Books on the topic 'Interferometers – Design and construction – Research'

Sustainable design of research laboratories: Planning, design, and operation. Hoboken, N.J: John Wiley & Sons, 2010.

Building type basics for research laboratories. 2nd ed. Hoboken, N.J: Wiley, 2008.

Design and planning of research and clinical laboratory facilities. New York: J. Wiley, 1995.

Design with knowledge: New research in sustainable building. Copenhagen: Henning Larsen Architects, 2012.

Duangratana, Songsawasdi. Research associated with foundation improvement for road construction on soft Bangkok clay. Bangkok: Dept. of Highways, Ministry of Transport and Communications, 1993.

Janssen, Donald J. PCC mix design: Final report, Research Project GC8286, Task 1, PCC Mix Design. [Olympia, Wash.?]: Washington State Dept. of Transportation, Planning, Research and Public Transportation Division, in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1989.

International, Specialty Conference on Cold-Formed Steel Structures (8th 1986 St Louis Mo ). Recent research and developments in cold-formed steel design and construction. [Rolla, Mo.]: Department of Civil Engineering, University of Missouri-Rolla, 1986.

Dow, Marvin B. The ACEE program and basic composites research at Langley Research Center (1975 to 1986): Summary and bibliography. Washington, D.C: National Aeronautics and Space Administration, Scientific and Technical Information Office, 1987.

Fitzpatrick, Kay. Recent geometric design research for improved safety and operations. Washington, D.C: National Academy Press, 2001.

Oregon Health and Science University. Oregon Health and Science University: Biomedical research building construction audit. Salem, OR: Secretary of State, Audits Division, 2007.

David, Baker. Research planes. Vero Beach, FL: Rourke Enterprises, 1987.

Hinze, Jimmie. Analysis of WSDOT construction cost overruns: Final report, Research Project GC8719, Task 12, Construction Cost Overruns. [Olympia, Wash.]: Washington State Dept. of Transportation, Planning, Research and Public Transportation Division, in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1991.

Vahidov, Rustam. Design-type research in information systems: Findings and practices. Hershey, PA: Information Science Reference, 2012.

Sorensen, Harold C. Bridge--standard systems: Final report, research project Y-3400, task 12. [Olympia, Wash.]: Washington State Transportation Center, 1987.

Ceccarelli, Marco. Service robots and robotics: Design and application. Hershey PA: Engineering Science Reference, 2012.

Canada, Transportation Association of. National agenda for technological research and development in transportation. Ottawa: The Association, 1994.

Ashton, Sean James. Design, Construction and Research Application of a Differential Electrochemical Mass Spectrometer (DEMS). Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30550-4.

A, Angleitner, and Ruch W, eds. Die Multitrait-Multimethod Analyse: Konvergente und diskriminante Validität der Personality Research Form. Göttingen: C.J. Hogrefe, 1986.

Burke, Martin P. Bridge aesthetics bibliography: Presented at the Transportation Research Board's 66th Annual Meeting, January 1987. [Columbus, Ohio]: Burgess & Niple, 1987.

Scott, Sidney. Guidebook to highway contracting for innovation: The role of procurement and contracting approaches in facilitating the implementation of research findings. Washington, D.C: National Academy Press, 1999.

Hessler, Jack R., and Noel D. M. Lehner. Planning and designing research animal facilities. Amsterdam: Elsevier/Academic Press, 2009.

International workshop: Research Needs in Dam Safety (1st 1989 New Delhi, India). International workshop : research needs in dam safety. New Delhi: Central Board of Irrigation and Power, 1989.

Stough, H. Paul. Flight investigation of the effect of tail configuration on stal, spin, and recovery characteristics of a low-wing general aviation research airplane. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.

Stough, H. Paul. Flight investigation of the effect of tail configuration on stal, spin, and recovery characteristics of a low-wing general aviation research airplane. [Washington, DC]: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.

Assoufid, Lahsen. Advances in metrology for x-ray and EUV optics III: 1-2 August 2010, San Diego, California, United States. Edited by SPIE (Society). Bellingham, Wash: SPIE, 2010.

Symposium on Indian Automotive Technology (3rd 1989 Pune, India). Third symposium on Indian automotive technology, 18 - 21 Jan. 1989 at Automotive Research Association of India, Pune. [Pune: The Association, 1989.

Moore, Gary T. Educational facilities for the twenty-first century: Research analysis and design patterns. Milwaukee, Wis: Center for Architecture and Urban Planning Research, Univ. of Wisconsin-Milwaukee, 1994.

Symposium on International Automotive Technology (2007 ARAI). Symposium on International Automotive Technology: 17-20 January 2007, ARAI, Pune, India : [proceedings]. Pune: Automotive Research Association of India, 2007.

Symposium on International Automotive Technology (2005 ARAI). Symposium on International Automotive Technology: Held at ARAI, Pune, 19-22 January 2005. Pune: Automotive Research Association of India, 2005.

Symposium on International Automotive Technology (2009 ARAI). Symposium on International Automotive Technology. Pune: Automotive Research Association of India, 2009.

Symposium on International Automotive Technology (2011 ARAI). Symposium on International Automotive Technology. Pune: Automotive Research Association of India, 2011.

National Research Council (U.S.). Committee on Advanced Automotive Technologies Plan. Review of the research and development plan for the Office of Advanced Automotive Technologies. Washington, D.C: National Academy Press, 1998.

Symposium on International Automotive Technology (2001 Automotive Research Association of India). Symposium on International Automotive Technology: Proceedings : [10th-13th January, 2001]. Pune: Automotive Research Association of India, 2001.

DiMillio, Albert F. A quarter century of geotechnical research. McLean, VA: Federal Highway Administration, 1999.

N, Mortensen Frederik, ed. Progress in autonomous robot research. New York: Nova Science Publishers, 2008.

(Contributor), Helmut Bleher, Hannelore Deubzer (Contributor), Jürgen Eichler (Contributor), Oswald W. Grube (Contributor), Gerhard Hausladen (Contributor), Hana Meindl (Contributor), Manfred Hegger (Contributor), et al., eds. Research and Technology Buildings: A Design Manual (Design Manuals). Birkhäuser Basel, 2005.

Delfs, Holger. A magneto-optic trap for rubidium. 1992.

Delfs, Holger. A magneto-optic trap for rubidium. 1992.

Susan, Braybrooke, and Goodman Harrison, eds. Design for research: Principles of laboratory architecture. New York: Wiley, 1986.

National Research Council (U.S.). Transportation Research Board. Meeting, ed. Bridge research, 1990. Washington, D.C: Transportation Research Board, National Research Council, 1990.

(US), National Research Council. Bridge Research, 1990 (Transportation Research Record, 1275.) (Photocopy Ed.). Transportation Research Board National Resear, 1990.

Advances in Metrology for X-Ray and EUV Optics II: 30 August 2007, San Diego, California, USA. SPIE, 2007.

Zhe, Zhang. Bridge Research and Development for 30 Years. Nova Science Publishers, Incorporated, 2015.

F, Pischinger Franz, and Society of Automotive Engineers, eds. German automotive research series. Warrendale, PA: Society of Automotive Engineers, 1988.

Construction: Quality Control and Specifications (Transportation Research Record). Transportation Research Board, 1985.

Fire Safe Steel Construction: Practical Design (Technical Steel Research, 82). European Communities, 1985.

Don, Goodsell, ed. International directory of automotive research. Warrendale, PA: Society of Automotive Engineers, 1991.

Kayabekir, Aylin Ece, Gebrail Bekdas, and Sinan Melih Nigdeli. Metaheuristic Approaches for Optimum Design of Reinforced Concrete Structures: Emerging Research and Opportunities. IGI Global, 2020.

Kayabekir, Aylin Ece, Gebrail Bekdas, and Sinan Melih Nigdeli. Metaheuristic Approaches for Optimum Design of Reinforced Concrete Structures: Emerging Research and Opportunities. IGI Global, 2020.

Kayabekir, Aylin Ece, Sinan Melih Nigdeli, and Gebrail Bekdaş. Metaheuristic Approaches for Optimum Design of Reinforced Concrete Structures: Emerging Research and Opportunities. IGI Global, 2020.