Relevant bibliographies by topics / Injection moulding machine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Injection moulding machine'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Injection moulding machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Injection moulding machine"

1

Bang, Y.-B., and S. Ito. "Linear motor drive ultrahigh-speed injection moulding machine." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 216, no. 5 (2002): 773–81. http://dx.doi.org/10.1243/0954405021520283.

Full text
Abstract:
This paper presents a report on the development of a linear motor drive injection moulding machine for the attainment of ultrahigh-speed injection moulding. Until now it has been impossible to produce such a high speed with all-electric injection moulding machines, although the need for such ultrahigh-speed, electrically driven injection moulding machines has clearly existed. However, direct drive by linear motors may cause brief nozzle separation from the sprue bushing because of an inertia force as large as the total output thrust of the linear motors, and this momentary separation can cause
APA, Harvard, Vancouver, ISO, and other styles
2

Kobayashi, Y., and T. Akashi. "A Multiprocess Control of Injection Moulding Machine." IFAC Proceedings Volumes 20, no. 5 (1987): 51–56. http://dx.doi.org/10.1016/s1474-6670(17)55351-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Wei. "Injection Moulding Simulation Analysis of Handle Shell." Advanced Materials Research 798-799 (September 2013): 286–89. http://dx.doi.org/10.4028/www.scientific.net/amr.798-799.286.

Full text
Abstract:
This thesis first made an introduction to the functional and technical requirements of this product, and then determined its moulding process. After that, the injection moulding process parameters of the selected injection moulding machine were set, besides, it applied Moldflow software to make simulation analysis to multiple schemes of injection moulding process, and finally, the best mold structure was determined according to the final analysis result.
APA, Harvard, Vancouver, ISO, and other styles
4

Kiatmanaroj, S., V. Goodship, and G. F. Smith. "Sandwich Injection Moulding of Thermosetting Materials Part II: Effects of Moulding Parameters." Progress in Rubber, Plastics and Recycling Technology 21, no. 1 (2005): 27–38. http://dx.doi.org/10.1177/147776060502100102.

Full text
Abstract:
This paper describes experiments on the sandwich injection moulding of two thermosetting polyesters, a powder coating and a bulk moulding compound. The flow of the powder coating in the injection moulding machine at various tool temperatures was investigated in order to find the optimum conditions. The formation of the skin and core layers in the moulding component at various injection times is described and discussed.
APA, Harvard, Vancouver, ISO, and other styles
5

Chuankrerkkul, Nutthita, Pat Sooksaen, Piyawan Pakunthod, Tutiyachan Kosalwit, and Wanwara Pinthong. "Powder Injection Moulding of Alumina Using PEG/PVB Binder Systems." Key Engineering Materials 545 (March 2013): 173–76. http://dx.doi.org/10.4028/www.scientific.net/kem.545.173.

Full text
Abstract:
Powder injection moulding (PIM) is a process that is suitable for a fabrication of small and complex shape components. It consists of 4 main steps: feedstock preparation by mixing powder and binder, injection moulding of the prepared feedstock into the desired mould, removal of the binder and finally sintering to obtain materials with specific properties. In this study, powder injection moulding of alumina (Al2O3), using polyethylene glycol (PEG) based binder systems, was investigated. PEG is soluble in water; therefore, the use of organic solvents required for debinding of wax-based binder sy
APA, Harvard, Vancouver, ISO, and other styles
6

Arifin, Mohd Khairol A., Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Tang Sai Hong, and S. Sreenivasan. "Simulation of Thermoset Injection for Bulk Moulding Compounds (BMC)." Key Engineering Materials 471-472 (February 2011): 1101–6. http://dx.doi.org/10.4028/www.scientific.net/kem.471-472.1101.

Full text
Abstract:
This paper discusses about the simulation of the process of injection moulding for thermoset materials namely Bulk Moulding Compounds (BMC). BMC is a polyester resin based compound with glass fibre additives. In this paper a complex part was used to simulate and obtain the parameters for moulding BMC. Autodesk Moldflow Plastics Insight was used to run the simulation. Two main parameters i.e. Injection time and mould temperature were considered. Six different sets of parameters were used and the settings were optimized. The obtained optimized settings are 15.08 seconds and 145°C. The obtained
APA, Harvard, Vancouver, ISO, and other styles
7

Huang, S.-J., and T.-H. Lee. "Fuzzy logic controller for a retrofitted closed-loop injection moulding machine." Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 214, no. 1 (2000): 9–22. http://dx.doi.org/10.1243/0959651001540483.

Full text
Abstract:
For the purposes of producing precise products and providing the flexibility for products variation, an open-loop control commercial injection moulding machine is retrofitted into a closed-loop control system for monitoring the filling and post-filling phases of the injection processes. The hydraulic control unit, control and interface circuits, safety limit switches and personal-computer-based controller were redesigned and constructed. Since the injection moulding processes have complicated non-linear dynamics and model uncertainty, the application of a classical proportional-integral-deriva
APA, Harvard, Vancouver, ISO, and other styles
8

Akashi, Tomoyuki, and Munetaka Jotaki. "Analysis of plasticating process of injection moulding machine." IEEJ Transactions on Power and Energy 107, no. 7 (1987): 325–32. http://dx.doi.org/10.1541/ieejpes1972.107.325.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

KOBAYASHI, Yohji, and Tomoyuki AKASHI. "A Multistage Process Control of Injection Moulding Machine." Transactions of the Society of Instrument and Control Engineers 24, no. 8 (1988): 844–51. http://dx.doi.org/10.9746/sicetr1965.24.844.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lindert, Sven-Olaf, Gerald Reindl, and Kurt Schlacher. "Identification and Control of an Injection Moulding Machine." IFAC Proceedings Volumes 47, no. 3 (2014): 5878–83. http://dx.doi.org/10.3182/20140824-6-za-1003.01488.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Injection moulding machine"

1

Farrar, P. T. K. "Plastic injection moulding machine controllers." Thesis, Bucks New University, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378918.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fusser, Harry B. "A man-machine interface for PC-controlled injection moulding /." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60686.

Full text
Abstract:
In parallel to the development of a PC-control system for injection moulding, a workable user interface for man-machine communication was developed.<br>The hardware includes an IBM PC/AT, PS/2 model 70. A real-time multi-task operating system, QNX 4.0 (Quantum Software Sys. Ltd.) was installed to run applications programmed in the language C (WATCOM Sys. Inc.).<br>A top-down structure was adopted, comprising menus, warnings, and directives.<br>The user interface includes three tasks to run concurrently, the main-task, the real-time machine-status display task, and the task to display the curre
APA, Harvard, Vancouver, ISO, and other styles
3

Para, Marcel. "Výroba součásti Fixační podložka." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416436.

Full text
Abstract:
Order was given for the prodiction of 20 000 pieces of fixing washers. In this case was chosen injection moulding technology. Based on the research, a structural design of the mold was prepared together with the drawing documentation. From the range of materials, it was chosen polypropilene MOSTEN GB218, which is suitable for the given produstion. The simulation verified the reliability and quality of production. The parameters of injection moulding were determined by calculations, and the machine J180ADS – 180U was selected base of them. In the economic evaluation, the total costs for the pro
APA, Harvard, Vancouver, ISO, and other styles
4

Ramírez, Domínguez Edgar C. "Optical sensing of thermoplastics solidification in an injection moulding machine." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0024/MQ50654.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ping, Pau Kwok. "Systematic studies on noise control of plastic injection moulding machine." Thesis, University of Warwick, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.265624.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

John, Minchin, and Krishnakumar Balakrishnan. "Enhancement of Industrial Horizontal Rubber Injection Moulding Machine Feeding System." Thesis, Högskolan i Halmstad, Akademin för företagande, innovation och hållbarhet, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-44816.

Full text
Abstract:
This study aims to improve the design of the feeding system of industrial horizontal rubber injection moulding machines. There are many ways to implement this research. Still, the suitable design is to implement such a mechanism that will help reduce the operator intervention in the feeding system of the injection moulding machine. The FEM analysis is used to understand the real-world situation on the feed part or assembly. This analysis also provides the ability to detect the potential issues in the design, including the tension area of design and the weak spots. In the industrial horizontal
APA, Harvard, Vancouver, ISO, and other styles
7

Duffy, Christopher M. "The application of on line modification of resin kinetics to resin transfer moulding." Thesis, University of Nottingham, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.263410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Schiffers, Reinhard, Georg P. Holzinger, and Gernot Huster. "Adaptive process control for stabilizing the production process in injection moulding machines." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-200201.

Full text
Abstract:
Plastic injection moulding machines are a positive example of the possibilities in terms of performance and energy efficiency of modern hydraulic drives technology. In addition to the performance and energy efficiency of the machines, the quality of the plastic mouldings and an easy to use machines control is the focus. To ensure a constant plastics part quality the set process parameters of the injection moulding machines are kept constant by appropriate closed loop control strategies today. Assuming a constant quality of the processed plastic raw material, this strategy is effective. If it c
APA, Harvard, Vancouver, ISO, and other styles
9

Multáňová, Katarína. "Design vstřikovacího lisu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229377.

Full text
Abstract:
Diploma thesis deals with the development of injection moulding machine design. It is a type of industrial machine, which is designed for production of plastic parts by technology of compression molding. Injection and closing units in the machine are vertical orientated to each other. Injection moulding machine is equipped with rotary table. The main task of diploma work is to design an injection moulding machine with original shape for the future. Conception of the machine is based on present progresive technical solutions. Design of the machine tolerates main ergonomic demands and make the w
APA, Harvard, Vancouver, ISO, and other styles
10

Goussard, Charl Leonard. "Design analysis of a lomolding machine." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019.1/1199.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Injection moulding machine"

1

Pau, Kwok Ping. Systematic studies on noise control of plastic injection moulding machine. typescript, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Niemann, Klaus. Machine Setting Strategy for Thermoplastic Injection Moulding Machinery. Huthig Pub Ltd, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Great Britain. Plastics Processing IndustryHealth and Safety Liaison Committee. and British Plastics Federation, eds. Safety guidance on the guarding and use of injection moulding machines in the plastics and rubber industries. British Plastics Federation, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Injection moulding machine"

1

Nilsson, J. O. H., and H. T. Larker. "Ceramized Injection Moulding Machine for Contamination Free Preforming." In 4th International Symposium on Ceramic Materials and Components for Engines. Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2882-7_60.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lindert, Sven-Olaf, Gerald Reindl, and Kurt Schlacher. "Flatness Based Control of an Injection Moulding Machine." In Computer Aided Systems Theory - EUROCAST 2013. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-53862-9_36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cracknell, P. S., and R. W. Dyson. "The injection moulding machine and its influence on mould design." In Handbook of Thermoplastics Injection Mould Design. Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-015-7209-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Costa, N., A. Cunha, and B. Ribeiro. "Monitoring an Industrial Plastic Injection Moulding Machine Using Neural Networks." In Artificial Neural Nets and Genetic Algorithms. Springer Vienna, 1999. http://dx.doi.org/10.1007/978-3-7091-6384-9_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Parmar, Vipul, and Mitesh Panchal. "Design and Analysis of Reciprocating Screw for Injection Moulding Machine." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6469-3_53.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Marzuki, Mohammad Al Bukhari, Rafidah Laili Jaswadi, Abdul Razak Naina Mohamed, Mohamad Amirul Afzam Musa, and Mohammad Firdaus Mohammed Azmi. "Development of B-Segment SUV Rear Door Interior Trim Fixture for 2500 Ton Injection Moulding Machine." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0866-7_71.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Thiede, Sebastian, Tim Spiering, Stephan Kohlitz, Christoph Herrmann, and Sami Kara. "Dynamic Total Cost of Ownership (TCO) Calculation of Injection Moulding Machines." In Leveraging Technology for a Sustainable World. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29069-5_47.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cardin, Olivier, Pierre Castagna, Daniel Couedel, et al. "Energy-Aware Resources in Digital Twin: The Case of Injection Moulding Machines." In Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-27477-1_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gornik, Christian, and Jochen Perko. "Comprehensive Wear Study on Powder Metallurgical Steels for the Plastics Industry, Especially Injection Moulding Machines." In Progress in Powder Metallurgy. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.657.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"3 Injection moulding machinery." In Injection Moulding. De Gruyter, 2020. http://dx.doi.org/10.1515/9783110654813-003.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Injection moulding machine"

1

G, Tosello, Hansen H. N., and Guerrier P. "Process Condition Monitoring of Micro Moulding using a Two-plunger Micro Injection Moulding Machine." In 7th International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2010. http://dx.doi.org/10.3850/978-981-08-6555-9_136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

B.R, Whiteside, Tunea-Bobe C. L, and Coates P. D. "Characterising the Injection Kinetics of a Microinjection Moulding Machine." In 9th International Conference on Multi-Material Micro Manufacture. Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-3353-7_330.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pierleoni, Paola, Lorenzo Palma, Alberto Belli, and Luisiana Sabbatini. "Using Plastic Injection Moulding Machine Process Parameters for Predictive Maintenance Purposes." In 2020 International Conference on Intelligent Engineering and Management (ICIEM). IEEE, 2020. http://dx.doi.org/10.1109/iciem48762.2020.9160120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Veligorskyi, Oleksandr, Roustiam Chakirov, Maksym Khomenko, and Yuriy Vagapov. "Artificial Neural Network Motor Control for Full-Electric Injection Moulding Machine." In 2019 IEEE International Conference on Industrial Technology (ICIT). IEEE, 2019. http://dx.doi.org/10.1109/icit.2019.8755023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Reddy, B. Sudheer, K. Arun, and Dr M. Chandra Sekhara Reddy. "Optimization of Process Parameters on Injection Moulding Machine with LLDPE Reinforced Flyash using Taguchi." In National Conference on Trends in Engineering and Technology. AI Publications, 2017. http://dx.doi.org/10.22161/ijaers/nctet.2017.me.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Trotta, Gianluca, Vincenzo Bellantone, Rossella Surace, and Irene Fassi. "Effects of Process Parameters on the Properties of Replicated Polymeric Parts." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-71049.

Full text
Abstract:
The increasing demand for small and even micro scale parts is boosting the development of reliable micro system technologies. Micro-fabrication process capabilities should expand to encompass a wider range of materials and geometric forms, by defining processes and related process chains that can satisfy the specific functional and technical requirements of new emerging multi-material products, and ensure the compatibility of materials and processing technologies throughout these manufacturing chains. Micro injection moulding is the process of transferring the micron or even submicron precisio
APA, Harvard, Vancouver, ISO, and other styles
7

Moritzer, Elmar, Ellen Müller, Yannick Martin, and Rainer Kleeschulte. "Artificial neural networks to model formulation-property correlations in the process of inline-compounding on an injection moulding machine." In PROCEEDINGS OF PPS-30: The 30th International Conference of the Polymer Processing Society – Conference Papers. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4918476.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Moritzer, E., E. Müller, and R. Kleeschulte. "The influence of different screw concepts while processing fibre reinforced thermoplastics with the concept of inline-compounding on an injection moulding machine." In PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. American Institute of Physics, 2014. http://dx.doi.org/10.1063/1.4873758.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nguyen-Chung, Tham, Cindy Lo¨ser, Ines Ku¨hnert, and Ga´bor Ju¨ttner. "Thermal Contact Behaviour in Micro-Injection Moulding." In ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2008. http://dx.doi.org/10.1115/icnmm2008-62168.

Full text
Abstract:
Micro-injection moulding is one of the most efficient technologies for large-scale manufacturing of thermoplastic polymer micro parts. Growing demands for high precision require new concepts for moulding machines and micro moulds on the one hand and a better understanding of the process characteristics on the other hand. Especially, moulding micro features of high aspect ratios still remains a challenge due to the high surface-to-volume ratio of the part which makes the melt freeze-in much faster than in conventional injection moulding.
APA, Harvard, Vancouver, ISO, and other styles
10

Monzo´n, M. D., A. N. Beni´tez, P. Bordo´n, P. M. Herna´ndez, M. D. Marrero, and Fernando Ortega. "Design and Testing of Innovative Rotational Mould Heated by Thermal Fluid." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39781.

Full text
Abstract:
Rotomoulded plastic parts have no internal stresses, as it is a process carried out at lower temperatures than injection moulding and no pressure is applied. The main disadvantage is the high cycle times needed. This paper focuses on reducing this cycle time and in producing a mould using standardized parts. For cycle time reducing, it is proposed to heat the mould by thermal fluid in continuous circulation; heat transfer processes have been studied for over 20 different configurations of the oil’s inlet – outlet, obtaining acceptable results with a manifold with 25 perforations in the front a
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography