Relevant bibliographies by topics / Joint assembly

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Joint assembly'

Author: Grafiati
Published: 4 June 2021
Last updated: 28 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Joint assembly.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Joint assembly"

1

Zhang, Jian Hua, Da Wei Fu, and Xiao Jun Zhang. "Study on the Bearing Flexible Assembly by Three Joints Robot." Advanced Materials Research 422 (December 2011): 131–35. http://dx.doi.org/10.4028/www.scientific.net/amr.422.131.

Full text
Abstract:
Assembly is an important process in the manufacturing processes. For the badly self-adaptive and flexibility, the stuck phenomena and inefficient are often occurred with certain the assembly precision and fit, by using the robot for assembly. In this paper, the kinematics analysis of the three joints robot, which is used to assembly the bearing, is analyzed; the end joint movement angle formula is calculated. The force sensor is used during the assembly process. To ensure the assembly process, a new way is proposed to find the compliant assembly centre, which help the assembly robot to complic
APA, Harvard, Vancouver, ISO, and other styles
2

Hayman, Edward, and Clyde Neely. "Solving the Puzzle of Bolted Joints." Mechanical Engineering 133, no. 06 (2011): 48–52. http://dx.doi.org/10.1115/1.2011-jun-5.

Full text
Abstract:
This article discusses the various ways of solving the puzzle of bolted joint assembly. In 2001, The PCC-1-2000 Guidelines for Pressure Boundary Bolted Flange Joint Assembly presented with knowledge and practices specific to the assembly of bolted flange joints. The puzzle solution that came from this box was the most definitive to date and allowed those dealing with bolted joints to assemble the variables by methods that had been used successfully for many years by many people. This document is helping people across industry not only to assemble bolted flange joints, but also to establish joi
APA, Harvard, Vancouver, ISO, and other styles
3

Kuo, Chia Lung, and Jing Dae Huang. "Joint Design and Fabrication for Mechanical Elastic Self-deformation Micro-Assembly Technology." Materials Science Forum 505-507 (January 2006): 829–34. http://dx.doi.org/10.4028/www.scientific.net/msf.505-507.829.

Full text
Abstract:
A microstructure assembled into another part using the mechanical elastic self-deformation assembly technology is proposed in the paper. To attain the self-deformation during assembling, the assembly joint on the microstructure is analytically designed as the feature with an appropriate taper and cross clearance. Take account of the accuracy, the whole process from micro-fabrication to micro-assembly is carefully planned and practiced under a micro-EDM machining center system which consists of vertical micro-EDM with dividing mechanism, and horizontal micro-machining mechanism, which is referr
APA, Harvard, Vancouver, ISO, and other styles
4

Choodoung, Sakkarin, and Uttapol Smutkupt. "Analysis Design for Assembly by MTM-2 (Methods Time Measurement-2) for Wood Joints in Furniture." Advanced Materials Research 566 (September 2012): 394–98. http://dx.doi.org/10.4028/www.scientific.net/amr.566.394.

Full text
Abstract:
This research study assembly process of a study of Wood Joints with Motion Time Study MTM-2 (Methods Time Measurement-2) and DFA (Design for Assembly) an assessment of the ability to assembly in the Feeding and Fitting. with LUCAS Assembly Evaluation Method for the results of the assessment and find the good-bad points of the assessment was applied. Wood Joint Index for this analysis is the feeding and fitting should not exceed 2.5 The pivot of the three groups in terms of feeding Index did not exceed 2.5 The advantages of the assessments, when applied to the wood. In general, the nature of Wo
APA, Harvard, Vancouver, ISO, and other styles
5

Han, Yang, Guoqi Han, Dongqiao Li, Junfeng Duan, and Yewen Yan. "Numerical Simulation of Assembly Process and Sealing Reliability of T-Rubber Gasket Pipe Joints." Sustainability 15, no. 6 (2023): 5160. http://dx.doi.org/10.3390/su15065160.

Full text
Abstract:
Underground pipelines are vital parts to urban water supply, gas supply, and other lifeline systems, affecting the sustainable development of cities to a great extent. The pipeline joint, which is a weak link, may be seriously damaged during natural disasters such as earthquakes. The failure of pipe joints can cause leakage accidents, resulting in system failure and interruption, and even some secondary disasters. Herein, based on uniaxial and plane tensile test results of a T-rubber gasket material, the assembly process and sealing performance of a T-rubber gasket joint of a ductile iron pipe
APA, Harvard, Vancouver, ISO, and other styles
6

Hermansson, Thomas O. "Quality assured tightening of screw joints." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 230, no. 15 (2016): 2588–94. http://dx.doi.org/10.1177/0954406215602038.

Full text
Abstract:
Assembly of critical threaded connections such as safety belt and steering wheel screw joints must be quality assured to 100%. Not only the screw needs to be in position but the strength of the joint must also be guaranteed. To accomplish this, classical process surveillance is combined with angle monitoring and screws with special features. A plant system that keeps track on cars of various variants sends information to a screw joint controller that in turn sends a unique parameter set to the screw joint equipment. Together with so-called socket trays and balancing rules, the process arrangem
APA, Harvard, Vancouver, ISO, and other styles
7

Kim, Kyoung-Yun, Seongah Chin, Ohbyung Kwon, and R. Darin Ellis. "Ontology-based modeling and integration of morphological characteristics of assembly joints for network-based collaborative assembly design." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 23, no. 1 (2008): 71–88. http://dx.doi.org/10.1017/s0890060409000110.

Full text
Abstract:
AbstractThis paper presents our research on developing an ontology-based framework that can represent morphological characteristics related to assembly joints. Joints within the physical structure of an assembly are inevitable because of the limitations of component geometries and the associated, required engineering properties. Consequently, a framework is needed that can capture and propagate assembly design and joint information in a robust assembly model throughout the entire product development processes. The framework and model are based on an understanding of the morphological character
APA, Harvard, Vancouver, ISO, and other styles
8

Cheng, Liang, Qing Wang, and Yinglin Ke. "Experimental and numerical analyses of the shimming effect on bolted joints with nonuniform gaps." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, no. 11 (2018): 3964–75. http://dx.doi.org/10.1177/0954406218809139.

Full text
Abstract:
In order to investigate the effect of shim compensation for nonuniform gaps in aircraft assembly, the influence of the shims with different material and parameters on bolted joints is studied in this paper. According to the real material and assembly conditions of the aircraft joint structures, the specimen and experiment are designed to obtain the tensile performance of the joint structures with different shims. A three-dimensional finite element model, which incorporates the Johnson–Cook material property of the alloys, traction-separation law of liquid shims, contact relationships between t
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Shuaifa, Zhihua Gao, Sui Wang, Bin Chen, and Chaozeng Mao. "Study on the Seismic Response Characteristics of Shield Tunnels with Different General Segment Assembly Methods and Widths." Buildings 13, no. 8 (2023): 2039. http://dx.doi.org/10.3390/buildings13082039.

Full text
Abstract:
Shield tunnels assembled with general ring segments are widely used in urban areas. Segment assembly methods and widths cause changes in the mechanical properties of the structure and influence the seismic response of shield tunnels. To investigate the influence of the assembly method and width of the general ring segment on the seismic performance of a shield tunnel, a three-dimensional refined soil–structure dynamic interaction finite element model of the shield tunnel was established based on ABAQUS, and the mechanical response and joint deformation of the general ring lining under seismic
APA, Harvard, Vancouver, ISO, and other styles
10

Fan, Yang, Hu Changming, Feng Zhanying, Liu Min, and Wang Xumin. "Research on Connector Assembly System and Control Strategy for Large-scale Panel." Journal of Physics: Conference Series 2281, no. 1 (2022): 012010. http://dx.doi.org/10.1088/1742-6596/2281/1/012010.

Full text
Abstract:
Abstract There are technical requirements for the assembly of thousands of separate flange joints on the radar panel. The use of traditional manual assembly has problems such as high labor intensity, low assembly efficiency, and difficulty in uniform assembly quality. Therefore, in response to the above problems, combined with the requirements of high precision of joint assembly position and attitude, and intelligent management and control of the operation process, a set of joint component assembly system based on dual vision positioning, robot + ground rail + multi-axis module drive multi-gri
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Joint assembly"

1

Stimmell, K. G. "Advanced Joint Test Assembly (JTA) Telemetry System." International Foundation for Telemetering, 1987. http://hdl.handle.net/10150/615231.

Full text
Abstract:
International Telemetering Conference Proceedings / October 26-29, 1987 / Town and Country Hotel, San Diego, California<br>We design telemetry systems which instrument weapons in the Joint DoD/DOE flight test program. These telemetry systems gather data which can be used to determine if a weapon functioned as intended. Traditionally, a telemetry system has been designed to fit the individual requirements of each of the many weapons which have gone into production. The process of defining requirements, designing the system, and getting it into production with the quality assurance demanded of a
APA, Harvard, Vancouver, ISO, and other styles
2

Chemat, Rustam. "Analysis of threaded joint behavior in an airbag module assembly." Master's thesis, University of Central Florida, 1996. http://digital.library.ucf.edu/cdm/ref/collection/RTD/id/20934.

Full text
Abstract:
University of Central Florida College of Engineering Thesis<br>While some of think of our cars as simply "buckets of bolts", the proper design choices, applications, and assemblies of threaded fasteners/bolted joints play critical roles in automobile safety. Supplemental Restraint Systems (SRS), more commonly known as airbags, help prevent vehicle occupants from being thrown forward into the dashboard or windshield in the event of a collision. The components comprising the airbag, the inflator, the backing plate, and the cover are connected to each other, and to the vehicle, through a series
APA, Harvard, Vancouver, ISO, and other styles
3

Chang, Piyen. "Selection and evaluation of joint types and joining processes for concurrent assembly/disassembly-based design." Thesis, This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-09182008-063034/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nasco, Jr Dennis George. "Joint Effects of Communication Mode and Consensus on Virtual Team Decision Quality." OpenSIUC, 2010. https://opensiuc.lib.siu.edu/dissertations/223.

Full text
Abstract:
The purpose of this research study is to expand upon the body of knowledge and research regarding the conditions and processes for effective decision-making in virtual team environments. Specifically, this study sought to demonstrate that teams instructed in consensus produce higher quality decisions and attain the assembly effect (synergy) on complex decision tasks. In addition, teams in virtual communication environments will produce higher quality decisions and attain the assembly effect (synergistic decisions) less often than face-to-face teams on complex decision tasks. Mostly undergr
APA, Harvard, Vancouver, ISO, and other styles
5

Söderberg, Johan. "A finite element method for calculating load distributions in bolted joint assemblies." Thesis, Linköpings universitet, Mekanik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-81739.

Full text
Abstract:
Bolted joints are often the most critical parts with respect to fatigue life of structures. Therefore, it is important to analyze these components and the forces they are subjected to. A one-dimensional nite element model of a bolted joint is created and implemented as a program module in the Saab software `DIM', together with a complete graphical user interface allowing the user to generate the structure freely, and to apply both mechanical and thermal loads. Available methods for calculating fastener exibility are reviewed. The ones derived by Grumman, Huth and Barrois are implemented in the
APA, Harvard, Vancouver, ISO, and other styles
6

Ingvaldson, Anton. "Future Assembly : AURES - The intelligent assisting arm." Thesis, Umeå universitet, Designhögskolan vid Umeå universitet, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-125442.

Full text
Abstract:
The world is constantly changing and workers are forced to adapt to a pace that is more suitable for machines. In the Automotive Industry assembly line workers injuries keeps increasing despite major improvements in recent years. This is due to the cause that the marked demands more goods but to a lower cost. With this in mind, how can we create an aid for assembly line workers that could decrease repetitive strain injuries, facilitate flexibility and reduce the weight load on the workers joints? In this project I have explored the possibility to create new and intelligent aids for the assembl
APA, Harvard, Vancouver, ISO, and other styles
7

Bouaziz, Hamza. "Contrôle vibratoire des structures assemblées." Thesis, Université Paris-Saclay (ComUE), 2017. http://www.theses.fr/2017SACLC041/document.

Full text
Abstract:
Les structures aérospatiales sont de plus en plus légères, ce qui les rend sensibles aux vibrations. Pour ces structures le frottement pourrait fournir plus d’amortissement que les polymères d’une part à cause des températures extrêmes de fonctionnement (&lt;-20°C et &gt;100°C) et d’autre part parce qu’il est plus efficace que les absorbeurs actifs ou passifs à masse ajoutée qui ne sont pas adaptés aux problèmes sur larges bandes de fréquence, qui comprennent plusieurs fréquences propres. Pour que l’amortissement induit par frottement soit efficace, il faut asservir la charge normale aux ampli
APA, Harvard, Vancouver, ISO, and other styles
8

Drab, Tomáš. "Mechanické testování pájených spojů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219777.

Full text
Abstract:
The project contains theoretical research of electrotechnical manufacture for lead-free reflow soldering. It contains characterization of soldering processes. Includes variations of solder paste printing, principles of part placing and also reflow soldering process. The project appoints possibilities of testing solder joints strength, mainly focused on mechanical vibrations. It describes a design and preparation of solder joint strength test methods by mechanical vibrations. It compares influence of vibrations on part types and solder alloys.
APA, Harvard, Vancouver, ISO, and other styles
9

Gaussens, Clélia. "Solutions adhésives et durabilité d'une liaison structurale d'un capteur céramique sur un roulement acier." Thesis, Toulouse, INPT, 2010. http://www.theses.fr/2010INPT0112/document.

Full text
Abstract:
L'application industrielle (non développée pour des raisons de confidentialité) concerne un assemblage céramique/acier. Cette thèse s’inscrit dans un programme Européen et vise à développer un assemblage industriel fiable entre des substrats céramique et acier par le biais d’un adhésif structural. L’assemblage doit assurer une transmission des efforts sur une large gamme de température et malgré un environnement sévère. La méthodologie de travail a consisté à définir l’impact des paramètres des formulations d’adhésifs sur les propriétés initiales et la durabilité des assemblages. L’étude des p
APA, Harvard, Vancouver, ISO, and other styles
10

Berthou, Matthieu. "Fiabilité des assemblages sans plomb en environnement sévère." Phd thesis, Université Sciences et Technologies - Bordeaux I, 2012. http://tel.archives-ouvertes.fr/tel-00991011.

Full text
Abstract:
Le mémoire porte sur l'étude de la fiabilité des assemblages utilisant des alliages de brasure sans-plomb en environnement sévère pour des applications électroniques. Une méthode de préparation métallographique fiable et reproductible en vue de l'analyse microstructurale est présentée. L'effet du vieillissement thermique statique sur l'évolution microstructurale de billes de brasure en SAC, la tenue à la fatigue mécanique des assemblages brasés et l'étude de l'endommagement thermomécanique sont développés. Le seul effet notable constaté après vieillissement thermique est l'augmentation des épa
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Joint assembly"

1

Parliament, European, ed. ACP-EU Joint Assembly: Shared democracy. European Parliament, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Assembly, ASEAN Inter-Parliamentary Organization General. Joint communique of the thirteenth general assembly. ASEAN Inter-Parliamentary Organization, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

New York (State). Legislature. Assembly. Standing Committee on Housing. Joint-- Assembly Standing Committee on Housing, Assembly Subcommittee on Neighborhood and Rural Preservation: [hearing]. Associated Reporters International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

American Geophysical Union. Joint Assembly. AGU 2004 Joint Assembly: 17-21 May 2004, Montreal, Canada. American Geophysical Union, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Assembly, American Geophysical Union Joint. 2005 Joint Assembly: 23-27 May 2005, New Orleans, Louisiana. American Geophysical Union, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

American Geophysical Union. Joint Assembly. 2005 Joint Assembly: 23-27 May 2005, New Orleans, Louisiana. American Geophysical Union, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

1965-, Cook Cynthia R., and National Defense Research Institute (U.S.), eds. Final assembly and checkout alternatives for the joint strike fighter. Rand, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kentucky. General Assembly. Legislative Research Commission. and Kentucky General Assembly, eds. Mid-interim reports of the joint and special committees, 1988. Legislative Research Commission, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Missouri. General Assembly. Joint Committee on Budget Crisis. Report by the Joint Committee on Budget Crisis: 86th General Assembly. Missouri Senate, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Virginia. Governor (2014- : McAuliffe). The state of the Commonwealth address to the Joint Assembly 2014. Commonwealth of Virginia, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Joint assembly"

1

Keller, Joe. "Solder Joint Acceptability." In The Electronics Assembly Handbook. Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-13161-9_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lharchi, Ayoub, Mette Ramsgaard Thomsen, and Martin Tamke. "Joint Descriptive Modeling (JDM) for Assembly-Aware Timber Structure Design." In Proceedings of the 2021 DigitalFUTURES. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-5983-6_33.

Full text
Abstract:
AbstractJoints design is an essential step in the process of designing timber structures. Complex architectural topologies require thorough planning and scheduling, as it is necessary to consider numerous factors such as structural stability, fabrication capabilities, and ease of assembly. This paper introduces a novel approach to timber joints design that embed both fabrication and assembly considerations within the same model to avoid mistakes that might cause delays and further expenses. We developed a workflow that allows us to identify the fundamental data to describe a given joint geomet
APA, Harvard, Vancouver, ISO, and other styles
3

Ye, Wei, Yingzhou Gao, and Weiguo Xu. "A Parametric Wave Joint for Robotic Fabrication of Digital Stereotomy." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8405-3_38.

Full text
Abstract:
AbstractThis paper explores the potential of digital stereotomy in combination with robotic fabrication to increase the precision and complexity of stone processing. To enable the application of these techniques in outdoor environments, modular joints designed for robotic assembly are necessary. Additionally, the cutting process must be efficient and minimize material waste. To address these challenges, this research proposes a parametric wave joint design that enables rapid cutting and straightforward assembly by a robotic system. The joint contains motion space allowing it to slide into accu
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Qi, and Shunzhong Yao. "Seismic Performance Analysis of Non-uniformly Corroded Reinforced Concrete Column Assembly Joints Strengthened with CFRP." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_30.

Full text
Abstract:
AbstractIn order to analyze the seismic behavior of non uniformly corroded reinforced concrete column assembly joints strengthened with CFRP. In this paper, one corroded and unreinforced RC column specimen and four corroded but CFRP Reinforced RC column specimens were fabricated. According to the hysteretic curve, the skeleton curve change and stiffness degradation of each specimen are analyzed, and the load displacement condition of the assembled joint is judged. According to the strain of the assembled joint of reinforced concrete column, the ductility, energy consumption and other propertie
APA, Harvard, Vancouver, ISO, and other styles
5

Lau, John H., and Ning-Cheng Lee. "Solder Joint Characterization." In Assembly and Reliability of Lead-Free Solder Joints. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3920-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Suhir, E. "Reliability of Solder Joint Interconnections in Thermally Matched Assemblies." In Microelectronic Interconnections and Assembly. Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5135-1_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bickford, John H. "Behavior of a Bolted Joint During Assembly." In Handbook of Bolts and Bolted Joints, 2nd ed. CRC Press, 2025. https://doi.org/10.1201/9781003501183-28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Qiu, Chengyu, Peng Feng, Yue Yang, Lei Zhu, and Yu Bai. "Joint Capacity of Bonded Sleeve Connections for Tubular Fibre Reinforced Polymer Members." In Composites for Building Assembly. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-4278-5_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tianye, Ren, Chia Hui Yen, Zhan Yucheng, Zhang Jie, and Zhu Ning. "Research on 3D-Printed Standardized Small-Scale Architectural Model Joints." In Computational Design and Robotic Fabrication. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-3433-0_9.

Full text
Abstract:
Abstract This paper explores the design of standardized 3D-printed joints for small-scale architectural models, using the traditional mortise and tenon joint as a prototype. In comparison to traditional subtractive manufacturing for model production, 3D printing proves beneficial in saving time and materials. Therefore, many architectural students and design firms frequently use 3D printing for making models. Considering the limited size of 3D printers, convenience of transportation, and flexibility in demonstration, it is more advantageous to print model components with assembly joints rather
APA, Harvard, Vancouver, ISO, and other styles
10

Zhu, Weidong, Xiwen Zhang, and Liangliang Zhang. "Analysis of Deformation Characteristics of Large Diameter Shield Tunnel with Construction Load." In Lecture Notes in Civil Engineering. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_41.

Full text
Abstract:
AbstractWith the rapid development of the method of shield tunnel in our country, the shield in the tunnel and the internal structure exist a lot of prefabricated and assembled internal structure can be roughly divided into full cast-in-place, full precast, and precast and cast-in-place structure. However, it has the disadvantages of more internal structural joints, poor waterproof performance, and complex structural stress. Therefore, combined with the actual engineering case, the construction process is simulated by using the finite element analysis software, and the influence of the segment
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Joint assembly"

1

Jain, Puneet, Shotaro Yotsuya, Kosuke Nagashio, and Daisuke Kiriya. "Self-assembly of dopant molecules on MoS2 monolayer for degeneracy/heavily doping." In JSAP-Optica Joint Symposia. Optica Publishing Group, 2024. https://doi.org/10.1364/jsapo.2024.18a_a35_1.

Full text
Abstract:
Transition metal dichalcogenides (TMDs) are class of materials with general formula MX2, where M is transition metal element from group IV, V, and VI (Mo, W, etc.); while X is chalcogen (S, Se, or Te). As the thickness of TMD decreases from bulk to monolayer, 2D TMDs exhibits a series of specific properties. Among all TMDs, molybdenum disulfide (MoS2) is one of the few with a natural layered structure, indicating that MoS2 can be stripped easily using scotch tape, to obtain high-quality MoS2 monolayer, without complicated chemical synthesis. MoS2 monolayer is an emergent semiconductor having a
APA, Harvard, Vancouver, ISO, and other styles
2

Brown, Warren. "Efficient Assembly of Pressure Vessel Bolted Joints." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-2635.

Full text
Abstract:
This paper details the results of recent testing and experience into the assembly of bolted joints. Pressure boundary bolted joint assembly procedures are examined and details are presented that result in a reduction in the required effort to assemble any given joint by more than 50%. The selection of correct assembly load levels is addressed and suggestions for joint integrity improvement are made. Experimental results are also presented on the use of bolt lubricants and the effect of temperature on the lubricant properties.
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, David E., and H. Thomas Hahn. "Assembly Modeling and Analysis of Integral Fit Joints for Composite Transportation Structures." In ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/fas-1362.

Full text
Abstract:
Abstract In order to reduce assembly complexity and enhance the performance of structural elements utilized in transportation systems, a novel approach is presented that uses integral fit joints in the assembly of fiber-reinforced composite structural elements. While the application of composite materials in transportation structures is not new or unique, their use coupled with integral fit joint designs affords a multi-magnitude reduction in the number of components required to assemble transportation systems. Essential to this effort is the need to effectively model and analyze the composite
APA, Harvard, Vancouver, ISO, and other styles
4

Song, Xuan, and Yong Chen. "Joint Design for 3-D Printing Non-Assembly Mechanisms." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-71528.

Full text
Abstract:
The layer-based additive manufacturing (AM) processes can directly fabricate sub-systems with multiple components during the building process. Novel applications in robotics and many others have been demonstrated by removing the need of component assembly. However, the AM processes also have inferior accuracy compared to the Computer Numerical Control (CNC) machining process. Hence the joint clearance that can be achieved in a 3D-printed mechanism is large. This would significantly limit the use of AM in directly building movable sub-systems without further assembly operations after the buildi
APA, Harvard, Vancouver, ISO, and other styles
5

Lyu, Naesung, and Kazuhiro Saitou. "Decomposition-Based Assembly Synthesis of Space Frame Structures Using Joint Library." In ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/detc2004-57301.

Full text
Abstract:
This paper presents a method for identifying the optimal designs of components and joints in the space frame body structures of passenger vehicles considering structural characteristics, manufacturability and assembleability. Dissimilar to our previous work based on graph decomposition, the problem is posed as a simultaneous determination of the locations and types of joints in a structure and the cross sections of the joined structural frames, selected from a predefined joint library. The joint library is a set of joint designs containing the geometry of the feasible joints at each potential
APA, Harvard, Vancouver, ISO, and other styles
6

Kumakura, Susumu, and Kumiko Saito. "Tightening Sequence for Bolted Flange Joint Assembly." In ASME 2003 Pressure Vessels and Piping Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/pvp2003-1867.

Full text
Abstract:
Bolted flange joint assembly has been widely used in chemical and nuclear plants. Insufficient bolt loads in the bolted flange joints lead to serious accidents. The insufficient bolt loads are due to inappropriate bolt tightening methods in many cases. In order to obtain target bolt loads by the torque control method, it is especially important to know a torque coefficient and an appropriate tightening sequence. Another problem exists because where mating flanges are tightened by multiple bolts. It is known that it is extremely difficult to obtain a uniform bolt loads among the multiple bolts.
APA, Harvard, Vancouver, ISO, and other styles
7

Rudnick, Fredrick C. "Assembly Simulation for Joint Strike Fighter." In Aerospace Manufacturing Technology Conference & Exposition. SAE International, 1998. http://dx.doi.org/10.4271/981851.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Delrobaei, Mehdi, and Kenneth A. McIsaac. "Docking joint for autonomous self-assembly." In 2008 Canadian Conference on Electrical and Computer Engineering - CCECE. IEEE, 2008. http://dx.doi.org/10.1109/ccece.2008.4564692.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ching-Tsung Lin, Chi-Shiung Hsi, Tao-Chih Chang, and Ming-Kann Liang. "Solder joint strengths and interfacial reactions in various Pb-free solder joints." In 2007 International Microsystems, Packaging, Assembly and Circuits Technology. IEEE, 2007. http://dx.doi.org/10.1109/impact.2007.4433567.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dupre, Ross. "Impact of BFJA Training on Bolted Flange Joint Assembly Reliability." In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93679.

Full text
Abstract:
Abstract A bolted flange joint assembly is a complex mechanical device, according to ASME PCC-1. A complex mechanical device’s reliability depends on many activities being performed prior and during the assembly of the bolted flange joint assembly (BFJA) being assembled. Some of these activities being; required torque calculations; gasket material selection, fastener selection, type of flange, fastener condition, lubrication, and maybe the most important activity being the assembly of the bolted flange joint. How does one ensure the correct methods and best practices being used during the asse
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Joint assembly"

1

Berry, Nina M., Donald A. Sheaffer, Rene Lynn Bierbaum, et al. Smart sensor technology for joint test assembly flights. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/918324.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rimpel. PO-316-10208-R01 Guideline for Assembly and Maintenance of Bolted Joints in High Vibration Environments. Pipeline Research Council International, Inc. (PRCI), 2011. http://dx.doi.org/10.55274/r0010984.

Full text
Abstract:
This guideline is intended to provide a practical review of installation and maintenance practices for bolted joints that will minimize the likelihood of leakage or joint failure. The guideline addresses topics such as preload selection, installation tools, lubrication, gaskets, assembly procedures, preload verification tools, maintenance procedures, and vibration loosening. The guideline is designed to provide engineers and technicians with the knowledge necessary for successful assembly and maintenance of bolted joints. Use with caution. GMRC decided to pull this document from circulation du
APA, Harvard, Vancouver, ISO, and other styles
3

Jeff Smith. Streamlined Approach for Environmental Restoration Work Plan for Corrective Action Unit 461: Joint Test Assembly Sites and Corrective Action Unit 495: Unconfirmed Joint Test Assembly Sites Tonopah Test Range, Nevada. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/8268.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, Kent S., and Bernice E. Mills. Leak testing sabritec connectors for use in the W87 Joint Test Assembly 4 telemetry plug. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1055594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Le Coq, Annabelle G., Christian M. Petrie, Kory D. Linton, and Christian P. Deck. Assembly of Capsules for Irradiation of Silicon Carbide Joint Specimens in the High Flux Isotope Reactor. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1615793.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Smith, J. L. Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 461: Joint Test Assembly Sites Tonopah Test Range, Nevada. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/752098.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dan Tobiason. Streamlined Approach for Environmental Restoration Closure Report for Corrective Action Unit 495: Unconfirmed Joint Test Assembly Sites Tonopah Test Range, Nevada. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/750434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Thomstatter, John. Final Joint Test Protocol JP-P-1-1 for Validation of Alternatives to Lead-Containing Dry Film Lubricants for Antigalling/Antifretting, Antiseizing, and Assembly Aid Applications. Defense Technical Information Center, 2004. http://dx.doi.org/10.21236/ada473657.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kinser, Ryan, Mark Barkey, Timothy Rushing, et al. Computationally efficient modeling of lightweight expeditionary airfield surfacing systems at large length scales. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48266.

Full text
Abstract:
Expeditionary airfield matting systems are lightweight, portable surfaces that enable the rapid deployment of infrastructure to support aircraft operations. Individual matting components are assembled via interlocking joints to construct arrays that serve as temporary aircraft operating surfaces. The paper outlines the homogenization of the AM2 portable airfield matting system and its interlocking mechanisms to permit computationally efficient analyses toward understanding mechanisms that influence the global behavior of these arrays and underlying subgrade during aircraft maneuvers. An equiva
APA, Harvard, Vancouver, ISO, and other styles
10

Dinallo, M. S., and R. J. Fisher. Voltages across assembly joints due to direct-strike lightning currents. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10190346.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Joint assembly' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography