Relevant bibliographies by topics / Injection, Molding, Granite, Ceramics / Journal articles
To see the other types of publications on this topic, follow the link: Injection, Molding, Granite, Ceramics.

Journal articles on the topic 'Injection, Molding, Granite, Ceramics'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Injection, Molding, Granite, Ceramics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Arakida, Yutaka. "Injection molding of metal and ceramics powder." Bulletin of the Japan Institute of Metals 26, no. 6 (1987): 473–80. http://dx.doi.org/10.2320/materia1962.26.473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

TAKAHASHI, Minoru, and Suguru SUZUKI. "Injection molding of ceramics. (2). Rheological problems during mixing and molding." Journal of the Society of Powder Technology, Japan 25, no. 11 (1988): 755–60. http://dx.doi.org/10.4164/sptj.25.755.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wright, Jadith K., Mohan J. Edirisinghe, Jian G. Zhang, and Julian R. G. Evans. "Particle Packing in Ceramic Injection Molding." Journal of the American Ceramic Society 73, no. 9 (September 1990): 2653–58. http://dx.doi.org/10.1111/j.1151-2916.1990.tb06742.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kuzmin, Anton M., Vladimir N. Vodyakov, Alexandr V. Kotin, Vyacheslav V. Kuznetsov, and Mariya I. Murneva. "Study of the Influence of the Forming Method on the Physical and Mechanical Characteristics of Thermoplastic Polymeric Materials." Key Engineering Materials 869 (October 2020): 342–47. http://dx.doi.org/10.4028/www.scientific.net/kem.869.342.

Full text
Abstract:
This paper presents the results of the study of the effect of polymer materials compression and injection methods of molding on the physical and mechanical properties of the resulting samples. Widely used polymers such as poly-amide, thermoplastic elastomer and polyketone were taken as the objects of study. Granite composites based on polyamide were produced by PolyLab Rheomex RTW 16 twin-screw extruder, then modified with fine powders of schungite, graphite and silicon dioxide. Samples for testing in the form of double-sided blades were obtained by injection molding on a Babyplast 6/10V machine and compression molding on a Gibitre hydraulic press. Elastic-strength tests of the obtained samples were carried out on a tensile testing machine UAI-7000 M.
APA, Harvard, Vancouver, ISO, and other styles
5

Hecht, James L. "Macrocomposites made by injection molding." Polymer Composites 7, no. 3 (June 1986): 186–90. http://dx.doi.org/10.1002/pc.750070309.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Saitoh, Katsuyoshi, Yoshimitsu Kankawa, Kei Ameyama, and Yasunari Kaneko. "Application of Binder Extraction to Ceramics Injection Molding Parts." Journal of the Japan Society of Powder and Powder Metallurgy 38, no. 5 (1991): 627–29. http://dx.doi.org/10.2497/jjspm.38.627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Xian Feng, Zhi Peng Xie, and Lin Lin Wang. "Fabrication of Porous Zirconia Ceramics by Injection Molding Method." Key Engineering Materials 368-372 (February 2008): 758–61. http://dx.doi.org/10.4028/www.scientific.net/kem.368-372.758.

Full text
Abstract:
An innovative processing route for fabricating porous zirconia ceramics has been developed based on traditional injection molding method. Azodicarbonamide (AC) was used as the foaming agents and mixed with the zirconia powder and conventional binders (polypropylene, ethylene/vinyl acetate, paraffin wax and stearic acid). There were three stages in the foaming course: (1) Small bubbles nucleated when AC decomposed into N2 and CO in the barrel. (2) Viscosity and pressure drop led to the growth of the bubbles when the melt feedstock was injected into the die cavity. (3) The porous structure was kept in the solidified body. The AC content and injection parameters were optimized to control the pore density and size. The porous green body was debinded at the heating-up rate of 0.5 °C /min to 450°C and sintered at 1550°C. Samples with porosity of 40%-50% and pore sizes from 200-250μm were prepared when the addition of AC was 0.3% by weight. The results showed that ceramic injection molding method was also suitable for fabricating the porous ceramics.
APA, Harvard, Vancouver, ISO, and other styles
8

OHSAKA, Shigeru, Hideo TAKAHASHI, Nobuhiro SHINOHARA, Masataro OKUMIYA, Hiroshige ITO, and Keizo UEMATSU. "Microstructure of Alumina Ceramics Made by Injection Molding Process." Journal of the Ceramic Society of Japan 104, no. 1210 (1996): 567–70. http://dx.doi.org/10.2109/jcersj.104.567.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gao, Yan, Kang Ming Huang, Zhen Kun Fan, and Zhi Peng Xie. "Injection Molding of Zirconia Ceramics Using Water-Soluble Binder." Key Engineering Materials 336-338 (April 2007): 1017–20. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.1017.

Full text
Abstract:
Water-soluble binder based injection molding of submicrometer-sized and stabilized zirconia was reported in this paper. The binder phase is chosen as the mixtures of polyethylene glycol, high-density polyethylene, polyvinyl butyral and stearic acid. Binder removal is accomplished by a two-steped process. The water-soluble constituent is firstly removed by dissolution in the water and the remaining is removed through the followed thermal treatment. The apparent viscosities of different kinds of feedstock were tested. The influences of water-leaching time and temperature on the efficiency of PEG removal were discussed.
APA, Harvard, Vancouver, ISO, and other styles
10

Kryuchkov, Yu N., and V. V. Lashneva. "Injection molding plant for ceramic production." Glass and Ceramics 55, no. 9-10 (September 1998): 317–18. http://dx.doi.org/10.1007/bf02694778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Singh, R., F. Chen, and F. R. Jones. "Injection molding of glass fiber reinforced phenolic composites. 2: Study of the injection molding process." Polymer Composites 19, no. 1 (February 1998): 37–47. http://dx.doi.org/10.1002/pc.10073.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

KANKAWA, Yoshimitsu, Yasunari KANEKO, and Katsuyoshi SAITOU. "Injection Molding of β-TCP Powder." Journal of the Ceramic Society of Japan 100, no. 1158 (1992): 211–14. http://dx.doi.org/10.2109/jcersj.100.211.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Kankawa, Yoshimitsu, Katsuyoshi Saitou, Yasunari Kaneko, and Norio Kasahara. "Injection Molding of Ceramics Powder(CIM) with Polyethylene Glycol(PEG)." Journal of the Japan Society of Powder and Powder Metallurgy 38, no. 6 (1991): 777–81. http://dx.doi.org/10.2497/jjspm.38.777.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Miyamoto, Kei, Yuzuru Takahashi, Suguru Inamura, and Hiroki Miyamoto. "Preparation of Al2O3 ceramics by low pressure injection molding method." Journal of the Japan Society of Powder and Powder Metallurgy 34, no. 9 (1987): 378–82. http://dx.doi.org/10.2497/jjspm.34.378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Miyamoto, Kei, Yuzuru Takahashi, Suguru Inamura, and Hiroki Miyamoto. "Preparation of Si3N4 ceramics by low pressure injection molding method." Journal of the Japan Society of Powder and Powder Metallurgy 35, no. 7 (1988): 633–35. http://dx.doi.org/10.2497/jjspm.35.633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Ruprecht, R., T. Gietzelt, K. Müller, V. Piotter, and J. Haußelt. "Injection molding of microstructured components from plastics, metals and ceramics." Microsystem Technologies 8, no. 4-5 (August 1, 2002): 351–58. http://dx.doi.org/10.1007/s00542-001-0153-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

NAGAI, Yumi, Satoshi KOBAYASHI, and Toshiko OSADA. "Fabrication and Characterization of Biocompatible Oxide Ceramics by Injection Molding." Proceedings of the JSME Conference on Frontiers in Bioengineering 2020.31 (2020): 2C20. http://dx.doi.org/10.1299/jsmebiofro.2020.31.2c20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Pritchard, M., and A. G. Gibson. "Property modification of bulk molding compounds for use in injection molding." Polymer Composites 9, no. 2 (April 1988): 131–38. http://dx.doi.org/10.1002/pc.750090206.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Fanelli, Anthony J., Robert D. Silvers, William S. Frei, Joan V. Burlew, and Gary B. Marsh. "New Aqueous Injection Molding Process for Ceramic Powders." Journal of the American Ceramic Society 72, no. 10 (October 1989): 1833–36. http://dx.doi.org/10.1111/j.1151-2916.1989.tb05987.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Mao, Qianchao, Yifeng Hong, Tom P. Wyatt, Jinnan Chen, Youjiang Wang, Jian Wang, and Donggang Yao. "Insert injection molding of polypropylene single-polymer composites." Composites Science and Technology 106 (January 2015): 47–54. http://dx.doi.org/10.1016/j.compscitech.2014.11.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Templeton, P. A. "Strength Predictions of Injection Molding Compounds." Journal of Reinforced Plastics and Composites 9, no. 3 (May 1990): 210–25. http://dx.doi.org/10.1177/073168449000900301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Nunn, Robert E., and Cory P. Grolman. "Adaptive Process Control for Injection Molding." Journal of Reinforced Plastics and Composites 9, no. 3 (May 1990): 282–98. http://dx.doi.org/10.1177/073168449000900307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Krindges, Israel, Raquel Andreola, Cláudio A. Perottoni, and Janete E. Zorzi. "Low-Pressure Injection Molding of Ceramic Springs." International Journal of Applied Ceramic Technology 5, no. 3 (May 2008): 243–48. http://dx.doi.org/10.1111/j.1744-7402.2008.02226.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Xiao-chun, Yin, Zeng Wen-bin, He Guang-jian, Yang Zhi-tao, and Qu Jin-ping. "Influence of pressure oscillation on injection molding process." Journal of Thermoplastic Composite Materials 27, no. 10 (September 24, 2013): 1417–27. http://dx.doi.org/10.1177/0892705713505612.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Rémillard, B., T. Vu-Khanh, B. Fisa, and S. Naik. "Reaction injection molding of mica reinforced polyurethane." Polymer Composites 7, no. 5 (October 1986): 395–403. http://dx.doi.org/10.1002/pc.750070517.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Miyamoto, Kei, Yuzuru Takahashi, Suguru Inamura, and Hiroki Miyamoto. "Preparation of Si3N4 ceramics by low pressure injection molding method. (II)." Journal of the Japan Society of Powder and Powder Metallurgy 36, no. 2 (1989): 192–94. http://dx.doi.org/10.2497/jjspm.36.192.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

German, Randall, and Robert Cornwall. "The Worldwide Market and Technology for Injection Molding Metals and Ceramics." Materials Technology 12, no. 3-4 (January 1997): 119–20. http://dx.doi.org/10.1080/10667857.1997.11752742.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Fukumoto, Isao, Eiki Arakaki, Shunei Mekaru, and Jiro Matsuda. "215 Development of Ceramics Injection Molding Technology Using Clay and Sludge." Proceedings of Conference of Chugoku-Shikoku Branch 005.2 (2000): 61–62. http://dx.doi.org/10.1299/jsmecs.005.2.61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Sakai, Tadamoto. "State of the art of injection molding of high-performance ceramics." Advances in Polymer Technology 11, no. 1 (1991): 53–67. http://dx.doi.org/10.1002/adv.1991.060110107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Dönmez, Sinan, and Aykut Kentli. "Influence of injection molding parameters on electrical resistivity of carbon nanotube reinforced polycarbonate." Science and Engineering of Composite Materials 23, no. 2 (March 1, 2016): 135–44. http://dx.doi.org/10.1515/secm-2013-0291.

Full text
Abstract:
AbstractElectrical properties of plastic products can be adjusted by adding a certain amount of carbon nanotubes (CNT) in the injection molding process. However, injection molding parameters should be arranged carefully due to their influence on electrical properties of CNT-reinforced plastic composites. In this study, polycarbonate/CNT nanocomposites, having three different CNT concentrations (1, 3 and 5 wt%), were produced and injection molded by using three different injection temperatures and speeds to investigate their influence on electrical resistivity. It was found that the electrical resistivity was influenced greatly by the injection temperature when 1 wt% amount of CNT was used in the nanocomposite. However, the effect of injection speed was negligible.
APA, Harvard, Vancouver, ISO, and other styles
31

Wiesner, V. L., J. P. Youngblood, and R. W. Trice. "Room-temperature injection molding of aqueous alumina-polyvinylpyrrolidone suspensions." Journal of the European Ceramic Society 34, no. 2 (February 2014): 453–63. http://dx.doi.org/10.1016/j.jeurceramsoc.2013.08.017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Wright, Judith K., Julian R. G. Evans, and Mohan J. Edirisinghe. "Degradation of Polyolefin Blends Used for Ceramic Injection Molding." Journal of the American Ceramic Society 72, no. 10 (October 1989): 1822–28. http://dx.doi.org/10.1111/j.1151-2916.1989.tb05985.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

German, Randall M. "Homogeneity Effects on Feedstock Viscosity in Powder Injection Molding." Journal of the American Ceramic Society 77, no. 1 (January 1994): 283–85. http://dx.doi.org/10.1111/j.1151-2916.1994.tb06992.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Malzahn, J. C., and J. M. Schultz. "Transverse core fiber alignment in short-fiber injection-molding." Composites Science and Technology 25, no. 3 (January 1986): 187–92. http://dx.doi.org/10.1016/0266-3538(86)90009-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Pedroti, Leonardo Gonçalves, S. N. Monteiro, C. M. Vieira, and J. Alexandre. "Properties and Microstructure of Clay Ceramics with Granite Waste for Press-Molded Structural Block." Materials Science Forum 727-728 (August 2012): 809–14. http://dx.doi.org/10.4028/www.scientific.net/msf.727-728.809.

Full text
Abstract:
Extrusion of a clay body is the most applied process in the ceramic industries for manufacturing structural blocks. Nowadays, the assembly of such blocks through a fitting system is gaining attention owing to the saving in material and reducing in the cost of the building construction. However, this fitting system requires a press-molding, rather than extrusion, to allow blocks to be fabricated with different shapes. In this work, the ideal composition of clay bodies incorporated with granite powder waste was investigated for the production of press-molded ceramic blocks. An experimental design was applied to determine the optimum properties and microstructures. Press load of 15 ton and temperatures from 850 to 1050°C were considered. The results indicated that mechanical strength of 30 MPa and water absorption of 15% could be attained with the incorporation of up to 17% of granite powder waste.
APA, Harvard, Vancouver, ISO, and other styles
36

Chen, Shia-Chung, Yung-Chung Chen, Nien-Tien Cheng, and Ming-Shyan Huang. "Simulations and Applications of Injection-Compression Molding." Journal of Reinforced Plastics and Composites 18, no. 8 (May 1999): 724–34. http://dx.doi.org/10.1177/073168449901800803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Chen, Chun-Sheng, Wei-Seng Cheng, Tzung-Shinug Wang, and Rean-Der Chien. "Optimum Design of Gas-assisted Injection Molding." Journal of Reinforced Plastics and Composites 24, no. 15 (June 17, 2005): 1577–86. http://dx.doi.org/10.1177/0731684405050395.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Yu, Xin Gang, Lan Yun Liu, Yan Bin Zuo, Zhi Peng Xie, Bo Lin Wu, Jin Long Yang, Jian Bao Li, Yong Huang, Lin Wang, and Yi Gong. "On the Defects in Injection-Moulded Technical Ceramics." Key Engineering Materials 336-338 (April 2007): 1025–27. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.1025.

Full text
Abstract:
A heated sprue device for ceramic injection moulding was used to research the defects in injection-moulded technical ceramics. By use of the heated sprue device, the problem of sprue solidification was resolved and the density of the injection moulding specimens was increased while the defects eliminated. The influence of the processing parameters on the defects of the injection molding specimens was investigated in detail by X-ray radiography camera and photograph. It turns that the sprue solidification time has much influence on the defects in injection-moulded technical ceramics. Reasons causing the results above were also analyzed. Based on the research, bars of 20mm in diameter without macroscopic defects and turbine blade of fine property with Si3N4/SiC(w) materials were prepared by injection moulding.
APA, Harvard, Vancouver, ISO, and other styles
39

Gosselin, R., D. Rodrigue, and B. Riedl. "Injection Molding of Postconsumer Wood–Plastic Composites I: Morphology." Journal of Thermoplastic Composite Materials 19, no. 6 (November 2006): 639–57. http://dx.doi.org/10.1177/0892705706067484.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Zhang, Jixiang, Xiaoyi Yin, Fengzhi Liu, and Pan Yang. "The simulation of the warpage rule of the thin-walled part of polypropylene composite based on the coupling effect of mold deformation and injection molding process." Science and Engineering of Composite Materials 25, no. 3 (April 25, 2018): 593–601. http://dx.doi.org/10.1515/secm-2015-0195.

Full text
Abstract:
Abstract Aiming at the problem that a thin-walled plastic part easily produces warpage, an orthogonal experimental method was used for multiparameter coupling analysis, with mold structure parameters and injection molding process parameters considered synthetically. The plastic part deformation under different experiment schemes was comparatively studied, and the key factors affecting the plastic part warpage were analyzed. Then the injection molding process was optimized. The results showed that the important order of the influence factors for the plastic part warpage was packing pressure, packing time, cooling plan, mold temperature, and melt temperature. Among them, packing pressure was the most significant factor. The optimal injection molding process schemes reducing the plastic part warpage were melt temperature (260°C), mold temperature (60°C), packing pressure (150 MPa), packing time (2 s), and cooling plan 3. In this situation, the forming plate flatness was better.
APA, Harvard, Vancouver, ISO, and other styles
41

Liu, W., and Z. Xie. "Pressureless sintering behavior of injection molded alumina ceramics." Science of Sintering 46, no. 1 (2014): 3–13. http://dx.doi.org/10.2298/sos1401003l.

Full text
Abstract:
The pressureless sintering behaviors of two widely used submicron alumina (MgOdoped and undoped) with different solid loadings produced by injection molding have been studied systematically. Regardless of the sinterability of different powders depending on their inherent properties, solid loading plays a critical role on the sintering behavior of injection molded alumina, which greatly determines the densification and grain size, and leads to its full densification at low temperatures. As compared to the MgO-doped alumina powder, the undoped specimens exhibit a higher sinterability for its smaller particle size and larger surface area. While full densification could be achieved for MgO-doped powders with only a lower solid loading, due to the fact that MgO addition can reduce the detrimental effect of the large pore space on the pore-boundary separation.
APA, Harvard, Vancouver, ISO, and other styles
42

Chen, C. S. "Determination of the Injection Molding Process Parameters in Multicavity Injection Molds." Journal of Reinforced Plastics and Composites 25, no. 13 (March 23, 2006): 1367–73. http://dx.doi.org/10.1177/0731684406065080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

TAKAHASHI, Minoru, and Suguru SUZUKI. "Injection molding of ceramics. (1). History, processing and rheology of organic additives." Journal of the Society of Powder Technology, Japan 25, no. 7 (1988): 456–61. http://dx.doi.org/10.4164/sptj.25.456.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Lin, Samuel I.-En. "Near-net-shape forming of zirconia optical sleeves by ceramics injection molding." Ceramics International 27, no. 2 (January 2001): 205–14. http://dx.doi.org/10.1016/s0272-8842(00)00065-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Lindqvist, Karin, Elis Carlstrom, Michael Persson, and Roger Carlsson. "Organic Silanes and Titanates as Processing Additives for Injection Molding of Ceramics." Journal of the American Ceramic Society 72, no. 1 (January 1989): 99–103. http://dx.doi.org/10.1111/j.1151-2916.1989.tb05960.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Uematsu, Keizo, Shigeru Ohsaka, Nobuhiro Shinohara, and Masataro Okumiya. "Grain-Oriented Microstructure of Alumina Ceramics Made through the Injection Molding Process." Journal of the American Ceramic Society 80, no. 5 (January 21, 2005): 1313–15. http://dx.doi.org/10.1111/j.1151-2916.1997.tb02985.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Han, Jun Sae, Dong Yong Park, Dongguo Lin, Kwang Hyun Chung, Ravi Bollina, and Seong Jin Park. "Development of Powder Injection Molding Process for a Piezoelectric PAN-PZT Ceramics." Journal of Korean Powder Metallurgy Institute 23, no. 2 (April 30, 2016): 112–19. http://dx.doi.org/10.4150/kpmi.2016.23.2.112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Li, Xiping, Ningning Gong, Can Yang, Shuiping Zeng, Shihong Fu, and Ke Zhang. "Aluminum/polypropylene composites produced through injection molding." Journal of Materials Processing Technology 255 (May 2018): 635–43. http://dx.doi.org/10.1016/j.jmatprotec.2018.01.008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Hine, P. J., R. A. Duckett, I. M. Ward, P. S. Allan, and M. J. Bevis. "A comparison of short glass fiber reinforced polypropylene plates made by conventional injection molding and using shear controlled injection molding." Polymer Composites 17, no. 3 (June 1996): 400–407. http://dx.doi.org/10.1002/pc.10627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Duh, Robert J., Susan Mantell, Jeffrey H. Vogel, and Robert S. Maier. "Optimization of cure kinetics parameter estimation for structural reaction injection molding/resin transfer molding." Polymer Composites 22, no. 6 (December 2001): 730–41. http://dx.doi.org/10.1002/pc.10575.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Injection, Molding, Granite, Ceramics' for other source types:
Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography