Relevant bibliographies by topics / Injection spectroscopy

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Injection spectroscopy'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Injection spectroscopy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Injection spectroscopy"

1

Wang, Joseph, and Lucio Angnes. "Batch Injection Spectroscopy." Analytical Letters 26, no. 11 (1993): 2329–39. http://dx.doi.org/10.1080/00032719308017473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ibrahim, H. "Flow injection atomic spectroscopy." Microchemical Journal 41, no. 1 (1990): 123. http://dx.doi.org/10.1016/0026-265x(90)90107-g.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pyen, Grace S., and Richard F. Browner. "Comparison of Flow Injection and Continuous Sample Introduction for Automatic Simultaneous Determination of As, Sb, and Se by Hydride Generation and Inductively Coupled Plasma Optical Emission Spectrometry." Applied Spectroscopy 42, no. 3 (1988): 508–12. http://dx.doi.org/10.1366/0003702884427816.

Full text
Abstract:
The determination of As, Sb, and Se using flow injection sample introduction, hydride generation, and inductively coupled plasma optical emission spectrometry has been studied. Measurements were made with the use of a simultaneous three-channel system and compared with continuous hydride generation using the same detection system. In general, peak signals obtained with the flow injection system, with 750-μL injections, were approximately three times lower than steady-state signals for the continuous introduction system. Detection limits obtained by flow injection (As, 3.5 μg/L; Se, 3.6 μg/L; S
APA, Harvard, Vancouver, ISO, and other styles
4

Tyson, Julian F., Zhang Li, Susan McIntosh, and Walter Slavin. "Flow injection techniques in atomic spectroscopy." Analytical Proceedings 29, no. 10 (1992): 436. http://dx.doi.org/10.1039/ap9922900436.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wirestam, R., V. Andrée Larsen, M. Stubgaard, et al. "Deuterium MR Spectroscopy at 4.7 T." Acta Radiologica 36, no. 1 (1995): 85–91. http://dx.doi.org/10.1177/028418519503600116.

Full text
Abstract:
Deuterium MR spectroscopy was used for the determination of tissue blood flow (TBF). The tracer D2O was injected into the tissue of interest, and tracer washout was followed using a 4.7 T spectroscopy/imaging unit. Normal subcutaneous tissue in rats was studied, as well as tissue influenced by vasoactive agents (papaverine and adrenaline). The vasoactive agents introduced changes of 40% in TBF, compared with normal tissue. Normal tissue measurements were repeated using various D2O injection volumes (5–400 μl). The injection volume 5 μl gave TBF 11.7 ± 2.0 ml/100 g·min (mean ± 1 SD). This value
APA, Harvard, Vancouver, ISO, and other styles
6

Ellmore, George, William Phair, Chris Gill, and David Skinner. "Fluid Delivery in Injected Ring-Porous Trees." Arboriculture & Urban Forestry 14, no. 10 (1988): 233–39. http://dx.doi.org/10.48044/jauf.1988.056.

Full text
Abstract:
In ring-porous trees such as elm, oak, and ash, trunk injections of fungicides for control of vascular wilts should be specifically directed to the single outermost growth ring of wood. It transports the most water and is the first to become infected by fungal wilts. Shallow-pit Injection taps into this target tissue and is enjoying widespread use among arborists and researchers. Evidence to its effectiveness comes from theoretical, laboratory, and clinical studies. The need now is to quantify spread of trunk-injected fungicide in the crown. Gas chromatography and mass spectroscopy clearly det
APA, Harvard, Vancouver, ISO, and other styles
7

Ngai, J., Y. C. Tseng, P. Morales, et al. "Scanning tunneling spectroscopy under pulsed spin injection." Applied Physics Letters 84, no. 11 (2004): 1907–9. http://dx.doi.org/10.1063/1.1667281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bowen, Sean, and Christian Hilty. "Rapid sample injection for hyperpolarized NMR spectroscopy." Physical Chemistry Chemical Physics 12, no. 22 (2010): 5766. http://dx.doi.org/10.1039/c002316g.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tsuchiya, Yutaka, Kazuyoshi Ohta, and Tsuneyuki Urakami. "Isotropic Photon Injection for Noninvasive Tissue Spectroscopy." Japanese Journal of Applied Physics 34, Part 1, No. 5A (1995): 2495–501. http://dx.doi.org/10.1143/jjap.34.2495.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bostrom, Greg, Andrew Rice, and Dean Atkinson. "Optical injection unlocking for cavity ringdown spectroscopy." Optics Letters 39, no. 14 (2014): 4227. http://dx.doi.org/10.1364/ol.39.004227.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Injection spectroscopy"

1

Katsikis, Sotirios. "Fast sample injection for dissolution dynamic nuclear polarisation NMR spectroscopy." Thesis, University of Birmingham, 2016. http://etheses.bham.ac.uk//id/eprint/6577/.

Full text
Abstract:
Introduction: One of the most critical problems of NMR is the intrinsic lack of sensitivity owing to the small energy difference between nuclear energy levels. This issue can be addressed in different ways. One possibility is to reduce the spectral noise, which to a large extent is created by the console electronics. Another approach is to actually increase the signal strength of the NMR signal. An experimental approach to achieve this is ex situ dissolution Dynamic Nuclear Polarisation. It increases the population difference of the spin states by transferring the high electron polarization to
APA, Harvard, Vancouver, ISO, and other styles
2

Erickson, Brice Carl. "Multicomponent flow injection analysis and quantitative infrared emission spectroscopy : chemometric applications /." Thesis, Connect to this title online; UW restricted, 1988. http://hdl.handle.net/1773/8633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Гринько, Д. О., Д. О. Гринько, D. O. Grynko, et al. "Injection Spectroscopy of Deep Traps in Nanostructured Films of Cadmium Sulfide." Thesis, Sumy State University Publishing, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33901.

Full text
Abstract:
Nanocrystallin CdS films with controlled stoichiometry deposited by CSVS were investigated by meth- od of the current-voltage characteristics in ITO/CdS /In structures. It was shown that in the case of cadmi- um excess (S <Cd) charge flow mechanism both in the dark and under illumination is determined by bimo- lecular recombination in the material. In the case of excess sulfur (S>Cd) charge flow mechanism is deter- mined by monomolecular recombination. In the band gap of CdS with excess of cadmium there was detected localized states with energy Et = 0.514 ± 0.026 eV, while in the material
APA, Harvard, Vancouver, ISO, and other styles
4

Grynko, D. O., O. P. Dimitriev, P. S. Smertenko, et al. "Injection Spectroscopy of Deep Traps in Nanostructured Films of Cadmium Sulfide." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35240.

Full text
Abstract:
Nanocrystallin CdS films with controlled stoichiometry deposited by CSVS were investigated by meth-od of the current-voltage characteristics in ITO/CdS /In structures. It was shown that in the case of cadmi-um excess (S <Cd) charge flow mechanism both in the dark and under illumination is determined by bimo-lecular recombination in the material. In the case of excess sulfur (S>Cd) charge flow mechanism is deter-mined by monomolecular recombination. In the band gap of CdS with excess of cadmium there was detect-ed localized states with energy Et = 0.514 ± 0.026 eV, while in the material with Ex
APA, Harvard, Vancouver, ISO, and other styles
5

Sims, Gary Robert. "Characterization of a charge injection device detector for atomic emission spectroscopy." Diss., The University of Arizona, 1989. http://hdl.handle.net/10150/184735.

Full text
Abstract:
A Charge Injection Device (CID) detector has been evaluated as a detector for simultaneous multielement atomic emission spectroscopy. The CID was incorporated into a special liquid nitrogen cooled, computer controlled camera system. Electro-optical characterization of the CID and camera system included determination of readout noise, quantum efficiency, spatial crosstalk, temporal hysteresis, spatial response uniformity, and linear dynamic range. The CID was used as a spectroscopic detector for an echelle grating spectrometer equipped with a direct current plasma emission source. The spectrome
APA, Harvard, Vancouver, ISO, and other styles
6

Pilon, Michael Joseph. "Inductively coupled plasma atomic emission spectroscopy using charge injection device detection." Diss., The University of Arizona, 1991. http://hdl.handle.net/10150/185630.

Full text
Abstract:
A unique echelle spectrometer system employing charge injection device (CID) array detectors for use in inductively coupled plasma atomic emission spectroscopy (ICP-AES) is described. The echelle spectrometer described offers numerous advantages over previous systems including improved light throughput and extended wavelength coverage including the vacuum-ultraviolet (VUV) down to 165 nm. Several improvements in CID array detector technology are also described. Low exposure level linearity is improved and full well capacity is increased by fabricating the CIDs with <100> silicon as opposed to
APA, Harvard, Vancouver, ISO, and other styles
7

Chakrabarty, Chitra L. "Figures of merit for a direct injection nebulizer for flow injection analysis and liquid chromatography with inductively coupled plasma spectrometric detection." Virtual Press, 1990. http://liblink.bsu.edu/uhtbin/catkey/722785.

Full text
Abstract:
A direct injection nebulizer was constructed in our laboratory and was evaluated as an interface between a liquid chromatography column and an inductively coupled plasma-atomic emission spectrometer (ICP-AES). Optimum operating conditions, detection limits, and reproducibility in water and in organic solvents were studied. The detection limits in water were similar to a commercially available device. The detection limits of elements in organic solvents were about ten times higher than those in water. The DIN-ICP system stave more uniform response towards different species of Phosphorus and osm
APA, Harvard, Vancouver, ISO, and other styles
8

Shah, Pranjal Kiran. "Adhesion of Injection Molded PVC to Silane Primed Steel." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1122319669.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wells, Ian. "Flow injection, vibrational spectroscopy and multivariate calibration techniques for on-line process monitoring." Thesis, University of Plymouth, 1996. http://hdl.handle.net/10026.1/1877.

Full text
Abstract:
The fundamental concepts of process analytical chemistry are presented in Chapter One, which also discusses the different approaches and advantages of performing process analysis in-situ. The principles and instrumentation of flow injection analysis are presented with particular emphasis on multi-detemiinations and process applications. Flow injection analysis with Fourier transform infrared detection is proposed as a potential on-line monitoring technique highlighting its ability for simultaneous multi-analyte determinations. The principles of chemometric data analysis are summarised in Chapt
APA, Harvard, Vancouver, ISO, and other styles
10

Lamoureux, Burton Richard. "Charge injection device array detection for atomic spectroscopy with applications in gas chromatography." Diss., The University of Arizona, 1990. http://hdl.handle.net/10150/185261.

Full text
Abstract:
Very early in the history of atomic emission spectroscopy (AES) it was understood to be a powerful analytical tool. Until the 1930's the usefulness of atomic spectroscopy was not utilized very extensively even though its fundamental power was understood. The breakthrough that placed it in the standard chemistry laboratory was the discovery and implementation of the photoelectric effect. Since this discovery there has been a revolution in atomic spectroscopy which has brought it from the role of a humble servant used for primary elemental screening to an outstanding leader in applications of el
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Injection spectroscopy"

1

L, Burguere José, ed. Flow injection atomic spectroscopy. M. Dekker, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Thompson, M. M. Development of infrared methods for characterization of inorganic sulfur species related to injection desulfurization processes. U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ruiz, Antonio. Flow through optosensors. Nova Science Publishers, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Flow injection atomic absorption spectrometry. Wiley, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Flow analysis with atomic spectrometric detectors. Elsevier Science, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Worsfold, Paul, Alan Townshend, Elias Ayres Guidetti Zagatto, and Claudio C. Oliveira. Flow Analysis with Spectrophotometric and Luminometric Detection. Elsevier, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rayment, George E., and David J. Lyons. Soil Chemical Methods - Australasia. CSIRO Publishing, 2010. http://dx.doi.org/10.1071/9780643101364.

Full text
Abstract:
Soil Chemical Methods – Australasia describes over 200 laboratory and field chemical tests relevant to Australasia and beyond. The information and methodology provided across 20 chapters is comprehensive, systematic, uniquely coded, up-to-date and designed to promote chemical measurement quality. There is guidance on the choice and application of analytical methods from soil sampling through to the reporting of results. In many cases, optional analytical ‘finishes’ are provided, such as flow-injection analysis, electro-chemistry, multiple flame technologies, and alternatives to chemical testin
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Injection spectroscopy"

1

Valcárcel, M., and M. D. Luque de Castro. "Fluorescence Detection in Flow Injection Analysis." In Fluorescence Spectroscopy. Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-77372-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hankemeier, Thomas, Udo Brinkman, Marjo Vredenbregt, and Tom Visser. "Trace Analysis GC-IR by Injection of Large Sample Volumes." In Progress in Fourier Transform Spectroscopy. Springer Vienna, 1997. http://dx.doi.org/10.1007/978-3-7091-6840-0_189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Nouros, Panayotis G., Constantinos A. Georgiou, and Moschos G. Polissiou. "Automated Flow Injection Spectrophotometric Determination of Olive Oil Free Fatty Acid Content and Comparison with FT-IR Method." In Spectroscopy of Biological Molecules: Modern Trends. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5622-6_225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Voslamber, Dietrich, and Wilhelm Mandl. "Measurement of the H/D/T Mixture Based on Doppler-Free Two-Photon Spectroscopy and Neutral Beam Injection." In Diagnostics for Experimental Thermonuclear Fusion Reactors 2. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5353-3_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Neftel, A., A. Blatter, and T. Staffelbach. "Gas phase measurements of NH3and NH4 ± with Differential Optical Absorption Spectroscopy and Gas Stripping Scrubber in combination with Flow Injection Analysis." In Physico-Chemical Behaviour of Atmospheric Pollutants. Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-009-0567-2_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kontar, Eduard P., John C. Brown, and Guillian K. McArthur. "Nonuniform Target Ionization and Fitting Thick Target Electron Injection Spectra to RHESSI Data." In The Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI). Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-3452-3_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jones, Amanda C. "Spectroscopic Advances in Organolithium Reactivity: The Contribution of Rapid-Injection NMR (RINMR)." In Lithium Compounds in Organic Synthesis. Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527667512.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bourcerie, M., J. C. Marchetaux, A. Boudou, and D. Vuillaume. "Electrical and Optical Spectroscopic Characterization of Oxide Traps Induced by Hot Hole Injection." In ESSDERC ’89. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52314-4_113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Faubel, Manfred. "Liquid Micro Jet Studies of the Vacuum Surface of Water and of Chemical Solutions by Molecular Beams and by Soft X-Ray Photoelectron Spectroscopy." In Molecular Beams in Physics and Chemistry. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63963-1_26.

Full text
Abstract:
AbstractLiquid water, with a vapor pressure of 6.1 mbar at freezing point, is rapidly evaporating in high vacuum, rapidly cooling off by the evaporative cooling, and is freezing to ice almost instantly. Nevertheless, liquid water free vacuum surfaces can be prepared for short instances when injecting very small, fast flowing, liquid jets into high vacuum. They provide perfectly suited targets for molecular beams analysis of molecular evaporation of monomers and dimers from liquids. Also, the microjet technology allows ultrahigh vacuum studies of atomic scale liquid surface composition and elec
APA, Harvard, Vancouver, ISO, and other styles
10

Hamzah, Afiqah, Ghazali Omar, and Mohd Zaid Akop. "Spectroscopy Analysis of Diesel Injector Hole Deposits Using Palm Methyl Ester-Diesel Blends in a Constant Speed Diesel Engine." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-3179-6_76.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Injection spectroscopy"

1

Bouchhima, Mejda, Oumaima Bader, Mariem Hafsa, Salwa Sahnoun, Najoua Essoukri Ben Amara, and Olfa Kanoun. "Evaluation of Adjacent and Opposite Current Injection Patterns for 3D Image Reconstruction of the Human Lung Based on a Realistic Model." In 2024 International Workshop on Impedance Spectroscopy (IWIS). IEEE, 2024. https://doi.org/10.1109/iwis63047.2024.10847107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fried, Michael, and Dag Roar Hjelme. "Novel tunable diode laser spectroscopy with square wave injection current modulation and simple calibration." In Photonic Instrumentation Engineering XII, edited by Yakov Soskind and Lynda E. Busse. SPIE, 2025. https://doi.org/10.1117/12.3042891.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Grigorescu, Ioana C., and Gladys Navas. "Damage Mechanisms in Multistage Pumps for Water Injection." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01676.

Full text
Abstract:
Abstract A detailed surface evaluation was performed for the components of two multistage centrifugal pumps for water injection in a Venezuelan oil production field. Several non-destructive methods were employed: visual inspection, die penetrant and replica extraction, followed by micro-morphological and chemical analysis by scanning electron microscopy (SEM) and energy dispersive X ray spectroscopy (EDX). The flow-induced degradation mechanisms varied depending on the pump component and their ranking, according to damage intensity, from high to low, was: i) severe erosion-corrosion in the bal
APA, Harvard, Vancouver, ISO, and other styles
4

Akrasi, Itoro L., Mohammad S. Hamaqi, Tawfiq I. Hathloul, Abdullah F. Almakinzi, and Anthony T. Manuel. "Field Experience Identifying and Investigating Internal Coating Failure in Water Injection Piping." In CORROSION 2019. NACE International, 2019. https://doi.org/10.5006/c2019-13550.

Full text
Abstract:
Abstract To mitigate the effect of highly corrosive water injection media (aquifer water), which has a very high total dissolve solid (TDS) value with high oxidizing agents, internal fusion bonded epoxy (FBE) coatings, in addition to corrosion inhibitor were used to provide internal corrosion protection of water injection plant piping. A year after start-up of water injection plant (WIP), the plant piping started experiencing internal FBE coating failure. The failed coatings were found at the strainer and recycle valve after causing high differential pressure during operation. Seven different
APA, Harvard, Vancouver, ISO, and other styles
5

Elboujdaini, M., and V. S. Sastri. "Field Studies of Microbiological Corrosion in Water Injection Plant." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95213.

Full text
Abstract:
Abstract Electrochemical impedance, weight loss and potentiodyne techniques were used to determine the corrosion rates of carbon steel along with the determination of activities of both sulphate-reducing bacteria (SRB) and acid-producing bacteria (APB) in a water injection field test facility. Corrosion rates determined by the potentiodyne technique did not correlate with the bacterial activity. Corrosion rates obtained by electrochemical impedance spectroscopy (EIS) were comparable to the rates obtained by weight loss measurements. The average corrosion rates obtained by EIS paralleled the cu
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Hongbin, David Fell, and Steven Bailey. "Corrosion and Inhibition Study for a H2S Containing Water Injection System: a Field Investigation Using Electrochemical Techniques." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08644.

Full text
Abstract:
Abstract The corrosion and inhibition scenario in the system was complicated by the iron sulfide scaling issue which was a result of mixing different H2S containing waters. This paper presents the preliminary results of a field investigation using both electrochemical impedance spectroscopy (EIS) and Linear Polarization Resistance (LPR) Measurement.
APA, Harvard, Vancouver, ISO, and other styles
7

Yoo, Hyung Keun, Youngwoon Yoon, Hanju Lee, et al. "Angle-dependent carrier injection in copper phthalocyanine thin films." In Nano-Bio Sensing, Imaging and Spectroscopy, edited by Shin Won Kang, Seung-Han Park, Luke P. Lee, Ki-Bong Song, and Yo Han Choi. SPIE, 2013. http://dx.doi.org/10.1117/12.2018560.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kosan, Nicholas, Baichuan Huang, and Gerard Wysocki. "Coherent Control of Quantum Cascade Laser Frequency Combs via External Cavity Optical Feedback." In Applied Industrial Spectroscopy. Optica Publishing Group, 2023. http://dx.doi.org/10.1364/ais.2023.jth3a.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ahrenkiel, R. K., and S. W. Johnston. "Large-signal injection-level spectroscopy of impurities in silicon." In National center for photovoltaics (NCPV) 15th program review meeting. AIP, 1999. http://dx.doi.org/10.1063/1.57994.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Schüler, Nadine, Kay Dornich, and Jürgen R. Niklas. "Injection dependent lifetime spectroscopy with a varying pulse length." In INTERNATIONAL CONFERENCE ON DEFECTS IN SEMICONDUCTORS 2013: Proceedings of the 27th International Conference on Defects in Semiconductors, ICDS-2013. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4865637.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Injection spectroscopy"

1

Faris, G., and M. Dyer. Injection-seeded Nd:YAG laser linewidth measurement using saturation spectroscopy in iodine. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/7199613.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Injection spectroscopy' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography