Relevant bibliographies by topics / Induction heating

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Induction heating'

Author: Grafiati
Published: 4 June 2021
Last updated: 29 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Induction heating.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Induction heating"

1

Min, Jinkun, Guangyu Zhu, Yidan Yuan, and Jingquan Liu. "COMSOL Simulation for Design of Induction Heating System in VULCAN Facility." Science and Technology of Nuclear Installations 2021 (August 19, 2021): 1–12. http://dx.doi.org/10.1155/2021/9922503.

Full text
Abstract:
The experimental facility VULCAN was setup to study the fuel-coolant interaction (FCI) phenomena in a postulated severe accident of light water reactors. The heating system is important for the facility to prepare molten material in a crucible. This article is concerned with the design of the heating system, which applies electromagnetic induction heating method. The COMSOL code was employed to simulate the induction heating characteristics of a graphite crucible under different current and frequency of the work coil (inductor). Given a frequency, the relationship between the crucible’s average temperature and the inductor’s current is obtained, which is instrumental to select the power supply of the induction heating system. Meanwhile, the skin effect of induction heating is analyzed to guide the choice of frequency and inductor of the heating system. According to the simulation results, the induction heating system of frequency 47 kHz is suitable for the experiment, with a good agreement in temperature between the measured and the predicted.
APA, Harvard, Vancouver, ISO, and other styles
2

Samran, Santalunai, Thosdeekoraphat Thanaset, and Thongsopa Chanchai. "Thermal Analysis of Inductive Coils Array against Cylindrical Material Steel for Induction Heating Applications." Applied Mechanics and Materials 330 (June 2013): 754–59. http://dx.doi.org/10.4028/www.scientific.net/amm.330.754.

Full text
Abstract:
This paper presented the heating of inductive coil which is 3 elements array. The induction heating coil improve the variations heating that it is increased the system efficiency. By means of the inductive coil has the diameter of 2, 3 and 4 cm and divide the coil as 2 types. There are the inverses and reverse inductive coil arrays, with heating test by cylindrical steel material. Then, this paper considers the heating efficiency simulation of 2 types by CST EM studio 2009. In addition, the experimental of the inductor heating is use the full bridge inverter circuit, the power of 200 W at 28 kHz resonant frequency. Moreover, the distance between coils is coincided of simulation and experimental results, the inverse type at the diameter of 2 cm can be provide the maximum heater.
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Yong, Xiong Liang, Zhao Dong Wang, Jia Dong Li, and Tian Liang Fu. "Study on Three Dimensional Direct Coupling Simulation of Induction Heating for Hot Stamping." Advanced Materials Research 1063 (December 2014): 280–89. http://dx.doi.org/10.4028/www.scientific.net/amr.1063.280.

Full text
Abstract:
As to the conventional hot stamping furnance’s shortcomings of long heating time, easy oxidized, high energy consumption, the application of induction heating for hot stamping were studied. By using COMSOL Multiphysics software, we calculated the electromagnetic induction field and temperature field by use of the direct coupling (Direct Coupling Method) in the heating process of hot forming sheet and studied the influence of inductor device parameters (such as induction length, distance between inductor and sheet etc.) and various process parameters (such as the power supply frequency, current density, sheet thickness etc.) on heating rate and temperature distribution. That will have a good guidance on the application of induction heating to hot stamping field.
APA, Harvard, Vancouver, ISO, and other styles
4

Dudwadka, Asawari, and Dr Y. S. Rao Dr. Y. S. Rao. "MATLAB Simulation of Inverters for Induction Heating System." International Journal of Scientific Research 2, no. 6 (June 1, 2012): 152–55. http://dx.doi.org/10.15373/22778179/june2013/49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

OCILKA, Matúš, and Dobroslav KOVÁČ. "SIMULATION MODEL OF INDUCTION HEATING IN COMSOL MULTIPHYSICS." Acta Electrotechnica et Informatica 15, no. 1 (March 1, 2015): 29–33. http://dx.doi.org/10.15546/aeei-2015-0005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aroua, Fatima Zohra, Ahmed Salhi, Rezig Mohamed, and Djemai Naimi. "Modeling and Simulation of a cooking inductors by Electromagnetic Induction." All Sciences Abstracts 1, no. 2 (July 25, 2023): 25. http://dx.doi.org/10.59287/as-abstracts.1215.

Full text
Abstract:
The fundamental concepts of induction heating have been discovered and applied to industrial processes since the 1920s. Its principle is based on the direct application of two physical laws, Lenz's law, and the Joule effect. The development of electromagnetic induction principles in cooking systems is progressing, as they offer better working conditions, good safety, high energy efficiency, and low pollution. Induction heating is the transmission of electromagnetic energy through the surface of a heated material via three physical phenomena: permeability, electrical conductivity and thermal conductivity, depending on temperature. This electro-thermal technique permits electrical conductive materials to be heated without physical contact with an electrical source. In particular, the study of the inductor position in the heating plate can improve and normalize the induction heating temperature. In this work, we proposed several geometries for cooking inductor position based on numerical modeling of induction heating processes using the finite element method on Matlab to solve all electromagnetic problems. The chosen geometrical model with 3 inductors has a good temperature distribution in the heating plate of about 650 K (377 C).
APA, Harvard, Vancouver, ISO, and other styles
7

Seehase, Dirk, Christian Kohlen, Arne Neiser, Andrej Novikov, and Mathias Nowottnick. "Selective Soldering on Printed Circuit Boards with Endogenous Induction Heat at Appropriate Susceptors." Periodica Polytechnica Electrical Engineering and Computer Science 62, no. 4 (November 30, 2018): 172–80. http://dx.doi.org/10.3311/ppee.13277.

Full text
Abstract:
In this work, methods for the endogenous heating of printed circuit boards (PCBs) by means of inductive losses in built-in susceptors are presented. Two basic types of inductive heating were studied, the heating in the transversal field and the heating in the longitudinal field. Elementary test stands were constructed and characterized for both field geometries. These setups were then used to analyze various susceptor materials like copper and aluminum for the transversal field heating and nickel and iron for the longitudinal field heating. To demonstrate the soldering processes by means of inductive heating, exemplary processes were conducted on both test stands by emulating a standard solder reflow profile. The limitations of using induction heating on printed circuit boards are illustrated by component lead frames, which also heat up in the inductive field and can hence be damaged.In short, this paper presents a selective heating method, based on induction heating, for printed circuit boards. Furthermore possible setups for implementing this heating method are described.
APA, Harvard, Vancouver, ISO, and other styles
8

Levshin, G. E. "Magnetization of ferromagnetic charge at induction heating." Izvestiya. Ferrous Metallurgy 65, no. 2 (March 16, 2022): 85–91. http://dx.doi.org/10.17073/0368-0797-2022-2-85-91.

Full text
Abstract:
The article presents analysis of magnetization and heating of ferromagnetic charge in crucibles of induction furnaces of two types. In inductor furnaces, the charge is magnetized by a vertical electromagnetic flow, and in electromagnetic furnaces with a curved U-, C-, or O-shaped magnetic circuit (MPr) – by a horizontal flow. Knowledge of these largely general magnetization processes is insufficient. Bi magnetic induction in charge material is rather important. There are difficulties in determining this parameter during magnetization of a single piece of charge and other magnetic quantities associated with it: Bm induction and Nm strength of the demagnetizing field, N demagnetization coefficient, M magnetization, magnetic permeabilities of μi substance and μt body, km susceptibility, etc. Difficulties increase at magnetization, if it is a porous body with crucible volume of ~V t and a factor of filling with ferromagnetic pieces of this volume of Kv ≤ 0.5. It also creates a demagnetizing field with Bmt induction and Hmt strength. Beyond that, pores have an additional demagnetizing effect. Therefore, the induction Вiт in a porous body is less than the induction Вi in a solid one. To compare magnetization of ferromagnetic charge with horizontal and vertical flows with frequency of 50 Hz, modeling experiments were carried out with the samples of DSL08 unconsolidated shot from high-carbon steel (GOST 11964 – 83) with Kv ≈ 0.53. The samples were placed in the inductor and between the poles of a U-shaped core piece. Induction was measured by a cylindrical and flat probe unit of Sh1-15 militeslameter in air and in the sample. An advantage of electromagnetic furnace over an inductor one is more uniform distribution of Bi induction in charge and its significant excess (1.7 times) over the Be induction in a furnace working cavity, which indicates more efficient use of electromagnetic energy in this furnace during heating. The author proposed to control Вi induction when heating the charge by the ammeter-voltmeter method using measuring coil made of heat-resistant wire.
APA, Harvard, Vancouver, ISO, and other styles
9

Han, Wei, Kwok Tong Chau, Hoi Chun Wong, Chaoqiang Jiang, and Wong Hing Lam. "All-In-One Induction Heating Using Dual Magnetic Couplings." Energies 12, no. 9 (May 10, 2019): 1772. http://dx.doi.org/10.3390/en12091772.

Full text
Abstract:
This paper proposes and implements an all-in-one induction heating system, which can accommodate both pan-shaped and wok-shaped utensils. Traditionally, the pan is heated by a planar induction cooktop while the wok is heated by a curved induction cooktop. In this paper, both magnetic inductive coupling and magnetic resonant coupling are utilized to achieve excellent heating performance of the wok based on a planar primary coil. The key is to flexibly employ a detachable frustum coil for heating the wok. Specifically, the theoretical models of the proposed induction heating system with and without using the frustum coil are derived to analyze the proposed system. Computational simulation results of the magnetic and thermal fields of the proposed system are provided to elaborate the heating performance of the wok. A 1500 W prototype is designed and built. The calculated, simulated and experimental results are all in good agreement, which validate the feasibility of the proposed induction heating system well.
APA, Harvard, Vancouver, ISO, and other styles
10

Gergely, Raphael. "Investigation of Induction Heating for Sheet Metal with Moving Induction Coil." International Journal of Electrical and Electronic Engineering & Telecommunications 13, no. 4 (2024): 317–22. http://dx.doi.org/10.18178/ijeetc.13.4.317-322.

Full text
Abstract:
The efficiency of induction heating is highly dependent on the coil geometry and the air gap between the coil and the workpiece, therefore the aim of this research is to experimentally evaluate the efficiency and uniformity of temperature distribution in induction heating, utilizing an inductor coil, movable in three axes. The experiment is conducted under the condition that the inductor coil is not tailored for the specific workpiece, giving it a higher flexibility compared to the conventional application of induction heating. To achieve this objective, a downscaled test bench was designed, employing a CNC machine for execution. In addition, in this study, a second test bench was built to establish an analytical approach in determining the parameter field between power, air gap and efficiency. The steady-state conditions in this test bench allowed the closure of the energy balances to be calculated analytically, allowing immediate validation of the accuracy of the results. This parameter field was utilized to evaluate the outcomes of the moving inductor experiments.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Induction heating"

1

Amrhein, Andrew Aloysius. "Induction Heating of Aluminum Cookware." Thesis, Virginia Tech, 2015. http://hdl.handle.net/10919/77400.

Full text
Abstract:
Induction heating has become a popular alternative to other heat sources for stovetop cooking applications due to performance, efficiency, control response, and safety. The main drawback is that extreme difficulty is encountered when trying to head low-resistivity, non-ferromagnetic metals such as aluminum and copper, which are commonly used for cookware in several societies. The lack of ferromagnetic properties, resulting in no hysteresis dissipation, and low resistivity of such metals results in an impractically low resistance reflected through the work coil. The resultant impedance complicates inverter design, as it is too low to be efficiently driven with conventional inverter topologies. The magnitudes of current involved in exciting this impedance also severely impact the efficiency of the coil and resonant components, requiring extreme care in coil design. This work explores various techniques that have been proposed and/or applied to efficiently heat low-resistivity cookware and the associated limitations. A transformer-coupled series-load-resonant topology driven by a full-bridge inverter is proposed as a means of efficiently heating aluminum cookware within practical design constraints. The experimental circuit is built and successfully tested at an output power of 1.66kW. The procedure of optimizing the work coil for improved efficiency is also presented along with the procedure of measuring coil efficiency. An improved circuit incorporating switch voltage detection to guarantee zero-voltage switching is then built in order to overcome limitations of this design.
Master of Science
APA, Harvard, Vancouver, ISO, and other styles
2

Hua, Xia. "Induction heating for high temperature catalysis." Thesis, Queen's University Belfast, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.695372.

Full text
Abstract:
Within this thesis the principle and application of induction heating will be introduced and the synthesis of magnetic materials, specifically ferrite type materials, via sol-gel methods reported. It is shown that the optimized ferrites demonstrated both excellent catalytic and induction heating properties which can be applied to various reactions. The reaction range can even be extended if magnetic materials are coated with other catalytically active components. Another possible solution which is discussed is the combination of induction heating of bulk metal materials which have been physically blended with an active catalyst. These inductively heated particles then transfer the reaction heat to the surrounding catalyst particles thereby assisting the reaction. The main example used is the oxidative ethylbenzene dehydrogenation reaction. This has been intensively studied over past number of decades as styrene is one of the most useful intermediate compounds for organic synthesis. The combination of induction heating with catalytically active magnetic materials will be introduced here and compared to traditional thermal heating. It will be shown that less deactivation was obtained under induction heating when using CoFe2O4 as a dual functional catalyst. The thesis concludes with an overall discussion and some personal views on potential future directions for this work.
APA, Harvard, Vancouver, ISO, and other styles
3

Fisk, Martin. "Simulation of induction heating in manufacturing." Licentiate thesis, Luleå : Division of Material Mechanics, Luleå University of Technology, 2008. http://epubl.ltu.se/1402-1757/2008/42/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tebb, David W. "Transistorised induction heating power supplies using MOSFET's." Thesis, Loughborough University, 1986. https://dspace.lboro.ac.uk/2134/12595.

Full text
Abstract:
A prototype has been designed and constructed that has fed 3kW into a Commercial workcoil at 150 kHz. Another lower power inverter has been built. This was developed with ease of production in mind to aid the transfer of technology to the sponsoring company. The company have adopted this unit and are manufacturing it. The thesis reviews induction heating power supplies with emphasis on those able to operate above 100 kHz. Members of the MOSFET family are described and critically assessed for the application Prototypes of various configurations have been constructed and experience of these has led to the choice of current fed topology as the best for the application. The design and layout of a three phase current fed full bridge inverter that can feed 5 kW into an industrially relevant coil at 400 kHz and a single phase 2.5 kW version are described. Results of tests carried out on the units are presented. A microprocessor system has been selected which has been used for closed loop control of power, temperature and housekeeping tasks such as the supervision of interlocks.
APA, Harvard, Vancouver, ISO, and other styles
5

Walker, John David. "Cage rotor heating at stall." Thesis, University of Cambridge, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239375.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Martín, Segura Guillermo. "Induction heating converter's design, control and modeling applied to continuous wire heating." Doctoral thesis, Universitat Politècnica de Catalunya, 2012. http://hdl.handle.net/10803/83346.

Full text
Abstract:
Induction heating is a heating method for electrically conductive materials that takes advantage of the heat generated by the Eddy currents originated by means of a varying magnetic field. Since Michael Faraday discovered electromagnetic induction in 1831, this phenomena has been widely studied in many applications like transformers, motors or generators' design. At the turn of the 20th century, induction started to be studied as a heating method, leading to the construction of the first industrial induction melting equipment by the Electric Furnace Company in 1927. At first, the varying magnetic fields were obtained with spark-gap generators, vacuum-tube generators and low frequency motor-generator sets. With the emergence of reliable semiconductors in the late 1960's, motor-generators were replaced by solid-state converters for low frequency applications. With regard to the characterization of the inductor-workpiece system, the first models used to understand the load's behavior were based on analytical methods. These methods were useful to analyze the overall behavior of the load, but they were not accurate enough for a precise analysis and were limited to simple geometries. With the emergence of computers, numerical methods experienced a tremendous growth in the 1990's and started to be applied in the induction heating field. Nowadays, the development of commercial softwares that allow this type of analysis have started to make the use of numerical methods popular among research centers and enterprises. This type of softwares allow a great variety of complex analysis with high precision, consequently diminishing the trial and error process. The research realized in last decades, the increase in the utilization of numerical modeling and the appearance and improvement of semiconductor devices, with their corresponding cost reduction, have caused the spread of induction heating in many fields. Induction heating equipments can be found in many applications, since domestic cookers to high-power aluminum melting furnaces or automotive sealing equipments, and are becoming more and more popular thanks to their easy control, quick heating and the energy savings obtained. The present thesis focuses on the application of induction heating to wire heating. The wire heating is a continuous heating method in which the wire is continuously feeding the heating inductor. This heating method allows high production rates with reduced space requirements and is usually found in medium to high power industrial processes working 24 hours per day. The first chapters of this study introduce the induction heating phenomena, its modeling and the converters and tanks used. Afterwards, a multichannel converter for high-power and high-frequency applications is designed and implemented with the aim of providing modularity to the converter and reduce the designing time, the production cost and its maintenance. Moreover, this type of structure provides reliability to the system and enables low repairing times, which is an extremely interesting feature for 24 hours processes. Additionally, a software phase-locked loop for induction heating applications is designed and implemented to prove its flexibility and reliability. This type of control allows the use of the same hardware for different applications, which is attractive for the case of industrial applications. This phase-locked loop is afterwards used to design and implement a load-adaptative control that varies the references to have soft-switching according to load's variation, improving converter's performance. Finally, the modeling of a continuous induction wire hardening system is realized, solving the difficulty of considering the mutual influence between the thermal, electromagnetic and electric parameters. In this thesis, a continuous process is modeled and tested using numerical methods and considering converter's operation and influence in the process.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Lei. "Numerical modeling of induction assisted subsurface heating technology." Digital WPI, 2012. https://digitalcommons.wpi.edu/etd-theses/574.

Full text
Abstract:
Nickel-based super alloys are widely employed in the aerospace industry due to their high- temperature strength and high corrosion resistance. Because of the special application, the superficial residual stress of the super alloy is mandatory to 100% compressive stress according to the Federal Aviation Administration (FAA) regulations. In manufacturing of nickel-based super alloy components, grinding processes are necessarily applied as the final material removal step for achieving the stringent tolerance and surface finish requirements. During the traditional grinding process of Nickel based alloy, due to the thermal effect, tensile residual stress might be generated on the surface of the alloy. It's critical to transfer the tensile residual stress to compressive one which benefits on the fatigue life of alloy. In the thesis, a novel technology is developed to generate the superficial compressive residual stress with the method of embed a subsurface heating layer inside the workpiece to regulate the distribution of temperature field very before mechanical process. The residual stress might be reduced much, even transfer to compressive stress after combining the thermal effect. The numerical model will be built in the thesis including the induction model, heat transfer model, grinding heat model. Effects of different parameters on final subsurface heating layer will be studied including the coil parameters, concentrator parameters, coolant parameters, feed rate and also electromagnetic field properties such as the skin effect, proximity effect and slot effect. The thesis creates a system combining induction heating and cooling processes to regulate the temperature distribution in subsurface area that will be used for further stress analysis.
APA, Harvard, Vancouver, ISO, and other styles
8

Knauf, Benedikt J. "Polymer bonding by induction heating for microfluidic applications." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/7105.

Full text
Abstract:
Microfluidic systems are being used in more and more areas and the demand for such systems is growing every day. To meet such high volume market needs, a cheap and rapid method for sealing these microfluidic platforms which is viable for mass manufacture is highly desirable. In this work low frequency induction heating (LFIH) is introduced as the potential basis of a cost-effective, rapid production method for polymer microfluidic device sealing. Thin metal layers or structured metal features are introduced between the device s substrates and heated inductively. The surrounding material melts and forms a bond when cooling. During the bonding process it is important to effectively manage the heat dissipation to prevent distortion of the microfluidic platform. The size of the heat affected zone (HAZ), and the area melted, must be controlled to avoid blockage of the microfluidic channels or altering the channels wall characteristics. The effects of susceptor shape and area, bonding pressure, heating time, etc, on the heating rate have been investigated to provide a basis for process optimisation and design rules. It was found that the maximum temperature is proportional to the square of the susceptor area and that round shaped susceptors heat most efficiently. As a result of the investigations higher bonding pressure was identified as increasing bond strength and allowing the reduction of heating time and thus the reduction of melt zone width. The use of heating pulses instead of continuous heating also reduced the dimensions of melt zones while maintaining good bond strength. The size of the HAZ was found to be negligible. An analytical model, which can be used to predict the heating rate, was derived. In validating the model by numeric models and experiments it was found that it cannot be used to calculate exact temperatures but it does correctly describe the effect of different heating parameters. Over the temperature range needed to bond polymer substrates, cooling effects were found not to have a significant impact on the heating rate. The two susceptor concepts using thin metal layers (metal-plastic bonds) or structured metal features (plastic-plastic bonds) were tested and compared. While the metal-plastic bonds turned out to be too weak to be useful, the bonds formed using structured susceptors showed good strength and high leakage pressure. Based on the knowledge gained during the investigations a microfluidic device was designed. Different samples were manufactured and tested. During the tests minor leaks were observed but it was found that this was mainly due to debris which occurred during laser machining of the channels. It was concluded that induction bonding can be used to seal plastic microfluidic devices. The following guidelines can be drawn up for the design of susceptors and process optimisation: Materials with low resistivity perform better; For very thin susceptors the effect of permeability on the heating rate is negligible; The cross-sectional area of the susceptor should be as large as possible to reduce resistance; The thickness of the susceptor should be of similar dimensions to the penetration depth or smaller to increase homogeneity of heat dissipation; The shape of the susceptor should follow the shape of the inductor coil, or vice-versa, to increase homogeneity of heat dissipation; The susceptor should form a closed circuit; Higher bonding pressure leads to stronger bonds and allows reduced heating times; Pulsed heating performs better than continuous heating in terms of limited melt area and good bond strength. The drawbacks of the technique are explained as well: introducing additional materials leads to additional process steps. Also the structuring and placement of the susceptor was identified to be problematic. In this project the structured susceptor was placed manually but that is not feasible for mass manufacture. To be able to use the technique efficiently a concept of manufacturing the susceptor has to be found to allow precise alignment of complex designs.
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Richard Yi. "A generalized approach to planar induction heating magnetics." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/75841.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student submitted PDF version of thesis.
Includes bibliographical references (p. 85-90).
This thesis describes an efficient numerical simulation technique of magnetoquasistatic electromagnetic fields for planar induction heating applications. The technique is based on a volume-element discretization, integral formulation of Maxwell's equations, and uses the multilayer Green's function to avoid volumetric meshing of the heated material. The technique demonstrates two orders of magnitude of computational advantage compared to existing FEM techniques. Single-objective and multiobjective optimization of a domestic induction heating coil are performed using the new technique, using more advanced algorithms than those previously used due to the increase in speed. Both optimization algorithms produced novel, three-dimensional induction coil designs.
by Richard Yi Zhang.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
10

Durukan, Ilker. "Effects Of Induction Heating Parameters On Forging Billet Temperature." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/12608879/index.pdf.

Full text
Abstract:
Induction heating is one of the efficient and modern technique for heating raw materials for hot forging process. The induction heating furnaces use electro-magnetic field to transfer energy to the metal workpiece and heat is generated inside the material. The magnetic field can be provided by using induction coil. The power supplied to induction coil, the moving speed of the billet that is called conveyor speed and the coil box hole diameter are the factors affecting the resultant temperature of the heated billet. In this study, AISI 1045 type steel billets with a diameter of Ø
30 mm and length of 100 mm have been heated in a particular induction heater. During heating, effects of different levels of power, conveyor speed and the coil boxes with different hole diameters are investigated. The 125 KW 3000 Hz induction heater which is available in METU-BILTIR Research and Application Center Forging Laboratory is used in experiments. The heating experiments are designed according to 23 Factorial Design of Experiment Method. Multiple linear regression technique is used to derive a mathematical formula to predict the temperature of the heated billet. A good correlation between the measured temperatures that are the results of different sets of induction heating parameters and the predicted temperatures that are calculated by using temperature prediction formula has been observed.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Induction heating"

1

Walkden, F. W. Induction heating. London: Electricity Association, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Council, Electricity. Induction heating. London: Electricity Council, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nacke, Bernard, and Egbert Baake. Induction heating: Heating, hardening, annealing, brazing, welding. Essen, Germany: Vulkan-Verlag, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

d'Electrothermie, Union Internationale, ed. Induction heating: Industrial applications. Paris: U.I.E., 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

John, Davies. Conduction and induction heating. London, U.K: P. Peregrinus Ltd. on behalf of the Institution of Electrical Engineers, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Valery, Rudnev, ed. Handbook of induction heating. New York: Marcel Dekker, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lupi, Sergio, Michele Forzan, and Aleksandr Aliferov. Induction and Direct Resistance Heating. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-03479-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

John, Davies. Heat transfer for induction heating. London: Electricity Council, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Edgar, Rapoport, and Pleshivtseva Yulia, eds. Optimal control of induction heating processes. Boca Raton, FL: CRC/Taylor & Francis, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zinn, S. Elements of induction heating: Design, control, and applications. Metals Park, Ohio: ASM International, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Induction heating"

1

Kolleck, Ralf. "Induction Heating." In CIRP Encyclopedia of Production Engineering, 1–5. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_6484-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kolleck, Ralf. "Induction Heating." In CIRP Encyclopedia of Production Engineering, 946–50. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_6484.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kolleck, Ralf. "Induction Heating." In CIRP Encyclopedia of Production Engineering, 692–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_6484.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fisk, Martin. "Induction Heating." In Encyclopedia of Thermal Stresses, 2419–26. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-2739-7_828.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gooch, Jan W. "Induction Heating." In Encyclopedic Dictionary of Polymers, 386. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_6272.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lupi, Sergio. "Induction Heating." In Fundamentals of Electroheat, 353–524. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-46015-4_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Herwig, Heinz. "Induktionsheizung (induction heating)." In Wärmeübertragung A-Z, 93–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-642-56940-1_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Olevsky, Eugene A., and Dina V. Dudina. "Induction Heating Sintering." In Field-Assisted Sintering, 275–91. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76032-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Touzani, Rachid, and Jacques Rappaz. "Induction Heating Processes." In Scientific Computation, 197–219. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-0202-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Agbinya, Johnson I. "Induction Cooking and Heating." In Wireless Power Transfer, 681–701. 2nd ed. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003340072-20.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Induction heating"

1

Dexter, A. C. "Distributed parameter control of billet heating." In IEE Half-Day Colloquium on Electromagnetics and Induction Heating. IEE, 1996. http://dx.doi.org/10.1049/ic:19961401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Green, A. M. "Operation of inverters supplying mutually coupled induction heating loads." In IEE Half-Day Colloquium on Electromagnetics and Induction Heating. IEE, 1996. http://dx.doi.org/10.1049/ic:19961400.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Induction heating systems." In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2013. http://dx.doi.org/10.1109/iecon.2013.6699947.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Induction heating systems." In IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2014. http://dx.doi.org/10.1109/iecon.2014.7048971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Induction Heating Systems." In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2018. http://dx.doi.org/10.1109/iecon.2018.8591269.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gibson, R. C. "Introduction to coupled electromagnetic and thermal field computer simulations of induction heating processes." In IEE Half-Day Colloquium on Electromagnetics and Induction Heating. IEE, 1996. http://dx.doi.org/10.1049/ic:19961397.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhu, X. R. "The computer modelling of the semi-levitation melting of metals." In IEE Half-Day Colloquium on Electromagnetics and Induction Heating. IEE, 1996. http://dx.doi.org/10.1049/ic:19961398.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sherlock, J. P. "Numerical simulation of electromagnetic mixing of molten metal." In IEE Half-Day Colloquium on Electromagnetics and Induction Heating. IEE, 1996. http://dx.doi.org/10.1049/ic:19961399.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fujita, Hideaki, Naoki Uchida, and Kazuhiro Ozaki. "Zone Controlled Induction Heating (ZCIH) A New Concept in Induction Heating." In 2007 Power Conversion Conference - Nagoya. IEEE, 2007. http://dx.doi.org/10.1109/pccon.2007.373162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Phondon, Chainiyom, and Pattana Intani. "High power induction heating." In 2014 17th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2014. http://dx.doi.org/10.1109/icems.2014.7014079.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Induction heating"

1

Christian, Jonathan, Matthew Kesterson, Dean Thompson, Klaehn Burkes, and Kaitlin Lawrence. Induction Heating for Tritium Storage Beds. Office of Scientific and Technical Information (OSTI), November 2019. http://dx.doi.org/10.2172/1576215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fink, Bruce K., Roy L. McCullough, John W. Gillespie, and Jr. Induction Heating of Carbon-Fiber Composites: Thermal Generation Model. Fort Belvoir, VA: Defense Technical Information Center, September 2000. http://dx.doi.org/10.21236/ada382423.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yunovich and Thompson. L52058 Evaluation of Preheat Requirements for In-Service Welding. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), July 2005. http://dx.doi.org/10.55274/r0010182.

Full text
Abstract:
Accurate control of preheat is often required during pipeline welding, both for new construction and for in-service welding (repairs and hot tapping). Conventional methods of applying preheat, such as gas torches, are difficult to control, and can be slow and inefficient. Additionally, the rapid cooling associated with in-service pipelines tends to limit the effectiveness of any form of preheat. New equipment for induction preheating offers the possibility of achieving excellent levels of control together with high thermal efficiency, rapid response, and minimal disruption of accessibility to the weld joint. The objective of this project was to develop guidelines for preheating welds made onto in-service pipelines and determine the capabilities and limitations of methods of applying preheat using equipment suitable for in-service applications. Field trial experiments were carried out on a 34-in. (863.6-mm) diameter × 0.281-in. (7.1-mm) wall thickness crude oil pipeline to compare the performance of induction preheating and flame preheating under actual in-service conditions. In general, induction heating was found to be much more effective than flame heating. The field trial produced some interesting insights into preheating for in-service welding applications in general and the use of induction heating for this purpose in particular. Guidance was developed pertaining to the appropriate preheat.
APA, Harvard, Vancouver, ISO, and other styles
4

Fink, Bruce K., Shridhar Yarlagadda, John W. Gillespie, and Jr. Design of a Resistive Susceptor for Uniform Heating During Induction Bonding of Composites. Fort Belvoir, VA: Defense Technical Information Center, January 2000. http://dx.doi.org/10.21236/ada373381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Esch, Ernst, Jeffrey Goettee, and James Jurney. Power and Power Factor Measurements on the Induction Heating System at TA-46. Office of Scientific and Technical Information (OSTI), October 2014. http://dx.doi.org/10.2172/1160099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

AUNG, May Phyo, Mikihito HIROHATA, and Yasuo KITANE. IMPROVEMENT OF RESIDUAL STRESS ON GUSSET WELDED JOINTS BY HEAT TREATMENT WITH INDUCTION HEATING. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wilson, D. M., D. O. Bishop, R. A. Green, and A. T. Teruya. Engineering techniques to obtain uniform heating of spherical metal objects in an induction furnace. Office of Scientific and Technical Information (OSTI), August 1993. http://dx.doi.org/10.2172/10181898.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yousuf, A. Induction heating of a spherical aluminum moderator vessel for the Advanced Neutron Source (ANS). Office of Scientific and Technical Information (OSTI), September 1994. http://dx.doi.org/10.2172/179296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rios, Orlando, Balasubramaniam Radhakrishnan, George Caravias, and Matthew Holcomb. Additive Manufacturing/Diagnostics via the High Frequency Induction Heating of Metal Powders: The Determination of the Power Transfer Factor for Fine Metallic Spheres. Office of Scientific and Technical Information (OSTI), March 2015. http://dx.doi.org/10.2172/1224158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cox, Benjamin, Webster Floyd, John Rushing, Thomas Carr, and Craig Rutland. Feasibility investigation of inductive heating of asphalt repair materials. Engineer Research and Development Center (U.S.), April 2020. http://dx.doi.org/10.21079/11681/36115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Induction heating' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography