To see the other types of publications on this topic, follow the link: Interdigitated back-contact solar cells.

Dissertations / Theses on the topic 'Interdigitated back-contact solar cells'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Interdigitated back-contact solar cells.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Callozzo, Alessandro. "Numerical simulation of interdigitated back contact hetero-junction solar cells." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/5252/.

Full text
Abstract:
The goal of this thesis is the application of an opto-electronic numerical simulation to heterojunction silicon solar cells featuring an all back contact architecture (Interdigitated Back Contact Hetero-Junction IBC-HJ). The studied structure exhibits both metal contacts, emitter and base, at the back surface of the cell with the objective to reduce the optical losses due to the shadowing by front contact of conventional photovoltaic devices. Overall, IBC-HJ are promising low-cost alternatives to monocrystalline wafer-based solar cells featuring front and back contact schemes, in fact, for IBC
APA, Harvard, Vancouver, ISO, and other styles
2

Elani, U. "The design, fabrication and assessment of interdigitated back contact silicon solar cells." Thesis, Cardiff University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.354744.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Green, Shawn E. "Interdigitated back-surface-contact solar cell modeling using Silvaco Atlas." Thesis, Monterey, California: Naval Postgraduate School, 2015. http://hdl.handle.net/10945/45861.

Full text
Abstract:
Approved for public release; distribution is unlimited<br>The Silvaco Atlas semiconductor modeling software was used to simulate an interdigitated back-surface-contact solar cell. The cell is modeled after the silicon-based Sunpower Corporation A-300 solar cell, which contains a number of unique features that give it advantages over conventional solar cells. This simulation attempted to match as closely as possible the results measured by the National Renewable Energy Laboratory from the A-300 cell in order to validate the model. This model was then used to investigate the effects of making th
APA, Harvard, Vancouver, ISO, and other styles
4

Chu, Haifeng [Verfasser]. "Interdigitated Back Contact Silicon Solar Cells : Metallization and Reverse Bias Characteristics / Haifeng Chu." Konstanz : KOPS Universität Konstanz, 2019. http://d-nb.info/1187136956/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Padilla, Milan [Verfasser]. "Spatially Resolved Characterization and Simulation of Interdigitated Back Contact Silicon Solar Cells / Milan Padilla." Aachen : Shaker, 2016. http://d-nb.info/1084536129/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

López, Rodríguez Gema. "Interdigitated back-contacted(IBC) c-Si solar cells based on laser processed dielectric layers." Doctoral thesis, Universitat Politècnica de Catalunya, 2016. http://hdl.handle.net/10803/404570.

Full text
Abstract:
The goal of this thesis is the fabrication of high-efficiency interdigitated back-contact (IBC) c-Si solar cell at low temperature and low-cost manufacturing technology. This thesis proposes a new concept and at the same time a simple and elegant fabrication process that has been fully developed and culminated with the fabrication of a "cold" IBC solar cell as a proof-of-concept. To carry out this proposal, we focus our research on the study and application of low-temperature processes such as Atomic Layer Deposition (ALD) and Plasma-enhanced Chemical Vapor Deposition (PECVD) to deposit diele
APA, Harvard, Vancouver, ISO, and other styles
7

Stang, Johann-Christoph [Verfasser], Bernd [Akademischer Betreuer] Rech, Stefan [Gutachter] Glunz, and García Isidro [Gutachter] Martín. "Interdigitated back contact silicon heterojunction solar cells : from the laboratory to industrial processes / Johann-Christoph Stang ; Gutachter: Stefan Glunz, Isidro Martín García ; Betreuer: Bernd Rech." Berlin : Technische Universität Berlin, 2018. http://d-nb.info/1168722217/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Masmitjà, Rusiñol Gerard. "Design, fabrication and characterisation of interdigitated back-contacted c-Si solar cells based on transition metal oxides." Doctoral thesis, Universitat Politècnica de Catalunya, 2019. http://hdl.handle.net/10803/667823.

Full text
Abstract:
The photovoltaic industry is mainly dominated by crystalline silicon (c-Si) solar cells, in which contact selectivity is usually achieved by doping the wafer surfaces with phosphorous (n+) and boron (p+) by means of high temperature oven-based diffusions, called pn-Junction (pnJ). This requires complex and energy consuming processes and lengthy cleaning protocols to avoid possible degradation of bulk lifetime, increasing the number of steps involved in the manufacturing and consequently the production cost. In order to replace those high temperature diffusions, several approaches have been st
APA, Harvard, Vancouver, ISO, and other styles
9

Wagner, Philipp [Verfasser], Bernd [Akademischer Betreuer] Rech, Bernd [Gutachter] Rech, Bert [Gutachter] Stegemann, and Olindo [Gutachter] Isabella. "Interdigitated back-contact silicon heterojunction solar cells: development of patterning techniques and applications in tandem devices / Philipp Wagner ; Gutachter: Bernd Rech, Bert Stegemann, Olindo Isabella ; Betreuer: Bernd Rech." Berlin : Technische Universität Berlin, 2021. http://d-nb.info/1227989962/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sonntag, Paul [Verfasser], Bernd Akademischer Betreuer] Rech, Bernd [Gutachter] Rech, Uwe [Gutachter] [Rau, and Marko [Gutachter] Topiĉ. "Interdigitated back-contacts for poly-crystalline thin-film silicon solar cells on glass / Paul Sonntag ; Gutachter: Bernd Rech, Uwe Rau, Marko Topiĉ ; Betreuer: Bernd Rech." Berlin : Technische Universität Berlin, 2017. http://d-nb.info/1156185289/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Sonntag, Paul Verfasser], Bernd [Akademischer Betreuer] Rech, Bernd [Gutachter] Rech, Uwe [Gutachter] [Rau, and Marko [Gutachter] Topiĉ. "Interdigitated back-contacts for poly-crystalline thin-film silicon solar cells on glass / Paul Sonntag ; Gutachter: Bernd Rech, Uwe Rau, Marko Topiĉ ; Betreuer: Bernd Rech." Berlin : Technische Universität Berlin, 2017. http://d-nb.info/1156185289/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Atteia, François. "Développement d'un procédé de texturation de surface du silicium et intégration sur des cellules photovoltaïques et photodétecteurs." Electronic Thesis or Diss., Aix-Marseille, 2020. http://www.theses.fr/2020AIXM0158.

Full text
Abstract:
Le piégeage de la lumière est un phénomène initialement observé dans la nature. Avec l’apparition de nouvelles technologies de réalisation à l’échelle nanométrique, il connaît aujourd’hui une forte évolution. Cette capacité à absorber la lumière est devenue essentielle pour un nombre croissant d’applications en particulier le photovoltaïque. Une de ces méthodes est la fabrication de nanostructures en surface du matériau. L’objectif principal de cette thèse est de développer un procédé de modification de la surface du silicium (appelé « Black Silicon ») à température ambiante par gravure plasma
APA, Harvard, Vancouver, ISO, and other styles
13

Jin, Chen. "Interdigitated back contacts solar cell based on thin crystalline silicon substrates." Doctoral thesis, Universitat Politècnica de Catalunya, 2018. http://hdl.handle.net/10803/666246.

Full text
Abstract:
This thesis contributes to the fabrication technology of c-Si solar cells on thin substrates based on Interdigitated Back-Contacted (IBC) structures. The potential of this structure to obtain high efficiencies is well-known. However, important challenges should be addressed to adapt it to thin c-Si substrates, such as the manufacturing of the thin c-Si substrate itself, light absorption enhancement, device structure design, surface passivation, etc. Focused on these challenges, experiments and simulations have been carried out, including innovative thin c-Si substrate fabrication method Millef
APA, Harvard, Vancouver, ISO, and other styles
14

Lamboll, Robin Davies. "Two-dimensional modelling of novel back-contact solar cells." Thesis, University of Cambridge, 2017. https://www.repository.cam.ac.uk/handle/1810/268518.

Full text
Abstract:
This dissertation computationally and analytically investigates ways to model solar cells when the lateral motion of charge carriers and light are relevant. We focus on back-contact perovskite solar cells, and assessing the experimental technique of scanning photocurrent microscopy as a means to investigate them. Solar cells are three-dimensional objects frequently modelled as being one-dimensional. However, for more complex designs of solar cell or if the cell is only point-illuminated, one-dimensional modelling is insufficient. In the first study, some conditions for reducing the complexity
APA, Harvard, Vancouver, ISO, and other styles
15

Al-Juffali, Abdullah Ali S. "Modelling, simulation and optimisation of back contact silicon solar cells." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329638.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Söderström, Wilhelm. "Alternative back contact for CIGS solar cells built on sodium-free substrates." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-154004.

Full text
Abstract:
It is widely known that the element sodium plays a vital role in providing highefficiency CIGS solar cells and that when cells are built on sodium free substrates theyneed an alternative (a substitute) sodium source. In this study a molybdenum-sodiumcompound has been deposited, investigated and evaluated as an alternative backcontact layer containing sodium. The compound had a 5 at % sodium concentrationand it was manufactured by an Austrian company called Plansee. The aim of the studywas to create an equivalent back contact in the sense of sodium delivery, conductivityand adhesion compared to
APA, Harvard, Vancouver, ISO, and other styles
17

Haase, Felix [Verfasser]. "Loss analysis of back-contact back-junction thin-film monocrystalline silicon solar cells / Felix Haase." Hannover : Technische Informationsbibliothek und Universitätsbibliothek Hannover (TIB), 2013. http://d-nb.info/1042066647/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Jayabal, Matheshkumar. "Molybdenum as a back contact for cucl treated cds/cdte solar cells." Scholar Commons, 2005. http://scholarcommons.usf.edu/etd/2937.

Full text
Abstract:
CdTe is one of the most promising absorbers for use in inexpensive semiconductor solar cells having achieved a high efficiency of 16.4% in small area cells [1]. One of the most important technological problems in obtaining high efficiencies is to have a good ohmic contact on the CdTe, which is characterized by a very high work function [2]. Cu is used as a dopant in CdTe at the contact to promote quantum mechanical tunneling [3]. But the oversupply of Cu causes the diffusion of Cu through CdTe to the underlying CdS layer resulting in the degradation of the cell performance. It has been reporte
APA, Harvard, Vancouver, ISO, and other styles
19

Zhao, Hehong. "Impurity and back contact effects on CdTe/CdS thin film solar cells." [Tampa, Fla] : University of South Florida, 2008. http://purl.fcla.edu/usf/dc/et/SFE0002377.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Zhao, Hehong. "Impurity and Back Contact Effects on CdTe/CdS Thin Film Solar Cells." Scholar Commons, 2007. https://scholarcommons.usf.edu/etd/580.

Full text
Abstract:
CdTe/CdS thin film solar cells are the most promising cost-effective solar cells. The goal of this project is to improve the performance for CdS/CdTe devices by improving the open circuit voltage Voc and current density Jsc. Efforts focused on increasing the Voc, which include increasing the doping concentration by introducing Phosphorus and Antimony, finding and testing new back contact materials, and varying the ambient of CSS CdTe. In addition, the effect of Zn2SnO4 on the cells' performance was also studied. Electrical characterization of the thin films and completed devices were carried o
APA, Harvard, Vancouver, ISO, and other styles
21

Woehl, Robert [Verfasser]. "All-Screen-Printed Back-Contact Back-Junction Silicon Solar Cells with Aluminum-Alloyed Emitter / Robert Woehl." München : Verlag Dr. Hut, 2012. http://d-nb.info/1023435179/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Mohanakrishnaswamy, Venkatesh. "Processing and characterization of CIGS - based solar cells." [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0000368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Schleussner, Sebastian Michael. "ZrN Back-Contact Reflectors and Ga Gradients in Cu(In,Ga)Se2 Solar Cells." Doctoral thesis, Uppsala universitet, Fasta tillståndets elektronik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-151402.

Full text
Abstract:
Solar cells constitute the most direct way of converting solar energy to electricity, and thin-film solar-cell technologies have lately been growing in importance, allowing the fabrication of less expensive modules that nonetheless have good power-conversion efficiencies. This thesis focuses on solar cells based on Cu(In,Ga)Se2, which is the thin-film technology that has shown the highest conversion efficiency to date, reaching 20.3 % on the laboratory scale. Solar modules still have some way to go to become entirely competitive with existing energy technologies, and there are two possible pat
APA, Harvard, Vancouver, ISO, and other styles
24

Guntur, Vasudha. "Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells." Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/3136.

Full text
Abstract:
CdTe solar cells in the superstrate configuration have achieved record efficiencies of 16% but those in the substrate configuration have reached efficiencies of only 7.8%. A major reason for the lower efficiency of substrate CdTe solar cells is the poor back contact. In this work, CdTe solar cells of the substrate configuration have been fabricated on flexible metallic substrates. For this type of devices, impurity diffusion out of stainless-steel substrates due to high temperature processing can be a cause for poor cell performance. It is necessary to investigate ways of improving the back co
APA, Harvard, Vancouver, ISO, and other styles
25

Erra, Swetha. "Stability studies of cdte solar cells with varying amounts of cu in the back contact." [Tampa, Fla.] : University of South Florida, 2005. http://purl.fcla.edu/fcla/etd/SFE0001050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Khanal, Rajendra R. "Carbon Single Wall Nanotubes: Low Barrier, Cu- Free Back Contact to CdTe Based Solar Cells." University of Toledo / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1396625969.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Khrypunov, G., A. Meriuts, H. Klochko, T. Shelest, and A. Khrypunova. "Investigation of thin film solar cells on CdS/CdTe base with different back contacts." Thesis, Trans Tech Publications, Switzerland, 2010. http://repository.kpi.kharkov.ua/handle/KhPI-Press/40526.

Full text
Abstract:
The peculiarities of photo-electric processes in thin film CdS/CdTe solar cells (SC) with different back electrodes (Cu/Au, ITO, Cu/ITO) havebeen studied. As it was established by capacitance – voltage (C-V) characteristics, the potential barrier heights for CdTe/Cu/Au and CdTe/ITO were 0.3 eV and 2.2 eV, respectively. The concentrations of charge carriers near back contact consisted 9⋅10²⁰ m⁻³ and 2⋅10²¹ m⁻³, respectively. A high carrier concentration and hi gh potential barrier of the ITO back contact caused the tunnel – recombination mechanism of the charge transport. The investigations of
APA, Harvard, Vancouver, ISO, and other styles
28

Gouillart, Louis. "Development of ultrathin Cu(In,Ga)Se ₂ –based solar cells with reflective back contacts." Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPASS007.

Full text
Abstract:
Réduire l’épaisseur de l’absorbeur des dispositifs photovoltaïques à base de couches minces est une voie prometteuse pour améliorer leur compétitivité industrielle, via une économie de matières premières et une cadence de production plus élevée. Cela peut aussi accroître leur efficacité en diminuant le parcours des porteurs de charge photogénérés. Cependant, l’efficacité des cellules solaires à base de Cu(In,Ga)Se ₂ (CIGS) ultramince avec une épaisseur d’absorbeur d’environ 500 nm, soit environ 5 fois inférieure aux cellules conventionnelles, est limitée par deux phénomènes : les recombinaison
APA, Harvard, Vancouver, ISO, and other styles
29

Spehar, Martin Edward Jr. "Numerical Simulations of Thin-Film Solar Cells with Novel Architectures." Bowling Green State University / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=bgsu1626276515324644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Takahashi, Eigo. "Correlation between preparation parameters and properties of molybdenum back contact layer for CIGS thin film solar cells." Master's thesis, University of Central Florida, 2010. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4554.

Full text
Abstract:
Molybdenum (Mo) thin film back contact layers for thin film CuIn(subscript 1-x])Ga[subscript] xSe[sub]2 (CIGS) solar cells were deposited onto soda lime glass substrates using a direct current (DC) planar magnetron sputtering deposition technique. Requirements for the Mo thin film as a back contact layer for CIGS solar cells are various. Sheet resistance, contact resistance to the CIGS absorber, optical reflectance, surface morphology, and adhesion to the glass substrate are the most important properties that the Mo thin film back contact layer must satisfy. Experiments were carried out under
APA, Harvard, Vancouver, ISO, and other styles
31

Hodges, Deidra Ranel. "Development of CdTe thin film solar cells on flexible foil substrates." [Tampa, Fla] : University of South Florida, 2009. http://purl.fcla.edu/usf/dc/et/SFE0003210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Dang, Hongmei. "Nanostructured Semiconductor Device Design in Solar Cells." UKnowledge, 2015. http://uknowledge.uky.edu/ece_etds/77.

Full text
Abstract:
We demonstrate the use of embedded CdS nanowires in improving spectral transmission loss and the low mechanical and electrical robustness of planar CdS window layer and thus enhancing the quantum efficiency and the reliability of the CdS-CdTe solar cells. CdS nanowire window layer enables light transmission gain at 300nm-550nm. A nearly ideal spectral response of quantum efficiency at a wide spectrum range provides an evidence for improving light transmission in the window layer and enhancing absorption and carrier generation in absorber. Nanowire CdS/CdTe solar cells with Cu/graphite/silver p
APA, Harvard, Vancouver, ISO, and other styles
33

Palekis, Vasilios. "CdTe/CdS Thin Film Solar Cells Fabricated on Flexible Substrates." Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/3280.

Full text
Abstract:
Cadmium Telluride (CdTe) is a leading thin film photovoltaic (PV) material due to its near ideal bandgap of 1.45 eV and its high optical absorption coefficient. The typical CdTe thin film solar cell is of the superstrate configuration where a window layer (CdS), the absorber (CdTe) and a back contact are deposited onto glass coated with a transparent electrode. Substrate CdTe solar cells where the above listed films are deposited in reverse are not common. In this study substrate CdTe solar cells are fabricated on flexible foils. The properties of the Molybdenum back contact, Zinc Telluride (Z
APA, Harvard, Vancouver, ISO, and other styles
34

Kadam, Ankur. "PREPARATION OF EFFICIENT CUIN1-XGAXSE2-YSY/CDS THIN-FILM SOLAR CELLS BY OPTIMIZING THE MOLYBDENUM BACK CONTACT AND USING DIETHYL." Doctoral diss., University of Central Florida, 2006. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4230.

Full text
Abstract:
High efficiency CuIn1-xGaxSe2-ySy (CIGSS)/CdS thin-film solar cells were prepared by optimizing the Mo back contact layer and optimizing the parameters for preparing CIGSS absorber layer using diethylselenide as selenium source. The Mo film was sputter deposited on 2.5 cm x 10 cm soda-lime glass using DC magnetron sputtering for studying the adhesion and chemical reactivity with selenium and sulfur containing gas at maximum film growth temperature. Mo being a refractory material develops stresses, nature of which depends on the deposition power and argon pressure. It was found that the deposit
APA, Harvard, Vancouver, ISO, and other styles
35

Bastola, Ebin. "CdTe Back Contact Engineering via Nanomaterials, Chemical Etching, Doping, and Surface Passivation." University of Toledo / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1596813646708798.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Watthage, Suneth C. "Solution-Processed Fabrication of Hybrid Organic-Inorganic Perovskites & Back Interface Engineering of Cadmium Telluride Solar Cells." University of Toledo / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1512390043951256.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Haug, Annegret Veronika [Verfasser], and H. [Akademischer Betreuer] Kalt. "Properties of the Back Contact Interface for Non-Vacuum Deposited Precursor-Based Cu(In,Ga)Se₂ Solar Cells / Annegret Veronika Haug ; Betreuer: H. Kalt." Karlsruhe : KIT-Bibliothek, 2018. http://d-nb.info/1155474317/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Neugebohrn, Nils [Verfasser], Maria S. [Akademischer Betreuer] Hammer, Jürgen [Akademischer Betreuer] Parisi, and Carsten [Akademischer Betreuer] Agert. "Electronic transport and potential barriers at the MoSe2-Mo back contact in Cu(In,Ga)Se2 solar cells / Nils Neugebohrn ; Maria S. Hammer, Jürgen Parisi, Carsten Agert." Oldenburg : BIS der Universität Oldenburg, 2016. http://d-nb.info/1115331205/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Couderc, Romain. "Etude du comportement thermique et électrique des cellules photovoltaïques en silicium cristallin sous concentration." Thesis, Lyon, INSA, 2015. http://www.theses.fr/2015ISAL0054/document.

Full text
Abstract:
Le silicium est très utilisé dans la production de cellules photovoltaïques mais très peu pour les applications sous concentration. Il possède pourtant un fort potentiel sous concentration grâce à son faible coût et la maturité de sa filière industrielle. De plus, il est possible d'avoir recours à la cogénération pour augmenter fortement les rendements énergétiques du système. La concentration et la cogénération impliquent un fonctionnement de la cellule à une température plus élevée que les conditions standards de test des cellules photovoltaïques. Cela engendre le besoin de connaître le comp
APA, Harvard, Vancouver, ISO, and other styles
40

Toura, Hanae. "Elaboration and characterization by electrochemical technique CZTS thin layers for photovoltaic application." Doctoral thesis, Universitat Politècnica de València, 2020. http://hdl.handle.net/10251/154334.

Full text
Abstract:
[EN] The increase in energy needs, particularly in terms of environmental protection, has greatly stimulated research in the field of photovoltaic conversion in recent years. Solar radiation provides an excellent resource for producing clean and sustainable electricity without toxic pollution or global warming, but in terms of high demand for energy for electricity production as well as the toxicity or scarcity of components constitute the solar cells, this solar transformation technology is still somewhat limited. Because these parameters constitute the main environmental concerns surro
APA, Harvard, Vancouver, ISO, and other styles
41

Yao, Chih-Kuang, and 姚祉光. "Investigation of Interdigitated Back Contact Structure for Monocrystalline Silicon Solar Cells." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/90811707706579088876.

Full text
Abstract:
碩士<br>國立中興大學<br>材料工程學系所<br>99<br>Recently, the interdigitated back contact solar cell (IBC-SC) has received much attention because the metal electrodes can be fabricated on the rear side of the cell. The IBC-SC has no shadowing effect. In this thesis, firstly, the process recipes including surface texturization, anti-reflection coating, and diffusion process were established. Then, the design and study of standard processes for the silicon wafer verification were performed. The IBC-SC was fabricated using high-temperature diffusion and photolithography techniques. The pattern design of interdi
APA, Harvard, Vancouver, ISO, and other styles
42

Wu, Sheng-Wei, and 吳聲瑋. "The Study of Pitch Width for Interdigitated Back Contact Solar Cells." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/23610276354615679976.

Full text
Abstract:
碩士<br>中華大學<br>電機工程學系碩士班<br>100<br>Over the last decade, many research has gone into the development of more efficient alternate energy technologies, especially solar photovoltaic cells, are becoming progressively more desirable, innovative and cost-effective photovoltaic cell designs are being researched to make the technology economically competitive. Current efforts in the bulk silicon solar cell technology to increase efficiencies and lower processing costs are leaning towards thinner wafers, low-temperature continuous processing, and superior passivation and metallization schemes. Interdig
APA, Harvard, Vancouver, ISO, and other styles
43

Logiudice, Vito. "Design, fabrication and testing of silicon interdigitated back contact (IBC) solar cells." Thesis, 1993. http://spectrum.library.concordia.ca/2974/1/MM87320.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Hsin, Pi-Yu, and 辛璧宇. "Screen-printed Interdigitated Back Contact Solar Cells on Cz P-type Wafer." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/s9tz8s.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Lee, Tai-Hsin, and 李泰鑫. "Self-aligned interdigitated diffusion process for back-contact solar cell." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/87915430258964719880.

Full text
Abstract:
碩士<br>國立臺灣科技大學<br>電子工程系<br>102<br>Due to both polarities of the metal electrodes on the rear side of the device, IBC solar cell exhibits some advantages over the conventional solar cell with metal contacts on both sides, such as increased short circuit current and improved series resistance. In the thesis self–aligned diffusion processes for intedigitated back- contact solar cell were studied. The fabrication of IBC solar cell includes six main steps: formation of N+ diffusion layer, electrical isolation, formation P+ contact layer, metallization, substrate thinning, and device characterizatio
APA, Harvard, Vancouver, ISO, and other styles
46

Tsai, Zheng-Gang, and 蔡政剛. "Simulation of Interdigitated Back Contact Solar Cells andExperimental Analysis of Emitter Recombination Current." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/76130033569414404573.

Full text
Abstract:
碩士<br>國立臺灣大學<br>光電工程學研究所<br>103<br>In this thesis, the characteristics of emitter of n-type Si-based solar cells are investigated and the enhancements of n-type Si-based interdigitated back contact (IBC) solar cells are also studied. The goals of this thesis are to optimize the parameter of solar cells by numerical simulations using technology computer aided design (TCAD) simulator to provide concepts to improve the performances of cells. Firstly, we vary the surface recombination velocity (SRV), the bulk lifetime and emitter ratio. Then, we simulate the process of the ion implantation by nume
APA, Harvard, Vancouver, ISO, and other styles
47

Chen, Jin-Song, and 陳錦松. "Fabrication and Photovoltaic Characterization of Interdigitated Back Contact Single Crystalline Silicon Solar Cells." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/17263378795899121559.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系碩士班<br>101<br>This thesis is mainly to fabricate and analyze the photovoltaic characteristic of the interdigitated back contact (IBC) single crystalline silicon solar cells. The IBC solar cells (IBCSCs) have an excellent light trapping ability to enhance the power conversion efficiency (PCE) of solar cells due to all the metal electrodes of p- and n-type emitters are made on the back-side of IBCSCs. In this study, the 6 inch, (100), n-type silicon wafer with a thickness of 200 μm is used to fabricate the IBCSC. The fabrication process of IBCSCs include with many ICs proc
APA, Harvard, Vancouver, ISO, and other styles
48

Maccaronio, Vincenzo, Pietro Pantano, Giuseppe Cocorullo, and Felice Crupi. "Design of interdigitated back-contact solar cells by means of TCAD numerical simulations." Thesis, 2017. http://hdl.handle.net/10955/1309.

Full text
Abstract:
Dottorato ""Archimede" in Scienze Comunicazione e Tecnologie, Ciclo XXVIII, a.a. 2015-2016<br>La promessa dell’energia solare come forma di energia principale è sempre più concreta, ma il nodo cruciale rimane il costo per Watt, che deve essere sempre di più avvicinato o finanche ulteriormente ridotto rispetto a quello delle reti di distribuzione energetiche esistenti. Un lavoro di ottimizzazione in termini di design e parametri di fabbricazione è quindi fondamentale per raggiungere questo obiettivo. Il silicio cristallino è il materiale maggiormente diffuso nell’industria fotovoltaica, p
APA, Harvard, Vancouver, ISO, and other styles
49

Liu, Mi-Ni, and 劉宓霓. "Study of Fabrication Process Optimization of Interdigitated Back Contact (100) Mono-crystalline Silicon Solar Cells." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/17829008227727595667.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系<br>102<br>This thesis is mainly to study the fabrication process optimization of interdigitated back contact (IBC) (100) mono-crystalline silicon solar cells (SCs). In this study, the 6 inch, (100), n-type CZ silicon wafer with a minority carrier lifetime of 30 μs, a thickness of 200 μm and a resistivity (ρ) of 2-7 ohm-cm is used as the starting substrate to fabricate IBCSCs by using the standard ICs and crystalline silicon (c-Si) solar cells processes. After the IBCSCs are completed, the solar simulator is used to measure and analyze the photovoltaic characteristic of
APA, Harvard, Vancouver, ISO, and other styles
50

Hsu, Chuai-Hong, and 徐忠鴻. "Study of Photoluminescence Nanomaterials for Interdigitated Back Contact (100) Mono-crystalline Silicon Solar Cells Application." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/9wpstr.

Full text
Abstract:
碩士<br>國立雲林科技大學<br>機械工程系<br>103<br>This thesis is mainly to fabricate and analyze the photovoltaic characteristic of the interdigitated back contact (IBC) single crystalline silicon solar cells. The IBC solar cells (IBCSCs) have an excellent light trapping ability to enhance the power conversion efficiency (PCE) of solar cells due to all the metal electrodes of p- and n-type emitters are made on the back-side of IBCSCs. In this study, the 6 inch, (100), n-type silicon wafer with a thickness of 200 µm is used to fabricate the IBCSC. In order to investigate the potential application of down-conve
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!