To see the other types of publications on this topic, follow the link: Intercrystalline corrosion.

Journal articles on the topic 'Intercrystalline corrosion'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Intercrystalline corrosion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

FARKHSHATOV, M. N. "DECREASE IN CORROSION RESISTANCE OF MACHINE PARTS AND EQUIPMENT IN THE AGRICULTURAL PROCESSING INDUSTRIES." Tekhnicheskiy servis mashin 62, no. 3 (2024): 53–57. http://dx.doi.org/10.22314/2618-8287-2024-62-3-53-57.

Full text
Abstract:
The fast-wearing parts of machinery and equipment of the processing branch of the agro-industrial complex are made of corrosion-resistant steels of various classes. There are many ways to restore them, but the most optimal way is electrocontact welding of corrosion-resistant steels of the appropriate class. This method has a number of advantages over other recovery methods, however, the effect of electrocontact welding of the tape on the corrosion resistance of the coating has not been practically studied. (Research purpose) The research purpose is theoretically substantiating the possible rea
APA, Harvard, Vancouver, ISO, and other styles
2

Królikowski, Andrzej. "Corrosion Behaviour of Amorphous and Nanocrystalline Alloys." Solid State Phenomena 227 (January 2015): 11–14. http://dx.doi.org/10.4028/www.scientific.net/ssp.227.11.

Full text
Abstract:
Structural and chemical attributes of amorphous and nanocrystalline metals, which affect their corrosion behaviour are outlined. Effects of the fraction of intercrystalline regions, diffusivity, chemical homogeneity / heterogeneity and local ordering are indicated. These features can lead to higher or lower corrosion resistance as compared to coarse-grained counterparts, depending on the nature of tested metal and corrosive environment. Contributions of these factors are represented by two examples of passive behavior of nanocrystalline metals and amorphous Ni-P alloys.
APA, Harvard, Vancouver, ISO, and other styles
3

Chuvil’deev, Vladimir, Aleksey Nokhrin, Constantin Likhnitskii та ін. "Corrosion Resistance of the Welded Joints from the Ultrafine-Grained Near-α Titanium Alloys Ti-5Al-2V Obtained by Spark Plasma Sintering". Metals 13, № 4 (2023): 766. http://dx.doi.org/10.3390/met13040766.

Full text
Abstract:
A solid-phase diffusion welding of coarse-grained and ultrafine-grained (UFG) specimens of titanium near-α alloy Ti-5Al-2V used in nuclear power engineering was made by Spark Plasma Sintering. The failure of the welded specimens in the conditions of hot salt corrosion and electrochemical corrosion was shown to have a preferentially intercrystalline character. In the case of the presence of macrodefects, crevice corrosion of the welded joints was observed. The resistance of the alloys against the intercrystalline corrosion was found to be determined by the concentration of vanadium at the titan
APA, Harvard, Vancouver, ISO, and other styles
4

Baumgartner, M., and H. Kaesche. "Intercrystalline Corrosion and Stress Corrosion Cracking of AlZnMg Alloys." CORROSION 44, no. 4 (1988): 231–39. http://dx.doi.org/10.5006/1.3583931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mao, Ling Bo, Ren Yuan Zhang, and Feng Li. "Corroded Behavior of 310S Stainless Steel in Molten Al-Si Eutectic Alloy." Advanced Materials Research 311-313 (August 2011): 957–61. http://dx.doi.org/10.4028/www.scientific.net/amr.311-313.957.

Full text
Abstract:
Corroded behavior of 310S stainless steel by molten Al-Si eutectic alloy in high temperature thermal cycles of 495~620°C was investigated. SEM/EDX, XRD and metallographic technique were used for observing and analyzing the morphology, composition and internal microstructure of the corrosion specimens. Results showed: on the surface of 310S stainless steel, after corroded through 300 melting-solidification thermal cycles, a corrosion layer of about 3μm thick, composed mainly of Fe2Al5 phase and FeAl3 phase was formed. Besides, upon observation of internal microstructure of 310S stainless steel
APA, Harvard, Vancouver, ISO, and other styles
6

Kuzyukov, A. N. "Types of intercrystalline corrosion fracture of metals." Materials Science 29, no. 6 (1994): 612–15. http://dx.doi.org/10.1007/bf00561637.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kuznetsov, Maxim, Evgenii Zernin, Sergey P. Zhuravkov, and Nikolay Yavorovsky. "Influence of Nanopowders on Corrosion Resistance of Welded Joints." Advanced Materials Research 1040 (September 2014): 241–44. http://dx.doi.org/10.4028/www.scientific.net/amr.1040.241.

Full text
Abstract:
The paper presents experimental results on influence of tungsten, molybdenum nanopowders and aluminum oxyhydroxide phase introduced into the molten pool on the corrosion resistance of welded joints. It was shown that the nature of nanopowders significantly impacts intercrystalline corrosion of the welding joint.
APA, Harvard, Vancouver, ISO, and other styles
8

Panfilov, Peter, and Alexander Yermakov. "Brittle Intercrystalline Fracture in Iridium." Platinum Metals Review 45, no. 4 (2001): 176–78. http://dx.doi.org/10.1595/003214001x454176178.

Full text
Abstract:
Refractory iridium has a unique position among metals due to its resistance to corrosion and its inclination to brittle fracture, the latter only occurring under tension. Since 1960 iridium has been the subject of much research, but this has not lead to an understanding of its inclination to brittle fracture under load, although the problem of working iridium has been successfully solved. Grain boundary brittleness during mechanical treatment is the main problem with iridium, and is a continuing and important topic for academic discussion about iridium. Discussion of this problem, begun forty
APA, Harvard, Vancouver, ISO, and other styles
9

Chumalo, G. V., R. K. Melekhov, P. N. Fedyakin, and M. V. Koval'. "Corrosion cracking and intercrystalline corrosion of chrome-manganese-nickel austenitic steels." Soviet Materials Science 25, no. 6 (1990): 607–9. http://dx.doi.org/10.1007/bf00727088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hudecová, S., M. Uhríčik, P. Palček, M. Mikolajčík, V. Chvalníková, and M. Slezák. "The influence of structure, sensitization and corrosion on the fatigue properties of austenitic steel." Journal of Physics: Conference Series 2712, no. 1 (2024): 012008. http://dx.doi.org/10.1088/1742-6596/2712/1/012008.

Full text
Abstract:
Abstract The article will be focused on examining and comparing the influence of structure, sensitization and corrosion on the fatigue properties of austenitic stainless steel. The methodology of the experiment includes fatigue tests of samples attacked by intercrystalline corrosion. Therefore, the test samples were subjected to heat treatment for sensitization. Then these samples were subjected to long-term exposure in an aggressive corrosion solution. Experiments deal with microstructural material analysis, fractographic analysis, mechanical and fatigue tests.
APA, Harvard, Vancouver, ISO, and other styles
11

Enescu, Maria Cristiana, Elena Valentina Stoian, Carmen Ivona Petre, and Carmen Otilia Rusanescu. "The Influence of Heat Treatments in Corrosion Resistance of Austenitic Steels." Scientific Bulletin of Valahia University - Materials and Mechanics 19, no. 20 (2023): 7–12. http://dx.doi.org/10.2478/bsmm-2023-0001.

Full text
Abstract:
Abstract This paper presents the results of laboratory research on the influence of heat treatment on the corrosion resistance of austenitic steels (Cr-Ni, Cr, Mn, Cr-Mn-Ni), research that may extend under certain conditions and ferrites steels and semi-ferrites chrome steels.This type of intercrystalline corrosion was observed in other alloy systems due to media containing chloride ions.The experimental results consist in comparing structural changes and corrosion rate for different types of austenitic steels that were made experimental research.
APA, Harvard, Vancouver, ISO, and other styles
12

EROFEEV, M. N., A. I. CHMYKHALO, V. V. SPIRYAGIN, I. N. KRAVCHENKO, A. L. GALINOVSKY, and S. A. VELICHKO. "Improvement of methods for monitoring and diagnostics of properties of metal structures under corrosion." Technology of metals, no. 7 (2022): 40–53. http://dx.doi.org/10.31044/1684-2499-2022-0-7-40-53.

Full text
Abstract:
The analysis results of known methods for assessment of the resistance of steels and alloys to intercrystalline corrosion cracking are given. Based on the identified shortcomings, a new method of monitoring and diagnostics is proposed, which allows one to carry out an express-assessment of the tendency of steels and alloys to corrosion cracking (delayed destruction) under conditions of direct operation by analyzing the microhardness of their structural components.
APA, Harvard, Vancouver, ISO, and other styles
13

Kuzyukov, A. N., and V. P. Krikun. "Intercrystalline corrosion of equipment for the synthesis of carbamide." Chemical and Petroleum Engineering 33, no. 1 (1997): 88–90. http://dx.doi.org/10.1007/bf02416792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Kolobnev, N. I., L. B. Khokhlatova, S. V. Samokhvalov, et al. "Heat Treatment Effect on Properties of Al-Mg-Si-Cu 1370 Alloy." Materials Science Forum 519-521 (July 2006): 519–24. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.519.

Full text
Abstract:
The Russian 1370 Al-Mg-Si-Cu alloy (analogue of 6056) is an advanced material for the skin and stringers of fuselage. However, these alloys are susceptible to the intercrystalline corrosion depending on the heat treatment regimes. The investigations of the effect of heating temperature during the solid solution treatment (530-555)°C and quenching rate, ageing regimes and interval between the quenching and ageing on the structure and properties of 1370 alloy sheets were performed. The strengthening β (Mg2Si) -phase and Q (Al5Cu2Mg8Si6) -phase relationship dependence of the alloy properties is e
APA, Harvard, Vancouver, ISO, and other styles
15

Zheng, Shu Qi, Chang Feng Chen, and Li Qiang Chen. "Corrosion Characteristics of 2205 Duplex Stainless Steel in High Temperature and High Pressure Environment Containing H2S/CO2." Applied Mechanics and Materials 236-237 (November 2012): 95–98. http://dx.doi.org/10.4028/www.scientific.net/amm.236-237.95.

Full text
Abstract:
The corrosion characteristics of 2205 duplex stainless steel in high- temperature and high-pressure (HT and HP) environments containing H2S/CO2 are investigated in this paper. After corroded 720 hours in the condition of 3.5 MPa H2S, 3.5 MPa CO2, 205°C, 15% NaCl and a sulfide content of 3g/L, one layer of comparably thick corrosion product are formed on the surface of the specimens. The corrosion products, which are relatively porous, lose its protection to the matrix. Lots of pitting are found on the surface of the steel and intercrystalline fracture and transcrystalline fracture are generate
APA, Harvard, Vancouver, ISO, and other styles
16

Łosiewicz, Bożena, Magdalena Popczyk, Magdalena Szklarska, Agnieszka Smołka, Patrycja Osak, and A. Budniok. "Use of Scanning Vibrating Electrode Technique to Localized Corrosion Evaluation." Solid State Phenomena 228 (March 2015): 353–68. http://dx.doi.org/10.4028/www.scientific.net/ssp.228.353.

Full text
Abstract:
This work presents the basic theory and the usability of the scanning vibrating electrode technique (SVET), especially in the field of corrosion. At present, SVET is to be considered as one of the latest electrochemical testing methods. The essence of determining the current density resulting from corrosion is limited to the measurement of the potential gradient between the two points on the surface of the metal and over it, within the electric field of a local element. SVET has been used to study local, galvanic and intercrystalline corrosion. It is particularly useful in studying the corrosi
APA, Harvard, Vancouver, ISO, and other styles
17

ELSUKOV, S. K., I. V. ZORIN, E. I. STOROZHEVA, V. I. LYSAK, V. O. KHARLAMOV, and S. A. FASTOV. "FORMATION OF CORROSION-RESISTANT CLADDING LAYERS ON PETROCHEMICAL EQUIPMENT PARTS BY TWO-ELECTRODE SURFACING METHOD." Metal Technology, no. 10 (October 2024): 26–34. https://doi.org/10.31044/1684-2499-2024-0-10-26-34.

Full text
Abstract:
The study results of the elemental composition and structure of corrosion-resistant austenitic metal deposited by the one- and two-electrode method in a protective gas are discussed. Recommendations on the formation of a defect-free cladding layer by surfacing with two electrode wires are given. It is shown that comparable results in resistance to intercrystalline corrosion are achieved with a lower consumption (~by 30-35%) of the electrode metal for the formation of a cladding layer and a more technologically advanced form of rollers deposited with two wires.
APA, Harvard, Vancouver, ISO, and other styles
18

Li, B., Q. L. Pan, Z. Y. Zhang, and C. Li. "Research on intercrystalline corrosion, exfoliation corrosion, and stress corrosion cracking of Al-Zn-Mg-Sc-Zr alloy." Materials and Corrosion 64, no. 7 (2012): 592–98. http://dx.doi.org/10.1002/maco.201206727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Zhao, Yuantao, Lianbo Wang, Zhenbo Qin, et al. "The Roles of Ti Particles in Improving the Corrosion Resistance of Electrochemically Assembled Ni-Ti Composite Coatings." Corrosion 73, no. 9 (2017): 1107–18. http://dx.doi.org/10.5006/2408.

Full text
Abstract:
The influences of co-deposited Ti particles on corrosion behavior of electrodeposited Ni-Ti coatings were investigated. The co-deposited Ti particles caused the refined crystallite size and random-oriented texture of Ni-Ti coating. In 3.5 wt% sodium chloride (NaCl) solution, the buried Ti particles in Ni matrix blocked the corrosion path and rapid intercrystalline corrosion. The inert TiO2 could form on the exposed Ti particles and hinder localized corrosion. In 10 wt% sodium hydroxide (NaOH) solution, Ni matrix crystallites, refined by co-deposited Ti particles, contributed to formation of th
APA, Harvard, Vancouver, ISO, and other styles
20

Krylova, S. E., V. A. Zavyalov, and M. I. Goltapin. "Development of Technology of Robotized Laser Welding of Thin Wall Products from Heat-Resistant Alloys." Materials Science Forum 992 (May 2020): 663–69. http://dx.doi.org/10.4028/www.scientific.net/msf.992.663.

Full text
Abstract:
Results of the developed industrial technology of restoration of a surface corrosion-resistant staly are presented by method of laser building up. The comparative analysis of a microstructure of the built-up wearproof layer, an alloyage zone with material of a basis and diffusive zone at the different technological modes of building up is given. Influence of morphology of particles of additive powder on parametrical characteristics of the roller received by laser gas powder building up is investigated. The optimum modes of building up on a substrate from steel 12Cr18Ni10Ti are set. Tests for f
APA, Harvard, Vancouver, ISO, and other styles
21

Vaníčková, Jaroslava, Jiří Děd, P. Bartuška, and Pavel Lejček. "Intergranular Failure of Roman Silver Artefacts." Materials Science Forum 567-568 (December 2007): 213–16. http://dx.doi.org/10.4028/www.scientific.net/msf.567-568.213.

Full text
Abstract:
Silver objects obtained from archaeological excavations often exhibit an extended embrittlement. The causes of this embrittlement were studied on silver artefacts buried for more than one thousand years in the soil using light and electron microscopy techniques and EDX microanalysis. Our investigation revealed presence of chlorine, sulphur and oxygen along the grain boundaries suggesting that most likely, the catastrophic failure of the grave objects made of Ag–Cu alloys is caused by an intercrystalline corrosion attack. The role of possible grain boundary segregation and/or precipitation of c
APA, Harvard, Vancouver, ISO, and other styles
22

Shimov, Georgy, Andrey Serebryakov, and Aleksander Serebryakov. "Application with Simultaneous Electrocontact Heating Stretching to Reduce Residual Stresses in the Heat Exchange Tube." Advanced Materials Research 1127 (October 2015): 121–26. http://dx.doi.org/10.4028/www.scientific.net/amr.1127.121.

Full text
Abstract:
The main reason of appearance and growth of corrosion damages of the nuclear steam generator heat exchanger tubes is the process of stress-corrosion cracking of metal under the influence of residual tensile stress.The article contain the suggestion of the method that combines the operation of heat processing and straightening of pipes by stretching. The approbation of the method was carried out in the laboratory conditions. There is described the construction and working principle of a trial installation. During the experiments different parameters of electrocontact heating with stretching wer
APA, Harvard, Vancouver, ISO, and other styles
23

Huerta, D., and B. Siefert. "Intercrystalline corrosion of surface-welds of nickel alloys on carbon steel." Journal of Materials Science 40, no. 19 (2005): 5153–59. http://dx.doi.org/10.1007/s10853-005-4405-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Timofeev, B. T., V. A. Fedorova, and A. A. Buchatskii. "Intercrystalline Corrosion Cracking of Power Equipment Made of Austenitic Steels (Review)." Materials Science 40, no. 1 (2004): 48–59. http://dx.doi.org/10.1023/b:masc.0000042784.27534.4c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Kodzhaspirov, G. E., A. I. Rudskoy, and V. V. Rybin. "Effect of Thermomechanical Processing on Structure and Corrosion-Mechanical Properties of AISI 321 Steel." Advanced Materials Research 89-91 (January 2010): 769–72. http://dx.doi.org/10.4028/www.scientific.net/amr.89-91.769.

Full text
Abstract:
The effect of Thermomechanical Processing (TMP) on the fine structure (dislocation density and fragments evolution), recrystallization, carbide transformations and tendency toward intercrystalline corrosion (ICC) and corrosion-mechanical strength of AISI 321 type steels is described. It’s shown that the grain size and overall amount of carbide phase has almost no effect on ICC. With an increase in dislocation density a tendency is observed toward a reduction in corrosion rate, but increases with an increase in proportion of recrystallized material. This connection is explained by an increasing
APA, Harvard, Vancouver, ISO, and other styles
26

Tyszko, Cyprian, and Jacek Gorka. ""EFFECT OF TIG REMELTING ON PROPERTIES AND STRUCTURE OF WELDED JOINTS OF AUSTENITIC STAINLESS STEEL "." International Journal of Modern Manufacturing Technologies 14, no. 2 (2022): 309–18. http://dx.doi.org/10.54684/ijmmt.2022.14.2.309.

Full text
Abstract:
" One of the most commonly used corrosion resistant construction materials are austenitic stainless steels, mainly AISI 304. Any deviation from the welding technology in the case of this steel may result in welding defects or even loss of corrosion resistance. The purpose of this work was explored the influence of remelting using the TIG method (141) on the properties and structure of welded joints of AISI 304. The scope of this paper included making test joints of 2 mm thick sheets and then remelting them. The further part of this work consisted in carrying out: mechanical, macroscopic and mi
APA, Harvard, Vancouver, ISO, and other styles
27

Zeng, Ding, Hong Yu Lu, Bao Hong Hao, Hao Zheng Yu, and Yu Mi. "Experimental Study and Mechanism on the Corrosion of Stressed Reinforcement Bars." Key Engineering Materials 837 (April 2020): 109–15. http://dx.doi.org/10.4028/www.scientific.net/kem.837.109.

Full text
Abstract:
In order to understand the influence of the tensile stress on the corrosion of reinforcement bars in civil engineering, the reinforcement bars specimens were put into the liquid corrosion tank made of hydrochloric acid and distilled water by applying the tension stress on the reinforcing frame to carry out rapid corrosion. The corrosion of reinforcement bars under different tension stresses was tested by using electrochemical polarization method. The metallographic examination of reinforcement bars was carried out through the section of reinforcement bars. The corrosion mechanism of the stress
APA, Harvard, Vancouver, ISO, and other styles
28

Aust, Karl T., Glenn Hibbard, Gino Palumbo, and Uwe Erb. "Intercrystalline defects and some properties of electrodeposited nanocrystalline nickel and its alloys." International Journal of Materials Research 94, no. 10 (2003): 1066–72. http://dx.doi.org/10.1515/ijmr-2003-0195.

Full text
Abstract:
Abstract Experimental results are presented concerning the influence of primary intercrystalline defects, i. e., grain boundaries and triple junctions, on the properties of nanocrystalline nickel and its alloys. The properties considered are largely based on nanostructured materials relatively free of secondary defects introduced during synthesis, such as porosity, residual amorphous regions, lattice dislocations and extrinsic grain boundary dislocations. These property studies include thermal stability and grain growth, mechanical, electrical, corrosion and hydrogen transport.
APA, Harvard, Vancouver, ISO, and other styles
29

Kopylov, V. I., V. N. Chuvil'deev, A. V. Nokhrin, N. A. Kozlova, M. K. Chegurov, and N. V. Melekhin. "Issledovanie prochnosti, relaksatsionnoy i korrozionnoy stoykosti ul'tramelkozernistoy austenitnoy stali 08Kh18N10T, poluchennoy metodom RKU-pressovaniya. II. issledovanie relaksatsionnykh svoystv i stoykosti protiv mezhkristallitnoy korrozii." Микология и фитопатология, no. 5 (December 15, 2023): 44–59. http://dx.doi.org/10.31857/s0869573323050063.

Full text
Abstract:
Relaxation resistance and corrosion resistance of samples of ultrafine-grained steel 08H18N10T obtained by the method of equal-channel angular pressing at temperatures of 150 and 450 °C are investigated. For ultrafine-grained steel with high values of the limit of macroelasticity and yield strength, a decrease in the Hall—Petch coefficient due to fragmentation of δ-ferrite particles at the method of equal-channel angular pressing is shown. It is established that the samples of ultrafine-grained steel have 2-3 times higher relaxation resistance compared to coarse-grained steel. It is noted that
APA, Harvard, Vancouver, ISO, and other styles
30

Berns, Hans, Sascha Riedner, and Birger Hussong. "Influence of Molybdenum and Copper on the Corrosion Resistance of High Strength Austenitic Steels." Materials Science Forum 638-642 (January 2010): 2979–85. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.2979.

Full text
Abstract:
Joint alloying of 0.85 to 1.1 mass% C + N raises the strength and cold work hardening of steels with 18 to 19 mass% Cr and Mn each and allows to produce them at atmospheric pressure. A yield strength of 600 MPa is combined with a true fracture stress of almost 2500 MPa and ≈ 70 % elongation. However, there is a risk of carbide/nitride precipitation during quenching of thicker cross sections after solution annealing. The addition of Mo and Cu affects the corrosion resistance as well as the precipitation. Submersion test and current density/potential tests in several aqueous solutions characteri
APA, Harvard, Vancouver, ISO, and other styles
31

Palumbo, G., E. M. Lehockey, and P. Lin. "Application of Microdiffraction in Sem for Assessing Intrinsic Materials Susceptibility to Intergranular Corrosion and Stress Corrosion Cracking." Microscopy and Microanalysis 3, S2 (1997): 573–74. http://dx.doi.org/10.1017/s1431927600009752.

Full text
Abstract:
Intergranular degradation processes (e.g., corrosion, stress corrosion cracking) are a frequent cause of premature and unpredictable service failure of engineering components. Since these processes cause component failure via propagation through the intercrystalline network, they are strongly dependent upon the distribution of specific grain boundary structures in the material. Previous studies have shown that grain boundaries crystallographically described by low Σ (Σ≤29) Coincidence Site Lattice (CSL) relationships can often selectively display a high resistance (and often immunity) to corro
APA, Harvard, Vancouver, ISO, and other styles
32

Kuzyukov, A. N., and G. O. Tatarchenko. "Protection of 12Kh18N10T austenitic steel against intercrystalline corrosion by the ozonization of media." Materials Science 31, no. 3 (1996): 400–402. http://dx.doi.org/10.1007/bf00558566.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Kyzioł, Lesław, and Kazimierz Czapczyk. "Influence of Heat Treatment on Stress-Corrosion Resistance of EN AW-AIZn5Mg1,5CuZr Alloy." Solid State Phenomena 199 (March 2013): 424–29. http://dx.doi.org/10.4028/www.scientific.net/ssp.199.424.

Full text
Abstract:
The aim of this study is to determine mechanical properties and stress-corrosion resistance of EN AW-AIZn5Mg1,5CuZr alloy from the aspect of microstructure changes depending on the applied heat treatment. Stress corrosion is caused by the effect of corrosion environment parallel to mechanical stress. It occurs when cracks appear in the metal which is exposed to a corrosion environment and static stretching stresses. The effect of the corrosion environment and stresses on the metal surface cause cracks which are placed perpendicularly to the direction of stretching stresses and may be intercrys
APA, Harvard, Vancouver, ISO, and other styles
34

Karfidov, Eduard A., Yuri P. Zaikov, Evgenia V. Nikitina, Konstantin E. Seliverstov, and Alexey V. Dub. "High-Temperature Passivation of the Surface of Candidate Materials for MSR by Adding Oxygen Ions to FLiNaK Salt." Materials 15, no. 15 (2022): 5174. http://dx.doi.org/10.3390/ma15155174.

Full text
Abstract:
The problem of tailoring the structural materials for MSR is solved by continuously overcoming the shortcomings of widely used materials and finding new ones. The materials commonly used in engineering may not be applicable for MSR due to their high corrosivity. Experiments were carried out to determine the corrosion rate of stainless steel 12Cr18Ni10Ti with different concentrations of oxide ions (by adding lithium oxide to the melt in the concentration range from 0 to 0.8 wt.%) in a FLiNaK melt. The formation of a protective oxygen-containing layer with a thickness of 1 micron has been realiz
APA, Harvard, Vancouver, ISO, and other styles
35

Dan, Mircea Laurentiu, Andrea Kellenberger, Delia Duca, et al. "Corrosion Resistance of AISI 442 and AISI 446 Ferritic Stainless Steels as a Support for PEMWE Bipolar Plates." Materials 16, no. 4 (2023): 1501. http://dx.doi.org/10.3390/ma16041501.

Full text
Abstract:
Cost reduction in bipolar plates in proton exchange membrane water electrolyzers has previously been attempted by substituting bulk titanium with austenitic stainless steels protected with highly conductive and corrosion-resistant coatings. However, austenitic steels are more expensive than ferritic steels due to their high nickel content. Herein we report on the corrosion resistance of two high chromium ferritic stainless steels, AISI 442 and AISI 446, as an alternative material to manufacture bipolar plates. Electrochemical corrosion tests have shown that AISI 442 and AISI 446 have similar c
APA, Harvard, Vancouver, ISO, and other styles
36

Kudriavtsev, A. S., K. A. Okhapkin, and S. A. Suvorov. "Effect of Interstitial Elements on Pitting and Intercrystalline Corrosion of Austenitic Chromium-Nickel Steel." Inorganic Materials: Applied Research 9, no. 6 (2018): 1175–81. http://dx.doi.org/10.1134/s2075113318060138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Panchishin, Yu A., V. A. Gorban', and S. G. Polyakov. "Evaluation of the intercrystalline corrosion susceptibility of type 20–10 chromium‐nickel deposited metal." Welding International 6, no. 3 (1992): 219–21. http://dx.doi.org/10.1080/09507119209548174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Timofeev, B. T., V. A. Fedorova, and A. A. Buchatskii. "Intercrystalline Corrosion Cracking of Welded Joints of the Austenitic Pipelines of Nuclear Power Plants." Materials Science 40, no. 5 (2004): 676–83. http://dx.doi.org/10.1007/s11003-005-0099-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Dergach, Tetyana, Diana Hlushkova, and Andrey Balev. "New Technologies of Grain Boundary Engineering of Materials for Improving the Corrosion Resistance of High Alloy Stainless Steel Pipes." Bulletin of Kharkov National Automobile and Highway University, no. 107 (December 26, 2024): 31. https://doi.org/10.30977/bul.2219-5548.2024.107.0.31.

Full text
Abstract:
Abstract. Problem. Pipes made of highly alloyed corrosion-resistant steels are widely used in corrosive-aggressive environments in priority industries. In connection with the increasing severity of their operating conditions, increased requirements for resistance to intercrystalline, pitting corrosion, corrosion cracking, and sulfide corrosion cracking under stress become the most important in accordance with the requirements of foreign and international standards. Previous studies have shown that currently operating technologies for the production of pipes do not meet the modern, comprehensiv
APA, Harvard, Vancouver, ISO, and other styles
40

Torop, V. M., M. D. Rabkina, and E. O. Davydov. "Study of intercrystalline corrosion cracking in welded joints of Chornobyl NPP pipelines. Materials science aspect." Tehničeskaâ diagnostika i nerazrušaûŝij kontrolʹ 2024, no. 4 (2024): 23–31. https://doi.org/10.37434/tdnk2024.04.04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Cai, Yangchuan, Zhen Luo, Mengnan Feng, Zuming Liu, Zunyue Huang, and Yida Zeng. "Effect of activator on mechanical properties and intercrystalline corrosion resistance of austenitic stainless steel weld." Journal of Materials Processing Technology 234 (August 2016): 243–48. http://dx.doi.org/10.1016/j.jmatprotec.2016.02.014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Filip, Ryszard, Andrzej Nowotnik, and Marek Góral. "Zirconia Modified Aluminide Coatings Deposited by VPA and CVD Methods." Solid State Phenomena 203-204 (June 2013): 220–23. http://dx.doi.org/10.4028/www.scientific.net/ssp.203-204.220.

Full text
Abstract:
The article presents the experimental trial to connect aluminizing methods: VPA and CVD. Inconel 713 alloy was used as the base material. The purpose of the process was to obtain a layer modified with more Zr than the coatings deposited by CVD. The conducted tests revealed intercrystalline corrosion in the area of β-NiAl phase granules, which indicates that precise selection of processing conditions is the key factor for Zr-modified aluminizing. The resultant microstructural faults of the layer, however, didn’t impair the properties PS-PVD-deposited ceramic layer. The zirconium content in the
APA, Harvard, Vancouver, ISO, and other styles
43

Hudeček, Pavel, and Petr Dostál. "Determination of Grain Size and Resistance to Corrosion of Stainless Steel Welded Pipes." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 65, no. 1 (2017): 25–33. http://dx.doi.org/10.11118/actaun201765010025.

Full text
Abstract:
Discover problems of welds is not so easy from time to time. Specially, If welding was made in rough environmental conditions such as high temperature, humidity and dusty wind. It is necessary to provide good conditions to realize basic step of welding. For welding, have been used welding procedures specification and procedure qualification record. However, difficult conditions, documentations rightness or human errors are always here. Common weld defects like cracks, porosity, lack of penetration and distortion can compromise the strength of the base metal, as well as the integrity of the wel
APA, Harvard, Vancouver, ISO, and other styles
44

Skołek, E., K. Dudzińska, J. Kamiński, and W. A. Świątnicki. "Corrosion Resistance of The Bearing Steel 67SiMnCr6-6-4 with Nanobainitic Structure." Archives of Metallurgy and Materials 60, no. 1 (2015): 503–9. http://dx.doi.org/10.1515/amm-2015-0081.

Full text
Abstract:
AbstractThe paper describes a comparative study of the corrosion resistance of bearing steel 67SiMnCr6-6-4 after two kinds of nanostructuring treatments and two kinds of conventional quenching and tempering treatments. The nanostructuring treatment consisted of austempering with an isothermal quenching at 240°C and 300°C. The conventional heat treatment consisted on quenching and tempering at 350°C for 1 h and quenching and tempering at 550°C for 1 h. Time and temperature of tempering was chosen so that the hardness of both samples (nanostructured as well as quenched and tempered) was similar.
APA, Harvard, Vancouver, ISO, and other styles
45

Shimizu, K., and K. Nisancioglu. "High Resolution SEM Investigation of Intercrystalline Corrosion on 6000-Series Aluminum Alloy with Low Copper Content." ECS Electrochemistry Letters 3, no. 9 (2014): C29—C31. http://dx.doi.org/10.1149/2.0041409eel.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Yushchenko, K. A., E. V. Loshakova, and V. N. Lipodaev. "Effect of nitrogen on the intercrystalline corrosion susceptibility of low carbon CrNi steels and weld metal." Welding International 2, no. 5 (1988): 410–13. http://dx.doi.org/10.1080/09507118809447488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Zholud, A. S., A. S. Derbyshev, and O. K. Utkin. "Study of the effect of heat treatment regime on improvement of steel 12kh18n10t intercrystalline corrosion resistance." Chemical and Petroleum Engineering 48, no. 3-4 (2012): 194–98. http://dx.doi.org/10.1007/s10556-012-9597-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Karfidov, E. A., E. V. Nikitina, K. E. Seliverstov, P. N. Mushnikov, and K. R. Karimov. "CORROSION BEHAVIOR OF 12Cr18Ni10Ti STEEL IN LiCl–KCl MELT CONTAINING ADDITIVES OF <i>f</i>-ELEMENT CHLORIDES." Расплавы, no. 4 (July 1, 2023): 377–84. http://dx.doi.org/10.31857/s0235010623040035.

Full text
Abstract:
When reprocessing spent nuclear fuel, it is supposed to use LiCl–KCl melt (0.49:0.51) in an inert atmosphere, all metal materials in this salt melt are extremely susceptible to corrosion, besides, during the processing of spent fuel, both the liquid (melt) and the gas phase are saturated with decay products that can act as additional oxidizing agents, increasing the aggressiveness of the environment. The pyrochemical technology of SNF includes operations such as soft chlorination, electrofining and metallization, implying the presence in the melt of compounds of chlorides of rare earth metals
APA, Harvard, Vancouver, ISO, and other styles
49

Minai, Oleksandr. "Визначення швидкості корозії основного конструкційного матеріалу сіток капілярних розділювачів фаз". Aerospace Technic and Technology, № 1 (27 лютого 2024): 43–55. http://dx.doi.org/10.32620/aktt.2024.1.04.

Full text
Abstract:
The subject of this study is the corrosion processes that occur in the fuel tanks of spacecraft with a long service life, the engines of which operate on chemically aggressive fuel components (FC): nitrogen tetroxide (NT) and asymmetric dimethylhydrazine (NDMH). The goal is to determine the reduction of wire diameters and the increase of cell sizes of capillary phase separator grids (PSG) because of the corrosion effect of the main structural material of the 12X18H10T stainless steel grid. Task: establishing the presence, type, and rate of corrosion of the main structural material of the PSG n
APA, Harvard, Vancouver, ISO, and other styles
50

Prikhodko, V. N., and L. G. Kirillova. "Verification of the model of interaction of an eddy-current transducer with components damaged by intercrystalline corrosion." NDT International 23, no. 6 (1990): 361. http://dx.doi.org/10.1016/0308-9126(90)90909-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!