To see the other types of publications on this topic, follow the link: Isotropic rod.

Journal articles on the topic 'Isotropic rod'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Isotropic rod.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Koenderink, G. H., A. P. Philipse, and S. G. J. M. Kluijtmans. "Sphere dynamics in isotropic colloidal rod fluids." Journal of Physics: Condensed Matter 12, no. 8A (2000): A339—A343. http://dx.doi.org/10.1088/0953-8984/12/8a/345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shundyak, Kostya, and René van Roij. "Isotropic-nematic interfaces of hard-rod fluids." Journal of Physics: Condensed Matter 13, no. 21 (2001): 4789–800. http://dx.doi.org/10.1088/0953-8984/13/21/310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jungblut, S., R. Tuinier, K. Binder, and T. Schilling. "Depletion induced isotropic-isotropic phase separation in suspensions of rod-like colloids." Journal of Chemical Physics 127, no. 24 (2007): 244909. http://dx.doi.org/10.1063/1.2815805.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pujara, Nimish, Greg A. Voth, and Evan A. Variano. "Scale-dependent alignment, tumbling and stretching of slender rods in isotropic turbulence." Journal of Fluid Mechanics 860 (December 7, 2018): 465–86. http://dx.doi.org/10.1017/jfm.2018.866.

Full text
Abstract:
We examine the dynamics of slender, rigid rods in direct numerical simulation of isotropic turbulence. The focus is on the statistics of three quantities and how they vary as rod length increases from the dissipation range to the inertial range. These quantities are (i) the steady-state rod alignment with respect to the perceived velocity gradients in the surrounding flow, (ii) the rate of rod reorientation (tumbling) and (iii) the rate at which the rod end points move apart (stretching). Under the approximations of slender-body theory, the rod inertia is neglected and rods are modelled as pas
APA, Harvard, Vancouver, ISO, and other styles
5

Podgornik, Rudolf. "Theory of Inhomogeneous Rod-like Coulomb Fluids." Symmetry 13, no. 2 (2021): 274. http://dx.doi.org/10.3390/sym13020274.

Full text
Abstract:
A field theoretic representation of the classical partition function is derived for a system composed of a mixture of anisotropic and isotropic mobile charges that interact via long range Coulomb and short range nematic interactions. The field theory is then solved on a saddle-point approximation level, leading to a coupled system of Poisson–Boltzmann and Maier–Saupe equations. Explicit solutions are finally obtained for a rod-like counterion-only system in proximity to a charged planar wall. The nematic order parameter profile, the counterion density profile and the electrostatic potential pr
APA, Harvard, Vancouver, ISO, and other styles
6

Mironov, B. G., та Yu B. Mironov. "ОБ ОПРЕДЕЛЕНИИ КОМПОНЕНТ ДЕФОРМАЦИИ В СЛУЧАЕ КРУЧЕНИЯ ИЗОТРОПНЫХ СТЕРЖНЕЙ, НАХОДЯЩИХСЯ ПОД ДЕЙСТВИЕМ ВНЕШНЕГО ДАВЛЕНИЯ". Вестник Чувашского государственного педагогического университета им. И.Я. Яковлева. Серия: Механика предельного состояния, № 1(55) (6 червня 2023): 13–17. http://dx.doi.org/10.37972/chgpu.2023.55.1.002.

Full text
Abstract:
In this paper, we study the deformed state of an isotropic rod made of an ideal rigidplastic material, assuming that the rod is twisted around its axis. The torsion of isotropic and anisotropic ideally plastic rods was considered in [1–5]. In [6–9], the torsion of rods under the action of linear pressure. В настоящей работе исследуется деформированное состояние изотропного стержня из идеального жесткопластического материала, в предположении, что стержень закручивается вокруг своей оси. Кручение изотропных и анизотропных идеально пластических стержней рассмотрено в работах [1–5]. В работах [6–9
APA, Harvard, Vancouver, ISO, and other styles
7

Dressel, Christian, Wolfgang Weissflog, and Carsten Tschierske. "Spontaneous mirror symmetry breaking in a re-entrant isotropic liquid." Chemical Communications 51, no. 87 (2015): 15850–53. http://dx.doi.org/10.1039/c5cc06843f.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Izzo, Dora. "Viscosity of a solution of polyelectrolytes near the rod limit." Soft Matter 18, no. 8 (2022): 1696–705. http://dx.doi.org/10.1039/d1sm01631h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wensink, H. H., G. J. Vroege, and H. N. W. Lekkerkerker. "Isotropic-nematic phase separation in asymmetrical rod-plate mixtures." Journal of Chemical Physics 115, no. 15 (2001): 7319–29. http://dx.doi.org/10.1063/1.1403686.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kardomateas, G. A. "Three-Dimensional Elasticity Solution for the Buckling of Transversely Isotropic Rods: The Euler Load Revisited." Journal of Applied Mechanics 62, no. 2 (1995): 346–55. http://dx.doi.org/10.1115/1.2895937.

Full text
Abstract:
The bifurcation of equilibrium of a compressed transversely isotropic bar is investigated by using a three-dimensional elasticity formulation. In this manner, an assessment of the thickness effects can be accurately performed. For isotropic rods of circular cross-section, the bifurcation value of the compressive force turns out to coincide with the Euler critical load for values of the length-over-radius ratio approximately greater than 15. The elasticity approach predicts always a lower (than the Euler value) critical load for isotropic bodies; the two examples of transversely isotropic bodie
APA, Harvard, Vancouver, ISO, and other styles
11

Kleschev, A. A. "Anisotropic solid cylindrical waveguides." Transactions of the Krylov State Research Centre 3, no. 401 (2022): 139–44. http://dx.doi.org/10.24937/2542-2324-2022-3-401-139-144.

Full text
Abstract:
Object and purpose of research. The article studies the behavior of anisotropic elastic bodies of cylindrical shape (orthotropic shell and transversely isotropic rod). The intention is to find the phase velocities of elastic waves in these bodies using thin shell approximations and a rigorous approach based on the dynamic theory of elasticity using "Debye type" potentials. In previous studies of anisotropic structures, anisotropic media or anisotropic half-spaces were used. Materials and methods. Both an approximate thin shell method and a rigorous approach based on the dynamic theory of elast
APA, Harvard, Vancouver, ISO, and other styles
12

Alaasar, Mohamed, Silvio Poppe, Qingshu Dong, Feng Liu, and Carsten Tschierske. "Mirror symmetry breaking in cubic phases and isotropic liquids driven by hydrogen bonding." Chemical Communications 52, no. 96 (2016): 13869–72. http://dx.doi.org/10.1039/c6cc08226b.

Full text
Abstract:
Achiral hydrogen bonded rod-like complexes with four nonequally distributed terminal alkyl chains form a chirality synchronized isotropic liquid conglomerate as well as a conglomerate type chiral cubic phase.
APA, Harvard, Vancouver, ISO, and other styles
13

Bertails-Descoubes, Florence, Alexandre Derouet-Jourdan, Victor Romero, and Arnaud Lazarus. "Inverse design of an isotropic suspended Kirchhoff rod: theoretical and numerical results on the uniqueness of the natural shape." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 474, no. 2212 (2018): 20170837. http://dx.doi.org/10.1098/rspa.2017.0837.

Full text
Abstract:
Solving the equations for Kirchhoff elastic rods has been widely explored for decades in mathematics, physics and computer science, with significant applications in the modelling of thin flexible structures such as DNA, hair or climbing plants. As demonstrated in previous experimental and theoretical studies, the natural curvature plays an important role in the equilibrium shape of a Kirchhoff rod, even in the simple case where the rod is isotropic and suspended under gravity. In this paper, we investigate the reverse problem: can we characterize the natural curvature of a suspended isotropic
APA, Harvard, Vancouver, ISO, and other styles
14

Würflinger, A., M. Sandmann, and W. Weissflog. "PVT Measurements on 3-Cyanobenzyl 2,5-bis(4-n-octyloxybenzoyl- oxy)benzoate up to 250 MPa and 423 K." Zeitschrift für Naturforschung A 55, no. 9-10 (2000): 823–27. http://dx.doi.org/10.1515/zna-2000-9-1012.

Full text
Abstract:
Abstract P, Vm , T data have been measured for the nematic and isotropic phases of 3-cyanobenzyl 2,5-bis (4-n-octyloxybenzoyloxy)benzoate between 273 and 423 K and up to 250 MPa. The volume changes accompanying the crystal -nematic and nematic -isotropic transitions have been determined. The cor-responding enthalpy changes have been calculated using the Clausius-Clapeyron equation. The p, V m , T data enable also to estimate the volume entropy for the nematic-isotropic transition. It is found that the configurational part of the transition entropy amounts to 80%, this portion being distinctly
APA, Harvard, Vancouver, ISO, and other styles
15

Vorobyeva, Alexandra, Qifeng Wang, Dieter Klatt, Kenneth Shull, Eric J. Perreault, and Thomas Royston. "Rayleigh-Lamb wave propagation in a prestressed transversely isotropic viscoelastic waveguide: Inverse modeling challenges." Journal of the Acoustical Society of America 155, no. 3_Supplement (2024): A291. http://dx.doi.org/10.1121/10.0027544.

Full text
Abstract:
The functional role and structure of skeletal muscle results in anisotropy in both material properties and imposed stresses, as well as waveguide effects. Dynamic elastography reconstruction methods for estimating muscle tissue viscoelastic properties that are rooted in assumptions of isotropy and bulk wave motion may produce inaccurate estimates. The superposition of axially-aligned orthotropy (transverse isotropy) in material properties and axially-aligned prestress conditions due to passive stretch or muscle activation makes it difficult to independently discern how much of the apparent ani
APA, Harvard, Vancouver, ISO, and other styles
16

Zhong, Zheng, X. B. Yu, Qing Ping Sun, T. X. Yu, and Han Chen Huang. "Modeling of Phase Transformation in a Transversely Isotropic SMA Rod." Key Engineering Materials 233-236 (January 2003): 649–54. http://dx.doi.org/10.4028/www.scientific.net/kem.233-236.649.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Soukup, J., J. Skočilas, B. Skočilasová, and L. Ryhlíková. "Motion Equations Isotropic and Orthotropic Plate Impacted by Elastic Rod." Journal of Applied Nonlinear Dynamics 3, no. 4 (2014): 393–401. http://dx.doi.org/10.5890/jand.2014.12.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Zhbanov, Yu K., and A. A. Privalov. "Rod Construction of an Isotropic Elastic Suspension of Inertial Mass." Mechanics of Solids 53, no. 5 (2018): 492–500. http://dx.doi.org/10.3103/s0025654418080034.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Lusher, C. P., and W. N. Hardy. "Axisymmetric Free Vibrations of a Transversely Isotropic Finite Cylindrical Rod." Journal of Applied Mechanics 55, no. 4 (1988): 855–62. http://dx.doi.org/10.1115/1.3173733.

Full text
Abstract:
The frequencies of free vibration and mode shapes are calculated for axisymmetric modes of an elastic cylinder of finite length having hexagonal symmetry with the crystallographic c-axis coincident with the axis of the cylinder (a transversely isotropic finite cylindrical rod). A series solution is used which satisfies term-by-term the differential equations of linear elasticity and the boundary conditions on the shear stress; the boundary conditions on the normal stresses are satisfied by using an orthogonalization procedure. As an example, the method is applied to sapphire, with one of the s
APA, Harvard, Vancouver, ISO, and other styles
20

Charalambopoulos, A., D. I. Fotiadis, and C. V. Massalas. "Free vibrations of a double layered elastic isotropic cylindrical rod." International Journal of Engineering Science 36, no. 7-8 (1998): 711–31. http://dx.doi.org/10.1016/s0020-7225(97)00124-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Chang, Jian Mei, and Huai Ping Feng. "Wave Propagation in a Magnetoelectroelastic Rod." Applied Mechanics and Materials 79 (July 2011): 237–41. http://dx.doi.org/10.4028/www.scientific.net/amm.79.237.

Full text
Abstract:
In this paper the propagation of axially symmetric compression wave in an infinite transversely isotropic magnetoelectroelastic cylinder is presented. Following Pan(2002), the general boundary conditions on the surface of the magnetoelectroelastic cylinder are written by a simple vector equation that is similar to the purely elastic counterpart. By assuming the possible form of the solution, the generalized Pochhammer frequency equations are presented and the corresponding phase velocity curves in some range are given. Numerical examples are also presented to show phase velocity curves under t
APA, Harvard, Vancouver, ISO, and other styles
22

Nguyen, Thi Phuong Thuy, Thi Van Anh Nguyen, and Van Thanh Ngo. "Phase transitions of smectic-isotropic phase in liquid crystals." Ministry of Science and Technology, Vietnam 66, no. 1 (2024): 1–7. http://dx.doi.org/10.31276/vjst.66(1).01-07.

Full text
Abstract:
Smectic phases formed by rod-like molecules with long axes that are parallel and also arranged in planes. The smectic-isotropic phase transition is a phase change from the liquid crystal to the liquid phase. In this work, we use a mobile 6-state Potts model to study the nature of the smectic-isotropic phase transition. Microscopic interactions between neighbouring molecules in this model are supplemented with the Lennard-Jones potential. This study applies Monte Carlo simulation with the Wang-Landau algorithm to determine the characteristics of smectic-isotropic phase transitions. It is shown
APA, Harvard, Vancouver, ISO, and other styles
23

Dai, Guang Ze, Bin Deng, Guozhi Wang, and Qing Qing Ni. "Analysis to Nonlinear Creep Behavior of Viscoelastic Materials with Structure Varieties by Means of Irreversible Thermodynamics (Ⅱ)." Key Engineering Materials 297-300 (November 2005): 390–96. http://dx.doi.org/10.4028/www.scientific.net/kem.297-300.390.

Full text
Abstract:
The so-called structure parameters are firstly introduced to indicate their influence on nonlinear viscoelastic behavior and the corresponding nonlinear evolution equation is then derived based on the linear one proposed by Biot by means of thermodynamics of irreversible process. As a worked example, the above nonlinear evolution equation is applied to a viscelastic rod of the ideal viscoelastic solid to predict its uniaxial creep behavior. Under the strain-induced anisotropic effect due to the configurationally structure changes, the originally isotropic rod gradually becomes transversely iso
APA, Harvard, Vancouver, ISO, and other styles
24

Salehabadi, Melika, Lara Nammari, Aime Luna, Joseph Crutison, Dieter Klatt, and Thomas J. Royston. "Quantifying uniaxial prestress and waveguide effects on dynamic elastography estimates for a cylindrical rod." Journal of the Acoustical Society of America 154, no. 6 (2023): 3580–94. http://dx.doi.org/10.1121/10.0022581.

Full text
Abstract:
Dynamic elastography attempts to reconstruct quantitative maps of the viscoelastic properties of materials by noninvasively measuring mechanical wave motion in them. The target motion is typically transversely-polarized relative to the wave propagation direction, such as bulk shear wave motion. In addition to neglecting waveguide effects caused by small lengths in one dimension or more, many reconstruction strategies also ignore nonzero, non-isotropic static preloads. Significant anisotropic prestress is inherent to the functional role of some biological materials of interest, which also are s
APA, Harvard, Vancouver, ISO, and other styles
25

Rubin, M. B. "Free Vibration of a Rectangular Parallelepiped Using the Theory of a Cosserat Point." Journal of Applied Mechanics 53, no. 1 (1986): 45–50. http://dx.doi.org/10.1115/1.3171736.

Full text
Abstract:
Free vibration of a rectangular parallelepiped composed of a homogeneous linear elastic isotropic material is studied. The parallelepiped is modeled as an isotropic Cosserat point and simple formulas are developed to predict the lowest frequencies of vibration. Within the context of the theory, extensional and shear vibrations are uncoupled. The lowest extensional frequency predicted by the Cosserat theory is compared with available exact solutions and with predictions of thin rod theory. Finally, by introducing a simple modification of the director inertia coefficient it is shown that the Cos
APA, Harvard, Vancouver, ISO, and other styles
26

Hashemi, Mohammad, and Yaroslav Zhuk. "Thermal instability and failure prediction of structural elements with transversely isotropic nanocomposite material." Physico-mathematical modelling and informational technologies, no. 25 (May 25, 2017): 151–56. http://dx.doi.org/10.15407/fmmit2017.25.151.

Full text
Abstract:
This paper is dedicated to the failure prediction for nanocomposite structural elements due to thermal instability under cyclic loading. It is based on the model of monoharmonic approximation and concept of complex moduli. The temperature and amplitude dependent complex moduli is used for the investigation of the dissipative heating influence on mechanical stability of polymeric nanocomposite rod subjected to both static and monoharmonic loading. Also, the influence of amplitude of the excitation loading and the volume fraction of nanofibers on thermal stability of the polymeric nanocomposite
APA, Harvard, Vancouver, ISO, and other styles
27

Zylev, Vladimir B., and Pavel O. Platnov. "Consideration of damping in a continuous medium using the rod approximation by A.R. Rzhanitsyn." Structural Mechanics of Engineering Constructions and Buildings 19, no. 2 (2023): 149–61. http://dx.doi.org/10.22363/1815-5235-2023-19-2-149-161.

Full text
Abstract:
The work is focused on creating a method for accounting of internal friction, which provides frequency independence, considers the dependence of internal friction on the level of the stress state, and is suitable for physically nonlinear tasks at large and small displacements. The authors consider an approximated method of accounting the damping in plates using the rod approximation according to A.R. Rzhanitsyn. An analysis of the discrete Rzhanitsyn medium with a square cell is given in terms of isotropy of its damping properties. The exact fulfillment of the isotropic damping properties is s
APA, Harvard, Vancouver, ISO, and other styles
28

Gold, Douglas, Clement Onyenemezu, and Wilmer G. Miller. "Diffusion of Polystyrene Latex Spheres through Isotropic Rigid Rod Polymer Solutions." Macromolecules 29, no. 17 (1996): 5710–16. http://dx.doi.org/10.1021/ma951823p.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Viitanen, Ari J., and Ismo V. Lindell. "Perturbation theory for a corrugated waveguide with a bi-isotropic ROD." Microwave and Optical Technology Letters 5, no. 14 (1992): 729–32. http://dx.doi.org/10.1002/mop.4650051408.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Osipov, Mikhail A., Maxim V. Gorkunov, and Alexander A. Antonov. "Liquid Crystal Ordering in the Hexagonal Phase of Rod-Coil Diblock Copolymers." Polymers 12, no. 6 (2020): 1262. http://dx.doi.org/10.3390/polym12061262.

Full text
Abstract:
Density functional theory of rod-coil diblock copolymers, developed recently by the authors, has been generalised and used to study the liquid crystal ordering and microphase separation effects in the hexagonal, lamellar and nematic phases. The translational order parameters of rod and coil monomers and the orientational order parameters of rod-like fragments of the copolymer chains have been determined numerically by direct minimization of the free energy. The phase diagram has been derived containing the isotropic, the lamellar and the hexagonal phases which is consistent with typical experi
APA, Harvard, Vancouver, ISO, and other styles
31

Sodagar, Sina, Farhang Honarvar, and Anthony N. Sinclair. "Scattering of an obliquely incident plane wave from an immersed transversely isotropic rod covered by an isotropic cladding." Journal of the Acoustical Society of America 119, no. 5 (2006): 3418. http://dx.doi.org/10.1121/1.4786831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Rattanawangcharoen, N., A. H. Shah, and S. K. Datta. "Reflection of Waves at the Free Edge of a Laminated Circular Cylinder." Journal of Applied Mechanics 61, no. 2 (1994): 323–29. http://dx.doi.org/10.1115/1.2901448.

Full text
Abstract:
A wave function expansion method is employed to solve the reflection problem of time-harmonic elastic waves incident upon the free edge of a semi-infinite laminated circular cylinder. Wave functions are obtained using a propagator matrix approach for laminated isotropic cylinders and by a Rayleigh-Ritz type approximation for laminated composite cylinders. The least-square technique as well as the variational method are employed to evaluate the complex amplitudes and the energy flux associated with the reflected waves. To validate the solutions and present algorithm, results are compared with a
APA, Harvard, Vancouver, ISO, and other styles
33

Drozd-Rzoska, Aleksandra. "‘Quasi-Tricritical’ and Glassy Dielectric Properties of a Nematic Liquid Crystalline Material." Crystals 10, no. 4 (2020): 297. http://dx.doi.org/10.3390/cryst10040297.

Full text
Abstract:
Results of dielectric studies in the nematic and isotropic liquid phases of pentylcyanobiphenyl (5CB), a model rod-like liquid crystalline material, are shown. They are based on the discussion of the evolution of dielectric constant ( ε ), its changes under the strong electric field (nonlinear dielectric effect, NDE), and finally, the primary relaxation time. It is shown that changes in ε T and NDE are entirely dominated by the impact of pretransitional fluctuations (pre-nematic and pre-isotropic, respectively) which are associated with the weakly discontinuous character of the isotropic–nemat
APA, Harvard, Vancouver, ISO, and other styles
34

Wang, Muzhou, Ksenia Timachova, and Bradley D. Olsen. "Self-Diffusion and Constraint Release in Isotropic Entangled Rod–Coil Block Copolymers." Macromolecules 48, no. 9 (2015): 3121–29. http://dx.doi.org/10.1021/ma501954k.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Jiang, Tao, and Jianzhong Wu. "Isotropic-nematic phase transition in athermal solutions of rod-coil diblock copolymers." Journal of Chemical Physics 127, no. 3 (2007): 034902. http://dx.doi.org/10.1063/1.2751497.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Nagy, Peter B. "Longitudinal guided wave propagation in a transversely isotropic rod immersed in fluid." Journal of the Acoustical Society of America 98, no. 1 (1995): 454–57. http://dx.doi.org/10.1121/1.413702.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Zarubin, V. S., and E. S. Sergeeva. "Transversely Isotropic Rod for Modeling Elastic Characteristics of Single-Walled Carbon Nanotube." Mathematics and Mathematical Modeling, no. 1 (May 20, 2019): 15–26. http://dx.doi.org/10.24108/mathm.0119.0000182.

Full text
Abstract:
Single-walled carbon nanotubes (SWCNT) are a seamless cylindrical structure formed by folding a single-walled graphene sheet. Nanotubes are of great interest due to their unique thermo-mechanical characteristics. Such objects can be applied in the energy, rocket and aerospace engineering as a filler of advanced structural composite materials.One of the most important SWCNT characteristics is a complex of its elastic properties. The most reliable way to determine the elastic characteristics of a nanotube is to conduct an experiment. However, due to high cost and lengthy time of the experiment c
APA, Harvard, Vancouver, ISO, and other styles
38

Ferreiro-Córdova, Claudia, C. Patrick Royall, and Jeroen S. van Duijneveldt. "Anisotropic viscoelastic phase separation in polydisperse hard rods leads to nonsticky gelation." Proceedings of the National Academy of Sciences 117, no. 7 (2020): 3415–20. http://dx.doi.org/10.1073/pnas.1909357117.

Full text
Abstract:
Spinodal demixing into two phases having very different viscosities leads to viscoelastic networks—i.e., gels—usually as a result of attractive particle interactions. Here, however, we demonstrate demixing in a colloidal system of polydisperse, rod-like clay particles that is driven by particle repulsions instead. One of the phases is a nematic liquid crystal with a highly anisotropic viscosity, allowing flow along the director, but suppressing it in other directions. This phase coexists with a dilute isotropic phase. Real-space analysis and molecular-dynamics simulations both reveal a long-li
APA, Harvard, Vancouver, ISO, and other styles
39

Yao, Wen Wei. "Curvature Elastic Energy Model for Carbon Nanotubes." Advanced Materials Research 906 (April 2014): 185–89. http://dx.doi.org/10.4028/www.scientific.net/amr.906.185.

Full text
Abstract:
Since carbon nanotubes (CNTs) were discovered, due to their unique and novel physical and chemical characteristics, many studies focus on them. In this article, a two-dimensional (2D) curvature elastic energy model for isotropic tube is presented, and reduced to a one-dimensional (1D) continuous model which is in accordance with Kirchhoff elastic rod theory. The problems remaining to be solved are discussed.
APA, Harvard, Vancouver, ISO, and other styles
40

LAVOIE, P., L. DJENIDI, and R. A. ANTONIA. "Effects of initial conditions in decaying turbulence generated by passive grids." Journal of Fluid Mechanics 585 (August 7, 2007): 395–420. http://dx.doi.org/10.1017/s0022112007006763.

Full text
Abstract:
The effects of initial conditions on grid turbulence are investigated for low to moderate Reynolds numbers. Four grid geometries are used to yield variations in initial conditions and a secondary contraction is introduced to improve the isotropy of the turbulence. The hot-wire measurements, believed to be the most detailed to date for this flow, indicate that initial conditions have a persistent impact on the large-scale organization of the flow over the length of the tunnel. The power-law coefficients, determined via an improved method, also depend on the initial conditions. For example, the
APA, Harvard, Vancouver, ISO, and other styles
41

Demirović, Besim, Rašid Hadžović, and Nedim Osmić. "Numerical modelling of the bearing capacity of a beam cross-section." IOP Conference Series: Materials Science and Engineering 1208, no. 1 (2021): 012043. http://dx.doi.org/10.1088/1757-899x/1208/1/012043.

Full text
Abstract:
Abstract The paper presents a procedure for numerical modelling of the rod cross-section bearing capacity. Equilibrium between cross sectional forces and cross-sectional stresses is determined by iterative procedures. According to the described procedure, the load-bearing capacity of the cross-section is determined according to the isotropic linear and nonlinear behavior of the material, for homogeneous and inhomogeneous cross-sections. The nonlinear behavior of the material reduces the stiffness of the cross section of the rod EA and EI, with a significant increase in the deformation values ε
APA, Harvard, Vancouver, ISO, and other styles
42

Rushchitsky, J. "To modeling the auxetic materials: some fundamental aspects." Mathematical Modeling and Computing 1, no. 1 (2014): 97–108. http://dx.doi.org/10.23939/mmc2014.01.097.

Full text
Abstract:
The auxetic materials are considered from the point of view of correspondence to the classical theory of elasticity. It is shown that some classical postulates relative to the elastic constants should be refined. Three cases of description of auxetic materials — by the model of linear elastic isotropic body, by the model of linear elastic transversally isotropic body, by the nonlinear elastic isotropic body (Murnaghan potential) — are analyzed shortly. The initial assumption on positivity of internal energy of deformation is saved and then the uniform stress states (unilateral tension, omnilat
APA, Harvard, Vancouver, ISO, and other styles
43

Major, Izabela, and Maciej Major. "Modeling of Wave Propagation in the ADINA Software for Simple Elastic Structures." Advanced Materials Research 1020 (October 2014): 171–76. http://dx.doi.org/10.4028/www.scientific.net/amr.1020.171.

Full text
Abstract:
The paper presents the waves propagation (disturbances) in the simple elastic structures aided by ADINA program. Modeling of the waves was performed in a rod and the elastic layer. The elastic structures being analyzed have been made of isotropic compressible and incompressible materials which represent hyperelastic materials, i.e. with a strictly defined elastic potential description. Conclusions are presented in the summary at the end of the study.
APA, Harvard, Vancouver, ISO, and other styles
44

Krowne, Clifford M., and Maurice Daniel. "Electromagnetic Field Behavior in Dispersive Isotropic Negative Phase Velocity/Negative Refractive Index Guided Wave Structures Compatible with Millimeter-Wave Monolithic Integrated Circuits." Journal of Nanomaterials 2007 (2007): 1–11. http://dx.doi.org/10.1155/2007/54568.

Full text
Abstract:
A microstrip configuration has been loaded with a dispersive isotropic left-handed medium (LHM) substrate and studied regarding its high frequency millimeter-wave behavior near 100 GHz. This has been accomplished using a full-wave integral-equation anisotropic Green's function code configured to run for isotropy. Never before seen electromagnetic field distributions are produced, unlike anything found in normal media devices, using this ab initio solver. These distributions are made in the cross-sectional dimension, with the field propagating in the perpendicular direction. It is discovered th
APA, Harvard, Vancouver, ISO, and other styles
45

Kimura, Tsunehisa, Shinpei Okamoto, and Taichi Uemura. "Magnetic Alignment of Magnetically Isotropic Diamagnetic Rod-like Particle in Modulated Magnetic Field." Japanese Journal of Applied Physics 46, no. 2 (2007): 586–88. http://dx.doi.org/10.1143/jjap.46.586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Zhou, Jian-Jun, Jing Li, Ya-Qin Fu, Zhi-Shan Bo, Lin Li, and Chi-Ming Chan. "Rod-like crystal growth of dioctyl substituted polyfluorene from nematic and isotropic states." Polymer 48, no. 9 (2007): 2503–7. http://dx.doi.org/10.1016/j.polymer.2007.02.033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Hentschke, R., and M. J. Kotelyanskii. "Compressive strength of a rigid-rod polymer fibre embedded in an isotropic matrix." Journal of Materials Science 30, no. 7 (1995): 1642–52. http://dx.doi.org/10.1007/bf00351592.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

Wang, Ran, Xuegang Yuan, Hongwu Zhang, Jie Xu, and Jing Zhang. "Some Interesting Traveling Waves in a Transversely Isotropic Incompressible Hyperelastic Semi-infinite Rod." Acta Mechanica Solida Sinica 31, no. 6 (2018): 698–716. http://dx.doi.org/10.1007/s10338-018-0030-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Łoś, Joanna, Aleksandra Drozd-Rzoska, Sylwester J. Rzoska, Szymon Starzonek, Krzysztof Czupryński, and Prabir Mukherjee. "Near-continuous isotropic – nematic transition in compressed rod-like liquid crystal based nanocolloid." Journal of Molecular Liquids 382 (July 2023): 121844. http://dx.doi.org/10.1016/j.molliq.2023.121844.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Yan, Biao, Daniel Martínez-Fernández, Katerina Foteinopoulou, and Nikos Ch Karayiannis. "Molecular Simulation of the Isotropic-to-Nematic Transition of Rod-like Polymers in Bulk and Under Confinement." Polymers 17, no. 12 (2025): 1703. https://doi.org/10.3390/polym17121703.

Full text
Abstract:
We conduct extensive Monte Carlo simulations to investigate the factors that control the isotropic-to-nematic transition of hard colloidal polymers in bulk and under various conditions of confinement. Utilizing a highly idealized model, polymers are represented as linear chains of tangent hard spheres of uniform length, whose stiffness is controlled by a bending potential leading to rod-like configurations. Confinement is realized through the presence of flat, parallel, and impenetrable walls in one, two, or three dimensions while periodic boundary conditions are applied on the unconstrained d
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!