Dissertations / Theses on the topic 'Jet spinning'

This diploma thesis describes methods of textile fibers treatment, production levels with detailed focus on spinning process especially by Rieter AG in Winterthur, Switzerland, subsidiary company in Usti nad Orlici. Thesis also describes production materials and it’s behavior in relations to production machines. Analysis of the current solution, it’s pros and cons is also done. Setting of requirements of new solution. Creating proposals of design solutions of yarn keeper with mechanic clamp situated on spinning unit on Air-Jet machine. Creating concepts and proposal schemes. After choosing of best possible solution considering production costs, electric consumption during working machine and during active cycle was this variation produce. At the end is review of complete solution and prospective next steps in testing not only in laboratory and prospects of using in field.

Les prothèses vasculaires textiles en polyéthylène téréphtalate (PET) présentent souvent des occlusions après implantation pour les petits diamètres (6-8mm) car la surface des prothèses est peu hémocompatible. Or, l'hémocompatibilité des prothèses serait largement améliorée si ces dernières se recouvraient d'une couche de cellules endothéliales qui tapissent naturellement les vaisseaux sanguins. Ce projet vise à mettre en évidence que les textiles bruts ne sont pas un support viable pour le développement de ces cellules endothéliales, puis propose de remplacer les matrices protéiniques par un recouvrement synthétique. Pour ce faire, de l'acide poly-L-lactique (PLA) solubilisé a été filé sous forme de nanofibres déposées sur la surface luminale de la prothèse. L'étirage par jet d'air a été caractérisé selon un modèle plan, puis adapté à la fon11e tubulaire des prothèses. Les nanofibres ont été évaluées sur le plan de la cytocompatibilité, de l'adhérence et de la prolifération avec un modèle de cellules endothéliales animales. Ce travail vise aussi à optimiser l'adhérence de ces fibres sur le PET par l'emploi d'une technique de modification de surface par plasma. Les résultats montrent qu'il est possible de produire des nanofibres de PLA et de contrôler leur diamètre, et de sceller la paroi de la prothèse textile. Enfin, les cellules endothéliales prolifèrent en monocouche sur des prothèses recouve1tes de nanofibres. Il est possible d'optimiser l'adhérence des nanofibres sur le PET avec un traitement par plasma. En conclusion nous avons proposé une alternative à l'enduction traditionnelle des prothèses permettant la prolifération en monocouche des cellules endothéliales.

Carbon fiber is a lightweight, versatile material with many current and potential applications. To be able to expand the market for carbon fiber composites in other areas than special applications the production costs must be reduced. One way of accomplishing this could be to use a less expensive raw material where lignin is a good example as it can be provided at lower cost, is renewable and abundantly available compared to commercially used raw materials today. So far, the mechanical properties of lignin-based carbon fibers are inferior relative to commercial carbon fibers. For lignin-based carbon fibers to enter the commercial market more research is necessary to gain knowledge of the conversion of lignin to carbon fiber. The LightFibre project investigates the possibilities to produce carbon fibers based on a mixture of softwood kraft lignin and cellulose. The kraft lignin is isolated from black liquor in the kraft/sulfate process with the LignoBoost process. This master thesis project was conducted within in the LightFibre project and evaluated whether metal ions generally present in kraft lignin had an influence on the final carbon fiber quality in terms of mechanical properties and morphology. The mechanical properties were determined with tensile testing, the morphology by scanning electron microscopy (SEM) and the relative abundance of studied elements with electron dispersive spectroscopy (EDS). The influence of the chosen metal ions was tested by impregnation of dry-jet wet spun prefibers based on 70 wt.% softwood kraft lignin and 30 wt.% dissolving pulp cellulose. The fibers were impregnated in room temperature with solutions containing Na2SO4, K2SO4, MgSO4, FeSO4 and Al2(SO4)3 salts where the cations were the focus in these trials. The concentrations used for impregnation were 0.2 and 1M of the cations. The obtained mechanical properties of the carbon fibers of the samples impregnated with different metal ions did not deviate significantly from the reference which had a tensile strength of 870 MPa and tensile modulus of 68 GPa. The analysis of morphology with SEM showed no defects or damage of any of the fibers. Therefore, it was concluded that the impregnated metal ions: K+, Na+, Al3+, Mg2+ and Fe2+ at the obtained levels in the fibers cause no effects on the fibers during the stabilization and carbonization that affects the mechanical performance of final carbon fiber.  The amount of potassium in one of the samples was estimated to 0.1 wt.%. From the results of this study it may be suggested that the general recommendation of <0.1 wt.% ash in lignin can be exceeded, for dry-jet wet-spun kraft lignin/cellulose-based carbon fibers.

It is in the nature of the human species to find solutions of complex technical problems and always strive for improvements. The development of new materials is not an exception. One of the many man-made materials is carbon fibre (CF). Its excellent mechanical properties and low density have made it attractive as the reinforcing agent in lightweight composites. However, the high price of CF originating from expensive production is currently limiting CF from wider utilisation, e.g. in the automotive sector.   The dominating raw material used in CF production is petroleum-based polyacrylonitrile (PAN). The usage of fossil-based precursors and the high price of CF explain the strong driving force of finding cheaper and renewable alternatives. Lignin and cellulose are renewable macromolecules available in high quantities. The high carbon content of lignin is an excellent property, while its structural heterogeneity yields in CF with poor mechanical properties. In contrast, cellulose has a beneficial molecular orientation, while its low carbon content gives a low processing yield and thus elevates processing costs.   This work shows that several challenges associated with CF processing of each macromolecule can be mastered by co-processing. Dry-jet wet spun precursor fibres (PFs) made of blends of softwood kraft lignin and kraft pulps were converted into CF. The corresponding CFs demonstrated significant improvement in processing yield with negligible loss in mechanical properties relative to cellulose-derived CFs. Unfractionated softwood kraft lignin and paper grade kraft pulp performed as good as more expensive retentate lignins and dissolving grade kraft pulp, which is beneficial from an economic point of view.   The stabilisation stage is considered the most time-consuming step in CF manufacturing. Here it was shown that the PFs could be oxidatively stabilised in less than 2 h or instantly carbonised without any fibre fusion, suggesting a time-efficient processing route. It was demonstrated that PF impregnation with ammonium dihydrogen phosphate significantly improves the yield but at the expense of mechanical properties.   A reduction in fibre diameter was beneficial for the mechanical properties of the CFs made from unfractionated softwood kraft lignin and paper grade kraft pulp. Short oxidative stabilisation (<2 h) of thin PFs ultimately provided CFs with tensile modulus and strength of 76 GPa and 1070 MPa, respectively. Considering the high yield (39 wt%), short stabilisation time and promising mechanical properties, the concept of preparing CF from lignin:cellulose blends is a very promising route.
Det ligger i människans natur att hitta lösningar på komplexa tekniska problem, samt att alltid sträva efter förbättringar. Utvecklingen av nya material är inget undantag. Ett av flera material utvecklade av människan är kolfiber. Dess utmärkta mekaniska egenskaper samt låga densitet har gjort det attraktivt som förstärkningsmaterial i lättviktskompositer. Det höga priset på kolfiber, vilket härstammar ur en kostsam framställningsprocess, har förhindrat en mer utbredd användning i exempelvis bilindustrin.   Det dominerande råmaterialet för kolfiberframställning är petroleumbaserad polyacrylonitril (PAN). Användandet av fossila råvaror och det höga priset på kolfiber förklarar den starka drivkraften att hitta billigare och förnyelsebara alternativ. Lignin och cellulosa är förnyelsebara makromolekyler som finns tillgängliga i stora kvantiteter. Det höga kolinnehållet i lignin gör det mycket attraktivt som råvara för kolfiberframställning, men dess heterogena struktur ger en kolfiber med otillräckliga mekaniska egenskaper. Däremot har cellulosa en molekylär orientering som är önskvärd vid framställning av kolfiber, men dess låga kolinehåll ger ett lågt processutbyte som i sin tur bidrar till höga produktionskostnader.             Det här arbetet visar att många av de problem som uppstår med kolfiber från respektive råvara kan kringgås genom att utgå från blandningar av desamma. Prekursorfibrer från blandningar av kraftlignin och kraftmassa från barrved tillverkade med luftgapsspinning konverterades till kolfiber. Utbytet för kolfibrerna som framställdes var mycket högre än vid framställning från endast cellulosa. Ofraktionerat barrvedslignin och kraftmassa av papperskvalitet presterade lika bra som de dyrare retentatligninen och dissolvingmassan, vilket är fördelaktigt ur ett ekonomiskt perspektiv.   Stabilisering är det mest tidskrävande processteget i kolfibertillverkning. I det här arbetet visades det att prekursorfibrerna kunde stabiliseras på kortare än två timmar, eller direktkarboniseras utan någon sammansmältning av fibrerna. Detta indikerar att en tidseffektiv produktion kan vara möjligt. Impregnering av prekursorfibrerna med ammoniumdivätefosfat ökade utbytet avsevärt, men med lägre mekaniska egenskaper som bieffekt.           Kolfibrernas mekaniska egenskaper ökade vid en diameterreduktion. En kort oxidativ stabilisering under två timmar i kombination med tunna prekursorfibrer gav kolfiber med en elasticitetsmodul på 76 GPa och dragstyrka på 1070 MPa. Att göra kolfiber från blandningar av lignin och cellulosa är ett lovande koncept om det höga utbytet (39%), den korta stabiliseringstiden samt de lovande mekaniska egenskaperna tas i beaktande.

QC 20190226

In this article, we look at a model with (independent) system operator who faces stochastic but growing transmission demand and a penalty if frequency is not balanced. In this set up, we derive an optimal grid expansion investment strategy and analyze its value and risk implications. It turns out that the firm value is strictly concave in the level of transmission demand. Firm value, however, increases with optimal investment for any level of demand. Moreover, firm risk is decreasing in the level of demand and higher when the firm has an investment option. The risk increase corresponds to the exercise of the call option and is stronger, the closer the firm approaches its exercise trigger. (author's abstract)
Series: Working Papers / Research Institute for Regulatory Economics

A study of the influence of the drying process in developing fiber properties during the dry-jet wet spinning of poly (p-phenylene benzobisthiazole) is undertaken. The fiber's structure and mechanical characteristics from the coagulated state through the drying process to the as-spun and heat treated state are investigated herein. The wet fiber is composed of a swollen macro and microfibrillar network of highly oriented molecules with lateral but no longitudinal order and exhibits a high degree of mechanical anisotropy. The structural and mechanical features of the as-spun fiber appear to develop during coagulation. The drying process during drying is characterized by a distinct radial contraction and axial elongation due to the porous and anisotropic nature of the coagulated fiber. Alterations in the structure and mechanics of PBT fibers are observed upon drying which is rationalized in terms of the collapse process. The drying process is a fiber modification phase. High temperature and tension are employed to optimize the driving force toward property enhancement during the drying stage. Tension during drying straightens the wet fibrillar network while offsetting axial compressive internal stresses whereas the use of high temperature increases the extent of the lateral molecular order and increases molecular orientation resulting in enhanced tensile properties. The compressive strength and shear modulus increase after drying suggesting that removal of water may serve to enhance lateral interactions within the swollen fibrillar network inhibiting shear and compressive deformation and the onset of buckling instabilities. Further increases in the compressive strength through high tension and temperature drying are not achieved since further enhancements in intermicrofibrillar and fibrillar associations are speculated to be minimal. A force-temperature (F-T) technique is implemented to study thermal expansion characteristics of these rigid rod aromatic fibers through examination of the reversible F-T behavior. Subsequent mass loss and microstructural changes during the F-T experiment (an effective post processing heat treatment) is detected from irreversible F-T effects. An assessment of the effectiveness of the initial drying and heat treatment processing to induce thermal stability and material alterations is obtained through this F-T technique.

abstract: Polymer fibers have broad applications in wearable electronics, bulletproof vests, batteries, fuel cells, filters, electrodes, conductive wires, and biomedical materials. Polymer fibers display light density and flexibility but are mostly weak and compliant. The ceramic, metallic, and carbon nanoparticles have been frequently included in polymers for fabricating continuous, durable, and functional composite fibers. Nanoparticles display large specific areas, low defect density and can transfer their superior properties to polymer matrices. The main focus of this thesis is to design, fabricate and characterize the polymer/nanocarbon composite fibers with unique microstructures and improved mechanical/thermal performance. The dispersions and morphologies of graphene nanoplatelets (GNPs), the interactions with polyvinyl alcohol (PVA) molecules and their influences on fiber properties are studied. The fibers were fabricated using a dry-jet wet spinning method with engineered spinneret design. Three different structured fibers were fabricated, namely, one-phase polymer fiber (1-phase), two-phase core-shell composite fiber (2-phase), and three-phase co-axial composite fiber (3-phase). These polymer or composite fibers were processed at three stages with drawing temperatures of 100˚C, 150˚C, and 200˚C. Different techniques including the mechanical tester, wide-angle X-Ray diffraction (WAXD), scanning electron microscope (SEM), thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC) have been used to characterize the fiber microstructures and properties.
Dissertation/Thesis
Masters Thesis Mechanical Engineering 2018

abstract: Precursors of carbon fibers include rayon, pitch, and polyacrylonitrile fibers that can be heat-treated for high-strength or high-modulus carbon fibers. Among them, polyacrylonitrile has been used most frequently due to its low viscosity for easy processing and excellent performance for high-end applications. To further explore polyacrylonitrile-based fibers for better precursors, in this study, carbon nanofillers were introduced in the polymer matrix to examine their reinforcement effects and influences on carbon fiber performance. Two-dimensional graphene nanoplatelets were mainly used for the polymer reinforcement and one-dimensional carbon nanotubes were also incorporated in polyacrylonitrile as a comparison. Dry-jet wet spinning was used to fabricate the composite fibers. Hot-stage drawing and heat-treatment were used to evolve the physical microstructures and molecular morphologies of precursor and carbon fibers. As compared to traditionally used random dispersions, selective placement of nanofillers was effective in improving composite fiber properties and enhancing mechanical and functional behaviors of carbon fibers. The particular position of reinforcement fillers with polymer layers was enabled by the in-house developed spinneret used for fiber spinning. The preferential alignment of graphitic planes contributed to the enhanced mechanical and functional behaviors than those of dispersed nanoparticles in polyacrylonitrile composites. The high in-plane modulus of graphene and the induction to polyacrylonitrile molecular carbonization/graphitization were the motivation for selectively placing graphene nanoplatelets between polyacrylonitrile layers. Mechanical tests, scanning electron microscopy, thermal, and electrical properties were characterized. Applications such as volatile organic compound sensing and pressure sensing were demonstrated.
Dissertation/Thesis
Masters Thesis Materials Science and Engineering 2020

In this work, we study the galaxy cluster MS0735.6+7421 that hosts the most energetic observed active galactic nucleus (AGN) outburst so far. Explaining this very energetic AGN outburst is found to be challenging. McNamara et al. 2009 grappled with this problem and proposed two possible solutions: either the black hole (BH) must be an ultra massive one (with mass $> 10^{10} \ \text{M}_\odot$), or the efficiency of the mass to energy conversion ($\epsilon$) should be higher than the generally assumed value of $\epsilon \sim 0.1$. However, the efficiency of the mass to energy conversion depends on the BH's spin {Benson and Babul 2009}; higher $\epsilon$ can be achieved with a higher spinning BH. Here, we explore the second solution in detail, and ask the question: How did the BH spin up to the very high spins in advance of the outburst? We also explore the attendant physical processes, such as star formation, during the spin-up mode and investigate the associated observational implications. Comparing our results with what is generally expected from simulations and observational studies suggests that for all intents and purposes, the existence of an ultra massive BH is the simplest solution.
Graduate