Relevant bibliographies by topics / Induction motor performance

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Induction motor performance'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Induction motor performance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Induction motor performance"

1

Singh, Yaduvir, Darshan Singh, and Dalveer Kaur. "Performance Comparison of PI and Fuzzy-PI Logic Speed Control of Induction Motor." INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY 6, no. 3 (March 5, 2013): 400–413. http://dx.doi.org/10.24297/ijct.v6i3.4464.

Full text
Abstract:
Single-phase induction motors are also used extensively for smaller loads. Speed control of induction motor has beenimplemented using PI (Proportional-Integral) controller and Fuzzy PI controller in Simulink MATLAB. The results showthat induction motor Fuzzy-PI speed control method results in a quicker response with no overshoot than the conventional PI controller. The settling time of induction motor Fuzzy-PI speed is better than the conventional PI controller. The integral time of weighted absolute error (ITEA) performance criteria also shows that the induction motor Fuzzy-PI speed control has better performance. Moreover, the induction motor Fuzzy-PI speed control has a strong ability to adapt to the significant change of system parameters.
APA, Harvard, Vancouver, ISO, and other styles
2

Syahputra, Ramadoni, Hedi Purwanto, Rama Okta Wiyagi, Muhamad Yusvin Mustar, and Indah Soesanti. "Analysis of Induction Motor Performance Using Motor Current Signature Analysis Technique." Journal of Electrical Technology UMY 5, no. 1 (July 21, 2021): PRESS. http://dx.doi.org/10.18196/jet.v5i1.11764.

Full text
Abstract:
This paper discusses the analysis of the performance of an induction motor using the motor current signature analysis (MCSA) technique. Induction motor is a type of electric machine that is widely used in industry. One of the industries that utilize induction motors is a steam power plant (SPP). The role of induction motors is very vital in SPP operations. Therefore, it is necessary to monitor the performance, stability, and efficiency to anticipate disturbances that can cause damage or decrease the life of the induction motor. MCSA is a reliable technique that can be used to analyze damage to an induction motor. In this technique, the induction motor current signal is detected using a current transducer. The signal is then passed on to the signal conditioning and then into the data acquisition device. The important signal data is analyzed in adequate computer equipment. The results of this analysis determine the condition of the induction motor, whether it is normal or damaged. In this research, a case study was carried out at the Rembang steam power plant, Central Java, Indonesia. The results of the analysis of several induction motors show that most of them are in normal conditions and are still feasible to operate.
APA, Harvard, Vancouver, ISO, and other styles
3

Tubbs, S. P. "Superconducting synchronous induction motor performance." IEE Proceedings B Electric Power Applications 137, no. 2 (1990): 120. http://dx.doi.org/10.1049/ip-b.1990.0012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bakhti, Ibtissem, Souad Chaouch, and Abdesselam Maakouf. "High performance backstepping control of induction motor with adaptive sliding mode observer." Archives of Control Sciences 21, no. 3 (January 1, 2011): 331–44. http://dx.doi.org/10.2478/v10170-010-0047-y.

Full text
Abstract:
High performance backstepping control of induction motor with adaptive sliding mode observerIt is well known that modern control of induction motor relies on a good dynamic model of the motor. Extensive research and activity have been devoted to the problem of induction motor control over the last decade. In this paper we introduce backstepping control with amelioration of performance to guarantee stability of the system. Accurate knowledge of the rotor speed and flux position is the key factor in obtaining a high-performance and high-efficiency induction-motor drive. Thus a sliding mode observer design is presented. Simulation results are included to illustrate good performance of backstepping control of sensorless induction motors with flux observer.
APA, Harvard, Vancouver, ISO, and other styles
5

Raj P R, Neethu, and Vasanthi V. "Performance Analysis of Photovoltaic Induction Motor Drive for Agriculture Purpose." International Journal of Power Electronics and Drive Systems (IJPEDS) 7, no. 4 (December 1, 2016): 1252. http://dx.doi.org/10.11591/ijpeds.v7.i4.pp1252-1260.

Full text
Abstract:
<p>This paper presents water pumping system using renewable source (solar) without the use of chemical storage batteries. In this converter-inverter circuit is used to drive Induction motor. The Converter used here is Two Inductor boost converter (TIBC), which consists of a resonant tank, voltage doubler rectifier and a snubber circuit. TIBC is designed to drive the three phase induction motor from PV energy. TIBC converter is also known as current fed multi resonant converter having high voltage gain and low input current ripple. Converter switches are controlled through hysteresis controller and ZCS resonant topologies. Solar PV power fluctuates according to irradiation level of sunlight and hence tracking of maximum power at all time is mandatory. SPWM control with third harmonic injection is used to trigger the IGBT’s in the inverter. The development is oriented to achieve a more efficient, reliable, maintenance free and cheaper solution than the standard ones, that uses DC motors or low voltage synchronous motors. The proposed method is verified with MATLAB/SIMULINK and the system simulation confirms the performance of the proposed system.</p>
APA, Harvard, Vancouver, ISO, and other styles
6

Vaimann, Toomas, Ants Kallaste, and Aleksander Kilk. "Sensorless Detection of Induction Motor Rotor Faults Using the Clarke Vector Approach." Scientific Journal of Riga Technical University. Power and Electrical Engineering 28, no. 1 (January 1, 2011): 43–48. http://dx.doi.org/10.2478/v10144-011-0007-9.

Full text
Abstract:
Sensorless Detection of Induction Motor Rotor Faults Using the Clarke Vector ApproachDue to their rugged build, simplicity and cost effective performance, induction motors are used in a vast number of industries, where they play a significant role in responsible operations, where faults and downtimes are either not desirable or even unthinkable. As different faults can affect the performance of the induction motors, among them broken rotor bars, it is important to have a certain condition monitoring or diagnostic system that is guarding the state of the motor. This paper deals with induction motor broken rotor bars detection, using Clarke vector approach.
APA, Harvard, Vancouver, ISO, and other styles
7

Shen, Cuifeng, and Hanhua Yang. "A High Performance of Induction Motor Drive System." Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) 13, no. 8 (December 3, 2020): 1129–34. http://dx.doi.org/10.2174/2352096513999200505110457.

Full text
Abstract:
Background: A multi-motor synchronous drive control system is widely used in many fields, such as electric vehicle drive, paper making, and printing. Methods: On the basis of the optimized structure of ADRC, a fuzzy first-order active disturbance rejection controller was developed. Double channels compensation of extended state observer was employed to estimate and compensate the total disturbances, and an approximate linearization and deterministic system was obtained. As the parameters of ADRC are adjusted online by a fuzzy controller, the performance of the controller is effectively improved. Results: Based on the SIMATIC S7-300 induction motor control experimental platform, the performances of anti-interference and tracking performance are tested. Conclusion: The actual experimental results indicated that compared with PID control, induction motor drive system controlled by fuzzy ADRC has higher dynamic and static status and following performances and stronger anti-interference abilities.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Feng Ge, and Hong Yong Xia. "Dynamic Simulation Analysis of Heavy Load Starting Light Load Running Induction Motor with High-Performance." Advanced Materials Research 588-589 (November 2012): 526–29. http://dx.doi.org/10.4028/www.scientific.net/amr.588-589.526.

Full text
Abstract:
For the problem of heavy load starting induction motors in operation efficiency and power factor are low, a kind of heavy load starting light load running induction motor with high-performance is presented. In order to study the feasibility of this motor, the state equation of the motor is established and the dynamic simulation program of the motor is compiled. Finally, the program is simulated using software and the simulation result is analyzed.
APA, Harvard, Vancouver, ISO, and other styles
9

Taniguchi, K., Y. Takeda, and T. Hirasa. "High-performance slip-power recovery induction motor." IEE Proceedings B Electric Power Applications 134, no. 4 (1987): 193. http://dx.doi.org/10.1049/ip-b.1987.0033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ozcelik, Nezih Gokhan, Ugur Emre Dogru, Murat Imeryuz, and Lale T. Ergene. "Synchronous Reluctance Motor vs. Induction Motor at Low-Power Industrial Applications: Design and Comparison." Energies 12, no. 11 (June 8, 2019): 2190. http://dx.doi.org/10.3390/en12112190.

Full text
Abstract:
Although three-phase induction motors are the most common motor type in industry, a growing interest has arisen in emerging electric motor technologies like synchronous reluctance motors and permanent magnet motors. Synchronous reluctance motors are a step forward compared to permanent magnet motors when the cost of the system is considered. The main focus of this study is low-power industrial applications, which generally use three-phase induction motors. In this study, the synchronous reluctance motor family is compared at three different power levels: 2.2 kW, 4 kW, and 5.5 kW. The aim of this study is to design and compare synchronous reluctance motors, which can be alternative to the reference induction motors. Finite element analysis is performed for the reference induction motors initially. Their stators are kept the same and the rotors are redesigned to satisfy output power requirements of the induction motors. Detailed design, analysis, and optimization processes are applied to the synchronous reluctance motors considering efficiency, power density, and manufacturing. The results are evaluated, and the optimized designs are chosen for each power level. They are prototyped and tested to measure their performance.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Induction motor performance"

1

Wong, Kwan Butt Albert. "Aspects of single-phase motor performance." Thesis, University of Cambridge, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Blasco, Giménez Ramón. "High performance sensorless vector control of induction motor drives." Thesis, University of Nottingham, 1995. http://eprints.nottingham.ac.uk/13038/.

Full text
Abstract:
The aim of this research project was to develop a vector controlled induction motor drive operating without a speed or position sensor but having a dynamic performance comparable to a sensored vector drive. The methodology was to detect the motor speed from the machine rotor slot harmonics using digital signal processing and to use this signal to tune a speed estimator and thus reduce or eliminate the estimator’s sensitivity to parameter variations. Derivation of a speed signal from the rotor slot harmonics using a Discrete Fourier Transform-based algorithm has yielded highly accurate and robust speed signals above machine frequencies of about 2 Hz and independent of machine loads. The detection, which has been carried out using an Intel i860 processor in parallel with the main vector controller, has been found to give predictable and consistent results duing speed transient conditions. The speed signal obtained from the rotor slot harmonics has been used to tune a Model Reference Adaptive speed and flux observer, with the resulting sensorless drive operating to steady state speed accuracies down to 0.02 rpm above 2 Hz (i.e. 60 rpm for the 4 pole machine). A significant aspect of the research has been the mathematical derivation of the speed bandwidth limitations for both sensored and sensorless drives, thus allowing for quantitative comparison of their dynamic performance. It has been found that the speed bandwidth limitation for sensorless drives depends on the accuracy to which the machine parameters are known and that for maximum dynamic performance it is necessary to tune the flux and speed estimator against variations in stator resistance in addition to the tuning mechanism deriving from the DFT speed detector. New dynamic stator resistance tuning algorithms have been implemented. The resulting sensorless drive has been found to have a speed bandwidth equivalent to sensored drives fitted with medium resolution encoders (i.e. about 500 ppr), and a zero speed accuracy of ± 8 rpm under speed control. These specifications are superior to any reported in the research literature.
APA, Harvard, Vancouver, ISO, and other styles
3

Davidson, Innocent Ewean Agbongiague. "Performance analysis for a shaded-pole linear induction motor." Doctoral thesis, University of Cape Town, 1998. http://hdl.handle.net/11427/21326.

Full text
Abstract:
Bibliography: pages 129-148.
The induction motor remains the prime mover of present day industry with it's associated components in drive applications. In many such applications, fractional horse-power motors find ready use in small mechanisms where three-phase power supply is not available. In Southern Africa, these motors can be used is rural areas with simple reticulation systems, hence the renewed interest in the development of these low-power electrical motors, especially specialised models such as linear versions of such motors for special applications. This research is in the area of single-phase LIMs. The objective has been to model the shaded-pole LIM, in an attempt to enhance it's performance through improved design methods. This was carried out using an integrated analysis approach, involving circuital and field theory in the analysis of the practical motor, and computer simulation of it's equivalent model using the finite element method. Linear counterparts are possible for all the various forms of rotating electrical machines. All cylindrical machines can be 'cut' along a radial plane and 'unrolled' [32]. LIMs convert electrical energy directly into mechanical energy of translatory motion. Some advantages of linear version of induction motors are: they are gearless and often require minimal material thus minimising cost. While their scope of application are somewhat limited when compared to rotary versions, they do however give excellent performance in special situations where translator motion is required. However, the output power-to-mass and output power-to-volume of active materials ratio is reduced compared to rotary induction motors[45]. These disadvantages are caused by the large air-gap and the open magnetic circuit, which produces parasitical effects.
APA, Harvard, Vancouver, ISO, and other styles
4

Müller, Markus Anton. "Improved calculation methods for particular aspects of induction motor performance." Thesis, University of Cambridge, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239100.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brown, Christopher P. (Christopher Perry). "Design for manufacturability of a high-performance induction motor rotor." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/38170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Karacan, Cuneyt. "Comparison Of Performance Of Switched Reluctance Motors, Induction Motors And Permanent Magnet Dc Motors." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12604925/index.pdf.

Full text
Abstract:
Since most of the electrical energy is consumed by the electrical motors, it is necessary to use the electrical energy as efficient as possible. Throughout this study four different types of motors (induction motor, permanent magnet radial flux DC motor, permanent magnet axial flux DC motor, switched reluctance motor) are considered and compared based on their torque per unit volume and speed performance comparison. Torque per unit volume equations are obtained for each of the motor, related to quantities such as magnetic flux density and electric loading and the speed performances are compared by using a washing machine application, which has a wide speed range. As a result of this study torque per unit volume and speed performance of each of these four types of motors are obtained and motors of different types are evaluated due to their torque per motor volume, torque per ampere, efficiency and etc. over a wide speed range to have an idea about the applications of these motors.
APA, Harvard, Vancouver, ISO, and other styles
7

Khumalo, Siboniso T. "Induction motor variable speed drive performance and impact on energy savings." Master's thesis, University of Cape Town, 2001. http://hdl.handle.net/11427/8751.

Full text
Abstract:
Bibliography: p. 132-134.
ESKOM, together with Municipalities distribute power at a line-to-line voltage of 400+/-10%. Hence in theory, the user ends up with a voltage of 340 to 440. In urban areas 2% voltage unbalance is considered acceptable, while 3% voltage unbalance is considered acceptable for rural areas. The combined effects of under or overvoltages coupled with "acceptable maximum" voltage unbalance is not understood or documented. This project is a comprehensive study of the effects of voltage unbalance in combination with under or overvoltages on induction machines (1M) variable speed drives. In addition the performance with PWM inverters connected to 1M via long cables is also studied. The project starts by an evaluation of previous work on the subject and related topics. Relevant conclusions are made based on the literature review in Chapter One. The second step of the project was to develop two test beds in the UCT Machine's Laboratory. The test beds are for performance testing of low (up to 15kW) and medium (up to 75kW) power 1M and their VSDs. The test bed losses are determined at 4 different operating points and documented. Several tests such as the blocked rotor and no load tests were undertaken to determine the machine parameters. A PSpice simulation model was developed and tested for the low voltage test bed. The test results compared well to simulation predictions. Furthermore, tests under unbalanced and overvoltage conditions were performed and the results verified with simulations. This proves that the developed PSpice model can reliably simulate the actual test bed for both balanced and unbalanced conditions. Moreover, it can be easily applied to model different size machines and drives. The information required includes: the motor parameters, drive dc-link parameters, modulation ratio (ma) and the switching frequency. The impact of voltage unbalance in drives with long cables between the inverter and motor is examined. A 36m long, 4-core, PVC insulated cable is used on the low voltage test bed for a case study. The model used for the cable is a lumped parameter model. The 1M model is also taken from the literature to include a high frequency branch, to model the reflected voltage wave phenomenon. A basic analysis of energy savings in pumps and fans load associated with the application of variable speed drives is also done. Boiler feed-pumps from Tutuka power station are used as a case study that may be replicated for other applications in utilities or industry. The developed Excel Spreadsheet program to project the value of savings and determine the payback period is compared to an ABB program. The two results agree within an acceptable range. Therefore, the knowledge of the pumping system specifications and the cost of energy in kWh with the Energy Savings Program would enable one to project energy savings.
APA, Harvard, Vancouver, ISO, and other styles
8

Bal, Gungor. "Performance analysis of field-orientation controlled induction motor with parameter adaptation." Thesis, University of Strathclyde, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.392468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Thongam, Jogendra Singh. "Commande de haute performance sans capteur d'une machine asynchrone = High performance sensorless induction motor drive." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 2006. http://theses.uqac.ca.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Norman, Rosemary Anne. "High-performance current regulation for voltage-source-inverter-fed induction motor drives." Thesis, University of Bradford, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.514187.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Induction motor performance"

1

Bird, Ian Gerard. Enhanced direct torque control for high dynamic performance induction motor drives. Birmingham: University of Birmingham, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lesan, S. Performance loci of a three-phase induction motor with secondary impedance control. Bradford: University of Bradford, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bell, A. Graham. Forced induction performance tuning. Sparkford: Haynes, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Aḥmad, Sayyid Muk̲h̲tār. High performance AC drives: Modelling analysis and control. London: Springer Verlag, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Veinott, Cyril G. Theory and design of small induction motors: An introduction to the engineering principles and characteristics, theory, design, and performance calculations of split-phase, capacitor, and polyphase induction motors in the fractional-horsepower and small integral-horsepower ranges. Rolla: University of Missouri, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Haataja, Jorma. A comparative performance study of four-pole induction motors and synchronous reluctance motors in variable speed drives. Lappeenranta, Finland: Lappeenranta University of Technology, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liang, Darwin Tat Wai. Analysis of induction motor performance with voltage control. Bradford, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Performance and Design of Induction Motor Drives (Power Engineering Series). CRC, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

High Performance AC Drives: Modelling Analysis and Control. Springer, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ahmad, Mukhtar. High Performance AC Drives: Modelling Analysis and Control. Springer, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Induction motor performance"

1

Ahmad, Mukhtar. "Vector Control of Induction Motor Drives." In High Performance AC Drives, 47–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13150-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Menghal, P. M., and A. Jaya Laxmi. "Neural Network Based Dynamic Performance of Induction Motor Drives." In Advances in Intelligent Systems and Computing, 539–51. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-1768-8_48.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Srinivasan, S., and A. Sabari Raja. "New Direct Torque Control Algorithm for High Performance Induction Motor." In Lecture Notes in Electrical Engineering, 523–33. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-2119-7_52.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yadav, Megha, and Vijay Kumar Tayal. "Performance Enhancement of Induction Motor Using PID Controller with PID Tuner." In Lecture Notes in Mechanical Engineering, 783–93. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6577-5_76.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Siddiqui, Khadim Moin, Mohd Khursheed, Rafik Ahmad, and Fazlur Rahman. "Performance Assessment of Variable Speed Induction Motor by Advanced Modulation Techniques." In Lecture Notes in Electrical Engineering, 729–37. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4080-0_70.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vivek Sharma, Ashutosh Bhatt, Nikita Rawat, and Shobhit Garg. "Performance Analysis of Interleaved Coupled Inductor Boost DC–DC Converter Fed Induction Motor Drive." In Proceeding of International Conference on Intelligent Communication, Control and Devices, 259–65. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1708-7_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ghosh, Sourav, and Tapas Kumar Saha. "Development and Performance Analysis of Stand-Alone PV-Based Induction Motor Drive." In Advances in Communication, Devices and Networking, 747–54. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7901-6_81.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Yi, Guohai Liu, Haifeng Wei, and Wenxiang Zhao. "High-Performance Speed Control of Induction Motor Using Combined LSSVM Inverse System." In Lecture Notes in Electrical Engineering, 23–30. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-2169-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tong, Tao, Jinlin Gong, Yadong Gao, and Nicolas Bracikowski. "Performance and Thermal Analysis of Five-Phase Linear Induction Motor Optimal Control." In Lecture Notes in Electrical Engineering, 563–70. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7986-3_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dekhandji, Fatma Zohra, and Larbi Refoufi. "Performance of Induction Motor Under the Effect of Voltage Unbalance with Loading Consideration." In Progress in Clean Energy, Volume 2, 711–19. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17031-2_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Induction motor performance"

1

Watanabe, E. "High performance motor drive using matrix converter." In IEE Seminar on Advances in Induction Motor Control. IEE, 2000. http://dx.doi.org/10.1049/ic:20000387.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Valderrabano-Gonzalez, Antonio, Julio Cesar Rosas-Caro, F. Beltran-Carbajal, I. Lopez-Garcia, Ruben Tapia-Olvera, and Hossam A. Gabbar. "Large Induction Motor Drive Performance Comparison." In 2018 IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC). IEEE, 2018. http://dx.doi.org/10.1109/ropec.2018.8661352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Majid, Md Shah, Hasimah A. Rahman, Mohammad Yusri Hassan, L. C. Seng, and N. C. Ern. "Software Development for Induction Motors - Performance and High Efficiency Motor." In 2006 IEEE International Power and Energy Conference. IEEE, 2006. http://dx.doi.org/10.1109/pecon.2006.346633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Marane, Pramod P., S. A. Deokar, and Vishal L. Tathe. "Induction motor performance improvement using stator skewing." In 2016 International Conference on Automatic Control and Dynamic Optimization Techniques (ICACDOT). IEEE, 2016. http://dx.doi.org/10.1109/icacdot.2016.7877713.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rajinder, Mini Sreejeth, and Madhusudan Singh. "Sensitivity analysis of induction motor performance variables." In 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES). IEEE, 2016. http://dx.doi.org/10.1109/icpeices.2016.7853609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yu, Wen-juan, Dong Liu, Jin Huang, and Min Kang. "Performance Analysis of Multiphase Induction Motor Drive." In 2010 International Conference on Electrical and Control Engineering (ICECE). IEEE, 2010. http://dx.doi.org/10.1109/icece.2010.1310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Aree, Pichai. "Starting performance of induction motor under isolated self-excited induction geneator." In 2015 12th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON). IEEE, 2015. http://dx.doi.org/10.1109/ecticon.2015.7207046.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Induction motor control system performance under magnetic saturation." In Proceedings of the 1999 American Control Conference. IEEE, 1999. http://dx.doi.org/10.1109/acc.1999.786114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nave-Segura, A., J. Rodriguez-Rivas, J. Ortega-Cuevas, and O. Diaz-Gonzalez. "Dynamic performance of an induction motor driven trolleybus." In Proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems. PEDS'99 (Cat. No.99TH8475). IEEE, 1999. http://dx.doi.org/10.1109/peds.1999.794599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sarwer, Zeeshan, Mohd Sartaj, M. Rizwan Khan, Mohammad Zaid, and Umair Shahajhani. "Comparative Performance Study of Five-Phase Induction Motor." In 2019 Innovations in Power and Advanced Computing Technologies (i-PACT). IEEE, 2019. http://dx.doi.org/10.1109/i-pact44901.2019.8960232.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Induction motor performance' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography