Relevant bibliographies by topics / Insulation characteristic

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Insulation characteristic'

Author: Grafiati
Published: 5 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Insulation characteristic.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Insulation characteristic"

1

Wang, Zhi Hui, Lin Gou, and Xin Ming Wang. "Partial Discharge Characteristics of GIS." Applied Mechanics and Materials 513-517 (February 2014): 3532–35. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.3532.

Full text
Abstract:
Gas insulated switchgears (GIS) occupy an important position in the power system. Insulating spacers surface discharge is an important factor to the safe operation of GIS. The authors set up different insulation defect models in insulator surface and use the UV camera to observe the surface discharge phenomena, we have obtained the following conclusions: (1) the photon numbers increase with increasing length of the models, however, there are many repetitive experiments show that it has saturation characteristic ;(2) When the same kind of simulation insulation fault in different position, the i
APA, Harvard, Vancouver, ISO, and other styles
2

Xia, Rong. "Characteristic Analysis and Measurement of Dielectric Loss in Non-Linear Insulating Materials." Advanced Materials Research 986-987 (July 2014): 1471–76. http://dx.doi.org/10.4028/www.scientific.net/amr.986-987.1471.

Full text
Abstract:
Non-linear insulating material is widely used in the insulations of XLPE cable terminations and stator windings insulation of electric machines, and has obvious capability to improve the distribution of electric field. Actually, the dielectric loss factor of non-linear insulating materials is not equal to the tanδ describing linear insulating materials, and depends on applied voltage and their structures. This paper firstly discusses the difference between ac loss characteristic of non-linear dielectrics and linear dielectrics and presents a kind model of non-linear composite material. Based o
APA, Harvard, Vancouver, ISO, and other styles
3

Yamamoto, Osamu. "EXPERIENCES IN NUMERICAL ANALYSES OF SURFACE CHARGE ON INSULATORS EXPOSED TO HIGH VOLTAGE IN VACUUM." ASEAN Engineering Journal 5, no. 1 (2015): 9–21. http://dx.doi.org/10.11113/aej.v5.15452.

Full text
Abstract:
This paper deals with the electrical insulation of a gap bridged by a solid dielectric between a pair of electrodes in a vacuum, where the dielectric is a model of an insulating spacer holding electrodes in various vacuum devices. Such gap configuration is typical as a model for studying physical mechanisms of an electrical breakdown or a flashover in a vacuum, in which the insulation ability is considerably lower than a gap without any insulating spacers. Many researchers have long investigated the mechanisms of flashover, and it is believed that the charging of the insulator surface is the p
APA, Harvard, Vancouver, ISO, and other styles
4

Kersh, Volodimir, Andriy Kolesnikov, Mikola Hlitsov, and Sergіi Gedulyan. "Thermal and Acoustic Insulating Gypsum Composite Material with Improved Water Resistance." Tehnički glasnik 14, no. 2 (2020): 89–93. http://dx.doi.org/10.31803/tg-20181024091245.

Full text
Abstract:
The article discusses methods for obtaining building heat and sound insulating composite material based on gypsum with high resistance to water. An additional characteristic is considered - the water resistance index, in which the role of material strength in the wet state is enhanced. The proposed characteristic is used to optimize the heat and sound insulating composition based on gypsum. The material contains matrix gypsum-cement-ash binder and a mixture of aggregates. The result of the planned experiment shows that the water resistance index more adequately reflects the strength of the com
APA, Harvard, Vancouver, ISO, and other styles
5

Nugroho, Setyo Adi, and Setyo Aji Priambodo. "Breakdown Voltage Characteristic Of Mineral Oil In Power Transformer 16 Mva Updl Semarang." Techno (Jurnal Fakultas Teknik, Universitas Muhammadiyah Purwokerto) 21, no. 2 (2020): 119. http://dx.doi.org/10.30595/techno.v21i2.7957.

Full text
Abstract:
The transformer is one of the most important equipment in the electric power system, which is to distribute power from power plants to the load centers by step-up or step down the voltage. Transformer is expect to have a high level of reliability. One of the causes of damage to the power transformer is its insulation system. Mineral oil is an insulator that is widely used in power transformers. One of the important parameters in oil type insulation is the breakdown voltage value, the greater breakdown voltage value, as better the insulation quality. In this research, a breakdown voltage test i
APA, Harvard, Vancouver, ISO, and other styles
6

Leonov, A. P., and A. Supueva. "PROVIDING A MINIMUM DEFECTIVENESS OF INTER-TURN INSULATION AT THE MANUFACTURING STAGE AND DURING THE EXPLOITATION." Resource-Efficient Technologies, no. 1 (October 12, 2022): 1–9. http://dx.doi.org/10.18799/24056529/2022/1/320.

Full text
Abstract:
The reliability of a low-voltage asynchronous electric motor is primarily determined by the reliability of the stator winding insulation. Common reasons for the failure of the insulation system are the unsatisfactory quality of the enameled wires and electrical insulating materials used for imperfection and violation of the technological process of winding and insulating work, and the discrepancy between operating modes. In the vast majority of cases, failures occur due to damage to the inter-turn insulation as the weakest element. This causes the need to study the insulation system resistance
APA, Harvard, Vancouver, ISO, and other styles
7

І.N. Babiy, L.V. Kucherenko, Yu.S Sokolan, А.S. Zalogina, and Sławomir Rabczak. "COMPARATIVE CHARACTERISTICS OF MODERN THERMAL INSULATION TECHNOLOGIES OF BUILDINGS." Journal of Civil Engineering, Environment and Architecture 38, no. 68 (2021): 17–25. http://dx.doi.org/10.7862/rb.2021.2a.

Full text
Abstract:
Thermal insulation materials and technologies for thermal insulation of houses were investigated. The widespread use of such materials is due to the saving of fuel and energy resources, in particular, during the operation of buildings and structures. The subject of the analyzed stage of the research is the use of modern thermal insulation materials in construction, comparative characteristics of materials and processes associated with thermal insulation technologies.
 A list in the form of a table of the most used on the Ukrainian thermal insulation materials with comparative characterist
APA, Harvard, Vancouver, ISO, and other styles
8

Zaripov, D. K., R. A. Nasibullin, D. F. Zakirov, and A. V. Zakharov. "Study of operation of a polymer insulator under uniform and non-uniform contamination." Power engineering: research, equipment, technology 25, no. 5 (2024): 20–29. http://dx.doi.org/10.30724/1998-9903-2023-25-5-20-29.

Full text
Abstract:
RELEVANCE. Suspended insulators, the technical condition of which largely determines the reliability of power supply to consumers of different categories, are one of the most damaged elements of overhead power transmission lines [1-2]. This is primarily due to the fact that during their operation, insulators are exposed to various climatic conditions that have a direct impact on their insulating properties. Moreover, precipitation, such as rain, fog or dew, has the greatest impact precisely in combination with various solid, liquid and gaseous particles deposited on the insulator surface from
APA, Harvard, Vancouver, ISO, and other styles
9

Zhao, Hai Qian, and Zhong Hua Wang. "Study on Novel Thermal Insulation Structure of Thermal Recovery Boiler." Advanced Materials Research 512-515 (May 2012): 1311–14. http://dx.doi.org/10.4028/www.scientific.net/amr.512-515.1311.

Full text
Abstract:
Based on the existing problem of thermal insulation structure of thermal recovery boiler , a novel thermal insulation structure of thermal recovery boiler is designed. The novel thermal insulation structure was used on a boiler in field test, and its thermal insulation characteristics were tested. According to the test data, thermal conductivities of the novel and the conventional thermal insulation structure were calculated. Contrast analyses indicated that thermal insulation characteristic of the novel thermal insulation structure for thermal recovery boiler was better than that of the conve
APA, Harvard, Vancouver, ISO, and other styles
10

Gao, Wei, and Zhong Tang. "Characteristic Analysis of the Insulation State of Single-Core XLPE Cables." Advanced Materials Research 805-806 (September 2013): 902–5. http://dx.doi.org/10.4028/www.scientific.net/amr.805-806.902.

Full text
Abstract:
This paper investigates the state of insulation characteristic of single-core underground cable. The distributed model of single-core cable was built, which involved the insulation resistance and the leakage current. Based on the distributed model, sheath voltage and ground current on metallic sheath was examined under several kinds of insulation ageing such as various degree of insulation ageing occur in the main insulation, or in the sheath insulation, or partial insulation ageing. The results show that the voltage and current on metallic sheath indicate the degree and position of the ageing
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Insulation characteristic"

1

Aouachria, Zéroual. "L'Eolienne Savonius : comportements mécanique et aérodynamique." Aix-Marseille 1, 1987. http://www.theses.fr/1987AIX11062.

Full text
Abstract:
Methode experimentale de mesure des pressions parietales d'un rotor, a axe vertical, de type savonius en rotation. Les resultats obtenus ont ete utilises dans un modele de calcul afin de determiner les parametres mecaniques c::(m)et c::(p) de la machine. Determination des coefficients de trainee et de portance ainsi que du comportement vibratoire du rotor sous l'effet des forces aerodynamiques. Correlation du champ des pressions d'aube avec le systeme des emissions tourbillonnaires engendrees par l'eolienne en rotation. Etude de dispositifs de suspension de type "pilotis" destines a isoler, en
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Hui. "Aging characteristics of solid polymeric materials used for electrical insulation." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0018/MQ52685.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kouadria, Djilali. "The ageing and breakdown characteristics of electrical machine insulation materials." Thesis, University of Brighton, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hayakawa, N., S. Ueyama, H. Kojima, F. Endo, T. Masuda, and M. Hirose. "Electrical Insulation Characteristics of HTS Cables Under Quench-Induced Thermal Stress Condition." IEEE, 2007. http://hdl.handle.net/2237/9462.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhou, JianBin. "Electrical Characteristics of Aged Composite Insulators." Thesis, Queensland University of Technology, 2003. https://eprints.qut.edu.au/16086/1/JianBin_Zhou_Thesis.pdf.

Full text
Abstract:
Composite insulators are widely being used in power industry to alternate traditional porcelain-based insulators for their advantages, including better pollution performance, low maintenance cost, light weight, compact line design. However, due to the short application history and experience, the degradation of composite insulators in natural environment is a big concern for the power utilities. The knowledge on the degradation of composite insulators is being studied world wide. The methods to assess the working conditions of composite insulators are being studied and created. In Queensland
APA, Harvard, Vancouver, ISO, and other styles
6

Zhou, JianBin. "Electrical Characteristics of Aged Composite Insulators." Queensland University of Technology, 2003. http://eprints.qut.edu.au/16086/.

Full text
Abstract:
Composite insulators are widely being used in power industry to alternate traditional porcelain-based insulators for their advantages, including better pollution performance, low maintenance cost, light weight, compact line design. However, due to the short application history and experience, the degradation of composite insulators in natural environment is a big concern for the power utilities. The knowledge on the degradation of composite insulators is being studied world wide. The methods to assess the working conditions of composite insulators are being studied and created. In Queensla
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Mengguang. "The electrical breakdown characteristics of oil/paper insulation under fast front impulse voltages." Thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/30108.

Full text
Abstract:
Gas Insulated Substation (GIS) and Gas Insulated Transmission Line (GITL) have found broad application in power system over the last twenty years. Disconnect switch operations in this equipment causes transient voltages with rise times as fast as 5 to 20 nanoseconds and magnitudes as high as 2.5 pu. There is very little information on the effect of these transients on oil/paper insulated equipment connected to the GIS and GITL. There have been reports of transformer and bushing failures which may have been caused by these transients. In the investigation reported in this thesis, the electrica
APA, Harvard, Vancouver, ISO, and other styles
8

Dinse, Brian P. "Silicon-on-insulator MOSFETS : material, process and device characteristics /." Online version of thesis, 1994. http://hdl.handle.net/1850/12193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mansour, D. A., T. Okusu, K. Nishizawa, et al. "Comparison of Partial Discharge Characteristics for Different Defect Types in SF6 Gas Insulation System." IEEE, 2008. http://hdl.handle.net/2237/12057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Norton, Andrew Jonathan. "The life cycle assessment and moisture sorption characteristics of natural fibre thermal insulation materials." Thesis, Bangor University, 2008. https://research.bangor.ac.uk/portal/en/theses/the-life-cycle-assessment-and-moisture-sorption-characteristics-of-natural-fibre-thermal-insulation-materials(c43f38ae-3eb2-4d1d-8d64-be790ed3f71b).html.

Full text
Abstract:
A comparative Life Cycle Assessment (LCA) was performed on two natural fibre thermal insulation products made from hemp and sheep wool and a benchmark mineral wool product. The assessment revealed both advantages and some disadvantages with the natural fibre materials. A major finding was the particularly low or absent impact in terms of global warming potential shown by the natural fibre materials. This was caused by the renewable carbon sequestered in the material withdrawing carbon dioxide from the atmosphere. With regard to the end of the product life, the study showed that only a proporti
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Insulation characteristic"

1

Ignatova, Ol'ga, and Vladimir Zavadskiy. Technology of insulation and wall materials and products. INFRA-M Academic Publishing LLC., 2025. https://doi.org/10.12737/2141115.

Full text
Abstract:
The textbook provides an analysis and characteristics of various thermal, waterproofing and wall materials, an assessment of their suitability for use in construction. Classifications by structure, purpose, basic construction and operational properties, and areas of application are given. The basic schemes of manufacturing thermal insulation materials based on mineral and organic raw materials, as well as the basic principles of creating bitumen and polymer waterproofing materials are presented. Modern technologies for the production of wall products from cellular concretes, lightweight concre
APA, Harvard, Vancouver, ISO, and other styles
2

Consumer Energy Council of America. Research Foundation. and Oak Ridge National Laboratory, eds. Characteristics, practices and productivity: A data based analysis of the Consumer Energy Council of America's survey of energy services companies. CECA/RF, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Test Methods to Evaluate Thermal Properties and Performance of Insulative Coatings. AMPP, 2023. https://doi.org/10.5006/nace_tm21431-2023.

Full text
Abstract:
Scope The purpose of this standard test method is to specify test methods and test conditions used to evaluate thermal properties, insulation values, and performance, before and after thermal aging, for insulative coatings. This test method is intended for use by facility owners, engineers, health and safety specialists, coatings manufacturers, and other interested parties. Rationale Numerous test methods have been used to characterize the performance of insulative coatings in the past. Some of these test methods are from test methods used for traditional bulk insulation products and from othe
APA, Harvard, Vancouver, ISO, and other styles
4

Kouadria, Djilali. The ageing and breakdown characteristics of electrical machine insulation materials. 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

NCCER. ES19105 Characteristics of Pipe Insulation Level 1 Trainee Guide in Spanish. Pearson Education, Limited, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gao, Lan. Characteristics of Streamer Discharges in Air and Along Insulating Surfaces. Uppsala Universitet, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Howard C. Characteristics of semi-insulating GaAs photoconductive detectors under steady state illumination. 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yang, Howard C. Characteristics of semi-insulating GaAs photoconductive detectors under steady state illumination. 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

NFPA 274, Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation: 2013 Edition. National Fire Protection Association, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

NFPA 274, Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation: 2009 Edition. National Fire Protection Association, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Insulation characteristic"

1

Zhang, Jia-Wei, Wei-Hang Deng, Chatchai Putson, Fouad Belhora, and Abdelowahed Hajjaji. "Aging Characteristic of Backsheet After Ultraviolet Radiation." In Insulation Aging Phenomenon in Green Energy Systems. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-7607-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Noji, H., T. Shibata, S. Isojima, et al. "AC Characteristic of a High-Tc Superconducting Power-Cable Conductor with Interlayer Insulation." In Advances in Superconductivity X. Springer Japan, 1998. http://dx.doi.org/10.1007/978-4-431-66879-4_302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Zejia, Luwei Du, Shihu Yu, et al. "Effect of Moisture Absorption on Dielectric Property and AC Breakdown Characteristic of Epoxy Resin Insulation." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. https://doi.org/10.1007/978-981-97-8820-0_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Im, Sang-Hyuk, Joon-Yeon Kim, Jae-Hong Koo, and Bang-Wook Lee. "DC Dielectric Characteristic Study on Epoxy and Air Insulation Materials for the Development of MVDC Switchgear." In Lecture Notes in Electrical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31680-8_132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Zhexian, Wenfu He, Sen Yang, Cheng Chang, and Min Ji. "Seismic Performance of a Precast Hollow Insulated Shear Wall." In Lecture Notes in Civil Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_39.

Full text
Abstract:
AbstractA new precast hollow insulation shear wall (PHISW) is proposed in this paper. To study the seismic behaviors of the new PHISW, two cast-in-place solid shear wall (CSW) specimens, two precast monolithic hollow insulated shear wall (PMW) specimens, and two precast hollow insulated shear wall (PSW) specimens with vertical seams were produced and subjected to low-cyclic reversed loadings. The seismic indices obtained from low-cyclic reversed tests include the failure pattern, hysteretic curves and energy dissipation. The experiment results indicate that flexural failure is the main failure
APA, Harvard, Vancouver, ISO, and other styles
6

Gao, Zhen, Weilong Peng, Haolun Che, Xiaobo Lin, Tianyu Ruan, and Jian Hao. "Thermal Aging State Evaluation Method for Submarine Cable Insulation Based on High-Voltage Frequency Domain Dielectric Characteristic Quantity." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1064-5_84.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Shi, Mingchunjian, Liming Kong, Yongzhong Chen, and Xiang Li. "Environmental Data-Driven Optimization of Building Skin Design by Coupling Genetic Algorithm and Neural Network Algorithm -Taking Shaanxi Xi’an Garment Office Building as Example." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3433-0_21.

Full text
Abstract:
Abstract It is complex to design facade skin for different building, in view of the high operational energy consumption that accompanies buildings with excessively large window-to-wall ratios. For public buildings with, the energy load cost relatively large. There are a characteristic of facade which have high wall window rate to consume a lot of energy or increase Insulation cost due to the influence of interfaces. For the treatment of shading in summer, excessive overhang of the eaves often increases the load and structural cost of the roof or increases the external sunshade structure to inc
APA, Harvard, Vancouver, ISO, and other styles
8

Ostapska, Katarzyna, Johannes Brozovsky, Domas Valiukas, and Eimantas Tinginys. "Structural Analysis of Glulam Frame of a Modular Timber–Aluminium Hybrid Façade System in Nordic Climate." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_113.

Full text
Abstract:
AbstractThis article presents the results of mechanical testing and structural analysis of the glulam frame supporting novel external façade envelope elements made of aluminium, glass, and insulation. The glulam frame forms the basic structural support for the new modular hybrid façade system, an industrial product designed by STATICUS company with an aim at reducing environmental impact. The ultimate and serviceability limit states are considered to assess the durability of the design in terms of possible deformations affecting air and moisture tightness as well as the level of stresses leadi
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Jiahe, Man Ding, Weifeng He, and Zhenfei Chen. "The Space Charge Characteristic of Cross-Linking Polyethylene Insulation of High Voltage DC Cables on Different Voltage Levels Under Temperature Gradient." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0451-8_138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Şahin, Hatice Gizem, Hatice Elif Beytekin, and Ali Mardani. "Effect of Recycled Aggregate Utilization on Strength Properties of Lightweight Concrete Facade Having a Self-Cleaning Characteristic." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_23.

Full text
Abstract:
AbstractUtilization of lightweight concrete results in a reduction in the weight of the structure, leading to lower destructive effects of seismic forces on the building. Additionally, in today’s conditions where more efficient energy use is desired, there is an increasing interest in the use of lightweight concrete facade panels due to their superior performance in terms of heat insulation. It is known that pollutants such as COx and NOx adhere to facades over time, causing pollution and visual deterioration. It was reported that materials with photocatalytic properties are used in concrete e
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Insulation characteristic"

1

Fadzilah, Fatimah Nurul, Avrin Nur Widiastuti, Noor Akhmad Setiawan, Naufal Hilmi Fauzan, Naufal Hilmi Fauzan, and Mochammad Wahyudi. "Characteristic Analysis of Partial Discharge Parameters in Air Insulation Using High Frequency Current Transformer." In 2024 16th International Conference on Information Technology and Electrical Engineering (ICITEE). IEEE, 2024. https://doi.org/10.1109/icitee62483.2024.10808443.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zheng, Linzi, Xinyi Yan, Zhili Li, Xinyu Xu, Lingyu Zhu, and Shengchang Ji. "Multi-Frequency Impedance Characteristic of Long-Time Operating DC-Link Capacitor in HVDC System." In 2024 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2024. https://doi.org/10.1109/ceidp61745.2024.10907352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kubarev, A. Y., A. E. Usachev, and D. D. Akhmerov. "Apparent Charge as a Characteristic of Technical Condition Electrical Insulation of High-Voltage Electrical Equipment." In 2025 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM). IEEE, 2025. https://doi.org/10.1109/icieam65163.2025.11028206.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Liang, Yi Zhao, Song Cheng, Wei Sun, Bing Wei, and Jingyuan Chi. "The Investigation on Potential Characteristic Markers for Assessing the Aging State of Paper Insulation of Transformers." In 2025 IEEE International Conference on Electronics, Energy Systems and Power Engineering (EESPE). IEEE, 2025. https://doi.org/10.1109/eespe63401.2025.10987038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhao, Xiaoling, Dongxian Tan, Su Zhao, Dengmin Xiao, Yizhou Wu, and Ruishuang Zhong. "Characteristic Analysis of AC Nozzle Arcs in CO2." In 2018 IEEE Electrical Insulation Conference (EIC). IEEE, 2018. http://dx.doi.org/10.1109/eic.2018.8481086.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wan, Qingzhu, Xuejun Jin, and Xingfu Yuan. "Cable insulation defect diagnosis based on harmonic characteristic label." In 2022 IEEE 5th International Electrical and Energy Conference (CIEEC). IEEE, 2022. http://dx.doi.org/10.1109/cieec54735.2022.9846302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jose, J. Arul, and T. Sree Renga Raja. "Enriched insulation characteristic of Kapok nano-fluid using nanomaterial." In 3RD PROCESS SYSTEMS ENGINEERING & SAFETY (PROSES) SYMPOSIUM 2023. AIP Publishing, 2025. https://doi.org/10.1063/5.0268028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Dan-Dan, Zheng Han, Shuang-suo Yang, Jie Guo, Yue Zhou, and Ling-Hui Yang. "Influence of external factors on characteristic parameters of metal oxide arrester." In 2017 IEEE Electrical Insulation Conference (EIC). IEEE, 2017. http://dx.doi.org/10.1109/eic.2017.8004639.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhong, Jianying, Xiongxiong Fu, Aijun Yang, et al. "Insulation performance and liquefaction characteristic of C5F10O/CO2 gas mixture." In 2017 4th International Conference on Electric Power Equipment - Switching Technology (ICEPE-ST). IEEE, 2017. http://dx.doi.org/10.1109/icepe-st.2017.8188851.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gang, Wu, Bi Ke, Feng Qiaolian, et al. "Research of vacuum thermal insulation characteristic for conduction cooling SMES." In 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet). IEEE, 2011. http://dx.doi.org/10.1109/cecnet.2011.5769177.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Insulation characteristic"

1

Meißner, Frank, Heike Sonntag, and Anita Morandell-Meißner. Water uptake measurement for thermal renovations – comparison between non-destructive method, the Karsten tube, and automatic laboratory measurements. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541652209.

Full text
Abstract:
The energy-efficient renovation of existing buildings requires precise knowledge of the wall structure. When using interior insulation systems, the driving rain resistance of the façade is also decisive for the function of the entire wall structure. When using interior insulation on exposed brick facades, the verification can often only be done with the help of a hygrothermal simulation. In practice, a non-destructive method, the Karsten tube or various modifications, is used to assess this essential characteristic value quickly. However, the measured values obtained from this method do not ag
APA, Harvard, Vancouver, ISO, and other styles
2

Todd, R. J., D. J. Pate, and K. M. Welch. Modeling of RHIC insulating vacuum for system pumpdown characteristics. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/6342670.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Todd, R. J., D. J. Pate, and K. M. Welch. Modeling of RHIC insulating vacuum for system pumpdown characteristics. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10173165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Natesan, K., and D. L. Rink. Physical and mechanical characteristics and chemical compatibility of aluminum nitride insulator coatings for fusion reactor applications. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/230196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Veloso, Rita Carvalho, Catarina Dias, Andrea Resende Souza, Joana Maia, Nuno M. M. Ramos, and João Ventura. Improving the optical properties of finishing coatings for façade systems. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541592743.

Full text
Abstract:
The need to improve energy efficiency of the building stock has led to a continuous increase in the implementation of exterior thermal insulation systems, such as ETICS. Progressively, these systems are being applied with darker colours, increasing the concern for hygrothermal behaviour and durability. Despite the significant developed studies, very few reports regarding their optical properties are available. The optical and catalytic capacity turns nanomaterials into excellent candidates for use in finishing coatings with high solar reflectance with dark colours without affecting the aesthet
APA, Harvard, Vancouver, ISO, and other styles
6

Fuchs, Marcel, Jerry Hatfield, Amos Hadas, and Rami Keren. Reducing Evaporation from Cultivated Soils by Mulching with Crop Residues and Stabilized Soil Aggregates. United States Department of Agriculture, 1993. http://dx.doi.org/10.32747/1993.7568086.bard.

Full text
Abstract:
Field and laboratory studies of insulating properties of mulches show that the changes they produce on the heat balance and the evaporation depend not only on the intrinsic characteristics of the material but also on the structure of air flow in boundary layer. Field measurements of the radiation balance of corn residue showed a decrease of reflectivity from 0.2 to 0.17 from fall to spring. The aerodynamic properties of the atmospheric surface layer were turbulent, with typical roughness length of 12 to 24 mm. Evaporation from corn residue covered soils in climate chambers simulating the diurn
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Insulation characteristic' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography