Log in

Relevant bibliographies by topics / Intermeshing / Journal articles

To see the other types of publications on this topic, follow the link: Intermeshing.

Journal articles on the topic 'Intermeshing'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Intermeshing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kim, Pan Soo, and James L. White. "Simulation of Flow in an Intermeshing Internal Mixer and Comparison of Rotor Designs." Rubber Chemistry and Technology 69, no. 4 (1996): 686–95. http://dx.doi.org/10.5254/1.3538395.

Full text

Abstract:

Abstract This paper describes a simulation of flow in various intermeshing rotor internal mixer designs. The rotor designs studied were obtained from the patent literature and presentations of the major intermeshing rotor machinery mixer manufactures. The results of the simulation are compared to those for rotors of commercial separated rotor mixers. We seek to compare intermeshing and separated rotor mixers by contrasting estimated rates of mixing per unit total mixing chamber volume. Intermeshing rotors are generally predicted to perform better. This indicates they will mix more material des

APA, Harvard, Vancouver, ISO, and other styles

2

Ding, Wei, and Xin Yu Wang. "Study on Geometrical Parameters Definition for Section Curve of Fully Intermeshing Twin Screw." Advanced Materials Research 299-300 (July 2011): 904–7. http://dx.doi.org/10.4028/www.scientific.net/amr.299-300.904.

Full text

Abstract:

In accordance with the geometrical parameters deduction process for the fully intermeshing twin screw, analysis and calculation of the section curve are performed. Then the geometrical parameters for section curve are defined based on theories of relative motion and gear meshing principal. Do research on the co-rotating parallel axis fully intermeshing twin screw from intermeshing principle, cross section curves, volume parameters, center distance and so on are deduced. The parameters can be used to provide references to design some twin screw devices.

APA, Harvard, Vancouver, ISO, and other styles

3

Yang, Fu Qin, Guan Ying Song, and Chuan Sheng Wang. "Research on Fill Factor of Internal Mixers." Key Engineering Materials 561 (July 2013): 395–99. http://dx.doi.org/10.4028/www.scientific.net/kem.561.395.

Full text

Abstract:

With the same recipe and technological conditions, experimental research on fill factor about rubber compound of all-steel radial tire was conducted in four types of X(S)M-1.7L mixers: intermeshing rotor mixer, variable intermeshing clearance mixer, shearing rotor mixer and variable shearing clearance mixer. Based on the summary and analysis of experiments, the authors discussed the influence of fill factor on performance of internal mixers and physical and mechanical properties of the rubber compound. And the optimal values of fill factor of different types mixer were determined.

APA, Harvard, Vancouver, ISO, and other styles

4

Sieber, David A., Darl K. Vandevender, and Kevin V. Albuquerque. "Intermeshing breast reconstruction and postmastectomy radiation." Expert Review of Anticancer Therapy 10, no. 8 (2010): 1273–83. http://dx.doi.org/10.1586/era.10.106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

YAMADA, Norifumi. "Recent Intermeshing Rotor in Internal Mixers." NIPPON GOMU KYOKAISHI 81, no. 12 (2008): 516–20. http://dx.doi.org/10.2324/gomu.81.516.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

FUJISAWA, Yohei, Satoshi SUZUKI, Mikio NAKAMURA, Kojiro IIZUKA, and Takashi KAWAMURA. "B22 Modeling for Intermeshing Quadrotor Helicopter." Proceedings of the Symposium on the Motion and Vibration Control 2013.13 (2013): _B22–1_—_B22–8_. http://dx.doi.org/10.1299/jsmemovic.2013.13._b22-1_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kim, Pan Soo, and James L. White. "Flow Visualization of Intermeshing and Separated Counter-Rotating Rotor Internal Mixer." Rubber Chemistry and Technology 67, no. 5 (1994): 880–91. http://dx.doi.org/10.5254/1.3538719.

Full text

Abstract:

Abstract A flow visualization investigation of material motions and compounding in an internal mixer with intermeshing rotors is described. Rotors based on the design of R. T. Cooke of Francis Shaw and Company are used. Compared with separated rotor designs developed by F. H. Banbury, the distinctive feature is the passage of the rubber and compounding ingredients through the calendering gap between the rotors during mixing. The intermeshing rotors were found to rapidly circulate the materials from rotor to rotor around the mixing chamber and to more rapidly incorporate carbon black and oil re

APA, Harvard, Vancouver, ISO, and other styles

8

Bigio, D., W. Baim, and M. Wigginton. "Mixing in Non-intermeshing Twin Screw Extruders." International Polymer Processing 6, no. 2 (1991): 172–76. http://dx.doi.org/10.3139/217.910172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Liu, Shuo, Weijie Chen, Yunxiu Shen, et al. "An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V." Journal of Materials Chemistry A 8, no. 29 (2020): 14555–65. http://dx.doi.org/10.1039/d0ta04275g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, G., X. Z. Zhu, and Chun Yi Sun. "Numerical Simulation of Mixing Performance of Intermeshing Co-Rotating Tri-Screw and Twin-Screw Extruders." Advanced Materials Research 468-471 (February 2012): 2211–14. http://dx.doi.org/10.4028/www.scientific.net/amr.468-471.2211.

Full text

Abstract:

Parallel arranged tri-screw extruder (PATSE) is a new machine of polymer processing and first manufactured in recent years in China. Compared with the traditional twin-screw extruder, PATSE adds a screw, and added an intermeshing region. It is well known that material going though intermeshing region will acquire higher shear rate and stretching rate, which is beneficial to mixing processing. In order to know the mixing performance in cross-section for PATSE, polymer melt flow field simulation and mixing simulation were conducted on PATSE with 2D model and a Carreau flow model to evaluate velo

APA, Harvard, Vancouver, ISO, and other styles

11

Nortey, N. O. "The “New-Generation” Co-flow Intermeshing Internal Mixer." International Polymer Processing 16, no. 2 (2001): 87–99. http://dx.doi.org/10.3139/217.1638.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Zhang, Yuan, Xiaohan Jiang, Huaping Fan, and Xihan Li. "Optimization and Numerical Simulation of Outlet of Twin Screw Extruder." MATEC Web of Conferences 153 (2018): 05004. http://dx.doi.org/10.1051/matecconf/201815305004.

Full text

Abstract:

In view of the unreasonable design of non-intermeshing counter-rotating twin screw extruder die, the problem of productivity reduction was discussed. Firstly, the mathematical model of extruder productivity was established. The extruder die model was improved. Secondly, the force analysis of twin screw extruder physical model was carried out. Meanwhile, A combination of mechanical analysis and numerical simulation was adopted. The velocity field, pressure field and viscosity field were calculated by Mini-Element interpolation method, linear interpolation method and Picard iterative convergence

APA, Harvard, Vancouver, ISO, and other styles

13

Potente, H., J. Ansahl, and B. Klarholz. "Design of Tightly Intermeshing Co-Rotating Twin Screw Extruders." International Polymer Processing 9, no. 1 (1994): 11–25. http://dx.doi.org/10.3139/217.940011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Hong, M. H., and J. L. White. "Fluid Mechanics of Intermeshing Counter-Rotating Twin Screw Extruders." International Polymer Processing 13, no. 4 (1998): 342–46. http://dx.doi.org/10.3139/217.980342.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

R. G. Koegel, R. J. Straub, and M. F. Finner. "Performance Characteristics of an Intermeshing Disk Cutterhead for Forages." Transactions of the ASAE 28, no. 4 (1985): 1052–55. http://dx.doi.org/10.13031/2013.32386.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Todd, David B. "Practical Aspects of Processing in Intermeshing Twin Screw Extruders." Journal of Reinforced Plastics and Composites 17, no. 18 (1998): 1607–16. http://dx.doi.org/10.1177/073168449801701802.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Wilczynski, Krzysztof, and James L. White. "Melting model for intermeshing counter-rotating twin-screw extruders." Polymer Engineering & Science 43, no. 10 (2003): 1715–26. http://dx.doi.org/10.1002/pen.10145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Kim, Sung-Min, and Kwang-Jea Kim. "Effects of Intermeshing Rotor for Dispersion of Silica Agglomerates in SBR/BR Compound." Polymer Korea 36, no. 5 (2012): 637–42. http://dx.doi.org/10.7317/pk.2012.36.5.637.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Wang, Y., J. L. White, and W. Szydlowski. "Flow in a Modular Intermeshing Co-rotating Twin Screw Extruder." International Polymer Processing 4, no. 4 (1989): 262–69. http://dx.doi.org/10.3139/217.890262.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Potente, H., J. Ansahl, and R. Wittemeier. "Throughput characteristics of Tightly Intermeshing Co-rotating Twin Screw Extruders." International Polymer Processing 5, no. 3 (1990): 208–16. http://dx.doi.org/10.3139/217.900208.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Curry, J., A. Kiani, and A. Dreiblatt. "Feed Variance Limitations for Co-rotating Intermeshing Twin Screw Extruders." International Polymer Processing 6, no. 2 (1991): 148–55. http://dx.doi.org/10.3139/217.910148.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Wang, N. H., T. Sakai, and N. Hashimoto. "Pumping Characteristics of an Intermeshing Co-rotating Twin Screw Extruder." International Polymer Processing 13, no. 1 (1998): 27–32. http://dx.doi.org/10.3139/217.980027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

MOTODA, Takehiko, and Makoto ISHIHARA. "Study on the Resin Behavior in Intermeshing Twin Screw Extruder." Seikei-Kakou 8, no. 12 (1996): 816–27. http://dx.doi.org/10.4325/seikeikakou.8.816.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Yao, Chih-Hsiang, Ica Manas-Zloczower, Roberto Regalia, and Luigi Pomini. "Distributive Mixing in Variable Intermeshing Clearance Mixers: Simulation and Experiments." Rubber Chemistry and Technology 71, no. 4 (1998): 690–707. http://dx.doi.org/10.5254/1.3538498.

Full text

Abstract:

Abstract Distributive mixing performance in Variable Intermeshing Clearance (VIC) mixers was studied numerically and verified experimentally. A fluid dynamics analysis package (FIDAP), based on the finite element method, was employed to simulate the flow patterns in the original lab size mixer (VIC1) and a new design with an enlarged mixing chamber (VIC2). Distributive mixing was studied numerically by means of tracking the evolution of particles originally gathered as clusters. The results of numerical simulations were checked against experimental data to verify the validity of the model. Bot

APA, Harvard, Vancouver, ISO, and other styles

25

Li, Tao, and Ica Manas-Zloczower. "Flow field analysis of an intermeshing counterrotating twin screw extruder." Polymer Engineering and Science 34, no. 7 (1994): 551–58. http://dx.doi.org/10.1002/pen.760340703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Weichman, Peter B., and Anoop Prasad. "Zippering and Intermeshing: Novel Phase Diagrams for Interfaces and Films." Physical Review Letters 76, no. 13 (1996): 2322–25. http://dx.doi.org/10.1103/physrevlett.76.2322.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

SATOU, Kouki, Toshihiko SHIRAISHI, and Shin MORISHITA. "504 Effects of Gear Intermeshing Condition on the Gear Noise." Proceedings of the Dynamics & Design Conference 2012 (2012): _504–1_—_504–7_. http://dx.doi.org/10.1299/jsmedmc.2012._504-1_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Wei, Jing, Dongming Zhou, Aiqiang Zhang, Yuliang Yang, and Dabing Chen. "Profiles evolutionary design and evaluation of mixing performance of screw elements for intermeshing counter-rotating twin-screw kneader." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 230, no. 17 (2016): 3076–91. http://dx.doi.org/10.1177/0954406215606946.

Full text

Abstract:

The profile designs of screw elements are very crucial to improving the mixing performance for the intermeshing counter-rotating twin-screw kneader. In order to find the inherent law among different profiles of screw elements and to derive a mathematical model which evolves different types of end cross-section profiles of screw elements, a universal mathematical model of end cross-section profiles of screw elements is presented in this work. Different types of profiles of screw elements, including those traditionally used can be obtained by evolutionary design method after changing the tooth n

APA, Harvard, Vancouver, ISO, and other styles

29

Wang, Chuan Sheng, Wei Shuai Lv, and Hui Guang Bian. "Finite-Element Comparative Analysis of Two Kinds of Meshing Rotor." Key Engineering Materials 501 (January 2012): 16–21. http://dx.doi.org/10.4028/www.scientific.net/kem.501.16.

Full text

Abstract:

This paper mainly introduces two kinds of internal mixer rotor. The professional visco-elastic fluid software--Polyflow is used to obtain dynamic simulation analysis process of the two different types of meshing rotors. The transient flow field model’s simulation results of the two intermeshing rotors which have rotated for 180 seconds are used to analyze the performance of the two rotors. And these analyses can be theoretical references for optimal design of the rotor.

APA, Harvard, Vancouver, ISO, and other styles

30

Fukuzawa, Yohei, Takahide Takeuchi, and Hideki Tomiyama. "Polymer Plasticization Process in an Intermeshing Co-rotating Twin Screw Extruder." Seikei-Kakou 26, no. 10 (2014): 468–72. http://dx.doi.org/10.4325/seikeikakou.26.468.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Mercier, M., S. Hoppe, G. H. Hu, F. Pla, and T. Vivier. "Local Residence Time Distributions in an Intermeshing Corotating Twin Screw Extruder." Chemie Ingenieur Technik 73, no. 6 (2001): 659. http://dx.doi.org/10.1002/1522-2640(200106)73:6<659::aid-cite6592222>3.0.co;2-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Chen, L., G. H. Hu, and J. T. Lindt. "Residence time distribution in non-intermeshing counter-rotating twin-screw extruders." Polymer Engineering and Science 35, no. 7 (1995): 598–603. http://dx.doi.org/10.1002/pen.760350706.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Böhme, G., and O. Wünsch. "Analysis of shear-thinning fluid flow in intermeshing twin-screw extruders." Archive of Applied Mechanics (Ingenieur Archiv) 67, no. 3 (1997): 167–78. http://dx.doi.org/10.1007/s004190050109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Potluri, Ramesh, David Todd, and Costas Gogos. "Mixing immiscible blends in an intermeshing counter-rotating twin screw extruder." Advances in Polymer Technology 25, no. 2 (2006): 81–89. http://dx.doi.org/10.1002/adv.20065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

White, James L. "Development of Internal-Mixer Technology for the Rubber Industry." Rubber Chemistry and Technology 65, no. 3 (1992): 527–79. http://dx.doi.org/10.5254/1.3538629.

Full text

Abstract:

Abstract The early rubber industry was largely based on mixing with two-roll mills. The coming of the pneumatic-tire industry associated with the rise in popularity of the automobile brought increasing production and large quantities of fine particles and poisonous vulcanization accelerators. This made necessary the introduction of internal mixers into the rubber industry by the second decade of the 20th century. This paper treats the development of internal mixer technology from its origins in the 19th century to the late 1980's, largely through critically following the patent literature. The

APA, Harvard, Vancouver, ISO, and other styles

36

Wu, Yu Ren, Van The Tran, and Po Hua Hsu. "Dynamic Analysis for Rotors of a Twin-Screw Compressor with Gas-Induced Cyclic Loads." Applied Mechanics and Materials 789-790 (September 2015): 220–25. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.220.

Full text

Abstract:

The effects of dynamic forces and elastic contacts in a pair of intermeshing rotors with the gas-induced cyclic loads based on the multibody dynamics simulation have not investigated yet. The comparison of numerical spectra of time and frequency domains of acceleration with the experimental noise spectrum of an oil-injected twin-screw compressor has not also considered. Therefore, this study proposes a new strategy, which combines the fluctuating torques and forces induced by cyclic gas pressure on the screw rotors to numerically predict vibration response in an oil-injected twin-screw compres

APA, Harvard, Vancouver, ISO, and other styles

37

Murphy, Michael Warren, and Caitlin Schroering. "Refiguring the Plantationocene." Journal of World-Systems Research 26, no. 2 (2020): 400–415. http://dx.doi.org/10.5195/jwsr.2020.983.

Full text

Abstract:

While sympathetic to debates about the utility, accuracy, and significance of the “Anthropocene,” in this brief essay, we are most interested in implicating racialization, colonization, and their ongoing place in the capitalist world-economy and global ecological change. To this end, we point to the potential of thinking with the “Plantationocene,” considering that to invoke the plantation is to simultaneously contend with the intermeshing organization of the colonialist/imperialist, racialist, and capitalist dimensions of the world-system as directly related to global environmental transforma

APA, Harvard, Vancouver, ISO, and other styles

38

Wilczynski, K., and J. L. White. "Experimental Study of Melting in an Intermeshing Counter-Rotating Twin Screw Extruder." International Polymer Processing 16, no. 3 (2001): 257–62. http://dx.doi.org/10.3139/217.1645.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Thompson, M., J. P. Puaux, A. N. Hrymak, and A. E. Hamielec. "Modeling the Residence Time Distribution of a Non-Intermeshing Twin Screw Extruder." International Polymer Processing 10, no. 2 (1995): 111–19. http://dx.doi.org/10.3139/217.950111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Yao, C. H., and I. Manas-Zloczower. "Influence of Design on Mixing Efficiency in a Variable Intermeshing Clearance Mixer." International Polymer Processing 12, no. 2 (1997): 92–103. http://dx.doi.org/10.3139/217.970092.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

ZHENG, Hong, Wei YU, Hongbin ZHANG, Chixing ZHOU, Lianfang FENG, and Zhongbin XU. "COMPUTER SIMULATION OF EXTRUSION PROCESS OF INTERMESHING CO-ROTATING TWIN SCREW EXTRUDERS." Acta Polymerica Sinica 006, no. 5 (2010): 676–81. http://dx.doi.org/10.3724/sp.j.1105.2006.00676.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Jiang, Qibo, Jinhai Yang, and James L. White. "Simulation of screw pumping characteristics for intermeshing counter-rotating twin screw extruders." Polymer Engineering & Science 51, no. 1 (2010): 37–42. http://dx.doi.org/10.1002/pen.21789.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Nguyen, K. T., and J. T. Lindt. "Finite element modeling of a counter-rotating, non-intermeshing twin screw extruder." Polymer Engineering and Science 29, no. 11 (1989): 709–14. http://dx.doi.org/10.1002/pen.760291103.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Zhu, X. Z., Y. J. Xie, and H. Q. Yuan. "Numerical Simulation of Flow Characteristics of Co-Rotating Intermeshing Four-Screw Extruder." Journal of Reinforced Plastics and Composites 27, no. 3 (2007): 321–34. http://dx.doi.org/10.1177/0731684407084115.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Szydlowski, Witold, and James L. White. "An improved theory of metering in an intermeshing corotating twin-screw extruder." Advances in Polymer Technology 7, no. 2 (1987): 177–83. http://dx.doi.org/10.1002/adv.1987.060070206.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Mudalamane, Rajath, David I. Bigio, David C. Tomayko, and Marcel Meissel. "Behavior of fully filled regions in a non-intermeshing twin-screw extruder." Polymer Engineering & Science 43, no. 8 (2003): 1466–76. http://dx.doi.org/10.1002/pen.10124.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Bigio, D., and K. Wang. "Scale-up rules for mixing in a non-intermeshing twin-screw extruder." Polymer Engineering & Science 36, no. 23 (1996): 2832–39. http://dx.doi.org/10.1002/pen.10684.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Yang, Fu Qin, Chuan Sheng Wang, Guan Ying Song, and Jun Xu. "Experiment Research on Maximum Power of the VIC Mixer." Advanced Materials Research 87-88 (December 2009): 561–66. http://dx.doi.org/10.4028/www.scientific.net/amr.87-88.561.

Full text

Abstract:

The relationship of maximum power relative to rotor clearance, filling factor, rotor speed, ram piston pressure and cooling water temperature was studied for the VIC(Variable Intermeshing Clearance) mixer. The study result by single-factor experiment method showed that in certain extent, the larger the value of rotor clearance, filling factor, rotor speed, ram piston pressure, the larger the value of maximum power would be; the smaller the value of cooling water temperature, the larger the value of maximum power would be. And the study result by quadratic orthogonal regression combinational de

APA, Harvard, Vancouver, ISO, and other styles

49

Hong, M. H., Q. Jiang, and J. L. White. "Experimental Studies on Screw Characteristics in Closely Intermeshing Counter-rotating Twin Screw Extruder." International Polymer Processing 23, no. 1 (2008): 88–92. http://dx.doi.org/10.3139/217.2049.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Min, K., M. H. Kim, and J. L. White. "Flow Visualization and Performance of a Non-Intermeshing Counter-Rotating Twin Screw Extruder." International Polymer Processing 3, no. 3 (1988): 165–69. http://dx.doi.org/10.3139/217.880165.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!