fabricated by Laser Deposition Manufacturing After Heat Treatment." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde221149.

Full text
Abstract:
The TB6 titanium alloy prepared by laser deposition is prone to uneven microstructure. In this paper, heat treatment was used to regulate the microstructure. Through the observation and analysis of microstructure and microhardness under different heat treatment states, the variation law of microhardness with the change of heat treatment process was explored. The results show that due to the distribution of layer bands in the as-depositeds of TB6 titanium alloy fabricated by laser deposition manufacturing. The microhardness decreases gradually with the increase of deposition height in a single
APA, Harvard, Vancouver, ISO, and other styles
3

Bhowmick, Sovan, Arindam Paul, Nisantika Biswas, Jhumpa De, Subhasish Sarkar, and Gautam Majumdar. "Synthesis and Characterization of Titanium and Graphite Powder Mixed Electric Discharge Machining on Inconel 718." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220722.

Full text
Abstract:
Electric discharge machining is extensively used to process difficult to cut materials such as superalloys, composite materials etc. The quality of machining can be improved by adding particles into the dielectric fluid which is commonly known as powder mixed electric discharge machining (PMEDM). In the present study, titanium and graphite powder are added to dielectric fluid and the effects of the powders have been analysed on material removal rate, surface roughness, microhardness and surface morphology analysis. Six experiments have been conducted considering each powder with three differen
APA, Harvard, Vancouver, ISO, and other styles
4

Nadim Melhem, George, Paul Richard Munroe, Charles Christopher Sorrell, and Alsten Clyde Livingstone. "Field Trials of Aerospace Fasteners in Mechanical and Structural Applications." In Encyclopedia of Aluminum and Its Alloys. CRC Press, 2019. http://dx.doi.org/10.1201/9781351045636-140000309.

Full text
Abstract:
The present work reports findings for the application of specialized aerospace aluminum rivets, manufactured from Al 7075 (Al-Zn-Mg-Cu) T6 alloy stem/mandrel, with an Al 5056 (Al-Mg) shank or sleeve, which were used for construction rectification of an outdoor louver façade on a high-rise building. These specialized rivets were used to replace failed conventional construction rivets, which consisted of sleeve and mandrel comprised of either all-steel, all-aluminum, or aluminum-steel. The building is in close vicinity to the ocean and exposed to extremely high wind loading, making the rivets su
APA, Harvard, Vancouver, ISO, and other styles
5

Ram, Nanak, and Vijay Gautam. "Experimental Studies of Microstructure and Its Effect on Mechanical Properties of As-Cast Si-Mo-Cr Ductile Cast Iron." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220809.

Full text
Abstract:
In the present work, three heats of Si-Mo-Cr ductile cast iron with varying amounts of major alloying elements are produced. The effect of the microstructural features on the microhardness, tensile strength and ductility is studied. Increasing the nodule count decreases the pearlite-ferrite ratio, which results in a decrease in tensile strength but an increase in percentage elongation. The spherical nodule plays a significant role in arresting the crack and reorients the crack path around the nodule, as evident from the results of scanning electron microscopy.
APA, Harvard, Vancouver, ISO, and other styles
6

Kumar, Jatinder, Gurpreet Singh, and Santosh Kumar. "An Experimental Investigation of Process Optimization of EDM for Newly Developed Aluminium Metal Matrix Composites." In Metal Matrix Composites: A Modern Approach to Manufacturing. BENTHAM SCIENCE PUBLISHERS, 2024. http://dx.doi.org/10.2174/9789815223439124010012.

Full text
Abstract:
The aim of this investigation is to investigate the contribution of controllable input parameters (viz. pulse on times, peak currents) on the performance of two newly developed MMCs (Al-8.5%SiC-1.5%Mo and Al-7%SiC-3%Mo). Both the metal matrix composites were fabricated using the stir-casting method. Thereafter, various tests such as microhardness test, tensile test, and porosity analysis of the newly developed composite were performed. To carry out the machining trials, an L18 orthogonal array (OA) was chosen. Optimization of the machining process was performed according to Taguchi analysis fo
APA, Harvard, Vancouver, ISO, and other styles
7

Casagrande, Henrique Cechinel, Anderson Daleffe, Gilson de March, et al. "Carbon precipitation on the bonding line between deposited material and base material using an additive manufacturing process." In Uniting Knowledge Integrated Scientific Research For Global Development V.2. Seven Editora, 2024. http://dx.doi.org/10.56238/sevened2024.018-048.

Full text
Abstract:
The additive manufacturing (AM) technique creates parts from successive deposition of material layer by layer. What makes this process a great industrial power is the savings in raw materials, compared to other types of manufacturing processes, as well as the manufacture of complex or customized parts, which other techniques would not be able to meet, or would depend on complementary processes. However, when dealing with metal MA, more precisely the method using the electric arc, high temperatures are required for wire fusion, generating heat transfers between the materials. Thus, this study s
APA, Harvard, Vancouver, ISO, and other styles
8

Fracchia, Elisa, and Mario Rosso. "Development and Characterization of New Functionally Graded Aluminium Alloys." In Aluminium Alloys - Design and Development of Innovative Alloys, Manufacturing Processes and Applications [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.101022.

Full text
Abstract:
Nowadays, aluminium alloys are adopted mainly to produce engineering and automotive components. The present investigation aims to design, cast and characterize novel functionally graded materials (FGMs) produced using Al-Mg and Al-Si alloys by gravity casting technique. Alloys were sequentially cast into a mould to obtain an FGM to realizing great mechanical and metallurgical bonding. Zn addition was further performed in FGM to increase the mechanical properties, thanks to the nucleation of the intermetallic phases MgZn2. Castings were subsequently mechanically tested by tensile tests, bending
APA, Harvard, Vancouver, ISO, and other styles
9

Biliuk, Anatolii, and Olena Diachynska. "THE APPLIED ORIENTATION OF THE PHYSICS COURSE AS AN EFFECTIVE TOOL FOR FORMING THE PROFESSIONAL COMPETENCE MODEL OF FUTURE TECHNOLOGICAL ENGINEERS." In Modern educational technologies in the training of specialists in the agricultural sector during the crisis. Publishing House “Baltija Publishing”, 2023. http://dx.doi.org/10.30525/978-9934-26-298-2-1.

Full text
Abstract:
Reliability of structures is the most important problem in modern meсhanical engineering. Its solution poses the task of creating materials with high stable physical, mechanical, chemical and other properties. The materials that make up the basis of structures are, as a rule, operated in variable fields of various nature (mechanical, temperature, etc.), therefore they continuously change their properties. In this regard, progress in the field of mechanical engineering cannot be achieved without full knowledge of the real structure of materials, without a deep understanding of the microprocesse
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Yingchun, Shiquan Jiang, Xiaomin Ma, et al. "Microstructure and Properties of Ni-Based Alloy Coatings by High-Efficiency Intelligent Cladding." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220246.

Full text
Abstract:
In this paper, an versatile and potential surface remelting strengthening technology, high-efficiency intelligent cladding (HEI-cladding) is presented. Ni-based alloy coatings were prepared by HEI-cladding. The microstructures of the cladding coatings were investigated by scanning electron microscopy, and the compositions were analyzed by electron diffraction spectroscopy. The phases of the cladding coating were clarified by X-ray diffraction technology. The microhardness of the coating was tested by microhardness tester. It shows that cladding coatings at 1298 K are denser and have fewer defe
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Increase of microhardness"

1

Chasse, Kevin R., and Preet M. Singh. "Hydrogen Effects on a Grade 2205 Duplex Stainless Steel in Sulfide-Containing Caustic Solutions." In CORROSION 2009. NACE International, 2009. https://doi.org/10.5006/c2009-09169.

Full text
Abstract:
Abstract Duplex stainless steel (DSS) may become susceptible to environmental assisted cracking (EAC) in sulfide-containing caustic solutions. The effects of hydrogen on as-received and annealed specimens of grade 2205 DSS exposed to a white liquor, comprised of 150 g/l NaOH and 50 g/l Na2S as well as sulfide-free caustic solution of 150 g/l NaOH have been evaluated by microhardness and nanoidentation after potentiostatic polarization in the solutions at room temperature for different times. A hydrogen microprint technique (HMT) was also used to evaluate the hydrogen accumulation sites on the
APA, Harvard, Vancouver, ISO, and other styles
2

Frank, Natalie Hana, Iain Stuart Hall, and Paolo Brunello. "Mitigation of CRU Heater Tube Carburization by Modified High Heat Transfer Ceramic Cladding Materials." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17831.

Full text
Abstract:
Abstract Carburization is a failure mechanism common to the petrochemical industry in Catalytic Reforming Units (CRU’s) where atmospheres containing hydrocarbons and/or carbon monoxide are prominent. Elevated fuel prices cause refineries to run with low excess oxygen to generate cost savings. The resulting atmosphere at elevated temperatures creates an environment where carbon is favorably transferred to iron and low alloy steels, forming a hardened layer of carbides that reduce the life of the steel tubing and vessels. Ceramic coatings have previously been applied in CRUs to increase radiant
APA, Harvard, Vancouver, ISO, and other styles
3

Chasse, Kevin R., and Preet M. Singh. "Hydrogen Embrittlement of 2205 Duplex Stainless Steel in Synthetic Kraft White Liquor." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10084.

Full text
Abstract:
Abstract Duplex stainless steels (DSS) may experience environmental assisted cracking (EAC) under certain conditions in the kraft white liquor solutions used by the pulp and paper industry. Previous work showed that hydrogen absorption is possible in these solutions under applied cathodic potentials (CP) at room temperature, which is a concern because DSSs may become susceptible to hydrogen embrittlement (HE) under certain conditions; however, the effect of a CP on the EAC behavior of DSS in kraft white liquor solutions is currently unknown. Microhardness was used to evaluate the change in har
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, J. H., R. G. Ballinger, and P. W. Stahle. "SCC Crack Growth in 316L Weld Metals in BWR Environments." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08600.

Full text
Abstract:
Abstract The thermal aging and consequent embrittlement of materials are ongoing issues in cast and duplex stainless steel. Spinodal decomposition is largely responsible for the well known “475°C” embrittlement that results in drastic reductions in ductility and toughness in cast materials. This process is also operative in welds in either cast or wrought stainless steels where delta ferrite is present. While the embrittlement can occur after several hundred hours of aging at 475°C, it can also occur at lower temperatures where ductility reductions have been observed after several tens of thou
APA, Harvard, Vancouver, ISO, and other styles
5

Li, C. J., B. Sun, M. Wang, F. Han, and T. Wu. "Microstructure and Properties of Micro-Plasma Sprayed Cu Coating." In ITSC2003, edited by Basil R. Marple and Christian Moreau. ASM International, 2003. http://dx.doi.org/10.31399/asm.cp.itsc2003p1291.

Full text
Abstract:
Abstract Cu coating was deposited by microplasma spraying system under a low power of 2.8 to 4.2kW. The effects of the main processing parameters including plasma arc power, operating gas flow and spray distance on particle velocity during spraying, and the microstructure and properties of the coating were investigated. The coating microstructure was examined with optical microscopy. The coating properties were characterized by cross sectional microhardness. The particle velocity during in-flight was examined using a particle velocity/temperature measurement system based on thermal radiation.
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Jin-Song, Yin-Hui Huang, Zhi-Dong Liu, and Zong-Jun Tian. "Jet Electrodeposited Cu-Al2O3 Nanocomposite Coatings." In 2007 First International Conference on Integration and Commercialization of Micro and Nanosystems. ASMEDC, 2007. http://dx.doi.org/10.1115/mnc2007-21103.

Full text
Abstract:
A jet electrodeposition device was carried out to prepare Cu-Al2O3 nanocomposite coatings. The influence of the concentration of Al2O3 in the electrolyte and parameters, such as cathodic current density, the electrolyte temperature as well as the electrolyte jet velocity, on the content of the Al2O3 in the deposite were investigated. The coatings ingredient and microstructure was measured by the scanning electron microscope (SEM) with energy dispersive analyzer system (EDX), the microhardness tests were conducted on an microhardness tester. The results show that the jet electrodeposition can f
APA, Harvard, Vancouver, ISO, and other styles
7

Saha, Gobinda C., Tarek A. ben Mahmud, and Tahir I. Khan. "Strain Hardening of Heat Treated Nanostructured WC-17Co Coatings and Their Sliding Wear Behavior." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-89525.

Full text
Abstract:
Grain size, their distribution and geometry are important to study the dislocation behavior and grain boundary sliding of ceramic reinforced metallic composite materials. Grain size reduction has been shown to lead to significant improvements of the wear resistance in nanostructured materials. As the grain size decreases from polycrystalline to nanocrystalline range, abrasive wear resistance increases considerably from the increased hardness and volume loss following Archard’s law of wear. Further, the heat treatment effect on the content of the metallic binder in a ceramic-metallic (cermet) m
APA, Harvard, Vancouver, ISO, and other styles
8

Khalkho, J. S., Ch S. Vidyasagar, and D. B. Karunakar. "Evaluation of Microstructure and Mechanical Properties of Al-TaC Composites Developed by Muti-Step Stir Casting Process." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8291.

Full text
Abstract:
Abstract In the present study, four AA7075 composite samples reinforced with varying amounts of TaC in the range of 0.1wt%, 0.2wt%, 0.3wt%, 0.4wt%, were developed using a multi-step stir casting to improve the mechanical properties. The mechanical properties of the developed samples such as microhardness, tensile strength, compression strength, and elongation were characterized using a computerized Vickers hardness testing machine for microhardness and a Universal Testing Machine for both tensile and compression respectively. The effect of Tantalum carbide on the microstructures of the composi
APA, Harvard, Vancouver, ISO, and other styles
9

Zhou, H., F. Li, B. He, J. Wang, and B. Sun. "Effect of Plasma Spraying Process on Microstructure and Microhardness of Titanium Alloy Substrate." In ITSC2007, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2007. http://dx.doi.org/10.31399/asm.cp.itsc2007p0983.

Full text
Abstract:
Abstract High temperature titanium alloys are considered as good candidate materials for many aerospace applications. In order to increase the usable temperatures and oxidation resistance of titanium alloys, plasma spraying thermal barrier coatings on the titanium alloys is considered as an effective method. The effect of plasma spraying process on microstructure and microhardness of the titanium alloy was investigated by scanning electron microscope, energy dispersion analytical X-ray spectroscopy and microhardness test. The results show that the microstructure of the titanium alloy inside th
APA, Harvard, Vancouver, ISO, and other styles
10

Lopatin, I. V., Yu H. Akhmadeev, E. A. Petrikova, M. E. Rygina, and Yu F. Ivanov. "Evolution of the structure and properties of AISI 1020 steel subjected to elion nitriding in a low-pressure gas discharge plasma." In 8th International Congress on Energy Fluxes and Radiation Effects. Crossref, 2022. http://dx.doi.org/10.56761/efre2022.c3-p-012501.

Full text
Abstract:
A method and experiments of nitriding AISI 1020 steel with simultaneous heating of the samples with the electron component of plasma are described. A nitriding regime is explained that makes it possible to form a hardened layer up to 500 µm thick. It is shown that the microhardness of the surface layer of the steel increases with the increase in the nitriding temperature and correlates with the relative content of the nitride phase. It has found that in the nitriding temperature range from 450 °C to 600 °C, the maximum microhardness is formed in the near-surface layer at the depth of ~10 µm at
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Increase of microhardness' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography