Log in

Relevant bibliographies by topics / Jig and fixture / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Jig and fixture.

Dissertations / Theses on the topic 'Jig and fixture'

Author: Grafiati

Published: 5 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'Jig and fixture.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lazaro, Anthony de Sam. "An expert system for jig and fixture design." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329749.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Burra, Venkata Sai Vijay Krishna, and Vamsi Nallamothu. "Design and Structural Analysis of a Jig-Fixture Assembly for a Tail Wing." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-15804.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Purushothaman, Radhakrishnan. "Sensor based fixture design and verification." Link to electronic thesis, 2003. http://www.wpi.edu/Pubs/ETD/Available/etd-0121103-121815.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Malluck, John Andrew. "Prediction of ring deformation due to fixturing in the turning process." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/16772.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Satyanarayana, Srinath. "Fixture-workpiece contact modeling for a compliant workpiece." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17874.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hurtado, José Francisco. "Experimental study of workpiece-fixture contact forces and friction during machining." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/16096.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Boyle, Iain Mackinnon. "CAFixD: A case-based reasoning method for fixture design." Link to electronic dissertation, 2006. http://www.wpi.edu/Pubs/ETD/Available/etd-050406-131631/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Bo. "Analysis and synthesis of machining fixture-workpiece systems with multiple frictional contacts." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/15956.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Reams, Michael Lee Anthony. "An expedient method for performance evaluation of machining fixtures." Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/18925.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ghatpande, Puja Sudhakar. "Study of fixturing accessibilities in computer-aided fixture design." Worcester, Mass. : Worcester Polytechnic Institute, 2008. http://www.wpi.edu/Pubs/ETD/Available/etd-080808-195905/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Hurtado, José Francisco. "Modeling and analysis of conformability and static stability in flexible fixturing." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17368.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Farhan, Uday H. "An integrated computer-aided modular fixture design system for machining semi-circular parts." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2013. https://ro.ecu.edu.au/theses/555.

Full text

Abstract:

Productivity is one of the most important factors in manufacturing processes because of the high level of market competition. In this regard, modular fixtures (MFs) play an important role in practically improving productivity in flexible manufacturing systems (FMSs) due to this technology using highly productive computer numerical control (CNC) machines. MFs consist of devices called jigs and fixtures for accurately holding the workpiece during different machining operations. The design process is complex, and traditional methods of MF design were not sufficiently productive. Computer-aided de

APA, Harvard, Vancouver, ISO, and other styles

13

Golden, Christopher Lee. "Analysis of form errors in rings of non-uniform cross section due to workholding and machining loads." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/22703.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Schmitt, Robert Joseph. "The design of a flexible fixturing system." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17958.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Thawaba, Sami. "3D Printed Customized Tooling Development Approach." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-103412.

Full text

Abstract:

3D printing technologies have been gaining a lot of popularity in the last fifteen years, technologies like Fused Deposition Modeling (FDM) 3D printing have never been as accessible as they are today, and with the introduction of the desktop 3D printer, the technology is becoming a mainstream tool for developing prototypes and direct part production from a Computer-Aided Design (CAD) file. In an industrial context, the technology is utilized for different purposes, among which is the development and production of customized and task-specific tools. The proposed work in this thesis is an approa

APA, Harvard, Vancouver, ISO, and other styles

16

"Multi-rigid-body contact dynamics and haptic interaction for fixture loading planning." Thesis, 2005. http://library.cuhk.edu.hk/record=b6074023.

Full text

Abstract:

Dynamics Simulation Engine is the foundation of the whole system. The engine maintains a realistic dynamics scene in either automatic planning or haptic guided planning. It serves as an off-line verification of the planned motion so that the generated scheme can be 'played' with the engine. In this thesis, we developed a three-dimensional dynamics simulation engine based on an extension of the explicit time-stepping scheme and an application of the differential inclusion process introduced by J. J. Moreau. In the engine, we developed the contact propagation method for a general three-dimension

APA, Harvard, Vancouver, ISO, and other styles

17

Syu, Zih-Siang, and 許自翔. "Study of fixtures and jigs improvement of five-axis machining." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/3zp5ay.

Full text

Abstract:

碩士<br>國立勤益科技大學<br>資訊管理系<br>105<br>The global industries have been developing rapidly in recent years, products are created innovatively to meet market demands. However, as the increase of people in environmental awareness, leisure and sports and seeking for differences, forcing traditional manufacturing turn to automation, intelligence. The shafts and angles of a 5-axis processing machine are very sophisticated and shape of parts are often irregular, to maintain high-precision machining, high-precision positioning fixtures are the important tools for five-axis machining. The purpose of this st

APA, Harvard, Vancouver, ISO, and other styles

18

Kang, Wen-Kuang, and 康文光. "A study of design of automation machine and it's jigs and fixtures." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/47938890242415495064.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Nee, Andrew Y. C. "Computer-aided Tooling Design for Manufacturing Processes." 2003. http://hdl.handle.net/1721.1/3737.

Full text

Abstract:

Tooling design for manufacturing processes refers to direct tooling for making a part such as molds and dies for injection molded parts and metal stampings, or for supporting machining operations such as jigs and fixtures. This paper summarizes some of the R&D activities in those areas over a period of 20 years in the Department of Mechanical Engineering, National University of Singapore. It is notable that increasing use of computer tools has turned what is used to be known as a “black art” into a discipline embracing both heuristic and scientific analyses.<br>Singapore-MIT Alliance (SMA)

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!