Relevant bibliographies by topics / Jednoosá pevnost v tlaku

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Jednoosá pevnost v tlaku'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Jednoosá pevnost v tlaku.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Jednoosá pevnost v tlaku"

1

Wasserbauer, Jaromír. "Mechanické vlastnosti mikrostrukturních komponent anorganických materiálů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta chemická, 2013. http://www.nusl.cz/ntk/nusl-233368.

Full text
Abstract:
Disertační práce se zabývá studiem strukturních a mechanických vlastností anorganických materiálů. Cílem je nalezení jednotlivých fází ve zkoumaném materiálu a hlavně lokalizace (mechanicky) nejslabšího místa, jeho ovlivnění a následně výroba materiálu o lepších mechanických vlastnostech. Z důvodu velkého množství použitých metod je základní teorie vložena vždy na začátku příslušné kapitoly. Taktéž z důvodu značného množství výsledků jsou na konci kapitol uvedeny dílčí závěry. Práce je rozdělena na tři části, kdy první se zabývá seznámením s možnostmi modelování mikro-mechanických vlastností a provedením experimentů umožňujících posouzení rozsahu platnosti některého modelu. V druhé části je provedeno shrnutí současných možností indentačních zkoušek pro měření mechanických vlastností strukturních složek betonu a praktické zvládnutí metodiky vhodné k užití pro výzkum materiálů zkoumaných domovským pracovištěm. V třetí části je navržena metoda identifikace nejslabších článků struktury anorganických pojiv a její ověření na konkrétním materiálu zkoumaném na domovském pracovišti. V této dizertační práci jsou použity tyto metody: kalorimetrie, ultrazvukové testování, jednoosá pevnost v tlaku, nanoindentace, korelativní mikroskopie a rastrovací elektronová mikroskopie s energiově disperzním spektrometrem. Dílčími výsledky jsou kompletní charakterizace cementových materiálů, upřesnění stávajících poznatků a nalezení optimálního postupu pro charakterizaci. Hlavním výsledkem je inovativní přístup vedoucí k pozitivnímu ovlivnění materiálu.
APA, Harvard, Vancouver, ISO, and other styles
2

Uchytilová, Jitka. "Využití regresní analýzy a tvrdoměrných metod při vyhodnocování pevnosti betonu v tlaku v prefabrikovaných dílcích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2021. http://www.nusl.cz/ntk/nusl-433523.

Full text
Abstract:
This thesis deals with the rebound hammer method as a tool for approximation of the time limit for handling the concrete. The theoretical part is focused on three fields of knowledge - rebound hammer test, production of precast concrete components and statistical data analysis. The following practical part deals with the design of two single-parameter linear functions for two types of rebound hammer testers - SilverSchmidt L and SchmidtOriginal N. Statistical data processing is completed by the analysis of influential points by using the Cook’s distance. The resulting statistical models are compared with commonly used relationships.
APA, Harvard, Vancouver, ISO, and other styles
3

Kozáček, Vojtěch. "Experimentální stanovení závislosti parametrů NDT a pevnosti v tlaku betonu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409957.

Full text
Abstract:
The diploma thesis deals with non-destructive testing of concrete as well as with the relationship between determined parameters and the compressive strength of concrete. The thesis is mainly focused on the ultrasonic pulse velocity method and the rebound hammer test. The experimental part of the thesis describes non-destructive tests performed on concrete blocks. The compressive strength was tested on the drill cores taken from the concrete blocks. The aim of this thesis is to find regression models of the relationship between the compressive strength and non-destructive parameters, and the subsequent analysis of the results.
APA, Harvard, Vancouver, ISO, and other styles
4

Wasserbauer, Jaromír. "Lokální zkoušky mechanických vlastností materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2009. http://www.nusl.cz/ntk/nusl-216510.

Full text
Abstract:
This thesis deals with measurement of hardness and microhardness in relation to structure of homogeneous and heterogeneous materials. In the introduction basic theoretical background is commented, i.e. definitions, terminology, principles of measuring techniques for estimation of hardness, microhardness, tensile strength, compressive strength and bending strength. Follows a brief review of present research results focused on use of described principles in materials engineering. Then the experimental equipment and sample preparation is described. The crucial part of the thesis is summary of achieved results of original measurement and discussion of their relations to each other. Finally, the groundbreaking estimation is described, showing the correlation of chemical composition gradient and mechanical properties in interfacial zone of geopolymeric material.
APA, Harvard, Vancouver, ISO, and other styles
5

Vinter, Václav. "Latexy modifikované cementové materiály." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-216351.

Full text
Abstract:
In this thesis, the development of mechanical properties and structure of latex modified cementious materials during hydration was studied. Latex modified materials are composites of inorganic cement (portland cement) and organic polymer latex. Preparation, processing and fabrication of the polymer cement material based on portland cement was optimized with aim to reach the most compact structure of the product with the finest mechanical characters. The experimental part was pointed to observe influence of the type and amount of polymer latex with focus on mechanical characters and hydration kinetics with given filling as well as without it. In presented work, the possibility of compaction of the material by high-shear mixing within twin-roll mixer (the prototype for production of MDF composite) was verified. The second part of the labor was aimed to analysis of prepared polymer-cementitious material. For determination of influence of batching of added polymer latex on hydration of cement paste the thermal analysis (DTA/TGA) and infrared spectroscopy of composite was done. At last the microscopic observation by optical microscope was carried.
APA, Harvard, Vancouver, ISO, and other styles
6

Fójcik, Tomáš. "Vliv triaxiální deformace kameniva na vlastnosti betonu." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2009. http://www.nusl.cz/ntk/nusl-216555.

Full text
Abstract:
This diploma work takes focus in elastic modulus of unbound granular aggregates, which was determined by repeat load triaxial test and in deformation behaviour of unbound granular aggregates - elastic and plastic deformation. It was examine the propriety of this aggregate for its service as underlying granular material in pavement. Further, there was observed the influence of elastic modulus of unbound granular aggregates on concrete characteristics - compressive and bending strength. Finally, it was observed the influence of individual fractions of aggregates on its elastic modulus and strength of concrete.
APA, Harvard, Vancouver, ISO, and other styles
7

Hoduláková, Michaela. "Experimentální ověření modulu pružnosti v tlaku jemnozrnných kompozitů na bázi silikátových pojiv." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265508.

Full text
Abstract:
Since their inception, building materials are constantly improving. New ways to explore and improve the material's properties are constantly investigated (especially to improve the mechanical and deformation characteristics of the materials). This thesis is focused on identifying and comparing values of the modulus of elasticity of fine-grained composites. These features are compared with respect to water cement ratio, ageing and compressive strength of the investigated materials. Afterwards, the values of the modulus of elasticity are studied in the relation to the tested materials.
APA, Harvard, Vancouver, ISO, and other styles
8

Nedbalová, Radka. "Příprava a vlastnosti pěnových materiálů na bázi Bioskla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231661.

Full text
Abstract:
The work deals with the preparation and mechanical properties of coated Bioglass® 45S5 based foam materials with open porosity. The samples have been fabricated applying the replication method with use of polyurethane foam. Furthermore, these samples were coated in order to increase the strength characteristics and crack resistance. Polyvinylalcohol and PVA with cellulose microfibrils have been used as coating. Besides microstructural parameters of investigated materials using the SEM images strength characteristics in compression and in tension were also quantified.
APA, Harvard, Vancouver, ISO, and other styles
9

Myšičková, Lucie. "Vývoj a zkoušení vysokohodnotných betonů pro subtilní konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226971.

Full text
Abstract:
Thesis describes properties of HPC compared to concretes of normal and high strength. It further describes the input materials and the procedure for designing the composition of the mixture. It gives examples of already completed structures made of HPC. The experimental part describes the optimization of concrete mix and production of specimens. In the end results of testing the properties of the developed mixes from tests of dynamic and static modulus of elasticity, compressive strength and tensile strength by bending are described.
APA, Harvard, Vancouver, ISO, and other styles
10

Straka, Radek. "Studium použitelnosti písků pro přípravu porobetonu v hydrotermálních podmínkách." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2010. http://www.nusl.cz/ntk/nusl-216594.

Full text
Abstract:
A building industry is expanding branch all the time and it intervenes in the life of everyone. Aeroconcrete is very attractive and actual subject nowadays because economy is important point of view of production. This material finds a wide-spread use thanks to its specific properties. The good manipulation and great thermal insulating properties are secured by its porous structure. Furthermore, proper material selection provides a saving of power of house for every customer demands. Due to aeroconcrete's sufficient compressive strength it is useful for both constructions and internal walls. Fundamental and very important for final material properties is raw material composition of aeroconcrete. A relationship between composition of filler (quartz sand) and resultant properties of aeroconcrete is an objective of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Jednoosá pevnost v tlaku' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography