Journal articles: 'Industrial surveying'

1

Pospíšilová, Lucie, Jiří Pospíšil, and Hana Staňková. "MICRO-NETWORK CREATION IN INDUSTRIAL SURVEYING." Geodesy and Cartography 38, no. 2 (June 29, 2012): 70–74. http://dx.doi.org/10.3846/20296991.2012.692216.

Full text

Abstract:

Industrial surveying is special field of work within engineering surveying. In this article we have documented some procedures and principles which are very special in industrial surveying. A micro-network consists of net points which are set as a base for all surveying in the industry. These points create coordinate system for all measured parts of the machine. For realization of micro-network are used well known geodetic methods such as triangulation, trilateration, levelling or trigonometric high. As horizontal and vertical controls do not exist in a factory hall, a surveyor has to find some different method to start working.

APA, Harvard, Vancouver, ISO, and other styles

2

Fraser, Clive S. "On the role of the surveying engineer in industrial measurement." CISM journal 44, no. 1 (April 1990): 56–60. http://dx.doi.org/10.1139/geomat-1990-0007.

Full text

Abstract:

Over the past five years or so three-dimensional coordinate measuring techniques traditionally associated with surveyors and photogrammetrists have gained a significant place in industrial metrology. Nowhere has this been more apparent than in the automobile, shipbuilding and aerospace manufacturing sectors in the U.S. From the outset, optical triangulation techniques such as digital theodolite systems and automated photogrammetry have been widely employed, but more recently laser trilateration and total station systems have found limited application. In this paper the present role of the surveying engineer in the burgeoning field of industrial measurement is discussed, and prospects for the future are considered. One question that arises regarding the use of surveying technologies in this new area is whether the services and expertise of the surveyor are being called upon at a rate commensurate with that at which the traditional “tools of his trade” are being applied. Although the paper centers on the scene in the U.S. there is reason to believe that trends there will also be witnessed in other countries of the industrialized world.

APA, Harvard, Vancouver, ISO, and other styles

3

Kerfoot, Henry B., and Cynthia L. Mayer. "The Use of Industrial Hygiene Samplers for Soil-Gas Surveying." Groundwater Monitoring & Remediation 6, no. 4 (December 1986): 74–78. http://dx.doi.org/10.1111/j.1745-6592.1986.tb01036.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Leslie, W. H. P. "Surveying analysis and optimization." Computer-Aided Design 17, no. 4 (May 1985): 201–2. http://dx.doi.org/10.1016/0010-4485(85)90228-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Marchington, Mick. "Surveying the Practice of Joint Consultation in Australia." Journal of Industrial Relations 34, no. 4 (December 1992): 530–49. http://dx.doi.org/10.1177/002218569203400402.

Full text

Abstract:

In the last few years, a number of articles have pointed to the groiving relevance of joint consultation within Australian workplaces, a view which is stipported by the data from the 1990 Australian Workplace Industrial Relations Survey. The purpose of this paper is to extend the brief analysis contained in Industrial Relations at Work, and analyze the role played by joint consultative committees across employing organizations as a whole. In particular, evidence is examined relating to the growth/ decline of consultation, its links with other mechanisms for developing employee involvement, the rationale for its implementation at work, the shape and character of joint consultative committees, as well as the participants' attitudes towards these schemes. There appears to have been an increase in consultation recently, and—contrary to some observers—the committees themselves seem to be well received by those who are involved in them. The analysis also suggests that at least two rather different models of consultation appear to be operating in Australia, largely dependent upon the degree and strength of unionization at the workplace. It is argued that the links between consultation and collective bargaining should be more closely examined if there is a further move towards devolved negotiations in Australia.

APA, Harvard, Vancouver, ISO, and other styles

6

Varga, Pal, Jozsef Peto, Attila Franko, David Balla, David Haja, Ferenc Janky, Gabor Soos, Daniel Ficzere, Markosz Maliosz, and Laszlo Toka. "5G support for Industrial IoT Applications— Challenges, Solutions, and Research gaps." Sensors 20, no. 3 (February 4, 2020): 828. http://dx.doi.org/10.3390/s20030828.

Full text

Abstract:

Industrial IoT has special communication requirements, including high reliability, low latency, flexibility, and security. These are instinctively provided by the 5G mobile technology, making it a successful candidate for supporting Industrial IoT (IIoT) scenarios. The aim of this paper is to identify current research challenges and solutions in relation to 5G-enabled Industrial IoT, based on the initial requirements and promises of both domains. The methodology of the paper follows the steps of surveying state-of-the art, comparing results to identify further challenges, and drawing conclusions as lessons learned for each research domain. These areas include IIoT applications and their requirements; mobile edge cloud; back-end performance tuning; network function virtualization; and security, blockchains for IIoT, Artificial Intelligence support for 5G, and private campus networks. Beside surveying the current challenges and solutions, the paper aims to provide meaningful comparisons for each of these areas (in relation to 5G-enabled IIoT) to draw conclusions on current research gaps.

APA, Harvard, Vancouver, ISO, and other styles

7

Rochmadi, Sunar. "INDUSTRY PARTNERSHIPS LEARNING MODELS FOR SURVEYING AND MAPPING OF VOCATIONAL HIGH SCHOOLS." Jurnal Pendidikan Teknologi dan Kejuruan 23, no. 2 (September 11, 2016): 210. http://dx.doi.org/10.21831/jptk.v23i2.12304.

Full text

Abstract:

This study aims to identify a learning involving the world of work, to formulate the learning model, and to evaluate the learning model. This study used a qualitative approach for design and development research, consisting of the development and validation steps. The study concludes as follows. (1) the learning through partnerships having been conducted in all vocational high schools were industrial practice and vocational practice examination. (2) the constraints of learning through partnerships were mainly the far distance and the industry schedules that did not always match with the school’s. (3) the model development could be done by improving the learning quality by industrial practices in the private companies and with adding the learning model by industry visits, guest teaching, and up-to-date technology training. (4) the implementation of the developed model showed the feasibility and the effectiveness to prepare the students with the competencies required by the world of work. (5) the learning models through partnerships that could be practiced were guest teaching, orientation for industrial practice, industrial practices, students’ industry visits, up-to-date technology training, and vocational practice examination.

APA, Harvard, Vancouver, ISO, and other styles

8

Veöreös, András. "Role of Surveying During Reconditioning of Monuments." YBL Journal of Built Environment 7, no. 2 (January 1, 2019): 22–30. http://dx.doi.org/10.2478/jbe-2019-0008.

Full text

Abstract:

Abstract Ernő Foerk’s most well-known work in architectural circles is certainly the volume published in the reprint edition, which collects the material of the building surveys conducted by the students of the Hungarian Royal Public Higher Architectural Industrial School between 1912-1942. The introduction to each volume shows that he considered to document the buildings as the main task of the surveys - besides their role in education - and thus to serve the Hungarian culture. Architectural surveying is still one of the most important starting points for monument reconditioning. Ideally, the process of monument reconditioning consists of the following steps: Scientific Research - Pre-planning Technical Studies – Compilation of a Planning Program and Planning - Professional Authority Control (getting of building permission) – Building Construction Work and (Fine Art) Restoration - Maintenance. This paper presents the essential role of surveying in this process.

APA, Harvard, Vancouver, ISO, and other styles

9

Gunn, Michael J., and Ronald S. Hicks. "Industrial Photogrammetry—Its Application to Shipbuilding." Marine Technology and SNAME News 25, no. 03 (July 1, 1988): 229–36. http://dx.doi.org/10.5957/mt1.1988.25.3.229.

Full text

Abstract:

Photogrammetry is the science of acquiring and interpreting three-dimensional data of physical objects by measuring and analyzing their images on photographic plates. The development of this technology since the mid-seventies has increased its credibility for application to industrial and shipbuilding use. Analytical photogrammetry is now routinely employed in shipbuilding for tasks as diverse as predicting the fit-up of structural steel assemblies prior to their joining, verifying the circularity of submarine hulls, and checking the alignment of catapult trough components on aircraft carriers. The authors address the practical applications of photogrammetric technology, and identify the reliability, versatility, and productivity of photogrammetric surveying when applied to shipbuilding.

APA, Harvard, Vancouver, ISO, and other styles

10

Quintero, Antonia M. Reina. "Surveying navigation modelling approaches." International Journal of Computer Applications in Technology 33, no. 4 (2008): 327. http://dx.doi.org/10.1504/ijcat.2008.022429.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Thiessen, Lindsey D., Tyler Schappe, Sarah Cochran, Kristin Hicks, and Angela R. Post. "Surveying for Potential Diseases and Abiotic Disorders of Industrial Hemp (Cannabis sativa) Production." Plant Health Progress 21, no. 4 (January 1, 2020): 321–32. http://dx.doi.org/10.1094/php-03-20-0017-rs.

Full text

Abstract:

Industrial hemp (Cannabis sativa L.) has recently been reintroduced as an agricultural commodity in the United States, and, through state-led pilot programs, growers and researchers have been investigating production strategies. Diseases and disorders of industrial hemp in the United States are largely unknowns because record-keeping and taxonomy have improved dramatically in the last several decades. In 2016, North Carolina launched a pilot program to investigate industrial hemp, and diseases and abiotic disorders were surveyed in 2017 and 2018. Producers, consultants, and agricultural extension agents submitted samples to the North Carolina Department of Agriculture and Consumer Services Agronomic Services Division (n = 572) and the North Carolina Plant Disease and Insect Clinic (n = 117). Common field diseases found included Fusarium foliar and flower blights (Fusarium graminearum), Fusarium wilt (Fusarium oxysporum), and Helminthosporium leaf spot (Exserohilum rostratum). Greenhouse diseases were primarily caused by Pythium spp. and Botrytis cinerea. Common environmental disorders were attributed to excessive rainfall flooding roots and poor root development of transplanted clones.

APA, Harvard, Vancouver, ISO, and other styles

12

Hughes, Karen D., and Graham S. Lowe. "Surveying the “Post-Industrial” Landscape: Information Technologies and Labour Market Polarization in Canada*." Canadian Review of Sociology/Revue canadienne de sociologie 37, no. 1 (July 14, 2008): 29–53. http://dx.doi.org/10.1111/j.1755-618x.2000.tb00585.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Litynskyi, Volodymyr, Svyatoslav Litynskyi, Anatolii Vivat, Mykhailo Fys, and Andrii Brydun. "The accuracy investigation of point coordinates’ determination using a fixed basis for high-precision geodesy binding." Reports on Geodesy and Geoinformatics 107, no. 1 (May 11, 2019): 19–23. http://dx.doi.org/10.2478/rgg-2019-0003.

Full text

Abstract:

AbstractModern scanners can perform terrestrial topographic survey with resolution of 1 cm and accuracy of 2 mm in just a few minute‘s time, from the distance of up to 100 meters. However, for surface topographical surveying of large territories or complex industrial objects, it is necessary to conduct geodetic traverses and perform their binding to the points of the geodesic basis. One method of coordinate transferring during surveying is by using the method of inverse linear-angular intersection, which involves the measuring of the respective sides S1, S2 and the β angle between them. This method is more precise than the classical one, which usually contains centring and reduction errors. The linear-angular intersection method can also be used for many applications in engineering geodesy, for laying geodetic traverses, and for binding to the wall based points of ground-surveying.

APA, Harvard, Vancouver, ISO, and other styles

14

Schwarz, K. P., E. H. Knickmeyer, and H. Martell. "The use of strapdown technology in surveying." CISM journal 44, no. 1 (April 1990): 29–37. http://dx.doi.org/10.1139/geomat-1990-0003.

Full text

Abstract:

Inertial technology has been successfully used in surveying and geodesy for more than a decade. Although results in positioning and gravity vector determination have been excellent, the high cost of the stable platform systems, their bulkiness and their susceptibility to down times in a rough production environment, have somewhat limited the use of this new technology. In addition, a number of interesting applications could not be attempted because raw accelerations and angular velocities at a high data rate were not available. The Department of Surveying Engineering at the University of Calgary has therefore studied the use of strapdown technology for surveying applications and the paper summarizes results achieved during the last two years. They show that strapdown technology offers an economic, versatile and reliable way to solve surveying problems in a number of areas where platform systems could not be used or were not competitive. Four developments will be specifically highlighted. The testing of a Strap-down Inertial Survey System (SISS), the development of an inertial pipeline monitoring system, the testing of an integrated INS/GPS for airborne photogrammetry and line imaging, and studies leading to the development of an inertial system for industrial alignment surveys. In each case, the concept of the specific application will be outlined and a brief discussion of the results achieved to date will be given.

APA, Harvard, Vancouver, ISO, and other styles

15

Stenz, Ulrich, Jens Hartmann, Jens-André Paffenholz, and Ingo Neumann. "High-Precision 3D Object Capturing with Static and Kinematic Terrestrial Laser Scanning in Industrial Applications—Approaches of Quality Assessment." Remote Sensing 12, no. 2 (January 15, 2020): 290. http://dx.doi.org/10.3390/rs12020290.

Full text

Abstract:

Terrestrial laser scanning is used in many disciplines of engineering. Examples include mobile mapping, architecture surveying, archaeology, as well as monitoring and surveillance measurements. For most of the mentioned applications, 3D object capturing in an accuracy range of several millimeters up to a few centimeters is sufficient. However, in engineering geodesy, particularly in industrial surveying or monitoring measurements, accuracies in a range of a few millimeters are required. Additional increased quality requirements apply to these applications. This paper focuses on the quality investigation of data captured with static and kinematic terrestrial laser scanning. For this purpose, suitable sensors, which are typically used in the approach of a multi-sensor-system, as well as the corresponding data capturing/acquisition strategies, are presented. The aim of such systems is a geometry- and surface-based analysis in an industrial environment with an accuracy of +/− 1–2 mm or better.

APA, Harvard, Vancouver, ISO, and other styles

16

Karpik, A. P., and D. V. Lisitsky. "Surveying industry: prospective development directions in the post-industrial era and the digital economy." Geodesy and Cartography 946, no. 4 (May 20, 2019): 55–64. http://dx.doi.org/10.22389/0016-7126-2019-946-4-55-64.

Full text

Abstract:

New conditions, technological capabilities and development prospects of the geodetic industry in recent time are characterized. The directions and strategy of the developing the industry, aimed at increasing its national importance by expanding the field of activity from the level of geoinformation to the level of its widespread use are substantiated. The solutions and tasks for the transfer of geo-information activities to a digital basis are listed. The definition of the geospatial activity’s concept is given. The conceptual structure and essentially new directions of geospatial support development of territories taking into account the perspective are offered. They are creating a single territorial geo-information space, designing and developing geo-cognitive technologies for forming geospatial knowledge, developing geo-cognitive technologies for preparing geo-spatial solutions to ensure territorial development and management. The technological levels of formalization and use of geospatial knowledge at preparing spatial solutions are considered. The forecast of expected efficiency received from geospatial activity in the digital economy is given. The scientific and technical directions for the successful geospatial supporting the spatial development of the country and solving tasks of transition to the digital economy are listed.

APA, Harvard, Vancouver, ISO, and other styles

17

Wenhao, Feng. "Methods for setting up a three-dimensional industrial surveying system of “building blocks type”." Geo-spatial Information Science 7, no. 3 (January 2004): 157–61. http://dx.doi.org/10.1007/bf02826284.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Castro-Garcia, M., A. M. Perez-Romero, M. J. Leon-Bonillo, and F. Manzano-Agugliaro. "Developing Topographic Surveying Software to Train Civil Engineers." Journal of Professional Issues in Engineering Education and Practice 143, no. 1 (January 2017): 04016013. http://dx.doi.org/10.1061/(asce)ei.1943-5541.0000294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Lim, Chai-Chai, Tien-Choon Toh, Yoke-Lian Lew, Chin-Xian Lau, Kai-Chen Goh, Md Asrul Nasid Masrom, Nadzirah Zainordin, and Siaw-Chuing Loo. "THE PERSPECTIVE OF STUDENTS ON DRIVERS AND BENEFITS OF BUILDING INFORMATION MODELLING INCORPORATION INTO QUANTITY SURVEYING PROFESSION IN KLANG VALLEY MALAYSIA." International Journal of Industrial Management 7 (September 1, 2020): 16–29. http://dx.doi.org/10.15282/ijim.7.0.2020.5751.

Full text

Abstract:

Building Information Modelling (BIM) is a very useful tool that facilitates architecture, engineering and construction (AEC) professionals and stakeholders in planning, designing and constructing the buildings through 3D models. BIM can be widened to building operations and data storage which can be accessible by owners and others. Such data help owners and stakeholders to generate results according to the information gained through BIM models. The objectives of this study were to identify the perspective of students on drivers of BIM incorporation into the quantity surveying profession and to identify the perspective of students on benefits of BIM incorporation into the quantity surveying profession. A questionnaire survey was carried out to gain the students’ perspective on drivers and benefits of BIM incorporation into the quantity surveying profession in Klang Valley, Malaysia. Specifically, this study investigated twelve drivers and fourteen benefits of BIM incorporation into the quantity surveying profession. The top three drivers were improving the capacity to provide whole-life value to the client, desire for innovation to remain competitive and strong support from university management and industry. The top three benefits were BIM provides fast, effective and efficient quantity take-off and cost estimation, time savings in the preparation of estimating cost and improved visualization for better understanding of designs for measurement and minimise omissions. For future research, it is recommended that the study be replicated at other regions so that a clearer view of this topic can be obtained. Besides, qualitative research methods could be used in identifying other drivers and benefits not covered in this study. By answering the questions in the survey form, the students were able to gain some knowledge on BIM and its importance to the quantity surveying profession. Also, it would be interesting to include industrial practitioners in this kind of study, allowing comparisons of the results between academia and industry at a later stage. Nonetheless, this study benefited the undergraduate students pursuing the Bachelor of Science (Hons) Quantity Surveying programme, universities, colleges and other institutions that offered the quantity surveying programmes at various levels and quantity surveyors working in the construction industry by exposing them to a comprehensive list of drivers and benefits of BIM incorporation into quantity surveying profession. In a way, this study helped promoted BIM and its implementation in the field of quantity surveying in Klang Valley, Malaysia.

APA, Harvard, Vancouver, ISO, and other styles

20

Petrie, G., and T. J. M. Kennie. "Terrain modelling in surveying and civil engineering." Computer-Aided Design 19, no. 4 (May 1987): 171–87. http://dx.doi.org/10.1016/0010-4485(87)90066-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Li, Rui, and Jin Ping Wang. "Analysis of Lianghu Local-Style Dwellings Detail Structure." Advanced Materials Research 663 (February 2013): 235–37. http://dx.doi.org/10.4028/www.scientific.net/amr.663.235.

Full text

Abstract:

Lianghu dwellings arcitechture detail structure is well-preserved. In this paper, we enumerate and analysis it, which reflect that the construction technology of traditional dwellings is elaborate and mature. Through the field surveying and mapping research, we realize the historical, cultural and artistical value of it, which has great inspiration effect to artistical design and industrial technology today.

APA, Harvard, Vancouver, ISO, and other styles

22

Dayal, K. R., and I. M. Chauhan. "UAV PHOTOGRAMMETRY FOR FEATURE EXTRACTION AND MAPPING OF CORRUGATED INDUSTRIAL ROOFTOPS." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-4 (September 19, 2018): 129–33. http://dx.doi.org/10.5194/isprs-archives-xlii-4-129-2018.

Full text

Abstract:

Abstract. Corrugated roof sheets used for large-scale industrial rooftops have the potential to carry solar panels. The sheets, however, need to be surveyed so that the solar panels can be installed according to the measurements of various features. For this purpose, information about exhausts, skylights, corrugation spacing, including extraction of roof slope, which is essential for planning solar panel installations, needs to be measured and mapped. UAV surveying, in contrast to traditional surveying and manual measurements, has proven to be of great benefit in the recent years due to its mobility and low-cost operations and with photogrammetric processing, 3D information with sufficient details can be obtained. In this study, we explored the use of UAV platforms for extraction of fine features (corrugations) of industrial rooftops. The point cloud obtained after photogrammetric processing contained significant geometric information about the corrugation, along with noise. The point cloud was processed to remove noise. Smoothing and exaggeration in the Z-direction, without altering X and Y coordinates, ensured a smooth profile with pronounced peaks at the location of corrugations. Cross-sectional profiles were extracted as a vector and peaks in the profile indicated presence of the corrugation. A peak identification algorithm was used to extract local maxima with corresponding distances along the profile. The peak points were plotted on the ortho-image, and the mean distance between subsequent peaks was approximately 20.3cm with a standard deviation of 1&ndash;2cm. The spacing between the corrugations was approximately 20cm when measured manually.

APA, Harvard, Vancouver, ISO, and other styles

23

Olatunji, Samuel O., Timothy O. Olawumi, and Isaac O. Aje. "Rethinking Partnering among Quantity-Surveying Firms in Nigeria." Journal of Construction Engineering and Management 143, no. 11 (November 2017): 05017018. http://dx.doi.org/10.1061/(asce)co.1943-7862.0001394.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Piras, M., V. Di Pietra, and D. Visintini. "3D MODELING OF INDUSTRIAL HERITAGE BUILDING USING COTSs SYSTEM: TEST, LIMITS AND PERFORMANCES." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-2/W6 (August 24, 2017): 281–88. http://dx.doi.org/10.5194/isprs-archives-xlii-2-w6-281-2017.

Full text

Abstract:

The role of UAV systems in applied geomatics is continuously increasing in several applications as inspection, surveying and geospatial data. This evolution is mainly due to two factors: new technologies and new algorithms for data processing. About technologies, from some years ago there is a very wide use of commercial UAV even COTSs (Commercial On-The-Shelf) systems. Moreover, these UAVs allow to easily acquire oblique images, giving the possibility to overcome the limitations of the nadir approach related to the field of view and occlusions. In order to test potential and issue of COTSs systems, the Italian Society of Photogrammetry and Topography (SIFET) has organised the SBM2017, which is a benchmark where all people can participate in a shared experience. This benchmark, called “Photogrammetry with oblique images from UAV: potentialities and challenges”, permits to collect considerations from the users, highlight the potential of these systems, define the critical aspects and the technological challenges and compare distinct approaches and software. The case study is the “Fornace Penna” in Scicli (Ragusa, Italy), an inaccessible monument of industrial architecture from the early 1900s. The datasets (images and video) have been acquired from three different UAVs system: Parrot Bebop 2, DJI Phantom 4 and Flytop Flynovex. The aim of this benchmark is to generate the 3D model of the “Fornace Penna”, making an analysis considering different software, imaging geometry and processing strategies. This paper describes the surveying strategies, the methodologies and five different photogrammetric obtained results (sensor calibration, external orientation, dense point cloud and two orthophotos), using separately &ndash; the single images and the frames extracted from the video &ndash; acquired with the DJI system.

APA, Harvard, Vancouver, ISO, and other styles

25

Bazhan, S., and A. Hosseininaveh. "A MOVING OBSTACLES PLANNER ALGORITHM FOR A SIX-WHEELED SURVEYING ROBOT." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-4/W18 (October 18, 2019): 191–95. http://dx.doi.org/10.5194/isprs-archives-xlii-4-w18-191-2019.

Full text

Abstract:

Abstract. Nowadays, robotic systems such as ground vehicle robots are mostly used in many industrial and military applications. Therefore, the path planning problem in the robotics domain is very important. Moving Obstacles Planner (MOP) algorithms have got the researchers interests in recent years and some of the most recent ones have been implemented in Robot Operating System (ROS) which is an open source middle wear to work with robots. This paper aims to compare the state-of-the-art MOP algorithms including Rapidly exploring Random Tree (RRT) and those implemented in the ROS navigation stack such as Dynamic Window Approach (DWA) local planner coupled with Dijkstra and A* as global planners on a six-wheeled robot known as MOOR in simulation environment. The results reveal that all of these algorithms have been designed for a square shape footprint robot and thus have limitations for MOOR with a rectangular footprint shape.

APA, Harvard, Vancouver, ISO, and other styles

26

Llale, Josephine, David Root, and Paulin Wembe. "Opportunities and Threats of the Fourth Industrial Revolution on the Quantity Surveying Profession in South Africa." International Journal of Technology, Knowledge, and Society 16, no. 2 (2020): 35–45. http://dx.doi.org/10.18848/1832-3669/cgp/v16i02/35-45.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Li, Chen-Min, I. Cheng Yeh, Shin-Feng Chen, Tusang-Yuan Chiang, and Li-Chuan Lien. "Virtual Reality Learning System for Digital Terrain Model Surveying Practice." Journal of Professional Issues in Engineering Education and Practice 134, no. 4 (October 2008): 335–45. http://dx.doi.org/10.1061/(asce)1052-3928(2008)134:4(335).

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Masum, Fahria, Reinfried Mansberger, Audrey Martin, Gerhard Navratil, and Anthony Mushinge. "Adapting the Surveying Curriculum to New Dimensions of the Profession." Journal of Professional Issues in Engineering Education and Practice 145, no. 2 (April 2019): 04019003. http://dx.doi.org/10.1061/(asce)ei.1943-5541.0000408.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

John, George, and Barton Weitz. "Salesforce Compensation: An Empirical Investigation of Factors Related to Use of Salary versus Incentive Compensation." Journal of Marketing Research 26, no. 1 (February 1989): 1–14. http://dx.doi.org/10.1177/002224378902600101.

Full text

Abstract:

The transaction cost analysis framework is integrated with prescriptions from the sales management literature to develop a model that indicates the role of salary in a sales compensation plan for industrial firms. The descriptive power of the model is examined by surveying compensation practices in 161 firms. The results indicate that the transaction cost framework is somewhat useful in describing the use of salary, but the framework does not consider some important aspects guiding salary versus incentive compensation decisions.

APA, Harvard, Vancouver, ISO, and other styles

30

Andrade, María, and Iria Caamaño-Franco. "Theoretical and Methodological Model for the Study of Social Perception of the Impact of Industrial Tourism on Local Development." Social Sciences 7, no. 11 (October 31, 2018): 217. http://dx.doi.org/10.3390/socsci7110217.

Full text

Abstract:

Tourism is considered to be an engine for socioeconomic development and a tool to alleviate the problems of different regions and, specifically, of industrial zones. Furthermore, from this standpoint, industrial tourism tries to harness any potential cultural interest that visitors may have in industrial heritage. Using this as a starting point, the general objective of this research is to analyse industrial tourism’s contribution to local development in four case studies that form part of the industrial tourism in Spain and Portugal. For this purpose, a quantitative methodology has been proposed and designed through surveying the local population, the results of which show that the tourism type analysed has positive impacts on each of the local development capitals or dimensions (symbolic, heritage, social, human, economic and infrastructure). Likewise, it has also been discovered that the impacts perceived by the local population are related to the intrinsic characteristics of the territory itself, due to the destination’s degree of tourist development, as well as to the attitudes shown by the local population towards industrial tourism, among other factors.

APA, Harvard, Vancouver, ISO, and other styles

31

Tsoy, Tatyana, Leysan Sabirova, and Evgeni Magid. "Effective Robotics Education: Surveying Experiences of Master Program Students in Introduction to Robotics Course." MATEC Web of Conferences 220 (2018): 06005. http://dx.doi.org/10.1051/matecconf/201822006005.

Full text

Abstract:

Technology-driven world poses new challenges for the modern education system. To prepare skilled specialists for academic and industrial needs it is important to create competitive educational ground. Our team works on developing and implementing world-class master program in Intelligent Robotics. To pave the way for a high-quality educational program we invest efforts into studying students’ attitude and motivation for connecting their professional life with robotics. In this paper we describe the curriculum for master program that was designed and implemented at the Higher Institute of Information Technology and Information Systems at Kazan Federal University and present the results of our continuous research of comparative analysis of surveys among students of Introduction to Robotics course.

APA, Harvard, Vancouver, ISO, and other styles

32

Ward, Stephen L., Thomas T. Allen, Raymond D. Chavers, Thomas N. Robertson, and Philip K. Schultz. "Diagnosing Production Problems With Downhole Video Surveying At Prudhoe Bay." Journal of Petroleum Technology 46, no. 11 (November 1, 1994): 973–78. http://dx.doi.org/10.2118/26043-pa.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Fellows, Richard, Anita Liu, and Cheung Miu Fong. "Leadership style and power relations in quantity surveying in Hong Kong." Construction Management and Economics 21, no. 8 (December 2003): 809–18. http://dx.doi.org/10.1080/0144619032000174521.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Abdul‐Aziz, Abdul‐Rashid, David Pengiran Ngau, Yoke Mui Lim, and Azlan Raofuddin Nuruddin. "Internationalization of Malaysian quantity surveying firms: exploring the best fit models." Construction Management and Economics 29, no. 1 (January 2011): 49–58. http://dx.doi.org/10.1080/01446193.2010.519782.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Braun, Jaroslav, Filip Dvořáček, and Martin Štroner. "Absolute Baseline for Testing of Electronic Distance Meters." Geoinformatics FCE CTU 12 (June 3, 2014): 28–33. http://dx.doi.org/10.14311/gi.12.5.

Full text

Abstract:

The paper deals with the construction and determination of coordinates of the absoluteEDMs baseline in a laboratory with 16 pillars with forced centring. Leica Absolute TrackerAT401 (standard deviation of distance measurement: 5 μ m, standard deviation of anglemeasurement: 0.15 mgon), which is designed for very accurate industrial measurements,was used for our purpose. Lengths between the baseline points were determined with astandard deviation of 0.02 mm. The baseline is used for determining systematic and randomerrors of distance meters and for accuracy of distance meters at short distances commonin engineering surveying for purposes of mechanical engineering.

APA, Harvard, Vancouver, ISO, and other styles

36

Rukayah, R. Siti, Ardiyan Adhi Wibowo, and Sri Hartuti Wahyuningrum. "City Branding in Pekalongan, Central Java." Asian Journal of Behavioural Studies 1, no. 3 (September 1, 2016): 13. http://dx.doi.org/10.21834/ajbes.v1i3.34.

Full text

Abstract:

There are many cities in Indonesia categorized as batik-industrial cities. Postal road that connects cities along the northern coast of Java Island passes right through Pekalongan. Through historical and naturalistic approach, this road is the promotional media for local citizens to display their industrial products, making it a shopping window. The image of Pekalongan as an industrial city is obtained naturally from the participation of its people. Pekalongan is globally professional city that has sustained its image since 1800s. The continuation of the research is to compare Pekalongan to another city that has successfully implemented the concept and become an advanced industrial city.2398-4295 © 2016. The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK.. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.Keywords: Pekalongan; Batik; image; city

APA, Harvard, Vancouver, ISO, and other styles

37

Anopin, V. N., T. A. Sabitova, and S. A. Kalinovsky. "Performance of surveying to assess man-made risks in operation of industrial facilities by example of Volgograd agglomeration." IOP Conference Series: Materials Science and Engineering 687 (December 10, 2019): 066003. http://dx.doi.org/10.1088/1757-899x/687/6/066003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Lam, Steve Y. "Teaching Engineering Surveying in a Civil Engineering Program: Curriculum, Pedagogy, and Assessment." Journal of Professional Issues in Engineering Education and Practice 134, no. 2 (April 2008): 173–77. http://dx.doi.org/10.1061/(asce)1052-3928(2008)134:2(173).

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Egercioglu, Yakup, and Caglayan Deniz Kaplan. "Revitalization of Ottoman Industrial Heritage in Kemeraltı and Izmir History Project." Environment-Behaviour Proceedings Journal 1, no. 4 (August 8, 2016): 119. http://dx.doi.org/10.21834/e-bpj.v1i4.377.

Full text

Abstract:

In this study, conservation and renovation proposals for Hamdi Dalan Soap Factory, where industrial production was carried out at various times especially after the Industrial Revolution, have been developed within the scope of integrating it with its built environment, settlement identity and public/social life. The building is located in Izmir Historical Kemeraltı zone and due to the technological developments of the later period and production oriented economic policies, has lost its function and has been abandoned. This paper aims to discuss a process of participation, implemented and intended works whose pros and cons will be determined. To achieve this, Izmir Metropolitan Municipality has carried out a multidisciplinary "Izmir History Project".© 2016. The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.Keywords: Revitalization; Izmir History Project; Hamdi Dalan Soap Factory; TARKEM

APA, Harvard, Vancouver, ISO, and other styles

40

Nastiti, Anindrya, Indrawan Prabaharyaka, Dwina Roosmini, and Tresna Dermawan Kunaefi. "Pre-Assessment: Health-Associated Cost of Urban Informal Industrial Sector." Journal of ASIAN Behavioural Studies 2, no. 4 (July 1, 2017): 71. http://dx.doi.org/10.21834/jabs.v2i4.208.

Full text

Abstract:

Marginalised urban migrants thrive in informal economies, where health and safety are often neglected. Findings on previous studies have listed several informal characteristics; occupational injuries and diseases in informal setting; and components of health expenditure. This paper attempts to assess the health-associated cost in an informal industry through a questionnaire containing basic information of the respondent and household members, as well as economic and occupational assessments. The challenges that must be addressed include the different types of jobs surveyed, target population, biases from occupational/non-occupational cost and household/individual expenditure, and the validation method. This paper serves as a policy-tool reference to improve the well-being of informal workers by improving the nationwide workforce survey. Keywords: informal sector; health expenditure eISSN 2514-7528 © 2017 The Authors. Published for AMER ABRA by e-International Publishing House, Ltd., UK . This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.

APA, Harvard, Vancouver, ISO, and other styles

41

Cornick, Tim, and Kevin Osbon. "A study of the contractor's quantity surveying practice during the construction process." Construction Management and Economics 12, no. 2 (March 1994): 107–11. http://dx.doi.org/10.1080/01446199400000017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Song, Qiu Hong. "Key Technologies of the Embedded Deformation Measuring Control System Based on SOPC." Applied Mechanics and Materials 644-650 (September 2014): 773–76. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.773.

Full text

Abstract:

Deformation measurement is an important content of engineering surveying and the main objects of the deformation measurement are civilians, industrial buildings, precision engineering, large dam, bridge and the earth's crust deformation of rock mass. Deformation measurement aims to obtain the deformation data in the process of displacement deformation, and to get the deformation of the status, trend and possible results through the analysis of these data. The existing automatable solution for measuring the deformation all adopt the 3-dimension displacement test, which based on high precision total station, unattended, automatic data acquisition and transmission control mode.

APA, Harvard, Vancouver, ISO, and other styles

43

Mozas-Calvache, Antonio T., and Francisca Barba-Colmenero. "System for Evaluating Groups When Applying Project-Based Learning to Surveying Engineering Education." Journal of Professional Issues in Engineering Education and Practice 139, no. 4 (October 2013): 317–24. http://dx.doi.org/10.1061/(asce)ei.1943-5541.0000160.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Manu, Patrick, Kofi Agyekum, Abdul-Majeed Mahamadu, Paul Olomolaiye, and Emmanuel Adinyira. "Differences in Stakeholder Ability in Addressing Unethical Practices: Insights from the Surveying Profession." Journal of Professional Issues in Engineering Education and Practice 145, no. 4 (October 2019): 04019011. http://dx.doi.org/10.1061/(asce)ei.1943-5541.0000426.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Zelensky, A. "USE OF B-SPLINES IN DEVELOPMENT OF AUTOMATED GEOLOGICAL-SURVEYING SUPPORTSYSTEM." Visnyk of Taras Shevchenko National University of Kyiv. Geology, no. 3 (86) (2019): 48–54. http://dx.doi.org/10.17721/1728-2713.86.07.

Full text

Abstract:

Purpose. The effectiveness of the development of an information system for quarry management is primarily determined by the level of geological and surveying support (GSS), which includes solving such basic tasks as calculating reserves (operational and complete), accounting for ore mining, building the information base for mining planning and management, and field modeling, and career, ore body contouring, etc. The purpose of this work is to develop and use B-Splines in the automation of geological surveying software in the quarry. Research methods. The basis of many tasks is the construction of surfaces. For the first time in recent years, an uneven rational Bspline (NURBS) is used to describe them, which most fully satisfies the following criteria: the model's adequacy to the real representation, the efficiency of model formation and surface construction, and the visualization of the model in three-dimensional space. Scientific novelty. The advantages of constructing surfaces using NURBS are as follows: ease of calculation; sufficient smoothness; construction of the surface of any degree of complexity; using the weights of the control points, control of the surface (it can pass strictly through the specified control points). The latter property made it possible with the help of a NURBS surface to effectively model the day surface of a quarry with a strict passage of the surface through points of the ledges. Practical significance. For the joint Russian-Mongolian enterprise Erdenet (Mongolia), developing the copper-molybdenum deposit, an integrated automated GSS system has been developed and has been in operation for many years. Software and algorithmic tasks of the system are constantly being improved. This article presents its latest developments and development paths. The use of NURBS allowed us to construct the day surface of the open-pit mine, to improve the complete calculation of reserves, the accounting of ore mining, and the delineation of ore bodies along the open-pit horizons. Results. The software is implemented in C++ and C# for Windows. To build three-dimensional graphics, the tools of the open graphic library OpenGL are used. Separate modules of the developed GSS system were used at the Novokrivoyorogsk and Ingulets mining and processing plants. The methodology for constructing automated GSSs has been approved by many years of positive experience in industrial implementation and can be used for non-ferrous ore and iron ore deposits.

APA, Harvard, Vancouver, ISO, and other styles

46

Altyntsev, Maxim, and Marina Altyntseva. "Generating topographic plans of oil and gas industry depending on a surveying method." InterCarto. InterGIS 26, no. 1 (2020): 447–83. http://dx.doi.org/10.35595/2414-9179-2020-1-26-447-463.

Full text

Abstract:

The territories of oil and gas deposits are represented with complicated and diverse industrial objects. During their operation and building of new constructions it is necessary to conduct topographic survey. Various methods are used for this purpose. The selection of these methods is determined by the degree of area build-up, its size and scale of the topographic plan being created. Aerial methods of topographic surveys are relevant when mapping large territories. Terrestrial methods are used more often when surveying oil and gas objects. Among terrestrial methods classically are accepted tacheometrical survey and GNNS measurements. Terrestrial and mobile laser scanning currently gained great popularity. Introduction of laser scanning methods allowed users to significantly speed up field works keeping high accuracy of obtained data. The advantages of laser scanning application comparing to classical methods when surveying oil and gas deposits are described. It is discussed what cases of classical method application can be more preferable. To cover all the bases the description is provided on the basis of 3 deposit parts, which are different in the degree of area build-up and have different requirements for topographic plan creation as follows: scale, need to input semantic information, a format of representing the result. Introduction of new survey methods requires developing appropriate data processing techniques. As a rule, each new survey territory has its own features which should be taken into account when developing new techniques. The techniques for creating topographic plans using terrestrial laser scanning, mobile one and GNNS measurements are described.

APA, Harvard, Vancouver, ISO, and other styles

47

Marmaya, Ezyana Anyzah, and Rohana Mahbub. "Evaluation of Environmental Impact and Risk Assessment Methods of Industrial Buildings in Malaysia." Asian Journal of Quality of Life 3, no. 13 (August 25, 2018): 39–47. http://dx.doi.org/10.21834/ajqol.v3i13.160.

Full text

Abstract:

To ensure high performance of projects, risk factors and their impact towards the environment need to be addressed during and after the construction phase. This research aims to assess the risk factors and the impact of industrial projects to the environment and surrounding areas. The research employs multi-method strategies: this case study of SAMUR, Sabah includes several interviews, observations, analysis of project documents and questionnaires distributed among the occupants living in the surrounding area. The results of the research indicated that the project is perceived to have negative environmental impact measured under ecosystem, natural resources, and public impact.Keywords: risk assessment, risk factors, environmental impact, industrial projects, Malaysia.eISSN 2398-4279 © 2018. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia. DOI: https://doi.org/10.21834/ajqol.v3i13.160

APA, Harvard, Vancouver, ISO, and other styles

48

MATOS, Érica Santos, Alyne Raminelli Siguel Gemin, and Pedro Luis Faggion. "MODEL FOR DETERMINATION OF THREE-DIMENSIONAL COORDINATES OF HIDDEN POINTS." Boletim de Ciências Geodésicas 23, no. 1 (March 2017): 182–95. http://dx.doi.org/10.1590/s1982-21702017000100012.

Full text

Abstract:

One of the problems encountered during surveys is obstruction of points to be monitored, an example of this can be found in industrial environments where there are usually pipes and equipment that do not allow the establishment of straight lines;. An alternative to the application of topographic survey techniques is the use of plane mirrors to diversion of straight lines where the points of interest are observed indirectly. This study presents a new approach to the problem, whose analytical solution is based on the principles of Geometrical Optics and Surveying. The relative positional accuracy achieved in the preliminary tests is submillimetric order, and the absolute positional accuracy is millimetric order.

APA, Harvard, Vancouver, ISO, and other styles

49

Ding, Haimeng, Kuang-Peng Hung, Norman Peng, and Annie Chen. "Experiential Value of Exhibition in the Cultural and Creative Park: Antecedents and Effects on CCP Experiential Value and Behavior Intentions." Sustainability 13, no. 13 (June 24, 2021): 7100. http://dx.doi.org/10.3390/su13137100.

Full text

Abstract:

The protection of industrial cultural heritage is related to sustainable urban development. Cultural and creative parks (CCPs) are a way for many cities to protect their industrial cultural heritage. In the context of CCPs, this study examines the relationships among the antecedents of exhibition experiential value, CCP experiential value, and behavioral intentions. Surveying 428 visitors in two well-known CCPs in Taipei, this study found that the four antecedents (attractiveness, existential authenticity, self-congruence, and exhibition–park image congruence) have a positive impact on exhibition experiential value. Exhibition experiential value has a positive impact on CCP experiential value, which in turn, affects behavioral intentions toward the CCP. In addition, this study finds that exhibition experiential value has a mediating effect between the four antecedents and CCP experiential value. Moreover, CCP experiential value has a mediating effect between exhibition experiential value and behavioral intentions. The findings of this study provide a direction for CCPs to achieve sustainable development through exhibitions that can attract more tourists.

APA, Harvard, Vancouver, ISO, and other styles

50

Wang, De Bao, Jun Feng Qu, Xue Ling Fang, and Mei Lan Yu. "Key Technology Discussion on Surveying and Mapping 1:1000 Photogrammetric Digital Topographic Map of Laicheng Industrial Zone in Laiwu City." Advanced Materials Research 846-847 (November 2013): 1166–70. http://dx.doi.org/10.4028/www.scientific.net/amr.846-847.1166.

Full text

Abstract:

Taking use of VirtuoZos digital photogrametric workstations of Supresoft Inc., employing full digital aerophotogrammetric mapping method, according to existing aerial photographic image database, at the foundation of basic control survey, we carry out aerial photographic control survey, surveying and mapping with pile point method, digital aerotriangulation and full digital stereocompilation. When taking 1:1000 topographic map obtained by indoor edition to field work for compration, supplement and regulation, we mainly aim at the following purposes: determining the nature and quantity as well as filling vacancy for ground and land features obtained by indoor stereocompilation; positioning for habitation, wall and railing, incompletely surveyed, drop shadow-covered and trees-obstructed ground features, as well as newly-added planimetric features after aerial photogrammetry; especially measuring the solid width of a house to centimeter and making eaves correction after measuring the length of a house when needed; correcting the geomatric positioning relationand of ground features according to their solid shape and fairly drawing them in the map; afterwards, we carry out graphic edition again during indoor work. Only in this way can we guarantee the horizontal and vertical accuracy of large scale photogrammetric mapping.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Industrial surveying'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles