Relevant bibliographies by topics / Interelectrode gap

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Interelectrode gap'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Interelectrode gap.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Interelectrode gap"

1

Xin, Bin, Ming Gao, Shujuan Li, and Bin Feng. "Modeling of Interelectrode Gap in Electric Discharge Machining and Minimum Variance Self-Tuning Control of Interelectrode Gap." Mathematical Problems in Engineering 2020 (March 9, 2020): 1–20. http://dx.doi.org/10.1155/2020/5652197.

Full text
Abstract:
In the electric discharge machining system, the determination of the gap between the anode and the cathode is a difficult point of this kind of machining approach. An accurate mathematical model of interelectrode gap is obtained, and the precise control of the gap is achieved on this basis. In this paper, based on the example of discharge machining of P-type single crystal Si, the theoretical analysis proved that the discharge channel can be equivalent to pure resistance, and the physical model of the interelectrode gap and voltage and current was established. The order and parameters of the E
APA, Harvard, Vancouver, ISO, and other styles
2

Arash Zulkarnain Ahmad Rozaini, Abdullah Abdulhameed, Revathy Deivasigamani та ін. "Characterization of 20 μm Dielectrophoretic Interelectrode Gap for Staphylococcus Aureus Rapid Detection Application". International Journal of Nanoelectronics and Materials (IJNeaM) 17, June (2024): 281–86. http://dx.doi.org/10.58915/ijneam.v17ijune.869.

Full text
Abstract:
We propose an improvement of dielectrophoresis technique (DEP) by designing, simulating and experiment a 20 μm interelectrode gap for Staphylococcus aureus rapid detection application. In this paper, we use MyDEP simulation for DEP polarization Staphylococcus aureus on frequencies range. COMSOL simulation is utilized for comparison of 20 μm and 80 μm interelectrode gap based on trajectory and velocity of particles for Staphylococcus aureus application. We implied 20 μm interelectrode gap for Staphylococcus aureus application produced higher magnitude DEP force. Which gives accurate trajectory
APA, Harvard, Vancouver, ISO, and other styles
3

Strelchuk, Roman, and Oleksandr Shelkovyi. "SIMULATION OF THE INTERELECTRODE GAP IN ELECTRICAL DISCHARGE GRINDING WITH CHANGING ELECTRODE POLARITY." Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry, no. 2 (October 2, 2022): 88–95. http://dx.doi.org/10.20998/2079-004x.2022.2(6).12.

Full text
Abstract:
In this paper, an experimental study and simulation in the Simulink graphical environment of the interelectrode gap during electroerosive grinding with changing polarity of electrodes of difficult-to-machine materials was carried out. Based on the experimentally obtained oscillograms of currents and voltages in the cutting zone, a simulation model of the interelectrode gap has been developed. The model implements a nonlinear dependence of the active resistance of the interelectrode gap on its value, which makes it possible to take into account the influence of the interelectrode medium on the
APA, Harvard, Vancouver, ISO, and other styles
4

Xin, Bin, Shujuan Li, Xincheng Yin, and Xiong Lu. "Dynamic Observer Modeling and Minimum-Variance Self-Tuning Control of EDM Interelectrode Gap." Applied Sciences 8, no. 9 (2018): 1443. http://dx.doi.org/10.3390/app8091443.

Full text
Abstract:
The electric discharge machining (EDM) interelectrode gap directly determines the discharge state, which affects the machining efficiency, workpiece surface quality, and the tool wear rate. The measurement of the real-time varying interelectrode gap during machining is extremely difficult, and so obtaining an accurate mathematical model of the dynamic interelectrode gap will make EDM gap control possible. Based on p-type single-crystal silicon EDM, a flat-plate capacitance model is introduced to analyze the time-domain characteristics of the inter-electrode voltage in the breakdown delay phase
APA, Harvard, Vancouver, ISO, and other styles
5

Тренькин, А. А., К. И. Алмазова, А. Н. Белоногов та ін. "Динамика начальной фазы искрового и диффузного разрядов в воздухе в промежутке острие--плоскость при различных параметрах острийного электрода". Журнал технической физики 89, № 4 (2019): 512. http://dx.doi.org/10.21883/jtf.2019.04.47305.309-18.

Full text
Abstract:
AbstractDynamics of the initial stage of discharge in air is studied at atmospheric pressure in a point–plane gap at different parameters of the tip electrode and lengths of the interelectrode gap. Spark or diffuse discharges are implemented in experiments depending on the length of the interelectrode gap. Shadow photography is used to show that, for all electrodes in the experiments, the discharge channels represent multiple microchannels that develop from the tip and close the discharge gap.
APA, Harvard, Vancouver, ISO, and other styles
6

Kamaraj, Abishek B., and Murali M. Sundaram. "Analytical and Experimental Study of Electrochemical Micromilling." International Journal of Manufacturing, Materials, and Mechanical Engineering 5, no. 2 (2015): 1–16. http://dx.doi.org/10.4018/ijmmme.2015040101.

Full text
Abstract:
Electrochemical micromachining (ECMM) is a non-conventional manufacturing method suitable for the production of microsized components on a wide range of conductive materials. ECMM improves dimensional accuracy and simplifies tool design for machining hard, high strength, heat resistant, and conductive materials into complex shapes. Extremely small interelectrode gaps of the order of few microns are required in ECMM for better dimensional accuracy. However, excessively small interelectrode gaps may lead to complications, such as short-circuiting, which disrupt the stability of ECMM process. Thi
APA, Harvard, Vancouver, ISO, and other styles
7

Bimurzaev, S. B., and Z. S. Sautbekova. "INFLUENCE OF THE INTERELECTRODE GAP WIDTH ON THE QUALITY OF FOCUSING OF ELECTROSTATIC MIRRORS WITH ROTATIONAL SYMMETRY." Eurasian Physical Technical Journal 21, no. 4(50) (2024): 149–57. https://doi.org/10.31489/2024no4/149-157.

Full text
Abstract:
The influence of the width of the interelectrode gap on the focusing quality of electrostatic mirrors with rotational symmetry, the electrodes of which are coaxial cylinders of equal diameter separated by gaps of finite width, has been studied. Formulas, convenient for the numerical calculation of the exact values ​​of the axial potential distribution in such mirrors, are proposed. Using the obtained formulas in numerical calculations and taking into account the width of the interelectrode gap, the geometric and electrical parameters of two- and three-electrode mirrors were determined, which p
APA, Harvard, Vancouver, ISO, and other styles
8

Smirnov, A. P., and O. V. Khvoshchan. "Investigation of the Influence of Technological Operating Conditions of Electric Discharge Installations on the Pre-Breakdown Characteristics of an Electric Discharge." Elektronnaya Obrabotka Materialov 58, no. 5 (2022): 71–84. http://dx.doi.org/10.52577/eom.2022.58.5.71.

Full text
Abstract:
This work deals with the influence of the parameters of the working fluid (hydrostatic pressure, temperature, electrical conductivity) and the geometry of the electrode system (the length of the interelectrode gap and the uninsulated part of the anode) on the pre-breakdown characteristics of an electric discharge in a liquid aqueous electrolyte (breakdown voltage and breakdown delay time) and the minimum charging voltage, which provides a stable high-voltage breakdown of the interelectrode gap. Studies have shown that an increase in the hydrostatic pressure leads to an increase in most of the
APA, Harvard, Vancouver, ISO, and other styles
9

Миназетдинов, Н. М. "Electrochemical machining of metals with motionless cathode-tools." Vestnik of Russian New University. Series «Complex systems: models, analysis, management», no. 2 (June 28, 2024): 3–9. http://dx.doi.org/10.18137/rnu.v9187.24.02.p.3.

Full text
Abstract:
Построена математическая модель двумерной задачи электрохимической обработки металлов неподвижным катодом-инструментом. Электрическое поле в межэлектродном промежутке описывается моделью идеального процесса. Выполнены расчеты безразмерных координат точек искомой границы и времени ее обработки для различных значений начального межэлектродного зазора. A mathematical model of two-dimensional problem of electrochemical machining of metals with a fixed cathode-tool is constructed. The electric field in the interelectrode gap is described by the model of “ideal process”. Dimensionless coordinates of
APA, Harvard, Vancouver, ISO, and other styles
10

Chernika, I.M., M.K. Bologa, O.I. Mardarskii, and I.V. Kozhevnikov. "Peculiarities of Nucleate Boiling Heat Transfer in Electroconvective Flow." Elektronnaya Obrabotka Materialov 55(2) (April 15, 2019): 44–51. https://doi.org/10.5281/zenodo.2629550.

Full text
Abstract:
The effect of the electric field strength and interelectrode gap distance on the main parameters of the boiling process under electrohydrodynamic flow conditions is studied. It is established that an increase of the heat flux density results in a decrease of the field effect. The optimal interelectrode gap distance corresponding to the maximum heat transfer is found. The hydrodynamics of the two-phase flow and its influence on the heat transfer intensity is analyzed on the base of visual observations and high-speed filming of the process. The calculated dependences are in satisfactory agreemen
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Interelectrode gap"

1

Павлов, А. Г. "Электроискровое легирование при использовании порошков". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66634.

Full text
Abstract:
Среди существующих вариантов контактного электроискрового нанесения покрытий дисперсными материалами существует два способа, которые дают возможность осуществлять тонкую дозировку подаваемого в межэлектродный промежуток (МЭП) порошка.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Interelectrode gap"

1

Ruszaj, A., M. Chuchro, and M. Zybura-Skrabalak. "The Influence of Phenomena Occurring Into Interelectrode Gap on Accuracy of Electrochemical Machining." In Proceedings of the Thirty-First International Matador Conference. Macmillan Education UK, 1995. http://dx.doi.org/10.1007/978-1-349-13796-1_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Strelchuk, Roman, and Oleksandr Shelkovyi. "Optimization of the Interelectrode Gap in Electrical Discharge Grinding with Changing Electrode Polarity." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77719-7_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Apollonov, V. V. "Feasibility of Increasing the Interelectrode Distance in an SSVD by Filling the Discharge Gap with Electrons." In High-Energy Molecular Lasers. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33359-5_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Golabczak, Andrzej, Andrzej Konstantynowicz, and Marcin Golabczak. "Mathematical Modelling of the Physical Phenomena in the Interelectrode Gap of the EDM Process by Means of Cellular Automata and Field Distribution Equations." In Advanced Structured Materials. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00506-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Taranchuk, Alla, and Sergey Pidchenko. "Design Methodology to Construct Information Measuring Systems Built on Piezoresonant Mechanotrons with a Modulated Interelectrode Gap." In Applied Measurement Systems. InTech, 2012. http://dx.doi.org/10.5772/35746.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Folgueiras-Amador, A. A., J. W. Hodgson, and R. C. D. Brown. "13 Electrochemistry in Laboratory Flow Systems." In Electrochemistry in Organic Synthesis. Georg Thieme Verlag KG, 2022. http://dx.doi.org/10.1055/sos-sd-236-00258.

Full text
Abstract:
Organic electrosynthesis in flow reactors is an area of increasing interest, with efficient mass transport and high electrode area to reactor volume present in many flow electrolysis cell designs facilitating higher rates of production with high selectivity. The controlled reaction environment available in flow cells also offers opportunities to develop new electrochemical processes. In this chapter, various types of electrochemical flow cells are reviewed in the context of laboratory synthesis, paying particular attention to how the different reactor environments impact upon the electrochemic
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Interelectrode gap"

1

Zhu, D., and K. P. Rajurkar. "Modeling and Verification of Interelectrode Gap in Electrochemical Machining With Passivating Electrolyte." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0719.

Full text
Abstract:
Abstract The industrial applications of Electrochemical Machining (ECM) technology are limited due to difficulties in tool design, monitoring and control, and sludge generation and disposal. An accurate modeling and prediction of interelectrde gap (i.e. the gap between tool electrode and workpiece electrode) is one of the most important steps to minimize these difficulties. The interelectrode gap distribution depends on electric field distribution which is a function of many process parameters varying in space and time during electrochemical dissolution process. This paper proposes a model and
APA, Harvard, Vancouver, ISO, and other styles
2

Buyanov, A. V., V. L. Dernovsky, and Y. K. Stishkov. "Interelectrode gap size influence on EHD flow kinematics." In Proceedings of 2005 International Symposium on Electrical Insulating Materials, 2005. (ISEIM 2005). IEEE, 2005. http://dx.doi.org/10.1109/iseim.2005.193427.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Parfenov, M. V., A. V. Tronev, P. M. Agruzov, I. V. Ilichev, and A. V. Shamrai. "SINGLE-MODE OPERATION REGIME OF AN INTEGRATED OPTICAL MODULATOR BASED ON TFLN USING NARROW INTERELECTRODE GAP." In Actual problems of physical and functional electronics. Ulyanovsk State Technical University, 2023. http://dx.doi.org/10.61527/appfe-2023.224-227.

Full text
Abstract:
The results of investigation of modal filtering and providing quasi single-mode operation regime of an inherently multimode optical waveguide phase modulator based on thin-film lithium niobate (TFLN) are presented. It was shown that decrease of interelectrode gap can induce different propagation losses to optical modes of an multimode waveguide. It was also shown that decrease of interelectrode gap and narrowing distance between edges of electrodes and the waveguide can provide high-order mode suppression at the level of 60 dB/cm.
APA, Harvard, Vancouver, ISO, and other styles
4

Kozlov, Oleg F., Yuri V. Nikolaev, Valeri Vybyvanets, Paul Agnew, David Olson, and Kevin R. Zavadil. "Research of ceramic materials stability in thermionic converter interelectrode gap." In Proceedings of the 12th symposium on space nuclear power and propulsion: Conference on alternative power from space; Conference on accelerator-driven transmutation technologies and applications. AIP, 1995. http://dx.doi.org/10.1063/1.47176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mullya, Satish A., G. Karthikeyan, Ranjit S. Patil, and Rajkumar B. Patil. "Observation at the Interelectrode Gap of Micro Electric Discharge Milling." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8280.

Full text
Abstract:
Abstract The rapid phenomenon happening at the interelectrode gap (IEG) of 50 microns in the micro electric discharge milling (μED-milling) is complex. Various techniques such as computational fluid dynamics (CFD), scanning electron microscope (SEM), and the high-speed camera is utilized to study the behavior. As multiple process occurs in microseconds, high-speed video camera is useful to capture rapidly occurring events. The actual process images at the interelectrode gap (IEG) of the micro electric discharge milling (μED-milling) is captured using a high-speed video camera pco. dimax HS4 hi
APA, Harvard, Vancouver, ISO, and other styles
6

Taranchuk, Alla, Segey Pidchenko, and Olena Skovryha. "Design methodology of piezoresonant sensors construction with a modulated interelectrode gap." In 2015 IEEE 35th International Conference on Electronics and Nanotechnology (ELNANO). IEEE, 2015. http://dx.doi.org/10.1109/elnano.2015.7146913.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kozak, J., and K. P. Rajurkar. "Pressure Generated During Pulse Electrochemical Machining." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/med-23342.

Full text
Abstract:
Abstract Pulse electrochemical machining (PECM) provides an economical and effective method for machining high strength, heat-resistant materials into complex shapes such as turbine blades of titanium alloys. The dimensional accuracy of PECM can be improved if a small interelectrode gap is maintained. This paper presents an interelectrode gap model for estimating pulse pressure generated after pulse current switched on, and the subsequent dynamic loading on the electrodes during PECM. A specially built PECM cell and a high-speed data acquisition system are used to measurement of wave pressure
APA, Harvard, Vancouver, ISO, and other styles
8

Kamaraj, Abishek Balsamy, Rachael Dyer, and Murali M. Sundaram. "Pulse Electrochemical Micromachining of Tungsten Carbide." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7238.

Full text
Abstract:
Pulse electrochemical micromachining (PECMM) is a non-conventional manufacturing method suitable for the production of micro-sized components on a wide range of conductive materials. PECMM improves dimensional accuracy and simplifies tool design in machining hard, high strength, and heat resistant materials into complex shapes. Extremely small interelectrode gaps are required in PECMM for better dimensional accuracy. However, excessively small interelectrode gaps may lead to complications like short-circuiting. This imposes the need for better control of the PECMM process. In this study a feed
APA, Harvard, Vancouver, ISO, and other styles
9

Higashiyama, Masakazu, Tatsuya Hirose, Takashi Hayama, Shuhei Nakamura, Masayuki Hikita, and Masahiro Kozako. "Breakdown voltage of interelectrode gap between sphere-plane electrodes under ac voltage." In 2010 IEEE International Symposium on Electrical Insulation (ISEI). IEEE, 2010. http://dx.doi.org/10.1109/elinsl.2010.5549810.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Grigoriev, Sergey N., Marina A. Volosova, and Anna A. Okunkova. "Automated Monitoring of Energy Pulses and Interelectrode Gap in Electrical Discharge Machining." In 2024 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM). IEEE, 2024. http://dx.doi.org/10.1109/icieam60818.2024.10553688.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Interelectrode gap' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography