To see the other types of publications on this topic, follow the link: Injection chamber.

Journal articles on the topic 'Injection chamber'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Injection chamber.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Fu, Yao, Liyan Feng, Hua Tian, Wuqiang Long, Dongsheng Dong, and Xianyin Leng. "Visualization Investigation of the Influence of Chamber Profile and Injection Parameters on Fuel Spray Spreading in a Double-Layer Diverging Combustion Chamber for a DI Diesel Engine." Energies 11, no. 9 (2018): 2343. http://dx.doi.org/10.3390/en11092343.

Full text
Abstract:
The double-layer diverging combustion chamber (DLDC chamber) aims to improve the fuel–air mixing formation and promote in-cylinder air utilization by changing fuel spray spreading characteristics. In order to investigate how the DLDC chamber profile and injection parameters affect the fuel spray spreading, visualization of fuel injection and impingement tests were carried out on two different DLDC chambers with different fuel injection parameters. The visualization test results showed that double-layer fuel spray spreading was obtained in the two DLDC chambers and the peripheral top clearance
APA, Harvard, Vancouver, ISO, and other styles
2

Ayintap, Emre, Uğurcan Keskin, Fariz Sadigov, et al. "The Injection of Air/Oxygen Bubble into the Anterior Chamber of Rabbits as a Treatment for Hyphema in Patients with Sickle Cell Disease." Journal of Ophthalmology 2014 (2014): 1–4. http://dx.doi.org/10.1155/2014/696302.

Full text
Abstract:
Purpose.To investigate the changes of partial oxygen pressure (PaO2) in aqueous humour after injecting air or oxygen bubble into the anterior chamber in sickle cell hyphema.Methods.Blood samples were taken from the same patient with sickle cell disease. Thirty-two rabbits were divided into 4 groups. In group 1 (n=8), there was no injection. Only blood injection constituted group 2 (n=8), both blood and air bubble injection constituted group 3 (n=8), and both blood and oxygen bubble injection constituted group 4 (n=8).Results.The PaO2in the aqueous humour after 10 hours from the injections was
APA, Harvard, Vancouver, ISO, and other styles
3

Vásquez, R. A., and F. S. Costa. "SPRAY CONE ANGLES GENERATED BY A DUAL CENTRIFUGAL INJECTOR." Revista de Engenharia Térmica 13, no. 1 (2014): 36. http://dx.doi.org/10.5380/reterm.v13i1.62067.

Full text
Abstract:
A dual pressure swirl injector is characterized by two independent concentric chambers which can provide independent rotational levels to a single liquid or two different liquids. This paper compares theoretical, semi-empirical and experimental results concerning the spray cone angles formed by injection of water, ethanol and biodiesel through a dual pressure swirl injector. Data are obtained for injection of the same liquid through the primary and secondary chambers and for injection of ethanol in the primary chamber and biodiesel through the secondary chamber of the injector. Experimental da
APA, Harvard, Vancouver, ISO, and other styles
4

Lo´pez, J., F. Faura, J. Herna´ndez, and P. Go´mez. "On the Critical Plunger Speed and Three-Dimensional Effects in High-Pressure Die Casting Injection Chambers." Journal of Manufacturing Science and Engineering 125, no. 3 (2003): 529–37. http://dx.doi.org/10.1115/1.1580525.

Full text
Abstract:
During the initial slow stage of the injection process in high-pressure die casting machines with horizontal cold chamber, a plunger pushes the molten metal which partially fills the injection chamber, causing the formation of a gravity wave. The evolution of the wave surface profile, which depends on the plunger acceleration law, may trap air in the molten metal, causing porosity when the metal solidifies. In this work, a one-dimensional shallow-water model, which is solved numerically using the method of characteristics, and a three-dimensional numerical model, based on a finite element form
APA, Harvard, Vancouver, ISO, and other styles
5

Serbin, Serhiy, Kateryna Burunsuz, and Daifen Chen. "Investigation of the Characteristics of a Gas Turbine Combustion Chamber with Steam Injection Operating on Hydrogen-Containing Mixtures and Hydrogen." International Journal of Chemical Engineering 2022 (December 17, 2022): 1–12. http://dx.doi.org/10.1155/2022/9123639.

Full text
Abstract:
The article is devoted to the investigation of the characteristics of a gas turbine combustion chamber with a steam injection when operating on hydrogen-containing mixtures and pure hydrogen. The parameters of a cannular combustion chamber with a separate injection of ecological and energy steam were studied to ensure the stable and ecologically clean chamber’s operation without the formation of flashback zones. The injection of ecological steam in the area of the vane swirler of the flame tube for the diffusion-type combustion chamber makes it possible to provide low emissions of nitrogen oxi
APA, Harvard, Vancouver, ISO, and other styles
6

Cho, Jun Hee, Che Gyem Yae, Jin Young Kim, et al. "Effect of 0.625% Intravitreal Povidone-iodine injections in Patients with Endophthalmitis." Journal of the Korean Ophthalmological Society 65, no. 8 (2024): 550–54. http://dx.doi.org/10.3341/jkos.2024.65.8.550.

Full text
Abstract:
Purpose: We report on three patients who received 0.625% povidone-iodine (PVI) intravitreal injections to treat endophthalmitis that did not respond to conventional antibiotic treatment or were inoperable.Case summary: Case 1 was a 42-year-old female with suspected left-eye endophthalmitis that developed after anterior chamber irrigation to treat silicone oil emulsification. A 0.625% PVI intravitreal injection reduced inflammation of the anterior chamber and the vitreous. Case 2 was an 84-year-old male who was blind in the left eye due to glaucoma. He was diagnosed with endogenous endophthalmi
APA, Harvard, Vancouver, ISO, and other styles
7

Su, W. H., T. J. Lin, H. Zhao, and Y. Q. Pei. "Research and development of an advanced combustion system for the direct injection diesel engine." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 219, no. 2 (2005): 241–52. http://dx.doi.org/10.1243/095440705x6604.

Full text
Abstract:
In order to obtain a simultaneous reduction in both NOx and particulate emissions from a direct injection (DI) diesel engine, an advanced combustion system has been researched and developed in the authors' laboratory. The new combustion system comprises homogeneous charge compression ignition (HCCI) combustion at low load by early and multiple injections, combined HCCI, and lean diffusion burning at medium and higher load conditions by means of a novel combustion chamber design and multiple injections. In this paper, the research and development of the enhanced mixing by means of a raised roun
APA, Harvard, Vancouver, ISO, and other styles
8

Hill, Philip G., and Patric Ouellette. "Transient Turbulent Gaseous Fuel Jets for Diesel Engines." Journal of Fluids Engineering 121, no. 1 (1999): 93–101. http://dx.doi.org/10.1115/1.2822018.

Full text
Abstract:
Existing data on transient turbulent jet injection in to large chambers demonstrates self-similar behavior under a wide range of conditions including compressibility, thermal and species diffusion, and nozzle under expansion. The Jet penetration distance well downstream of the virtual origin is proportional to the square root of the time and the fourth root of the ratio of nozzle exit momentum flow rate to chamber density. The constant of proportionality has been evaluated by invoking the concept of Turner that the flow can be modeled as a steady jet headed by a spherical vortex. Using incompr
APA, Harvard, Vancouver, ISO, and other styles
9

Bakhtiari, Elham, Majid Abrishami, Vahideh Nouzari, Faezeh Saffari, and Rahim Saffari. "Anterior segment changes in nonproliferative diabetic patient with macular edema treated by intravitreous bevacizumab injection." Medicine 104, no. 18 (2025): e41994. https://doi.org/10.1097/md.0000000000041994.

Full text
Abstract:
Currently, intravitreal bevacizumab is widely used for patients with intraocular neovascular disorders and macular edema. There are few studies about the effects of bevacizumab on anterior segment parameters and human cornea. The aim of this study was to evaluate the effects of intravitreal injection of bevacizumab on anterior chamber and central corneal thickness (CCT) during 3 months follow-up, using anterior segment optical coherence tomography. This longitudinal study was included 40 eyes of 20 patients. Patients received an intravitreal injection of 1.25 mg/0.05 mL bevacizumab. Anterior s
APA, Harvard, Vancouver, ISO, and other styles
10

Eski, Mehmet, Kuddusi Teberik, and Taha Sezer. "Comparison of the effects of 3 different anti-VEGF drugs on cornea thickness, lens thickness and anterior chamber depth." Medicine Science | International Medical Journal 12, no. 1 (2023): 76. http://dx.doi.org/10.5455/medscience.2023.01.02.

Full text
Abstract:
To compare the long-term effects of 3 different anti-VEGF molecules on the lens, cornea and anterior chamber in phakic patients who have received consecutive intravitreal injections. 157 patients who did not have corneal pathology but were treated with 1.25mg/0.05ml intravitreal bevacizumab, 0.5mg/0.5ml ranibizumab or 2mg/0.05ml aflibercept injections due to diabetic macular edema were retrospectively analyzed in our clinic. Patients who received three consecutive monthly injections were included to the study. Corneal thickness, lens thickness and anterior chamber depth measurements which were
APA, Harvard, Vancouver, ISO, and other styles
11

Arumugam, Sozhi, Pitchandi Kasivisvanathan, M. Arventh, and P. Maheshkumar. "Effect of Re-Entrant and Toroidal Combustion Chambers in a DICI Engine." Applied Mechanics and Materials 787 (August 2015): 722–26. http://dx.doi.org/10.4028/www.scientific.net/amm.787.722.

Full text
Abstract:
This paper presents the experimental work to investigate the effect of Re-entrant and Toroidal combustion chambers in a DICI Engine. The two combustion chambers namely Re-entrant combustion chamber (RCC) and Toroidal combustion chamber (TCC) were fitted in a 4.4 kW single cylinder Direct Injection Compression Ignition (DICI) engine and tests were conducted with diesel. The influences of the combustion chamber geometry characteristics on combustion, performance and emissions characteristics have been investigated. This investigation shows the peak pressure of re-entrant chamber is higher than t
APA, Harvard, Vancouver, ISO, and other styles
12

Doppalapudi, Arun Teja, Abul Kalam Azad, and Mohammad Masud Kamal Khan. "Analysis of Improved In-Cylinder Combustion Characteristics with Chamber Modifications of the Diesel Engine." Energies 16, no. 6 (2023): 2586. http://dx.doi.org/10.3390/en16062586.

Full text
Abstract:
This study numerically analyses the effects of chamber modifications to investigate the improvement of in-cylinder combustion characteristics of the diesel engine using a computational fluid dynamics (CFD) approach. Five different modified chambers, namely, the double swirl combustion chamber (DSCC), bathtub combustion chamber (BTCC), double toroidal re-entrant combustion chamber (DTRCC), shallow depth combustion chamber (SCC), and stepped bowl combustion chamber (SBCC) were developed and compared with a reference flat combustion chamber (FCC). The effects of chamber modifications on temperatu
APA, Harvard, Vancouver, ISO, and other styles
13

Lin, Yuh-Yih, Jan-Hung Huang, Yo-Yin Lai, Han-Ching Huang, and Suh-Woan Hu. "Tissue Destruction Induced by Porphyromonas gingivalis Infection in a Mouse Chamber Model Is Associated with Host Tumor Necrosis Factor Generation." Infection and Immunity 73, no. 12 (2005): 7946–52. http://dx.doi.org/10.1128/iai.73.12.7946-7952.2005.

Full text
Abstract:
ABSTRACT Intrachamber challenge with Porphyromonas gingivalis strain 381 in a mouse subcutaneous chamber model results in a local infection that progresses to exfoliation of the chambers within 15 days. This study was designed to elucidate the contribution of host reactions to tissue destruction manifested by chamber exfoliation in animals infected with P. gingivalis. Chamber fluids showed increasing levels of prostaglandin E2 with infection, and the levels of tumor necrosis factor (TNF) in chamber fluids peaked just before chamber exfoliation. Intraperitoneal injection of a TNF inhibitor, tha
APA, Harvard, Vancouver, ISO, and other styles
14

Doppalapudi, Arun Teja, and Abul Kalam Azad. "Advanced Numerical Analysis of In-Cylinder Combustion and NOx Formation Using Different Chamber Geometries." Fire 7, no. 2 (2024): 35. http://dx.doi.org/10.3390/fire7020035.

Full text
Abstract:
In diesel engines, emission formation inside the combustion chamber is a complex phenomenon. The combustion events inside the chamber occur in microseconds, affecting the overall engine performance and emissions characteristics. This study opted for using computational fluid dynamics (CFD) to investigate the combustion patterns and how these events affect nitrogen oxide (NOx) emissions. In this study, a diesel engine model with a flat combustion chamber (FCC) was developed for the simulation. The simulation result of the heat release rate (HRR) and cylinder pressure was validated with the expe
APA, Harvard, Vancouver, ISO, and other styles
15

Masuram, N. B., J. A. Roux, and A. L. Jeswani. "Pull Speed Influence on Fiber Compaction and Wetout in Tapered Resin Injection Pultrusion Manufacturing." Polymers and Polymer Composites 25, no. 6 (2017): 419–34. http://dx.doi.org/10.1177/096739111702500601.

Full text
Abstract:
In the resin injection pultrusion process (RIP), liquid resin is injected into the tapered injection chamber through the injection slots to completely wetout continuously pulled fibers. As the resin penetrates through the fibers, the resin also pushes the fibers away from the wall towards the centerline, causing compaction of the fiber reinforcements. The fibers are squeezed together due to compaction, making resin penetration more difficult; thus at low resin injection pressures, the resin cannot effectively penetrate through the fibers to achieve complete wetout. However, if the resin inject
APA, Harvard, Vancouver, ISO, and other styles
16

Rummel, Christoph, Stephan W. Barth, Thilo Voss, et al. "Localized vs. systemic inflammation in guinea pigs: a role for prostaglandins at distinct points of the fever induction pathways?" American Journal of Physiology-Regulatory, Integrative and Comparative Physiology 289, no. 2 (2005): R340—R347. http://dx.doi.org/10.1152/ajpregu.00104.2005.

Full text
Abstract:
In guinea pigs, dose-dependent febrile responses were induced by injection of a high (100 μg/kg) or a low (10 μg/kg) dose of bacterial lipopolysaccharide (LPS) into artificial subcutaneously implanted Teflon chambers. Both LPS doses further induced a pronounced formation of prostaglandin E2 (PGE2) at the site of localized subcutaneous inflammation. Administration of diclofenac, a nonselective cyclooxygenase (COX) inhibitor, at different doses (5, 50, 500, or 5,000 μg/kg) attenuated or abrogated LPS-induced fever and inhibited LPS-induced local PGE2 formation (5 or 500 μg/kg diclofenac). Even t
APA, Harvard, Vancouver, ISO, and other styles
17

TULWIN, Tytus, Mirosław WENDEKER, and Zbigniew CZYŻ. "The swirl ratio influence on combustion process and heat transfer in the opposed piston compression-ignition engine." Combustion Engines 170, no. 3 (2017): 3–7. http://dx.doi.org/10.19206/ce-2017-301.

Full text
Abstract:
In order to maximise engine heat efficiency an engines charge flow must be properly designed -especially its swirl and tumble ratio. A two-stroke compression-ignition opposed piston engine reacts to engine swirl differently compared to a standard automotive engine with axially symmetric combustion chamber. In order to facilitate direct fuel injection, high-pressure injectors must be positioned from the side of combustion chamber. Depending on the combustion chamber geometry the swirling gases impact greatly how the injection stream is formed. If the deformation is too high the high temperature
APA, Harvard, Vancouver, ISO, and other styles
18

Huang, Ko-Jung, Cheng-Han Li, Ping-Kun Tsai, et al. "Electromagnetic Force-Driven Needle-Free in Ovo Injection Device." Veterinary Sciences 9, no. 3 (2022): 147. http://dx.doi.org/10.3390/vetsci9030147.

Full text
Abstract:
Needle-free injections are mainly used for administering human or mammalian vaccines or drugs. However, poultry vaccines, in ovo injections to embryos, subcutaneous injections to chickens, and intramuscular injections are administered using needle injections. This article presents a new needle-free in ovo injection device method that uses push-pull solenoids to eject liquid jets, mainly for embryonic eggs of chickens. Furthermore, our study investigated the suitable jet pressures for using this method and the post-injection hatching rates in 18-day-old embryonic eggs. Using this method, we cou
APA, Harvard, Vancouver, ISO, and other styles
19

Fu, Jun, Yuan Tang, Wen Hua Yuan, Yi Ma, Wei Chen, and Guang Ming Li. "Research on the Angle of Swirl Chamber Diesel Engine with Dual Channel." Applied Mechanics and Materials 635-637 (September 2014): 598–602. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.598.

Full text
Abstract:
Swirl chamber diesel engine’s insert piece of channel performance has a great influence on the swirl chamber indoor airflow movement condition. So based on the 175F series bell flat bottom type swirl chamber’s single connection channel improvement, the influence law of swirl chamber indoor air movement during the injection time by the double connection channel angle at the engine rated speed 2600r/min was studied. Simplified boundary conditions to establish its mathematical solution model for the swirl chamber, then the fluid simulation software was used to research the original scheme and dou
APA, Harvard, Vancouver, ISO, and other styles
20

Balendra, R. "Injection-chamber to die-cavity interface for injection forming." International Journal of Machine Tools and Manufacture 33, no. 6 (1993): 753–60. http://dx.doi.org/10.1016/0890-6955(93)90035-s.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Yuan, Wen Hua, Yi Ma, Wu Qiang Long, Jun Fu, and Yu Mei Liu. "Structure of Swirl Chamber of Turbulent Combustion Diesel Engine." Applied Mechanics and Materials 448-453 (October 2013): 3408–12. http://dx.doi.org/10.4028/www.scientific.net/amm.448-453.3408.

Full text
Abstract:
Numerical simulation was conducted on three types of swirl chamber of turbulent combustion diesel engine, i.e. cone-shaped flat-bottomed, cylindrical flat-bottomed and spherical shape. The characteristics of flow field in cylinder were studied within the time range for the piston to move from BTDC 108°CA to BTDC 8°CA (at the instant of fuel injection), thus analyzed the changes of flow field in swirl chambers of such three different structures prior to fuel injection based on the velocity vector diagram at all times and the final temperature characteristic diagram of the flow field. The result
APA, Harvard, Vancouver, ISO, and other styles
22

Marchenko, L. A., and M. A. Safonov. "Determination of an Injection Sprayer's Technological Parameters." Agricultural Machinery and Technologies 12, no. 5 (2018): 31–38. http://dx.doi.org/10.22314/2073-7599-2018-12-5-31-38.

Full text
Abstract:
Agricultural boom sprayers are equipped with injection sprayers of mainly foreign origin. The main parameters of the injection sprayers shown in the catalogs display the consumption characteristics in cer­tain ranges without taking into account the design parameters.(Research purpose)Determination of the design and technological parameters of an injection sprayer for the introduction of pesticides.(Materials and methods)The injection sprayer belongs to the class of two­phase liquid­gas isothermal jet devices with the formation of an air­gas mixture at the outlet. It has been established that t
APA, Harvard, Vancouver, ISO, and other styles
23

Егорова, Юлия Левонтьевна, Георгий Владимирович Александров, and Рамиль Хабутдинович Низаев. "Analytic dependencies used to determine temperature profile resulting from injection of hot water and steam into reservoirs with underlying contact water zone." Нефтяная провинция, no. 4(32) (December 30, 2022): 140–55. http://dx.doi.org/10.25689/np.2022.4.140-155.

Full text
Abstract:
В статье по результатам проведённых по аналитической методике расчётов распределения температурного поля в залежи высоковязкой нефти с нижележащей контактной водоносной зоной, образующегося при закачке в пласт теплоносителя, получены аналитические зависимости для определения значений радиуса теплового фронта, образующегося в нефтеносной части залежи. На основании анализа полученных аналитических зависимостей установлено, что при закачке горячей воды в нижележащую контактную водоносную зону ниже отметки водонефтяного контакта радиус образующегося в нефтеносной части залежи теплового фронта боль
APA, Harvard, Vancouver, ISO, and other styles
24

Zhang, Jizhou, Fuwu Yan, and Yu Wang. "Combined effects of combustion chamber geometry and injection strategy on combustion and emissions of a diesel engine." E3S Web of Conferences 268 (2021): 01026. http://dx.doi.org/10.1051/e3sconf/202126801026.

Full text
Abstract:
For a certain type of direct injection diesel engine, a three-dimensional model of a single-cylinder complete combustion chamber and in-take/exhaust port was established. Three-dimensional Computational Fluid Dynamics (CFD) analysis software CONVERGE was used for simulation. The effects of fuel injection strategy and combustion chamber geometry on combustion emissions of diesel engine were studied while the combustion chamber volume, engine compression ratio, total fuel injection quantity and total injection duration were kept unchanged. The results show that the strategy of multiple injection
APA, Harvard, Vancouver, ISO, and other styles
25

Feng, Liyan, Jun Zhai, Chuang Qu, et al. "The influence of the enrichment injection angle on the performance of a pre-chamber spark ignition natural-gas engine." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 232, no. 5 (2017): 679–94. http://dx.doi.org/10.1177/0954407017705971.

Full text
Abstract:
Using an enriched pre-chamber is an effective way to extend the lean limit, to reduce the nitrogen oxide emissions and to avoid abnormal combustion in spark ignition natural-gas engines. Enrichment injection in the pre-chamber of a spark ignition natural-gas engine determines the flow field and the fuel–air mixture formation quality in the pre-chamber and has a profound influence on the combustion performance of the engine. In order to study the characteristics of enrichment injection in the pre-chamber of a natural-gas engine, two-dimensional particle image velocimetry measurements and three-
APA, Harvard, Vancouver, ISO, and other styles
26

Rajesh, T. N., T. J. S. Jothi, and T. Jayachandran. "Preliminary Studies on Non-Reactive Flow Vortex Cooling." Recent Patents on Mechanical Engineering 12, no. 3 (2019): 262–71. http://dx.doi.org/10.2174/2212797612666190510115403.

Full text
Abstract:
Background: The impulse for the propulsion of a rocket engine is obtained from the combustion of propellant mixture inside the combustion chamber and as the plume exhausts through a convergent- divergent nozzle. At stoichiometric ratio, the temperature inside the combustion chamber can be as high as 3500K. Thus, effective cooling of the thrust chamber becomes an essential criterion while designing a rocket engine. Objective: A new cooling method of thrust chambers was introduced by Chiaverni, which is termed as Vortex Combustion Cold-Wall Chamber (VCCW). The patent works on cyclone separators
APA, Harvard, Vancouver, ISO, and other styles
27

Lv, Qijun, Guo Yang, Yangbo Xie, et al. "Mechanism of High-Pressure Dilation of Steam-Assisted Gravity Drainage by Cyclic Multi-Agent Injection." Energies 17, no. 16 (2024): 3911. http://dx.doi.org/10.3390/en17163911.

Full text
Abstract:
The reservoir properties of super-heavy oil reservoirs in fluvial sedimentation are relatively poor, with high heterogeneity directly affecting the steam injection rate and expansion velocity of the steam chamber in the SAGD process. In order to significantly improve SAGD production performance, a combination of laboratory testing and physical simulation experiments was used to analyze the changes in reservoir-rock structure, rock geomechanical characteristics, and porosity and permeability during high-pressure injection, through rock geomechanics testing, core-flood experiment, and SEM scanni
APA, Harvard, Vancouver, ISO, and other styles
28

Cozzolino, F., V. Mennella, A. C. Ruggeri, et al. "Martian environmental chamber: Dust system injection." Planetary and Space Science 190 (October 2020): 104971. http://dx.doi.org/10.1016/j.pss.2020.104971.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Rajashekhar, Chandrashekharapua Ramachandraiah, Tumkur Krishnamurthy Chandrashekar, Chebbiyyan Umashankar, and Rajagopal Harish Kumar. "STUDIES ON EFFECTS OF COMBUSTION CHAMBER GEOMETRY AND INJECTION PRESSURE ON BIODIESEL COMBUSTION." Transactions of the Canadian Society for Mechanical Engineering 36, no. 4 (2012): 429–38. http://dx.doi.org/10.1139/tcsme-2012-0030.

Full text
Abstract:
Combustion of biodiesels has inherent problems due to their high viscosity and low volatility. This paper relates the modification of engine combustion chamber design, for inducing turbulence to improve the combustibility of combustible mixture. A survey of literature shows that experimental studies have not been done on a tri-chambered piston for evaluating influence on the performance and emission characteristics using diesel blends as well. The objective of this work is to study the effect of combustion chamber geometry and injection pressure on performance and emissions of a biodiesel (Jat
APA, Harvard, Vancouver, ISO, and other styles
30

Zhang, Li, Zhaoming Huang, Tao Wang, Niu Zhao, Haiyan Cheng, and Weiguo Chen. "Lean combustion and emission performance of a gasoline direct injection engine with active pre-chamber." Advances in Mechanical Engineering 14, no. 7 (2022): 168781322211134. http://dx.doi.org/10.1177/16878132221113453.

Full text
Abstract:
Pre-chamber jet ignition technology can effectively improve flame propagation speed and in-cylinder combustion rate, so it is conducive to the improvement of thermal efficiency and fuel economy. While, studies on the key parameters of the influence of active pre-chamber on combustion and emissions are not systematic. The influence of the key parameters of injection control in active pre-chamber on combustion and emission is not clear at present. Thus, in this paper, an active pre-chamber jet ignition system was designed and used in a single cylinder GDI engine, and the effects of compression r
APA, Harvard, Vancouver, ISO, and other styles
31

Han, Kwang Eon, Su Hwan Park, and Seung Min Lee. "A Case of Endophthalmitis with Atypical Anterior Symptom by Subconjunctival Dexamethasone Injection after Cataract Surgery." Annals of Optometry and Contact Lens 22, no. 4 (2023): 157–62. http://dx.doi.org/10.52725/aocl.2023.22.4.157.

Full text
Abstract:
Purpose: To report a case of endophthalmitis with non-specific anterior segment symptom by subconjunctival dexamethasone injection and anterior chamber irrigation for the anterior chamber inflammation resulted in delayed diagnosis after cataract surgery.Case summary: A 74-year-old female patient with visual disturbance and anterior chamber inflammation had subconjunctival dexamethasone injection and anterior chamber irrigation after 5 days of cataract surgery. On the 7th day after surgery, the anterior chamber inflammation had decreased without visual acuity improvement and additional subconju
APA, Harvard, Vancouver, ISO, and other styles
32

Vaghela, Ravikumar, Andreas Arkudas, Daniel Gage, et al. "A Novel Window into Angiogenesis—Intravital Microscopy in the AV-Loop-Model." Cells 12, no. 2 (2023): 261. http://dx.doi.org/10.3390/cells12020261.

Full text
Abstract:
Due to the limitations of current in vivo experimental designs, our comprehensive knowledge of vascular development and its implications for the development of large-scale engineered tissue constructs is very limited. Therefore, the purpose of this study was to develop unique in vivo imaging chambers that allow the live visualization of cellular processes in the arteriovenous (AV) loop model in rats. We have developed two different types of chambers. Chamber A is installed in the skin using the purse sting fixing method, while chamber B is installed subcutaneously under the skin. Both chambers
APA, Harvard, Vancouver, ISO, and other styles
33

Myson, Myson. "PENGARUH INJEKSI AIR DAN PENGATURAN DERAJAT PENGAPIAN TERHADAP PENURUNAN KONSUMSI BAHAN BAKAR MESIN SEPEDA MOTOR." Jurnal Civronlit Unbari 2, no. 1 (2017): 23. http://dx.doi.org/10.33087/civronlit.v2i1.14.

Full text
Abstract:
Water injection is a hydraulic technique of injecting water into the combustion chamber with the purpose to decrease the amount of fuel sipped by pistons during the expansion, and replaced it with water directly injected to combustion chamber. This water injection process also reduce temperature in combustion chamber . Besides degree of ignition is having a significant effect on quality of combustion earning. Angle of earlier ignition will cause increase of combustion pressure speed, which in turn makes pressure result of combustion in excelsior cylinder. But if degree of ignition in backs int
APA, Harvard, Vancouver, ISO, and other styles
34

Chehroudi, B., P. Lombardi, P. G. Felton, and F. V. Bracco. "Spray Photographs, Poppet Lift, and Injection Pressure of an Oscillating Poppet Injector." Journal of Fluids Engineering 109, no. 3 (1987): 289–96. http://dx.doi.org/10.1115/1.3242663.

Full text
Abstract:
Sprays from an injector with a conical oscillating poppet and supplied with fuel at injection rates similar to those used in direct-injection stratified-charge engines have been characterized. Instantaneous injection pressure and poppet lift were measured and short-exposure backlit photographs were taken at several times during injection. Spray axial tip penetration and velocity were determined from the photographs. The experiments were conducted in a constant-volume pressure vessel. The gas was nitrogen and the liquid was hexane. The gas temperature was either 25° or 55°C. The experiments inc
APA, Harvard, Vancouver, ISO, and other styles
35

Jeswani, A. L., and J. A. Roux. "Impact of Processing Parameters and Tapering of Injection Chamber Walls in Resin Injection Pultrusion." Polymers and Polymer Composites 15, no. 7 (2007): 507–19. http://dx.doi.org/10.1177/096739110701500701.

Full text
Abstract:
This study seeks to improve the wet-out and thus the quality of the pultruded part in the tapered injection pultrusion process. Complete wet-out of the dry fibre reinforcement by the liquid resin depends strongly on the processing parameters. Process parameters modelled were: fibre pull speed, fibre volume fraction and resin viscosity. In this work a 3-D finite volume technique was developed to simulate the flow of polyester resin through the glass rovings. The results show the impact of the tapering of the injection chamber walls on the minimum injection pressure necessary to achieve complete
APA, Harvard, Vancouver, ISO, and other styles
36

Xi, Wenxiong, Pengchao Liu, Rongdi Zhang, Tianyang Dong, and Jian Liu. "Numerical Investigation of Flow Structures and Combustion Mechanisms with Different Injection Locations in a Hydrogen-Fueled Scramjet Combustor." Fire 7, no. 6 (2024): 191. http://dx.doi.org/10.3390/fire7060191.

Full text
Abstract:
This work primarily focuses on a three-dimensional model of flame propagation and stable combustion in a scramjet chamber. The one-equation LES turbulence model is adopted to close the sub-grid-scale turbulent viscosity terms. The finite-rate combustion model, along with the Jachimowski detailed hydrogen reaction mechanism with eight components and nineteen steps, is used to analyze the flame propagation characteristics of hydrogen combustion in the scramjet combustion chamber. Initially, based on the combustion chamber model, the effect of different injection locations and equivalence ratios
APA, Harvard, Vancouver, ISO, and other styles
37

Kouremenos, D. A., C. D. Rakopoulos, and D. Hountalas. "Thermodynamic Analysis of Indirect Injection Diesel Engines by Two-Zone Modeling of Combustion." Journal of Engineering for Gas Turbines and Power 112, no. 1 (1990): 138–49. http://dx.doi.org/10.1115/1.2906468.

Full text
Abstract:
This work presents a thermodynamic analysis of a naturally aspirated, four-stroke, diesel engine with a swirl prechamber, under firing conditions during the open and closed part of the cycle. For calculating the heat exchange between gas and walls in both the main chamber and (swirl) prechamber, the relevant characteristic velocities and lengths are calculated by setting up a zero-dimensional energy cascade turbulence model. One-dimensional, quasi-steady, compressible flow with heat transfer inside the throat passageway connecting the two chambers is used. Combustion in both the main chamber a
APA, Harvard, Vancouver, ISO, and other styles
38

Li, Yuan, Jinxiang Liu, Weiqing Huang, and Nana Wang. "Effect of In-Cylinder Low-Pressure Direct Injection Strategy on the Atomization and Combustion Process of a Small-Scaled Gasoline Wankel Rotary Engine." International Journal of Energy Research 2023 (February 6, 2023): 1–14. http://dx.doi.org/10.1155/2023/3716468.

Full text
Abstract:
To solve the problem of poor atomization and combustion in a small-scaled gasoline Wankel rotary engine (WRE) with low-pressure port injection mode, the numerical simulation was used to optimize the injection strategy. Firstly, the effects of in-cylinder temperature and pressure on gasoline atomization characteristics were studied, and the optimal injection timing was determined. Based on this, the influence of injection position, injection angle, and installation direction on the atomization, fuel-air mixing, and combustion processes of low-pressure direct injection (DI) small-scaled gasoline
APA, Harvard, Vancouver, ISO, and other styles
39

Izmullaev, B. L., A. K. Abdrakhmanov, and A. A. Medet. "Intravitreal injection of Vigamox® (Moxifloxacin® preservative-free) combined with vancomycin for treating postoperative endophthalmitis." Modern technologies in ophtalmology, no. 1 (March 25, 2022): 177–82. http://dx.doi.org/10.25276/2312-4911-2022-1-177-182.

Full text
Abstract:
Acute bacterial postoperative endophthalmitis is inflammation of the internal eye eyeball tunic with the formation of exudate in the vitreous chamber and / or anterior chamber which can quickly lead to an irreversible loss of visual functions, and sometimes loss of the eye as an organ developing most often after surgical treatment of cataracts. The generally accepted standard of the acute bacterial postoperative endophthalmitis treatment (the “gold standard”) includes vitrectomy, sampling of contents of the vitreous chamber and anterior chamber for microbial analysis, and determination of its
APA, Harvard, Vancouver, ISO, and other styles
40

Izmullaev, B. L., A. K. Abdrakhmanov, and A. A. Medet. "Intravitreal injection of Vigamox® (Moxifloxacin® preservative-free) combined with vancomycin for treating postoperative endophthalmitis." Modern technologies in ophtalmology, no. 1 (March 25, 2022): 177–82. http://dx.doi.org/10.25276/2312-4911-2022-1-177-182.

Full text
Abstract:
Acute bacterial postoperative endophthalmitis is inflammation of the internal eye eyeball tunic with the formation of exudate in the vitreous chamber and / or anterior chamber which can quickly lead to an irreversible loss of visual functions, and sometimes loss of the eye as an organ developing most often after surgical treatment of cataracts. The generally accepted standard of the acute bacterial postoperative endophthalmitis treatment (the “gold standard”) includes vitrectomy, sampling of contents of the vitreous chamber and anterior chamber for microbial analysis, and determination of its
APA, Harvard, Vancouver, ISO, and other styles
41

Hajialimohammadi, Alireza, Saeed Ahmadisoleymani, Amir Abdullah, Omid Asgari, and Foad Rezai. "Design and Manufacturing of a Constant Volume Test Combustion Chamber for Jet and Flame Visualization of CNG Direct Injection." Applied Mechanics and Materials 217-219 (November 2012): 2539–45. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2539.

Full text
Abstract:
Constant volume transparent test combustion chambers are extensively used for investigating injection and fuel burning properties of various combustion engines. Their configuration depends on the engine type and the research purpose. Material of components, shape and dimensions of the chamber and its parts, ease of use, accessibility, sealing and safety of the assembly are the parameters needed to be considered in designing the test cell. This paper explains, structural design of a test combustion chamber and its optical windows using finite element analysis of ANSYS 12.0 software for bearing
APA, Harvard, Vancouver, ISO, and other styles
42

Andreeva, Y. S., L. Alkharki, M. V. Budzinskaya, and M. O. Meremkulova. "Effect of intravitreal injections of anti-VEGF drugs on intraocular pressure and biometric parameters of the anterior segment of the eye." Modern technologies in ophtalmology 60, no. 2 (2025): 97–98. https://doi.org/10.25276/2312-4911-2025-2-97-98.

Full text
Abstract:
Background Understanding the impact of intravitreal injections on anterior chamber parameters and intraocular pressure in patients with different lens types is important for optimizing nAMD therapy [1–3]. Objective To compare changes in intraocular pressure and anterior chamber biometric parameters in patients with their own lens and intraocular lens after multiple injections of an anti-VEGF drug in the treatment of nAMD. Material and methods The study included 60 patients. IOP measurements were performed using an ICare Pro contact tonometer, and anterior chamber parameters were assessed using
APA, Harvard, Vancouver, ISO, and other styles
43

Liu, Zhenming, Nan Liu, and Jingbin Liu. "Study of the Influencing Factors on the Small-Quantity Fuel Injection of Piezoelectric Injector." Micromachines 13, no. 5 (2022): 813. http://dx.doi.org/10.3390/mi13050813.

Full text
Abstract:
The piezoelectric injection-system provides a reliable approach for precise small-quantity fuel injection due to its fast, dynamic response. Considering the nonlinearity of a piezoelectric actuator, the complete electro-mechanical-hydraulic model of the piezoelectric injector was established and verified experimentally, which showed that it could accurately predict the fuel injection quantity. The small-quantity fuel injection with different driving voltages, pulse widths, and rail pressures was analyzed. The effects of key structural parameters of the injector on the delivery, control-chamber
APA, Harvard, Vancouver, ISO, and other styles
44

Berezovskaya, I. E. "INVESTIGATION OF THE INFLUENCE OF LIQUID FUEL INJECTION RATE ON THE COMBUSTION PROCESS USING KIVA–II SOFTWARE." Eurasian Physical Technical Journal 20, no. 3(45) (2023): 43–51. http://dx.doi.org/10.31489/2023no3/43-51.

Full text
Abstract:
In this work, the ignition of liquid fuel was studied at various rates of fuel injection into the combustion chamber. The studied processes are described by the following equations: continuity, momentum, energy, k-ɛ turbulence model and others. The computational experiment was carried out using the KIVA-II software. The numerical method is efficient and takes into account various factors such as multistage chemical chain reactions, transfer of momentum, heat and mass by convection, radiation, turbulence, etc. In order to select the optimal parameters of the organization of these processes infl
APA, Harvard, Vancouver, ISO, and other styles
45

Sousa, Liliana B., Paulo Santos-Costa, Inês A. Marques, Arménio Cruz, Anabela Salgueiro-Oliveira, and Pedro Parreira. "Brief Report on Double-Chamber Syringes Patents and Implications for Infusion Therapy Safety and Efficiency." International Journal of Environmental Research and Public Health 17, no. 21 (2020): 8209. http://dx.doi.org/10.3390/ijerph17218209.

Full text
Abstract:
This review aimed to map the existing patents of double-chamber syringes that can be used for intravenous drug administration and catheter flush. A search was conducted in the Google patents database for records published prior to 28 October 2020, using several search terms related to double-chamber syringes (DCS). Study eligibility and data extraction were performed by two independent reviewers. Of the initial 26,110 patents found, 24 were included in this review. The 24 DCS that were found display two or more independent chambers that allow for the administration of multiple solutions. While
APA, Harvard, Vancouver, ISO, and other styles
46

Fedorova, M. A. "Y. S. Hu, H. J. Wei, B. Yu, O. X. Yang, J. Wang, J. Wu. Research on the vapor injection of two-stage rotary compressor / trans. from Engl. M. A. Fedorova." Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering 5, no. 4 (2021): 65–74. http://dx.doi.org/10.25206/2588-0373-2021-5-4-65-74.

Full text
Abstract:
In order to understand the vapor injection flow characteristics of two-stage rotary compressor in the course of compression, a mathematical model based on mass conservation equation, energy equation and thermodynamic identity was established and proved by P-V diagram testing results. Some useful conclusions about pressure in the intermediate chamber and mass flow of vapor injection in the course of compression were also given out. The results show that, gas backflow between the intermediate chamber and the vapor injection channel is an important defection of two-stage rotary compressor which c
APA, Harvard, Vancouver, ISO, and other styles
47

Birk, Avi, and James DeSpirito. "The Interaction of Spinning Liquid Film With Swirling Gas in Cylindrical Vessel—Experiments and Numerical Simulations." Journal of Fluids Engineering 120, no. 4 (1998): 690–97. http://dx.doi.org/10.1115/1.2820725.

Full text
Abstract:
Experimental flow visualizations and numerical simulations of the interaction of a spinning liquid film with a swirling gas in a cylindrical vessel are reported. A gas/liquid flow that simulates the high-pressure conditions of combustion was successfully visualized in a transparent test chamber. The test chamber was a mockup of a liquid propellant gun ignition system component called the hydrodynamically-stabilized combustor. Water-glycerol mixtures were used for the liquid, and ballistically compressed helium-nitrogen was used for the gas. The liquid is injected tangentially along the cylindr
APA, Harvard, Vancouver, ISO, and other styles
48

He, Zheng, Xuan Gu, and Ye Gao. "Computational Study on Influence of Water Injection Angle to Aluminum/Water Reaction Motor." Applied Mechanics and Materials 248 (December 2012): 539–44. http://dx.doi.org/10.4028/www.scientific.net/amm.248.539.

Full text
Abstract:
In Aluminum/Water Reaction Motor chamber, water injection angle plays an important role on mixture of aluminum particle fuel and water droplets and can affect motor performance further. On the basis of FLUENT software and taking phase transition and reaction between water droplets and aluminum particles into account, numerically simulated cases of different water injection angles by Particle Stochastic Trajectory Model. Computed total evaporation rate of water droplets, reaction rate of aluminum particles and specific impulse for the motor. Furthermore judged injection angle effect from these
APA, Harvard, Vancouver, ISO, and other styles
49

Gumus, Gulsah, Mustafa Berhuni, and Cem Ozturkmen. "The short-term effects of intravitreal bevacizumab injection on intraocular pressure, cornea, iridocorneal angle, and anterior chamber." Therapeutic Advances in Ophthalmology 14 (January 2022): 251584142211337. http://dx.doi.org/10.1177/25158414221133772.

Full text
Abstract:
Background: Transient increase in intraocular pressure (IOP), changes in anterior chamber parameters, and changes in aqueous humor dynamics may occur after intravitreal injections because of intravitreal volume changes. Objective: In this observational study, we investigated the early effects of intravitreal bevacizumab (IVB) injection on IOP, central corneal thickness (CCT), corneal volume (CV), anterior chamber depth (ACD), and iridocorneal angle (ICA). Method: The patients who had one single-dose IVB (2.5 mg/0.1 mL) injection were included in the study. The patients underwent IOP, CCT, CV,
APA, Harvard, Vancouver, ISO, and other styles
50

Liu Hanqin, Jiang Weilin, Guo Wen, Wang Tiehui, and Chen Hongxi. "Chimeric fish constructed by blastula chamber injection." Aquaculture 111, no. 1-4 (1993): 310. http://dx.doi.org/10.1016/0044-8486(93)90078-d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!