Dissertations / Theses on the topic 'Information on the packaging of food'

Los empaques ecológicos adquieren mayor relevancia para los consumidores preocupados por el impacto de sus compras en el medio ambiente, lo cual representa una oportunidad para incrementar las ganancias en un negocio enfocado en productos sostenibles. Por ello, el propósito de este trabajo es investigar la relación entre el empaque ecológico -medido por el diseño, la información y el material usado- y la intención de compra de galletas saludables.  En el diseño del empaque ecológico las piezas clave son el color, la forma y la imagen, debido a que son consideradas cruciales para identificar un empaque ecológico en el punto de venta. Con respecto a la información del empaque ecológico, se considera a la etiqueta el instrumento principal al momento de identificar la sostenibilidad del producto. Por otro lado, el material usado del empaque ecológico toma relevancia para el consumidor cuando éste tiene preferencias hacia un producto sostenible. Existe un vacío en las investigaciones sobre los empaques ecológicos, debido a que no se han realizado estudios para conocer la relación de la intención de compra de las galletas saludables en empaques ecológicos, sino de manera general en productos comestibles, por lo que este estudio contribuirá en ese sentido.
Ecological packaging becomes more relevant for consumers concerned about the impact of their purchases on the environment, which represents an opportunity to increase profits in a business focused on sustainable products. Therefore, the purpose of this work is to investigate the relationship between ecological packaging -measured by design, information and the material used- and the intention of buying healthy cookies. In the design of the ecological packaging, the key pieces are color, shape and image, because they are considered crucial to identify an ecological packaging at the point of sale. Regarding the ecological packaging information, the label is considered the main instrument when identifying the sustainability of the product. On the other hand, the used material of the ecological packaging becomes relevant for the consumer when he has preferences towards a sustainable product. There is a gap in research on organic packaging, since studies have not been conducted to determine the relationship of the intention to buy healthy cookies in ecological packaging, but generally in edible products, so this study will contribute in that sense.
Trabajo de investigación

En esta investigación se encontró un problema de comunicación visual en el restaurante Ache, donde se identificó la falta de elementos gráficos que logre identificar al restaurante de cocina nikkei a partir de su dimensión cultural. Se identificó que este problema de comunicación visual solo se podía resolver mediante el diseño gráfico, ya que pertenece precisamente al área identitaria. Además, este proyecto muestra una justificación cultural y práctica donde se identificarán aspectos esenciales para el replanteamiento de la identidad del restaurante para que logre transmitir su esencia como marca al consumidor.También, se realizó una encuesta a un grupo de personas que consumen comida nikkei y se entrevistó a dos expertos que han creado y rediseñado proyectos de identidad visual de restaurantes nikkeis y otros rubros de comida. Adicionalmente, se utilizó la metodología de trabajo del doble diamante para realizar el proceso de elaboración de la gráfica visual.Los principales resultados que se pudo obtener mediante la propuesta de diseño fueron positivos, ya que los usuarios consideraron que la nueva gráfica sí reflejaba el rubro de comida que ofrecían. Igualmente, el logo lo relacionaban con la cultura nikkei, la carta lo consideraban claro y directo, las imágenes ayudaban a entender el producto a consumir y el empaque les parecía innovador y diferente generando una experiencia única.
In this research, a visual communication problem was found in the Ache restaurant, where the lack of graphic elements that could identify the Nikkei cuisine restaurant from its cultural dimension was identified. It was identified that this visual communication problem could only be solved through graphic design, since it belongs precisely to the identity area. In addition, this project shows a cultural and practical justification where essential aspects will be identified for the rethinking of the identity of the restaurant so that it can transmit its essence as a brand to the consumer.Also, a survey was made to a group of people who consume Nikkei food and two experts who have created and redesigned visual identity projects for Nikkei restaurants and other food items were interviewed. Additionally, the double diamond methodology was used to carry out the process of elaboration of the visual graphics.The main results obtained through the design proposal were positive, since the users considered that the new graphics did reflect the food offered. Likewise, the logo was related to the Nikkei culture, the menu was considered clear and direct, the images helped to understand the product to be consumed and the packaging seemed innovative and different, generating a unique experience
Trabajo de Suficiencia Profesional

Packaging has been on the environmental agenda for decades. It has been discussed and debated within the society mainly as an environmental problem. Production, distribution and consumption of food and drinks contribute significant to the environmental impact. However, consumers in the EU waste about 20% of the food they buy. The function of packaging in reducing the amount of food losses is an important but often neglected environmental issue. This thesis focuses on the functions of packaging that can be used to preserve resources efficiently and reduce the environmental impact of the food-packaging system. The service perspective is used to increase knowledge about consumer interaction with packages. Fifteen packaging attributes, for example, ‘easy to empty’, ‘hygienic’ and ‘contain the right quantity’, were identified as influencing the amount of food losses at the consumer. The result showed that there are potentials to both increase consumer satisfaction and decrease the environmental impact of the food-packaging system, when new packaging design reduces food losses. A model was developed that calculates the balance of environmental impact between reduction of food losses, and more packaging material. The result showed that it can be environmentally motivated to increase the environmental impact of packaging, if the amount of food losses is reduced. This is especially true for food items with high environmental impact, e.g. meat and dairy products, and for food items that have a high share of loss, e.g. bread. I have also explored to what extent packaging can influence food losses in households. The study showed that about 20% to 25% of household food waste was related to packaging. The households noted three packaging attributes as the main causes for food losses; ‘too big packaging’, ‘difficult to empty’ and ‘best-before-date’. Finally there is a discussion of packaging research in the context of sustainability principles, and suggestions for further research.

Paper IV was still a manuscript at the time of the thesis defense.

The global amount of waste generated by households, including food packaging waste, has been increasing continuously across the world, posing a massive threat to societies and the environment. Proper waste management, therefore, has become a challenging environmental issue and a priority for governments. Along with the technological advances, such as material recovery technologies, more stress has been placed on the strategies for moving away from disposal to waste prevention, separation, and recycling. Considerable efforts are being made to not only limit the overall production and the negative impact of waste on the environment and human health but also to minimize the cost of waste management. Separation of wastes at the source (i.e., source separation) is an integral part of such efforts toward enhancing the purity of collected waste and improving the quality of materials for recycling. Furthermore, sorting of waste as a habitual performance can serve as a practice for improving residents' recycling/sorting behavior. The packaging waste, including food packaging, forms a significant part of the municipal solid waste. The design of food packaging, therefore, has received a lot of attention as a useful tool to influence the consumers' sorting behavior, making it an interesting concept for research related to waste management. Presumably, the design of food packaging can meet consumers' sorting demands while being instructive and facilitating the sorting process, thus enhancing the recycling rate of the food packaging waste. Finding the ideal form of food packaging, however, requires an in-depth understanding of the packaging-consumer interactions throughout the sorting process. Considering the different characteristics of food packaging, it is expected that different food packages tend to influence a consumer in different ways. Nevertheless, the current knowledge is somewhat too general to be used by packaging developers to improve the sorting of the food packaging. Hence, the present thesis aims to provide a more in-depth insight into the influence of food packaging, as a product and service provider, on the consumer's/user's decision-making on sort of food packaging waste. The results assert that packaging to be sorted properly requires proper design to manifest its sorting related abilities such as easy to empty, easy to clean, and easy to fold, for the consumer. Selecting material, visual attributes, form, and function can amplify or reduce these sorting abilities of food packaging.

This research centres on product package design related to older people's emotional needs. In particular, knowledge concerning the design of packages for transgenerational use linked to background social data has been elicited. The most distinctive accomplishment has been an exploration of the visual appeal of packaging design in relation to age, gender, education and emotional preference of older consumers. Findings are primarily related to the interaction older people in the UK with selected aspects of package design. Three areas of research have been brought together in this thesis: packaging design and multiple choice, emotional/psychological preference for packaging design characteristics and colour appeal associated ..w ith food character in packaging design. Investigations into the 'third age' and classifications beyond utilised a large sample from the 'Thousand Elders' and a range of packaging designs for selected food items. The significant findings indicate that familiarity and emotional response to packaging designs are key determinants in older consumers' intentions to purchase. Design relating to overall perception or technical cognition are shown to correlate with age related emotional feelings of arousal. Specific findings on such correlations are described in detail. A further 'emotional appeal' was found with colour; for example, green, yellow or bright tones were the most popular colour hue and value associated with varied qualities for food packaging design for specific age groups. Differences between ages, gender and education levels (hypothesised variables linked to design choices) are also analysed and correlated; for example, gender and age rather than educational level combinations appeared to significantly influence choice. Males aged between 55 and 64 relied on their experience of functional aspects for packaging design when considering a purchase. Females in the older age group of 65-74 were more emotional and considered visual appeal in a more personal way. However, few distinguishable psychological effects were noted for the over 75 year olds in their relationship with design. Personal characteristics of older people and their choice are presented in a combination of qualitative interpretation and numeric analysis. Key findings relate to the specific nature of older consumers behaviour in their engagement with packaging design.

Mestrado em Biotecnologia
A produção de plásticos, baseados no uso de combustíveis fósseis, está a aumentar e estima-se que esta tendência continuará no futuro com impactos ambientais consideráveis. Os bioplásticos são uma alternativa amiga do ambiente. Biopolímeros como quitosana já foram adotados com sucesso para produzir bioplásticos que agem como substitutos do plástico em embalagem. A quitosana foi selecionada devido às suas numerosas vantagens para embalagem alimentar, principalmente devido às suas atividades antioxidantes e antimicrobiana. Por outro lado, o dióxido de titânio foi selecionado como aditivo devido à sua capacidade de retirar oxigénio do ambiente e devido à possibilidade de poder ser facilmente funcionalizado para a formação de um sensor. Isto permitiria a formação de uma embalagem ativa e inteligente na proteção do alimento. Assim, nanopartículas homogéneas arredondadas e monofásicas de anatase de dióxido de titânio (TiO2) foram usadas para melhorar os filmes de quitosana, criando um bionanocompósito. Estas nanopartículas de TiO2 foram produzidas por síntese hidrotermal, tendo sido otimizadas as condições de síntese, como a temperatura e tempo, para selecionar as condições que originam as nanopartículas com as caraterísticas desejadas. As condições escolhidas para a produção do TiO2 foram 200 ºC e 2,5 h devido ao tamanho, dispersão e tipo de nanoparticulas de TiO2 produzidas. Os filmes de quitosana foram preparados com cerca de 9 mg de nanopartículas de TiO2. Para criar uma embalagem ativa e inteligente compostos fenólicos (principalmente antocianinas) de arroz preto (Oryza sativa L. Indica) foram adicionados para funcionalizar o TiO2 (4,1 mg de extrato por filme). Os filmes foram caracterizados em relação à sua atividade antioxidante, humidade, solubilidade, hidrofobicidade da superfície e propriedades mecânicas. Os melhores resultados foram obtidos nos filmes com nanopartículas e compostos fenólicos e foi demonstrado que a forma como cada componente é adicionado altera as suas propriedades. Os melhores resultados foram o aumento da atividade antioxidante, diminuição da solubilidade e da elasticidade, elongação e resistência à tração no filme composto por pigmento e TiO2,. No entanto nestes últimos três parâmetros, a sua diminuição pode ser um aspeto positivo ou negativo dependendo das propriedades desejadas para o filme e o produto alimentar a embalar
Plastic production based in fossil fuels is rising, and predictions supports it continuous and enhanced use, with consequent environmental damage. Bioplastics are an environmentally friendly alternative. Biopolymers as chitosan have already been successfully used to produce bioplastics that act as plastic substitutes in packaging. Chitosan was chosen for its numerous advantages for food packaging namely due to its antioxidant and antimicrobial activities. On the other hand, TiO2 was selected due to its oxygen scavenging ability and due to its possibility to be easily functionalised to create a sensor. This would allow the construction of an active and intelligent packaging for food protection. Thus, monophasic anatase homogeneous round-shaped nanoparticles of titanium dioxide (TiO2) were used as filler to improve the chitosan films, creating a bionanocomposite. These TiO2 nanoparticles were produced via a hydrothermal method and its synthesis was optimized testing various reaction times and temperatures to find the conditions that create TiO2 nanoparticles with the desired features. The conditions used for the chosen TiO2 were 200 ºC and 2.5 h due to the size, dispersion and TiO2 of the nanoparticles produced. The chitosan films were prepared with about 9 mg of TiO2 nanoparticles. To develop an active and intelligent food packaging, phenolic compounds (mainly anthocyanins) from black rice (Oryza sativa L. Indica) were used to functionalise the TiO2 (4.1 mg of extract in each film). The films were characterised regarding its antioxidant activity, humidity, solubility, surface hydrophilicity and mechanical properties. The best results were from films with both nanoparticles and phenolic compounds, and it was established that the order in which they are added alters its properties. The more notable improvements are an increase in antioxidant activity and a decrease in solubility, elasticity, elongation and tensile strength in the film containing pigment and TiO2. However, the reduction of the later three properties can either be positive or negative, it depends on desired properties for the film for a chosen food product

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics
While there is extensive research regarding the impact of television on food choices, much less is focused on an instrument able to change beliefs at the point-of-purchase: packaging. This study aims to understand how food packaging can influence children‟s attitudes and purchase decisions towards healthier choices. Therefore, the appealing components of junk food packaging will be transferred to healthy food in order to understand its effect on children: Package Evaluation, Attention to Packaging, Attitude toward the Product, Perceived Healthiness, and Purchase Intention. To measure these variables, structured questionnaires were conducted to a sample composed by 408 Portuguese children aged between 10 and 14 years old from 5th to 9th grades. This study suggests that packaging can be a way to increase the appeal of healthy food to children and, consequently, improve their food choices, taking into consideration their values and preferences.

Considering the increasing competition between brands and products, packaging has become an important framing tool to influence customers' purchasing decisions. However, given the growing environmental concerns, zero packaging has emerged as a new practice to face the challenges of preventing and encouraging the use of packaging. With the introduction of zero packaging, marketers have been forced to reframe the practice of packaging, as artifacts used to create identification and familiarity to form a state of resonance have been removed. To extend the research of resonance within the marketing communication science, the study employed a qualitative approach to explore how food retailers are utilizing the framing concept of resonance as a means to revamp the traditional packaging into zero packaging. To reframe the practice of packaging, the study embraces the concept of cognitive and emotional resonance. The findings impose that food retailers need to create personal alignments with product artifacts, environmental values and containers. By reviewing the contextual marketing communication field, zero packaging, a third resonance was utilized to understand how the food retailers adequately attract, change and retain customers. Subsequently, affirmation was discovered as the key mechanism to achieve motivational resonance, by interfering with customers’ intrinsic and personalized values/desires.

Thesis (PhD)--Stellenbosch University, 2013.
ENGLISH ABSTRACT: Modified atmosphere packaging (MAP) is a dynamic process of altering gaseous composition inside a package. It relies on the interaction between the respiration rate (RR) of the produce, and the transfer of gases through the packaging material. These two processes are dependent on numerous factors such as storage temperature, film thickness and surface area, produce weight as well as free headspace within the pack. Therefore, in order to achieve the desired modified atmosphere in a given package, it is important to understand the three basic disciplines of MAP, namely produce physiology, polymer engineering, and converting technology. In this study the effects of storage conditions and duration on physiological responses i.e. respiration (RR) and transpiration rate (TR) of two pomegranate cultivars ‘Acco’ and ‘Herskawitz’, were investigated and mathematical models were developed to predict these physiological responses at given time and storage conditions. The result of this study showed that RR of whole pomegranate fruit was significantly higher than that of fresh arils, and that temperature had a significant impact on the RR of both whole fruit and fresh arils. The influence of time, and the interaction between temperature and time also had significant influences on RR of fresh pomegranate arils. These findings highlight the significance of maintaining optimal cold-storage condition for packaged arils or whole fruit along the supply chain. In addition, mathematical models based on the Arrhenius-type equation and the power function equation coupled with Arrhenius-type equation accurately predicted the effect of temperature and the influence of time and temperature on the RR of fresh pomegranate arils for both cultivars. Furthermore, the results of experimental and model prediction studies showed that both relative humidity (RH) and storage temperature had significant effects on TR. RH was the variable with the greatest influence on TR, and it was observed that arils were best kept at 5°C and 96% RH to maintain quality for 8 days. The applicability of the transpiration model developed was validated based on prediction of TR of pomegranate arils under different combinations of storage conditions. The model adequately predicted TR and provides a useful tool towards understanding the rate of water loss in fresh pomegranate arils as affected by storage conditions and duration. The effect of passive-MAP engineering design parameters as a function of produce weight contained, storage temperature and duration on fresh pomegranate arils was investigated. The result showed that produce weight of aril content, temperature and the interaction between temperature and time had slight but insignificant effects on measured physicochemical quality attributes. However, headspace gas concentration was significantly influenced by produce weight and storage temperature. Oxygen (O2) composition decline below 2% after day 3 and 5 at 15 and 10 ºC, respectively, while samples at 5 °C did not reach below 2% throughout the study. On the other hand, CO2 levels increased significantly during storage for all packaging conditions. This study showed the importance of a systematic approach to the design of optimal MAP systems. At lowest storage temperature the inability to achieve desired modified atmosphere (MA) required for optimal storage of arils despite the increase in produce weight, suggests that the use of active gas modification (gas flushing with recommended atmosphere) would be necessary. However, the present results show that at higher temperature macro/micro perforations would be required on the polymeric films used in the present study in order to avoid critical levels of O2 and CO2. The influence of passive MAP, storage temperature and duration on volatile composition and evolution of packaged pomegranate arils was investigated. The results showed that changes in aroma compounds were dependent on cultivar differences, storage condition and duration. Using GC-MS analysis of pomegranate juice HS-SPME extracts, a total of 18 and 17 volatiles were detected for ‘Herskerwitz’ and ‘Acco’, respectively. Furthermore, flavour life (7 days) was shorter than the postharvest life (10 days) for both cultivars. There was a decrease in volatile composition during the storage period (aldehydes < alcohols < esters) while the concentration (%) and composition of ethyl esters increased with storage time. These results highlight the need for a more precise definition of flavour shelf life for MApackaged pomegranate arils and other packaged fresh produce. The importance of maintaining optimal cold storage condition, selection of appropriate packaging materials and a systematic approach to the design and application of MAP systems has also been shown.
AFRIKAANSE OPSOMMING: Gemodifiseerde atmosfeer-verpakking (GAV) is ’n dinamiese proses waartydens die gassamestelling binne-in ’n verpakking gewysig word. Dit berus op die wisselwerking tussen die respirasietempo (RT) van die produkte en die oordrag van gasse deur die verpakkingsmateriaal. Hierdie twee prosesse is van verskeie faktore soos bergingstemperatuur, dikte van die film en oppervlakte, gewig van die produkte asook vry boruimte binne-in die pakkie afhanklik. Om dus die gewenste gemodifiseerde atmosfeer in ’n gegewe verpakking te verkry, is dit belangrik om die drie fundamentele dissiplines van GAV te begryp, naamlik produkfisiologie, polimeerontwerp, en omsettingstegnologie. In hierdie studie is die gevolge van bergingstoestande en -duur op fisiologiese reaksie, met ander woorde, respirasie- (RT) en transpirasietempo (TT) van twee geselekteerde granaatkultivars ‘Acco’ en ‘Herskawitz’, ondersoek en wiskundige modelle is ontwikkel om ons in staat te stel om hierdie fisiologiese reaksies by gegewe tyd- en bergingstoestande te voorspel. Die resultaat van hierdie studie het aangetoon dat die respirasietempo (RT) van heel granaatvrugte aansienlik hoër was as die RT van vars arils, en temperatuur het beduidende uitwerking op RT van beide heel vrugte en vars arils gehad. Die invloed van tyd, en die wisselwerking tussen temperatuur en tyd het ook ’n beduidende invloed op die RT van vars granaatarils gehad. Hierdie bevinding beklemtoon die belang van die handhawing van optimale koelbewaringstoestande vir verpakte arils of heel vrugte met die aanvoerketting langs. Daarbenewens wiskundige modelle wat gebaseer op die Arrhenius-tipe vergelyking en die magsfunksie-vergelyking gepaard met Arrhenius-tipe vergelyking, die uitwerking van temperatuur en die invloed van tyd en temperatuur op die RT van vars granaatarils vir beide kultivars onderskeidelik voldoende en akkuraat voorspel. Afgesien die resultate van eksperimentele en modelvoorspellings die studies aangetoon dat beide relatiewe humiditeit (RH) en bergingstemperatuur ’n beduidende uitwerking op TT het. RH was die veranderlike met die grootste invloed op TT, en it was waargeneem dat dit die beste was om arils teen 5°C en 96% RH te bewaar (8 dae). Die toepaslikheid van die transpirasiemodel wat ontwikkel is, is bevestig op grond van voorspelling van TT van granaatarils onder verskillende kombinasies van bergingstoestande. Die model het TT voldoende voorspel en sou ’n bruikbare instrument wees ten einde die waterverliestempo in vars granaatarils en ander vars produkte, soos deur bergingstoestande en duur beïnvloed, te begryp. Die uitwerking van passiewe-GAV ontwerpparameters as ’n funksie van gewig van die produkte, bergingstemperatuur en duur op vars granaatarils is ondersoek. Dit het aan die lig gebring dat gewig van die produkte, temperatuur en die wisselwerking tussen temperatuur en tyd ’n geringe maar onbeduidende uitwerking op gemete fisikochemiese gehalteeienskappe gehad het. Die gaskonsentrasie in die boruimte is betekenisvol beïnvloed deur gewig van die produkte en bergingstemperatuur. Die O2-samestelling het tot benede 2% gedaal na 3 en 5 dae by 15 en 10 ºC, onderskeidelik, terwyl monsters by 5 °C deur die studie heen nooit laer as 2% was nie. Aan die ander kant, CO2-vlakke het gedurende berging betekenisvol verhoog wat betref alle verpakkingstoestande. Hierdie studie het die belangrikheid van ’n sistematiese benadering by die ontwerp van ’n optimale GAV-stelsel aangetoon. By die laagste bergingstemperatuur dui die onvermoë om die gewenste gemodifiseerde atmosfeer (GA) wat vir optimale berging van arils benodig word, te verkry – ondanks die toename in die gewig van die produkte – daarop dat die gebruik van aktiewe gasmodifisering (gasspoeling met aanbevole atmosfeer) nodig sou wees. Egter die huidige uitslae aangetoon dat by hoër temperatuur, sou makro/mikroperforasies op die polimeerfilms wat gebruik word in die onderhawige studie egter nodig wees ten einde kritiese vlakke van O2 en CO2 te verhoed. Die invloed van passiewe GAV, bergingstemperatuur en duur op onstabiele samestelling en evolusie van verpakte granaatarils is ondersoek. Die resultate aangetoon dat veranderinge in aromaverbindings afhanklik was van kultivarverskille, bergingstoestande en duur. Met behulp van GC-MS-analise van granaatsap HS-SPME-ekstrakte, het ons ’n totaal van 18 en 17 vlugtige stowwe vir ‘Herskawitz’ en ‘Acco’, onderskeidelik bespeur. Verder het ons waargeneem dat die smaakleeftyd (7 dae) korter was as die na-oesleeftyd (10 dae) vir beide kultivar. Daar was ’n afname in vlugtige samestelling (aldehiede < alkohole < esters) terwyl die konsentrasie (%) en samestelling van etielesters het met bergingstyd verhoog. Hierdie resultate het die aandag gevestig op die behoefte aan ’n meer presiese definisie van geur-raklewe vir GA-verpakte granaatarils en ander verpakte vars produkte. Die belang van die handhawing van die optimale koelbewaringstoestand, seleksie van geskikte verpakkingsmateriaal en ’n sistematiese benadering tot die ontwerp van ’n optimale GAVstelsel, is ook beskryf.

Microwave heating of food has increased rapidly as a food processing technique. This increases the concern that chemicals could migrate from food packaging to food. The specific effect of microwave heating in contrast to conventional heating on overall and specific migration from common plastic food storage boxes was studied in this work. The purpose was especially to determine the interaction effects of different plastics in contact with different types of foods during microwave heating. The study focused on polycarbonate (PC), poly(ethylene terephthalate) (PET), polypropylene homo-polymer (PP), co-polymer (PP-C) and random co-polymer (PP-R) packages. The migration determinations were evaluated at controlled times and temperatures, using a MAE device. The migrants were analyzed by GC-MS and HPLC. ESI-MS was evaluated as a new tool for migration determinations. Food/food simulant absorption and changes in degree of crystallinity during heating were also followed. Significant degradation of antioxidants Irgafos 168 and Irganox 1010 in PP packages occurred during microwave heating of the packages in food simulants containing ethanol, resulting in the formation of antioxidant degradation products. Degradation of PC by Fries chain rearrangement reaction leading to formation of 9,9-dimethylxanthene, and transesterification of PET leading to formation of diethyl terephthalate, were also observed after microwave heating the packages in ethanol and 90/10 isooctane/ethanol. These reactions were not observed during conventional heating of the packages at the same temperature, or after microwave heating of the packages in liquid food (coconut milk). The microwave heating also significantly increased the migration of cyclic oligomers from PET into ethanol and isooctane at 80 °C. Migration of compounds into coconut milk was slightly lower than calculated amounts using the EU mathematical model to predict migration of additives into foodstuffs. The results thus show that the use of ethanol as a fat food simulant during microwave heating can lead to a significant overestimation of migration as well as degradation of polymer or the incorporated additives. Some other detected migrants were dimethylbenzaldehyde, 4-ethoxy-ethyl benzoate, benzophenone, m-tert-butyl phenol and 1-methylnaphthalene. All identified migrants with associated specific migration limit (SML) values migrated in significantly lower amounts than the SML values during 1 h of microwave heating at 80 °C. The antioxidant diffusion coefficients in PP and PP co-polymers showed larger relative differences than the corresponding degrees of crystallinity in the same polymers and PP-R showed by far the fastest migration of antioxidants.
Mikrovågsuppvärmning av mat har ökat markant under de senaste åren. Detta ökar risken för att ämnen i plast migrerar från matförpackningar till mat. Den specifika effekten av mikrovågsvärmning i kontrast till konventionell värmning på total och specifik migrering från vanliga matförvaringslådor av plast studerades i denna avhandling. Syftet var i huvudsak att bestämma interaktionseffekter mellan olika typer av plaster och olika typer av mat under mikrovågsvärmning. Studien fokuserades på förpackningar av polykarbonat (PC), polyetentereftalat (PET), polypropylen homopolymer (PP), copolymer (PP-C) och random copolymer (PP-R). Migreringstesterna utfördes under kontrollerade tider och temperaturer genom att använda MAE. Migranterna analyserades med hjälp av GC-MS och HPLC. ESI-MS-analys utvärderades också som ny analysmetod för migreringstester. Absorption av mat- och matsimulanter samt förändringar i kristallinitetsgrad följdes också. Signifikant nedbrytning av antioxidanterna Irgafos 168 och Irganox 1010 i PP-förpackningar inträffade under mikrovågsvärmning av förpackningarna i etanol-innehållande matsimulanter, vilket resulterade i bildning av nedbrytningsprodukter från antioxidanterna. Nedbrytning av PC genom en Fries omfördelningsreaktion, vilket orsakade bildning av 9,9-dimetylxanten, samt transesterifikation av PET, vilket orsakade bildning av dietyltereftalat, observerades också efter mikrovågsvärmning av förpackningarna i etanol och 90/10 isooktan/etanol. Dessa reaktioner observerades ej efter konventionell värmning av förpackningarna under samma temperatur och ej heller efter mikrovågsvärmning av förpackningarna i riktig mat (kokosmjölk). Mikrovågsvärmningen ökade också betydelsefullt migrering av cykliska oligomerer från PET till etanol och isooktan under 80 °C. Specifika ämnens migrering till kokosmjölk var alla något lägre än migreringsvärden beräknade m. h. a. EU's officiella matematiska modell för förutsägelse av migrering från matförpackningar till mat. Dessa resultat visar att användandet av etanol som matsimulant för fet mat under mikrovågsvärmning kan leda till betydande överestimering av migrering, samt nedbrytning av polymer och additiv i polymeren. Andra detekterade migranter var till exempel dimetylbenzaldehyd, 4-etoxy-etylbenzoat, benzofenon, m-tertbutylfenol och 1-metylnaftalen. Alla identifierade migranter med tillhörande ‘specific migration limit’ (SML)-värden migrerade i betydelsefullt mindre mängder än ämnenas tillhörande SML-värden under 1 h mikrovågsvärmning under 80°C. Diffusionskoefficienterna för antioxidanterna i PP-förpackningarna visade större relativa skillnader än förpackningarnas motsvarande kristallinitetsgrader och migrering av antioxidanter var snabbast från PP-R.

QC 20120530

This thesis explores novel DV -activated, oxygen-sensitive systems. Thus, photochemical versions of the thermal blue-bottle experiment are used to illustrate the kinetics of PET reactions in homogeneous and heterogeneous photochemistry; the former via the visible light photobleaching of a MB/TEOA solution, and fast recovery in air, and the latter via the DV photobleaching of MB in a Ti02/glucose aqueous dispersion, with slow recovery, but which can be catalysed by Pt. A novel, acetone-based, water-proof Ti02/MB/glycerol/SPS colorimetric oxygen indicating film that coats on hydrophobic polymers is prepared, and is readily photobl~ached but recovers slowly. The rate of photobleaching is dependent upon DV A irradiance, [glycerol], [Ti02] and [MB]. The kinetics of the dark recovery were dependent upon T, %02, and RH. Ethanol replaced acetone, and a Pt catalyst was introduced - i.e. a Pt-Ti02/MB/glycerol/SPS colorimetric oxygen indicator, printable by flexo printing, resulted. The indicator is readily photobleached and recovery times reduced, with linear dependence upon %Pt loading. The recovery kinetics are zero order with respect to [LMB](, moderately dependent upon temperature, and sensitive to relative humidity. Pigment particles (MB and DL-threitol coated onto Ti02) are prepared and extruded in LDPE, to create a water-proof, solvent-based O2 smart plastic film. The blue-coloured indicator is readily photobleached and recovers in ~2.5 days. The rate of photobleaching is dependent upon the irradiance of UV A light. The rate of recovery is dependent upon %02, relative humidity and temperature. A Ti02 colloid is prepared for use with MB in a colorimetric oxygen indicating ink. This ink is suitable for printing onto polyester film by a DOD PU printer. The blue-coloured indicator is readily photobleached and recovers in - 12 hours in ambient air. The rate of recovery is linearly dependent upon the %02, moderately dependent upon relative humidity at 21 "C, and reduced upon reducing temperature.

Packaging is a largely neglected object of enquiry in Human Geography and, indeed, the social sciences more broadly. Yet it forms a crucial element of almost all food systems and without such mundane objects these food systems would fail or function very differently. In turn, food systems, which rely on the continuous flow of packaging and food, are vital for enabling our increasingly mobile lives. This thesis thus investigates the multiple mobilities associated with food and drink packaging. The study forms part of a wider ‘mobilities turn’ in the social sciences and is structured in two parts. The first part concentrates primarily on how packaging shapes the movement of food. The second part focuses more on the ways in which packaged food shapes the mobilities of humans. However, both these aspects of packaging’s mobile life are not viewed as separate but rather as entangled and mutually dependent on each other. Throughout the thesis attention is paid to how packaging helps standardise the repetitive and anticipated mobilities of food and humans. It is, in other words, examined as an immutable mobile that ensures the smooth flows of food and people. Thus, in the first part of the thesis it is shown how packaging ensures the smooth flows associated with highly automated, industrialised and safe packaged food production and distribution. It also opens up the mobilities of packaging to elaborate upon the similarly regular and anticipated flows of packaging as raw materials. In the second part of the thesis attention is directed towards the patterns of human mobility that packaged food permits. However, while emphasis is placed on the role of packaging in standardising and stabilising interrelated food and human mobilities across Euclidean spaces, the thesis also begins to interrogate the topological complexities and molecular mobilities of packaging. While packaging can certainly be seen to permit the smooth and relatively unproblematic flows of food and people it may also, and from another theoretical perspective, be viewed as a fluid and vibrant technology. These topologically complex movements of packaging are explored in cases that show its fluid articulation as a barrier which has profound implications for the regulated mobilities of food. The vibrancy of packaging is also examined through its importance for mobile practices and its capacity to affect travellers.

The food packaging industry is a £300bn global industry growing at a rate of 12% per year and increasingly favouring polymer or polymer-based materials. This generates 58m tonnes of "plastic" packaging waste annually in the EU and poses significant challenges for management given existing legislative constraints and increasing concerns surrounding the environmental impacts. The government, consumers, food retailers and pressure groups are all driving the demand for biodegradable packaging from renewable resources that can be disposed of with reduced impacts to the environment. Green Peace has devised a pyramid classification system of "Poisonous Plastics", which ranks plastics in terms of their harmfulness to the environment. They are campaigning against the use of oil-based materials and advocating the take up of biodegradable materials. The market for biodegradable food packaging is expanding rapidly but is still in its early stages of development and has not reached a critical mass to achieve significant market penetration. This is predominantly due to a lack of suitable materials that meet all environmental, functional and economical requirements. Whilst the long-term solution requires continued efforts in materials research and development, in the shorter term, changing working practices can abate the environmental impact of the industry. This research project tackled the challenge of environmental packaging from several directions: A novel starch-based material was developed that would fill the current gap in the food packaging market and facilitate recovery of the used materials by home composting. Using the sponsoring organisation as a case study, it was proved that by changing working practices by increasing rework and re-processing waste material for use in lower grade applications, both manufacturing costs and environmental impact can be reduced, thus benefiting both industry and the environment. A Life Cycle Assessment of selected biopolymers and oil-based polymers confirmed Green Peace's damning view of PVC and highlighted the need to develop biopolymers further. A domestic composting study of a range of commercially available "biodegradable" polymer materials revealed that a number of biodegradable packaging materials may typically biodegrade well in industrial high-temperature composting systems but fail to biodegrade under a low-temperature home composting environment and thus alerted the potential pitfall in waste management of some biodegradable polymers.

Thesis (Master)--İzmir Institute of Technology, İzmir, 2005.
Keywords: Biopreservatives, antimicrobial enzymes, antioxidant proteins, edible films, functional packaging materials. Includes bibliographical references (leaves.88-101).

Food packaging should ensure the safety and quality of food, minimize spoilage and provide an easy way of storing and handling it. Barrier coatings are generally used to meet the demands placed on fibre-based food packages, as these have the ability to regulate the amount of gases that can enter them. Some gases are detrimental to food quality: oxygen, for example, initiates lipid oxidation in fatty foods. Using both experimental data and computer modelling, this thesis explains some aspects of how the structure of barrier coatings influences the mass transport of oxygen with the aim of obtaining essential knowledge that can be used to optimize the performance of barriers. Barrier coatings are produced from polyvinyl alcohol and kaolin blends that are coated onto a polymeric support. The chemical and physical structures of these barriers were characterized according to their influence on permeability in various climates. At a low concentration of kaolin, the crystallinity of polyvinyl alcohol decreased; in the thinner films, the kaolin particles were orientated in the basal plane of the barrier coating. The experimental results indicated a complex interplay between the polymer and the filler with respect to permeability. A computer model for permeability incorporating theories for the filled polymeric layer to include the polymer crystallinity, addition of filler, filler aspect ratio and surrounding moisture was developed. The model shows that mass transport was affected by the aspect ratio of the clay in combination with the clay concentration, as well as the polymer crystallinity. The combined model agreed with the experiments, showing that it is possible to combine different theories into one model that can be used to predict the mass transport. Four barrier coatings: polyethylene, ethylene vinyl alcohol + kaolin, latex + kaolin and starch were evaluated using the parameters of greenhouse gas emissions and product costs. After the production of the barrier material, the coating process and the end-of-life handling scenarios were analysed, it emerged that starch had the lowest environmental impact and latex + kaolin had the highest.
Food packaging is required to secure the safety and quality of food, as well as minimize spoilage and simplify handling. Barrier coatings are generally used to meet the demands placed on fibre-based food packages, as these have the ability to regulate the amount of gases that can enter them. Some gases are detrimental to food quality: oxygen, for example, initiates lipid oxidation in fatty foods. This thesis focuses on the mass transport of oxygen in order to gain deeper knowledge of, and thereby optimise, the performance of barrier coatings. This experimental study, together with computer modelling, characterized the structure of barrier materials with respect to the mass transport process. The performance of the barriers was evaluated based on the parameters of environmental impact and product costs. As the long-term aim is to use non-petroleum-based barrier coatings for packaging, these should be evaluated by assessing the properties of the material in question, its functionality and its environmental impact to provide more insight into which materials are desirable as well as to develop technology. The results from this study indicate that several parameters (the orientation, concentration and aspect ratio of the clay and the polymer crystallinity) influence the properties of a barrier. Using this knowledge, researchers and food packaging engineers can work toward improving and customising renewable barriers.
VIPP

This thesis studies optoelectronic devices and the integration of these components onto optoelectronic multi chip modules (OE-MCMs) using a combination of packaging techniques. For this project, (1×12) array photodetectors were developed using PIN diodes with a GaAs/AlGaAs strained layer structure. The devices had a pitch of 250μm, operated at a wavelength of 850nm. Optical characterisation experiments of two types of detector arrays (shoe and ring) were successfully performed. Overall, the shoe devices achieved more consistent results in comparison with ring diodes, i.e. lower dark current and series resistance values. A decision was made to choose the shoe design for implementation into the high speed systems demonstrator. The (1x12) VCSEL array devices were the optical sources used in my research. This was an identical array at 250μm pitch configuration used in order to match the photodetector array. These devices had a wavelength of 850nm. Optoelectronic testing of the VCSEL was successfully conducted, which provided good beam profile analysis and I-V-P measurements of the VCSEL array. This was then implemented into a simple demonstrator system, where eye diagrams examined the systems performance and characteristics of the full system and showed positive results. An explanation was given of the following optoelectronic bonding techniques: Wire bonding and flip chip bonding with its associated technologies, i.e. Solder, gold stud bump and ACF. Also, technologies, such as ultrasonic flip chip bonding and gold micro-post technology were looked into and discussed. Experimental work implementing these methods on packaging the optoelectronic devices was successfully conducted and described in detail. Packaging of the optoelectronic devices onto the OEMCM was successfully performed. Electrical tests were successfully carried out on the flip chip bonded VCSEL and Photodetector arrays. These results verified that the devices attached on the MCM achieved good electrical performance and reliable bonding. Finally, preliminary testing was conducted on the fully assembled OE-MCMs. The aim was to initially power up the mixed signal chip (VCSEL driver), and then observe the VCSEL output.

El objetivo principal de la presente investigación es analizar los elementos gráficos del diseño de información que facilitan la comprensión del consumidor en los empaques alimenticios. Así mismo, se busca analizar el impacto del diseño de información en los usuarios. Para ello se realizaron entrevistas con expertos en los campos detallados y posteriores encuestas a consumidores. La población total estuvo conformada por adultos de entre 30 a 55 años, se analizó este rango de edad ya que comprende a personas que suelen fijarse más en los datos y beneficios de un producto al momento de realizar una compra, además son los principales responsables de las compras del hogar. Se evaluó a aquellos que suelen comprar en supermercados ubicados en Lima moderna, en distritos como; San Miguel, San Isidro, Miraflores, Surco, San Borja, La Molina, Pueblo Libre, Jesús María y Magdalena del Mar. Se determinó que, según los resultados del trabajo de campo, los elementos dentro del diseño de información que facilitan la comprensión de los usuarios son: el uso de figuras, diagramas, iconografía, tipografías adecuadas y la correcta síntesis y organización de la información. Estos elementos deben ser tomados en cuenta y respetados por los diseñadores con la finalidad de garantizar el entendimiento de los usuarios.
The main objective of this research is to analyze the graphic elements of the information design that facilitate consumer understanding of food packaging. Likewise, it seeks to analyze the impact of information design on users. For this, interviews with experts in the detailed fields and subsequent consumer surveys were performed. The total population of this project were adults between 30 to 55 years old, it was decided to analyzed this age range because it includes people who tend to look more at the data and benefits of a product when making a purchase. It evaluates those who usually buy in affected supermarkets in modern Lima in districts like; San Miguel, San Isidro, Miraflores, Surco, San Borja, La Molina, Pueblo Libre, Jesús María and Magdalena del Mar. It was determined that, according to the results of the field work, the elements within the design of information that facilitate the understanding of the users are: the use of figures, diagrams, iconography, adequate typefaces and the correct synthesis and organization of information. These elements must be taken into account and respected by the designers with the intention to guarantee the understanding of the users.
Trabajo de investigación

The object of this research was to develop a retort for research and development of thermal processes which use common commercial thermal processing techniques. An FMC 500W laboratory sterilizer, designed to operate with an FMC weir product racking system, was modified for conventional steam, positive flow steam/air and water immersion/air overpressure thermal processing of foods in thin profile retortable packages. The research included the modification of the retort plumbing and the fabrication of a set of product trays and a racking system. The completed system was tested for temperature distribution and stability, and heat transfer distribution for each processing mode. The latter was achieved by comparing the heat penetration parameters calculated from the centerpoint temperature histories of conduction heating teflon transducers.
Applied Science, Faculty of
Graduate

Matte surfaces, that is, those that are dull or lusterless not glossy and shiny, are a current trend in packaging. But does packaging surface affect what consumers think about the product inside it? We focus on consumers' perception of packaged food products at the point of sale. Using three experiments, we show that food in matte packaging can be perceived as more natural. Notably, the effect of matte packaging only holds for rather artificial products. When matte packaging increases perceptions of product naturalness, consumers also expect the product to be tastier and are more likely to buy it.

Thesis submitted in fulfilment of the requirements for the degree Master of Technology: Chemistry in the Faculty of Applied Sciences at the Cape Peninsula University of Technology
Paperboard made from recycled fibres is being used more frequently in direct food packaging applications, in addition to its use as secondary and tertiary packaging. However, recent research has shown that there is a risk that harmful chemicals may migrate from the paperboard into the food. The simplest approach to reducing the migration of these contaminants is the use of barrier films. The barrier efficiencies of these various films can be examined by means of a migration test into a food simulant, followed by extraction in a suitable solvent. The extract can then be analysed by chromatographic techniques such as gas chromatography mass spectrometry (GC-MS) to determine the concentration of the specific contaminants. However on a production level, the availability of this type of highly specialised equipment is limited. A simple, cost effective method is needed to evaluate the barrier properties to specific chemical contaminants. The Heptane Vapour Transmission Rate (HVTR) test is a permeation test method for use at quality control level to determine barrier properties to the migration of organic vapours. The first part of the study focussed on establishing a universal correlation between HVTR and specific migration of diisobutyl phthalate (DiBP), dibutyl phthalate (DBP) and diethylhexyl phthalate (DEHP) that would be applicable to any type of functional barrier. However, experimental data demonstrated this was not possible as the correlation factor linking HVTR to specific migration was largely dependent on the type and morphology of the coating considered. The initial objective of the study was reconsidered in favour of building individual models specific to the nature of the coating and substrate considered. A correlation between HVTR and specific migration of DiBP, DBP and DEHP for a polyvinylidene chloride (PVDC) barrier polymer was constructed by varying the applied coating weight. The vapour transport mechanism for the HVTR test and the specific migration test were found to differ, showing that a direct correlation between HVTR and the specific migration was again not possible. However, an indirect correlation could be made. The HVTR method gives an indication of film integrity, whereas the coating weight could be used as an indicator of the specific migration. The correlation between the coating weight and the specific migration yielded an equation that can be used to calculate the specific migration through the PVDC barrier polymer, provided the quantity of the chemical contaminant originally present in the paperboard was known. This equation was specific to the type of barrier polymer, the specific chemical contaminant as well as the intended shelf-life of the food product to be packaged in the paperboard.

This thesis reports the systematic approaches to overcome the key drawbacks of the pure PHBV, namely low crystallisation rate, tensile strength, ductility, melt viscosity, thermal stability and high materials cost. The physical, mechanical, thermal, and rheological properties of the pure PHBV were studied systematically first to lay a solid foundation for formulation development. The influence of blending with other biopolymers, inclusion of filler, and chain extender additives in terms of mechanical properties, rheology, thermal decomposition and crystallization kinetics were then followed. Creating lightweight structures by foaming is considered to be one of the effective ways to reduce material consumption, hence the reduction of density and morphology of PHBV-based foams using extrusion foaming technique were studied comprehensively in terms of extrusion conditions (temperature profiles, screw speed and material feeding rate) and the blowing agent content. The material cost reduction was achieved by adding low-cost filler (e.g. CaCO3) and reduction of density by foaming. The thermal instability was enhanced by incorporation of chain extender (e.g. Joncryl) and blending with a high thermal stability biopolymer (e.g. PBAT). The polymer blend also improved the ductility. Adding nucleation agent enhanced the crystallization rate to reduce stickiness of extruded sheet. The final formulation (PHBV/PBAT/CaCO3 composite) was successfully extruded into high quality sheet and thermoformed to produce prototype trays in an industrial scale trial. The effect of the extrusion conditions (temperature profiles, screw speed and material feeding rate) and the blowing agent content are correlated to the density reduction of the foams. 61 and 47 % density reduction were achieved for the commercial PHBV and the PHBV/PBAT/CaCO3 composite respectively and there exists further scope for more expansion if multiple variable optimisation of the conditions are carried out.

Inspiré par la technique couche par couche traditionnelle (LBL), Ce travail de thèse démontre le premier effort pour développer une nouvelle méthodologie pour l’auto-assemblage des multicouches sur la base des interactions hydrophobes et d'adsorption physique pour fabriquer des films composites stratifié en Polyéthylène (LLDPE) - organoargile (OMMT). Contrairement à la technique LbL électrostatique, ici, les films multicouches ont été synthétisés en partant d'un substrat de polymère non polaire/non chargé et successivement le dépôt de couches d’organo-argile apolaire et de couches de PE non polaires/non chargés avec des dépôts répétitifs qui se suivent. La variation alternative de l'angle de contact (85° en moyenne pour l’organo-argile et 107° pour les couches de PE) a confirmé la profilométrie et les résultats de la microscopie électronique à balayage, ainsi que le modèle de croissance linéaire, la formation très stratifiée réussie de bicouches répétitives composées de 450 nm couches d’organo-argiles et 2,25 µm couches de PE. Ultérieurs essais de caractérisation ont été effectués pour évaluer l'effet de la variation des principaux paramètres de processus identifiés (concentration, température, les étapes de rinçage et de séchage, et le type de solvant), sur la formation et la croissance d'épaisseur des films. En conséquence, la forte dépendance de l'auto-assemblage aux paramètres du procédé testés a été montrée par les résultats expérimentaux obtenus. Les propriétés de barrière des films multicouches ont également été évaluées par la caractérisation de la perméabilité à la vapeur d'eau, à l'oxygène (O2) et au dioxyde de carbone (CO2), ainsi que la sorption de la vapeur d'eau. Un revêtement de 5 bicouches (OMMT/PE) (~ 14 µm d'épaisseur) a réduit la perméabilité à l'O2 d'un film de PE de 160 µm d'épaisseur de 84,4% et la perméabilité au CO2 de 70%, tandis que la perméabilité a la vapeur d’eau a été réduite de 45%. Ces réductions de perméabilité obtenues par seulement l’ajout de 2,4% (v/v) de nano-argile se sont révélés être significativement plus élevée par rapport aux valeurs de réduction rapportées dans la littérature pour les nanocomposites dispersés préparés à base de PE/organo-argile. Cette connaissance peut être utilisée dans la mise en place d'une approche pour produire des micro/nanostructures stratifiés ayant des propriétés de barrière sur mesure pour l'application dans l'emballage alimentaire
Inspired by the traditional Layer-by-Layer (LbL) assembly technique, this PhD study demonstrates the first effort to develop a novel methodology for multilayer self-assembly on the basis of hydrophobic interactions and further physical adsorption to fabricate stratified Polyethylene(LLDPE)-organoclay(OMMT) nano-enabled composite film. In contrary to the electrostatic LbL technique, here, the multilayer films were synthesized by starting from an uncharged apolar polymer substrate and successively depositing apolar organoclay and uncharged apolar PE layers with subsequent repeating depositions. The alternate variation of contact angle (85° average for organoclay and 107° for PE layers) confirmed the profilometry and the scanning electron microscopy results as well as the linear growth pattern, i.e. the successful highly stratified assembly of repetitive bilayers comprised of 450 nm organoclays and 2.25 µm PE layers. Further characterization tests were performed to evaluate the effect of the main identified process parameters (concentration, temperature, rinsing and drying steps, and solvent type) variation on the formation and thickness growth of the films. As a consequence, the high dependence of the self-assembly’s growth to the tested process parameters was showed by the obtained experimental results. The barrier properties of the multilayer films were also evaluated by characterizing the Water vapour, Oxygen (O2), and Carbon dioxide (CO2) permeability as well as the water vapour sorption. A 5-bilayer (OMMT/PE) coating (∼14 µm thick) reduced the O2 permeability of a 160 µm-thick PE film by 84.4% and the CO2 permeability by 70%, while the WVP was reduced by 45%. These permeability reductions obtained by only 2.4 v/v % of nanoclay addition level were found to be significantly greater compared to the reduction values reported in the literature for prepared blend PE/organoclay nanocomposites. This knowledge can be used in the establishment of an approach to produce stratified micro/nanostructures with tailored barrier properties for food packaging application

La maîtrise des interactions aliment/emballage est essentielle pour assurer la sécurité et la qualité des produits emballés. Dans le cadre du Projet Européen Novel Q, nous avons évalué l'impact des traitements de hautes pressions thermales (HP/T) sur les interactions aliment emballage. En particulier, nous avons étudié l'effet d'une pasteurisation (800 MPa, 5 min, 40°C) et une stérilisation (800 MPa, 5 min, 115°C) haute pression sur la migration et le scalping du polyéthylène linéaire de basse densité (LLDPE), du polylactate (PLA) et d'un nanocomposite biodégradable à base de gluten de blé/montmorillonite (WG/MMT). Pour LLDPE et PLA, la caractérisation de la migration s'est basée dans le suivi de deux additifs modèles, Uvitex OB et Irganox 1076 alors que pour le WG/MMT d'autres tests additionnels ont été faits, i. E. Migration globale, des protéines et de nanoparticules. Les traitements HP/T n'ont pas eu un effet significatif sur la plupart d'interactions étudiées sauf pour la migration de nanoparticules du WG et lors du scalping à haute température. Jusqu'à présent, les méthodes le plus fréquemment utilisées pour la détermination de niveaux de migration sont basées dans la destruction et quantification de l'échantillon, s'avérant de méthodes longues et coûteuses. Pour s'affranchir de telles méthodes, la modélisation a été récemment acceptée en tant que méthode d'estimation de migration. Néanmoins, les paramètres nécessaires, c'est-à-dire, la diffusivité et le coefficient de partage ne sont que rarement connus. L'utilisation de la spectroscopie Raman et FTIR pour déterminer des niveaux de migration et surtout, pour estimer la diffusivité d'un additif dans du LLDPE s'est accomplie avec succès, permettant une caractérisation complète du transfert de matière dans le système
The control of food/packaging interactions is essential to ensure the safety and quality of packed products. In particular, in the framework of the European Project Novel Q (IP6, Novel Processing Methods for the Production and Distribution of High Quality and Safe Foods), the effect of high pressure thermal (HP/T) treatments on food/packaging interactions was assessed in a variety of cases. Migration and scalping were studied for linear low density polyethylene (LLDPE), polylactide (PLA) and a wheat gluten/montmorillonite (WG/MMT) nanocomposite novel biodegradable and nanocomposite materials in food simulating liquids (FSL). Food/packaging interactions were studied after two HP/T treatments intended to perform a pasteurization (800 MPa, 5 min, 40°C) and a sterilization (800 MPa, 5 min, 115°C) treatment, as well as subsequent storage for 10 days. Specific migration of an additive (Uvitex OB) was assessed for LLDPE and PLA, whereas additional tests were carried out for WG/MMT, i. E. Overall migration, protein migration and nanoparticles migration. HP/T treatments did not significantly modify the migration or scalping in the conditions studied except for the release of nanoparticles from WG. Interestingly, the increase in the melting point of LLDPE during HP/T made possible to sterilize it. To date the most frequently used methods in migration assessment are based in time consuming methods based on destruction and quantification. To avoid them, modeling has been recently approved as a method for migration assessment. However, the parameters needed, i. E. Diffusivity (D) and the partition coefficient (K) are seldom available. The use of FTIR and Raman spectroscopy to assess migration behavior and, more importantly, to determine the diffusivity of an additive in LLDPE was successfully carried out allowing a complete characterization of mass transfer

Se desarrollaron películas biodegradables activas a base de PHBV, combinadas con otros biopolímeros (PLA y almidón) y diferentes compuestos antimicrobianos (aceites esenciales (AE)), las cuales se caracterizaron en cuanto a sus propiedades funcionales y estructurales a fin de obtener materiales que satisfagan mejor los requisitos de envasado de alimentos. La plastificación del PHBV se llevó a cabo mediante el uso de diferentes compuestos con el objetivo de mejorar el rendimiento mecánico de los films. Asimismo, se incorporaron diferentes activos (AE de orégano y clavo, así como sus respectivos compuestos mayoritarios, carvacrol (CA) y eugenol (EU)) en películas bicapa de PHBV pulverizando los activos entre dos monocapas obtenidas por termocompresión. También se analizó la potencial sinergia entre diferentes compuestos de AE, así como sus aplicaciones a diferentes alimentos cuando se incorporan en películas bicapa de PHBV. Se desarrollaron películas antimicrobianas multicapa donde se combinaron láminas polares (almidón), apolares (poliéster) y CA, ya sea pulverizado entre ambas capas o incorporado en la solución filmogénica de poliésteres, a fin de optimizar la funcionalidad del material. El proceso de valorización de la cascarilla de arroz, basado en extracción con agua subcrítica, permitió obtener xilanos bioactivos y fracciones celulósicas con potenciales aplicaciones en el envasado de alimentos. Pese a que la adición de polietilenglicol (PEG) de diferente peso molecular o ácido láurico disminuyó significativamente la rigidez y la resistencia de las películas de PHBV, solo el PEG1000 dio lugar a películas más extensibles. No obstante, estrategias adicionales fueron necesarias a fin de adaptar las propiedades mecánicas de los films de PHBV a ciertos requisitos de envasado. La pulverización de activos en la interfaz de ambas monocapas de PHBV generó películas antimicrobianas con propiedades físicas adecuadas. Además, la liberación de los activos desde las películas permitió controlar el crecimiento de Escherichia coli y Listeria innocua en condiciones in vitro. Ambos activos, CA y EU, se liberaron de manera efectiva en diferentes simulantes alimentarios. En este sentido, la tasa de liberación mejoró cuando disminuyó la polaridad de los simulantes. El efecto sinérgico más notable para los compuestos de AE se observó para las mezclas CA/cinnamaldehído para ambas bacterias, pero usando diferentes proporciones de compuestos. De esta forma, los resultados obtenidos permitieron la optimización de la dosis de activos utilizados para la aplicación de alimentos, minimizando así su impacto sensorial. Las películas de PHBV con compuestos activos de AE fueron altamente efectivas contra L. innocua y E. coli in vitro, pero mucho menos activas en alimentos. Asimismo, no se observó ninguna correlación entre la cantidad de activo migrada al alimento y el efecto antibacteriano en las diferentes matrices, lo que refleja que existen numerosos factores composicionales que afectan a la disponibilidad de los activos a la hora de ejercer su acción antibacteriana sobre un alimento determinado. La formulación 75:25 PLA-PHBV con PEG1000 exhibió las mejores propiedades físicas y, por lo tanto, se utilizó como soporte del CA mediante casting, así como para desarrollar bicapas con almidón. La incorporación de CA pulverizarlo entre las láminas de poliéster y almidón no fue eficaz a la hora de retener el compuesto activo en las bicapas. Sin embargo, la incorporación de CA en películas de poliésteres mediante casting dio lugar a una retención de CA prácticamente total, lo que condujo a una notable actividad antimicrobiana. Además, estas bicapas exhibieron propiedades físicas altamente mejoradas con respecto a la monocapa de almidón. La valorización de la cáscara de arroz mediante extracción con agua subcrítica, permitió obtener hemicelulosas mejor conservadas, con actividad antioxi
Biodegradable active films based on PHBV, combined with other biopolymers (PLA and starch) and different antimicrobial compounds (essential oils (EO)), were developed and characterized as to their functional and structural properties to obtain materials that better meet food packaging requirements. Plasticization of PHBV was analysed by using different compounds to enhance the PHBV mechanical performance. Likewise, different active compounds (oregano and clove EO, as well as their respective main compounds, carvacrol (CA) and eugenol (EU)) were incorporated into PHBV bilayer films by spraying the actives between two thermo-compressed monolayers. The potential synergy between different EO compounds and their applications to different food when incorporated into PHBV films was also analysed. Multilayer antimicrobial films combining polar (starch) and non-polar (polyester) sheets, incorporating CA, either by spraying it between both layers or incorporating it in the polyester casting solution, were developed to optimise the material functionality. Bioactive xylans and cellulosic fractions from rice husk, which are useful for food packaging applications, were obtained by using an eco-friendlier valorization process based on subcritical water extraction. Although the addition of polyethylene glycol (PEG) of different molecular weight and lauric acid significantly decreased the stiffness and the resistance to break of PHBV films, only PEG1000 yielded more extensible films. Nonetheless, additional strategies would be required to adapt PHBV mechanical properties to certain packaging requirements. Spraying actives at the interface of both PHBV monolayers produced antimicrobial films with appropriate physical properties. The release of the actives from the films was adequate to control the growth of E. coli and L. innocua in vitro. Both actives, CA and EU were effectively released into different food simulants. The release rate was enhanced when the polarity of the simulants decreased, but it fell markedly in fatty systems. The most remarkable synergistic effect for the EO compounds was observed for CA/cinnamaldehyde blends for both bacteria but using different compound ratios. Thus, the results allowed for the optimization of the dose of actives used for food application, thus minimizing their sensory impact. PHBV films with active EO compounds were highly effective against L. innocua and E. coli in the in vitro tests, but they were much less effective in foods. Likewise, no correlation between the amount of active that migrated to the food and the antibacterial effect was observed, which reflected that many compositional factors affect the availability of the antimicrobials to exert their action on a specific food. The 75:25 PLA-PHBV formulation with PEG1000 exhibited the best properties in terms of physical properties and, thus it was used to be the carrier of CA by casting and to develop bilayers with starch. Incorporating CA by spraying it between the polyester and starch sheets was not effective at retaining this active in the bilayers. However, the incorporation of CA into casted polyester films was highly effective at providing practically total CA retention, which led to a notable antimicrobial activity. Moreover, these bilayers exhibited highly improved tensile and water vapour barrier capacity with respect to the starch monolayer. The rice husk valorization, based on subcritical water extraction, allowed for obtaining better preserved hemicelluloses, with antioxidant and antibacterial activity, useful as additives for food or food packaging applications, and cellulosic reinforcing agents to develop biocomposites with enhanced mechanical performance.
Es van desenvolupar pel·lícules biodegradables actives a base de PHBV, combinades amb altres biopolímers (PLA i midó) i diferents compostos antimicrobians (olis essencials (OE)), les quals es van caracteritzar quant a les seues propietats funcionals i estructurals a fi d'obtindre materials que complisquen millor els requisits d'envasament d'aliments. La plastificació del PHBV es va dur a terme per mitjà de diferents compostos amb l'objectiu de millorar el rendiment mecànic dels films. Així mateix, es van incorporar diferents actius (OE d'orenga i clau, així com els seus respectius compostos majoritaris, carvacrol (CA) i eugenol (EU)) en pel·lícules bicapa de PHBV polvoritzant els actius entre dos monocapas, obtingudes per termocompressió. També es va analitzar la potencial sinergia entre diferents compostos d'OE, així com les seues aplicacions a diferents aliments quan s'incorporen en pel·lícules bicapa de PHBV. Es van desenvolupar pel·lícules antimicrobianes multicapa on es combinaren làmines polars (midó) i apolars (polièsters) i carvacrol, ja siga polvoritzat entre ambdós capes o incorporat en la solució filmogénica de polièsters, a fi d'optimitzar la funcionalitat del material. El procés de valoració de la corfeta d'arròs, basat en extracció amb aigua subcrítica, va permetre obtindre xilans bioactius i fraccions cel·lulòsiques amb potencials aplicacions en l'envasament d'aliments. A pesar que l'addició de polietilenglicol (PEG) de diferent pes molecular o àcid làuric va disminuir significativament la rigidesa i la resistència de les pel·lícules de PHBV, només PEG1000 va donar lloc a pel·lícules més extensibles. No obstant això, estratègies addicionals varen ser necessàries a fi d'adaptar les propietats mecàniques dels films de PHBV a certs requisits d'envasament. La polvorització d'actius a la interfase d'ambdós monocapes de PHBV va generar pel·lícules antimicrobianes amb propietats físiques adequades. L'alliberament dels actius des de les pel·lícules va permetre controlar el creixement d'Escherichia coli i Listeria innocua en assajos in vitro. Ambdós actius, CA i EU, es van alliberar de manera efectiva en els diferents simulantes alimentaris. La taxa d'alliberament va millorar quan va disminuir la polaritat dels sistemes aquosos. L'efecte sinèrgic més notable per als compostos d'OE es va observar per a les mescles de CA/cinnamaldehído per a ambdós bacteris, però utilitzant diferents proporcions. D'esta manera, els resultats van permetre l'optimització de la dosi d'actius utilitzats per a l'aplicació en aliments, minimitzant així el seu impacte sensorial. Les pel·lícules de PHBV amb actius d'OE van ser altament efectives front L. innocua i E. coli en les proves in vitro, però van ser molt menys efectives en aliments. Així mateix, no es va observar cap correlació entre la quantitat d'actiu migrada a l'aliment i l'efecte antibacterià en les diferents matrius, la qual cosa reflectix que hi ha molts factors composicionals que afecten la efectivitat del dels compostos actius per a exercir la seua acció sobre un aliment en concret. La formulació 75:25 PLA-PHBV amb PEG1000 va exhibir les millors propietats físiques i, per tant, es va utilitzar com a suport del CA per mitjà de càsting, així com per a desenvolupar bicapes amb midó. La incorporació de CA polvoritzat entre les làmines de polièsters i midó no va ser eficaç per a retindre el compost actiu en la bicapa. No obstan, la incorporació de CA en pel·lícules de polièster per càsting va permetre una retenció de CA pràcticament total, la que va conduir a una notable activitat antimicrobiana. A més, estes bicapas van exhibir una capacitat de barrera al vapor d'aigua i a la tracció altament millorades respecte a la monocapa de midó. La valoració de la corfa d'arròs, basada en l'extracció amb aigua subcrítica, va permetre obtindre fraccions hemicelulósiques millor conservades, amb activ
Requena Peris, R. (2018). Multilayer biodegradable active films based on PHBV for food packaging [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/110079
TESIS

This report focuses on the study of nanomaterials as a packaging material for the food industries. Reviews were carried out and the various properties exhibited by various nanomaterial used in the packaging industry were looked into. An investigation was also done on carbon nanotubes which are used to a large extent as reinforcing materials in the development of new class of nanocomposites. This report also traces the cause of sustainability problems associated with the use of nanomaterials in the food packaging industry. It analyzes and extrapolates the prospect of additional capabilities that human may gain from the development of nanomaterial in the food industry in order to ascertain environmental sustainability.
Kungsmarksvagen 71 Room 1329, 371 44, karlskrona,Sweden. Tel No: +46-737154801

Industrial applications of computer vision often utilize traditional image processing techniques whereas state-of-the-art methods in most image processing challenges are almost exclusively based on convolutional neural networks (CNNs). Thus there is a large potential for improving the performance of many machine vision applications by incorporating CNNs. One such application is the classification of juice boxes with straws, where the baseline solution uses classical image processing techniques on depth images to reject or accept juice boxes. This thesis aim to investigate how CNNs perform on the task of semantic segmentation (pixel-wise classification) of said images and if the result can be used to increase classification performance. A drawback of CNNs is that they usually require large amounts of labelled data for training to be able to generalize and learn anything useful. As labelled data is hard to come by, two ways to get cheap data are investigated, one being synthetic data generation and the other being automatic labelling using the baseline solution. The implemented network performs well on semantic segmentation, even when trained on synthetic data only, though the performance increases with the ratio of real (automatically labelled) to synthetic images. The classification task is very sensitive to small errors in semantic segmentation and the results are therefore not as good as the baseline solution. It is suspected that the drop in performance between validation and test data is due to a domain shift between the data sets, e.g. variations in data collection and straw and box type, and fine-tuning to the target domain could definitely increase performance. When trained on synthetic data the domain shift is even larger and the performance on classification is next to useless. It is likely that the results could be improved by using more advanced data generation, e.g. a generative adversarial network (GAN), or more rigorous modelling of the data.

Made available in DSpace on 2014-10-09T12:50:08Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:02:41Z (GMT). No. of bitstreams: 1 10561.pdf: 1935545 bytes, checksum: bb12d76fceb74dae301ec8a8ff27eec8 (MD5)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Flexible packaging is a growing successful market and the majority of flexible package applications are for the food industry. The demand for process optimization and reduced production costs, has led to an increase in flexible packaging. However, fast production lines can result in contamination in the seal area. For flexible food packaging, contamination is considered any food particle or substance trapped in the seal area. Current quality control processes can detect contamination in the seal area, but it is not determined if seal contamination effects seal quality. Oil-based and sodium based snack foods are two common categories that can be packaged on a horizontal flow film and seal (HFFS) flow-wrap machine. The study uses vegetable oil and a salt water solution to simulate the effect of liquid contamination along the T-point of flexible pouches made on an HFFS. The T-point refers to where the fin seal meets the end seal and requires the seal jaw to seal through four layers of film, which is the most difficult point to seal. The study tests a combination of different sealing temperatures and dwell time to determine the optimal sealing condition for a hermetic seal. A quality hermetic seal provides an enclosed seal with no leaks due to successful polymer chain entanglement between the two sealant layers. The different test categories of the study are non-contaminated (control), salt water solution for salt based foods, and vegetable oil for oil-based foods. Given the test parameters of the study, 140⁰C sealing temperature and 0.3 seconds dwell time are considered to be the optimal sealing condition for all three test categories. For Phase 1 of the study, salt water has a lower hermeticity pass rate compared to vegetable oil and non-contaminated seals. In addition, the effect of refrigerated storage temperature and ambient storage temperature did not show to be significant for any of the test categories. However, refrigerated conditions showed a higher hermeticity pass rate, but it was not statistically different. The findings for seal strength indicated no test category had higher or lower seal strength over the 14 day test period. Overall, the study shows there is no effect of liquid contaminant on hermeticity and seal strength for flexible film with LLDPE sealant layer.

Packaging for food products has impacts on the environment. In particular, single-use packaging have been criticized for the environmental and social impact created along recycling supply-chains in Asia. As a result, reusable packaging for food products started to reappear in Europe. This paper evaluates the environmental impacts of reusable packaging for Unwrapped’s business model using the organisational lifecycle assessment framework. The overall impacts of the organisation and hotspots of reusable packa ging are identified and compared with a reference retail activity using single-use packaging. The upstream processes of production of food products resulted in being the most significant impacts. However, reusable packaging performed worse and better than single-use packaging depending on the number of uses. The identified improvements for reusable packaging materials are proposed by increasing the number of uses. Changes in the upstream mode of transportation are other adopted improvement options for Unwra pped’s business model. The organisational lifecycle assessment framework highlighted issues in the current supply chain system that affect the niche business model in achieving the positive environmental benefits of reusable packaging. However, the reusable packaging business model shows promising aspects in a move towards sustainable businesses.
Matförpackningar påverkar miljön. Särskilt blev engångsförpackningar kritiserad för dessa miljö och sociala påverkan i återvinningsbranschen i Asien. och möjligheter. Återanvändbara förpackningar reintroducerades till marknaden i Europa. Den här avhandlingen kommer att granska och diskutera användning av återvinningsbara förpackningar i Unwrappeds affärsmodell med hjälp av organisationens livscykelanalys. Unwrappeds miljöpåverkan fastställs och jämförs med liknande affärsmodeller för engångsförpackning. Matproduktion innan förpackningen har den mest betydande påverkan. Återvinningsbara förpackningar visade sig vara bättre eller sämre beroende på antal gånger dem används. De fastställda förbättringarna för återanvändbara förpackningsmaterial är att återanvända dem så många gånger som möjligt. Förändringar i transportering är en annan förbättringsalternativ för Unwrappeds affärsmodell. Ramen för organisationens livscykelanalys påpekade problemen i nuvarande försörjningskedjans system som påverkar nischverksamhet för att uppnå miljövänligare återvinnin gsbara förpackningar. Dock, återvinningsbara förpackningars affärsmodeller visar lovande perspektiv på steg mot hållbara affären.

This thesis focuses upon fictitious people as food brand icons and their role and visual representation in contemporary international food packaging. It presents a new lens that focuses upon the visual reading of examples. Through comparative analysis of historical and contemporary British, Canadian and American examples primarily, ones that share comparable roles and visual characteristics, the study considers its hypothesis: a common visual formula operates across time and cultures in the creation and enduring omnipresence of icons that appear as real. It considers how shared visual codes provide identification of types and through such it presents a taxonomy of fictitious brand icons based upon their visual identity. The thesis considers, in relation to notions of storytelling, how examples read and are understood as real upon packaging and within wider commercial, social and cultural contexts. It considers how they relate to real people and roles through specific consideration of female home economist/ consumer advisor examples. The thesis focuses upon the American food brand icon Betty Crocker to consider how she may be understood as symbolic of a host of enigmatic examples. The thesis advances the study of packaging, branding, culinary history and design history through its original focus and methodological approach which evidently have been neglected previously in academic study. It braids interdisciplinary perspectives to present an original understanding of brand icons and packaging. It determines brand icon as key term; to address the need for a clear definition and understanding . The study's visual reading and taxonomy present an original framework that assert that visual codes create complex commercial and cultural fictitious personalities that can be deliberately elusive yet often appear as real. In particular, its interrogation of specific fictitious brand icons as enigmatic commercial home economists/consumer advisors confirms the existence of a commercial sisterhood; clone-types that appear to replicate their roles and appearance via visual codes that endure and appeal.

Thesis (MScFoodSc)--Stellenbosch University, 2014.
ENGLISH ABSTRACT: Fresh ready-to-cook fish fillets are prone to rapid loss of freshness and other quality attributes, as well as accelerated growth of spoilage micro-organisms under sub-optimal storage conditions. Cape hake (Merluccius capensis) is an important seafood in South Africa; however, rapid loss of quality and eventual spoilage is a problem limiting the economic potential. Thus, the aim of this study was to investigate the effects of active (40% CO2 + 30% O2 + 30% N2) and passive (0.039% CO2 + 20.95% O2 + 78% N2) modified atmosphere packaging (MAP) under different storage temperatures (0°C, 4°C, and 8°C) on the quality attributes of Cape hake (Merluccius capensis) fish fillets. This was achieved by investigating the effects of MAP (with or without absorbent pads) and storage temperature on quality attributes (microbial, physicochemical and sensory), changes in composition and concentration of volatile compounds (VOCs) and shelf life of Cape hake fillets. Modified atmosphere packaging, storage temperature and the use of absorbent pads had a significant (p < 0.05) impacts on physicochemical properties of Cape hake fillets during refrigerated storage. Highest storage temperature (8°C) led to accelerated deterioration of packaged Cape hake fillets. Generally, active MAP better maintained the quality attributes of Cape hake than passive MAP at 0°C and 4°C. Headspace gas composition of O2 and CO2 were significantly influenced by the storage time, temperature, MAP conditions and their interactions (p < 0.05). Irrespective of storage temperature, active-MA packaged fillets had lower pH values in comparison to fillets stored under passive-MAP. Drip loss was higher in active-MA fillets packaged without absorbent pad. Passive-MAP fillets did not show any drip loss. Absorbent pad was used to add value to MAP storage as MAP resulted in drip. The use of absorbent pad combined with low storage temperature maintained the firmness of hake fillets, across all temperatures. The interaction of MAP, absorbent pad and storage temperature had a significant effect on the aerobic mesophillic bacteria counts. Based on the aerobic mesophillic bacteria count fillets stored under active-MAP at 0°C (5.2 log cfu/g) was limited to day 12, while the fillet stored under passive-MAP at 0°C (log cfu/g) was limited to greater than day 3. Overall sensory acceptability of fillets decreased with increase in storage temperature across all treatments. Additionally, MAP had a significant (p < 0.05) impact on sensory attributes such as appearance and odour acceptability, with active-MA packaged fillets stored at 0°C having highest overall acceptability. A total of 16 volatiles were identified in Cape hake fillets, including 4 primary VOCs and 12 secondary VOCs. The VOCs associated with spoilage include tri-methylamine (TMA) (ammonia like), esters (sickeningly sweet) and sulphur group (putrid). MAP had a significant (p< 0.05) influence on volatile composition and concentration. Active-MA packaged fillets performed better during storage and had lower TMA value of 0.85% on day 12 in comparison with 7.22% under passive-MAP on day 6 at 0°C. The results obtained demonstrated that changes in volatile compounds were significantly (p< 0.05) influenced by storage duration, temperature and MAP. The development of high levels of VOCs and off-odour corresponded with high aerobic mesophillic bacteria count (≥ 5.5 log cfu/g). Based on these developments the storage life of Cape hake fillets packaged under active-MAP with absorbent pad and stored at 0°C was limited to 12 d, while the passive-MAP (control) fillets stored at 0°C was limited to 3 d. The use of active-MAP, in combination with absorbent pads and 0°C storage in addition to good hygienic practices, was effective in maintaining the postharvest quality of Cape hake fish fillets and led to higher shelf life.
AFRIKAANSE OPSOMMING: Vars, gereed-vir-kook vis filette is geneig om gou hulle varsheid en ander gehalte kenmerke te verloor en die vervoegde groei van mikro-organismes wat bederf tydens stoor veroorsaak, vind plaas. Kaapse stokvis (Merluccius capensis) is in Suid-Afrika ‘n gewilde seekos maar die ekonomiese potensiaal daarvan word deur die feit dat dit so gou in gehalte afneem en bederf, beperk. Dus word daar met hierdie studie gepoog om die effek van aktiewe (40% CO2 + 30% O2 + 30% N2) en passiewe (0.039% CO2 + 20.95% O2 + 78% N2) aangepasde verpakking (MAP) onder verskillende stoortemperature (0°C, 4°C, en 8°C) op die gehalte kenmerke van Kaapse stokvis (Merluccius capensis) filette te ondersoek. Dit is gedoen deur om die effek van MAP (met of sonder kussinkies) en stoortemperatuur op die gehalte kenmerke (mikrobies, fisiochemies en sensories) asook veranderinge in komposisie en konsentrasie van vlugtige samestellings (VOCs) en die raklewe van Kaapse stokvis filette te ondersoek. Aangepasde atmosfeer verpakking, stoortemperatuur en die gebruik van absorberende kussinkies het ‘n groot impak (p < 0.05) op die fisiochemiese kenmerke van Kaapse stokvis tydens stoor in yskaste gehad. Hoë stoortemperature (8°C) het aanleiding gegee tot die vinnige bederf van verpakte Kaapse stokvis filette. Oor die algemeen het aktiewe MAP die gehalte van die Kaapse stokvis filette teen 0°C and 4°C beter bewaar. Die komposisie van O2 en CO2 is heelwat deur stoortyd, temperatuur, MA toestande en die interaksies tussen bogenoemde, beïnvloed (p< 0.05). By alle temperature het aktiewe MA verpakte filette laer pH waardes getoon in vergeleke met filette wat in onder passiewe MA verpak is. Die drupverlies was hoër in aktiewe MA filette verpak sonder absorberende kussinkies. Passiewe MAP filette het nie enige drupverlies getoon nie. Absorberende kussinkies is gebruik om waarde by te voeg tot MAP stoor aaangesien MAP gelei het tot drup. By alle temperature het die gebruik van absorberende kussinkies tesame met lae stoortemperature bygedra tot die behoud van fermheid. Die interaksie van MAP, absorberende kussinkies, en stoortemperatuur het ‘n groot effek gehad op die aerobiese mesofiliese bakterië telling. Weens die aerobiese mesofiliese bakterië telling is stoor van filette onder aktiewe MAP teen 0°C (5.2 log cfu/g) beperk tot dag 12, terwyl filette gestoor onder passiewe MAP teen 0°C ( log cfu/g) beperk is tot dag 3. Oor die algemeen het die sensoriese aanneemlikheid van filette sonder inasgneming van die behandeling, verklein met ‘n toename in stoortemperature. MAP het ook ‘n groot impak op die sensoriese kenmerke soos voorkoms, reuk, en aktiewe MA verpakte fillets gestoor teen 0°C is oor die algemeen die aanneemlikste. ‘n Totaal van 16 vlugtige substanse is in Kaapse stokvis identifiseer. Dit het vier primêre VOCs en 12 sekondêre VOCs ingesluit. Die VOCs wat met bederf assosieer word, sluit tri-metilamien (TMA) (soos ammoniak), esters (soet) en die swael groep (smetterig) in. MAP het ‘n groot (p < 0.05) invloed op die vlugtige komposisie en konsentrasie. Aktiewe MA verpakte filette het beter tydens stoor presteer en het ‘n laer TMA waarde van 0.85% op dag 12 gehad, in vergelyking met 7.22 % onder passiewe MAP op dag 6 teen 0°C. Die resultate toon dat veranderinge in vlugtige samestellings grootliks beïnvloed word (p < 0.05) deur stoortyd, temperature en MAP. Die ontwikkeling van hoë vlakke van VOCs, slegte reuke en verlies aan varsheid gaan tesame met hoë aerobiese mesofiliese bakterië telling (≥ 5.5 log cfu/g). Gegrond op hierdie tellings is die stoorleeftyd van Kaapse stokvis filette beperk tot dag 12, terwyl passiewe MAP (die kontrole) filette gestoor teen 0°C, beperk is tot dag 3. Om op te som, die gebruik van aktiewe MAP tesame met absorberende kussinkies en 0°C stoor asook goeie higiëniese praktyk, kon die na-oes gehalte van Kaapse stokvis filette behou en het gelei tot ‘n langer rakleeftyd.

Purpose: The purpose of this thesis is to investigate how food start-ups (FS) can make their primary food packaging (PFP) more eco-friendly by identifying and evaluating the performance of suited packaging alternative. The purpose was fulfilled by answering the three research questions:  RQ1) How to assess the eco-friendliness of PFP? RQ2) Which are areas of improvement in environmental performance? RQ3) What are the differences in performance across similar PFP’s?  Methods: To answer the research questions both the literature review and empirical data was required. The literature study was conducted to gather relevant theories about primary food packaging in food start-ups. To get the required empirical data, a single case study was conducted at a case company that suited the subject. The case study consisted of multiple interviews and document study. This enabled for an analysis in the form of pattern matching in order to answer the research questions and achieve the purpose.  Findings: The Study found that to assess the PFP that have direct impact on the environment the functional features and the environmental framework play a central role in the eco- friendliness of PFPs which analyzed the requirements for the PFP and a multi criteria decision making approach for the environmental assessment for the Green-PE. The stakeholder expectations were found by analyzing the criterion for the PFP. In addition, a comparison for an eco-friendlier alternative was analyzed with the current Green-PE to justify the performance for the PFP in FS.  Implications: The study results present practical implications with assessing the current Green-PE and evaluating the gaps for improvement areas, while also comparing similar PFP which is an eco-friendlier option for food packaging start-ups. As there has been no general theoretical implications, the findings of the thesis can be used as a basis for deeper insights into the subject through more extensive research.  Delimitations & Scope: The focus was to identify and evaluate the current PFP environmental impact and not the other aspects of the life cycle assessment since the scope was limited. Also, a single case study was used rather than multiple case studies to analyze the eco-friendliness for PEPs.

Il mercato del food packaging è molto importante a livello mondiale e muove ogni anno centinaia di migliaia di dollari. La principale sfida che ci si pone è quella di creare un imballaggio a basso costo, che sia inerte nei confronti del prodotto alimentare, facilmente riciclabile e capace di preservare a lungo le caratteristiche organolettiche del prodotto in esso contenuto. A tal fine occorre prestare particolare attenzione all’impermeabilità del materiale nei confronti dell’ossigeno, in quanto l’ossidazione è tra le principali cause che portano il cibo ad alterazioni indesiderate di gusto, odore o aspetto. Per quanto riguarda i prodotti polimerici, la soluzione principalmente adottata e la più performante è la produzione di imballaggi multistrato, in cui uno dei componenti è un polimero ad elevata barriera all’ossigeno. Questi prodotti sono però abbastanza costosi se rapportati ai monostrato, oltre a impedire alcune scelte di design e sigillatura richieste dai consumatori. La miscelazione in matrici organiche semplici (polipropilene e polietilene) di additivi in grado di diminuirne la permeabilità ai gas potrebbe rappresentare la soluzione ideale nei casi in cui l’utilizzo del solo polimero non assicuri una conservazione abbastanza lunga al prodotto, ma utilizzare un multistrato risulterebbe troppo costoso e non necessario. A tal fine sono stati formati film di materiale polimerico contenenti additivi selezionati in base a costo, efficacia e food compliance. Alcuni additivi hanno migliorato in maniera sensibile l’impermeabilità della matrice nei confronti dell’ossigeno, portando a ipotizzare un ulteriore miglioramento di questo effetto una volta ottimizzato il processo. Studi futuri permetteranno di capire quanto questi materiali migliorino effettivamente la durata degli alimenti in essi contenuti, al fine di comprendere quanto essi possano, in futuro, diventare un’alternativa valida alle attuali soluzioni utilizzate nel settore.

Ce projet contribue à développer la prochaine génération de nano-emballages en utilisant une approche plus sûre et éco-conçue avec des avantages directs à la fois pour l'environnement et la sécurité des consommateurs. Les emballages alimentaires constituent l’un des principaux secteurs d’applications des nanotechnologies avec des enjeux environnementaux prometteurs de substitution des pétro-plastiques par des bio-plastiques et de réduction des pertes et gaspillages alimentaires grâce à des emballages plus performants, de type actifs et intelligents. Dans le cas de matériaux nano-composites (matrice polymérique contenant des nano-particules) destinés au contact alimentaire, le risque majeur en terme de santé humaine est lié à leur impact sur la migration de composés indésirables de l’emballage vers l’aliment (stabilisants UV, antioxydants, plastifiants, etc) qui peuvent avoir des effets néfastes en fonction des doses et durées d’exposition. Ces interactions contenant/contenu sont soumises à une réglementation européenne dont l’objectif est la protection de la santé du consommateur en fixant des limites de migration spécifique pour tous les composés supposés entrer dans la composition des matériaux plastiques dédiés au contact alimentaire. Dans le cas des nanomatériaux, la présence de nanoparticules est susceptible de modifier les interactions entre le polymère et les additifs et par voie de conséquence leurs propriétés de transfert. Ainsi, la formalisation des phénomènes de migration de l’emballage vers l’aliment établie sur des matériaux plastiques ne contenant pas de nanoparticules ne peut pas être directement transposée au nano-matériaux. De plus la présence de ces nanoparticules peut profondément modifier l’éco-toxicité environnementale du système matrice- nanoparticule -additif.La présente étude vise à comprendre et contrôler l’impact des structures nanocomposites (matrice polymérique contenant des nano-particules) sur les propriétés de transport (diffusivité et solubilité) des nanoparticules et des additifs chimiques en condition d’usage. À cet égard, il est nécessaire de combler le déficit de connaissances dans a caractérisation de la structure 3D, des propriétés physico-chimique et des interactions aux interfaces entre nanoparticules et matrice dans les nanomatériaux. Devant la complexité du système étudié, la modélisation est indispensable pour représenter (simplifier sans pour autant perdre trop de connaissances) la structure 3D des nanomatériaux et simuler, reproduire puis prédire, l’évolution de leurs propriétés de transfert en fonction des paramètres structurels et en condition d’usage. La modélisation des transferts est également indispensable pour, dans une approche d’ingénierie inverse, éco-concevoir et dimensionner à façon des nano-emballages sûrs pour l’Homme et l’Environnement. Dans cette optique une démarche de modélisation multi-échelle des relations structure/propriétés de transfert de masse a été mise en place sur des matériaux nanocomposites ciblés choisis pour leur pertinence dans le domaine de l’emballage alimentaire
The market of nanotechnologies is dominated by the food packaging area which amounts more than 20% of the total nanotechnologies market in 2015. However, the wide-scale use of nanomaterials raises important questions about environmental and safety issues that could hinder their development. In the case of plastics intended to be in contact with food, the risk of contamination concerns not only the nanoparticles but also all the chemical additives added during the material processing. The presence of nanoparticles is susceptible to modify the interactions between polymer and the additives with a possible change in their transport properties and therefore the food contamination.The present work aims at identifying the relationship between the structural characteristic and the transport properties (diffusivity and solubility) of nanoparticles and chemical additives incorporated in nanocomposites. In this regard, it is necessary to fill the gap of knowledge in 3D nanostructure characterization and a multi-scale modeling of mass transfer properties of nanocomposites in real usage conditions.In this way, polyethylene and nanoclay were selected based on the best compromise between real potential applications and the scientific knowledge previously published and eventually the nanocomposites were synthesized with LLDPE, Cloisite20 and a compatibilizer by melt intercalation method.The nanocomposite structure was characterized using TEM, X-ray nanotomography, TGA and XRD then submitted to migration tests undertaken in contact with different food simulants which represent various types of food (aqueous, acid, alcoholic) following the recommendation of the European regulation on the food contact material. To evaluate the positive or adverse effects of the nanomaterials on the contamination of the food by chemical additives which are usually incorporated with the plastic packaging, the virgin polymer and nanocomposite material were spiked with a mixture of the additives exhibiting various volatility, polarity and molecular weight. Then, the transport properties (i.e inertia) of nanocomposite structure was distinctively investigated on kinetic (apparent diffusion coefficient) and thermodynamic (partition coefficient) considerations.The results indicated that nanoclay addition in plastic materials favorably reduced the migration of additives by modifying both their diffusivity in the polymer and their partition between the polymer and the food simulant. However, while the partition coefficient of additives increases in nanocomposite in comparison to pure LLDPE for the samples in contact with all types of food simulants, the reduction of diffusion coefficient is significantly dependent on the nature of the food simulant in contact. Hence, it can be concluded that the major role in the migration of additives is not played by the imposed tortuosity path, but by the factors such as the affinity between the base polymer and simulants as well as the effects of simulants on swelling and crystallinity of the samples. Moreover, the effect of additive-related parameters and the structural parameters were assessed and put in perspective with their impact on the transport properties of nanostructures. Integrating the results of characterization and transfer properties led to an improved understanding of the influence of structure of nanocomposites on their mass transfer properties and therefore on the suitability of using them as food contact materials