Relevant bibliographies by topics / Jízdní zkoušky vozidla

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Jízdní zkoušky vozidla'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Jízdní zkoušky vozidla.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Jízdní zkoušky vozidla"

1

Cholasta, Lukáš. "Měření a porovnání jízdních parametrů vozidel v různých jízdních režimech." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-232481.

Full text
Abstract:
n this work is processed a summary of selected driving parameters of vehicles, methods of measuring and use in the automotive industry or related branch especially. This work is focused on driving tests of vehicles and measurement driving parameters of vehicles. As part of this work was done measurements parameters of vehicles driving in various driving regimes and subsequent analyse of obtained data. The result of this work is determination methodology division driving regimes and evaluation the impact of driving regimes on to ride a car in a directional curve.
APA, Harvard, Vancouver, ISO, and other styles
2

Tesař, Michal. "Dynamické parametry sportovního a konvenčního vozidla." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382225.

Full text
Abstract:
This master´s thesis is focused on chosen dynamic parameters of a sport vehicle represented by student formula Dragon 7 and comparison of these parameters with conventional vehicles represented by two exemplars of ŠKODA Superb III. Driving tests used for the comparison are simulating the real driving situations from the roads in order to possibly use those for the road accident analysis in the future. All the measurements were taken under lower adhesion conditions which might help solving of the road accidents under such conditions in the future. There is also a description of vehicle driving systems and components which have an influence on the vehicle´s driving dynamics incorporated in the thesis.
APA, Harvard, Vancouver, ISO, and other styles
3

Kalábová, Barbora. "Porovnání jízdních vlastností vozidel." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232736.

Full text
Abstract:
This thesis deals with the analysis of the car driving characteristics depending on the type of drive wheels. The first chapter defines the basic theoretical cars concept as well as procedures for determining the individual variables needed to identify the driving dynamics of vehicles. The practical part describes the plan and the progress of realized measurements on a selected pattern of vehicles, and the measured values are interpreted. The final part deals with the evaluation of the performed measurements and the data identified within these measurements.
APA, Harvard, Vancouver, ISO, and other styles
4

Poláš, Maroš. "Experimentální identifikace aerodynamických vlastností vozidla jízdní zkouškou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319863.

Full text
Abstract:
This thesis deals with road loads, coastdown tests and evaluation of measured data. Thesis consists of two main parts: theoretical and computational. The first part describes road loads with focus on aerodynamic drag and lift force. In the second part, a software tool for processing the measurement per ISO 10521-1 is designed and lift force measured with running resistance method is calculated.
APA, Harvard, Vancouver, ISO, and other styles
5

Kubík, Adam. "Vliv defektu pneumatiky na jízdní dynamiku vozidla." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-232857.

Full text
Abstract:
In this thesis, an effect of a tyre defect on the driving dynamics of a vehicle is dealt with. The first part of the thesis is mainly concerned with the vehicle dynamics, road resistance, adhesion, orientation characteristics of the tyres and slowing down. This chapter is followed by an overview of the manufacturing process and construction of modern passenger car tyres. The practical part is focused on driving tests that are used to demonstrate the influence of tyre defects on handling characteristics of the vehicle. The main focus of this thesis is on directional variation, braking distance, deceleration and lateral acceleration. The very end of the thesis concentrates on tyre defect in higher speeds and its after-effects as well as precautions for mitigation of these after-effects.
APA, Harvard, Vancouver, ISO, and other styles
6

Prachař, Roman. "Jízdní odpory vozidel." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-232514.

Full text
Abstract:
his thesis deals with the analysis of particular road resistances that affect the car. It describes their importance and factors that influence their size. This thesis defines steps that determine particular quantities that are necessary to assess road resistances. Describing, it qualifies transfer and sizes of driving force that is needed to overcome total road resistance, measuring methods of road range tests upon appropriation of road resistances and influence of road resistances on economy of traffic. Practical part discusses the plan and course of realized measuring of selected sample of cars. Final part deals with the evaluation of measured values of realized measuring.
APA, Harvard, Vancouver, ISO, and other styles
7

Horký, Martin. "Měření aerodynamických charakteristik vozidla na základě jízdních testů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231526.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Šabík, Matúš. "Analýza jízdních manévrů vozidel za snížené adheze." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241210.

Full text
Abstract:
This master’s thesis deals with driving maneuvers at low coefficient of adhesion, especially in winter season. It includes a list of adhesion coefficients on many surfaces, published by various authors. Figures were through the use of statistical methods divided into normal and exceeding. There are described terms having impact on adhesion. For determination of adhesion was used tests like emergency braking, circle test and slalom. The major part contains specification of used vehicles, surfaces, weather conditions, measuring devices and realized tests. In addition to using accelerometer, there was a successful attempt to use timekeeping facilities to determine deceleration of vehicle. Acquired data were processed and compared to another publications.
APA, Harvard, Vancouver, ISO, and other styles
9

Šujan, Tomáš. "Analýza jízdy osobního vozidla s přívěsem." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232737.

Full text
Abstract:
The subject of this thesis is the analysis of the negative effects associated with the operation of a trailer for a personal vehicle with respect to the design speed, technical checks and analysis related legislation. Its work is drawn from the measurement, cooperation with leading Czech production plant trailers Vezeko s.r.o., an organization engaged in the implementation of engineering controls DEKRA Automobil a.s. and available literature, including electronic resources. Results of the work end with proposals for specific measures to minimize the identified adverse effects.
APA, Harvard, Vancouver, ISO, and other styles
10

Černý, Martin. "Konstrukční návrh uložení měřící aparatury IMC ve vozidle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-377458.

Full text
Abstract:
Devices for measuring the dynamic load and vibration of certain parts of the bodywork or parts of other parts of the vehicle are made using accelerometers and measuring instruments IMC. It must be simply installed into the interior of the vehicle so that it is not necessary to remove any parts of the interior and to avoid damage to all parts of the interior. The preparation must also withstand the considerable dynamic load generated by the harder operation tests.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography