Relevant bibliographies by topics / Installation process

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Installation process'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Installation process.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Installation process"

1

Di Maro, Daniela, Andrea Bene, Diego Bernini, Simone Bonetti, Giorgio De Michelis, Francesco Tisato, and Gianluca Colombo. "Anastatica Sensibile - Grounding Interactivity on a Natural Process." Leonardo 47, no. 5 (October 2014): 502–3. http://dx.doi.org/10.1162/leon_a_00823.

Full text
Abstract:
Interactive artistic installations represent avant-garde forms of Contemporary Art. They are artistic works able to change their behavior in response to the behavior of the viewers, turning them into (more or less) active participants. This paper discusses an interactive installation the authors developed during the beginning of 2012 for the St. Elmo Castle in Naples, Italy. In this installation the audience determines the evolution of the life cycle of specific plants, in terms of an opening/closing process. The paper proposes some reflections on this case study, especially about the engagement dimension promoted by the work.
APA, Harvard, Vancouver, ISO, and other styles
2

Rathore, Neeraj. "GridSim Installation and Implementation Process." i-manager's Journal on Cloud Computing 2, no. 4 (October 15, 2015): 23–34. http://dx.doi.org/10.26634/jcc.2.4.4906.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Dong, Yongbin Li, Tiejun Li, Tian Zhang, Ming Han, and Han Yan. "The system design of external cladding installation robot." International Journal of Advanced Robotic Systems 17, no. 6 (November 1, 2020): 172988142096906. http://dx.doi.org/10.1177/1729881420969062.

Full text
Abstract:
In the installation process of large-scale external cladding, the labor intensity is high, and it is dangerous and hard to guarantee good construction quality. In view of these issues, this study designs a construction robot for external cladding installation, as a better solution. First, the advantages and disadvantages of the current building external cladding hanging process are discussed. The components, suitable for automatic installation, are selected to develop an automatic installation process for the building external cladding. According to the process steps and installation action flow, the installation robot is first adjusted. After the design of a step-by-step workflow of positioning and installation, a robot with a six-degree-of-freedom string-mixing mechanism is designed. Finally, a prototype of the proposed external cladding installation robot is developed, and the system is experimentally verified under simulation conditions and real operation. The test results show that the external cladding installation robot system has a strong theoretical basis. The series-parallel hybrid six-degree-of-freedom structure is reasonable, design wise. It helps to complete the automatic installation of the building external cladding and improve the automation level of large-scale plate installations.
APA, Harvard, Vancouver, ISO, and other styles
4

Гонтарев, С., S. Gontarev, Сергей Мошаров, Sergey Mosharov, М. Корсак, and M. Korsak. "Novel Way for Continuous Filtration of Large Volumes of Water in Environmental Monitoring System." Safety in Technosphere 6, no. 3 (October 17, 2017): 13–17. http://dx.doi.org/10.12737/article_59d3a1993a6f61.46420059.

Full text
Abstract:
During ecological researches and monitoring of the natural aquatic environment it is very often necessary to carry out filtration of water large volumes for extraction on filters the weighed components, and for subsequent analysis of mineral and organic suspension’s structure. The installations applied now for vacuum filtration have a number of essential restrictions. The most important deficiency of existing installations for vacuum filtration is the use of a leak-tight receiver with rigid design. At intensive filtration such receiver has to have a large volume that limits filtration installation’s possibilities for transportation and afield operation. Need of a vacuum pump’s protection against a filtrate intrusion demands constant monitoring for receiver filling at the large filtration volume. During receiver filling the filtration process needs to be interrupted for filtrate removal from the receiver, but sometimes such interruption significantly complicates the filtration process. In this paper is described the developed new mobile installation for continuous vacuum filtration based on a closed cycle water-jet pump for vacuum generation. The proposed installation for vacuum filtration of natural water’s weighed components allows carry out filtration of water large volumes in the continuous mode. The installation hasn’t a leak-tight vacuum receiver so that it has small dimensions.
APA, Harvard, Vancouver, ISO, and other styles
5

Lutsenko, Mariia, Oksana Halai, Victor Legkoduh, Iryna Lastovska, Oleksandr Borshch, and Valentyna Nadtochii. "Milk production process, quality and technological properties of milk for the use of various types of milking machines." Acta Scientiarum. Animal Sciences 43 (May 14, 2021): e51336. http://dx.doi.org/10.4025/actascianimsci.v43i1.51336.

Full text
Abstract:
Studies have been carried out to evaluate the efficiency of using easy-assembled cow houses in modern milk production technologies for the use of high-productive milking plants of the type ‘Parallel’ and ‘Carousel’ with 32 machines each. It has been established that new types of premises not only provide comfortable conditions for the maintenance of highly productive cows, but also reduce the labor costs for their maintenance and, most importantly, allow the use of modern high-productive milking installations of the type ‘Parallel’ and ‘Carousel’. It has been established that the technology of preparation of cows for milking and milking technology provides more complete display of the milk ejection reflex at the installation of the ‘Parallel’ type. The average intensity of cows’ milk flows at this plant is 30% higher compared to those of the installation of ‘Carousel’ type, which is confirmed by the intensity of milk flow production at the first minute of milking, which is at the level of 2.97 against 1.85 kg min.-1 per installation of ‘Carousel’ type. Milk obtained using a milking installation of the ‘Parallel’ type has higher values of the mass fraction of fat and protein that is associated with the genetic potential of animals. According to physical, chemical and technological properties, milk obtained from milking installations such as ‘Parallel’ and ‘Carousel’ is within the limits of the standards in force. Milk obtained from the use of milking equipment such as ‘Carousel’ has higher electrical conductivity at the level of 4.6 mS cm-3, which is confirmed by a higher level of mastitis disease of cows. Due to bacterial contamination, reductase test and milk clot characteristic, milk obtained using a milk installation of ‘Parallel’ type also has higher quality indicators than the installation of ‘Carousel’ type. But according to the complex of indicators, milk obtained from various technologies of milking refers to the desired cheese-making class.
APA, Harvard, Vancouver, ISO, and other styles
6

Baha II, Samuel, and Olaf Hesebeck. "Simulation of the Solid Rivet Installation Process." SAE International Journal of Aerospace 3, no. 1 (September 28, 2010): 187–97. http://dx.doi.org/10.4271/2010-01-1843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

YAMAMOTO, Yukiko, and Shinji IKARUGA. "LANDSCAPE CHARACTERISTICS OF INSTALLATION SPACE FROM THE OPEN-AIR SCULPTURE INSTALLATION PROJECT PROCESS." Journal of Architecture and Planning (Transactions of AIJ) 75, no. 653 (2010): 1697–706. http://dx.doi.org/10.3130/aija.75.1697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Jing. "Method of the Safety Early Warning on Hazard Installations." Applied Mechanics and Materials 34-35 (October 2010): 806–10. http://dx.doi.org/10.4028/www.scientific.net/amm.34-35.806.

Full text
Abstract:
The early warning can improve the monitoring and management of the hazard installations, realize the prevention and control in advance. Many early warning methods do not have the forecast and simulation of the hazard consequences and early warning information is not comprehensive. The hazard installations warning process and hazard assessment technology are analyzed and studied, and qualitative analysis and quantitative analysis are carried out. With the effective combination of hazard consequences and early warning technology, the processing system of hazard installation early warning process information is presented, the hazard installation early warning information processing model is designed, the hazard installation early warning is improved, and the accuracy and efficiency of early warning is improved. With examples, the hazard consequences of leak and diffusion are simulated. Experiments prove that the early warning simulation structure and early warning method are effective, and that the simulation results are close to the actual situation with better application value.
APA, Harvard, Vancouver, ISO, and other styles
9

Borisenko, A. B., V. V. Khramtsov, V. A. Nemtinov, A. V. Krylov, and M. A. Matrokhin. "Designing a Chemical Nickel Plating Unit Operating as Part of a Galvanic Line." Vestnik Tambovskogo gosudarstvennogo tehnicheskogo universiteta 27, no. 2 (2021): 275–84. http://dx.doi.org/10.17277/vestnik.2021.02.pp.275-284.

Full text
Abstract:
The paper presents the results of the analysis of the requirements for process equipment for chemical nickel plating of metal products, including carbon steels, titanium, aluminum and their alloys. The disadvantages of standard equipment (UKhN series installations, functioning as a separate process unit) during its operation as part of a galvanic line are listed. The results of the design development of an improved installation for chemical nickel plating of metal products with repeated use of the solution are presented. The testing of the installation under the conditions of a galvanic section of a real mechanical production has shown its high efficiency.
APA, Harvard, Vancouver, ISO, and other styles
10

Camacho, Javier, Fernando Veiga, Mari Luz Penalva, Alberto Diez-Olivan, Lutz Deitert, and Norberto López de Lacalle. "On-Line Monitoring of Blind Fastener Installation Process." Materials 12, no. 7 (April 10, 2019): 1157. http://dx.doi.org/10.3390/ma12071157.

Full text
Abstract:
Blind fasteners are of special interest for aircraft construction since they allow working on joints where only one side is accessible, as is the case in many common aerospace box-type structures, such as stabilizers and flaps. This paper aims to deliver an online monitoring method for the detection of incorrect installed blind fasteners. In this type of fastener, the back side of the assembly is not accessible, so monitoring the process installation is suitable as a system to assess the formed head at the back side with no access. The solution proposed consists of an on-line monitoring system that is based on sensor signals acquired during the installation. The signals are conveniently analyzed in order to provide an evaluation outcome on how the fastener was installed. This new method will help production to decrease/eliminate time and cost-intensive inspections and fasteners over installation in structures. The decrease of the number of installed fasteners will also contribute to weight savings and will reduce the use of resources.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Installation process"

1

OWAIS, MUHAMMAD. "Management of risks in Engine Installation Process." Thesis, KTH, Tillämpad maskinteknik (KTH Södertälje), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-204887.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Walker, Richard Thomas. "Installation optimisation for marine energy converters to inform the designation process." Thesis, University of Exeter, 2013. http://hdl.handle.net/10871/14730.

Full text
Abstract:
Whilst a number of methods exist for the analysis of site availability and weather downtime via metocean exceedance, there is little available for the detailed analysis of holistic marine energy installation projects. Given the magnitude of expenditure relating to the installation phase of marine energy extraction it is essential that significant cost reduction is achieved in this area. This thesis presents methods for the analysis of marine operations, considering not just the at site work but the project as a whole. The methods developed consider multiple facets of installation in a geo-spatially diverse environment and utilize multiple resources, for example vessels. Consideration of not only the efficiency of work at site, but also the accessibility of the site due to vessel station keeping, mooring and transit limits is included. By considering the project in its entirety work may be scheduled in a realistic manner; including simultaneous operations and at site transit to any of multiple working locations. These methods, packaged as a whole, represent a valuable new tool for utilisation in this area. Novel application of the methods developed is demonstrated and highlights the value, importance and power of this type of analysis. Two marine energy installations are considered as case studies; the Wave Hub in south west England, and a tidal installation at the European Marine Energy Centre in Orkney. These applications demonstrate the knowledge which may be gained and, explicitly in the latter case, the significant cost reductions which may be achieved through the essential optimisation of the installation operations using this newly developed analysis tool.
APA, Harvard, Vancouver, ISO, and other styles
3

O, Donnell Sarah. "Tracing a Process." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1339194276.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Turner, Blake C. "Determining Process: An Analysis of Corridor #1." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1460630059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Poudyal, Bidusha. "Predictive analysis of installation and operational qualification issues vs. process severity events." Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/126913.

Full text
Abstract:
Thesis: M.B.A., Massachusetts Institute of Technology, Sloan School of Management, in conjunction with the Leaders for Global Operations Program at MIT, May, 2020
Thesis: S.M., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, in conjunction with the Leaders for Global Operations Program at MIT, 2020
Cataloged from the official PDF of thesis.
Includes bibliographical references (pages 81-82).
As the retail industry grows more popular, ABCD, a world-class electronic commerce (e-commerce) business, is increasingly building new Fulfillment Centers (FCs) to support this rapid demand growth. It is integral for ABCD to validate the installation quality and functionality of Material Handling Equipment (MHE) in these newly built FCs so operations can avoid errors. To achieve this objective, ABCD introduced the Installation and Operational Qualification (IOQ) process in late 2014. While the IOQ process reduces early operational failures, it does not completely eliminate them. Inadequate IOQ and tighter installation timelines are leading to degraded installation quality, resulting in operational issues and costs for ABCD. As the FC network continues to grow, there is a need to improve installation quality to reduce early operational issues and enhance the FC start-up experience.
This project is a part of the ABCD Operation Engineering teams' effort to improve the existing IOQ process and the FC start-up experience. This initiative consists of three main phases. The first phase - the research phase - is dedicated to understanding the current processes and problem statement. It also includes a study of available data sources to discover failure patterns across different FCs. The second phase involves developing analytical frameworks and machine-learning models to uncover the most problematic equipment in the FC. The third phase focuses on evaluating the effectiveness of the current IOQ process based on Phase 1 and 2 findings, and identifying opportunities to better the process. The thesis summarizes the outcomes from all of these phases. The project focuses on improving IOQ coverage, efficiently reprioritizing the testing schedule, introducing threshold metric for installation quality, and exploring predictive and preventative maintenance opportunities.
This thesis also includes recommendations for refining the data-gathering process to improve future model outcomes. The ultimate goal is to improve FC installation quality and enhance the IOQ process to eliminate start-up issues. The approach taken and the recommendations proposed seek to approximate the ideal state as closely as possible. Incremental adoption of these recommendations will help deliver better-installed FCs, reduce early operational issues, improve start-up experiences, and strengthen ABCD's infrastructure.
by Bidusha Poudyal.
M.B.A.
S.M.
M.B.A. Massachusetts Institute of Technology, Sloan School of Management
S.M. Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science
APA, Harvard, Vancouver, ISO, and other styles
6

Toth, Ibojka Maria. "Borderland American - Hungarian video installation /." [Kent, Ohio] : Kent State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=kent1165764619.

Full text
Abstract:
Thesis (M.F.A)--Kent State University, 2006.
Title from PDF t.p. (viewed March 27, 2008). Advisor: Martin Ball. Keywords: American - Hungarian Video Installation, 1956 Hungarian Revolution, Budapest, Hungary, Documentary - Style Production Process, Fragmented Memories of Time and Place, American - Hungarian Struggles with Personal and Cultural Identities, Discourse about Mul.
APA, Harvard, Vancouver, ISO, and other styles
7

Vásquez, Chicata Luis Fernando Gonzalo. "Computational procedure for the estimation of pile capacity including simulation of the installation process /." Full text (PDF) from UMI/Dissertation Abstracts International, 2000. http://wwwlib.umi.com/cr/utexas/fullcit?p3004390.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wylde, Nanette. "A brief history... interactive multimedia art installation: discussion of process, media, content, and response." The Ohio State University, 1996. http://rave.ohiolink.edu/etdc/view?acc_num=osu1384359452.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Acharjee, Tapas. "Investigating Accumulation of Tolerances and its Impact on Reliability of Job Site Installation." University of Cincinnati / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1172857125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Canovas, Samantha Sobreira. "Frangalhos." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/27/27159/tde-02102017-154504/.

Full text
Abstract:
Buscando combinar diversos estilos de escrita incluindo narrativas ficcionais, relatos pessoais e artigos, a presente dissertação reflete sobre a minha prática artística no âmbito da pintura, da instalação e do têxtil. O texto levanta reflexões poéticas acerca de conceitos como: materialidade, obsessão, ócio, método e deriva. Através de uma série de textos curtos a dissertação pretende discutir a minha produção poética, tornando-se outra dimensão do trabalho prático.
Seeking to combine diverse styles of writing including fictional narratives, personal reports and articles, the present dissertation reflects on my artistic practice in the scope of painting, installation and the textile. The text raises poetic reflections about concepts such as: materiality, obsession, idleness, method and drift. Through a series of short texts the dissertation intends to discuss my poetic production, becoming another dimension of practical work.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Installation process"

1

Bacon, John M. Instrumentation installation: Project management system. Research Triangle Park, N.C: Instrument Society of America, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chrystall, Christopher Neil. The evaluation and installation of a computer based process simulation tool. Portsmouth: Portsmouth Polytechnic, School of Management Studies, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

McMillan, Gregory K. Essentials of modern measurements and final elements in the process industry: A guide to design, configuration, installation, and maintenance. Research Triangle Park, NC: ISA, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

America, Instrument Society of, ed. Essentials of modern measurements and final elements in the process industry: A guide to design, configuration, installation, and maintenance. Research Triangle Park, NC: ISA, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

McMillan, Gregory K. Essentials of modern measurements and final elements in the process industry: A guide to design, configuration, installation, and maintenance. Research Triangle Park, NC: ISA, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Killcross, Martin. Chemical and process plant commissioning handbook: A practical guide to plant system and equipment installation and commissioning. Amsterdam: Elsevier/Butterworth-Heinemann, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gross, Carmela, and Aracy A. Amaral. De Brasil: Alquimias y procesos. Santafé de Bogotá, D.C: Biblioteca Luis Ángel Arango, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

American Water Works Association. Organic Contaminants Control Committee. Committee report: Existing VOC treatment installations : design, operation, and cost. Denver, CO: American Water Works Association, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ksenz, Nikolay, Boris Cheba, and Igor' Yudaev. Electroactivation of media in agricultural technologies as a way to intensify production processes. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1154383.

Full text
Abstract:
The monograph examines the scientific foundations, methodological approaches and applied aspects of the electroactivation of air and water solutions for their direct use in various technological processes of agricultural production. The results of numerous experimental studies of the authors and other researchers conducted over several years to substantiate the parameters and operating modes of electrotechnological installations for the electrical activation of various media are presented. It is intended for undergraduates, postgraduates, engineers and researchers who study and deal with issues of electrical technology, in particular, the development of electroactivators and the use of electroactivation processes in various areas of agricultural production and processing of agricultural products.
APA, Harvard, Vancouver, ISO, and other styles
10

Nee, Michael J. Heat exchanger engineering techniques: Process, air conditioning, and electronic systems : a treatise on heat exchanger installations that did not meet performance. New York: ASME Press, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Installation process"

1

Hammon, Gary L. "Understanding the Purchasing and Installation Process." In Healthcare Information Management Systems, 236–43. New York, NY: Springer New York, 1995. http://dx.doi.org/10.1007/978-1-4757-2402-8_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hammon, Gary L. "Understanding the Purchasing and Installation Process." In Healthcare Information Management Systems, 337–44. New York, NY: Springer New York, 1991. http://dx.doi.org/10.1007/978-1-4757-4043-1_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kugler, Stefan, Cordula Czwick, Hoang Phuong Linh Nguyen, and Reiner Anderl. "Method for the Targeted Selection and Installation of an IoT - Platform." In Advances in Manufacturing, Production Management and Process Control, 116–23. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80462-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Muniak, Damian Piotr. "Aim of the Process of a Hydronic Heating Installation Control and Regulation." In Regulation Fixtures in Hydronic Heating Installations, 1–3. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03128-2_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ker, Jun-Ing, and Yichuan Wang. "Applying the Principles of Lean Manufacturing to Optimize Conduit Installation Process." In Intelligent Technologies and Engineering Systems, 923–29. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-6747-2_107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Blázquez, Cristina Sáez, Ignacio Martín Nieto, Arturo Farfán Martín, and Diego González-Aguilera. "Optimization of the Dimensioning Process of a Very Low Enthalpy Geothermal Installation." In Smart Cities, 179–91. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12804-3_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Beinke, Thies, Abderrahim Ait Alla, and Michael Freitag. "Resource and Information Sharing for the Installation Process of the Offshore Wind Energy." In Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing, 268–75. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-66926-7_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Burghardt, M., G. J. Mulder, and R. Kabos. "Quality Assurance and Quality Control During the Installation Process of a Vertical Slurry Wall of Plastic Concrete." In Soil & Environment, 723–24. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0415-9_193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Foissac, Charly, Alain Daidie, Stephane Segonds, and Clément Chirol. "Smart Tightening Development for Aeronautical Bolted Assemblies in an Industry 4.0." In Lecture Notes in Mechanical Engineering, 419–25. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_66.

Full text
Abstract:
AbstractSmart tightening development is part of the Industry 4.0 transformation with the introduction of smart tools, and preload in bolted assemblies is of major interest in today’s aircraft manufacturing process. So far, it has been difficult to estimate the importance of each parameter for tightening process quality, mainly because of the large number of combinations and configurations that exist.The present work aims at evaluating the effects and the interactions between different parameters that have to be taken in consideration in future torquing strategy. Many experimental tests have been conducted on an Automatica test bench using a Taguchi strategy and an analysis of the first main results is now presented, highlighting the complexity of the phenomena studied.All these points will help us to better understand tightening, so as to improve performance during installation, maintenance and repair.
APA, Harvard, Vancouver, ISO, and other styles
10

Peppel, Claudia. "Enduring Rain." In Cultural Inquiry, 277–87. Berlin: ICI Berlin Press, 2020. http://dx.doi.org/10.37050/ci-17_13.

Full text
Abstract:
Over the six months in which Vajiko Chachkhiani’s Living Dog Among Dead Lions was exhibited at the Georgian Pavilion at the 57th Venice Biennale in 2017, heavy rain was pouring inside the installation. This artificially generated process provokes thoughts on the nature of the here and now as well as of the afterlife and of the future appearance of the hut’s water-sensitive insides. Eventually, the spaces and furniture exposed to rain and water stagnation will begin to rot and disintegrate, and mould and moss might grow over them. Its viewers feel caught between what they see and what they hope to see; between their perceptions and expectations, in an exceptional time zone where ‘natural’ weathering is being performed as a subject of meditative observation.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Installation process"

1

"Smart Manufacturing Concept in Shipbuilding Process with Related Optimization Issues and Strategies." In Proceeding of Marine Safety and Maritime Installation. Clausius Scientific Press, 2018. http://dx.doi.org/10.23977/msmi.2018.82621.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"A Study of Decision Making Process for the Most Efficient Steaming Speed of Ship." In Proceeding of Marine Safety and Maritime Installation. Clausius Scientific Press, 2018. http://dx.doi.org/10.23977/msmi.2018.82618.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mayfield, David, Edgar M. Rodriguez, Erik Nordenstam, and Jerry Buster. "Whipstock Casing Installation Advances Well Construction Process." In IADC/SPE Drilling Conference. Society of Petroleum Engineers, 2002. http://dx.doi.org/10.2118/74563-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nogueira, E. F., A. T. Borges, C. J. M. Junior, and R. D. Machado. "Torpedo Base - A New Conductor Installation Process." In Offshore Technology Conference. Offshore Technology Conference, 2005. http://dx.doi.org/10.4043/17197-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Prudij, A. V., P. V. Solomykin, I. A. Bondarenko, and A. O. Prohorov. "Concept of digital process twin, trenchless installation communications." In Scientific trends: Questions of exact and technical sciences. ЦНК МОАН, 2020. http://dx.doi.org/10.18411/sciencepublic-12-06-2020-05.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hatas, Veysel, Sevil Sen, and John A. Clark. "Efficient Evolutionary Fuzzing for Android Application Installation Process." In 2019 IEEE 19th International Conference on Software Quality, Reliability and Security (QRS). IEEE, 2019. http://dx.doi.org/10.1109/qrs.2019.00021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Glatzmaier, Greg C., and Koenraad F. Beckers. "Hydrogen mitigation process installation at Nevada Solar One." In SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0031968.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"The Selection of Ship Type to Use Dual Fuelled or Gas Fuelled using Analytical Hierarchy Process: A Case Study of Indonesia Government." In Proceeding of Marine Safety and Maritime Installation. Clausius Scientific Press, 2018. http://dx.doi.org/10.23977/msmi.2018.82607.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Shaohua, Deyong Che, Weihong Zhang, Jiewen Deng, Hu Wang, and Qingzhe Zhang. "Visual Dynamic Simulation on Installation Process of Power Plant." In 2010 Asia-Pacific Power and Energy Engineering Conference. IEEE, 2010. http://dx.doi.org/10.1109/appeec.2010.5448595.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thakur, Barun Kumar, Prosun Bhattacharya, and Md Jakariya. "SEDIMENT COLOUR BASED TUBEWELL INSTALLATION PROCESS IN BIHAR, INDIA." In GSA Annual Meeting in Phoenix, Arizona, USA - 2019. Geological Society of America, 2019. http://dx.doi.org/10.1130/abs/2019am-335557.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Installation process"

1

Lee, Michael H. Entity Resolution Workflow Installation Process and User Guide. Fort Belvoir, VA: Defense Technical Information Center, July 2013. http://dx.doi.org/10.21236/ada586761.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kristi M Christensen. Installation and Testing of a Jorin Visual Process Analyzer. Office of Scientific and Technical Information (OSTI), September 2010. http://dx.doi.org/10.2172/1004258.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Johnston, Derek. Installation and Implementation of an In-Process Coordinate Measuring Machine (CMM). Office of Scientific and Technical Information (OSTI), June 2008. http://dx.doi.org/10.2172/952956.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Quintana, Sarah V. Development of an Improved Process for Installation Projects of High Technology Manufacturing Equipment. Office of Scientific and Technical Information (OSTI), April 2014. http://dx.doi.org/10.2172/1130511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Burns, Dominic, and John Hopkinson. Leapfrog Technology to Standardize Equipment and System Installation, Section 9 and 10 - Review and Approval Process. Fort Belvoir, VA: Defense Technical Information Center, September 1999. http://dx.doi.org/10.21236/ada452848.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cronk, T. A., D. R. Smuin, and R. M. Schlosser. Development of remedial process options: Phase II, Feasibility study: Installation Restoration Program, Naval Air Station Fallon, Fallon, Nevada. Office of Scientific and Technical Information (OSTI), November 1991. http://dx.doi.org/10.2172/5792514.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cronk, T. A., D. R. Smuin, and R. M. Schlosser. Development of remedial process options: Phase II, Feasibility study: Installation Restoration Program, Naval Air Station Fallon, Fallon, Nevada. Office of Scientific and Technical Information (OSTI), November 1991. http://dx.doi.org/10.2172/10120118.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nazarenko, Ivan, and Oleksandr Diachenko. Experimental research of the working process of the vibration installation for compaction of concrete mixes with variable mode of oscilla-tions. Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini, April 2019. http://dx.doi.org/10.31493/gbdmm1892.0301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rusk, Todd, Ryan Siegel, Linda Larsen, Tim Lindsey, and Brian Deal. Technical and Financial Feasibility Study for Installation of Solar Panels at IDOT-owned Facilities. Illinois Center for Transportation, August 2021. http://dx.doi.org/10.36501/0197-9191/21-024.

Full text
Abstract:
The Smart Energy Design Assistance Center assessed the administrative, technical, and economic aspects of feasibility related to the procurement and installation of photovoltaic solar systems on IDOT-owned buildings and lands. To address administrative feasibility, we explored three main ways in which IDOT could procure solar projects: power purchase agreement (PPA), direct purchase, and land lease development. Of the three methods, PPA and direct purchase are most applicable for IDOT. While solar development is not free of obstacles for IDOT, it is administratively feasible, and regulatory hurdles can be adequately met given suitable planning and implementation. To evaluate IDOT assets for solar feasibility, more than 1,000 IDOT sites were screened and narrowed using spatial analytic tools. A stakeholder feedback process was used to select five case study sites that allowed for a range of solar development types, from large utility-scale projects to small rooftop systems. To evaluate financial feasibility, discussions with developers and datapoints from the literature were used to create financial models. A large solar project request by IDOT can be expected to generate considerable attention from developers and potentially attractive PPA pricing that would generate immediate cash flow savings for IDOT. Procurement partnerships with other state agencies will create opportunities for even larger projects with better pricing. However, in the near term, it may be difficult for IDOT to identify small rooftop or other small on-site solar projects that are financially feasible. This project identified two especially promising solar sites so that IDOT can evaluate other solar site development opportunities in the future. This project also developed a web-based decision-support tool so IDOT can identify potential sites and develop preliminary indications of feasibility. We recommend that IDOT begin the process of developing at least one of their large sites to support solar electric power generation.
APA, Harvard, Vancouver, ISO, and other styles
10

Dessouky, M. I., R. E. DeVor, and S. S. Kapoor. Statistical Process Control for Evaluating Contract Service at Army Installations. Fort Belvoir, VA: Defense Technical Information Center, September 1990. http://dx.doi.org/10.21236/ada228405.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Installation process' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography