Log in

Relevant bibliographies by topics / Industrial Electrical Installation / Journal articles

To see the other types of publications on this topic, follow the link: Industrial Electrical Installation.

Journal articles on the topic 'Industrial Electrical Installation'

Author: Grafiati

Published: 5 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Industrial Electrical Installation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Anggi, Jumiati Ilham, and Amirudin Yunus Dako. "Evaluasi Sistem Instalasi Tenaga Listrik berdasarkan Standar PUIL 2011 (Studi Kasus Pada PT. Multi Nabati Sulawesi Luwuk)." Research Review: Jurnal Ilmiah Multidisiplin 4, no. 1 (2025): 277–88. https://doi.org/10.54923/researchreview.v4i1.141.

Full text

Abstract:

Electrical power installation systems in the industrial sector require proper planning in accordance with the General Electrical Installation Requirements (PUIL 2011). Common issues in industrial electrical installation systems include voltage drop on the load side, unbalanced loads, and low power factor during power distribution and utilization. Therefore, this study aims to evaluate the electrical power installation system at PT. Multi Nabati Sulawesi-Luwuk to ensure it operates effectively and efficiently while addressing potential disturbances. The research employs an evaluation method con

APA, Harvard, Vancouver, ISO, and other styles

2

Spunei, E., I. Piroi, and F. Piroi. "Efficiency of a small power photovoltaic installation connected to the low voltage network." Journal of Physics: Conference Series 2212, no. 1 (2022): 012020. http://dx.doi.org/10.1088/1742-6596/2212/1/012020.

Full text

Abstract:

Abstract Deploying photovoltaic installations to cover the electrical energy requirements of home and industrial consumer is both a national and an international trend. The aim of the research is to analyse the efficiency of the photovoltaic installation based on recordings and measurements. In this work, we present a case study for a 40 kW photovoltaic installation deployed for an industrial consumer. For a period of eleven days, we measured the energy levels that the consumer absorbed both from the national energy network and from the photovoltaic installation. We conclude that the photovolt

APA, Harvard, Vancouver, ISO, and other styles

3

Febrialita, Nadilla, and Elfizon Elfizon. "Pengembangan Jobsheet Berbasis Project Technopreneurship pada Mata Kuliah Instalasi Listrik Industri." Jurnal Pendidikan Teknik Elektro 2, no. 2 (2021): 82–85. http://dx.doi.org/10.24036/jpte.v2i2.118.

Full text

Abstract:

Industrial electrical installation practice is a course in the electrical engineering department of Padang State University that must be taken by students. The learning process in the Industrial Electrical Installation course has not fostered the spirit of Technopreneurship because it still prioritizes the achievement of competence in the industry. The existing job sheets are good but have not been able to bring students to the level of entrepreneurship. Where the entrepreneurial spirit is very lacking for students which will later be beneficial for students who want to develop technopreneursh

APA, Harvard, Vancouver, ISO, and other styles

4

Gabova, M. A., O. K. Nikolsky, and M. V. Guner. "The expert system for assessing fire risks of electrical installations in the agrarian industrial complex based on neural networks." Journal of Physics: Conference Series 2142, no. 1 (2021): 012005. http://dx.doi.org/10.1088/1742-6596/2142/1/012005.

Full text

Abstract:

Abstract The article is devoted to the analysis of fire risks of the operation of electrical installations in the agro-industrial complex of the region. According to statistics, the number of fires occurring for electrical reasons is steadily increasing, which makes the issue of fire risk management relevant. In order to identify and prevent these risks, a technogenic safety system has been developed, presented as a set of methods and tools, which are based on the generation of new data on the causes of threats to the operation of electrical installations based on the analysis of data on the c

APA, Harvard, Vancouver, ISO, and other styles

5

Yuniarti, Nurhening, Djoko Laras Budiyo Taruno, Muhamad Ali, Toto Sukisno, and Muhfizaturrahmah Muhfizaturrahmah. "Development of an Industrial Electrical Installation Training Unit." Jurnal Edukasi Elektro 7, no. 2 (2023): 87–103. http://dx.doi.org/10.21831/jee.v7i2.60431.

Full text

Abstract:

The purpose of this study is to obtain a modular unit for training and instruction in industrial electrical installations as a suitable learning media. This study uses research and development (RD) with ADDIE model, which consists of five phases: analysis, design, development, implementation, and evaluation. The research subject is Diploma 4 student in Department of Electrical Engineering Education, Faculty of Engineering, Universitas Negeri Yogyakarta. The research result as follows. (1) Manufacture of industrial electrical equipment training module products. (2) Application program feasibili

APA, Harvard, Vancouver, ISO, and other styles

6

Zhu, Li Juan, and Yan Ming Gao. "Modern Industrial Plant Electrical Grounding System Design and Installation." Advanced Materials Research 889-890 (February 2014): 332–35. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.332.

Full text

Abstract:

With the development of economy and society, there are more and more modern industrial workshop, electricity is the main energy of a modern industrial workshop. Ensure the safety of the power of the industrial building is a key consideration in the design of industrial distribution, and an important content of the healthy development of the industry. There are many problems in the current electrical system, these problems are associated with grounding system with large and small, so in the electrical system, grounding system installation process to ensure that the electrical use one of the mai

APA, Harvard, Vancouver, ISO, and other styles

7

Nikolsky, Oleg, Vadim Faranosov, Dmitry Surinsky, and Evgeniy Uskov. "Multicriteria assessment of anthropogenic risk of electrical installations based on simulation modeling." АгроЭкоИнфо 1, no. 61 (2024): 5. http://dx.doi.org/10.51419/202141105.

Full text

Abstract:

Risk management in a human-machine system is considered. The basic models and methods of decision-making, “man - electrical installation - environment” are presented. The method of risk analysis is considered. An expert software complex is proposed that implements the risk assessment of electrical installations. Keywords: HUMAN-MACHINE SYSTEM, RISK MANAGEMENT, ELECTRICAL INSTALLATION, MULTICRITERIA ANALYSIS, RISK ANALYSIS METHOD, “BOW TIE”, FIRE RISK OF ELECTRICAL INSTALLATIONS, SIMULATION MODEL

APA, Harvard, Vancouver, ISO, and other styles

8

Sabri, Muhammad, and Elfizon Elfizon. "Pengembangan Jobsheet Berbasis Industri pada Mata Kuliah Praktik Instalasi Listrik Industri." Jurnal Pendidikan Teknik Elektro 1, no. 1 (2020): 91–94. http://dx.doi.org/10.24036/jpte.v1i1.42.

Full text

Abstract:

Industrial Electrical Installation Practice is a subject in the Department of Electrical Engineering, Padang State University that must be taken by students. In practical implementation, they still use the old Jobsheet and have not used industry-based jobsheets, so students don't know much about existing equipment in the industry. The availability of industry-based jobsheets makes it easy for students to apply practical learning to Industry and get to know the many equipments in the Industry. For this reason, this study aims to produce a valid and practical industry-based jobsheet. The researc

APA, Harvard, Vancouver, ISO, and other styles

9

Zhang, Bai Jun. "Large-Scale Mechanical and Electrical Equipment Installation Project Management Research." Advanced Materials Research 655-657 (January 2013): 2363–66. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.2363.

Full text

Abstract:

The mechanical and electrical installation is a broad concept, involving a wide range, subjects span, although its inherent characteristics, but its versatility is also very strong. Only by grasping the electrical and mechanical installation of construction technology and quality management, in order to increase enterprise efficiency, and improve the competitiveness of enterprises. This paper analyzes the characteristics of the mechanical and electrical installation projects, pointing out that the idea of the mechanical and electrical installation project management, summed up the connotation

APA, Harvard, Vancouver, ISO, and other styles

10

Priyanto, Aulia, and Dwiprima Elvanny Myori. "Kesiapan Kerja Setelah Melaksanakan Praktek Kerja Industri Siswa Kelas XII SMK Negeri 2 Solok." TSAQOFAH 4, no. 3 (2024): 1634–40. http://dx.doi.org/10.58578/tsaqofah.v4i3.2922.

Full text

Abstract:

This research aims to determine the impact of industrial work practices on the readiness for work among 12th-grade students in electrical installation engineering at SMK Negeri 2 Solok. This study falls under quantitative research, with the research subjects being 26 12th-grade students in electrical installation engineering at SMK Negeri 2 Solok. Data collection was done through questionnaires and documentation. The questionnaire was used to measure variables related to industrial work practices, student readiness, and the location of industrial work practice. Data analysis was conducted usin

APA, Harvard, Vancouver, ISO, and other styles

11

Cazacu, Emil, Lucian Petrescu, and Maria-Cătălina Petrescu. "THE MAJOR PREDICTIVE MAINTENANCE ACTIONS OF THE ELECTRIC EQUIPMENTS IN THE INDUSTRIAL FACILITIES." Scientific Bulletin of Electrical Engineering Faculty 18, no. 1 (2018): 26–33. http://dx.doi.org/10.1515/sbeef-2017-0018.

Full text

Abstract:

Abstract In modern low-voltage electrical installations, the predictive maintenance of the major electrical equipments involved in the power delivery process (transformers) or in the conversion of the electrical energy (especially electric motors) becomes mandatory. Thus, a high level of reliability and safety is assured for both the electric facility and operators. The proactive maintenance is to be non-invasively performed and mainly requires an infrared (IR) thermographic inspection and power quality analysis of the installation loads. A vibration investigation is also necessary for the mot

APA, Harvard, Vancouver, ISO, and other styles

12

Romanov, I. V., R. N. Zadorozhniy, and E. Yu Kudryashova. "MODERNIZATION OF THE INSTALLATION FOR ELECTRIC EROSION DISPERSION." Tekhnicheskiy servis mashin, no. 2 (August 11, 2023): 157–64. http://dx.doi.org/10.22314/2618-8287-2023-61-2-157-164.

Full text

Abstract:

Very often, powders of metals and alloys are used in the technologies of repair and restoration of parts, as well as when creating new parts. With the development of mechanical engineering, high requirements are imposed on such materials, which are associated with certain physico-chemical and granulometric indicators. Currently, a large number of different methods for producing metal powders are known. Many of them have a number of disadvantages: high energy consumption, irregular particle shape, the presence of impurities. The method of electroerosive dispersion is one of the most energy-effi

APA, Harvard, Vancouver, ISO, and other styles

13

Rifandi, Ahmad, and Arief Wisaksono. "Implementation of Ventilation Panel Installation." Procedia of Engineering and Life Science 7 (March 13, 2024): 310–15. http://dx.doi.org/10.21070/pels.v7i0.1474.

Full text

Abstract:

Abstract. Electrical panels are an important component in industry, which provides security to electrical installations in various industrial sectors. Large-scale companies dominate this industry to meet the high needs of consumers and maintain the quality and security of electrical installations. Electric panels must be installed carefully, pay attention to the surrounding environment, and play an important role in controlling ventilation to regulate the temperature and air conditions inside the cage. This research uses qualitative methods to understand the process of making ventilation panel

APA, Harvard, Vancouver, ISO, and other styles

14

Yusrizal, Firman, and Usmeldi Usmeldi. "Pengaruh Praktik Kerja Industri Terhadap Kompetensi Siswa Teknik Instalasi Tenaga Listrik di Sekolah Menengah Kejuruan." Jurnal Pendidikan Teknik Elektro 5, no. 1 (2024): 152–57. https://doi.org/10.24036/jpte.v5i1.433.

Full text

Abstract:

This research is motivated by industrial work practices on the competence of class XII students with a significant influence. The aim of this research is to determine the influence of industrial work practices on the competency of class XII Electrical Power Installation Engineering students at SMK Negeri 1 West Sumatra. This research uses a quantitative approach with an associative type of research. The subjects of this research were class XII students in Electrical Installation Engineering at SMK 1 West Sumatra. The type of data and data collection is in the form of a questionnaire and data a

APA, Harvard, Vancouver, ISO, and other styles

15

Sumarno, Edy, Jan Setiawan, Irawati Irawati, Deasy Kartikasari, and Ria Gazali. "Page Header ADDITIONAL MENU FOCUS AND SCOPE PEER REVIEW PROCESS PRIVACY STATEMENT COPYRIGHT NOTICE PUBLICATION FREQUENCY PUBLICATION ETHICS AUTHOR GUIDELINES ONLINE SUBMISSION EDITORIAL TEAM REVIEWER AUTHOR FEES CONTACT ARTICLE TEMPLATE SUGGESTED TOOLS OUR VISIT STATISTICS Flag Counter User Username Password Remember me Home About Login Register Search Current Archives Home > Vol 2, No 2 (2024) > Sumarno PEMASANGAN INSTALASI LISTRIK DI MUSOLLAH NURUL FADILLAH KECAMATAN MAJA, LEBAK BANTEN." Swadimas : Jurnal Pengabdian Kepada Masyarakat 2, no. 2 (2024): 11–17. http://dx.doi.org/10.56486/swadimas.vol2no2.547.

Full text

Abstract:

Electricity is a major requirement for all levels of society, both industrial and household. Electrical installations in homes or offices must be installed safely based on predetermined standards to avoid unwanted things such as electric shock and fires caused by electrical short circuits, which result in material losses and even loss of life. The installation of electrical installations in residential houses is almost the same as the installation of electrical installations in the Village Hall office. In this case, it is necessary to install and maintain electrical installations in accordance

APA, Harvard, Vancouver, ISO, and other styles

16

Azeredo Seidel, Daniel. "A IMPORTÂNCIA DO PRONTUÁRIO DE INSTALAÇÕES ELÉTRICAS (PIE) NA INDÚSTRIA: LIÇÃO APRENDIDA COM ACIDENTE REAL." Revista Científica Semana Acadêmica 13, no. 258 (2025): 1–12. https://doi.org/10.35265/2236-6717-258-13164.

Full text

Abstract:

Industrial safety is crucial, considering the high cost of accidents that affect both the victims and the companies, as well as society. Brazil records over 600,000 workplace accidents annually, with a notable 2,089 electrical accidents in 2023. The implementation of Electrical Installation Dossier (EID) is a vital strategy to prevent or minimize tragedies, saving lives and protecting company assets. Regulatory Standard NR-10, which governs safety in electrical installations, requires the preparation and maintenance of the EID, a fundamental document to ensure worker safety. Failure to impleme

APA, Harvard, Vancouver, ISO, and other styles

17

Irawati, Irawati, Edy Sumarno, Juhana Juhana, Deasy Kartikasari, and Ria Gazali. "PEREMAJAAN INSTALASI LISTRIK DI MASJID BABUSALAM PERUMAHAN DARU ESTATET, MEKAR SARI, KEC, JEMBE, KABUPATEN TANGERANG, BANTEN." SWADIMAS JURNAL PENGABDIAN KEPADA MASYARAKAT 3, no. 1 (2025): 51–56. https://doi.org/10.56486/swadimas.vol3no1.682.

Full text

Abstract:

Electricity is a fundamental need for all levels of society, ranging from industrial requirements to basic household necessities. Ensuring the safety of electrical installations in homes or offices is crucial, as these systems must comply with established standards to prevent incidents such as electric shocks and fires caused by short circuits, which can lead to significant material losses and even fatalities. Despite this, many communities lack adequate knowledge about proper electrical installation and maintenance procedures, increasing the risk of fires and electrocution. To address these i

APA, Harvard, Vancouver, ISO, and other styles

18

Elfizon, M. Muskhir, and Asnil. "Development of Industrial Electrical Installation Trainer Nuanced To Training within Industry for Students of Electrical Industrial Engineering Universitas Negeri Padang." Journal of Physics: Conference Series 1165 (February 2019): 012014. http://dx.doi.org/10.1088/1742-6596/1165/1/012014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Możaryn, Jakub Filip, Michał Frątczak, Krzysztof Stebel, et al. "Stealthy Cyberattacks Detection Based on Control Performance Assessment Methods for the Air Conditioning Industrial Installation." Energies 16, no. 3 (2023): 1290. http://dx.doi.org/10.3390/en16031290.

Full text

Abstract:

This paper aims to study the workflow of the detection centre of stealthy attacks on industrial installations that generate an increase in energy consumption. Such long-lasting, undetected attacks on industrial facilities make production more expensive and less competitive or damage the installation in the long term. We present the concept of the remote detection system of cyberattacks directed at maliciously changing the controlled variable in an industrial process air conditioning system. The monitored signals are gathered at the PLC-controlled installation and sent to the remote detection s

APA, Harvard, Vancouver, ISO, and other styles

20

Suprapto, Jaka, Chairul G. Irianto, and Riki Ruli A. Siregar. "Analisis Trafo Scott Mengatasi Penurunan Kapasitas Daya Akibat Distorsi Harmonik." Energi & Kelistrikan 12, no. 2 (2020): 90–99. http://dx.doi.org/10.33322/energi.v12i2.1085.

Full text

Abstract:

This study aims to determine Scott's transformer size which is suitable for use in the electrical system of the 4th Floor, F&G Building, Herry Hartanto Building, Faculty of Industrial Technology, Trisakti University. found in the electrical system. The research used is a quantitative and qualitative approach. This quantitative study was used because the researchers wanted to know and calculate the magnitude of the harmonics that occurred on the 4th Floor, F&G Building, Herry Hartanto, Faculty of Industrial Technology, Trisakti University and designed a single passive tuned filter param

APA, Harvard, Vancouver, ISO, and other styles

21

Fina Ayu Lestari, Ragil Febrian, Muamar Ilham Zaini, Rifqi Badruzzaman, and Afandhi Afandhi. "Strategi Penyelarasan Kurikulum Pembelajaran dengan Dunia Industri di Konsentrasi Teknik Instalasi Tenaga Listrik SMK Negeri 2 Pandeglang Tahun Ajaran 2023/2024." Simpati 1, no. 4 (2023): 161–65. http://dx.doi.org/10.59024/simpati.v1i4.466.

Full text

Abstract:

This research focuses on school strategies in aligning the learning curriculum with the industrial world in the Electrical Power Installation Engineering Concentration at SMK Negeri 2 Pandeglang for the 2023/2024 Academic Year. The curriculum used at SMK Negeri 2 Pandeglang is based on independent learning. The research method used is a qualitative research method, which involves collecting data by observation, interviews and documentation. The research results were obtained based on observations and interviews with the Deputy Principal for Curriculum and the Head of the Electrical Power Insta

APA, Harvard, Vancouver, ISO, and other styles

22

Cazacu, Emil, Marilena Stănculescu, and Horia Andrei. "On the Correction of the Power Factor in Modern Low-Voltage Power Electrical Installations." Scientific Bulletin of Electrical Engineering Faculty 17, no. 2 (2017): 10–15. http://dx.doi.org/10.1515/sbeef-2017-0003.

Full text

Abstract:

AbstractThe paper presents the main electrical loads that require reactive power, evaluating also its value in different operating states of the industrial installation (permanent sinusoidal or distorted). Also, the effects of reactive power flow in the networks are quantitatively estimated and accordingly, a series of specific power quality indicators (e.g. power factor, crest factor, total harmonic distortion) are highlighted. Different types of solutions dedicated to reduce the level of reactive power are also suggested. The proper design of the power factor correction systems is directly c

APA, Harvard, Vancouver, ISO, and other styles

23

Gabova, M. A., O. K. Nikolsky, and Yu D. Shlionskaya. "Automated fire risk evaluation of electrical installations in the man-machine system." IOP Conference Series: Materials Science and Engineering 1211, no. 1 (2022): 012017. http://dx.doi.org/10.1088/1757-899x/1211/1/012017.

Full text

Abstract:

Abstract The article considers approaches to the formation of a system of criteria for assessing the electrical installations fire condition of the agricultural and industrial complex. Based on the analysis of the literature, the conclusion is made about the appropriateness of the use of expert assessments. To implement the decision, a group of experts was assembled, on the basis of whose knowledge a list of 42 parametersζ characterizing the fire condition of the electrical installation was determined. To identify the relationships and form a method for calculating the estimated value of fire

APA, Harvard, Vancouver, ISO, and other styles

24

Kim, Donghyun, Soonwook Kwon, Chung-Suk Cho, Borja García de Soto, and Daeyoon Moon. "Automatic Space Analysis Using Laser Scanning and a 3D Grid: Applications to Industrial Plant Facilities." Sustainability 12, no. 21 (2020): 9087. http://dx.doi.org/10.3390/su12219087.

Full text

Abstract:

While industrial plant projects are becoming bigger, and global attention to the plant as a construct is increasing, space arrangement in plant projects is inefficient because of the complex structure of required facilities (e.g., complex MEP (mechanical, electrical, and plumbing) installations, specialized tools, etc.,). Furthermore, problems during installation, operation, and maintenance stages caused by inconsistencies between floor plans and actual layout are on the rise. Although some of these conflicts can be addressed through clash detection using BIM (building information modeling), q

APA, Harvard, Vancouver, ISO, and other styles

25

Y.N, Prof Burali. "“Paper on Basbar Trunking System for Electrical Supply to Industrial & commercial Installation”." IOSR Journal of Engineering 4, no. 1 (2014): 01–12. http://dx.doi.org/10.9790/3021-04160112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Muhammad Amiruddin, Imadudin Harjanto, Bambang Hadi Kunaryo, Margono Margono, and Nur Aksin. "Sosialisasi dan Pendampingan Pembenahan Instalasi Kelistrikan Panti Asuhan Sultan Fatah Ngaliyan Semarang." PaKMas: Jurnal Pengabdian Kepada Masyarakat 4, no. 1 (2024): 109–15. https://doi.org/10.54259/pakmas.v4i1.2630.

Full text

Abstract:

The need for electricity for human life is increasing day by day, both for daily living needs and industrial needs. In reality, electricity doesn't always work as expected, sometimes it goes out and disrupts activities, although not often, that's why it's necessary to have backup electricity, especially for those used by many people. The aim of this program is to provide understanding to all administrators and students of related orphanages about the safety of electrical installations and knowledge about generators as backup electrical power sources as well as assistance in installing and impr

APA, Harvard, Vancouver, ISO, and other styles

27

Mosorov, Volodymyr, Krzysztof Grudzień, and Dominik Sankowski. "FLOW VELOCITY MEASUREMENT METHODS USING ELECTRICAL CAPACITANCE TOMOGRAPHY." Informatics Control Measurement in Economy and Environment Protection 7, no. 1 (2017): 30–36. http://dx.doi.org/10.5604/01.3001.0010.4578.

Full text

Abstract:

The current methods of calculating the velocity field based on a twin-plane electrical capacitance system for multiphase flows are presented. The described methods allow to calculate the velocity profile of the multiphase flow in cross-section of industrial installation. The theoretical assumptions of the considered methods are also noticed. The main advantages and disadvantages of the authors’ flow velocity measurement methods are discussed.

APA, Harvard, Vancouver, ISO, and other styles

28

Hikmah, Saniyatul, Tri Rijanto, and Joko Joko. "Korelasi antara Pengalaman Praktik Kerja Industri, Hasil Belajar dan Kemandirian Belajar dengan Kesiapan Kerja Peserta Didik Sekolah Menengah Kejuruan." Jurnal Pendidikan Teknik Elektro 5, no. 2 (2024): 271–83. https://doi.org/10.24036/jpte.v5i2.445.

Full text

Abstract:

This study aims to identify the correlation between industrial work practice experience, learning outcomes of electric motor installation, and learning independence with the work readiness of TITL grade XII students, both individually and together. The type of research used is ex post facto with the population of students of the Electrical Power Installation Engineering (TITL) expertise program at SMKN 7 Surabaya and SMKN 2 Lamongan. The data collection technique involves the use of questionnaires for the variables of industrial work practice experience (X1), learning independence (X3), and jo

APA, Harvard, Vancouver, ISO, and other styles

29

Issabekov, Dauren Dzhambulovich, Zhassulan Bakutzhanovich Mussayev, Vadim Pavlovich Markovskiy, Aleksandr Petrovich Kislov, and Dariya Sansyzbayevna Urazalimova. "Reed Switch Overcurrent Protection: New Approach to Design." Energies 17, no. 11 (2024): 2481. http://dx.doi.org/10.3390/en17112481.

Full text

Abstract:

The problem of getting rid of expensive and metal-intensive current transformers has been declared by CIGRE as strategically important for the electric power industry. However, almost all traditional current protections receive information from measuring current transformers. In this work, a resource-saving reed switch overcurrent protection without current transformers is suggested, which can be used as an alternative to traditional current protections for 6–10 kV electrical installations connected to a switchgear cell. The protection is designed following the novel method we have developed b

APA, Harvard, Vancouver, ISO, and other styles

30

Sukardi, Sukardi, and Soenarto Soenarto. "ASESMEN INSTALATUR LISTRIK BERBASIS KEBUTUHAN INDUSTRI JASA KONSTRUKSI KETENAGALISTRIKAN." Jurnal Penelitian dan Evaluasi Pendidikan 19, no. 2 (2015): 202–16. http://dx.doi.org/10.21831/pep.v19i2.5580.

Full text

Abstract:

Penelitian ini bertujuan menghasilkan asesmen instalatur listrik (AILIS) berbasis industri jasa konstruksi ketenagalistrikan. Penelitian AILIS dikembangkan melalui tiga tahap, yaitu: desain atau perencanaan, uji coba terbatas, dan uji coba diperluas. Tahap desain meliputi: kegiatan prasurvei, studi hasil-hasil penelitian, analisis masalah, dan analisis kinerja instalatur listrik. Kegiatan tahap uji coba terbatas meliputi: validasi pakar dan pengguna, analisis dan revisi. Uji coba diperluas meliputi: pengumpulan data, analisis, revisi, dan diseminasi. Data penelitian dikumpulkan dengan mengguna

APA, Harvard, Vancouver, ISO, and other styles

31

Baer, C., C. Schulz, I. Rolfes, and T. Musch. "Dielectric waveguides for industrial radar applications." International Journal of Microwave and Wireless Technologies 7, no. 3-4 (2015): 399–406. http://dx.doi.org/10.1017/s1759078715000136.

Full text

Abstract:

In this paper, we present several dielectric waveguide (DWG) setups that enable the transition between radar front ends and antennas in challenging, industrial environments. Apart from good propagation behavior, DWG provide a nearly dispersion free transmission over large distances. Furthermore, they can be used as an electrical insulator in places with critical creep distances, in high temperature environments, and for applications with limited installation space. Fundamentals concerning the ideal propagation mode and adequate waveguide–fiber transitions are presented. Results of electromagne

APA, Harvard, Vancouver, ISO, and other styles

32

Alio, A. N., E. Ikoli, and B. U. Ezeora. "Power System Installation Skill Needs of Electrical Craftsmen in the Informal Sector of the Economy for Sustainable Self-Employment in South-South Nigeria." African Journal of Current Research 5, no. 3 (2024): 16–26. https://doi.org/10.5281/zenodo.13349271.

Full text

Abstract:

<em>The general purpose of the study was to determine industrial electrical installation skill needs of electrical craftsmen in the formal sector of the economy for sustainable self-employment in South-South Nigeria. One research question and a null hypothesis guided the study. The study was carried out in South-South States of Nigeria using a descriptive survey research design. The population for the study was 417 registered industrial Electrical installation craftsmen and master craftsmen in informal sector of economy in the South-South zone of Nigeria. Census sampling was used because the e

APA, Harvard, Vancouver, ISO, and other styles

33

Ajadi, Olabiyi Banji, Adegbola Amos Adekunle, and Kolawole Oladele Peter. "Identification of Hazards and Risk Assessment for a 40kVA Diesel Powered Lighting Set." Greener Journal of Science, Engineering and Technological Research 2, no. 2 (2012): 39–47. https://doi.org/10.15580/gjsetr.2012.2.1222.

Full text

Abstract:

The process of installing, operating and maintaining power sets carries with them occupational hazards, the hazards and risks associated with installation, operation and maintenance of diesel powered generator using a 40kVA generator was identified. The findings reveal that five major jobs or tasks were associated with the events of installation, operation and maintenance of any typical industrial standby generator. Hazards of varying degrees were identified with every section and jobbing of the whole activities. The associated risk was classification, about 60 percent high risk to 40 percent

APA, Harvard, Vancouver, ISO, and other styles

34

Nikolsky, Oleg, Vadim Faranosov, Dmitry Surinsky, and Evgeniy Uskov. "Methods for analyzing the safety of electrical installations in human-machine systems." АгроЭкоИнфо 1, no. 61 (2024): 4. http://dx.doi.org/10.51419/202141104.

Full text

Abstract:

Increasing the intensification of agricultural production and Improving the quality of life of the rural population is a priority in the development of the agricultural sector of the country's economy. In this regard, the problem reducing man-made threats of accidents and injuries to people, fires, as well as increasing the reliability and safety of electrical installations, including electrical networks and technological electrical equipment is currently important and timely. This problem is especially acute as a result of the aging of the industry's fixed assets. The electric power park of t

APA, Harvard, Vancouver, ISO, and other styles

35

Pedrero, Juan, Patxi Hernández, and Álvaro Martínez. "Economic Evaluation of PV Installations for Self-Consumption in Industrial Parks." Energies 14, no. 3 (2021): 728. http://dx.doi.org/10.3390/en14030728.

Full text

Abstract:

This paper presents an analysis of the economic performance of photovoltaic (PV) self-consumption systems at an industrial park in the Basque Country (north of Spain). The economic feasibility of the installations is largely dependent on self-consumption and compensation due to electricity injected into the grid, as well as the assumed evolution of the electricity prices. A sensitivity analysis is carried out for different installation sizes and different evolution scenarios concerning electricity prices. The potential for installations for shared self-consumption with dynamic and static distr

APA, Harvard, Vancouver, ISO, and other styles

36

Yerima, Abubakar Baba. "Effects of Reflective Inquiry Teaching Method on Students’ Academic Achievement in Domestic Installation Module in Technical Colleges of Yobe State, Nigeria." Middle Eastern Journal of Research in Education and Social Sciences 2, no. 1 (2021): 130–42. http://dx.doi.org/10.47631/mejress.v2i1.153.

Full text

Abstract:

Purpose: The study investigated the effects of reflective inquiry teaching method on students’ academic achievement in domestic installation modules in technical colleges of Yobe State, Nigeria. Methodology/Approach/Design: The study is quasi-experimental in design. A pre-test and post-test were conducted for both control and experimental groups. Two classes from four Technical Colleges were selected to give a sample size of 88. Electrical Installation and Maintenance Work Trade Achievement Test (EIMWTAT) was used to generate data for the study. The instrument was validated by three experts in

APA, Harvard, Vancouver, ISO, and other styles

37

Shatrov, A. F., T. B. Gaitova, N. A. Stushkina, O. V. Leshtayev, and N. A. Sergeeva. "Improving the reliability of power supply facilities in the agro-industrial sector." IOP Conference Series: Earth and Environmental Science 1070, no. 1 (2022): 012042. http://dx.doi.org/10.1088/1755-1315/1070/1/012042.

Full text

Abstract:

Abstract This article presents a system for monitoring and diagnosing the performance of operating equipment, in particular power transformers. Since power transformers are the main element of an electrical installation, the reliability of the power supply system depends on their technical state (TS). In our country one of the promising systems for monitoring and diagnostics is Transformer Diagnostics Monitor. The authors have considered the algorithm of this monitoring system and the possibility of its application in digital substations (DSs). Implementation of Transformer Diagnostics Monitor

APA, Harvard, Vancouver, ISO, and other styles

38

Faranosov, Vadim, Dmitry Surinsky, and Oleg Nikolsky. "Multi-criteria management of anthropogenic risks hazards of electrical installations." АгроЭкоИнфо 2, no. 56 (2023): 13. http://dx.doi.org/10.51419/202132213.

Full text

Abstract:

An approach to the construction of a decision support system (DSS) is considered, including object-oriented models and software tools using ontology – a model representing a computer form of a knowledge base (BZ) in the form of semantic (information-logical) networks. With the help of these networks, the interrelationships of components of a human-machine system with different physical nature (human, electrical installation, environment) are established. At the same time, ontologies perform an integral function, providing a general conceptual basis in decision-making processes in the subject a

APA, Harvard, Vancouver, ISO, and other styles

39

Tanjung, Abrar. "Evaluasi Sistem Pembebanan Sistem Kelistrikan Gedung Fakultas Ekonomi Universitas Lancang Kuning." Jurnal Sains, Teknologi dan Industri 18, no. 1 (2020): 24. http://dx.doi.org/10.24014/sitekin.v18i1.11271.

Full text

Abstract:

Electrical energy lines are the main needs in everyday life and for industrial needs. Because electrical energy channels are easy to send and convert into other forms of energy. The supply of stable and continuous electrical energy is an absolute requirement that must be met in meeting the needs of electric power. The Faculty of Economics building consists of two two-story buildings that are used for academic, administrative and lecture activities. The use of the room is equipped with electrical equipment, such as installation of air conditioners, lighting, computers, infocus and other additio

APA, Harvard, Vancouver, ISO, and other styles

40

Nazarbayev, Y., Zh Alipbayev, A. Karazhanov, and U. Kokayev. "Research of hybrid car technologies and conditions for choosing an electrical installation." BULLETIN of L.N. Gumilyov Eurasian National University. Technical Science and Technology Series 143, no. 2 (2023): 79–91. http://dx.doi.org/10.32523/2616-7263-2023-143-2-79-91.

Full text

Abstract:

It is known that in accordance with the rapid development of the industrial industry in the XX-XXI centuries, the use of oil and gas products has increased dramatically. This factor, in turn, has led to problems such as environmental pollution, changes in global temperatures, and a shortage of oil resources. For these reasons, car companies have begun to conduct research in order to introduce hybrid technologies into everyday life. The article examines the history of the emergence of hybrid technologies, as well as the principles and fundamentals of their functioning, as well as an overview of

APA, Harvard, Vancouver, ISO, and other styles

41

Lyakhomskii, Aleksandr, Anton Petrochenkov, Aleksandr Romodin, et al. "Assessment of the Harmonics Influence on the Power Consumption of an Electric Submersible Pump Installation." Energies 15, no. 7 (2022): 2409. http://dx.doi.org/10.3390/en15072409.

Full text

Abstract:

Oil production is a complex technological process that requires significant electricity consumption. The main electricity consumers in oil and gas production workshops are artificial lift facilities. Currently, among the objects of mechanized mining, installations of electric submersible pumps are widespread. When planning technological modes, it is necessary to be able to assess the change in the power consumption parameters when changing the technological process parameters. The paper proposes a typical replacement scheme for the electrical complex element. The power consumption calculation

APA, Harvard, Vancouver, ISO, and other styles

42

Moses, Dauda, Daniel Kaleb Diraso, Paul ShehuYaduma, and Danlami Agbu. "Industrial Installation Skills Acquired and Job Performance of Graduates of Electrical Installation and Maintenance Works Trade of Technical Colleges in North Eastern Nigeria." International Journal of Engineering and Science 06, no. 06 (2017): 01–08. http://dx.doi.org/10.9790/1813-0606020108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Zorić, Filip, Stjepan Flegarić, Goran Vasiljević, Stjepan Bogdan, and Zdenko Kovačić. "Autonomous Installation of Electrical Spacers on Power Lines Using Magnetic Localization and Special End Effector." Machines 11, no. 5 (2023): 510. http://dx.doi.org/10.3390/machines11050510.

Full text

Abstract:

The combined effects of environmental factors such as high winds and melting ice can cause transmission line conductors to vibrate at high amplitudes, resulting in damaged pole structures, cracked insulating strands, and short circuits. The manual installation of electrical spacers between the two power line conductors is currently the only way to prevent this, but due to the high-voltage environment, this operation is extremely dangerous for a human worker. As a solution to automate this operation, the autonomous installation of electrical spacers using a robotic manipulator is proposed. For

APA, Harvard, Vancouver, ISO, and other styles

44

Bow, Kenneth E., Brian K. Grosser, Gary L. Donner, and Thomas R. Russell. "An Overview of the Use and Installation of Electrical Databus Cable in an Industrial Process Plant." IEEE Transactions on Industry Applications IA-23, no. 3 (1987): 422–32. http://dx.doi.org/10.1109/tia.1987.4504928.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Alvarino, Natalia Ivaneth Luna, Vladimir Sousa Santos, and Jairo Ricardo González. "Design of Photovoltaic Systems in Industrial Electrical Systems Considering Power Quality." International Journal of Energy Economics and Policy 14, no. 3 (2024): 142–53. http://dx.doi.org/10.32479/ijeep.15770.

Full text

Abstract:

This paper presents a comprehensive design methodology for photovoltaic systems (PVS) integrated into industrial electrical systems (IES), with a specific focus on preserving power quality (PQ). The 10-step methodology, ranging from initial interviews to detailed technical, energy, and economic assessments, is novel for its multi-factorial approach that combines an Excel application with ETAP software, prioritizing considerations for PQ. Evaluation across four scenarios demonstrated varying outcomes. In the worst-case technical and energy scenario, PVS installation on Point of Common Connectio

APA, Harvard, Vancouver, ISO, and other styles

46

Maslov, V. A., L. A. Trofimova, and L. A. Dan. "RECYCLING AND UTILIZATION OF FE-C METALLURGICAL WASTES." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 1 (April 6, 2018): 96–99. http://dx.doi.org/10.21122/1683-6065-2018-1-96-99.

Full text

Abstract:

The work offers a comprehensive analysis of the dispersed metallurgical Fe-C containing wastes. The possibility with the help of high-temperature processing of the wastes to obtain a material with unique electrical and magnetic properties was shown. The results of laboratory studies allowed to develop the general scheme of complex processing of disperse metallurgical Fe-C containing wastes and to create on this basis the experimental-industrial installation.

APA, Harvard, Vancouver, ISO, and other styles

47

K., Jayavelu*. "IMPROVEMENT OF VOLTAGE QUALITY IN INDUSTRIAL DISTRIBUTION SYSTEMS." Global Journal of Engineering Science and Research Management 4, no. 7 (2017): 85–91. https://doi.org/10.5281/zenodo.836619.

Full text

Abstract:

This paper deals with the solution of the issue of exceeding the permissible levels for long-term flicker effect Plt in industrial distribution systems. Flicker effect in distribution systems is often exceeded as a result of the connection of electric arc furnaces, which exhibits high variable electrical power in-take. The article shows the benefits of measures on the steel plants, the distribution system operator and the transmission system operator. The main benefits were the installation SVC device and reconstruction of substation 220/110 kV to substation 400/110 kV. Measurements have shown

APA, Harvard, Vancouver, ISO, and other styles

48

Gámez Medina, José Manuel, Jorge de la Torre y Ramos, Francisco Eneldo López Monteagudo, et al. "Power Factor Prediction in Three Phase Electrical Power Systems Using Machine Learning." Sustainability 14, no. 15 (2022): 9113. http://dx.doi.org/10.3390/su14159113.

Full text

Abstract:

The power factor in electrical power systems is of paramount importance because of the influence on the economic cost of energy consumption as well as the power quality requested by the grid. Low power factor affects both electrical consumers and suppliers due to an increase in current requirements for the installation, bigger sizing of industrial equipment, bigger conductor wiring that can sustain higher currents, and additional voltage regulators for the equipment. In this work, we present a technique for predicting power factor variations in three phase electrical power systems, using machi

APA, Harvard, Vancouver, ISO, and other styles

49

Alio, A. N., E. Ikoli, and B. U. Ezeora. "Cable Conduit System Installation Skill Needs of Electrical Craftsmen in the Informal Sector of the Economy for Sustainable Self-Employment in South-South Nigeria." American Journal of Applied Sciences and Engineering 5, no. 2 (2024): 28–38. https://doi.org/10.5281/zenodo.13316948.

Full text

Abstract:

<em>The general purpose of the study was to determine industrial electrical installation skill needs of electrical craftsmen in the informal sector of the economy for sustainable self-employment in South-South Nigeria. One research question and a null hypothesis guided the study. The study was carried out in South-South States of Nigeria using a descriptive survey research design. The population for the study was 417 registered industrial Electrical installation craftsmen and master craftsmen in informal sector of economy in the South-South zone of Nigeria. Census sampling was used because the

APA, Harvard, Vancouver, ISO, and other styles

50

Basmanov, Vladislab, Ekaterina Kalinina, and Vyaceslav Cherepanov. "Reduction of Voltage Fluctuations in Electrical Networks Supplying Motors with a Rapidly Changing Load by Installing Longitudinal Compensation Batteries." Problems of the Regional Energetics, no. 3(59) (August 2023): 42–53. http://dx.doi.org/10.52254/1857-0070.2023.3-59.05.

Full text

Abstract:

The article deals with the reduction of voltage fluctuations in electrical networks of industrial enterprises with the help of longitudinal compensation batteries. The purpose of the article is to develop a method for calculating the optimal parameters of the longitudinal compensation installation, which makes it possible to perform calculations using numerical characteristics of the range of changes in the voltage and flicker dose. To achieve this goal, it is necessary to solve the following tasks: to develop a method for selecting the parameters of reducing voltage fluctuations, taking into

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!